Search Results

Search found 15798 results on 632 pages for 'authentication required'.

Page 294/632 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

  • Cisco PIX firewall blocking inbound Exchange email

    - by sumsaricum
    [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

    Read the article

  • 389 DS Achitecture for Multiple Sites

    - by Kyle Flavin
    I'm looking to deploy 389 Directory in my environment to replace an existing iPlanet installation. I would be using it primarily to store user account data for authentication purposes. I have two physically separate data centers that I would like to share the same directory tree. My initial thinking is to setup 389 DS as follows: -A Master/Consumer in DataCenter A -A Master/Consumer in DataCenter B -Replication agreement between both masters, to mirror the directory tree in both environments. Does this sound like a reasonable approach? Is there a better way to do it? (ie: four masters?) Is there documentation for best practices when setting up 389 DS in situations such as this? Thanks.

    Read the article

  • Whats a good API for generating reports for a java web application?

    - by Ahmad
    I have a J2EE application that has a lot of reports, the situation now is the following: Report filters' values are sent to the application over DWR mainly, the data are retrieved from Oracle DB throw DB procedures and returned back to the client. However, some customization is required every now and then (new data filters, columns, ordering, ...), and these changes are painful to implement since we need to modify the JSPs, DB Procedures, the application itself, ... What API do you recommend to use for such reports?

    Read the article

  • Image Transformation on iPhone, how to?

    - by Horace Ho
    Since I cannot pre-render all the images in PNGs and real-time image transformation functions are required, namely: skew perspective (like the transform action found in Photoshop) Which API (CoreAnimation? OpenGL ES?) should I look into? Even better, is there any sample code around? Thanks!

    Read the article

  • Building a simple cart using object orientated PHP

    - by James
    I've built basic shopping carts with PHP before but in an attempt to get my feet wet with OOP, I'd like to try using that method. I come from a design background but do understand some basics of OOP but would like to see a tutorial or something simple I could base this on. The site is small and the cart functionality required is very standard. Can anyone offer a link to a decent tutorial or article on building a Cart with PHP OOP, a quick google didn't turn up anything decent.

    Read the article

  • internal implementation of database Queries

    - by harigm
    In my experience I have used many queries like select, order by, where clause etc.. in mysql, sql-server, oracle etc For a moment i have thought, 1)how is this internally written to implement the above queries 2) which language do they use? 3) is that programming language? if yes which language? 4)what kind of environment required to implement this kind of complex database

    Read the article

  • Problem in Installing Wordpress

    - by Nasser Hajloo
    I try to install Wordpress in a Windows Client with WebPI which provided by Microsoft. Everything installed in my client and finally I saw successful message. with a lunch application link. When I click on it I see following error. Your PHP installation appears to be missing the MySQL extension which is required by WordPress. How Can I resolve this issue

    Read the article

  • configure HTTPS server on a cisco router

    - by Sara
    For the past week I was trying to configure an HTTPS server on a cisco 2900 router, I've used the following commands and assigned a username and password to privilege 15 however, when Im trying to access a given ip it requires a username and password however when I insert the username and password I configured it does not allow me to enter and i'm not sure where the problem is. Router(config)# ip http secure-server Router(config)# ip http authentication local These were the commands i used for the https server and also I used the following to assign the username and password Router(config)#username name privilege 15 secret 0 password where 'name' and 'password' represent the username and password respectively I'm trying to access the 192.168.14.1 interface on the router and the username and password i created are not authorized to enter (I got the commands from a cisco router manual)

    Read the article

  • Spam mail through SMTP and user spoofing

    - by Josten Moore
    I have noticed that it's possible to telnet into a mailserver that I own and send spoofed messages to other clients. This only works for the domain that the mail server is regarding; I cannot do it for other domains. For example; lets say that I own example.com. If I telnet example.com 25 I can successfully send a message to another user without authentication: HELO local MAIL FROM: [email protected] RCPT TO: [email protected] DATA SUBJECT: Whatever this is spam Spam spam spam . I consider this a big problem; how do I secure this?

    Read the article

  • Cocoa Browser Air missing iPhone docs. Can't find xcode DocSets?

    - by Mike Howard
    I installed Cocoa Browser Air at home from the same installation file (for 2.4.1) that works fine at work. Its info for Mac OS X 10.6 looks OK, but there's nothing under either iPhone 3.1 or 3.2. I've installed the appropriate Documentation Sets in Xcode Preferences-Documentation, and I have an iPhone SDK, which is required to refer to iPhone DocSets. I'm using the Xcode version 3.2.2. Thanks.

    Read the article

  • how to have publishing, blog and wiki features together?

    - by George2
    Hello everyone, I am using SharePoint 2007 Enterprise + Publishing portal template + Windows Server 2008. I want to have blog and wiki features as well as publishing portal features. Any ideas how to integrate publishing portal, blog and wiki? For integrate, I mean using the same user name and password to pass through authentication of publishing portal, blog and wiki. And should I setup 3 different site collections for publishing portal, blog and wiki (I find if I setup publishing portal site collection, I can not create blog and wiki sub-site)? thanks in advance, George

    Read the article

  • How do game companies handle programming for multiple platforms?

    - by stormist
    You often see that a new game will be released on Xbox 360, PS3 and Windows PC. How do gaming companies do this? Is it a common source code compiled using different compilers? Are actual different source codes required? example news article announcing this: http://www.gameranx.com/updates/id/502/article/dungeon-siege-3-announced-to-be-developed-by-obsidian/

    Read the article

  • AIX 7.1 su root password bug?

    - by exxoid
    In our AIX 7.1 machine there is a weird bug we've ran into.. If you are logged into the AIX box via SSH as a regular user and you try to su - you get prompted for the password, lets say our password is "P@$$w0rd23", you can type "P@$$w0rd2ANYTHING" and it will still grant you root. As long as you have "P@$$w0rd2" it will grant you root regardless of what else you specify in the authentication and even though the actual password is "P@$$w0rd23". This seems to be a bug? Anyone see anything like this before? Thanks.

    Read the article

  • Can arbitrary email addresses be stored in AD userPrincipalName?

    - by Rob Potter
    I have a web app that is front-ended by ISA, natively authenticating against AD. All users currently log on with sAMAccountName. I would like to allow users to provide a personal email address and be able to authenticate against this instead. From what I understand the AD userPrincipalName is typically used for an internally generated logon name, which by convention, is often their internally generated email address. The web app that I have is web scale (circa 3 million accounts*) and not an internal, corporate app, so the email addresses will be from diverse domains. Can I just set the AD userPrincipalName attribute to the user's email address, and then will ISA natively authenticate against this attribute instead? I heard rumours of AD having a maximum number of domain suffixes that it allows in AD userPrincipalName...? (presumably it catalogues them). [*I realise that AD is not the ideal authentication directory for a user population of this scale.]

    Read the article

  • Encrypt temporary password using public ssh key

    - by David M. Syzdek
    I manage a virtual office and our staff uses both SSH keys and passwords for authentication. If one of our staff forgets his password, is there a way to encrypt a temporary password using his public RSA ssh key so I can send it to him via e-mail? I've seen other questions related to this one, however the "answers" generally recommend against using the public/private SSH keys to perform general encryption/decryption and do not actually state if this is possible. I would like to know if it is indeed possible and what are the steps to encrypt and then decrypt the password.

    Read the article

  • How to setup Hessian Kit in iPhone existing projects

    - by Shikhar
    Hello Can any one help me to find out, how I can setup Hessian Kit on existing iPhone project. What are the steps required to run a simple hello world program. I have Hessian Kit (http://sourceforge.net/projects/hessiankit/) but don't know how I can include this in my existing project. Please help Thanks SD

    Read the article

  • Storing and managing video files

    - by Ajay
    What approach is considered to be the best to store and manage video files? As databases are used for small textual data, are databases good enough to handle huge amounts of video/audio data? Are databases, the formidable solution? Apart from size of hard disk space required for centrally managing video/audio/image content, what are the requirements of hosting such a server?

    Read the article

  • jQuery function execute on Button Click and Enter/Return (key)

    - by Alvin Jones
    I'm trying to create a little search box that allows you to search Twitter based on the keyword you enter in the input field. While it's work, it only works if you press the Submit button. I would also like to be able to press the Enter or Return key to initiate the search. I've tried using the .sumbit function and wrapping my input around a form element with no success. Any insight would be greatly appreciate! Live example: http://tinyurl.com/84axyym <script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js"></script> <script> $(document).ready(function(){ function(data) { $('#startSearch').click(function(){ $('#tweets .results').remove(); var searchTerm = 'http://search.twitter.com/search.json?q=' + $('#twitterSearch').val() + '&callback=?' $.getJSON(searchTerm, function(data) { $.each(data.results, function() { $('<div class="results"></div>') .hide() .append('<a class="userPicLink" href="http://twitter.com/' + this.from_user + '">' + '<img class="userImg" src="' + this.profile_image_url + '">' + '</a>') .append('<span class="userName">' + '<a href="http://twitter.com/' + this.from_user + '">' + this.from_user + '</span>') .append('<span class="userText">' + this.text + '</span>') .append('<time class="textTime">' + relTime(this.created_at) + '</time>') .appendTo('#tweets') .fadeIn(); }); }); </script> <body> <label id="searchLabel" for="twitterSearch">Search</label> <input type="search" list="searchSugg" id="twitterSearch" placeholder="css3 animation" required aria-required="true"> <input id="startSearch" type="submit"> <datalist id="searchSugg"> <option value="css3 mulitple backgrounds"> <option value="html5 video"> <option value="responsive web design"> <option value="twitter api"> </datalist> <div id="tweets"> </div> </body>

    Read the article

  • Window 2003 Server - Logon Failure error message in Event Viewer

    - by user45192
    Hi guys, I received alot of event logged in the event viewer with this message. I notice is always the same user id which encounters this error. The user id is use by an application to access the database. However, this account does not exits on this server. How do I trace the services/program use by this user id which causes these error messages? Reason=Unknown user name or bad password&&User Name=&&Domain=&&Logon Type=3&&Logon Process=NtLmSsp&&Authentication Package=NTLM&&Workstation Name=&&Caller User Name=-&&Caller Domain=-&&Caller Logon ID=-&&Caller Process ID=-&&Transited Services=-&&Source Network Address=-&&Source Port=-&&User=SYSTEM&&ComputerName=

    Read the article

  • Samba domain trust errors on a specific interface

    - by John K
    We have a windows domain that also has RHEL member servers in it. All the servers have a primary network connection to the LAN, but some servers also have private dedicated links to one of our RHEL servers, which serves as a head to our SAN storage. This particular server is running Samba 3.5.15, and is running in domain authentication mode. Users can access shares on this server without a problem over the LAN connection from our Windows servers, but if a user tries to access the shares over a private link (i.e. a 192.168.1.2 address to the RHEL server) users get an error "The trust relationship between this workstation and the primary domain failed."

    Read the article

  • Why do I get a Warning and a Fatal error when I use ../ ?

    - by aliov
    When I use ../mysqlConnect.php I get the following messages. Warning: require_once(../mysqlConnect.php) [function.require-once]: failed to open stream: No such file or directory in /home/content/etc... Fatal error: require_once() [function.require]: Failed opening required '../mysqlConnect.php' (include_path='.:/usr/local/php5/lib/php') in /home/content/etc... When I use the directory name - mydir/mysqlConnect.php - everything works fine.

    Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >