Search Results

Search found 2488 results on 100 pages for 'virtualization portfolio'.

Page 29/100 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Network Bridging for WiFi-to-Ethernet in linux

  - by shakaran

  It is possible Network Bridging for WiFi-to-Ethernet in linux instead of Ethernet-to-Ethernet? I have a CentOS 6.3 machine. I am using KVM and I want perform a brigde for virtualize more machines. This machine is connected only via wireless connection and it doesn't have a ethernet connection. So, I did a bridge over the WiFi interface like: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE="br0" NM_CONTROLLED="yes" ONBOOT=yes TYPE=Bridge BOOTPROTO=none IPADDR=192.168.1.50 PREFIX=24 GATEWAY=192.168.1.1 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System br0" Then I edit my wireless conection like: # cat /etc/sysconfig/network-scripts/ifcfg-mywireless ESSID="mywireless" MODE=Managed KEY_MGMT=WPA-PSK WPA_ALLOW_WPA2=yes CIPHER_PAIRWISE=CCMP CIPHER_GROUP=CCMP TYPE=Wireless #BOOTPROTO=none #IPADDR=192.168.1.50 #PREFIX=24 #GATEWAY=192.168.1.1 #DNS1=8.8.8.8 #DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="Auto mywireless" UUID=874***** ONBOOT=yes LAST_CONNECT=1355923469 BRIDGE=br0 After, I restart the network: # /etc/init.d/network restart Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface Auto_mywireless: Error: Unknown connection: 874***** [FAILED] Bringing up interface br0: [ OK ] But as you can see, it show a error. My ifconfig output shows now: # ifconfig br0 Link encap:Ethernet HWaddr 6E:20:AD:CE:D8:AB inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6c20:adff:fece:d8ab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:6393 (6.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:432 errors:0 dropped:0 overruns:0 frame:0 TX packets:432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:62433 (60.9 KiB) TX bytes:62433 (60.9 KiB) ra0 Link encap:Ethernet HWaddr 00:22:F7:2B:87:E5 inet addr:192.168.1.42 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:f7ff:fe2b:87e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:46 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:487894880 (465.2 MiB) TX bytes:148136473 (141.2 MiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:5B:30:9A inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:70 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:5838 (5.7 KiB) But this doesn't give internet connection and I loss access to 192.168.1.50. So, it is possible setup this networking bridge WiFi-to-Ethernet?

  Read the article

• VMWare player - how do I start VM on machine with lower RAM? [closed]

  - by katit

  I moved image from one machine to another. Problem is - I didn't shut down' instance, just suspended it. On machine #1 I have 32G and instance had 16Gb allocated. On machine #2 I have only 10G and instance won't resume (due to memory) But I can't lower amount of memory - I guess because machine in "suspended". Anyway to lower memory or "shut down" instance without powering? How do I start it on machine #2?

  Read the article

• My HiperV Virtual Server stops with critical error.

  - by Svisstack

  Hello, I on microsoft hyper v create a server, i installing on it linux debian, but while instalation this server stopped with critical error and if I start it, he stops after approximaly 1 minute. How to debug it? Where i can find information about this critical error because in a events viewer I can't find any information about it.

  Read the article

• My HiperV Virtual Server stops with critical error.

  - by Svisstack

  Hello, I have problem with my HyperV virtual server, he minute after start was stopping with critical error. Where in the system i can find more information about this error?

  Read the article

• Sandboxie or VHD for virtual environment?

  - by lucian.jp

  I am looking for advices about creating virtual development environment. Is it better to have a base VHD file with differential VHD for stable development environment and another differential VHD file for beta development environment or should I install Sandboxie 64-bit and install both environment in different sandbox? I am concern about windows services and shortcuts with the sandbox. Current OS : Windows 7 64-bit

  Read the article

• What is a good OS to mess around with Xen Dom0?

  - by earlz

  Hello, I'd like to experiment some with Xen. My problem is I do not know which OS to try to install it with. I use OpenBSD, but it can not run as Dom0 or DomU at this point. I use Arch Linux on my website's VPS, so I know it and like it. The support for Xen just doesn't seem to be there though. Can anyone suggest a nice (preferably lightweight, so not SUSE and such) Linux distro or *BSD to mess around with Xen in a non-production environment?

  Read the article

• Using a boot to vhd file as a virtual machine

  - by qntmfred

  I have two boot to vhd files, one for win2k8 and one for win7 ultimate. If I boot into the win2k8, can I start the win7 vhd as a virtual machine using the windows server 2008 hyper-v tools?

  Read the article

• Improving IO with FlashCache

  - by Devator

  I have a server with 2 HDD's (2x 1 TB), running in RAID 1 (SW-RAID). I want to improve IO performance by using flashcache. There are running KVM virtual machines on it, using LVM. Regarding this, I have the following questions: Will this even work? flashcache works for block devices, however these are all virtual machines with their own setup. How much would I expect to increase performance? Most virtual machines run websites and some host games. How big does the SSD needs to be? Would having a bigger SSD increase performance since it's able to cache more files? What happens if the SSD dies? Would flashcache retrieve files from the traditional HDD and I could simply replace the SSD? How much faster would writeback be in comparison with writethrough and writearound? I have no access to a test system unfortunately, so could I install flashcache on a live server without unmounting the the disks? I found a great tutorial here which I would be using.

  Read the article

• Choosing between cloud (Cloudfoundry ) and virtual servers - for developers

  - by Mike Z

  I just came across some articles on how to setup your own cloud using Cloudfoundry and Ubuntu, this got me thinking, choosing our infrastructure, if we want to use our own servers what's the advantage of cloud on virtual servers vs just using virtual servers, VPN? If we now develop for the cloud later if we need help we can quickly move on to a cloud provider, but other than that what's the advantage and disadvantage of private cloud in these areas? speed of development, testing, deployment server management security having an extra layer (cloud) will that have a hit on server performance, how big? any other advantage/disadvantage?

  Read the article

• Hypervisor load on local disks

  - by Chris

  Hi, What is the I/O load on the local disk system for the host OS in XenServer ? I can't find this info anywhere. As we have a SAN for the VMs themselves, can we get away with cheap controller / SATA disk in raid-1 for the hypervisor ? We won't boot from the SAN as it seems prone to problems. Thanks, Chris

  Read the article

• How can I run the same Linux Installation on my hardware and in a virtual machine?

  - by LithMaster

  I've started some development that requires Linux (I'm currently on Ubuntu, but I may switch to Debian), but I still use Windows 7 for my day-to-day computing. I have already tried a dual-boot setup, but I've found that it is too cumbersome to switch between Linux and Windows. I'm wondering if it's possible to setup an installation of Linux (again, Ubuntu or Debian) on a partition of my hard drive that I can also run from Windows in a virtualized environment.

  Read the article

• How to Shrink large Hyper-V VM

  - by autrevo

  Using Disk2VHD utility I converted my bare-metal OS into Hyper-V VHD - http://technet.microsoft.com/en-us/sysinternals/ee656415.aspx And I could obtain a huge 190GB VHD file. Apart from performance issues, this VHD worked fine as guest when hosted on Windows Server 200 R2, Hyper-V. Having realized need to keeping only system files and application installations on VHD. I have deleted most of the junk data from this VHD and now it contains only 20-25 GB. But I am not able to shrink the VHD VM. Having done some research, I came to know, this as a limitation of .VHD files. Subsequently I followed these two step using Edit Virtual Hard Wizard on Windows 2012 Box. Convert from VHD to VHDX (took close to 3 hrs.) Compact (Another 4 hrs.) This did not ever shrink the VHDX either. Does Hyper-V does not provide proper support to handle large VHDs or VHDXs whose size are the range of 200GB.

  Read the article

• (simple) linux HA with vmware vsphere?

  - by derhelge

  I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

  Read the article

• Snapshot/rollback for libvirt+KVM?

  - by jtimberman

  I've recently begun using KVM for my development/test environment on a Linux host system with 8G memory. Prior, I was using VMware Fusion for my virtual environment, but my Macbook only has 2G memory. I tried VMware Server and ESX on the host instead of KVM, but the webUI doesn't run on Mac OSX's Firefox, and we're going to be doing more with KVM anyway. The main feature of VMware I miss is robust snapshot/rollback, but I'm missing this in KVM. I understand the snapshot command, but it shuts down the guest OS when complete, and then copying the disk image to preserve its state is cumbersome. Is this really the best way to manage snapshots on KVM?

  Read the article

• How compatible are VMWare and VirtualBox?

  - by MikeKusold

  At my workplace, everyone uses VMware Player (and some people have licenses for Workstation). We frequently share VMs to save time on development setup. However, I would really like to take advantage of the Snapshot feature in VirtualBox since I am unable to acquire a license for Workstation. I have read that VirtualBox has no issues reading VMWare VMs (including VMs with snapshots). However, I'm worried about how compatible things are the other way. In VirtualBox, I open up a VM created in VMware and create multiple snapshots. Can the resulting files be opened in VMware?

  Read the article

• Mac OS on a Windows PC

  I've done a little bit of reading on the topic, but nothing too clear has turned up. Why is it so difficult to run Mac OS on a virtual machine on a PC? Some sources say it's because of hardware architecture. Is there a clear, definitive reason?

  Read the article

• Feedback on Using ZFS and FreeBSD

  - by ToiletOverflow

  I need to create a server that will be used solely for backing up files. The server will have 2TB of storage to begin with but I may want to add additional storage later on. As such, I am currently considering using FreeBSD + ZFS as the OS and file system. Is ZFS a reliable, trusted file system? Should I use it in this scenario? I have read that ZFS should be used with OpenSolaris over FreeBSD as OpenSolaris is usually ahead of the curve with ZFS as far as version updates and stability. However, I am not interested in using OpenSolaris for this project. An alternative option that I am considering is to stick with ext3 and create multiple volumes if need be, because I know that I will not need a single, continuous volume larger than 2TB. Thanks in advance for your feedback.

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• Is there a good command-line OS from which I can launch VMs?

  - by Dredj

  Generally speaking, I'm interested in something that can load quickly and, depending on what I want to do, can choose to launch a Virtual Machine that is tailored to my desired activity. So, something that loads to (preferably) a command line, then if I want to run my Windows 7 machine that has all of my programming junk on it, I can simply enter the command to launch some VM player and close it when I'm done.

  Read the article

• Virtual Server 2005 VSS writer missing

  - by Jon S.

  I have two servers running Virtual server 2005 R2 SP1. I'm using Symantec Backup Exec 10d for backups. One server runs the backups fine but the other will cause the vm's to crash when it tries to backup. I think the problem is because the "Microsoft Vitual Server 2005 Writer" is not showing up when I run "vssadmin list writers". Can I install the writer without reinstalling VS 2005?

  Read the article

• Dell External SAS 5/E HBA and Hyper-V

  - by JohnyD

  I have a Dell R710 running Win2008 R2 + Hyper-V with dual SAS 5/E HBA's. I'm building a Linux VM to install Bacula on and I need to connect it to my Dell PowerVault 124T via the SAS HBA. I've been doing some looking online and I have yet to find a straightforward answer on how to connect a SAS HBA to a VM, let alone a Linux VM. The flavor is Ubuntu 32-bit.

  Read the article

• Bare-metal virtualisation for the desktop

  - by Andrew Taylor

  Hi, Does anyone have any knowledge about bare-metal virtualisation products? I'm interested in building a new desktop machine for home, I've been looking at the Intel Quad Core processors and I'd like to put 8GB of RAM in there, but, it got me thinking about making the most out of the available resources. I thought if I could get a good 64bit machine, put some bare-metal virtualisation on, then have a primary system, I'd also be able to bring up some extra virtualised systems as and when I needed. I know most of the bare metal systems are designed for the server market, but, is there anything out there that works well for a desktop. What are the caveats? I presume I won't be able to make the most out of any video cards I could buy, what about just getting a decent screen resolution, will this be a problem? I run a single 24" screen. What about DVD/CD writing, is this possible? I'd like to re-rip my CD collection, I was hoping the quad 64Bit goodness would help me out with the encoding. I currently use a Mac and couldn't go back to windows so that leaves Linux, I was thinking a primary OS of ubuntu. Does this make a difference? Thanks Andrew

  Read the article

• My HiperV Server stops with critical error.

  - by Svisstack

  Hello, I have problem with my HyperV server, he minute after start was stopping with critical error. Where in the system i can find more information about this error?

  Read the article

• Make cloudera-vm work on Oracle VM VirtualBox

  - by ????? ????????

  I downloaded this and the instructions say: Important: You must enable the I/O APIC in order to use 64-bit mode. (See http://www.virtualbox.org/manual/ch03.html.) On newer versions of VirtualBox, it may default to using SATA as the disk interface. This can cause a kernel panic in the VM. Switching to the IDE driver solves this problem. I am running this on Red Hat 64-bit mode (I've also tried on Ubuntu 64-bit with the same result). I pointed to the cloudera-vm image as a startup disk for the VM. I am getting this message: Failed to open a session for the virtual machine ClouderaDevelopment. VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} Does anyone know what I am doing wrong?

  Read the article

• Running virtual machines: Linux vs Windows 7

  - by vikp

  Hi, I have tried running windows xp development virtual machine under windows 7 and the performance was dreadful. I'm considering installing Linux and running the virtual machine from the Linux, but I'm not sure whether I can expect any performance gains? It's a 2.4ghz core 2 duo machine with 4gb ram and 5400 rpm hdd. Can somebody please recommend very cut down version of linux that can run VMWare player and isn't resource hungry? Thank you

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >