Search Results

Search found 10481 results on 420 pages for 'port mirroring'.

Page 29/420 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Add SATA Port to Motherboard?

  - by YAS

  I recently took off the bottom covers to my laptop, an Aspire 6930, and one of the covers was hiding an empty space large enough for a second hard drive. The bit of motherboard that was showing had the solder joints for a SATA port, but no port. What I'm wondering is; If I get a spare SATA port and solder it in would it mess up my motherboard and kill my laptop? I'm not concerned about a clean solder job, I can do that. But if the port is soldered in cleanly if there would be any danger to doing it. It'd be pretty darn awesome to get a second hard drive in my laptop.

  Read the article

• Utility to listen on port (Windows 2003 Server)

  - by Gero

  Hi, I need to validate some network connectivity from machine X to a Windows 2003 Server machine. To be able to do so I'm looking for a simple utility that I can run on the Windows 2003 server that will listen on a specified port. It does not have to do anything else. When it listens on the specified port I can do a telnet to that port from machine X and check if all firewalls are open. The Windows 2003 Server machine is already a production machine so I cannot install all kinds of stuff. At this stage we want to ensure that all network connectivity is in place before we do the installation of the 'real' application that will listen that port (don't want to wast time debugging network connectivity issues when we do the actual deployment of the new application. The utility should be a simple command line utility that does not require any installation. What utilities do you recommend? Thanks, Gero

  Read the article

• Kill UDP port that has no process?

  - by Chocohound

  I can't bind to UDP port 500 from my code (yes I'm running w/ sudo). The port is reported as "already in use" (Mac os X), but doesn't have an associated process: $ sudo netstat -na | grep "udp.*\.500\>" udp4 0 0 192.168.50.181.500 *.* udp4 0 0 192.168.29.166.500 *.* But sudo lsof doesn't show a process on port 500 (ie sudo lsof -i:500 -P reports nothing). How can I unbind port 500 so I can use it again? I believe I have a bad VPN client that isn't cleaning up after itself, but I can't get rid of this without rebooting the machine.

  Read the article

• How to specify multiple HostName/Port combinations in .ssh/config

  - by leoluk

  I have multiple notebooks and workstations which pull and push from multiple Mercurial repositories on a central server. I usually use .ssh/config to set an alias: Host repo-server HostName server.somedomain User user143 IdentityOnly yes IdentityFile ~/hgkey Port 156 ... and some more options, you get the idea. I can then simply do a hg push ssh://repo-server//hgroot/someproject on every local repository, and I can change the server address and port in one place. For workstations, this works fine, but the notebooks can access the server either from inside the network or from outside, using a different address and a different port. Is there any way I can specify multiple HostName/Port combinations so that SSH automatically tries them in order? This way, the users could push and pull without having to care about the correct address. (of course, using a VPN would be the most correct solution)

  Read the article

• How to continue an HTTrack mirroring session from the command line?

  - by isme

  I want to drive my mirroring project using the Command Prompt instead of the WinHTTrack interface so that I can script and schedule the mirroring session more easily. The output of httrack --help gives a simple command for continuing an interrupted mirroring session: example: httrack --continue continues a mirror in the current folder When I try httrack --continue in my HTTrack project folder, all I get is output like this: Example: -%F "<!-- Mirrored from %s by HTTrack Website Copier/3.x [XR&CO'2010], %s -->" * Option %F needs to be followed by a blank space, and a footer string With each parameter on a new line for readability, the first line of my doit.log file looks like this: -qiC1%P0s0b0u1j0%s%u0N0%I0p1DaK0c1T30H0%kf2E1800A25000%c0.1%f#f -F "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)" -%F "" -%l "en, en, *" http://saa.gov.uk/search.php?SEARCHED=1&SEARCH_TABLE=council_tax&SEARCH_TERM=City+of+Edinburgh&DISPLAY_COUNT=100 -O1 "C:\\Users\\Iain\\Projects\\Council Tax Analysis\\Code\\HTTrack\\Council Tax Valuation List" -* \ +*search.php?SEARCHED=1* -*DISPLAY_MODE=FULL* The parameter %F "" should tell HTTrack to use an empty footer. I used the WinHTTrack interface to create the project and start the mirroring session. I can interrupt and continue the mirroring session using the interface. The HTML files saved by WinHTTrack have no footer.

