Search Results

Search found 18713 results on 749 pages for 'suggestions wanted'.

Page 293/749 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• External Hard Disk's secter could not be read ?

  - by mgpyone

  I've an 500 GB Seagate External Hard Disk (NTFS) . Currently, I can't open it at Windows. Thus, I've tired with chkdsk command .. but still it stopped and can't continue checking disk.. Also I've tired with fsck on Mac . Then, it shows me the Error .. /Volumes/<HD Name>/ is not a character device CONTINUE? yes /Volumes/<HD Name>/ (NO WRITE) CANNOT READ: BLK 16 CONTINUE? yes THE FOLLOWING DISK SECTORS COULD NOT BE READ: 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, ioctl (GCINFO): Inappropriate ioctl for device fsck: /Volumes/<HD Name>/: can't read disk label The volume I've used is around 300 GB , Thus, it's hard to back up and format again . Thus, any helpful suggestions and solutions will be appreciated pretty well.

  Read the article

• Empty mails received from Plesk-driven server

  - by goreSplatter

  From my Plesk managed server I keep receiving emails addressed to the configured administrator (me). Nothing special there. These mails are sent from an empty sender with no body, no subject nor any other relevant headers. I have changed the server administrator's e-mail address to an alternate one which is then the recipient. The mails are sent at irregular intervals. With variations in the timestamp I get an email every 30 minutes. Then there's a break and two and a half hours later I get the same email. I already have turned of crond for more than a day to see if this is the source of the problem. On that server there is no "foreign" software running which would cause that behavior. I have no more guesses as to why this is happening. Any suggestions?

  Read the article

• How to step down voltage from 208V to 110V

  - by Eric Dennis

  I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

  Read the article

• Hadoop Rolling Small files

  - by Arenstar

  I am running Hadoop on a project and need a suggestion. Generally by default Hadoop has a "block size" of around 64mb.. There is also a suggestion to not use many/small files.. I am currently having very very very small files being put into HDFS due to the application design of flume.. The problem is, that Hadoop <= 0.20 cannot append to files, whereby i have too many files for my map-reduce to function efficiently.. There must be a correct way to simply roll/merge roughly 100 files into one.. Therefore Hadoop is effectively reading 1 large file instead of 10 Any Suggestions??

  Read the article

• Cannot login to fresh Kubuntu installation as admin, but only as guest

  - by Cedric Reichenbach

  I just installed a fresh Kubuntu 12.10 on a machine beside Windows 7. After successful installation, I rebooted and wanted to login. But when I type my password and hit Enter, some command line screen shows up for the split of a second and then it thows me back to the login screen without any error message. It's hard to spot what the command line text says, but I couldn't see any error or something like that. Anyway, when I log in as guest (without password), everything works finely. Also, when going to a system command line (using Ctrl+Alt+F1), I can login with my account without any problems. Does anyone have a clue what is going on and how to fix it?

  Read the article

• Help with Corrupt version of IE8 on WinXPsp3

  - by Anon

  I've upgrade from IE6 to 7 to 8 and back down and back up, but still have critical issues in IE such as * cannot see any version info in "about internet explorer" * cannot run windows update * cannot load SharePoint pages (and other pages using ActiveX or IE-specific dhtml) I've also re-installed sp3, but still no luck. Also, also - I've changed security settings to be most permissive. Next step is blowing it all away and starting with windows7. Short of that, any suggestions are welcome. Thanks in advance.

  Read the article

• Is PO Box on resume to get a call okay?

  - by sanksjaya

  Hello folks! Personally I've applied to quiet a handful of IT admin jobs inside my state and to the ones that are way far away. The sad part is I never miss to get an interview with the jobs in my state, but get a call once in a blue moon from jobs out of my state. Note: All the jobs are of similar nature. Recently one of my friends told me that "Applicants with local addresses are the ones that are even looked upon". How true is this? Does filtering take place at address level before qualifications? Is using a PO box on resume acceptable [one for each state like CA, TX, VA]? Any other suggestions to get calls from out of state? Thank you :) [wiki]

  Read the article

• Include page url in php error_log

  - by scatteredbomb

  I'm working on sorting out all my php errors. I've just setup so that all errors go into one log so I can view them. The problem is that I can't really see what page someone trying to access that gave them an error. Of course I can see the file where the error was generated, but these are often includes used on other pages - so I can't really see what URL a person was attempting to view when this error was displayed, so I can't really replicate the problem. Any suggestions? Is it possible to include the actual page URL?

  Read the article

• Resized NTFS partition, now it wont mount.

  - by H4Z3Y

  I have had a 1.5TB drive used as an external for 6 months or so, then I decided to put it in my linux server for network storage. ntfs was being crazy inefficient so I wanted to change the filesystem to ext4. I used the ntfsresize command to reduce the partition to 650GB and that took abour 2 hours, then I deleted all of the entries in fstab like a guide told me too and created a new one the size of the ntfs partition, or, 650GB. after I modified fstab the ntfs partition would no longer mount and when plugging it in to windows it says "This Hard Drive needs to be formatted". any ideas on how I can recover the data off of the drive? I have 600GB of free space on a different drive so I just need some way of copying them off.

  Read the article

• How to Read XML and Generate SQL Insert

  - by hackerkatt

  I am trying to write a VB Script to read a XML file (downloaded daily) and insert the information into a MSSQL DB. The content of the XML is a list if CDRs (Call Data Records). I need to parse the file and insert the cdr's into a table. I'm a Ruby,Perl,PHP,Javascript,SQL,... programer. But I've really never written any VB Script. I've done some googling and find a number of examples on how to generate XML from a SQL Query, but not the reverse. Any help/suggestions would be greatly appreciated. Thank you!

  Read the article

• Ubuntu server 12.04.03 not checking disk partitions on reboot?

  - by jamesc

  My MOTD is showing: *** /dev/md2 will be checked for errors at next reboot *** *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** However, a standard sudo shutdown -r now does not appear to check the disks and the message remains. My guess is that the partitions 'should' be checked and that they are not being... so how can I get Ubuntu to check the partitions at reboot and keep things nice and safe? Update - this is the output of cat /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md/3 /home ext4 defaults 0 0 Update 2 - One message gone... Using @christianwolff's suggestions... sudo rm /var/lib/update-notifier/fsck-at-reboot sudo touch /forcefsck sudo shutdown -r now And now the motd is down to *** /dev/md1 will be checked for errors at next reboot *** *** /dev/md3 will be checked for errors at next reboot *** So 'md2(ext4)' has been checked and the message updated.

  Read the article

• How to block access to files in the current directory with .htaccess

  - by kfir

  I have a few private files in a public folder and I want to block access to them. For example lets say I have the following files tree: DictA FileA FileA FileB FileC I want to block access to FileB and FileA in the current directory and allow access to the FileA in the DictA directory. The first thing that came to mind was to use the FilesMatch directive as follows: <FilesMatch "^(?:FileA)|(?:FileB)$"> Deny from all </FilesMatch> The problem here is that FileA inside DictA will also be blocked, which is not what I wanted. I could override that by adding another .htaccess file to DictA but I would like to know if there is a solution which wont involve that. P.S: I can't move the private files to a separate folder.

  Read the article

• Wireless Disconnects Randomly, then won't reconnect

  - by Nironan12

  Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

  Read the article

• Problem with Win7 connecting to Internet

  - by Lucas

  Hello, I have had Windows 7 for about a year now and for the first four months it worked perfectly. But for the last 8 months it has been horrible. It will connect to the Internet for about 5 minutes and then just lose connection. It will reconnect in about 5 minues but then it just keeps disconnecting. I ran a virus scan about 2 weeks ago and I found a Trojan on my PC which I removed and dealt with. It was fine after that but now for these last couple days it has been just as bad as before. I think a virus is causing this but I will read any suggestions and tips to help me solve this problem. Thank you. PC DETAILS: OS: WIndows 7 Home Premium 64-Bit- System Model: Aspire M5802- Processor: Intel Core 2 Quad CPU- Memory: 8192MB RAM- Graphics Card: NVIDIA GeForce GT 220

  Read the article

• Laptop Toshiba Satelite M300 screen is completely blank.

  - by Nadia

  Hi, My laptop Toshiba satelite M300 Laptop screen is completely blacked out. It powers up and appears to be running but the screen is blank. I've taken battery pack off and back on again. Before the screen was blacked out, it used to flicker a bit. Also before it blacked out i was having problems with the internet and I was on phone to Internet provider who took me through steps to take my laptop back to a future date where it was operational. It then worked properly for a few days but then switched it on and screen was blank. It's more then a year old so out of warranty. Any suggestions on whether I should pay the $300 bucks to see if they can fix it?

  Read the article

• SQL Server 2005/2008 Licensing Decision

  - by Hakim

  Hello, I have purchased a dedicated server from a reputable Hosting company. They only have Windows Server 2008 OS installed on it and NO Sql server. Server Configuration is Intel Dual core Processor with 2GB of RAM and 100GB HDD. I wanted to host my web services on that server which will be using the MS SQL Server 2005 at the backend.There are multiple web services and each using a different Database. Microsoft has CAL basis Licensing , Which I understand is based on number of users accessing the database directly ( I may be wrong ) . But my users will be accessing the webservice and no direct connection to the database as such. Yes but the number of users accessing the web server cannot be known and is not under my control. Which Licensing is best suited for this kind of setup ? I don't need analysing and BI services right now ,but i may want to upgrade that in future may be. Any help will be appreciated. Thanks

  Read the article

• Can't set correct desktop resolution on Windows 7 after playing Mirror's Edge

  - by DeadMG

  Ever since I launched Mirror's Edge, my entire system seems to think that my monitor is 1600x1200, when actually it's 1920x1080. The game would only go up to 1600x1200, Windows will only go up to 1600x1200, and even my video drivers will only go up that high. The monitor isn't even that aspect ratio. I've rebooted the system to no effect, and installed the latest graphics drivers for my Radeon 5770, unplugged it and re-plugged it, etc. My secondary screen is still working perfectly correctly. Any suggestions?

  Read the article

• Getting "is not a valid mailbox" when email sent to primary address

  - by Juan Tarquino

  Anyone outside my domain who sends me an email is getting a bounced email with the following error from Exchange: 550 550 5.1.1 [email protected] is not a valid mailbox (state 14). I can't receive emails from external addresses until I send an email to one of my secondary addresses. Once I sent it to my secondary address, my primary address will start working for a while and fail again after a few hours. We use Exchange 2003. Anyone has any suggestions on what to try?

  Read the article

• Conflicts between 2 NICs

  - by funbi_grace

  Hi, I have an HP server (Windows server 2003) with 2 external NICs (couldn't get the builtin NIC to work). One is for an internal network of 4 PCs and the other is for part of an Internet-facing network. Many times a day, we have to disable the internal NIC in order to get the other NIC to see the network. I know this is happening on a server, but the issue is more related to the conflicts on the NICs. Any suggestions from the community on where to look for a solution?

  Read the article

• Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

  - by Chake

  here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

  Read the article

• How can I get the current OU with a PowerShell login script?

  - by Frans

  I am setting up a Terminal Server 2008 which will be used by different client organisations, each with multiple individual user accounts. I would like each client organisation to have a drive mapped to \server\clients\ Their OU name is also their client name, so I would like to be able to find their current OU and then use it for the mapping command. The OUs are hierarchicals, so it is the bottom-most OU name I need. Example OU: Dedicated Clients\AjaxCorp Should get a drive mapped to \\server1\shares\AjaxCorp Any suggestions on how I can get the OU? I am sure it must be easy, I just haven't figured it out... I did find information about how to do this with VB script, but as it is a whole new environment I thought it would be nice to use PowerShell instead.

  Read the article

• Error connecting ESX 5.0.0 to domain

  - by Saariko

  I am trying to connect an ESX 5.0.0 to our Domain Controler, in order to give a Domain group specific roles security. But I do not see any groups after the host connects to the domain. Under Configuration - Authentication Services - I connected the host to the domain: I created the role I wanted, with the selected approved features But when I want to add a permission to a set of VM's, I can not see "my domain" on the drop down, only the: "localhost" How do I see "my domain" on the Domain drop down - so I can select the domain group to give the role to? To note: I followed the instructions to connect to the domain form VMware site.

  Read the article

• Directory "Bookmarking" in Linux

  - by Jason R. Mick

  Aside from aliasing and links, is there an easy way in Linux to tag commonly used directories and to navigate to a commonly used directory from the terminal. To be clear the disadvantages I see with alternative approaches, and why I want a bookmark/favorites like system: alias Cons: Too specific (every new favorite requires a new alias...although you could in theory make an alias that echo append your dir as a new alias, which would be sort of clever). Can't nest favorites in folders (can't think of a simple solution to this outside of heavy config scripting). links Cons: Clutter directory make ls a headache. pushd/popd Cons: Non-permanent (without shell config file scripting), can't nest favorites in directories, etc. Granted I have multiple ideas for making my own non-standard solution, but before I have at it I wanted to get some perspective on what's out there and if there is nothing, what is a recommended approach. Does anyone know of such a favorites/bookmark-like terminal solution?

  Read the article

• In VirtualBox, how can I access host localhost from guest (Visual Studio Dev Server from IE7 testing VM)?

  - by Seth

  Host OS is Win7 running MyApp in the Visual Studio Development Server, bound to localhost:51227, VM is VirtualBox configured with NAT. Guest OS is Win XP with IE7 installed. My goal is to debug MyApp (running on host) from within IE7 (running on guest). Visual Studio Development server only binds to the loopback network device (i.e. localhost). It does not bind to the external IP address of my host. I've tried access 10.0.2.2:51227 from IE7 on the guest (and confirmed that 10.0.2.2 is the gateway address using ipconfig), but it appears that 10.0.2.2 binds to the external IP of the Host, NOT the loopback IP (localhost), so this does not work. Any suggestions?

  Read the article

• Can I get 4 screens running on an ATI Radeon HD 5700 series video card?

  - by Wayne

  I have successfully run 3 displays using the 5700, but i want to run a 4th screen off the HDMI Port. Mainly I would like it to Mirror the primary monitor onto the TV connected to the HDMI Port. Any help at all would be greatly appreciated. I can get a signal to it, i just have to disable one of my original 3 monitors. Im not willing to do that. So other than disabling one of my monitors, does anyone have any suggestions?

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >