label statements - Page 290

What's New In 11.1.2.1 (Talleyrand SP1)

- by russ.bishop

This release is primarily about bug fixes and that's what we spent the most time on, but we also addressed a number of other things: 1. Performance improvements We've done a lot of work to improve the performance of page load and execution times. For example, the View Compare page is about half the size it was previously! We've also done a lot of work on the server to improve performance of queries, exports, action scripts, etc. We implemented some finer-grained locking so fewer operations will block other users while they are in progress. We made some optimizations to improve performance when you have a lot of network or database latency as well. Just a few examples: An Import that previously took 8 GB of memory and hours to complete now runs in about 30 minutes and never takes more than 1 GB of RAM. Searching by exact Node Name now completes within 2 seconds even for a hierarchy with millions of nodes. Another search that was taking 30 seconds to run now completes in less than 5 seconds. 2. Upgrade support This release supports automatic upgrade from previous releases, built right into the console. 3. Console Improvements The Console has been reorganized and made easier to use. It is also much more multi-threaded so it responds quicker without freezing up when you save changes or when it needs to get status. 4. Property Namespaces Properties now have a concept called a Namespace. This is tied into the Application Templates to prevent conflicts with duplicate property names. Right now, if you have an AccountType and you pull in the HFM template, it also has AccountType so you end up creating properties with decorations on the name like "Account Type (HFM)". This is no longer necessary. In addition, properties within a namespace must have unique labels but they can be duplicated across namespaces. So in the Property Grid when you click on the HFM category, you just see "AccountType". When you click on MyCategory, you see "AccountType", but they are different properties with different values. Within formulas, the names are still unique (eg: Custom.AccountType vs HFM.AccountType). I'll write more about this one later. 5. Single Sign On DRM now supports Single Sign-On via HSS. For example, if you are using Oracle's OAM as your SSO solution then you configure HSS to use OAM just like you would before. You also configure DRM to use HSS, again just like before. Then you configure OAM to protect the DRM web app, like you would any other website. However once you do those things, users are no longer prompted to enter their username/password. They simply get redirected to OAM if they don't already have a login token, otherwise they pick their application and sail right into DRM. You can also avoid having to pick an application (see the next item) 6. URL-based navigation You can now specify the application you want to log into via the URL. Combined with SSO and your Intranet, it becomes easy to provide links on our intranet portal that take users directly into a specific DRM application. We also support specifying the Version, Hierarchy, and Node. Again, this can be used on your internal portal, but the scenarios get even more interesting when you are using workflow like Oracle BPEL you can automatically generate links within emails that will take users directly to a specific node in the UI. 7. Job status and cancellation A lot of the jobs now report their status and support true cancellation. Action Scripts also report a progress complete percentage since the amount of work is known ahead of time. 8. Action Script Options Action scripts support Option declarations at the top of the file so a script can self-describe (when specified in the file, the corresponding item in the file is ignored). For example: Option|DetectDelimiter Option|UsePropertyNames|true This will tell DRM to automatically detect the delimiter (a pipe symbol in this case) and that all references to properties are by Name, not by Label. Note that when you load a script in the UI, if you use Labels we automatically try to match them up if they are unique. Any duplicates are indicated and you are presented with a choice to pick which property you actually referred to. This is somewhat similar to Version substitution, but tailored for properties. There are other more minor changes and like I said earlier a lot of bug fixes and performance improvements. Hopefully I will get a chance to dig into some of these things in future blog posts.

Read the article

Configuration "diff" across Oracle WebCenter Sites instances

- by Mark Fincham-Oracle

Problem Statement With many Oracle WebCenter Sites environments - how do you know if the various configuration assets and settings are in sync across all of those environments? Background At Oracle we typically have a "W" shaped set of environments. For the "Production" environments we typically have a disaster recovery clone as well and sometimes additional QA environments alongside the production management environment. In the case of www.java.com we have 10 different environments. All configuration assets/settings (CSElements, Templates, Start Menus etc..) start life on the Development Management environment and are then published downstream to other environments as part of the software development lifecycle. Ensuring that each of these 10 environments has the same set of Templates, CSElements, StartMenus, TreeTabs etc.. is impossible to do efficiently without automation. Solution Summary The solution comprises of two components. A JSON data feed from each environment. A simple HTML page that consumes these JSON data feeds. Data Feed: Create a JSON WebService on each environment. The WebService is no more than a SiteEntry + CSElement. The CSElement queries various DB tables to obtain details of the assets/settings returning this data in a JSON feed. Report: Create a simple HTML page that uses JQuery to fetch the JSON feed from each environment and display the results in a table. Since all assets (CSElements, Templates etc..) are published between environments they will have the same last modified date. If the last modified date of an asset is different in the JSON feed or is mising from an environment entirely then highlight that in the report table. Example Solution Details Step 1: Create a Site Entry + CSElement that outputs JSON Site Entry & CSElement Setup The SiteEntry should be uncached so that the most recent configuration information is returned at all times. In the CSElement set the contenttype accordingly: Step 2: Write the CSElement Logic The basic logic, that we repeat for each asset or setting that we are interested in, is to query the DB using <ics:sql> and then loop over the resultset with <ics:listloop>. For example: <ics:sql sql="SELECT name,updateddate FROM Template WHERE status != 'VO'" listname="TemplateList" table="Template" /> "templates": [ <ics:listloop listname="TemplateList"> {"name":"<ics:listget listname="TemplateList" fieldname="name"/>", "modified":"<ics:listget listname="TemplateList" fieldname="updateddate"/>"}, </ics:listloop> ], A comprehensive list of SQL queries to fetch each configuration asset/settings can be seen in the appendix at the end of this article. For the generation of the JSON data structure you could use Jettison (the library ships with the 11.1.1.8 version of the product), native Java 7 capabilities or (as the above example demonstrates) you could roll-your-own JSON output but that is not advised. Step 3: Create an HTML Report The JavaScript logic looks something like this.. 1) Create a list of JSON feeds to fetch: ENVS['dev-mgmngt'] = 'http://dev-mngmnt.example.com/sites/ContentServer?d=&pagename=settings.json'; ENVS['dev-dlvry'] = 'http://dev-dlvry.example.com/sites/ContentServer?d=&pagename=settings.json'; ENVS['test-mngmnt'] = 'http://test-mngmnt.example.com/sites/ContentServer?d=&pagename=settings.json'; ENVS['test-dlvry'] = 'http://test-dlvry.example.com/sites/ContentServer?d=&pagename=settings.json'; 2) Create a function to get the JSON feeds: function getDataForEnvironment(url){ return $.ajax({ type: 'GET', url: url, dataType: 'jsonp', beforeSend: function (jqXHR, settings){ jqXHR.originalEnv = env; jqXHR.originalUrl = url; }, success: function(json, status, jqXHR) { console.log('....success fetching: ' + jqXHR.originalUrl); // store the returned data in ALLDATA ALLDATA[jqXHR.originalEnv] = json; }, error: function(jqXHR, status, e) { console.log('....ERROR: Failed to get data from [' + url + '] ' + status + ' ' + e); } }); } 3) Fetch each JSON feed: for (var env in ENVS) { console.log('Fetching data for env [' + env +'].'); var promisedData = getDataForEnvironment(ENVS[env]); promisedData.success(function (data) {}); } 4) For each configuration asset or setting create a table in the report For example, CSElements: 1) Get a list of unique CSElement names from all of the returned JSON data. 2) For each unique CSElement name, create a row in the table 3) Select 1 environment to represent the master or ideal state (e.g. "Everything should be like Production Delivery") 4) For each environment, compare the last modified date of this envs CSElement to the master. Highlight any differences in last modified date or missing CSElements. 5) Repeat... Appendix This section contains various SQL statements that can be used to retrieve configuration settings from the DB. Templates <ics:sql sql="SELECT name,updateddate FROM Template WHERE status != 'VO'" listname="TemplateList" table="Template" /> CSElements <ics:sql sql="SELECT name,updateddate FROM CSElement WHERE status != 'VO'" listname="CSEList" table="CSElement" /> Start Menus <ics:sql sql="select sm.id, sm.cs_name, sm.cs_description, sm.cs_assettype, sm.cs_assetsubtype, sm.cs_itemtype, smr.cs_rolename, p.name from StartMenu sm, StartMenu_Sites sms, StartMenu_Roles smr, Publication p where sm.id=sms.ownerid and sm.id=smr.cs_ownerid and sms.pubid=p.id order by sm.id" listname="startList" table="Publication,StartMenu,StartMenu_Roles,StartMenu_Sites"/> Publishing Configurations <ics:sql sql="select id, name, description, type, dest, factors from PubTarget" listname="pubTargetList" table="PubTarget" /> Tree Tabs <ics:sql sql="select tt.id, tt.title, tt.tooltip, p.name as pubname, ttr.cs_rolename, ttsect.name as sectname from TreeTabs tt, TreeTabs_Roles ttr, TreeTabs_Sect ttsect,TreeTabs_Sites ttsites LEFT JOIN Publication p on p.id=ttsites.pubid where p.id is not null and tt.id=ttsites.ownerid and ttsites.pubid=p.id and tt.id=ttr.cs_ownerid and tt.id=ttsect.ownerid order by tt.id" listname="treeTabList" table="TreeTabs,TreeTabs_Roles,TreeTabs_Sect,TreeTabs_Sites,Publication" /> Filters <ics:sql sql="select name,description,classname from Filters" listname="filtersList" table="Filters" /> Attribute Types <ics:sql sql="select id,valuetype,name,updateddate from AttrTypes where status != 'VO'" listname="AttrList" table="AttrTypes" /> WebReference Patterns <ics:sql sql="select id,webroot,pattern,assettype,name,params,publication from WebReferencesPatterns" listname="WebRefList" table="WebReferencesPatterns" /> Device Groups <ics:sql sql="select id,devicegroupsuffix,updateddate,name from DeviceGroup" listname="DeviceList" table="DeviceGroup" /> Site Entries <ics:sql sql="select se.id,se.name,se.pagename,se.cselement_id,se.updateddate,cse.rootelement from SiteEntry se LEFT JOIN CSElement cse on cse.id = se.cselement_id where se.status != 'VO'" listname="SiteList" table="SiteEntry,CSElement" /> Webroots <ics:sql sql="select id,name,rooturl,updatedby,updateddate from WebRoot" listname="webrootList" table="WebRoot" /> Page Definitions <ics:sql sql="select pd.id, pd.name, pd.updatedby, pd.updateddate, pd.description, pdt.attributeid, pa.name as nameattr, pdt.requiredflag, pdt.ordinal from PageDefinition pd, PageDefinition_TAttr pdt, PageAttribute pa where pd.status != 'VO' and pa.id=pdt.attributeid and pdt.ownerid=pd.id order by pd.id,pdt.ordinal" listname="pageDefList" table="PageDefinition,PageAttribute,PageDefinition_TAttr" /> FW_Application <ics:sql sql="select id,name,updateddate from FW_Application where status != 'VO'" listname="FWList" table="FW_Application" /> Custom Elements <ics:sql sql="select elementname from ElementCatalog where elementname like 'CustomElements%'" listname="elementList" table="ElementCatalog" />

Read the article

Das T5-4 TPC-H Ergebnis naeher betrachtet

- by Stefan Hinker

Inzwischen haben vermutlich viele das neue TPC-H Ergebnis der SPARC T5-4 gesehen, das am 7. Juni bei der TPC eingereicht wurde. Die wesentlichen Punkte dieses Benchmarks wurden wie gewohnt bereits von unserer Benchmark-Truppe auf "BestPerf" zusammengefasst. Es gibt aber noch einiges mehr, das eine naehere Betrachtung lohnt. Skalierbarkeit Das TPC raet von einem Vergleich von TPC-H Ergebnissen in unterschiedlichen Groessenklassen ab. Aber auch innerhalb der 3000GB-Klasse ist es interessant: SPARC T4-4 mit 4 CPUs (32 Cores mit 3.0 GHz) liefert 205,792 QphH. SPARC T5-4 mit 4 CPUs (64 Cores mit 3.6 GHz) liefert 409,721 QphH. Das heisst, es fehlen lediglich 1863 QphH oder 0.45% zu 100% Skalierbarkeit, wenn man davon ausgeht, dass die doppelte Anzahl Kerne das doppelte Ergebnis liefern sollte. Etwas anspruchsvoller, koennte man natuerlich auch einen Faktor von 2.4 erwarten, wenn man die hoehere Taktrate mit beruecksichtigt. Das wuerde die Latte auf 493901 QphH legen. Dann waere die SPARC T5-4 bei 83%. Damit stellt sich die Frage: Was hat hier nicht skaliert? Vermutlich der Plattenspeicher! Auch hier lohnt sich eine naehere Betrachtung: Plattenspeicher Im Bericht auf BestPerf und auch im Full Disclosure Report der TPC stehen einige interessante Details zum Plattenspeicher und der Konfiguration. In der Konfiguration der SPARC T4-4 wurden 12 2540-M2 Arrays verwendet, die jeweils ca. 1.5 GB/s Durchsatz liefert, insgesamt also eta 18 GB/s. Dabei waren die Arrays offensichtlich mit jeweils 2 Kabeln pro Array direkt an die 24 8GBit FC-Ports des Servers angeschlossen. Mit den 2x 8GBit Ports pro Array koennte man so ein theoretisches Maximum von 2GB/s erreichen. Tatsaechlich wurden 1.5GB/s geliefert, was so ziemlich dem realistischen Maximum entsprechen duerfte. Fuer den Lauf mit der SPARC T5-4 wurden doppelt so viele Platten verwendet. Dafuer wurden die 2540-M2 Arrays mit je einem zusaetzlichen Plattentray erweitert. Mit dieser Konfiguration wurde dann (laut BestPerf) ein Maximaldurchsatz von 33 GB/s erreicht - nicht ganz das doppelte des SPARC T4-4 Laufs. Um tatsaechlich den doppelten Durchsatz (36 GB/s) zu liefern, haette jedes der 12 Arrays 3 GB/s ueber seine 4 8GBit Ports liefern muessen. Im FDR stehen nur 12 dual-port FC HBAs, was die Verwendung der Brocade FC Switches erklaert: Es wurden alle 4 8GBit ports jedes Arrays an die Switches angeschlossen, die die Datenstroeme dann in die 24 16GBit HBA ports des Servers buendelten. Das theoretische Maximum jedes Storage-Arrays waere nun 4 GB/s. Wenn man jedoch den Protokoll- und "Realitaets"-Overhead mit einrechnet, sind die tatsaechlich gelieferten 2.75 GB/s gar nicht schlecht. Mit diesen Zahlen im Hinterkopf ist die Verdopplung des SPARC T4-4 Ergebnisses eine gute Leistung - und gleichzeitig eine gute Erklaerung, warum nicht bis zum 2.4-fachen skaliert wurde. Nebenbei bemerkt: Weder die SPARC T4-4 noch die SPARC T5-4 hatten in der gemessenen Konfiguration irgendwelche Flash-Devices. Mitbewerb Seit die T4 Systeme auf dem Markt sind, bemuehen sich unsere Mitbewerber redlich darum, ueberall den Eindruck zu hinterlassen, die Leistung des SPARC CPU-Kerns waere weiterhin mangelhaft. Auch scheinen sie ueberzeugt zu sein, dass (ueber)grosse Caches und hohe Taktraten die einzigen Schluessel zu echter Server Performance seien. Wenn ich mir nun jedoch die oeffentlichen TPC-H Ergebnisse ansehe, sehe ich dies: TPC-H @3000GB, Non-Clustered Systems System QphH SPARC T5-4 3.6 GHz SPARC T5 4/64 – 2048 GB 409,721.8 SPARC T4-4 3.0 GHz SPARC T4 4/32 – 1024 GB 205,792.0 IBM Power 780 4.1 GHz POWER7 8/32 – 1024 GB 192,001.1 HP ProLiant DL980 G7 2.27 GHz Intel Xeon X7560 8/64 – 512 GB 162,601.7 Kurz zusammengefasst: Mit 32 Kernen (mit 3 GHz und 4MB L3 Cache), liefert die SPARC T4-4 mehr QphH@3000GB ab als IBM mit ihrer 32 Kern Power7 (bei 4.1 GHz und 32MB L3 Cache) und auch mehr als HP mit einem 64 Kern Intel Xeon System (2.27 GHz und 24MB L3 Cache). Ich frage mich, wo genau SPARC hier mangelhaft ist? Nun koennte man natuerlich argumentieren, dass beide Ergebnisse nicht gerade neu sind. Nun, in Ermangelung neuerer Ergebnisse kann man ja mal ein wenig spekulieren: IBMs aktueller Performance Report listet die o.g. IBM Power 780 mit einem rPerf Wert von 425.5. Ein passendes Nachfolgesystem mit Power7+ CPUs waere die Power 780+ mit 64 Kernen, verfuegbar mit 3.72 GHz. Sie wird mit einem rPerf Wert von 690.1 angegeben, also 1.62x mehr. Wenn man also annimmt, dass Plattenspeicher nicht der limitierende Faktor ist (IBM hat mit 177 SSDs getestet, sie duerfen das gerne auf 400 erhoehen) und IBMs eigene Leistungsabschaetzung zugrunde legt, darf man ein theoretisches Ergebnis von 311398 QphH@3000GB erwarten. Das waere dann allerdings immer noch weit von dem Ergebnis der SPARC T5-4 entfernt, und gerade in der von IBM so geschaetzen "per core" Metric noch weniger vorteilhaft. In der x86-Welt sieht es nicht besser aus. Leider gibt es von Intel keine so praktischen rPerf-Tabellen. Daher muss ich hier fuer eine Schaetzung auf SPECint_rate2006 zurueckgreifen. (Ich bin kein grosser Fan von solchen Kreuz- und Querschaetzungen. Insb. SPECcpu ist nicht besonders geeignet, um Datenbank-Leistung abzuschaetzen, da fast kein IO im Spiel ist.) Das o.g. HP System wird bei SPEC mit 1580 CINT2006_rate gelistet. Das bis einschl. 2013-06-14 beste Resultat fuer den neuen Intel Xeon E7-4870 mit 8 CPUs ist 2180 CINT2006_rate. Das ist immerhin 1.38x besser. (Wenn man nur die Taktrate beruecksichtigen wuerde, waere man bei 1.32x.) Hier weiter zu rechnen, ist muessig, aber fuer die ungeduldigen Leser hier eine kleine tabellarische Zusammenfassung: TPC-H @3000GB Performance Spekulationen System QphH* Verbesserung gegenueber der frueheren Generation SPARC T4-4 32 cores SPARC T4 205,792 2x SPARC T5-464 cores SPARC T5 409,721 IBM Power 780 32 cores Power7 192,001 1.62x IBM Power 780+ 64 cores Power7+ 311,398* HP ProLiant DL980 G764 cores Intel Xeon X7560 162,601 1.38x HP ProLiant DL980 G780 cores Intel Xeon E7-4870 224,348* * Keine echten Resultate - spekulative Werte auf der Grundlage von rPerf (Power7+) oder SPECint_rate2006 (HP) Natuerlich sind IBM oder HP herzlich eingeladen, diese Werte zu widerlegen. Aber stand heute warte ich noch auf aktuelle Benchmark Veroffentlichungen in diesem Datensegment. Was koennen wir also zusammenfassen? Es gibt einige Hinweise, dass der Plattenspeicher der begrenzende Faktor war, der die SPARC T5-4 daran hinderte, auf jenseits von 2x zu skalieren Der Mythos, dass SPARC Kerne keine Leistung bringen, ist genau das - ein Mythos. Wie sieht es umgekehrt eigentlich mit einem TPC-H Ergebnis fuer die Power7+ aus? Cache ist nicht der magische Performance-Schalter, fuer den ihn manche Leute offenbar halten. Ein System, eine CPU-Architektur und ein Betriebsystem jenseits einer gewissen Grenze zu skalieren ist schwer. In der x86-Welt scheint es noch ein wenig schwerer zu sein. Was fehlt? Nun, das Thema Preis/Leistung ueberlasse ich gerne den Verkaeufern ;-) Und zu guter Letzt: Nein, ich habe mich nicht ins Marketing versetzen lassen. Aber manchmal kann ich mich einfach nicht zurueckhalten... Disclosure Statements The views expressed on this blog are my own and do not necessarily reflect the views of Oracle. TPC-H, QphH, $/QphH are trademarks of Transaction Processing Performance Council (TPC). For more information, see www.tpc.org, results as of 6/7/13. Prices are in USD. SPARC T5-4 409,721.8 QphH@3000GB, $3.94/QphH@3000GB, available 9/24/13, 4 processors, 64 cores, 512 threads; SPARC T4-4 205,792.0 QphH@3000GB, $4.10/QphH@3000GB, available 5/31/12, 4 processors, 32 cores, 256 threads; IBM Power 780 QphH@3000GB, 192,001.1 QphH@3000GB, $6.37/QphH@3000GB, available 11/30/11, 8 processors, 32 cores, 128 threads; HP ProLiant DL980 G7 162,601.7 QphH@3000GB, $2.68/QphH@3000GB available 10/13/10, 8 processors, 64 cores, 128 threads. SPEC and the benchmark names SPECfp and SPECint are registered trademarks of the Standard Performance Evaluation Corporation. Results as of June 18, 2013 from www.spec.org. HP ProLiant DL980 G7 (2.27 GHz, Intel Xeon X7560): 1580 SPECint_rate2006; HP ProLiant DL980 G7 (2.4 GHz, Intel Xeon E7-4870): 2180 SPECint_rate2006,

Read the article

Rapid Evolution of Society & Technology

- by Michael Snow

We caught up with Brian Solis on the phone the other day and Christie Flanagan had a chance to chat with him and learn a bit more about him and some of the concepts he'll be addressing in our Social Business Thought Leaders Webcast on Thursday 12/13/12. «--- Interview with Brian Solis Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast- mso-fareast-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Be sure and register for this week's webcast ---» ------------------- Guest post by Brian Solis. Reposted (Borrowed) from his posting of May 24, 2012 Dear [insert business name], what’s your promise? - Brian Solis You say you want to get closer to customers, but your actions are different than your words. You say you want to “surprise and delight” customers, but your product development teams are too busy building against a roadmap without consideration of the 5th P of marketing…people. Your employees are your number one asset, however the infrastructure of the organization has turned once optimistic and ambitious intrapreneurs into complacent cogs or worse, your greatest detractors. You question the adoption of disruptive technology by your internal champions yet you’ve not tried to find the value for yourself. You’re a change agent and you truly wish to bring about change, but you’ve not invested time or resources to answer “why” in your endeavors to become a connected or social business. If we are to truly change, we must find purpose. We must uncover the essence of our business and the value it delivers to traditional and connected consumers. We must rethink the spirit of today’s embrace and clearly articulate how transformation is going to improve customer and employee experiences and relationships now and over time. Without doing so, any attempts at evolution will be thwarted by reality. In an era of Digital Darwinism, no business is too big to fail or too small to succeed. These are undisciplined times which require alternative approaches to recognize and pursue new opportunities. But everything begins with acknowledging the 360 view of the world that you see today is actually a filtered view of managed and efficient convenience. Today, many organizations that were once inspired by innovation and engagement have fallen into a process of marketing, operationalizing, managing, and optimizing. That might have worked for the better part of the last century, but for the next 10 years and beyond, new vision, leadership and supporting business models will be written to move businesses from rigid frameworks to adaptive and agile entities. I believe that today’s executives will undergo a great test; a test of character, vision, intention, and universal leadership. It starts with a simple, but essential question…what is your promise? Notice, I didn’t ask about your brand promise. Nor did I ask for you to cite your mission and vision statements. This is much more than value propositions or manufactured marketing language designed to hook audiences and stakeholders. I asked for your promise to me as your consumer, stakeholder, and partner. This isn’t about B2B or B2C, but instead, people to people, person to person. It is this promise that will breathe new life into an organization that on the outside, could be misdiagnosed as catatonic by those who are disrupting your markets. A promise, for example, is meant to inspire. It creates alignment. It serves as the foundation for your vision, mission, and all business strategies and it must come from the top to mean anything. For without it, we cannot genuinely voice what it is we stand for or stand behind. Think for a moment about the definition of community. It’s easy to confuse a workplace or a market where everyone simply shares common characteristics. However, a community in this day and age is much more than belonging to something, it’s about doing something together that makes belonging matter The next few years will force a divide where companies are separated by intention as measured by actions and words. But, becoming a social business is not enough. Becoming more authentic and transparent doesn’t serve as a mantra for a renaissance. A promise is the ink that inscribes the spirit of the relationship between you and me. A promise serves as the words that influence change from within and change beyond the halls of our business. It is the foundation for a renewed embrace, one that must then find its way to every aspect of the organization. It’s the difference between a social business and an adaptive business. While an adaptive business can also be social, it is the culture of the organization that strives to not just use technology to extend current philosophies or processes into new domains, but instead give rise to a new culture where striving for relevance is among its goals. The tools and networks simply become enablers of a greater mission You are reading this because you believe in something more than what you’re doing today. While you fight for change within your organization, remember to aim for a higher purpose. Organizations that strive for innovation, imagination, and relevance will outperform those that do not. Part of your job is to lead a missionary push that unites the groundswell with a top down cascade. Change will only happen because you and other internal champions see what others can’t and will do what other won’t. It takes resolve. It takes the ability to translate new opportunities into business value. And, it takes courage. “This is a very noisy world, so we have to be very clear what we want them to know about us”-Steve Jobs ----------------------------------------------------------------- So -- where do you begin to evaluate the kind of experience you are delivering for your customers, partners, and employees? Take a look at this White Paper: Creating a Successful and Meaningful Customer Experience on the Web and then have a cup of coffee while you listen to the sage advice of Guy Kawasaki in a short video below. An interview with Guy Kawasaki on Maximizing Social Media Channels

Read the article

Oracle Applications Day 2012. Experience the Global Innovation of Management Applications

- by antonella.buonagurio

1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 1024x768 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 10 ottobre 2012 – Milano, East End Studios | 17 ottobre 2012 - Roma, Officine Farneto Partecipa all’appuntamento dedicato alla comunità di Clienti e Partner per fare networking e condividere le esperienze sulle soluzioni più innovative per affrontare le sfide attuali e future. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A Milano (10/10/2012) interverranno, tra gli altri: Enrico Ancona, Amministratore Delegato - Imperia & Monferrina e Business Reply Massimiliano Gerli, CIO - Amplifon e Michele Paolin, Senior Manager - Deloitte eXtended Business Services A Roma (17/10/2012) interverranno, tra gli altri: Giulio Carone, CFO - Enel Green Power e Claudio Arcudi, Senior Executive - Accenture Gianluca D’Aniello, CIO - Sky e Giorgio Pitruzzello, Manager - Deloitte Consulting Spartaco Parente, EPD Change & Label Control - Abbott e Business Reply Sono inoltre previsti i contributi delle aziende Abbott, Aeroporto di Napoli, Amplifon, Dema Aerospace, Enel Green Power, Fiera Milano, Imperia & Monferrina, La Rinascente, Safilo, Sky, Spal,Technogym, Tiscali e Tivù che parleranno di: Innovation for Human Resources Performance Management Excellence Empower Applications with Technology (Milano) Applications for Public Sector (Roma) Next Generation Global Operations Customer Experience Revolution Oltre dieci Instant Workshop ti permetteranno di conoscere e condividere l’esperienza dei Partner e delle aziende che utilizzano le soluzioni Oracle.In più, oltre dieci Instant Workshop per conoscere e condividere l’esperienza dei Partner e delle aziende che utilizzano con successo le soluzioni Oracle. Iscriviti sul sito Partecipa al concorso fotografico Oracle I.M.A.G.E. e vinci il tuo iPad! Scatta le immagini che per te descrivono i cinque concept dell’evento (Innovation, Management, Applications, Global, Experience) e inviale per e-mail. Per iscriverti al contest visita la pagina Concorso sul sito Non perdere l’evento più “social cool” dell’anno!

Read the article

Christmas in the Clouds

- by andrewbrust

I have been spending the last 2 weeks immersing myself in a number of Windows Azure and SQL Azure technologies. And in setting up a new business (I’ll speak more about that in the future), I have also become a customer of Microsoft’s BPOS (Business Productivity Online Services). In short, it has been a fortnight of Microsoft cloud computing. On the Azure side, I’ve looked, of course, at Web Roles and Worker Roles. But I’ve also looked at Azure Storage’s REST API (including coding to it directly), I’ve looked at Azure Drive and the new VM Role; I’ve looked quite a bit at SQL Azure (including the project “Houston” Silverlight UI) and I’ve looked at SQL Azure labs’ OData service too. I’ve also looked at DataMarket and its integration with both PowerPivot and native Excel. Then there’s AppFabric Caching, SQL Azure Reporting (what I could learn of it) and the Visual Studio tooling for Azure, including the storage of certificate-based credentials. And to round it out with some user stuff, on the BPOS side, I’ve been working with Exchange Online, SharePoint Online and LiveMeeting. I have to say I like a lot of what I’ve been seeing. Azure’s not perfect, and BPOS certainly isn’t either. But there’s good stuff in all these products, and there’s a lot of value. Azure Goes Deep Most people know that Web and Worker roles put the platform in charge of spinning virtual machines up and down, and keeping them up to date. But you can go way beyond that now. The still-in-beta VM Role gives you the power to craft the machine (much as does Amazon’s EC2), though it takes away the platform’s self-managing attributes. It still spins instances up and down, making drive storage non-durable, but Azure Drive gives you the ability to store VHD files as blobs and mount them as virtual hard drives that are readable and writeable. Whether with Azure Storage or SQL Azure, Azure does data. And OData is everywhere. Azure Table Storage supports an OData Interface. So does SQL Azure and so does DataMarket (the former project “Dallas”). That means that Azure data repositories aren’t just straightforward to provision and configure…they’re also easy to program against, from just about any programming environment, in a RESTful manner. And for more .NET-centric implementations, Azure AppFabric caching takes the technology formerly known as “Velocity” and throws it up into the cloud, speeding data access even more. Snapping in Place Once you get the hang of it, this stuff just starts to work in a way that becomes natural to understand. I wasn’t expecting that, and I was really happy to discover it. In retrospect, I am not surprised, because I think the various Azure teams are the center of gravity for Redmond’s innovation right now. The products belie this and so do my observations of the product teams’ motivation and high morale. It is really good to see this; Microsoft needs to lead somewhere, and they need to be seen as the underdog while doing so. With Azure, both requirements are in place. BPOS: Bad Acronym, Easy Setup BPOS is about products you already know; Exchange, SharePoint, Live Meeting and Office Communications Server. As such, it’s hard not to be underwhelmed by BPOS. Until you realize how easy it makes it to get all that stuff set up. I would say that from sign-up to productive use took me about 45 minutes…and that included the time necessary to wrestle with my DNS provider, set up Outlook and my SmartPhone up to talk to the Exchange account, create my SharePoint site collection, and configure the Outlook Conferencing add-in to talk to the provisioned Live Meeting account. Never before did I think setting up my own Exchange mail could come anywhere close to the simplicity of setting up an SMTP/POP account, and yet BPOS actually made it faster. What I want from my Azure Christmas Next Year Not everything about Microsoft’s cloud is good. I close this post with a list of things I’d like to see addressed: BPOS offerings are still based on the 2007 Wave of Microsoft server technologies. We need to get to 2010, and fast. Arguably, the 2010 products should have been released to the off-premises channel before the on-premise sone. Office 365 can’t come fast enough. Azure’s Internet tooling and domain naming, is scattered and confusing. Deployed ASP.NET applications go to cloudapp.net; SQL Azure and Azure storage work off windows.net. The Azure portal and Project Houston are at azure.com. Then there’s appfabriclabs.com and sqlazurelabs.com. There is a new Silverlight portal that replaces most, but not all of the HTML ones. And Project Houston is Silvelright-based too, though separate from the Silverlight portal tooling. Microsoft is the king off tooling. They should not make me keep an entire OneNote notebook full of portal links, account names, access keys, assemblies and namespaces and do so much CTRL-C/CTRL-V work. I’d like to see more project templates, have them automatically reference the appropriate assemblies, generate the right using/Imports statements and prime my config files with the right markup. Then I want a UI that lets me log in with my Live ID and pick the appropriate project, database, namespace and key string to get set up fast. Beta programs, if they’re open, should onboard me quickly. I know the process is difficult and everyone’s going as fast as they can. But I don’t know why it’s so difficult or why it takes so long. Getting developers up to speed on new features quickly helps popularize the platform. Make this a priority. Make Azure accessible from the simplicity platforms, i.e. ASP.NET Web Pages (Razor) and LightSwitch. Support .NET 4 now. Make WebMatrix, IIS Express and SQL Compact work with the Azure development fabric. Have HTML helpers make Azure programming easier. Have LightSwitch work with SQL Azure and not require SQL Express. LightSwitch has some promising Azure integration now. But we need more. WebMatrix has none and that’s just silly, now that the Extra Small Instance is being introduced. The Windows Azure Platform Training Kit is great. But I want Microsoft to make it even better and I want them to evangelize it much more aggressively. There’s a lot of good material on Azure development out there, but it’s scattered in the same way that the platform is. The Training Kit ties a lot of disparate stuff together nicely. Make it known. Should Old Acquaintance Be Forgot All in all, diving deep into Azure was a good way to end the year. Diving deeper into Azure should a great way to spend next year, not just for me, but for Microsoft too.

Read the article

Making your ASP.NET/HTML Websites Indic aware – accepting Tamil, Telugu, Kannada, Hindi and ot

- by Harish Ranganathan

Its been a month since I wrote my last post. Much of work has been happening around planning for Tech Ed India, the upcoming Virtual TechDays this week as well as our Developer content at the Great Indian Developer Summit 2010. Its going to be one exciting period starting this week and I am glad I would be able to meet a lot of folks who have written to me personally that they would like to catch up at Tech Ed India. For now, I had a chance to meet the Microsoft India Development Centre team that worked on the Microsoft Indic Language Input Tool (erstwhile Akshara). The team updated me that they have also released the scripts so that the Indic input feature can be encapsulated into your own websites. For example, if you are having a web page where you collect user information, you can pretty much make your site indic aware i.e. accept inputs in Tamil, Telugu, Kannada, Hindi etc., All you would need to include would be a bunch of scripts onto your web pages and you are ready to make it, like I said, “indic aware” I have built a sample web page that accepts First Name, Last Name, Address and an additional field. When it comes to accepting indic, sometimes, you may want to avoid the indic input in certain fields and accept it in English. You can specify the MicrosoftILITWebAttach="false" attribute to the Text Boxes and Text Areas (TextMode=”Multiline” in ASP.NET) so that the particular field automatically switches over to English input. Similarly, the moment you specify that the TextMode=”Password” to make it as a password field, it automatically ignores all indic recognition and shows the masked dots for the words entered. Note that, this is, when we are going for the Opt-out mode, where we are specifying that by default all the input controls would need indic awareness and we would specify for those controls where it is not required. The other mode is Opt-in mode where you would need to add a different property to the script definition i.e. attachMode=”optin” . When we do this, we need to explicitly add the MicrosoftILITWebAttach="true" attribute for every control where we need indic input. I have created a sample web page which accepts First Name, Last Name, Address and an additional input field to demonstrate the “Opt-out”. You can copy paste this into any of your web pages to check it <form id="form1" runat="server">  <input type="hidden" id="MicrosoftILITWebEmbedInfo" attachMode="optout" value="" /> <script type="text/javascript" src="http://ilit.microsoft.com/bookmarklet/script/Tamil.js" defer="defer"></script> <div> <h2> Welcome to the Registration Page </h2> <p> First Name: <asp:TextBox runat="server" ID="txtFirstName" /> <br /> <br /> Last Name: <asp:TextBox runat="server" ID="txtLastName" /> <br /> <br /> Password: <asp:TextBox runat="server" ID="txtPassword" TextMode="Password" /> <br /> <br /> Address: <asp:TextBox runat="server" ID="txtAddress" TextMode="MultiLine" Height="100" Width="200" /> <br /> <br /> English Text: <asp:TextBox ID="txtEnglishText" runat="server" MicrosoftILITWebAttach="false" /> </p> <p>  <a style="text-decoration: none" href="http://go.microsoft.com/fwlink/?LinkID=184205&clcid=0x409"><img style="border: 0px" alt="Transliteration by Microsoft" src="http://ilit.microsoft.com/bookmarklet/images/attribution.png"></a> </p> </div> </form> If you note the code snippet above, I have included the scripts in the top with the attachMode set to “optout” and for the last TextBox, I have mentioned the MicrosoftILITWebAttach="false” attribute to make it accept English input. Additionally, you also need to add the “Microsoft Indic Language Input Tool attribution image” to your web page as a courtesy to the team that developed this feature. It would basically add a image saying “Transliteration by Microsoft” similar to a Copy Right image. You can see the screen shot below where I have typed it in Tamil. In that you will notice that the password field behaves as expected and the last field accepts English Text. You can also notice the icon that comes in the first textbox that indicates that, the field is going to accept indic text. This sample is using Tamil, but you can pretty much do it for Hindi, Telugu, Kannada, Marathi, Bengali etc., The website for getting the Indic script and other instructions is http://specials.msn.co.in/ilit/WebEmbed.aspx?language=Tamil You can replace the querystring value “Tamil” to other languages as mentioned above to get the respective script. This also works for plain HTML based websites and doesn’t necessarily need you to use ASP.NET to achieve the functionality. Note that, this form is not completely localized. This is transliterated. You can add label controls for FirstName, LastName indication etc., and use the Visual Studio tools to localize and get those values from resource files. In the resource files, you can enter the text in different languages to make this a truly localized page. If you just want to download the Indic Tool Desktop version (that can be used for typing in Word, Excel, pretty much any input area), you can download it from http://specials.msn.co.in/ilit/ In the same page, there is also a web version where you can type and get text then and there if you dont want to install the desktop version. So, go ahead, download / use them in your websites and enjoy the power of Indic. Cheers !!!

Read the article

Retrieving a list of eBay categories using the .NET SDK and GetCategoriesCall

- by Bill Osuch

eBay offers a .Net SDK for its Trading API - this post will show you the basics of making an API call and retrieving a list of current categories. You'll need the category ID(s) for any apps that post or search eBay. To start, download the latest SDK from https://www.x.com/developers/ebay/documentation-tools/sdks/dotnet and create a new console app project. Add a reference to the eBay.Service DLL, and a few using statements: using eBay.Service.Call; using eBay.Service.Core.Sdk; using eBay.Service.Core.Soap; I'm assuming at this point you've already joined the eBay Developer Network and gotten your app IDs and user tokens. If not: Join the developer program Generate tokens Next, add an app.config file that looks like this: <?xml version="1.0"?> <configuration> <appSettings> <add key="Environment.ApiServerUrl" value="https://api.ebay.com/wsapi"/> <add key="UserAccount.ApiToken" value="YourBigLongToken"/> </appSettings> </configuration> And then add the code to get the xml list of categories: ApiContext apiContext = GetApiContext(); GetCategoriesCall apiCall = new GetCategoriesCall(apiContext); apiCall.CategorySiteID = "0"; //Leave this commented out to retrieve all category levels (all the way down): //apiCall.LevelLimit = 4; //Uncomment this to begin at a specific parent category: //StringCollection parentCategories = new StringCollection(); //parentCategories.Add("63"); //apiCall.CategoryParent = parentCategories; apiCall.DetailLevelList.Add(DetailLevelCodeType.ReturnAll); CategoryTypeCollection cats = apiCall.GetCategories(); using (StreamWriter outfile = new StreamWriter(@"C:\Temp\EbayCategories.xml")) { outfile.Write(apiCall.SoapResponse); } GetApiContext() (provided in the sample apps in the SDK) is required for any call: static ApiContext GetApiContext() { //apiContext is a singleton, //to avoid duplicate configuration reading if (apiContext != null) { return apiContext; } else { apiContext = new ApiContext(); //set Api Server Url apiContext.SoapApiServerUrl = ConfigurationManager.AppSettings["Environment.ApiServerUrl"]; //set Api Token to access eBay Api Server ApiCredential apiCredential = new ApiCredential(); apiCredential.eBayToken = ConfigurationManager.AppSettings["UserAccount.ApiToken"]; apiContext.ApiCredential = apiCredential; //set eBay Site target to US apiContext.Site = SiteCodeType.US; return apiContext; } } Running this will give you a large (4 or 5 megs) XML file that looks something like this: <soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"> <soapenv:Body> <GetCategoriesResponse > <Timestamp>2012-06-06T16:03:46.158Z</Timestamp> <Ack>Success</Ack> <CorrelationID>d02dd9e3-295a-4268-9ea5-554eeb2e0e18</CorrelationID> <Version>775</Version> <Build>E775_CORE_BUNDLED_14891042_R1</Build> - <CategoryArray> <Category> <BestOfferEnabled>true</BestOfferEnabled> <AutoPayEnabled>true</AutoPayEnabled> <CategoryID>20081</CategoryID> <CategoryLevel>1</CategoryLevel> <CategoryName>Antiques</CategoryName> <CategoryParentID>20081</CategoryParentID> </Category> <Category> <BestOfferEnabled>true</BestOfferEnabled> <AutoPayEnabled>true</AutoPayEnabled> <CategoryID>37903</CategoryID> <CategoryLevel>2</CategoryLevel> <CategoryName>Antiquities</CategoryName> <CategoryParentID>20081</CategoryParentID> </Category> (etc.) You could work with this, but I wanted a nicely nested view, like this: <CategoryArray> <Category Name='Antiques' ID='20081' Level='1'> <Category Name='Antiquities' ID='37903' Level='2'/> </CategoryArray> ...so I transformed the xml: private void TransformXML(CategoryTypeCollection cats) { XmlElement topLevelElement = null; XmlElement childLevelElement = null; XmlNode parentNode = null; string categoryString = ""; XmlDocument returnDoc = new XmlDocument(); XmlElement root = returnDoc.CreateElement("CategoryArray"); returnDoc.AppendChild(root); XmlNode rootNode = returnDoc.SelectSingleNode("/CategoryArray"); //Loop through CategoryTypeCollection foreach (CategoryType category in cats) { if (category.CategoryLevel == 1) { //Top-level category, so we know we can just add it topLevelElement = returnDoc.CreateElement("Category"); topLevelElement.SetAttribute("Name", category.CategoryName); topLevelElement.SetAttribute("ID", category.CategoryID); rootNode.AppendChild(topLevelElement); } else { // Level number will determine how many Category nodes we are deep categoryString = ""; for (int x = 1; x < category.CategoryLevel; x++) { categoryString += "/Category"; } parentNode = returnDoc.SelectSingleNode("/CategoryArray" + categoryString + "[@ID='" + category.CategoryParentID[0] + "']"); childLevelElement = returnDoc.CreateElement("Category"); childLevelElement.SetAttribute("Name", category.CategoryName); childLevelElement.SetAttribute("ID", category.CategoryID); parentNode.AppendChild(childLevelElement); } } returnDoc.Save(@"C:\Temp\EbayCategories-Modified.xml"); } Yes, there are probably much cleaner ways of dealing with it, but I'm not an xml expert… Keep in mind, eBay categories do not change on a regular basis, so you should be able to cache this data (either in a file or database) for some time. The xml returns a CategoryVersion node that you can use to determine if the category list has changed. Technorati Tags: Csharp, eBay

Read the article

FAQ: Highlight GridView Row on Click and Retain Selected Row on Postback

- by Vincent Maverick Durano

A couple of months ago I’ve written a simple demo about “Highlighting GridView Row on MouseOver”. I’ve noticed many members in the forums (http://forums.asp.net) are asking how to highlight row in GridView and retain the selected row across postbacks. So I’ve decided to write this post to demonstrate how to implement it as reference to others who might need it. In this demo I going to use a combination of plain JavaScript and jQuery to do the client-side manipulation. I presumed that you already know how to bind the grid with data because I will not include the codes for populating the GridView here. For binding the gridview you can refer this post: Binding GridView with Data the ADO.Net way or this one: GridView Custom Paging with LINQ. To get started let’s implement the highlighting of GridView row on row click and retain the selected row on postback. For simplicity I set up the page like this: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>You have selected Row: (<asp:Label ID="Label1" runat="server" />)</h2> <asp:HiddenField ID="hfCurrentRowIndex" runat="server"></asp:HiddenField> <asp:HiddenField ID="hfParentContainer" runat="server"></asp:HiddenField> <asp:Button ID="Button1" runat="server" onclick="Button1_Click" Text="Trigger Postback" /> <asp:GridView ID="grdCustomer" runat="server" AutoGenerateColumns="false" onrowdatabound="grdCustomer_RowDataBound"> <Columns> <asp:BoundField DataField="Company" HeaderText="Company" /> <asp:BoundField DataField="Name" HeaderText="Name" /> <asp:BoundField DataField="Title" HeaderText="Title" /> <asp:BoundField DataField="Address" HeaderText="Address" /> </Columns> </asp:GridView> </asp:Content> Note: Since the action is done at the client-side, when we do a postback like (clicking on a button) the page will be re-created and you will lose the highlighted row. This is normal because the the server doesn't know anything about the client/browser not unless if you do something to notify the server that something has changed. To persist the settings we will use some HiddenFields control to store the data so that when it postback we can reference the value from there. Now here’s the JavaScript functions below: <asp:content id="Content1" runat="server" contentplaceholderid="HeadContent"> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> var prevRowIndex; function ChangeRowColor(row, rowIndex) { var parent = document.getElementById(row); var currentRowIndex = parseInt(rowIndex) + 1; if (prevRowIndex == currentRowIndex) { return; } else if (prevRowIndex != null) { parent.rows[prevRowIndex].style.backgroundColor = "#FFFFFF"; } parent.rows[currentRowIndex].style.backgroundColor = "#FFFFD6"; prevRowIndex = currentRowIndex; $('#<%= Label1.ClientID %>').text(currentRowIndex); $('#<%= hfParentContainer.ClientID %>').val(row); $('#<%= hfCurrentRowIndex.ClientID %>').val(rowIndex); } $(function () { RetainSelectedRow(); }); function RetainSelectedRow() { var parent = $('#<%= hfParentContainer.ClientID %>').val(); var currentIndex = $('#<%= hfCurrentRowIndex.ClientID %>').val(); if (parent != null) { ChangeRowColor(parent, currentIndex); } } </script> </asp:content> The ChangeRowColor() is the function that sets the background color of the selected row. It is also where we set the previous row and rowIndex values in HiddenFields. The $(function(){}); is a short-hand for the jQuery document.ready event. This event will be fired once the page is posted back to the server that’s why we call the function RetainSelectedRow(). The RetainSelectedRow() function is where we referenced the current selected values stored from the HiddenFields and pass these values to the ChangeRowColor() function to retain the highlighted row. Finally, here’s the code behind part: protected void grdCustomer_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.DataRow) { e.Row.Attributes.Add("onclick", string.Format("ChangeRowColor('{0}','{1}');", e.Row.ClientID, e.Row.RowIndex)); } } The code above is responsible for attaching the javascript onclick event for each row and call the ChangeRowColor() function and passing the e.Row.ClientID and e.Row.RowIndex to the function. Here’s the sample output below: That’s it! I hope someone find this post useful! Technorati Tags: jQuery,GridView,JavaScript,TipTricks

Read the article

Reading train stop display names from a resource bundle

- by Frank Nimphius

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} In Oracle JDeveloper 11g R1, you set the display name of a train stop of an ADF bounded task flow train model by using the Oracle JDeveloper Structure Window. To do so Double-click onto the bounded task flow configuration file (XML) located in the Application Navigator so the task flow diagram open In the task flow diagram, select the view activity node for which you want to define the display name. In the Structure Window., expand the view activity node and then the train-stop node therein Add the display name element by using the right-click context menu on the train-stop node, selecting Insert inside train-stop > Display Name Edit the Display Name value with the Property Inspector Following the steps outlined above, you can define static display names – like "PF1" for page fragment 1 shown in the image below - for train stops to show at runtime. In the following, I explain how you can change the static display string to a dynamic string that reads the display label from a resource bundle so train stop labels can be internationalized. There are different strategies available for managing message bundles within an Oracle JDeveloper project. In this blog entry, I decided to build and configure the default properties file as indicated by the projects properties. To learn about the suggested file name and location, open the JDeveloper project properties (use a right mouse click on the project node in the Application Navigator and choose Project Properties. Select the Resource Bundle node to see the suggested name and location for the default message bundle. Note that this is the resource bundle that Oracle JDeveloper would automatically create when you assign a text resource to an ADF Faces component in a page. For the train stop display name, we need to create the message bundle manually as there is no context menu help available in Oracle JDeveloper. For this, use a right mouse click on the JDeveloper project and choose New | General | File from the menu and in the opened dialog. Specify the message bundle file name as the name looked up before in the project properties Resource Bundle option. Also, ensure that the file is saved in a directory structure that matches the package structure shown in the Resource Bundle dialog. For example, you would save the properties file in the View Project's src > adf > sample directory if the package structure was "adf.sample" (adf.sample.ViewControllerBundle). Edit the properties file and define key – values pairs for the train stop component. In the sample, such key value pairs are TrainStop1=Train Stop 1 TrainStop2=Train Stop 2 TrainStop3=Train Stop 3 Next, double click the faces-config.xml file and switch the opened editor to the Overview tab. Select the Application category and press the green plus icon next to the Resource Bundle section. Define the resource bundle Base Name as the package and properties file name, for example adf.sample.ViewControllerBundle Finally, define a variable name for the message bundle so the bundle can be accessed from Expression Language. For this blog example, the name is chosen as "messageBundle". <resource-bundle> <base-name>adf.sample.ViewControllerBundle</base-name> <var>messageBundle</var> </resource-bundle> Next, select the display-name element in the train stop node (similar to when creating the display name) and use the Property Inspector to change the static display string to an EL expression referencing the message bundle. For example: #{messageBundle.TrainStop1} At runtime, the train stops now show display names read from a message bundle (the properties file).

Read the article

Fun with Aggregates

- by Paul White

There are interesting things to be learned from even the simplest queries. For example, imagine you are given the task of writing a query to list AdventureWorks product names where the product has at least one entry in the transaction history table, but fewer than ten. One possible query to meet that specification is: SELECT p.Name FROM Production.Product AS p JOIN Production.TransactionHistory AS th ON p.ProductID = th.ProductID GROUP BY p.ProductID, p.Name HAVING COUNT_BIG(*) < 10; That query correctly returns 23 rows (execution plan and data sample shown below): The execution plan looks a bit different from the written form of the query: the base tables are accessed in reverse order, and the aggregation is performed before the join. The general idea is to read all rows from the history table, compute the count of rows grouped by ProductID, merge join the results to the Product table on ProductID, and finally filter to only return rows where the count is less than ten. This ‘fully-optimized’ plan has an estimated cost of around 0.33 units. The reason for the quote marks there is that this plan is not quite as optimal as it could be – surely it would make sense to push the Filter down past the join too? To answer that, let’s look at some other ways to formulate this query. This being SQL, there are any number of ways to write logically-equivalent query specifications, so we’ll just look at a couple of interesting ones. The first query is an attempt to reverse-engineer T-SQL from the optimized query plan shown above. It joins the result of pre-aggregating the history table to the Product table before filtering: SELECT p.Name FROM ( SELECT th.ProductID, cnt = COUNT_BIG(*) FROM Production.TransactionHistory AS th GROUP BY th.ProductID ) AS q1 JOIN Production.Product AS p ON p.ProductID = q1.ProductID WHERE q1.cnt < 10; Perhaps a little surprisingly, we get a slightly different execution plan: The results are the same (23 rows) but this time the Filter is pushed below the join! The optimizer chooses nested loops for the join, because the cardinality estimate for rows passing the Filter is a bit low (estimate 1 versus 23 actual), though you can force a merge join with a hint and the Filter still appears below the join. In yet another variation, the < 10 predicate can be ‘manually pushed’ by specifying it in a HAVING clause in the “q1” sub-query instead of in the WHERE clause as written above. The reason this predicate can be pushed past the join in this query form, but not in the original formulation is simply an optimizer limitation – it does make efforts (primarily during the simplification phase) to encourage logically-equivalent query specifications to produce the same execution plan, but the implementation is not completely comprehensive. Moving on to a second example, the following query specification results from phrasing the requirement as “list the products where there exists fewer than ten correlated rows in the history table”: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID HAVING COUNT_BIG(*) < 10 ); Unfortunately, this query produces an incorrect result (86 rows): The problem is that it lists products with no history rows, though the reasons are interesting. The COUNT_BIG(*) in the EXISTS clause is a scalar aggregate (meaning there is no GROUP BY clause) and scalar aggregates always produce a value, even when the input is an empty set. In the case of the COUNT aggregate, the result of aggregating the empty set is zero (the other standard aggregates produce a NULL). To make the point really clear, let’s look at product 709, which happens to be one for which no history rows exist: -- Scalar aggregate SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = 709; -- Vector aggregate SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = 709 GROUP BY th.ProductID; The estimated execution plans for these two statements are almost identical: You might expect the Stream Aggregate to have a Group By for the second statement, but this is not the case. The query includes an equality comparison to a constant value (709), so all qualified rows are guaranteed to have the same value for ProductID and the Group By is optimized away. In fact there are some minor differences between the two plans (the first is auto-parameterized and qualifies for trivial plan, whereas the second is not auto-parameterized and requires cost-based optimization), but there is nothing to indicate that one is a scalar aggregate and the other is a vector aggregate. This is something I would like to see exposed in show plan so I suggested it on Connect. Anyway, the results of running the two queries show the difference at runtime: The scalar aggregate (no GROUP BY) returns a result of zero, whereas the vector aggregate (with a GROUP BY clause) returns nothing at all. Returning to our EXISTS query, we could ‘fix’ it by changing the HAVING clause to reject rows where the scalar aggregate returns zero: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID HAVING COUNT_BIG(*) BETWEEN 1 AND 9 ); The query now returns the correct 23 rows: Unfortunately, the execution plan is less efficient now – it has an estimated cost of 0.78 compared to 0.33 for the earlier plans. Let’s try adding a redundant GROUP BY instead of changing the HAVING clause: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY th.ProductID HAVING COUNT_BIG(*) < 10 ); Not only do we now get correct results (23 rows), this is the execution plan: I like to compare that plan to quantum physics: if you don’t find it shocking, you haven’t understood it properly :) The simple addition of a redundant GROUP BY has resulted in the EXISTS form of the query being transformed into exactly the same optimal plan we found earlier. What’s more, in SQL Server 2008 and later, we can replace the odd-looking GROUP BY with an explicit GROUP BY on the empty set: SELECT p.Name FROM Production.Product AS p WHERE EXISTS ( SELECT * FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () HAVING COUNT_BIG(*) < 10 ); I offer that as an alternative because some people find it more intuitive (and it perhaps has more geek value too). Whichever way you prefer, it’s rather satisfying to note that the result of the sub-query does not exist for a particular correlated value where a vector aggregate is used (the scalar COUNT aggregate always returns a value, even if zero, so it always ‘EXISTS’ regardless which ProductID is logically being evaluated). The following query forms also produce the optimal plan and correct results, so long as a vector aggregate is used (you can probably find more equivalent query forms): WHERE Clause SELECT p.Name FROM Production.Product AS p WHERE ( SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () ) < 10; APPLY SELECT p.Name FROM Production.Product AS p CROSS APPLY ( SELECT NULL FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () HAVING COUNT_BIG(*) < 10 ) AS ca (dummy); FROM Clause SELECT q1.Name FROM ( SELECT p.Name, cnt = ( SELECT COUNT_BIG(*) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID GROUP BY () ) FROM Production.Product AS p ) AS q1 WHERE q1.cnt < 10; This last example uses SUM(1) instead of COUNT and does not require a vector aggregate…you should be able to work out why :) SELECT q.Name FROM ( SELECT p.Name, cnt = ( SELECT SUM(1) FROM Production.TransactionHistory AS th WHERE th.ProductID = p.ProductID ) FROM Production.Product AS p ) AS q WHERE q.cnt < 10; The semantics of SQL aggregates are rather odd in places. It definitely pays to get to know the rules, and to be careful to check whether your queries are using scalar or vector aggregates. As we have seen, query plans do not show in which ‘mode’ an aggregate is running and getting it wrong can cause poor performance, wrong results, or both. © 2012 Paul White Twitter: @SQL_Kiwi email: [email protected]

Read the article

Why people don't patch and upgrade?!?

- by Mike Dietrich

Discussing the topic "Why Upgrade" or "Why not Upgrade" is not always fun. Actually the arguments repeat from customer to customer. Typically we hear things such as: A PSU or Patch Set introduces new bugs A new PSU or Patch Set introduces new features which lead to risk and require application verification Patching means risk Patching changes the execution plans Patching requires too much testing Patching is too much work for our DBAs Patching costs a lot of money and doesn't pay out And to be very honest sometimes it's hard for me to stay calm in such discussions. Let's discuss some of these points a bit more in detail. A PSU or Patch Set introduces new bugsWell, yes, that is true as no software containing more than some lines of code is bug free. This applies to Oracle's code as well as too any application or operating system code. But first of all, does that mean you never patch your OS because the patch may introduce new flaws? And second, what is the point of saying "it introduces new bugs"? Does that mean you will never get rid of the mean issues we know about and we fixed already? Scroll down from MOS Note:161818.1 to the patch release you are on, no matter if it's 10.2.0.4 or 11.2.0.3 and check for the Known Issues And Alerts.Will you take responsibility to know about all these issues and refuse to upgrade to 11.2.0.4? I won't. A new PSU or Patch Set introduces new featuresOk, we can discuss that. Offering new functionality within a database patch set is a dubious thing. It has advantages such as in 11.2.0.4 where we backported Database Redaction to. But this is something you will only use once you have an Advanced Security license. I interpret that statement I've heard quite often from customers in a different way: People don't want to get surprises such as new behaviour. This certainly gives everybody a hard time. And we've had many examples in the past (SESSION_CACHED_CURSROS in 10.2.0.4, _DATAFILE_WRITE_ERRORS_CRASH_INSTANCE in 11.2.0.2 and others) where those things weren't documented, not even in the README. Thanks to many friends out there I learned about those as well. So new behaviour is the topic people consider as risky - not really new features. And just to point this out: A PSU never brings in new features or new behaviour by definition! Patching means riskDoes it really mean risk? Yes, there were issues in the past (and sometimes in the present as well) where a patch didn't get installed correctly. But personally I consider it way more risky to not patch. Keep that in mind: The day Oracle publishes an PSU (or CPU) containing security fixes all the great security experts out there go public with their findings as well. So from that day on even my grandma can find out about those issues and try to attack somebody. Now a lot of people say: "My database does not face the internet." And I will answer: "The enemy is sitting already behind your firewalls. And knows potentially about these things." My statement: Not patching introduces way more risk to your environment than patching. Seriously! Patching changes the execution plansDo they really? I agree - there's a very small risk for this happening with Patch Sets. But not with PSUs or CPUs as they contain no optimizer fixes changing behaviour (but they may contain fixes curing wrong-query-result-bugs). But what's the point of a changing execution plan? In Oracle Database 11g it is so simple to be prepared. SQL Plan Management is a free EE feature - so once that occurs you'll put the plan into the Plan Baseline. Basta! Yes, you wouldn't like to get such surprises? Than please use the SQL Performance Analyzer (SPA) from Real Application Testing and you'll detect that easily upfront in minutes. And not to forget this, a plan change can also be very positive!Yes, there's a little risk with a database patchset - and we have many possibilites to detect this before patching. Patching requires too much testingWell, does it really? I have seen in the past 12 years how people test. There are very different efforts and approaches on this. I have seen people spending a hell of money on licenses or on project team staffing. And I have seen people sailing blindly without any tests just going the John-Wayne-approach.Proper tools will allow you to test easily without too much efforts. See the paragraph above. We have used Real Application Testing in so many customer projects reducing the amount of work spend on testing by over 50%. But apart from that at some point you will have to stop testing. If you don't you'll get lost and you'll burn money. There's no 100% guaranty. You will have to deal with a little risk as reaching the final 5% of certainty will cost you the same as it did cost to reach 95%. And doing this will lead to abnormal long product cycles that you'll run behind forever. And this will cost even more money. Patching is too much work for our DBAsPatching is a lot of work. I agree. And it's no fun work. It's boring, annoying. You don't learn much from that. That's why you should try to automate this task. Use the Database's Lifecycle Management Pack. And don't cry about the fact that it costs money. Yes it does. But it will ease the process and you'll save a lot of costs as you don't waste your valuable time with patching. Or use Oracle Database 12c Oracle Multitenant and patch either by unplug/plug or patch an entire container database with all PDBs with one patch in one task. We have customer reference cases proofing it saved them 75% of time, effort and cost since they've used Lifecycle Management Pack. So why don't you use it? Patching costs a lot of money and doesn't pay outWell, see my statements in the paragraph above. And it pays out as flying with a database with 100 known critical flaws in it which are already fixed by Oracle (such as in the Oct 2013 PSU for Oracle Database 12c) will cost ways more in case of failure or even data loss. Bet with me? Let me finally ask you some questions. What cell phone are you using and which OS does it run? Do you have an iPhone 5 and did you upgrade already to iOS 7.0.3? I've just encountered on mine that the alarm (which I rely on when traveling) has gotten now a dependency on the physical switch "sound on/off". If it is switched to "off" physically the alarm rings "silently". What a wonderful example of a behaviour change coming in with a patch set. Will this push you to stay with iOS5 or iOS6? No, because those have security flaws which won't be fixed anymore. What browser are you surfing with? Do you use Mozilla 3.6? Well, congratulations to all the hackers. It will be easy for them to attack you and harm your system. I'd guess you have the auto updater on. Same for Google Chrome, Safari, IE. Right? -Mike The T.htmtableborders, .htmtableborders td, .htmtableborders th {border : 1px dashed lightgrey ! important;} html, body { border: 0px; } body { background-color: #ffffff; } img, hr { cursor: default }

Read the article

convert arabic html to pdf

- by Mariam

<div> <table border="1" width="500px"> <tr> <td colspan="2"> aspdotnetcodebook ????? ???????</td> </tr> <tr> <td> cell1 </td> <td> cell2 </td> </tr> <tr> <td colspan="2"> <asp:Label ID="lblLabel" runat="server" Text=""></asp:Label> <img alt="" src="logo.gif" style="width: 174px; height: 40px" /></td> </tr> <tr> <td colspan="2" dir="rtl"> <h1> <img alt="" height="168" src="http://a.cksource.com/c/1/inc/img/demo-little-red.jpg" style="margin-left: 10px; margin-right: 10px; float: left;" width="120" />????? ????? ??? ??? ?? ?? ??</h1> <p> ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????. <a href="http://en.wikipedia.org/wiki/Brothers_Grimm"> ??????? ????/a> ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????. <a href="http://en.wikipedia.org/wiki/Hood_(headgear%2529" title="Hood (headgear)">?</a><a href="http://en.wikipedia.org/wiki/Hood_(headgear%2529">?????</a> <a href="http://en.wikipedia.org/wiki/Cape" title="Cape">?</a><a href="http://en.wikipedia.org/wiki/Cape">??</a> ?? <a href="http://en.wikipedia.org/wiki/Cloak" title="?????????">?????????</a> ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????. .</p> <p> ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????.</p> <p> ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????.</p> <p> ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????. <a href="http://en.wikipedia.org/wiki/Hunter">??????</a>, ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????. ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????.</p> <p> ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????. <a href="http://en.wikipedia.org/wiki/Enchanted_forest">??????</a>, ?????? ??????? ??????? ???? ?????? ????? ??????? ?????? ???? ?????? ?????? ??????? ????????. ???????? ??? ??????? ??????? ????? ?????? ??????? ?? ??????? ??? ?????? ????? ????? ?????? ????? ???????? ?? ????? ????? ???? ????? ?? ????? ?????? ??????? ??????? ????? ??????? ?????????. </p> </td> </tr> </table> </div> i use itextsharp to convert this content which is stored in DB to pdf file to be downloaded to the user i cant achieve this

Read the article

Real tortoises keep it slow and steady. How about the backups?

- by Maria Zakourdaev

… Four tortoises were playing in the backyard when they decided they needed hibiscus flower snacks. They pooled their money and sent the smallest tortoise out to fetch the snacks. Two days passed and there was no sign of the tortoise. "You know, she is taking a lot of time", said one of the tortoises. A little voice from just out side the fence said, "If you are going to talk that way about me I won't go." Is it too much to request from the quite expensive 3rd party backup tool to be a way faster than the SQL server native backup? Or at least save a respectable amount of storage by producing a really smaller backup files? By saying “really smaller”, I mean at least getting a file in half size. After Googling the internet in an attempt to understand what other “sql people” are using for database backups, I see that most people are using one of three tools which are the main players in SQL backup area: LiteSpeed by Quest SQL Backup by Red Gate SQL Safe by Idera The feedbacks about those tools are truly emotional and happy. However, while reading the forums and blogs I have wondered, is it possible that many are accustomed to using the above tools since SQL 2000 and 2005. This can easily be understood due to the fact that a 300GB database backup for instance, using regular a SQL 2005 backup statement would have run for about 3 hours and have produced ~150GB file (depending on the content, of course). Then you take a 3rd party tool which performs the same backup in 30 minutes resulting in a 30GB file leaving you speechless, you run to management persuading them to buy it due to the fact that it is definitely worth the price. In addition to the increased speed and disk space savings you would also get backup file encryption and virtual restore - features that are still missing from the SQL server. But in case you, as well as me, don’t need these additional features and only want a tool that performs a full backup MUCH faster AND produces a far smaller backup file (like the gain you observed back in SQL 2005 days) you will be quite disappointed. SQL Server backup compression feature has totally changed the market picture. Medium size database. Take a look at the table below, check out how my SQL server 2008 R2 compares to other tools when backing up a 300GB database. It appears that when talking about the backup speed, SQL 2008 R2 compresses and performs backup in similar overall times as all three other tools. 3rd party tools maximum compression level takes twice longer. Backup file gain is not that impressive, except the highest compression levels but the price that you pay is very high cpu load and much longer time. Only SQL Safe by Idera was quite fast with it’s maximum compression level but most of the run time have used 95% cpu on the server. Note that I have used two types of destination storage, SATA 11 disks and FC 53 disks and, obviously, on faster storage have got my backup ready in half time. Looking at the above results, should we spend money, bother with another layer of complexity and software middle-man for the medium sized databases? I’m definitely not going to do so. Very large database As a next phase of this benchmark, I have moved to a 6 terabyte database which was actually my main backup target. Note, how multiple files usage enables the SQL Server backup operation to use parallel I/O and remarkably increases it’s speed, especially when the backup device is heavily striped. SQL Server supports a maximum of 64 backup devices for a single backup operation but the most speed is gained when using one file per CPU, in the case above 8 files for a 2 Quad CPU server. The impact of additional files is minimal. However, SQLsafe doesn’t show any speed improvement between 4 files and 8 files. Of course, with such huge databases every half percent of the compression transforms into the noticeable numbers. Saving almost 470GB of space may turn the backup tool into quite valuable purchase. Still, the backup speed and high CPU are the variables that should be taken into the consideration. As for us, the backup speed is more critical than the storage and we cannot allow a production server to sustain 95% cpu for such a long time. Bottomline, 3rd party backup tool developers, we are waiting for some breakthrough release. There are a few unanswered questions, like the restore speed comparison between different tools and the impact of multiple backup files on restore operation. Stay tuned for the next benchmarks. Benchmark server: SQL Server 2008 R2 sp1 2 Quad CPU Database location: NetApp FC 15K Aggregate 53 discs Backup statements: No matter how good that UI is, we need to run the backup tasks from inside of SQL Server Agent to make sure they are covered by our monitoring systems. I have used extended stored procedures (command line execution also is an option, I haven’t noticed any impact on the backup performance). SQL backup LiteSpeed SQL Backup SQL safe backup database <DBNAME> to disk= '\\<networkpath>\par1.bak' , disk= '\\<networkpath>\par2.bak', disk= '\\<networkpath>\par3.bak' with format, compression EXECUTE master.dbo.xp_backup_database @database = N'<DBName>', @backupname= N'<DBName> full backup', @desc = N'Test', @compressionlevel=8, @filename= N'\\<networkpath>\par1.bak', @filename= N'\\<networkpath>\par2.bak', @filename= N'\\<networkpath>\par3.bak', @init = 1 EXECUTE master.dbo.sqlbackup '-SQL "BACKUP DATABASE <DBNAME> TO DISK= ''\\<networkpath>\par1.sqb'', DISK= ''\\<networkpath>\par2.sqb'', DISK= ''\\<networkpath>\par3.sqb'' WITH DISKRETRYINTERVAL = 30, DISKRETRYCOUNT = 10, COMPRESSION = 4, INIT"' EXECUTE master.dbo.xp_ss_backup @database = 'UCMSDB', @filename = '\\<networkpath>\par1.bak', @backuptype = 'Full', @compressionlevel = 4, @backupfile = '\\<networkpath>\par2.bak', @backupfile = '\\<networkpath>\par3.bak' If you still insist on using 3rd party tools for the backups in your production environment with maximum compression level, you will definitely need to consider limiting cpu usage which will increase the backup operation time even more: RedGate : use THREADPRIORITY option ( values 0 – 6 ) LiteSpeed : use @throttle ( percentage, like 70%) SQL safe : the only thing I have found was @Threads option. Yours, Maria

Read the article

FAQ–Highlight GridView Row on Click and Retain Selected Row on Postback

- by Vincent Maverick Durano

A couple of months ago I’ve written a simple demo about “Highlighting GridView Row on MouseOver”. I’ve noticed many members in the forums (http://forums.asp.net) are asking how to highlight row in GridView and retain the selected row across postbacks. So I’ve decided to write this post to demonstrate how to implement it as reference to others who might need it. In this demo I going to use a combination of plain JavaScript and jQuery to do the client-side manipulation. I presumed that you already know how to bind the grid with data because I will not include the codes for populating the GridView here. For binding the gridview you can refer this post: Binding GridView with Data the ADO.Net way or this one: GridView Custom Paging with LINQ. To get started let’s implement the highlighting of GridView row on row click and retain the selected row on postback. For simplicity I set up the page like this: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>You have selected Row: (<asp:Label ID="Label1" runat="server" />)</h2> <asp:HiddenField ID="hfCurrentRowIndex" runat="server"></asp:HiddenField> <asp:HiddenField ID="hfParentContainer" runat="server"></asp:HiddenField> <asp:Button ID="Button1" runat="server" onclick="Button1_Click" Text="Trigger Postback" /> <asp:GridView ID="grdCustomer" runat="server" AutoGenerateColumns="false" onrowdatabound="grdCustomer_RowDataBound"> <Columns> <asp:BoundField DataField="Company" HeaderText="Company" /> <asp:BoundField DataField="Name" HeaderText="Name" /> <asp:BoundField DataField="Title" HeaderText="Title" /> <asp:BoundField DataField="Address" HeaderText="Address" /> </Columns> </asp:GridView> </asp:Content> Note: Since the action is done at the client-side, when we do a postback like (clicking on a button) the page will be re-created and you will lose the highlighted row. This is normal because the the server doesn't know anything about the client/browser not unless if you do something to notify the server that something has changed. To persist the settings we will use some HiddenFields control to store the data so that when it postback we can reference the value from there. Now here’s the JavaScript functions below: <asp:content id="Content1" runat="server" contentplaceholderid="HeadContent"> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js" type="text/javascript"></script> <script type="text/javascript"> var prevRowIndex; function ChangeRowColor(row, rowIndex) { var parent = document.getElementById(row); var currentRowIndex = parseInt(rowIndex) + 1; if (prevRowIndex == currentRowIndex) { return; } else if (prevRowIndex != null) { parent.rows[prevRowIndex].style.backgroundColor = "#FFFFFF"; } parent.rows[currentRowIndex].style.backgroundColor = "#FFFFD6"; prevRowIndex = currentRowIndex; $('#<%= Label1.ClientID %>').text(currentRowIndex); $('#<%= hfParentContainer.ClientID %>').val(row); $('#<%= hfCurrentRowIndex.ClientID %>').val(rowIndex); } $(function () { RetainSelectedRow(); }); function RetainSelectedRow() { var parent = $('#<%= hfParentContainer.ClientID %>').val(); var currentIndex = $('#<%= hfCurrentRowIndex.ClientID %>').val(); if (parent != null) { ChangeRowColor(parent, currentIndex); } } </script> </asp:content> The ChangeRowColor() is the function that sets the background color of the selected row. It is also where we set the previous row and rowIndex values in HiddenFields. The $(function(){}); is a short-hand for the jQuery document.ready function. This function will be fired once the page is posted back to the server that’s why we call the function RetainSelectedRow(). The RetainSelectedRow() function is where we referenced the current selected values stored from the HiddenFields and pass these values to the ChangeRowColor) function to retain the highlighted row. Finally, here’s the code behind part: protected void grdCustomer_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.DataRow) { e.Row.Attributes.Add("onclick", string.Format("ChangeRowColor('{0}','{1}');", e.Row.ClientID, e.Row.RowIndex)); } } The code above is responsible for attaching the javascript onclick event for each row and call the ChangeRowColor() function and passing the e.Row.ClientID and e.Row.RowIndex to the function. Here’s the sample output below: That’s it! I hope someone find this post useful! Technorati Tags: jQuery,GridView,JavaScript,TipTricks

Read the article

How Can I Safely Destroy Sensitive Data CDs/DVDs?

- by Jason Fitzpatrick

You have a pile of DVDs with sensitive information on them and you need to safely and effectively dispose of them so no data recovery is possible. What’s the most safe and efficient way to get the job done? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader HaLaBi wants to know how he can safely destroy CDs and DVDs with personal data on them: I have old CDs/DVDs which have some backups, these backups have some work and personal files. I always had problems when I needed to physically destroy them to make sure no one will reuse them. Breaking them is dangerous, pieces could fly fast and may cause harm. Scratching them badly is what I always do but it takes long time and I managed to read some of the data in the scratched CDs/DVDs. What’s the way to physically destroy a CD/DVD safely? How should he approach the problem? The Answer SuperUser contributor Journeyman Geek offers a practical solution coupled with a slightly mad-scientist solution: The proper way is to get yourself a shredder that also handles cds – look online for cd shredders. This is the right option if you end up doing this routinely. I don’t do this very often – For small scale destruction I favour a pair of tin snips – they have enough force to cut through a cd, yet are blunt enough to cause small cracks along the sheer line. Kitchen shears with one serrated side work well too. You want to damage the data layer along with shearing along the plastic, and these work magnificently. Do it in a bag, cause this generates sparkly bits. There’s also the fun, and probably dangerous way – find yourself an old microwave, and microwave them. I would suggest doing this in a well ventilated area of course, and not using your mother’s good microwave. There’s a lot of videos of this on YouTube – such as this (who’s done this in a kitchen… and using his mom’s microwave). This results in a very much destroyed cd in every respect. If I was an evil hacker mastermind, this is what I’d do. The other options are better for the rest of us. Another contributor, Keltari, notes that the only safe (and DoD approved) way to dispose of data is total destruction: The answer by Journeyman Geek is good enough for almost everything. But oddly, that common phrase “Good enough for government work” does not apply – depending on which part of the government. It is technically possible to recover data from shredded/broken/etc CDs and DVDs. If you have a microscope handy, put the disc in it and you can see the pits. The disc can be reassembled and the data can be reconstructed — minus the data that was physically destroyed. So why not just pulverize the disc into dust? Or burn it to a crisp? While technically, that would completely eliminate the data, it leaves no record of the disc having existed. And in some places, like DoD and other secure facilities, the data needs to be destroyed, but the disc needs to exist. If there is a security audit, the disc can be pulled to show it has been destroyed. So how can a disc exist, yet be destroyed? Well, the most common method is grinding the disc down to destroy the data, yet keep the label surface of the disc intact. Basically, it’s no different than using sandpaper on the writable side, till the data is gone. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

Read the article

passing values to php print page

- by DAFFODIL

In this wen i select a value in drop down box it will list out that name value in table .There will be a check box ,the checked values should be passed to pring page which is below the 1st part of code. Any help ii be appreciated <?php $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); error_reporting(E_ALL ^ E_NOTICE); $nam=$_REQUEST['select1']; $row=mysql_query("select * from inv where name='$nam'"); while($row1=mysql_fetch_array($row)) { $Name=$row1['Name']; $Address =$row1['Address']; $City=$row1['City']; $Pincode=$row1['Pincode']; $No=$row1['No']; $Date=$row1['Date']; $DCNo=$row1['DCNo']; $DcDate=$row1['DcDate']; $YourOrderNo=$row1['YourOrderNo']; $OrderDate=$row1['OrderDate']; $VendorCode=$row1['VendorCode']; $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; } ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <script type="text/javascript"> function ram() { var q=document.getElementById('qty').value; var r=document.getElementById('rate').value; document.getElementById('amt').value=q*r; } </script> </head> <body> <form id="form1" name="form1" method="post" action=""> <table width="1315" border="0"> <script type="text/javascript"> function g() { form1.submit(); } </script> <tr> <th>Name</th> <th align="left"><select name="select1" onchange="g();"> <option value="" selected="selected">select</option> <?php $row=mysql_query("select Name from inv "); while($row1=mysql_fetch_array($row)) { ?> <option value="<?php echo $row1['Name'];?>"><?php echo $row1['Name'];?></option> <?php } ?> </select></th> </tr> <tr> <th>Address</th> <th align="left"><textarea name="Address"><?php echo $Address;?></textarea></th> </tr> <tr> <th>City</th> <th align="left"><input type="text" name="City" value='<?php echo $City;?>' /></th> </tr> <tr> <th>Pincode</th> <th align="left"><input type="text" name="Pincode" value='<?php echo $Pincode;?>'></th> </tr> <tr> <th>No</th> <th align="left"><input type="text" name="No2" value='<?php echo $No;?>' readonly="" /></th> </tr> <tr> <th>Date</th> <th align="left"><input type="text" name="Date" value='<?php echo $Date;?>' readonly="" /></th> </tr> <tr> <th>DCNo</th> <th align="left"><input type="text" name="DCNo" value='<?php echo $DCNo;?>' readonly="" /></th> </tr> <tr> <th>DcDate:</th> <th align="left"><input type="text" name="DcDate" value='<?php echo $DcDate;?>' /></th> </tr> <tr> <th>YourOrderNo</th> <th align="left"><input type="text" name="YourOrderNo" value='<?php echo $YourOrderNo;?>' readonly="" /></th> </tr> <tr> <th>OrderDate</th> <th align="left"><input type="text" name="OrderDate" value='<?php echo $OrderDate;?>' readonly="" /></th> </tr> <tr> <th width="80">VendorCode</th> <th width="1225" align="left"><input type="text" name="VendorCode" value='<?php echo $VendorCode;?>' readonly="" /></th> </tr> </table> <table width="1313" border="0"> <tr> <td width="44"> </td> <td width="71">SNO</td> <td width="527">DESCRIPTION</td> <td width="214">QUANTITY</td> <td width="214">RATE/UNIT</td> <td width="217">AMOUNT</td> </tr> <?php $i=1; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; ?> <tr> <td><input type="checkbox" name="checkbox" value="checkbox" /></td> <td><input type="text" name="No" value='<?php echo $No;?>' readonly=""/></td> <td><input type="text" name="descofgoods" value='<?php echo $descofgoods;?>' /></td> <td><input type="text" name="qty" maxlength="50000000" id="qty"/></td> <td><input type="text" name="Rate" value='<?php echo $Rate;?>' id="rate" onclick="ram()";></td> <td><input type="text" name="Amount" id="amt"/></td> </tr> <?php $i++;} ?> <tr> <th colspan="2"><a href="pp.php?msg=<?php echo $nam;?>">Print</a></th> </tr> </table> <label></label> </form> </body> </html> - <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title></title> <script type = "text/javascript"> function a() { var q = document.getElementsByName('Amount'); var count = 0; for (i = 0; i < q.length; i++) count += parseInt(q[i].value,10); document.getElementById('s').value = count; } </script> </head> <?php $con = mysql_connect("localhost","root",""); if (!$con) { die('Could not connect: ' . mysql_error()); } mysql_select_db("form1", $con); error_reporting(E_ALL ^ E_NOTICE); $nam=$_GET['msg']; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $Name=$row1['Name']; $Address =$row1['Address']; $City=$row1['City']; $Pincode=$row1['Pincode']; $No=$row1['No']; $Date=$row1['Date']; $DCNo=$row1['DCNo']; $DcDate=$row1['DcDate']; $YourOrderNo=$row1['YourOrderNo']; $OrderDate=$row1['OrderDate']; $VendorCode=$row1['VendorCode']; $SNo=$row1['SNo']; $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; } ?> <body> <form id="form1" name="form1" method="post" action=""> <table width="846" border="0"> <tr> <td width="411" height="113"> </td> <td width="412"> </td> </tr> </table> <table width="846" border="0"> <tr> <td height="38"> </td> </tr> </table> <table width="846" border="0"> <tr> <td width="390" rowspan="4"> </td> <td width="92" height="35"> </td> <td width="136"><?php echo $No;?></td> <td width="36"> </td> <td width="170"><?php echo $Date;?></td> </tr> <tr> <td height="37"> </td> <td><?php echo $DCNo;?></td> <td> </td> <td><?php echo $DcDate;?></td> </tr> <tr> <td height="34"> </td> <td><?php echo $YourOrderNo;?></td> <td> </td> <td><?php echo $OrderDate;?></td> </tr> <tr> <td height="29"> </td> <td><?php echo $VendorCode;?></td> <td> </td> <td> </td> </tr> </table> <table width="845" border="0"> <tr> <td height="38"> </td> <td> </td> <td> </td> <td> </td> <td> </td> </tr> <tr> <td width="34"> </td> <td width="457"> </td> <td width="104"> </td> <td width="79"> </td> <td width="149"> </td> </tr> <?php $i=1; $row=mysql_query("select * from inv where Name='$nam'"); while($row1=mysql_fetch_array($row)) { $descofgoods=$row1['descofgoods']; $Qty=$row1['Qty']; $Rate=$row1['Rate']; $Amount=$row1['Amount']; ?> <tr> <td><?php echo $i;?></td> <td><?php echo $descofgoods;?></td> <td><?php echo $Qty;?></td> <td><?php echo $Rate;?></td> <td><input name="Amount" type = "text" value="<?php echo $Amount; ?>" /></td> </tr> <?php $i++;} ?> </table> <table width="844" border="0"> <tr> <td width="495" height="1065">                                       <input type="text" name="textfield2" width="150" />         </td> <td width="191"> </td> <td width="144"><input type="text" name="to" id="s" onclick="a()";/></td> </tr> </table> </form> </body> </html>

Read the article

Nginx Subdomain Problem

- by user292299

i can't access my subdomain on localhost. my localdomain is localhost.dev and it's work.but i want to auto subdomain for php script (username.localhost.dev) i try this server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev ***.localhost.dev**; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } it's not working.i change server_name for testing server_name localhost.dev asd.localhost.dev; i can't access asd.localhost.dev and i try this double server{} section # You may add here your # server { # ... # } # statements for each of your virtual hosts to this file ## # You should look at the following URL's in order to grasp a solid understanding # of Nginx configuration files in order to fully unleash the power of Nginx. # http://wiki.nginx.org/Pitfalls # http://wiki.nginx.org/QuickStart # http://wiki.nginx.org/Configuration # # Generally, you will want to move this file somewhere, and start with a clean # file but keep this around for reference. Or just disable in sites-enabled. # # Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples. ## server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } ############################### server { access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name asd.localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # root html; # index index.html index.htm; # # location / { # try_files $uri $uri/ =404; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # # root html; # index index.html index.htm; # # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # # ssl_session_timeout 5m; # # ssl_protocols SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; # ssl_prefer_server_ciphers on; # # location / { # try_files $uri $uri/ =404; # } #} i can't success

Read the article

Lambda’s for .NET made easy…

- by mbcrump

The purpose of my blog is to explain things for a beginner to intermediate c# programmer. I’ve seen several blog post that use lambda expressions always assuming the audience is familiar with them. The purpose of this post is to make them simple and easily understood. Let’s begin with a definition. A lambda expression is an anonymous function that can contain expressions and statements, and can be used to create delegates or expression tree types. So anonymous function… delegates or expression tree types? I don’t get it??? Confused yet? Lets break this into a few definitions and jump right into the code. anonymous function – is an "inline" statement or expression that can be used wherever a delegate type is expected. delegate - is a type that references a method. Once a delegate is assigned a method, it behaves exactly like that method. The delegate method can be used like any other method, with parameters and a return value. Expression trees - represent code in a tree-like data structure, where each node is an expression, for example, a method call or a binary operation such as x < y. Don’t worry if this still sounds confusing, lets jump right into the code with a simple 3 line program. We are going to use a Function Delegate (all you need to remember is that this delegate returns a value.) Lambda expressions are used most commonly with the Func and Action delegates, so you will see an example of both of these. Lambda Expression 3 lines. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Func<int, int> myfunc = x => x *x; Console.WriteLine(myfunc(6).ToString()); Console.ReadLine(); } } } Is equivalent to Old way of doing it. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Console.WriteLine(myFunc(6).ToString()); Console.ReadLine(); } static int myFunc(int x) { return x * x; } } } In the example, there is a single parameter, x, and the expression is x*x. I’m going to stop here to make sure you are still with me. A lambda expression is an unnamed method written in place of a delegate instance. In other words, the compiler converts the lambda expression to either a : A delegate instance An expression tree All lambda have the following form: (parameters) => expression or statement block Now look back to the ones we have created. It should start to sink in. Don’t get stuck on the => form, use it as an identifier of a lambda. A Lamba expression can also be written in the following form: Lambda Expression. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Func<int, int> myFunc = x => { return x * x; }; Console.WriteLine(myFunc(6).ToString()); Console.ReadLine(); } } } This form may be easier to read but consumes more space. Lets try an Action delegate – this delegate does not return a value. Action Delegate example. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { Action<string> myAction = (string x) => { Console.WriteLine(x); }; myAction("michael has made this so easy"); Console.ReadLine(); } } } Lambdas can also capture outer variables (such as the example below) A lambda expression can reference the local variables and parameters of the method in which it’s defined. Outer variables referenced by a lambda expression are called captured variables. Capturing Outer Variables using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { string mike = "Michael"; Action<string> myAction = (string x) => { Console.WriteLine("{0}{1}", mike, x); }; myAction(" has made this so easy"); Console.ReadLine(); } } } Lamba’s can also with a strongly typed list to loop through a collection. Used w a strongly typed list. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication7 { class Program { static void Main(string[] args) { List<string> list = new List<string>() { "1", "2", "3", "4" }; list.ForEach(s => Console.WriteLine(s)); Console.ReadLine(); } } } Outputs: 1 2 3 4 I think this will get you started with Lambda’s, as always consult the MSDN documentation for more information. Still confused? Hopefully you are not.

Read the article

The code works but when using printf it gives me a weird answer. Help please [closed]

- by user71458

//Programmer-William Chen //Seventh Period Computer Science II //Problem Statement - First get the elapsed times and the program will find the //split times for the user to see. // //Algorithm- First the programmer makes the prototype and calls them in the //main function. The programmer then asks the user to input lap time data. //Secondly, you convert the splits into seconds and subtract them so you can //find the splits. Then the average is all the lap time's in seconds. Finally, //the programmer printf all the results for the user to see. #include <iostream> #include <stdlib.h> #include <math.h> #include <conio.h> #include <stdio.h> using namespace std; void thisgetsElapsedTimes( int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5); //this is prototype void thisconvertstoseconds ( int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5, int &split1, int &split2, int &split3, int &split4, int &split5);//this too void thisfindsSplits(int &m1, int &m2, int &m3, int &m4, int &m5, int &split1, int &split2, int &split3, int &split4, int &split5, int &split6, int &split7, int &split8, int &split9, int &split10);// this is part of prototype void thisisthesecondconversation (int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S,int &split2S, int &split3S, int &split4S, int &split5S, int &split1, int &split2, int &split3, int &split4, int &split5);//this gets a value void thisfindstheaverage(double &average, int &split1, int &split2, int &split3, int &split4, int &split5);//and this void thisprintsstuff( int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S, int &split2S, int &split3S, int &split4S, int &split5S, double &average); //this prints int main(int argc, char *argv[]) { int m1, m2, m3, m4, m5, s1, s2, s3, s4, s5, split1, split2, split3, split4, split5, split1M, split2M, split3M, split4M, split5M, split1S, split2S, split3S, split4S, split5S; int split6, split7, split8, split9, split10; double average; char thistakescolon; thisgetsElapsedTimes ( m1, m2, m3, m4, m5, s1, s2, s3, s4, s5); thisconvertstoseconds ( m1, m2, m3, m4, m5, s1, s2, s3, s4, s5, split1, split2, split3, split4, split5); thisfindsSplits ( m1, m2, m3, m4, m5, split1, split2, split3, split4, split5, split6, split7, split8, split9, split10); thisisthesecondconversation ( split1M, split2M, split3M, split4M, split5M, split1S, split2S, split3S, split4S, split5S, split1, split2, split3, split4, split5); thisfindstheaverage ( average, split1, split2, split3, split4, split5); thisprintsstuff ( split1M, split2M, split3M, split4M, split5M, split1S, split2S, split3S, split4S, split5S, average); // these are calling statements and they call from the main function to the other functions. system("PAUSE"); return 0; } void thisgetsElapsedTimes(int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5) { char thistakescolon; cout << "Enter the elapsed time:" << endl; cout << " Kilometer 1 "; cin m1 thistakescolon s1; cout << " Kilometer 2 "; cin m2 thistakescolon s2; cout << " Kilometer 3 " ; cin m3 thistakescolon s3; cout << " Kilometer 4 "; cin m4 thistakescolon s4; cout << " Kilometer 5 "; cin m5 thistakescolon s5; // this gets the data required to get the results needed for the user to see // . } void thisconvertstoseconds (int &m1, int &m2, int &m3, int &m4, int &m5, int &s1, int &s2, int &s3, int &s4, int &s5, int &split1, int &split2, int &split3, int &split4, int &split5) { split1 = (m1 * 60) + s1;//this converts for minutes to seconds for m1 split2 = (m2 * 60) + s2;//this converts for minutes to seconds for m2 split3 = (m3 * 60) + s3;//this converts for minutes to seconds for m3 split4 = (m4 * 60) + s4;//this converts for minutes to seconds for m4 split5 = (m5 * 60) + s5;//this converts for minutes to seconds for m5 } void thisfindsSplits (int &m1, int &m2, int &m3, int &m4, int &m5,int &split1, int &split2, int &split3, int &split4, int &split5, int &split6, int &split7, int &split8, int &split9, int &split10)//this is function heading { split6 = split1; //this is split for the first lap. split7 = split2 - split1;//this is split for the second lap. split8 = split3 - split2;//this is split for the third lap. split9 = split4 - split3;//this is split for the fourth lap. split10 = split5 - split4;//this is split for the fifth lap. } void thisfindstheaverage(double &average, int &split1, int &split2, int &split3, int &split4, int &split5) { average = (split1 + split2 + split3 + split4 + split5)/5; // this finds the average from all the splits in seconds } void thisisthesecondconversation (int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S,int &split2S, int &split3S, int &split4S, int &split5S, int &split1, int &split2, int &split3, int &split4, int &split5) { split1M = split1 * 60; //this finds the split times split1S = split1M - split1 * 60; //then this finds split2M = split2 * 60; //and all of this split2S = split2M - split2 * 60; //does basically split3M = split3 * 60; //the same thing split3S = split3M - split3 * 60; //all of it split4M = split4 * 60; //it's also a split4S = split4M - split4 * 60; //function split5M = split5 * 60; //and it finds the splits split5S = split5M - split5 * 60; //for each lap. } void thisprintsstuff (int &split1M, int &split2M, int &split3M, int &split4M, int &split5M, int &split1S, int &split2S, int &split3S, int &split4S, int &split5S, double &average)// this is function heading { printf("\n kilometer 1 %d" , ":02%d",'split1M','split1S'); printf("\n kilometer 2 %d" , ":02%d",'split2M','split2S'); printf("\n kilometer 3 %d" , ":02%d",'split3M','split3S'); printf("\n kilometer 4 %d" , ":02%d",'split4M','split4S'); printf("\n kilometer 5 %d" , ":02%d",'split5M','split5S'); printf("\n your average pace is ",'average',"per kilometer \n", "William Chen\n"); // this printf so the programmer // can allow the user to see // the results from the data gathered. }

Read the article

Online ALTER TABLE in MySQL 5.6

- by Marko Mäkelä

This is the low-level view of data dictionary language (DDL) operations in the InnoDB storage engine in MySQL 5.6. John Russell gave a more high-level view in his blog post April 2012 Labs Release – Online DDL Improvements. MySQL before the InnoDB Plugin Traditionally, the MySQL storage engine interface has taken a minimalistic approach to data definition language. The only natively supported operations were CREATE TABLE, DROP TABLE and RENAME TABLE. Consider the following example: CREATE TABLE t(a INT); INSERT INTO t VALUES (1),(2),(3); CREATE INDEX a ON t(a); DROP TABLE t; The CREATE INDEX statement would be executed roughly as follows: CREATE TABLE temp(a INT, INDEX(a)); INSERT INTO temp SELECT * FROM t; RENAME TABLE t TO temp2; RENAME TABLE temp TO t; DROP TABLE temp2; You could imagine that the database could crash when copying all rows from the original table to the new one. For example, it could run out of file space. Then, on restart, InnoDB would roll back the huge INSERT transaction. To fix things a little, a hack was added to ha_innobase::write_row for committing the transaction every 10,000 rows. Still, it was frustrating that even a simple DROP INDEX would make the table unavailable for modifications for a long time. Fast Index Creation in the InnoDB Plugin of MySQL 5.1 MySQL 5.1 introduced a new interface for CREATE INDEX and DROP INDEX. The old table-copying approach can still be forced by SET old_alter_table=0. This interface is used in MySQL 5.5 and in the InnoDB Plugin for MySQL 5.1. Apart from the ability to do a quick DROP INDEX, the main advantage is that InnoDB will execute a merge-sort algorithm before inserting the index records into each index that is being created. This should speed up the insert into the secondary index B-trees and potentially result in a better B-tree fill factor. The 5.1 ALTER TABLE interface was not perfect. For example, DROP FOREIGN KEY still invoked the table copy. Renaming columns could conflict with InnoDB foreign key constraints. Combining ADD KEY and DROP KEY in ALTER TABLE was problematic and not atomic inside the storage engine. The ALTER TABLE interface in MySQL 5.6 The ALTER TABLE storage engine interface was completely rewritten in MySQL 5.6. Instead of introducing a method call for every conceivable operation, MySQL 5.6 introduced a handful of methods, and data structures that keep track of the requested changes. In MySQL 5.6, online ALTER TABLE operation can be requested by specifying LOCK=NONE. Also LOCK=SHARED and LOCK=EXCLUSIVE are available. The old-style table copying can be requested by ALGORITHM=COPY. That one will require at least LOCK=SHARED. From the InnoDB point of view, anything that is possible with LOCK=EXCLUSIVE is also possible with LOCK=SHARED. Most ALGORITHM=INPLACE operations inside InnoDB can be executed online (LOCK=NONE). InnoDB will always require an exclusive table lock in two phases of the operation. The execution phases are tied to a number of methods: handler::check_if_supported_inplace_alter Checks if the storage engine can perform all requested operations, and if so, what kind of locking is needed. handler::prepare_inplace_alter_table InnoDB uses this method to set up the data dictionary cache for upcoming CREATE INDEX operation. We need stubs for the new indexes, so that we can keep track of changes to the table during online index creation. Also, crash recovery would drop any indexes that were incomplete at the time of the crash. handler::inplace_alter_table In InnoDB, this method is used for creating secondary indexes or for rebuilding the table. This is the ‘main’ phase that can be executed online (with concurrent writes to the table). handler::commit_inplace_alter_table This is where the operation is committed or rolled back. Here, InnoDB would drop any indexes, rename any columns, drop or add foreign keys, and finalize a table rebuild or index creation. It would also discard any logs that were set up for online index creation or table rebuild. The prepare and commit phases require an exclusive lock, blocking all access to the table. If MySQL times out while upgrading the table meta-data lock for the commit phase, it will roll back the ALTER TABLE operation. In MySQL 5.6, data definition language operations are still not fully atomic, because the data dictionary is split. Part of it is inside InnoDB data dictionary tables. Part of the information is only available in the *.frm file, which is not covered by any crash recovery log. But, there is a single commit phase inside the storage engine. Online Secondary Index Creation It may occur that an index needs to be created on a new column to speed up queries. But, it may be unacceptable to block modifications on the table while creating the index. It turns out that it is conceptually not so hard to support online index creation. All we need is some more execution phases: Set up a stub for the index, for logging changes. Scan the table for index records. Sort the index records. Bulk load the index records. Apply the logged changes. Replace the stub with the actual index. Threads that modify the table will log the operations to the logs of each index that is being created. Errors, such as log overflow or uniqueness violations, will only be flagged by the ALTER TABLE thread. The log is conceptually similar to the InnoDB change buffer. The bulk load of index records will bypass record locking. We still generate redo log for writing the index pages. It would suffice to log page allocations only, and to flush the index pages from the buffer pool to the file system upon completion. Native ALTER TABLE Starting with MySQL 5.6, InnoDB supports most ALTER TABLE operations natively. The notable exceptions are changes to the column type, ADD FOREIGN KEY except when foreign_key_checks=0, and changes to tables that contain FULLTEXT indexes. The keyword ALGORITHM=INPLACE is somewhat misleading, because certain operations cannot be performed in-place. For example, changing the ROW_FORMAT of a table requires a rebuild. Online operation (LOCK=NONE) is not allowed in the following cases: when adding an AUTO_INCREMENT column, when the table contains FULLTEXT indexes or a hidden FTS_DOC_ID column, or when there are FOREIGN KEY constraints referring to the table, with ON…CASCADE or ON…SET NULL option. The FOREIGN KEY limitations are needed, because MySQL does not acquire meta-data locks on the child or parent tables when executing SQL statements. Theoretically, InnoDB could support operations like ADD COLUMN and DROP COLUMN in-place, by lazily converting the table to a newer format. This would require that the data dictionary keep multiple versions of the table definition. For simplicity, we will copy the entire table, even for DROP COLUMN. The bulk copying of the table will bypass record locking and undo logging. For facilitating online operation, a temporary log will be associated with the clustered index of table. Threads that modify the table will also write the changes to the log. When altering the table, we skip all records that have been marked for deletion. In this way, we can simply discard any undo log records that were not yet purged from the original table. Off-page columns, or BLOBs, are an important consideration. We suspend the purge of delete-marked records if it would free any off-page columns from the old table. This is because the BLOBs can be needed when applying changes from the log. We have special logging for handling the ROLLBACK of an INSERT that inserted new off-page columns. This is because the columns will be freed at rollback.

Read the article

4 Ways Your Brand Can Jump From the Edge of Space

- by Mike Stiles

Can your brand’s social media content captivate the world and make it hold its collective breath? Can you put something on the screen that’s so compelling that your audience can’t look away? Will they want to make sure their friends see it so they can talk about it? If not, you’re probably not with Red Bull. I was impressed with Red Bull’s approach to social content even before Felix Baumgartner’s stunning skydive from the edge of space. And then they did this. According to Visible Measures, videos of the jump scored 50 million views in 4 days. 1,700 clips were generated from both official and organic sources. The live stream was the most watched YouTube Stream of all time (8 million concurrent viewers). The 2nd most watched live stream was…Felix’ first attempt Oct. 9. Are you ready to compete with that? I ask that question because some brands are still out there tying themselves up in knots about whether or not they should tweet. The public’s time and attention are scarce commodities, commodities they value greatly. The competition amongst brands for that time and attention is intense and going up like Felix’s capsule. If you still view your press releases as “content,” you won’t even be counted as being among the competition. Here are 5 lessons learned from Red Bull’s big leap: 1. They have a total understanding of their target market and audience. Not only do they have an understanding of it, they do something about it. They act on it. They fill the majority of their thoughts with what the audience wants. They hunger for wild applause from that audience. They want to do things that embrace the audience’s lifestyle and immerse in it so the target will identify the brand as “one of them.” Takeaway: BE your target market. 2. They deliver content that strikes the audience right where they emotionally live. If you want your content to have impact, you have to make your audience’s heart race, or make them tear up, or make them laugh. Label them “data points” all you want, but humans are emotional creatures. No message connects that’s not carried in on an emotion. Takeaway: You’re on the inside. If your content doesn’t make you say “wow,” it’s unlikely it will register with fans. 3. They put aside old school marketing and don’t let their content be degraded into a commercial. Their execs seem to understand the value in keeping a lid on the hard sell. So many brands just can’t bring themselves to disconnect advertising and social content. The result is, otherwise decent content gets contaminated with a desperation the viewer can smell a mile away. Think the Baumgartner skydive didn’t do Red Bull any good since he wasn’t drinking one on the way down while singing a jingle? Analysis company Taykey discovered that at the peak of the skydive buzz, about 1% of all online conversation was about the jump. Mentions of Red Bull constituted 1/3 of 1% of all Internet activity. Views of other Red Bull videos also shot up. Takeaway: Chill out with the ads. Your brand will get full credit for entertaining/informing fans in a relevant way, provided you do it. 4. They don’t hesitate to ask, “What can we do next”? Most corporate cultures are a virtual training facility for “we can’t do that.” Few are encouraged to innovate or think big, if think at all. Thinking big involves faith, and work. It means freedom and letting employees run a little wild with their ideas. There will always be the opportunity to let fear of everything that moves creep in and kill grand visions dead in their tracks. Experimenting must be allowed. Failure must be allowed. Red Bull didn’t think big. They thought mega. They tried to outdo themselves. Felix could have gone ahead and jumped halfway up, thinking, “This is still relatively high up. Good enough.” But that wouldn’t have left us breathless. Takeaway: Go for it. Jump. In putting up social properties and gathering fans of your brand, you’ve basically invited people to a party. A good host doesn’t just set out warm beer and stale chips because that’s inexpensive and easy. Be on the lookout for ways to make your guests walk away saying, “That was epic.”

Read the article

Resolving data redundancy up front

- by okeofs

Introduction As all of us do when confronted with a problem, the resource of choice is to ‘Google it’. This is where the plot thickens. Recently I was asked to stage data from numerous databases which were to be loaded into a data warehouse. To make a long story short, I was looking for a manner in which to obtain the table names from each database, to ascertain potential overlap. As the source data comes from a SQL database created from dumps of a third party product, one could say that there were +/- 95 tables for each database. Yes I know that first instinct is to use the system stored procedure “exec sp_msforeachdb 'select "?" AS db, * from [?].sys.tables'”. However, if one stops to think about this, it would be nice to have all the results in a temporary or disc based table; which in itself , implies additional labour. This said, I decided to ‘re-invent’ the wheel. The full code sample may be found at the bottom of this article. Define a few temporary tables and variables declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ -- A temp table to hold the names of my databases CREATE TABLE #rawdata1 ( database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) --A temp table with the same database names as above, HOWEVER using an --Identity number (recNO) as a loop variable. --You will note below that I loop through until I reach 25 (see below) as at --that point the system databases, the reporting server database etc begin. --1- 24 are user databases. These are really what I was looking for. --Whilst NOT the best solution,it works and the code was meant as a quick --and dirty. CREATE TABLE #rawdata11 ( recNo int identity(1,1), database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) --My output table showing the database name and table name CREATE TABLE ##rawdata3 ( database_name varchar(75) , table_name varchar(75), ) Insert the database names into a temporary table I pull the database names using the system stored procedure sp_databases INSERT INTO #rawdata1 EXEC sp_databases Go Insert the results from #rawdata1 into a table containing a record number #rawdata11 so that I can LOOP through the extract INSERT into #rawdata11 select * from #rawdata1 We now declare 3 more variables: @kounter is used to keep track of our position within the loop. @databasename is used to keep track of the’ current ‘ database name being used in the current pass of the loop; as inorder to obtain the tables for that database we need to issue a ‘USE’ statement, an insert command and other related code parts. This is the challenging part. @sql is a varchar(max) variable used to contain the ‘USE’ statement PLUS the’ insert ‘ code statements. We now initalize @kounter to 1 . declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1 The Loop The astute reader will remember that the temporary table #rawdata11 contains our database names and each ‘database row’ has a record number (recNo). I am only interested in record numbers under 25. I now set the value of the temporary variable @DatabaseName (see below) .Note that I used the row number as a part of the predicate. Now, knowing the database name, I can create dynamic T-SQL to be executed using the sp_sqlexec stored procedure (see the code in red below). Finally, after all the tables for that given database have been placed in temporary table ##rawdata3, I increment the counter and continue on. Note that I used a global temporary table to ensure that the result set persists after the termination of the run. At some stage, I plan to redo this part of the code, as global temporary tables are not really an ideal solution. WHILE (@kounter < 25) BEGIN select @DatabaseName = database_name from #rawdata11 where recNo = @kounter set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec @Sql SET @kounter = @kounter + 1 END The full code extract Here is the full code sample. declare @SQL varchar(max); declare @databasename varchar(75) /* drop table ##rawdata3 drop table #rawdata1 drop table #rawdata11 */ CREATE TABLE #rawdata1 ( database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) CREATE TABLE #rawdata11 ( recNo int identity(1,1), database_name varchar(50) , database_size varchar(50), remarks Varchar(50) ) CREATE TABLE ##rawdata3 ( database_name varchar(75) , table_name varchar(75), ) INSERT INTO #rawdata1 EXEC sp_databases go INSERT into #rawdata11 select * from #rawdata1 declare @kounter int; declare @databasename varchar(75); declare @sql varchar(max); set @kounter = 1 WHILE (@kounter < 25) BEGIN select @databasename = database_name from #rawdata11 where recNo = @kounter set @SQL = 'Use ' + @DatabaseName + ' Insert into ##rawdata3 ' + + ' SELECT table_catalog,Table_name FROM information_schema.tables' exec sp_sqlexec @Sql SET @kounter = @kounter + 1 END select * from ##rawdata3 where table_name like '%SalesOrderHeader%'

Read the article

Null reading in stream images? Unable to start activity ComponentInfo

- by lasmith

I have reviewed a lot of similar questions regarding not being able to launch an activity but they don't seem to quite match my problem. I am working on a simple black jack game but its force quitting. I suspect there is a problem with loading up the card png images I have. Stepping through the debugger it crashes right while in the resetGame() function. I'm sure I am doing something dumb. My Logcat: 10-15 20:21:43.309: E/AndroidRuntime(2863): FATAL EXCEPTION: main 10-15 20:21:43.309: E/AndroidRuntime(2863): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.smith.blackjack/com.smith.blackjack.Main}: java.lang.NullPointerException 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2059) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2084) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.ActivityThread.access$600(ActivityThread.java:130) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1195) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.os.Handler.dispatchMessage(Handler.java:99) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.os.Looper.loop(Looper.java:137) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.ActivityThread.main(ActivityThread.java:4745) 10-15 20:21:43.309: E/AndroidRuntime(2863): at java.lang.reflect.Method.invokeNative(Native Method) 10-15 20:21:43.309: E/AndroidRuntime(2863): at java.lang.reflect.Method.invoke(Method.java:511) 10-15 20:21:43.309: E/AndroidRuntime(2863): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:786) 10-15 20:21:43.309: E/AndroidRuntime(2863): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:553) 10-15 20:21:43.309: E/AndroidRuntime(2863): at dalvik.system.NativeStart.main(Native Method) 10-15 20:21:43.309: E/AndroidRuntime(2863): Caused by: java.lang.NullPointerException 10-15 20:21:43.309: E/AndroidRuntime(2863): at com.smith.blackjack.DeckOfCards.<init>(DeckOfCards.java:17) 10-15 20:21:43.309: E/AndroidRuntime(2863): at com.smith.blackjack.Main.resetGame(Main.java:98) 10-15 20:21:43.309: E/AndroidRuntime(2863): at com.smith.blackjack.Main.onCreate(Main.java:67) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.Activity.performCreate(Activity.java:5008) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1079) 10-15 20:21:43.309: E/AndroidRuntime(2863): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2023) 10-15 20:21:43.309: E/AndroidRuntime(2863): ... 11 more My androidmanifest: <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.smith.blackjack" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="11" android:targetSdkVersion="15" /> <application android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <activity android:name=".Main" android:label="@string/title_activity_main" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> Here is my Main.java package com.smith.blackjack; import android.os.Bundle; import android.app.Activity; import android.content.res.AssetManager; import android.graphics.drawable.Drawable; import java.io.IOException; import java.io.InputStream; import android.util.Log; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.ImageView; public class Main extends Activity { private ImageView dealerCard0; private ImageView dealerCard1; private ImageView dealerCard2; private ImageView dealerCard3; private ImageView playerCard0; private ImageView playerCard1; private ImageView playerCard2; private ImageView playerCard3; private ImageView imgResult; private Button btnDeal; private Button btnDraw; private Button btnHold; private DeckOfCards deckOfCards; private int[] dealerValues; private int dealerSum; private int dealerCardNumber; private int[] playerValues; private int playerSum; private int playerCardNumber; private InputStream dealerHiddenCard; private Card dealerCard; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); dealerCard0 = (ImageView) findViewById(R.id.dealerCard0); dealerCard1 = (ImageView) findViewById(R.id.dealerCard1); dealerCard2 = (ImageView) findViewById(R.id.dealerCard2); dealerCard3 = (ImageView) findViewById(R.id.dealerCard3); playerCard0 = (ImageView) findViewById(R.id.playerCard0); playerCard1 = (ImageView) findViewById(R.id.playerCard1); playerCard2 = (ImageView) findViewById(R.id.playerCard2); playerCard3 = (ImageView) findViewById(R.id.playerCard3); imgResult = (ImageView) findViewById(R.id.imgResult); btnDeal = (Button) findViewById(R.id.deal); btnDraw = (Button) findViewById(R.id.draw); btnHold = (Button) findViewById(R.id.hold); btnDeal.setOnClickListener(btnDealListener); btnDraw.setOnClickListener(btnDrawListener); btnHold.setOnClickListener(btnHoldListener); resetGame(); } private void resetGame(){ AssetManager assets = getAssets(); dealerValues = new int[4]; playerValues = new int[4]; dealerSum = 0; playerSum = 0; dealerCardNumber = 0; playerCardNumber = 0; for (int i = 0; i < 4; i++) { dealerValues[i] = 0; playerValues[i] = 0; } try { InputStream stream = assets.open("cardback.png"); // stream = assets.open("cardback.png"); Drawable cardImage = Drawable.createFromStream(stream, null); dealerCard0.setImageDrawable(cardImage); dealerCard1.setImageDrawable(cardImage); dealerCard2.setImageDrawable(cardImage); dealerCard3.setImageDrawable(cardImage); playerCard0.setImageDrawable(cardImage); playerCard1.setImageDrawable(cardImage); playerCard2.setImageDrawable(cardImage); playerCard3.setImageDrawable(cardImage); imgResult.setImageDrawable(cardImage); deckOfCards = new DeckOfCards(); deckOfCards.shuffle(); assets.close(); } catch (IOException e){ Log.e("Reset Game", "Error Loading", e); } } public OnClickListener btnDealListener = new OnClickListener() { // @Override public void onClick(View v) { try { AssetManager assets = getAssets(); InputStream stream; // first player card Card newCard; newCard = deckOfCards.dealCard(); playerValues[playerCardNumber] = newCard.faceValue; playerCardNumber++; stream = assets.open(newCard.File); Drawable cardImage = Drawable.createFromStream(stream, newCard.File); playerCard0.setImageDrawable(cardImage); assets.close(); // second player card newCard = deckOfCards.dealCard(); playerValues[playerCardNumber] = newCard.faceValue; playerCardNumber++; stream = assets.open(newCard.File); cardImage = Drawable.createFromStream(stream, newCard.File); playerCard1.setImageDrawable(cardImage); assets.close(); // first dealer card hidden newCard = deckOfCards.dealCard(); dealerCard = newCard; dealerValues[dealerCardNumber] = newCard.faceValue; dealerCardNumber++; dealerHiddenCard = assets.open(newCard.File); stream = assets.open("cardback.png"); cardImage = Drawable.createFromStream(stream, "cardback"); dealerCard0.setImageDrawable(cardImage); assets.close(); // second dealer card open newCard = deckOfCards.dealCard(); dealerValues[dealerCardNumber] = newCard.faceValue; dealerCardNumber++; stream = assets.open(newCard.File); cardImage = Drawable.createFromStream(stream, newCard.File); dealerCard1.setImageDrawable(cardImage); assets.close(); } catch (IOException e){ Log.e("Deal", "Error Loading", e); } }; }; public OnClickListener btnDrawListener = new OnClickListener() { // @Override public void onClick(View v) { try { AssetManager assets = getAssets(); InputStream stream; // get next player card Card newCard; newCard = deckOfCards.dealCard(); playerValues[playerCardNumber] = newCard.faceValue; playerCardNumber++; stream = assets.open(newCard.File); Drawable cardImage = Drawable.createFromStream(stream, newCard.File); switch (playerCardNumber){ case 3: playerCard2.setImageDrawable(cardImage); case 4: playerCard3.setImageDrawable(cardImage); } assets.close(); } catch (IOException e){ Log.e("Draw", "Error Loading", e); } }; }; public OnClickListener btnHoldListener = new OnClickListener() { // @Override public void onClick(View v) { Drawable cardImage; // evaluate player hand playerSum = evaluate(playerValues); if (playerSum > 21){ // player losses } // flip over the dealer hidden card cardImage = Drawable.createFromStream(dealerHiddenCard, dealerCard.File); Card newCard; InputStream stream; AssetManager assets = getAssets(); for (int i=2; i<4; i++){ dealerSum = evaluate(dealerValues); if (dealerSum < 16 ) { newCard = deckOfCards.dealCard(); dealerValues[dealerCardNumber] = newCard.faceValue; dealerCardNumber++; try { stream = assets.open(newCard.File); cardImage = Drawable.createFromStream(stream, newCard.File); switch (dealerCardNumber){ case 3: dealerCard2.setImageDrawable(cardImage); case 4: dealerCard3.setImageDrawable(cardImage); } assets.close(); } catch (IOException e){ Log.e("Draw", "Error Loading", e); } if (dealerSum < playerSum) { // player wins } if (dealerSum > playerSum){ // dealer wins } if (dealerSum == playerSum){ // it is a draw } } } }; }; public int evaluate (int[]values) { int sumCards = 0; for (int i = 0; i < 4; i++){ sumCards += values[i]; } if (sumCards > 21) { for (int i = 0; i < 4; i++){ if (values[i] == 11) { values[i] = 1; sumCards -= 10; continue; } } } return sumCards; } } My DeckOfCards class: package com.smith.blackjack; import java.util.Random; public class DeckOfCards { private Card [] deck; private int currentCard; private static final int NUMBER_OF_CARDS = 52; private static final Random randomNumbers = new Random(); public DeckOfCards () { deck = new Card[NUMBER_OF_CARDS]; currentCard = 0 ; for(int count = 0; count < deck.length; count++) { deck[count].faceValue = count + 1; } } public void shuffle () { currentCard = 0; for (int first = 0; first < deck.length; first ++){ int second = randomNumbers.nextInt(NUMBER_OF_CARDS); int temp = deck[first].faceValue; deck[first].faceValue=deck[second].faceValue; deck[second].faceValue = temp; } } public Card dealCard(){ Card temp = new Card(); temp.faceValue = 0; temp.File = ""; if(currentCard < deck.length) { temp.faceValue = deck[currentCard].faceValue / 4; int suit = deck[currentCard].faceValue % 4; String suitString = ""; switch (suit){ case 0: suitString = "c"; case 1: suitString = "d"; case 2: suitString = "h"; case 3: suitString = "s"; } Integer face = temp.faceValue / 4 ; String faceString = face.toString(); temp.File = faceString + suitString + ".png"; switch (temp.faceValue){ case 11: temp.faceValue = 10; case 12: temp.faceValue = 10; case 13: temp.faceValue = 10; } return temp; } else return temp; } }

Read the article

UIView with IrrlichtScene - iOS

- by user1459024

i have a UIViewController in a Storyboard and want to draw a IrrlichtScene in this View Controller. My Code: WWSViewController.h #import <UIKit/UIKit.h> @interface WWSViewController : UIViewController { IBOutlet UILabel *errorLabel; } @end WWSViewController.mm #import "WWSViewController.h" #include "../../ressources/irrlicht/include/irrlicht.h" using namespace irr; using namespace core; using namespace scene; using namespace video; using namespace io; using namespace gui; @interface WWSViewController () @end @implementation WWSViewController -(void)awakeFromNib { errorLabel = [[UILabel alloc] init]; errorLabel.text = @""; IrrlichtDevice *device = createDevice( video::EDT_OGLES1, dimension2d<u32>(640, 480), 16, false, false, false, 0); /* Set the caption of the window to some nice text. Note that there is an 'L' in front of the string. The Irrlicht Engine uses wide character strings when displaying text. */ device->setWindowCaption(L"Hello World! - Irrlicht Engine Demo"); /* Get a pointer to the VideoDriver, the SceneManager and the graphical user interface environment, so that we do not always have to write device->getVideoDriver(), device->getSceneManager(), or device->getGUIEnvironment(). */ IVideoDriver* driver = device->getVideoDriver(); ISceneManager* smgr = device->getSceneManager(); IGUIEnvironment* guienv = device->getGUIEnvironment(); /* We add a hello world label to the window, using the GUI environment. The text is placed at the position (10,10) as top left corner and (260,22) as lower right corner. */ guienv->addStaticText(L"Hello World! This is the Irrlicht Software renderer!", rect<s32>(10,10,260,22), true); /* To show something interesting, we load a Quake 2 model and display it. We only have to get the Mesh from the Scene Manager with getMesh() and add a SceneNode to display the mesh with addAnimatedMeshSceneNode(). We check the return value of getMesh() to become aware of loading problems and other errors. Instead of writing the filename sydney.md2, it would also be possible to load a Maya object file (.obj), a complete Quake3 map (.bsp) or any other supported file format. By the way, that cool Quake 2 model called sydney was modelled by Brian Collins. */ IAnimatedMesh* mesh = smgr->getMesh("/Users/dbocksteger/Desktop/test/media/sydney.md2"); if (!mesh) { device->drop(); if (!errorLabel) { errorLabel = [[UILabel alloc] init]; } errorLabel.text = @"Konnte Mesh nicht laden."; return; } IAnimatedMeshSceneNode* node = smgr->addAnimatedMeshSceneNode( mesh ); /* To let the mesh look a little bit nicer, we change its material. We disable lighting because we do not have a dynamic light in here, and the mesh would be totally black otherwise. Then we set the frame loop, such that the predefined STAND animation is used. And last, we apply a texture to the mesh. Without it the mesh would be drawn using only a color. */ if (node) { node->setMaterialFlag(EMF_LIGHTING, false); node->setMD2Animation(scene::EMAT_STAND); node->setMaterialTexture( 0, driver->getTexture("/Users/dbocksteger/Desktop/test/media/sydney.bmp") ); } /* To look at the mesh, we place a camera into 3d space at the position (0, 30, -40). The camera looks from there to (0,5,0), which is approximately the place where our md2 model is. */ smgr->addCameraSceneNode(0, vector3df(0,30,-40), vector3df(0,5,0)); /* Ok, now we have set up the scene, lets draw everything: We run the device in a while() loop, until the device does not want to run any more. This would be when the user closes the window or presses ALT+F4 (or whatever keycode closes a window). */ while(device->run()) { /* Anything can be drawn between a beginScene() and an endScene() call. The beginScene() call clears the screen with a color and the depth buffer, if desired. Then we let the Scene Manager and the GUI Environment draw their content. With the endScene() call everything is presented on the screen. */ driver->beginScene(true, true, SColor(255,100,101,140)); smgr->drawAll(); guienv->drawAll(); driver->endScene(); } /* After we are done with the render loop, we have to delete the Irrlicht Device created before with createDevice(). In the Irrlicht Engine, you have to delete all objects you created with a method or function which starts with 'create'. The object is simply deleted by calling ->drop(). See the documentation at irr::IReferenceCounted::drop() for more information. */ device->drop(); } - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return (interfaceOrientation != UIInterfaceOrientationPortraitUpsideDown); } @end Sadly the result is just a black View in the Simulator. :( Hope here is anyone who can explain me how i draw the scene in a UIView. Furthermore I'm getting this Error: Could not load sprite bank because the file does not exist: #DefaultFont How can i fix it ?

Search Results

Search found 7782 results on 312 pages for 'label statements'.

Page 290/312 | < Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297 | Next Page >

- by russ.bishop

- by Mark Fincham-Oracle

- by Stefan Hinker

- by Michael Snow

- by antonella.buonagurio

- by andrewbrust

- by Harish Ranganathan

- by Bill Osuch

- by Vincent Maverick Durano

- by Frank Nimphius

- by Paul White

- by Mike Dietrich

- by Mariam

- by Maria Zakourdaev

- by Vincent Maverick Durano

- by Jason Fitzpatrick

- by DAFFODIL

- by user292299

- by mbcrump

- by user71458

- by Marko Mäkelä

- by Mike Stiles

- by okeofs

- by lasmith

- by user1459024

< Previous Page | 286 287 288 289 290 291 292 293 294 295 296 297 | Next Page >