  Read the article

• Windows VPN client connect on different port

  - by John Gardeniers

  Scenario: Two Windows Server 2003 machines running RRAS VPNs. The firewall port forwards 1723 to one of those machines for normal remote access. I'd like to find a way to connect to the second machine as well. Not because I need to but just because it's the sort of thing I reckon should be possible but can't figure out how to do. Is it possible to have the Windows PPTP VPN client (on XP in this instance) connect on a port other than 1723? If so, I can simply port forward another port to the second server. I've done a fair bit of Googling over the last few days and have only found others asking the same question but no answers. I have of course tried to add a port number in the host name or IP connection box, in various formats, but to no avail. While this might be possible with a third part client I'm really only interested in whether or not it can be done with the Windows built-in client and if so how?. Perhaps there's a registry hack I'm not aware of?

  Read the article

• Portforwarding Combine Several Ports

  - by kiraitachi

  Hi I got a Raspberry Pi at A.A.A.B in my local network and I have set up a DMZ on my router so that any incoming traffic that comes to my router gets redirected to my raspberry pi wich I can connect via NO-IP adress. The problem is that I want to set up portforwarding since i got several services running on my Pi like SSH, torrent webgui, webalbum, etc. I had this already done before long time ago, but I forgot a bit the syntax and cant get to set it up. Router Help says: The Application allows you to do port forwarding, but only have the ports open when data flowing out of the trigger ports. When a program sends data out on outgoing ports called trigger ports, the device then allows incoming data on the open ports specified in your port triggering configuration. 1.Trigger Port Start Trigger Port Start Specify the start port on the device that would trigger the device to open ports for incoming data. 2.Trigger Port End Specify the end port on the device that would trigger the device to open ports for incoming data. You can enter a port number the same as the trigger port start or enter a larger port number to specify a port range. 3.Trigger Traffic Protocol Type Select the trigger traffic type. Open Port Specify all the ports to be opened. It's content could be: A single port only. A port range only. Start open port number and end port number should be separated by "-" . Combined several single port and several port ranges. Each single port or port range should be separated by "," . Open Traffic Protocol Type Select the open traffic type. This are the fields: http://es.tinypic.com/view.php?pic=n5lv1k&s=8 I think this is the syntax 1-7999,8001-9090,9092-65535. But each time I want to add it gives me an error. Any ideas?

  Read the article

• Trunking at Router Port

  - by singh

  After reading a bit about interVLAN routing got a doubt regarding how trunking takes place at router and at switch.In case of switch we configure a port interface as trunk port and say all vlan's are allowed here but in case of router we configure sub interface as trunk saying particular vlan belongs to particular subinterface .Can't we configure only a single port interface on router just like Switch and say all vlan's are allowed here on this interface ,why to go for sub interfaces? Hope I'm able to put my question in right way.

  Read the article

• SMTP redirecting to other port than 25

  - by Roalt

  How can you redirect your smtp traffic to another port than 25? My ISP blocks incoming traffic to port 25. I've been using ZoneEdit.com for this purpose for years (incoming mail traffic goes to another port and I redirect it via my firewall internally to port 25), but with the new system I cannot do it anymore. I'm not sure if I can do this by configuring MX and A records in the right way or if I need a SMTP redirecting service (such as rollernet.us)? I'm not an expert in Zone records but generally I know my way around for website traffic.

  Read the article

• Iptables - Open Port Only for one Server IP (allow connections from a specific range)

  - by user1015314

  My server has multiple IPs, 1.1.1.1 1.1.1.2 and i have a service which listens to a port e.g. 88 Now i want, when somebody from outside, wants to connect to the port, that he can only connect, to that port, if he connects to the ip 1.1.1.2:88 but if he tries to connect to 1.1.1.1:88 it should not react and it should look like that it dont exists and drops all connections. Ok, than i need for 1.1.1.2:88 that only allows a specific ip range outside connecters. for example only 9.*.*.* can connect to that port and ip. I'm using Centos. Thank you for your help.

  Read the article

• identify a router that cuts certain port

  - by Sergiks

  Is there a way to identify which particular router between me and some server blocks connections on certain port? I am in a hotel in Thailand, where they have recently changed some settings in their equipment, and now I cannot reach any of my servers in Europe and USA by SSH / port 22. More traditional ports like 80 or 21 are open. traceroute command shows each particular router in the middle. But is there a way to identify one that filters out port 22?

  Read the article

• Can not open port 3306 on Ubuntu using iptables

  - by user94626

  I am trying to open port 3306 (for remote mysql connections) on my ubuntu 12.04 server machine but for the life of me can't get the damned thing to work! Here is what I did: 1) list current firewall rules: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 225 16984 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 220 69605 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 486 54824 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 4 208 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 4 208 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 735 182K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 225 16984 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 2) try to connect from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect 3) try to add a new rule to iptables: iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT 4) make sure the new rule is added: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 359 25972 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 251 78665 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 628 64420 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 5 260 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 5 260 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 919 213K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 359 25972 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 which appears to be the case (last line in "Chain INPUT" section). 5) try to connect again from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect which is failing again. 6) try to flush all rules: $> sudo iptables -F 7) this time I CAN CONNECT. 8) reboot server and try to connect, FAILURE. I suspect since the new rule is being appended at the end it will have no effect as there appears to be a "reject all" sort of rule before it. If this is the case, how to make sure the new rule is added in the right order? Otherwise, what am I missing? Please help.

  Read the article

• Redirect with iptables if destination port is not listened

  - by PoltoS

  I've a server listening on port 10000. But this server is running only in a special case (then some third service is available). Otherwise the port is not listened. Is it possible to redirect the client to another port if 10000 is not listening? I see two solutions: 1) insert/remove iptables rules on server start/stop, but since the server may be killed, it may not insert the correct iptable redirect rule before dieing. 2) make a permanent userspace rule that checks if the port is listening and redirects the packet if not listened. How to do 2) ? Do someone have recipes for ipq? May be someone can suggest me a better way? It is something like fallback redirect: I'll have thousand of clients with different ports (10000-11000) and if their instance of server is not running, whey should be redirected to some page explaining why they don't have and instance connected.

  Read the article

• how to monitor traffic at port 53 (DNS)

  - by Registered User

  I am a bit confused with the abundant tcpdump tutorials on internet. I am having a few of the virtual machines running on a virtualization server.Where I am debugging a problem.Port 53 is the one in problem. I have a bridged setup where out of 4 LAN cards on the machine in question one is active and it is xen-br0 I want to check if there is any request coming on port 53 on the server by other machines on LAN in question. I also want to see if the guest operating systems on LAN or any other machine is sending traffic at port 53.Due to abundant messages being generated via tcpdump I am finding it difficult to grep the output at desired port. So how can I use it if some one can give an example that would be helpful. Thanks in advance.

  Read the article

• USB 3.0 port with USB 3.0 device in Ubuntu 12.10

  - by fernando garcía

  When I try to connect a USB 3.0 device in Ubuntu 12.10 (ASUS K55VD, kernel 3.5.0-19-generic #30-Ubuntu SMP), the system says [ 74.747832] hub 3-0:1.0: unable to enumerate USB device on port 1 [ 74.931957] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 74.949390] usb 4-1: New USB device found, idVendor=05e3, idProduct=0731 [ 74.949396] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 [ 74.949400] usb 4-1: Product: USB Storage [ 74.949403] usb 4-1: SerialNumber: 0000000000000033 [ 75.033327] usbcore: registered new interface driver uas [ 75.038548] Initializing USB Mass Storage driver... [ 75.038651] scsi7 : usb-storage 4-1:1.0 [ 75.038700] usbcore: registered new interface driver usb-storage [ 75.038701] USB Mass Storage support registered. but it does not recognize the device, and the disks applications (gparted, nautilus) act as if nothing had been connected. I have checked other questions, but either they have no answers or they told about previous Ubuntu version with 3.0.x kernels. A USB 2.0 device will work in the USB 3.0 ports. A USB 3.0 device will work (at USB 2.0 speeds) in the USB 2.0 ports. The problem, as I wrote, is between USB 3.0 devices and USB 3.0 ports. I have my USB 3.0 ports configured without legacy support via the BIOS (the way they should be, I suppose). But I also have tried to configure them with XHCI Preboot mode disabled. Have any one solved a similar problem? Thanks in advance.

  Read the article

• How to port email from evolution to thunderbird?

