Search Results

Search found 11767 results on 471 pages for 'org'.

Page 292/471 | < Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >

  • Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

    - by Justin Kelly
    I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

  • What happened to the Journal of Game Development?

    - by Ricket
    The lengthy mission statement from its website states: The lack of game-specific research has prevented many in the academic community from embracing game development as a serious field of study. The Journal of Game Development (JOGD), however, provides a much-needed, peer-reviewed, medium of communication and the raison d'etre for serious academic research focused solely on game-related issues. The JOGD provides the vehicle for disseminating research and findings indigenous to the game development industry. It is an outlet for peer-reviewed research that will help validate the work and garner acceptance for the study of game development by the academic community. JOGD will serve both the game development industry and academic community by presenting leading-edge, original research, and theoretical underpinnings that detail the most recent findings in related academic disciplines, hardware, software, and technology that will directly affect the way games are conceived, developed, produced, and delivered. The Journal of Game Development was established in 2003. It's hard to find any information about the issues but at four issues per year, I estimate the last issue was distributed sometime in 2005 or 2006. It had a good editorial board of college professors and a founding editor from Ubisoft. The list of articles looks good. The price was reasonable. So what happened to it? Its website recently went down but you can see the last Archive.org version. The editor-in-chief is a professor at my school so I intend to ask him in person in a week or two, but I thought I'd see what you might be able to dig up about it first. Of course I will be sure to add an answer with his official word on the matter at that time.

    Read the article

  • Samba issue with sharing directories on NTFS/FAT32

    - by Microkernel
    I have some strange problems with Samba server. I am using samba Version 3.5.4 on Ubuntu 10.10. I have two Windows XP machines, one on VirtualBox on Ubuntu and another office laptop. Windows machine on VirtualBox has no issues in accessing the shared folders, but the laptop is not able to access all the shared content. The issue faced on laptop is the following. Shared folders on ext3 drives have no issues in accessing, but the contents shared on NTFS and FAT32 drives (mounted ones) are not accessible. When I try to open the shared folder, it asks for user name and password, but doesn't accept when I provide it. (Even if I provide admin login details). I changed workgroup value to the domain_name in office laptop, but still the problem persists. Here is the smdb.conf I am using: [global] workgroup = XXX.XXX.ORG server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d guest ok = Yes [homes] comment = Home Directories [printers] comment = All Printers path = /var/spool/samba read only = No create mask = 0700 printable = Yes browseable = No [print$] comment = Samba server's CD-ROM path = /cdrom force user = nobody force group = nobody locking = No Workgroup was defined as "HOMENET" before, changed it to domain name on the office laptop thinking it was the problem, but for no avail.

    Read the article

  • PASS Location fixed for the next 2 years - Are they listening?

    - by simonsabin
    I've just received the PASS connector newsletter with details of the decision of where to locate the next summits. To me it shows you how you can spin statistics they way you want to. I am very suprised by the numbers 81% said that they would like an east coast event. The spin is that "When we look at responses from only 2008 and 2009 Summit attendees (our most successful ones by far), the number who want a future Summit outside of Seattle drops to 69%." Wow the number drops thats bad. We must stay in Seattle then. My take however is that 69% of those willing to travel to Seattle want an event NOT in Seattle. Doesn't that suggest that people would like an event not in Seattle. I appreciate the comment about the launch years however 2012 isn't going to be a launch year because they need to get SQL out of the door before then to meet the 3 year software assurance cycle. So sticking 2012 in Seattle is IMHO a bad decision. It might keep the cost down for the PASS org, Microsoft and the attendees that live near Seattle but does it keep the cost down for the rest of the SQL Community? They do mention a possibility of an event on the East Coast and I do hope that its not just lip service. Flights for me to the East coast look ~30% cheaper than to Seattle and I've never been to the East Coast. Come on PASS show you are listening to the community.

    Read the article

  • Where or what are the instructions for installing FMOD Ex for Linux to use in g++?

    - by Andrey
    I'm looking for the instructions on how to install FMOD. I want to do extra credit for my computer graphics assignment - sound effects. A teammate wants me to go with something simple, and he suggested that I use FMOD Ex. (If you guys can think of something better, do suggest it, but so far FMOD looks more promising compared to SDL, OpenAL, etc.) Right now I'm having a really hard time finding the instructions for installing the latest version of FMOD (audio content creation tool) on Linux Ubuntu 12.04 LTS (32-bit) so that I can use it in g++ with OpenGL. I checked out this YouTube video: http://www.youtube.com/watch?v=avGxNkiAS9g, but it's for Windows. Then, there is a Ubuntu Forums thread which redirected me to this page: https://wiki.debian.org/FMOD, and it has some dated instructions. I've downloaded FMOD Ex v. 4.44.24, which I believe is the latest version. Now I'm looking at eight files: libfmodex.so; libfmodex64.so; libfmodex64-4.44.24.so; libfmodex-4.44.24.so; libfmodexL.so; libfmodexL64.so; libfmodexL64-4.44.24.so; libfmodexL-4.44.24.so ... not knowing what to do. I've looked everywhere I could think of: StackOverflow, here, YouTube, Google, ... and came up with zilch. Please help. Thanks in advance.

    Read the article

  • Isometric Movement in Javascript In the DOM

    - by deep
    I am creating a game using Javascript. I am not using the HTML5 Canvas Element. The game requires both side view controlles, and Isometric controls, hence the movementMode variable. I have got the specific angles, but I am stuck on an aspect of this. https://chillibyte.makes.org/thimble/movement function draw() { if (keyPressed) { if (whichKey == keys.left) { move(-1,0) } if (whichKey == keys.right) { move(1,0) } if (whichKey == keys.up) { move(0,-1) } if (whichKey == keys.down) { move(0,1) } } } This gives normal up, down , left, and right. i want to refactor this so that i can plugin two variables into the move() function, which will give the movement wanted. Now for the trig. /| / | / | y / | /a___| x Take This Right angled Triangle. given that x is 1, y must be equal to tan(a) That Seems right. However, when I do Math.tan(45), i get a number similar to 1.601. Why? To Sum up this question. I have a function, and i need a function which will converts an angle to a value, which will tell me the number of pixels that i need to go up by, if i only go across 1. Is it Math.tan that i want? or is it something else?

    Read the article

  • CodePlex Daily Summary for Tuesday, October 08, 2013

    CodePlex Daily Summary for Tuesday, October 08, 2013Popular ReleasesTimeWatcher: Time Watcher Beta Stable Release: First release. For x86 & x64 computers. Tested on Windows 7 & Windows 8. The alarm functionality is not yet implemented !!Keepass2Android: 0.9 preview: Support for Dropbox (read/write/sync) Integrated custom file browserLayered Architecture Sample for Azure: Leave Sample - October 2013 (for Azure): Thank You for downloading Layered Architecture Sample. It is important that you read the accompanying README.txt file for setup and installation instructions. Please download and install the Windows Azure SDK before opening these samples. This is a set of revised samples that illustrates how the layered architecture pattern can be applied to web applications that are deployed to Windows Azure. This version is only supported on Visual Studio 2012. This set contains: LeaveSample-WebRoles - AS...NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.DNNParallax: DNNParallax_01.00.03_Install: This software package includes the DNNParallax skin and the DNNParallax container extensions. Version 01.00.03 Added Parallax JS Script Version 01.00.02 Using local scripts only Version 01.00.01 Fixed a minor packaging issueMugen MVVM Toolkit: Mugen MVVM Toolkit 2.0: IntroductionMugen MVVM Toolkit makes it easier to develop Silverlight, WPF, WinRT and WP applications using the Model-View-ViewModel design pattern. The purpose of the toolkit is to provide a simple framework and set of tools for getting up to speed quickly with applications based on the MVVM design pattern. The core of Toolkit contains a navigation system, windows management system, models, validation, etc. Mugen MVVM Toolkit contains all the MVVM classes such as ViewModelBase, RelayCommand,...Office Ribbon Project (under active development): Ribbon (07. Oct. 2013): Fixed Scrollbar Bug if DropDown Button is bigger than screen Added Office 2013 Theme Fixed closing the Ribbon caused a null reference exception in the RibbonButton.Dispose if the DropDown was not created yet Fixed Memory leak fix (unhooked events after Dispose) Fixed ToolStrip Selected Text 2013 and 2007 for Blue and Standard themesDynamics NAV Application Profiler: Dynamics NAV Application Profiler: Dynamics NAV Application ProfilerGhostscript.NET: Ghostscript.NET v.1.1.0.: v.1.1.0. added GhostscriptViewer state handling (SaveState, RestoreState) GhostscriptRasterizer constructor is extended in order to support usage of the existing GhostscriptViewer instance. fixed problem while using a 32-bit assembly with 32-bit version of Ghostscript on 64-bit Windows: It couldn't find a registry key of installed Ghostscript. Reported and fixed by "r0land". v.1.0.9. implemented EPS (Encapsulated PostScript) support for the GhostscriptViewer. added GhostscriptRasterize...Ghostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...cmdradio: v0.1.1 binary: Default download in win32. For other OS see here. This is alpha version. Please report all bugs.Squiggle - A free open source LAN Messenger: Squiggle 3.3 Alpha: Allow using environment variables in configuration file (history db connection string, download folder location, display name, group and message) Fix for history viewer to show the correct history entries History saved with UTC timestamp This is alpha release and not recommended for use in productionMedia Companion: Media Companion MC3.579b: Fixed IMDB actor scraping for Movies and TV. Note: there are a couple of new functions that are not active, as this release needed to be done due to IMDB change. New* TV - context menu for rescrapeing Poster image/Banner image Fixed* Both - Fixed actor scraping from IMDB * Movie - Fixed Tableview if Movie's movieset was not in MC's list of moviesets * Movie - Rename with mediainfo now lowercase. * Both - added ignore "A " in titles. Separate option in General Preferences. * Tv - Changing ...VidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 4819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.Pulse: Pulse 0.6.7.3: Pulse is now accepting donations. To donate by Bitcoin or PayPal see https://pulse.codeplex.com/wikipage?title=Donations Lots of updates in v0.6.7.3: (Feature) New option allows you to disable wallpaper changing when a full screen application is running. This way Pulse doesn't slow down/lag your videos and games :) (Fix) Some users were getting Wallbase errors when logging in. This has been fixed. (Feature) Right click a provider and you can now make a copy of it by selecting the "Dupl...MoreTerra (Terraria World Viewer): MoreTerra 1.11.1: Release 1.11.1 =========== =Bug Fixes= =========== Added more tile blocks (Clouds, crimstone) Added items (binoculars, rope, Pirahna Gun) Added ores (Lead, Tin) Chests now work, I broke them yesterday. =============== =Known Issues= =============== I am having trouble with new background walls. So you will see a red outline for crimson then a pink inside. Same with where I think the queen bee lives.VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Menu Option to delete an Forum Account NEW: Added Support for "ImageTeam.org links FIXED: Fixed Ripping of http://forum.babeunion.com ForumsSimpleExcelReportMaker: Serm 0.03: SourceCode and Sample .Net Framework 3.5 AnyCPU compile.Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.New ProjectsAutomating windows Azure SQL DB Backup using Worker role: This tool is used for backup functionality on SQL Azure database and tables in a periodical timeline.Billard Management System: Billard Management SystemCRM 2013 Duplicate Detection: Add client side duplicate detection back into Dynamics CRM 2013Demo2: Demo2Enough HttpClientExtensions: Enough HttpClientCachingExtensions allows you to store the response of a HttpClient call if caching is allowed.GameEngine: AInvisibleShortcuts: InvisibleShortcuts, create shortcuts to launch applications, visit folders and websites, manipulate files, execute system command lines and do anything!jean108jabbr: 1MyProject2: This is projectSeries Manager: With this tool it is easy to name all your series with the right season, episode and the title of the specific episode. Meta information is provided by the TVDBsport: sportolTechResearch: Technical researchTestProjectTodor: A test project for playing with TFS

    Read the article

  • Why is Ubuntu's clock getting slower or faster?

    - by ændrük
    Ubuntu's clock is off by about a half hour: Where do I even start troubleshooting this? It's allegedly being set "automatically from the Internet". How can I verify that "the Internet" knows what time it is? Details Ubuntu has had plenty of time to communicate with the Internet: $ date; uptime Fri May 18 05:56:00 PDT 2012 05:56:00 up 12 days, 10:48, 2 users, load average: 0.61, 0.96, 1.15 This time server I found via a web search does appear to know the correct time: $ date; ntpdate -q north-america.pool.ntp.org Fri May 18 05:56:09 PDT 2012 server 208.38.65.37, stratum 2, offset 1752.625337, delay 0.10558 server 46.166.138.172, stratum 2, offset 1752.648597, delay 0.10629 server 205.189.158.228, stratum 3, offset 1752.672466, delay 0.11829 18 May 05:56:18 ntpdate[29752]: step time server 208.38.65.37 offset 1752.625337 sec There aren't any reported errors related to NTP: $ grep -ic ntp /var/log/syslog 0 After rebooting, the time was automatically corrected and the following appeared in /var/log/syslog: May 18 17:58:12 aux ntpdate[1891]: step time server 91.189.94.4 offset 1838.497277 sec A log of the offset reported by ntpdate reveals that the clock is drifting by about 9 seconds every hour: $ while true; do ntpdate-debian -q | tail -n 1 >> 'drift.log'; sleep 16m; done ^C $ r -e ' attach(read.table("drift.log", header=FALSE)) clock <- as.POSIXct(paste(V1, V2, V3), format="%d %b %H:%M:%S") fit <- lm(V10~clock) png("drift.png") plot(clock, V10, xlab="Clock time", ylab="Time server offset (s)") abline(fit) mtext(sprintf("Drift rate: %.2f s/hr", fit$coefficients[[2]]*3600)) '

    Read the article

  • Using OData to get Mix10 files

    - by Jon Dalberg
    There has been a lot of talk around OData lately (go to odata.org for more information) and I wanted to get all the videos from Mix ‘10: two great tastes that taste great together. Luckily, Mix has exposed the ‘10 sessions via OData at http://api.visitmix.com/OData.svc, now all I have to do is slap together a bit of code to fetch the videos. Step 1 (cut a hole in the box) Create a new console application and add a new service reference. Step 2 (put your junk in the box) Write a smidgen of code: 1: static void Main(string[] args) 2: { 3: var mix = new Mix.EventEntities(new Uri("http://api.visitmix.com/OData.svc")); 4:   5: var files = from f in mix.Files 6: where f.TypeName == "WMV" 7: select f; 8:   9: var web = new WebClient(); 10: 11: var myVideos = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.MyVideos), "Mix10"); 12:   13: Directory.CreateDirectory(myVideos); 14:   15: files.ToList().ForEach(f => { 16: var fileName = new Uri(f.Url).Segments.Last(); 17: Console.WriteLine(f.Url); 18: web.DownloadFile(f.Url, Path.Combine(myVideos, fileName)); 19: }); 20: } Step 3 (have her open the box) Compile and run. As you can see, the client reference created for the OData service handles almost everything for me. Yeah, I know there is some batch file to download the files, but it relies on cUrl being on the machine – and I wanted an excuse to work with an OData service. Enjoy!

    Read the article

  • Cannot ping router with a static IP assigned?

    - by Uriah
    Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

    Read the article

  • /etc/resolv.conf nameserver fd00::1

    - by user88631
    My /etc/resolv.conf constantly get a mysterious entry, i run a home network with ipv6 provided by ravd, the interface is auto-configured by Network manager (all name server lookups are lost when this line is first in my /etc/resolv.conf) . Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) **# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN** nameserver fd00::1 nameserver 192.168.1.1 search home.int When ping is working cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.1.1 search home.int So something is putting fd00::1 at start of file, not if I ping6 fd00::1 I get Destination unreachable: Administratively prohibited To diagnose this I ran the router with single cable to connected to ubuntu machine. Ran tcpdump + restarted network on ubuntu. "tcpdump ip6 -e -i eth0 | grep fd00" finds nothing, it's not being advertised via the network.. The only hit I got was when an upstream router refused a connection attempt from the ubuntu machine to fd00::1. I have also switched on debug for network manager & it appears to set the mystery line.. 15:22:14 storage-pc NetworkManager[349]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. 15:22:14 storage-pc NetworkManager[349]: <warn> dnsmasq exited with error: Other problem (5) 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281528] [nm-dns-manager.c:598] update_dns(): updating resolv.conf 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281875] [nm-dns-manager.c:719] update_dns(): DNS: plugin dnsmasq ignored (caching disabled) 15:22:14 storage-pc NetworkManager[349]: <info> ((null)): writing resolv.conf to /sbin/resolvconf 15:22:14 storage-pc dbus[2184]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 15:22:14 storage-pc dnsmasq[2875]: reading /etc/resolv.conf 15:22:14 storage-pc dnsmasq[2875]: using nameserver 192.168.1.1#53 15:22:14 storage-pc dnsmasq[2875]: using nameserver fd00::1#53 Any suggestions on how to find out where this comes from?

    Read the article

  • Why kernel source is not installed

    - by Subhajit
    I want to install kernel source in Ubuntu 12.04 which is not installed. I have checked the same using the following command : dpkg -s kernel Output is Kernel is not installed no information available Hence I have followed the following steps to install the same: 1.Installed the Dependencies by the following command: sudo apt-get install gcc libncurses5-dev git-core kernel-package fakeroot build-essential sudo apt-get update && sudo apt-get upgrade Download kernel source by the following command: wget http://www.kernel.org/pub/linux/kernel/v3.x/linux-3.5.tar.bz2 tar -xvf linux-3.5.tar.bz2 cd linux-3.5/ 3.Compiled the source code to generate the .deb packages by the following command make-kpkg clean fakeroot make-kpkg --initrd --append-to-version=-spica kernel_image kernel_headers Install the .deb packages (two .deb packages generated, one is to install the kernel headers, another one is to install the kernel image) by the following command sudo dpkg -i linux-*.deb But after reboot it seems kernel is not installed (checked by dpkg -s kernel). Please tell where I am going wrong. Also, In step 3, I guess I am installing a new kernel (named spica kernel_image) but during the boot up this new kernel is not showing as option. Please help me

    Read the article

  • Box2D how to implement a camera?

    - by Romeo
    By now i have this Camera class. package GameObjects; import main.Main; import org.jbox2d.common.Vec2; public class Camera { public int x; public int y; public int sx; public int sy; public static final float PIXEL_TO_METER = 50f; private float yFlip = -1.0f; public Camera() { x = 0; y = 0; sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public Camera(int x, int y) { this.x = x; this.y = y; sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public void update() { sx = x + Main.APPWIDTH; sy = y + Main.APPHEIGHT; } public void moveCam(int mx, int my) { if(mx >= 0 && mx <= 80) { this.x -= 2; } else if(mx <= Main.APPWIDTH && mx >= Main.APPWIDTH - 80) { this.x += 2; } if(my >= 0 && my <= 80) { this.y += 2; } else if(my <= Main.APPHEIGHT && my >= Main.APPHEIGHT - 80) { this.y -= 2; } this.update(); } public float meterToPixel(float meter) { return meter * PIXEL_TO_METER; } public float pixelToMeter(float pixel) { return pixel / PIXEL_TO_METER; } public Vec2 screenToWorld(Vec2 screenV) { return new Vec2(screenV.x + this.x, yFlip * screenV.y + this.y); } public Vec2 worldToScreen(Vec2 worldV) { return new Vec2(worldV.x - this.x, yFlip * worldV.y - this.y); } } I need to know how to modify the screenToWorld and worldToScreen functions to include the PIXEL_TO_METER scaling.

    Read the article

  • Defunct website taken over by spammer. How to stop them?

    - by Robert
    A friend of mine used to publish a small literary fiction magazine, both in print and on the web. In 2011 she announced that she was quitting, put a note on the website, and carefully unwound the subscriptions. She continued hosting the site (with all the back-issues available for free) until the beginning of this year, when she let the hosting lapse and the domain name expire. Today she discovered that some unknown person has purchased her former domain name and put up a modified version of her entire site. The design is different but all the content is the same, including all of the back-issues of the magazine (and the stories by diverse authors contained within), their cover art, news posts, and even her contact information. All the content would have been available from Archive.org, so it's no mystery how they got it. The only thing noticeably changed is a column added to the front page titled "Favorite Videos", with around 35 links to Youtube videos. The links are named things like "Video (Worry)" and "Video (Squirting)" and the videos all feature a man named Leo giving dubious advice and promoting his life-coaching website. Here's one of the suspect videos. There does not appear to be any connection between the content of the videos and my friend or her magazine. I also posted to the Security StackExchange to ask why someone would do this and what the security risks are to her. What I want to know here is, what can she do to stop them? To be clear she doesn't want the domain name back. She just doesn't want her name and copyrighted material used deceptively. Also, what (if anything) could she have done when shutting down her website to avoid this happening?

    Read the article

  • 14540059 - UPDATE FOR BI PUBLISHER ENTERPRISE 11.1.1.6.0 AUGUST

    - by Tim Dexter
    Its been a while, I know :( I have posts in the pipe just gotta smoke em out! The latest update for BIP 11.1.1.6 was released last week. A bunch of defects have been addressed as you can see below.  13473493 - XMLP TRANSLATION ISSUE OF MILLION (ENG) TO MILLIONES (SPANISH) 13521951 - BIP UPGRADE FROM 10G TO 11.1.1.5.0 IS NOT SUCCESSFULL FOR TIAA-CREF  12542914 - ACC: REPORT VIEWER STRUCTURE HAS ERRORS - NO IFRAME AND NO LANG ATTRIBUTE  13562801 - XML TAG DISPLAY SHOULD DEFAULT TO 'FOLLOW THE DATA 13568043 - BIP QUERY FAILING VALIDATION DUE TO 'COALESCE' KEYWORD 13592901 - THE REPORT IS THROWING AN SQL ERROR THAT REFERENCES CHECKING FOR NULL VALUES 13836696 - BI PUBLISHER REPORT NOT GENERATED WHEN A TEXT FIELD START WITH "E.<SPACE>"  13879206 - DM MIGRATION ISSUES 13888939 - DM: LOV SEARCH CAUSING DB CONNECTION LEAK 13904225 - XSLX ERROR DUE TO URL LINK AND USE OF LIST 13930795 - RTF TEMPLATE GIVING DIFFERENT RESULTS IN DIFFERENT  13942064 - XDOEXCEPTION THROWN WHEN RUNNING PEOPLESOFT TEMPLATES AND XML FILE 13981523 - BI PUBLISHER ON 64-BIT WINDOWS CAN'T CONNECT TO MS ANALYSIS SERVICES CUBE 14039229 - BIP 11.1.1.5.0 REPORTS ARE NOT WORKING ON BIP 11.1.1.6.0  14055793 - BIP 11.1.1.6.0: DATE TYPE INPUT PARAMTER IS NOT DISPLAYING THE CORRECT VALUE USI  14059851 - UNABLE TO GRANT PRIVILEGES TO ROLE: DOMAIN USERS; THE ROLE DOES NOT EXIST 14109967 - LARGE OUTPUT CAUSES OUT OF MEMORY DUE TO LEFT OVER DEBUG CODE 14163973 - ISSUES USING DATA MODEL EDITOR IN BIP 11.1.1.6  14167915 - ORG.XML.SAX.SAXEXCEPTION: DATE FORMAT CANNOT BE NULL  14240045 - EDITING SCHEDULED REPORTS DOES NOT REFLECT VALID VALUES FOR UPGRADED SCHEDULES 14304427 - SEARCH DIALOG NOT BINDING PARAMETER VALUE - INVALID PARAMETER BINDING(S). 14338158 - PASSWORD FIELD SHOULD NOT BE DISPLAYED FOR FMW SECURITY MODEL 14393825 - OBIEE11G: LARGE NUMBER OF OBIPS SESSIONS CREATED WHEN USING SSO AND BI PUB 14558377 - CONT. BUG 14240045:EDITING SCHEDULES IN BI PUBLISHER IS DEFAULTING TO 'ALL' This patch is just for BI Publisher standalone installs. For those of you using BIP within the wider BIEE suite there is the 11.1.1.6.2 BP1 patchset. More details on that here.

    Read the article

  • Ubuntu's security, Gaming, X server, situation [closed]

    - by ShortCircuit
    Little background story. So when I first heard about the NSA spying on people I wasn't surprised, it also was the reason why I switched to Ubuntu. (Full time) It had it's disadvantages when comparing to Windows and it's AAA games and other stuff. My best friend is somewhat upset about me, using full time Ubuntu, because we play a game named "Dayz (an addon for Arma II)" and WineHQ wasn't of any help. Not to mention that he keeps asking me if WineHQ can run Dayz, but he clearly doesn't understand the situation of WineHQ, that it's free, that you have to be happy with what you got at the moment. (I'm not going to dual boot because, how else is gaming on Ubuntu/Linux going to happen?) But whenever I was in a nasty situation where I could do something so simply on Windows and not/hard on Ubuntu, I always thought "It's almost virus free, It's free, No one is spying on me." My Questions: My English isn't all that good, so could some one simplify/explain what the hell is going on the below standing link? Ubuntu Spyware: What to Do? https://www.gnu.org/philosophy/ubuntu-spyware.html When will gaming on Linux/Ubuntu be a real thing? I've heard that the X server's code is a mess and that Wayland will replace X server. When/will this come reality? (I might have understood this wrong.)

    Read the article

  • Google doesn't seem to update the description or title of my homepage

    - by Dayson
    Before we launched our website, we had set up a "coming soon" page and google picked up the title and description from its contents. So the description in the search results said, "Coming soon! Visit epicwhale.org for updates." It's been a few weeks since we launched our website. We've even created a sitemap and submitted it to google. In the google webmaster panel, the pages have been crawled and all the pages are appearing as expected on google, EXCEPT the homepage which is still not updated! The title and description of the homepage in google search results still says coming soon.. The website I am referring to is textmewidget.com and below are the images of the search result. Google: http://i.imgur.com/vAkJg.png I checked on bing too, but it appears to be fine there. Bing: http://i.imgur.com/Q8O6L.png All other pages seem to be indexed fine on google. I don't even have any crawl errors in my reports. So what seems to be the problem? I've already waited for 2 weeks. Thanks in advance!

    Read the article

  • To encryption=on or encryption=off a simple ZFS Crypto demo

    - by darrenm
    I've just been asked twice this week how I would demonstrate ZFS encryption really is encrypting the data on disk.  It needs to be really simple and the target isn't forensics or cryptanalysis just a quick demo to show the before and after. I usually do this small demo using a pool based on files so I can run strings(1) on the "disks" that make up the pool. The demo will work with real disks too but it will take a lot longer (how much longer depends on the size of your disks).  The file hamlet.txt is this one from gutenberg.org # mkfile 64m /tmp/pool1_file # zpool create clear_pool /tmp/pool1_file # cp hamlet.txt /clear_pool # grep -i hamlet /clear_pool/hamlet.txt | wc -l Note the number of times hamlet appears # zpool export clear_pool # strings /tmp/pool1_file | grep -i hamlet | wc -l Note the number of times hamlet appears on disk - it is 2 more because the file is called hamlet.txt and file names are in the clear as well and we keep at least two copies of metadata. Now lets encrypt the file systems in the pool. Note you MUST use a new pool file don't reuse the one from above. # mkfile 64m /tmp/pool2_file # zpool create -O encryption=on enc_pool /tmp/pool2_file Enter passphrase for 'enc_pool': Enter again: # cp hamlet.txt /enc_pool # grep -i hamlet /enc_pool/hamlet.txt | wc -l Note the number of times hamlet appears is the same as before # zpool export enc_pool # strings /tmp/pool2_file | grep -i hamlet | wc -l Note the word hamlet doesn't appear at all! As a said above this isn't indended as "proof" that ZFS does encryption properly just as a quick to do demo.

    Read the article

  • What to choose for a multilingual site with support for Markdown and commenting

    - by Kent
    I want to publish articles at a multilingual site. I want to be able to write an article in two languages and have them available on separate URLs: thesite.foo/english-breakfast thesite.com/engelsk-frukost If the users web browser is set to English I'd like to show a small notice at the top of the Swedish version with a link to the English one. The link should have an appropriate rel attribute for a translation (search for hreflang at http://diveintohtml5.org/semantics.html). There should be a way to list all articles belonging to these sets: Swedish only, English only, Swedish versions + English only, English versions + Swedish only. I'd like to publish these as four RSS-feeds. And I would like to have two versions of the main site, one in Swedish (showing Swedish versions + English only) and one in English (showing English versions). I shall be able to write the articles using Markdown, as that is the formatting language I find most convenient. There should be a way for users to comment. And some kind of way for me to protect myself against comment spam. I am leaning towards learning Drupal. I suspect I'll have to code this behavior myself as a module. To be frank I'd rather work with Java. Is Drupal the way to go? Or is there something more suitable for this project?

    Read the article

  • can't access SAMBA shares on UBUNTU-server from other computers

    - by larand
    Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

    Read the article

  • I have done everything correct on my asp.net website, re: SEO; why aren't google backlinks showing?

    - by Jason Weber
    I recently implemented many SEO techniques for a company on their asp.net website; in 6 months, we jumped from a PR1 to a PR3. But I'm having issues with google backlinking. Here are some of the things I've done: Not only did I set up their own Google+ page 6 months ago, I update it pretty much daily with links, pictures, etc., and I blog about it on my own personal Google+ page and post links, etc. ... They have their own Twitter, Facebook, YouTube, and all are updated almost daily. I've listed in as many quality, relevant directories as possible 6 months ago; I've avoided link farms. The site is solid SEO-wise. Key-phrase rich URLs, schema.org & rich snippets. No duplicate content ... www or non-www 301's, trailing slashes, etc. ... all taken care of. Probably a ton of other things, but basically, the site is all set, SEO-wise. Here's what's confounding: When I do a link:www.example.com in Bing/Yahoo, it shows many backlinks. When I do a link:www.example.com in google, it shows up 0 links. Or when I use a site-ranker like Web Site Rank Tool it's showing 0 backlinks from Google. Any suggestions would be appreciated!

    Read the article

  • Wrong package for Idle-python2.7?

    - by adelval
    I'm running python 2.7 in Ubuntu 3.10, and idle (idle-python2.7) has stopped working. Whenever I try to open a file in a editor window, it is blank, though the file does exist and is not empty/blank. Furthermore, it is not possible to close idle after this, except via a terminal kill command. Idle was working fine before. The problem appeared after I installed a number of things, including idlex, various scipy modules and mpmath, but after trying to repair it in several ways, it seems to be caused by Ubuntu's official idle package. I get this error in the terminal when trying to open a file in idle: Exception in Tkinter callback [...lines ommitted for brevity...] File "/usr/lib/python2.7/idlelib/IOBinding.py", line 129, in coding_spec for line in lst: NameError: global name 'lst' is not defined If you look at the code, it looks like an obvious bug: indeed lst is not defined in the function coding_spec. Furthermore, the source file IOBinding.py in http://fossies.org/dox/Python-2.7.5/IOBinding_8py_source.html is different and doesn't show the problem. Thinking that one of the recently packages had overwritten the file somehow, I've tried a number of things, including reinstalling all Python packages from synaptic, but the wrong IOBinding.py is still there. The reason I think the problem lies with the package itself is that I finally did sudo apt-get remove idle, verified that the idlelib directory was empty, and reinstalled with sudo apt-get install idle; but the wrong IOBinding.py file came back again. I can in fact make idle work again by simply replacing lst by str in the code, but to me that's clearly a no-no. I'm not to happy either about trying to replace just that file from the source python distribution, as other files may be wrong. I want to get the right files from the official package.

    Read the article

  • How can I start the desktop without having to "startx"?

    - by gtldsp
    I dont want to start every time startx is there any way to get GUI Direct login screen. my files are root@ubuntu:~# locate org.conf /usr/share/X11/xorg.conf.d /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/11-evdev-quirks.conf /usr/share/X11/xorg.conf.d/11-evdev-trackpoint.conf /usr/share/X11/xorg.conf.d/50-synaptics.conf /usr/share/X11/xorg.conf.d/50-vmmouse.conf /usr/share/X11/xorg.conf.d/50-wacom.conf /usr/share/X11/xorg.conf.d/51-synaptics-quirks.conf /usr/share/man/man5/xorg.conf.5.gz /usr/share/man/man5/xorg.conf.d.5.gz root@ubuntu:~# cd /usr/share/X11/xorg.conf.d root@ubuntu:/usr/share/X11/xorg.conf.d# ll total 36 drwxr-xr-x 2 root root 4096 Apr 23 04:38 ./ drwxr-xr-x 5 root root 4096 Apr 23 04:38 ../ -rw-r--r-- 1 root root 1099 Apr 4 17:04 10-evdev.conf -rw-r--r-- 1 root root 590 Mar 15 08:52 11-evdev-quirks.conf -rw-r--r-- 1 root root 364 Mar 15 08:52 11-evdev-trackpoint.conf -rw-r--r-- 1 root root 956 Apr 13 06:00 50-synaptics.conf -rw-r--r-- 1 root root 115 Mar 22 09:54 50-vmmouse.conf -rw-r--r-- 1 root root 842 Mar 30 03:13 50-wacom.conf -rw-r--r-- 1 root root 590 Apr 13 05:59 51-synaptics-quirks.conf root@ubuntu:/usr/share/X11/xorg.conf.d# Please provide me step by step details.

    Read the article

  • Java Spotlight Episode 88: HTML 5 and JavaFX 2 with Gerrit Grunwalt

    - by Roger Brinkley
    Interview with Gerrit Grundwalt on HTML 5 and JavaFX 2. Joining us this week on the Java All Star Developer Panel is Arun Gupta, Java EE Guy. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link:  Java Spotlight Podcast in iTunes. Show Notes News Java FX 2.1.1 Documentation updated on the docs.oracle.com/javafx website. Lightview: JavaFX 2 real-time visualizer for Glassfish JavaFX Programmatic POJO Expression Bindings (Part 1 & 2) The Enterprise Side of JavaFX - Leverage the power of FX Markup Language to define the UI for enterprise applications Events June 26-28, Jazoon, Zurich, Switzerland Jun 27, Houston JUG July 5, Java Forum, Stuttgart, Germany Jul 13-14, IndicThreads, Delhi July 30-August 1, JVM Language Summit, Santa Clara Feature InterviewGerrit Grunwald is working as a software engineer at Canoo Engineering AG (Basel, Switzerland). He is responsible for visualizations of all kinds. His technical interests include Java desktop development and specifically the subareas - JavaFX, Java Swing and HTML5 controls.He's a decent frequent blogger (http://www.harmonic-code.org), founder and leader of the Java User Group in Muenster (Germany), where he's also living. He has been involved in the IT industry since 1996, when he began to study physics at the University of Applied Sciences Muenster (Germany). Mail Bag What’s Cool Tab Sweep

    Read the article

  • Creating user UI using Flixel

    - by Jamie Read
    I am new to game development but familiar with programming languages. I have started using Flixel and have a working Breakout game with score and lives. What I am trying to do is add a Start Screen before actually loading the game. I have a create function that adds all the game elements to the stage: override public function create():void // all game elements { How can I add this pre-load Start Screen? I'm not sure if I have to add in the code to this create function or somewhere else and what code to actually add. Eventually I would also like to add saving, loading, options and upgrades too. So any advice with that would be great. Here is my main game.as: package { import org.flixel.*; public class Game extends FlxGame { private const resolution:FlxPoint = new FlxPoint(640, 480); private const zoom:uint = 2; private const fps:uint = 60; public function Game() { super(resolution.x / zoom, resolution.y / zoom, PlayState, zoom); FlxG.flashFramerate = fps; } } } Thanks.

    Read the article

< Previous Page | 288 289 290 291 292 293 294 295 296 297 298 299  | Next Page >