  - by jim

  I updated ubuntu to 11.10 using the update notification. I am also switching from Xubuntu to ubuntu - gnome interface. I have been using evolution for years and would like to port the emails to thunderbird. I have looked at the similar questions with no luck and the thunderbird help on manually importing. Most of these assume that the evolution file structure is similar to the evolution file structure. When I set up thunderbird it seems to have imported the contacts from evolution (and actually removed them from evolution. However no mail got transferred. I found the evolution mail in ~/.local/share/evolution/mail/local . this has folders.db and 3 directories - cur ,tmp, and new. then there are the hidden files and directories. Each directory has three related files with extensions .cmeta, .ibex.index, and .ibex.index.data. Then all the directories had files that seem to contain the individual messages. I have not looked at rhyme or reason to the file numbering/naming scheme. is there a nice way to import these files?

  Read the article

• Cannot start tor with vidalia, failed to bind listening port because of tor-socks running

  - by ganjan

  I get these errors trying to run tor with vidalia Apr 19 21:55:15.371 [Notice] Tor v0.2.1.30. This is experimental software. Do not rely on it for strong anonymity. (Running on Linux i686) Apr 19 21:55:15.372 [Notice] Initialized libevent version 1.4.13-stable using method epoll. Good. Apr 19 21:55:15.373 [Notice] Opening Socks listener on 127.0.0.1:9050 Apr 19 21:55:15.373 [Warning] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? Apr 19 21:55:15.373 [Warning] Failed to parse/validate config: Failed to bind one of the listener ports. Apr 19 21:55:15.373 [Error] Reading config failed--see warnings above. I don't think tor is running. Here is a nmap scan of my localhost Starting Nmap 5.21 ( http://nmap.org ) at 2011-04-19 21:59 CEST Nmap scan report for localhost (127.0.0.1) Host is up (0.0000050s latency). Hostname localhost resolves to 2 IPs. Only scanned 127.0.0.1 rDNS record for 127.0.0.1: localhost.localdomain Not shown: 989 closed ports PORT STATE SERVICE 22/tcp open ssh 53/tcp open domain 80/tcp open http 139/tcp open netbios-ssn 445/tcp open microsoft-ds 631/tcp open ipp 3128/tcp open squid-http 3306/tcp open mysql 9000/tcp open cslistener 9050/tcp open tor-socks 10000/tcp open snet-sensor-mgmt I see tor-socks is running here, probably be the cause of the problem. How do I stop this from starting up? I want to use vidalia so I can monitor whats going on.

  Read the article

• Error while running Jetty Server on port 80 as non root user

  - by user75016

  All, I was trying to setup jetty on port 80 but its giving exception saying permission denied as below. I have setup jetty to work with setuid and configured start.ini as follows: OPTIONS=Server,jsp,jmx,resources,websocket,ext,plus,annotations,jta,jdbc,setuid (below as first configuration file in start.ini) etc/jetty-setuid.xml and jetty-setuid.xml file with username and group name of non root user. 2012-07-03 15:29:02.411:INFO:oejdp.ScanningAppProvider:Deployment monitor /opt/jetty-hightide-8.1.3.v20120416/contexts at interval 1 2012-07-03 15:29:02.454:WARN:oejuc.AbstractLifeCycle:FAILED [email protected]:80: java.net.SocketException: Permission denied java.net.SocketException: Permission denied at sun.nio.ch.Net.bind(Native Method) at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126) at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59) at org.eclipse.jetty.server.nio.SelectChannelConnector.open(SelectChannelConnector.java:182) at org.eclipse.jetty.server.AbstractConnector.doStart(AbstractConnector.java:311) at org.eclipse.jetty.server.nio.SelectChannelConnector.doStart(SelectChannelConnector.java:260) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:59) at org.eclipse.jetty.server.Server.doStart(Server.java:273) at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:59) at org.eclipse.jetty.xml.XmlConfiguration$1.run(XmlConfiguration.java:1215) at java.security.AccessController.doPrivileged(Native Method) at org.eclipse.jetty.xml.XmlConfiguration.main(XmlConfiguration.java:1138) 2012-07-03 15:29:02.455:WARN:oejuc.AbstractLifeCycle:FAILED org.eclipse.jetty.server.Server@66da9ea4: java.net.SocketException: Permission denied java.net.SocketException: Permission denied

  Read the article

• Sharing an internet connection through the Ethernet port

  - by Bob Cunningham

  I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

  Read the article

• port opengl2.x to opengl 3.x

  - by user46759

  I'm trying to port opencloth example to OpenGL 3.x. I've mostly done it to the shaders but I'm not sure of this part : glEnableClientState(GL_VERTEX_ARRAY); glBindBuffer(GL_ARRAY_BUFFER, vboID); glVertexPointer(4, GL_FLOAT, 0,0); glEnableClientState(GL_TEXTURE_COORD_ARRAY); glBindBuffer(GL_ARRAY_BUFFER, vboTexID); glTexCoordPointer(2, GL_FLOAT,0, 0); glEnableClientState(GL_NORMAL_ARRAY); glBindBuffer(GL_ARRAY_BUFFER, vboNormID); glNormalPointer(GL_FLOAT,sizeof(float)*4, 0); maybe glEnableVertexAttriArray somewhere ? any clue ? thanx edit : maybe something like that ? glEnableVertexAttribArray (2) ; // Ou glEnableVertexAttribArray (positionIndex) ; glBindBuffer(GL_ARRAY_BUFFER, vboTexID); glVertexAttribPointer (2, 2, GL_FLOAT, GL_FALSE, 0, 0) ; glEnableVertexAttribArray (3) ; // Ou glEnableVertexAttribArray (positionIndex) ; glBindBuffer(GL_ARRAY_BUFFER, vboNormID); glVertexAttribPointer (3, 4, GL_FLOAT, GL_FALSE, sizeof (float) * 4, 0) ;

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• Dealing with unwanted port numbers on localhost when debugging in Visual Studio

  - by Dan Bailiff

  So when I'm trying to debug a project in Visual Studio, I'll often have 1 or more services that I need to call. These services are separate projects and I'll launch them in separate instances of VS. ASP dev server kindly launches them with temporary port numbers attached. This would be fine except for my programs are looking for an IP without a port attached. (Typically it's as simple as "localhost"!) I've coped by using web config settings and changing the xml to use the port number while debugging. This still doesn't always work and occasionally I'll still have to fudge it and insert port numbers as strings in code! UGH! Then I have to remember to undo all the port herding code before deployment... I want to stop doing this: string _strBaseURL = String.Format("http://{0}:2277", ConfigurationManager.AppSettings["myservice_ip"].ToString()); What is the best practice here? Am I doomed to port herding while debugging VS apps?

  Read the article

• Did test server port change in Rails 2.3?

  - by kareem

  I upgraded rails to 2.3.2 from 2.1.1 yesterday and a bunch of my tests started failing. When I was running under 2.1.1, the test server was running on port 3000 so I had a HOST_DOMAIN variable that included the port - HOST_DOMAIN = "localhost.tst:3000". This is so my assert_redirected_to's would succeed. Now, however, it seems that the test server is running on port 80, so the port in HOST_DOMAIN is causing tests to fail. There's no specific reason I'm keeping the port in HOST_DOMAIN. I more want to know whether something in Rails 2.3 changed the port the test server runs on and where I can read more about why. I've searched a ton and can't find anything, so I'm going to my go-to place to ask development questions :) Thanks in advance.

  Read the article

• C, Linux: Receiving data from multiple multicast address on same port - how to distinguish them?

  - by Gigi

  2 vote down star I have an application that is receiving data from multiple multicast sources on the same port. I am able to receive the data. However, I am trying to account for statistics of each group (i.e. msgs received, bytes received) and all the data is getting mixed up. Does anyone know how to solved this problem? If I try to look at the sender's address, it is not the multicast address, but rather the IP of the sending machine. I am using the following socket options: struct ip_mreq mreq; mreq.imr_multiaddr.s_addr = inet_addr("224.1.2.3"); mreq.imr_interface.s_addr = INADDR_ANY; setsockopt(s, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); and also: setsockopt(s, SOL_SOCKET, SO_REUSEPORT, &reuse, sizeof(reuse)); I appreciate any help!!!

  Read the article

• How to rebind another UDP socket port properly?

  - by Jollian

  When my client application launchs, it binds the UDP port like this: this.BindPort(5001); The BindPort method implement blow: public void BindPort(int port) { m_listener = new Socket( AddressFamily.InterNetwork, SocketType.Dgram, ProtocolType.Udp ); IPEndPoint Point = new IPEndPoint( IPAddress.Any, Port ); m_listener.Bind( port); m_listener.BeginReceive( buff, 0, buff.Length, SocketFlags.None, new AsyncCallback( DataReceived ), buff ); } And when my server application commands client to bind to another UDP port(e.g. 5005). I call the same BindPort method in client. Then a exception occurs at DataReceived method. I think there must be a problem that I don't close the UDP port properly. But how can i close the UDP socket properly and rebind to another one. Thanks.

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >