Search Results

Search found 9154 results on 367 pages for 'replication jobs job'.

Page 296/367 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

  • Cannot boot into system after deleting partition

    - by Clayton
    Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

    Read the article

  • SharePoint Navigation - Setting the Audience Property of an SPNavigationNode

    - by jhallal
    In this tip/trick i will demonstrate a way of setting by code the target audience of an SP navigation node.You might say setting this property in SharePoint UI is quite simple, but if you want to set it by code you will not find any straight forward property or method out of the box in SharePoint Object Model that does the job. The SPNavigationNode class has a property called “Properties”, which allows us to add custom properties to the node. One of the Property is “Audience”, which is used for setting the target audience on the navigation node. using (SPSite site = new SPSite("URL of your SharePoint Site")) {                using (SPWeb web = site.OpenWeb())         {             SPNavigationNode navNode = web.Navigation.GlobalNodes[0];              if (navNode.Properties.Contains("Audience"))             {                 navNode.Properties["Audience"] = "Users or Groups";             }             else             {                 navNode.Properties.Add("Audience", "Users or Groups");             }             navNode.Update();         } }

    Read the article

  • Sign up Today for User Feedback Sessions at Oracle OpenWorld and JavaOne 2012

    - by Lionel Dubreuil
    You’re Invited to Sign Up for Oracle Usability Feedback Sessions SIGN UP TODAY to get the most from your conference experience by participating in a usability feedback session where your expertise will help Oracle develop outstanding products and solutions. The Oracle User Experience team is conducting a Usability Evaluation on publishing and accessing Oracle Enterprise Repository content when building SOA projects in JDeveloper. We are asking Developers and Architects who build or integrate applications using SOA Suite to take a look at the interaction between JDeveloper with the Enterprise Repository.  We are looking for feedback on the interaction between JDeveloper and Oracle Enterprise Repository so that we may improve the User Interface in a future release. The feedback sessions will be conducted during the Oracle OpenWorld and JavaOne Conferences, at the Intercontinental Hotel in San Francisco, CA. Sessions will last 1 hour and will be held on Monday, October 1 through Wednesday, October 3, 2012. This event fills up quickly, and space is limited. If you are interested in participating, please send an email to gozel.aamoth-AT-oracle-DOT-com with the following information: Identification Name: _________________________________ Company Name:  _________________________ Job Title: Email: Phone Number (work, mobile, include country code): Which conference are you attending? _____Oracle OpenWorld _____JavaOne Have you ever participated in usability activities with Oracle or any of its subsidiaries? ____Yes; specify __________________________________________________ ____No Are you currently using JDeveloper? ____Yes ; specify version(s): _______________________________ ____No How long have you used JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years Are you currently using SOA features in JDeveloper? ____Yes ____No How long have you used SOA features in JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years How often do you use SOA features in JDeveloper? ____ Daily ____ 2 - 3 times a week ____ Once a week  ____ Once a month or less Briefly describe the types of SOA tasks you use JDeveloper to perform: _____________________________________ _____________________________________ Please list your availability If you know your availability; please let me know which day you would prefer to participate, Monday, Tuesday or Wednesday. Limited sessions are available on each day, and each session lasts 1 hour. Thank you for taking the time to complete this questionnaire.  It will help us match you to the best suited feedback session. Once we receive your email, we will contact you to set up a time and day for participation. You'll find more information about our on-site lab on the VoX (Voice of User Experience) blog, and on our Events page at Usable Apps.

    Read the article

  • Sign up Today for User Feedback Sessions at Oracle OpenWorld and JavaOne 2012

    - by Lionel Dubreuil
    You’re Invited to Sign Up for Oracle Usability Feedback Sessions SIGN UP TODAY to get the most from your conference experience by participating in a usability feedback session where your expertise will help Oracle develop outstanding products and solutions. The Oracle User Experience team is conducting a Usability Evaluation on publishing and accessing Oracle Enterprise Repository content when building SOA projects in JDeveloper. We are asking Developers and Architects who build or integrate applications using SOA Suite to take a look at the interaction between JDeveloper with the Enterprise Repository.  We are looking for feedback on the interaction between JDeveloper and Oracle Enterprise Repository so that we may improve the User Interface in a future release. The feedback sessions will be conducted during the Oracle OpenWorld and JavaOne Conferences, at the Intercontinental Hotel in San Francisco, CA. Sessions will last 1 hour and will be held on Monday, October 1 through Wednesday, October 3, 2012. This event fills up quickly, and space is limited. If you are interested in participating, please send an email to [email protected] with the following information: Identification Name: _________________________________ Company Name:  _________________________ Job Title: Email: Phone Number (work, mobile, include country code): Which conference are you attending? _____Oracle OpenWorld _____JavaOne Have you ever participated in usability activities with Oracle or any of its subsidiaries? ____Yes; specify __________________________________________________ ____No Are you currently using JDeveloper? ____Yes ; specify version(s): _______________________________ ____No How long have you used JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years Are you currently using SOA features in JDeveloper? ____Yes ____No How long have you used SOA features in JDeveloper? ____ Less than 1 year ____ 1 - 2 years ____ 3 - 4 years ____ 4 + years How often do you use SOA features in JDeveloper? ____ Daily ____ 2 - 3 times a week ____ Once a week  ____ Once a month or less Briefly describe the types of SOA tasks you use JDeveloper to perform: _____________________________________ _____________________________________ Please list your availability If you know your availability; please let me know which day you would prefer to participate, Monday, Tuesday or Wednesday. Limited sessions are available on each day, and each session lasts 1 hour. Thank you for taking the time to complete this questionnaire.  It will help us match you to the best suited feedback session. Once we receive your email, we will contact you to set up a time and day for participation. You'll find more information about our on-site lab on the VoX (Voice of User Experience) blog, and on our Events page at Usable Apps.

    Read the article

  • MPEG-2 playback inconsistent

    - by DustByte
    Many years ago I gave up on Linux because video playback was choppy. Now I'm back, and video playback is still playing up... I have two MPEG files: good.mpg bad.mpg. Here is some information about the two files, using avprobe: My machine is Intel Core 2 Duo E8400 @ 3.00GHz x 2, 64-bit. I do not know what graphics card I have. I run Ubuntu 12.04. So far I have had no problems with YouTube and playback of various video files, including playback of the file good.mpg, included in the avprobe snapshot above. However, the file bad.mpg gives me headache! The file bad.mpg is produced by a respectable "Old-video-tapes-to-DVD" company. I converted over 10 Video-8 tapes to MPEG through them, and today I collected my hard drive containing the MPEG files. Unfortunately I have problem watching them! Here are some details: Using Totem Movie Player 3.0.1 works well for several seconds, then it gets choppy and the playback is not at all smooth. Also the player easily freezes for a while when trying to jump to another position in the file. Most strangely though, the total time is shown as 0:42 (42 seconds) instead of the true 00:39:11: The VLC media player is doing a better job. It shows the correct total length, but as soon as I jump in the video to a new position, it stalls. Playback also stalls after 30 seconds if I press play and leave it. Using Handbrake and choosing bad.mpg as the source, gives me: There is only one title to choose, and it is 6 min 53 seconds. I would have guessed the full 39 minutes of the video should have shown. Lastly, putting the file bad.mpg in Dropbox and viewing it on my iPad with the Dropbox app seems fine (disregard the lack of easy jumping forward due to real-time encoding when streaming it). My question is simple: What is going on?! Why do I have problem to play the MPEG-2 files I just paid good money for (the issue with bad.mpg applies to all files I had encoded)? Is it an issue with my particular Linux machine? The graphics card? But why has everything worked fine so far, and why does not the good.mpg file cause any problems?

    Read the article

  • Is the Joel Test really a good gauging tool?

    - by henry
    I just learned about the Joel Test. I have been computer programmer for 22 years, but somehow I never heard about it before. I consider my best job so far to be this small investment managing company with 30 employees and only three people in the IT department. I am no longer with them, but I had being working there for five years – my longest streak with any given company. To my surprise they scored extremely poor on the Joel Test. The only two questions I would answer “yes” are #4: Do you have a bug database? And #9: Do you use the best tools money can buy? Everything else is either “sometimes” or straight “no”. Here is what I liked about the company however: Good pay. They bragged about it to my face, and I bragged about it to their face, so it was almost like a family environment. I always knew the big picture. When writing code to solve a particular problem there were no ambiguity about the business nature of that problem. Even though we did not always had written specifications we could ask business users a question anytime, often yelling it across the floor. I could even talk to executives any time I felt like doing it: no appointment necessary. Immediate feedback. Once we implement a solution and make business users happy they immediately let us know that, we (programmers) become heroes of the moment. No red tape. I could always buy any tools I deemed necessary, and design solutions the way my professional judgment dictates. Flexibility. If I had mid-day dental appointment that is near my house rather than near the office, I would send email to the company: "FYI: I work from home today". As long as one of three IT guys was on the floor (to help traders in case their monitors go dark) they did not care where two others were. So the question thus becomes: How valuable is the Joel Test? Why bother with it?

    Read the article

  • Cannot get Virtualbox to install properly on Ubuntu 12.04

    - by lopac1029
    I cannot get Virtualbox to install properly on my 12.04. I first went with a manual install for the .deb from the old builds section of the Virtualbox page. That .deb opened up the Software Center and installed. Then I got the error coming up of VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot. which I can only assume was due to my Ubuntu version being 32-bit (System Details - Overview - OC type: 32-bit, right?) So I followed these instructions to remove the .deb manually, restarted my laptop, and then FOUND the actual Virtualbox install in the Software Center and installed from that (assuming it would give me the correct version I need for my system) So after all that (and then some), I'm still getting the same error when I connect to my new job's project in Virtualbox. Can anyone point me in the right direction of what to do here? This is the first time I've ever worked with Virtualbox, and no one at this company is using Ubuntu, so I'm on my own here. EDIT: Here is the direct info from running the 2 suggested commands Inspiron-1750-brick:~ $lscpu Architecture: i686 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 23 Stepping: 10 CPU MHz: 2100.000 BogoMIPS: 4189.45 L1d cache: 32K L1i cache: 32K L2 cache: 2048K Inspiron-1750-brick:~ $cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.80 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz stepping : 10 microcode : 0xa07 cpu MHz : 1200.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm dtherm bogomips : 4189.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

    Read the article

  • Apprentice Boot Camp in South Africa (Part 1)

    - by Tim Koekkoek
    By Maximilian Michel (DE), Jorge Garnacho (ES), Daniel Maull (UK), Adam Griffiths (UK), Guillermo De Las Nieves (ES), Catriona McGill (UK), Ed Dunlop (UK) The Boot Camp in South Africa was an amazing experience for all of us. The minute we landed, we were made to feel at home from our host Patrick Fitzgerald. The whole family who run the Guest House were also very friendly and always keen to help us. Since we had people from South Africa to show us all the amazing sights and their traditional ways to live their lives, the two weeks were very enjoyable for all of us and we came much closer together as a group. You can read this in the following parts of this report. Enjoy! The first group of Apprentices in Oracle (from left to right): Maximilian Michel (DE), Jorge Garnacho (ES), Daniel Maull (UK), Adam Griffiths (UK), Guillermo De Las Nieves (ES), Catriona McGill (UK), Ed Dunlop (UK) The Training Well, it’s time to talk about the main purpose of our trip to South Africa: the training. Two weeks, two courses. Servers and Storage. Two weeks to learn as much as possible and get the certificate. First week: Eben Pretorius with Servers Boot Camp. Learning about: • Machines: T1000, T2000, T3, T4, M series; • How to connect to the machines: serial and network connections; • Levels of software: ALOM, ILOM, OBP and of course the operating system, Solaris Combined with the practical part (screwdriver in one hand, and antistatic wristband on the other) makes quite a lot of stuff! But fortunately, Eben was able to tell us about everything without making our brains explode. For the second week: Storage Boot Camp with Deon Van Vuuren. Taking a look at the content: • Storage machines; • Connectors and protocols: SCSi, SAS, SATA Fiber Channel. Again, huge amounts of information, but Deon definitely did a great job and helped us learn it all. At the end, there was just one question left. Were we able to pass the exam and get the certificate? Well, what can we say? Just take a closer look at the picture above and make your conclusions! Our lovely Oracle office in Woodmead (near Johannesburg) We are all very proud to receive certification in “Server and Storage Support Fundamentals” together with our trainer Deon Van Vuuren. In summary, in case that you don't remember any of the above, the allies for a field engineer are: • System Handbook • EIS-DVD • A proper toolkit With these tools by our side, we’ll be unbeatable!  In the next article later this week, you can find part 2 of our experiences!

    Read the article

  • Coping with infrastructure upgrades

    - by Fatherjack
    A common topic for questions on SQL Server forums is how to plan and implement upgrades to SQL Server. Moving from old to new hardware or moving from one version of SQL Server to another. There are other circumstances where upgrades of other systems affect SQL Server DBAs. For example, where I work at the moment there is an Microsoft Exchange (email) server upgrade in progress. It it being handled by a different team so I’m not wholly sure on the details but we are in a situation where there are currently 2 Exchange email servers – the old one and the new one. Users mail boxes are being transferred in a planned process but as we approach the old server being turned off we have to also make sure that our SQL Servers get updated to use the new SMTP server for all of the SQL Agent notifications, SSIS packages etc. My servers have a number of profiles so that various jobs can send emails on behalf of various departments and different systems. This means there are lots of places that the old server name needs to be replaced by the new one. Anyone who has set up DBMail and enjoyed the click-tastic odyssey of screens to create Profiles and Accounts and so on and so forth ought to seek some professional help in my opinion. It’s a nightmare of back and forth settings changes and it stinks. I wasn’t looking forward to heading into this mess of a UI and changing the old Exchange server name for the new one on all my SQL Instances for all of the accounts I have set up. So I did what any Englishmen with a shed would do, I decided to take it apart and see if I can fix it another way. I took a guess that we are going to be working in MSDB and Books OnLine was remarkably helpful and amongst a lot of information told me about a couple of procedures that can be used to interrogate DBMail settings. USE [msdb] -- It's where all the good stuff is kept GO EXEC dbo.sysmail_help_profile_sp; EXEC dbo.sysmail_help_account_sp; Both of these procedures take optional parameters with the same name – ID and Name. If you provide an ID or a name then the results you get back are for that specific Profile or Account. Otherwise you get details of all Profiles and Accounts on the server you are connected to. As you can see (click for a bigger image), the Account has the SMTP server information in the servername column. We want to change that value to NewSMTP.Contoso.com. Now it appears that the procedure we are looking at gets it’s data from the sysmail_account and sysmail_server tables, you can get the results the stored procedure provides if you run the code below. SELECT [account_id] , [name] , [description] , [email_address] , [display_name] , [replyto_address] , [last_mod_datetime] , [last_mod_user] FROM dbo.sysmail_account AS sa; SELECT [account_id] , [servertype] , [servername] , [port] , [username] , [credential_id] , [use_default_credentials] , [enable_ssl] , [flags] , [last_mod_datetime] , [last_mod_user] , [timeout] FROM dbo.sysmail_server AS sms Now, we have no real idea how these tables are linked and whether making an update direct to one or other of them is going to do what we want or whether it will entirely cripple our ability to send email from SQL Server so we wont touch those tables with any UPDATE TSQL. So, back to Books OnLine then and we find sysmail_update_account_sp. It’s exactly what we need. The examples in BOL take the form (as below) of having every parameter explicitly defined. Not wanting to totally obliterate the existing values by not passing values in all of the parameters I set to writing some code to gather the existing data from the tables and re-write the SMTP server name and then execute the resulting TSQL. IF OBJECT_ID('tempdb..#sysmailprofiles') IS NOT NULL DROP TABLE #sysmailprofiles GO CREATE TABLE #sysmailprofiles ( account_id INT , [name] VARCHAR(50) , [description] VARCHAR(500) , email_address VARCHAR(500) , display_name VARCHAR(500) , replyto_address VARCHAR(500) , servertype VARCHAR(10) , servername VARCHAR(100) , port INT , username VARCHAR(100) , use_default_credentials VARCHAR(1) , ENABLE_ssl VARCHAR(1) ) INSERT [#sysmailprofiles] ( [account_id] , [name] , [description] , [email_address] , [display_name] , [replyto_address] , [servertype] , [servername] , [port] , [username] , [use_default_credentials] , [ENABLE_ssl] ) EXEC [dbo].[sysmail_help_account_sp] DECLARE @TSQL NVARCHAR(1000) SELECT TOP 1 @TSQL = 'EXEC [dbo].[sysmail_update_account_sp] @account_id = ' + CAST([s].[account_id] AS VARCHAR(20)) + ', @account_name = ''' + [s].[name] + '''' + ', @email_address = N''' + [s].[email_address] + '''' + ', @display_name = N''' + [s].[display_name] + '''' + ', @replyto_address = N''' + s.replyto_address + '''' + ', @description = N''' + [s].[description] + '''' + ', @mailserver_name = ''NEWSMTP.contoso.com''' + +', @mailserver_type = ' + [s].[servertype] + ', @port = ' + CAST([s].[port] AS VARCHAR(20)) + ', @username = ' + COALESCE([s].[username], '''''') + ', @use_default_credentials =' + CAST(s.[use_default_credentials] AS VARCHAR(1)) + ', @enable_ssl =' + [s].[ENABLE_ssl] FROM [#sysmailprofiles] AS s WHERE [s].[servername] = 'SMTP.Contoso.com' SELECT @tsql EXEC [sys].[sp_executesql] @tsql This worked well for me and testing the email function EXEC dbo.sp_send_dbmail afterwards showed that the settings were indeed using our new Exchange server. It was only later in writing this blog that I tried running the sysmail_update_account_sp procedure with only the SMTP server name parameter value specified. Despite what Books OnLine might intimate, you can do this and only the values for parameters specified get changed. If a parameter is not specified in the execution of the procedure then the values remain unchanged. This renders most of the above script unnecessary as I could have simply specified the account_id that I want to amend and the new value for the parameter I want to update. EXEC sysmail_update_account_sp @account_id = 1, @mailserver_name = 'NEWSMTP.Contoso.com' This wasn’t going to be the main reason for this post, it was meant to describe how to capture values from a stored procedure and use them in dynamic TSQL but instead we are here and (re)learning the fact that Books Online is a little flawed in places. It is a fantastic resource for anyone working with SQL Server but the reader must adopt an enquiring frame of mind and use a little curiosity to try simple variations on examples to fully understand the code you are working with. I think the author(s) of this part of Books OnLine missed an opportunity to include a third example that had fewer than all parameters specified to give a lead to this method existing.

    Read the article

  • Alternatives for comparing data from different databases

    - by Alex
    I have two huge tables on separate databases. One of them has the information of all the SMS that passed through the company's servers while the other one has the information of the actual billing of those SMS. My job is to compare samples of both of these tables (for example, the records between 1 and 2 pm) to see if there are any differences: SMS that were sent but not charged to the user for whatever reason that may be happening. The columns I will be using to compare are the remitent's phone number and the exact date the SMS was sent. An issue here is that dates usually are the same on both sides, but in many cases differ by 1 or 2 seconds. I have, so far, two alternatives to do this: (PL/SQL) Create two tables where i'm going to temporarily store all the records of that 1hour sample. One for each of the main tables. Then, for each distinct phone number, select the time of every SMS sent from that phone from both my temporary tables and start comparing one by one using cursors. In this case, the procedure would be ran on the server where one of the sources is so the contents of the other one would be looked up using a dblink. (sqlplus + c++) Instead of storing the 1hour samples in new tables, output the query to a text file. I will have two text files, one for each source. Then, open the first file and load all of it's content on a hash_map (key-value) using c++, where the key will be the phone number and the value a list of times of SMS sent from that phone. Finally, open the second file, grab each line (in this format: numberX timeX), look for numberX's entry on the hash_map (wich will be a list of times) and then check if timeX is on that list. If it isn't, save it somewhere to finally store it on a "uncharged" table (this would also be the final step on case 1) My main concern is efficiency. These samples have about 2 million records on each source, so just grabbing one record on one side and looking it up on the other would not be possible. That's the reason I wanted to use hash_maps Which do you think is a better option?

    Read the article

  • Sabre Manages Fast Data Growth with Oracle Data Integration Products

    - by Irem Radzik
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Last year at OpenWorld we announced Sabre Holding as a winner of the Fusion Middleware Innovation Awards. The Sabre team did an excellent job at leveraging cutting edge technologies for managing rapid data growth and exponential scalability demands they have experienced in the travel industry. Today we announced the details and specific benefits of Sabre’s new real-time data integration solution in a press release. Please take a look if you haven’t seen it yet. Sabre Holdings Deploys Oracle Data Integrator and Oracle GoldenGate to Support Rapid Customer Growth There are 3 different areas of benefits Sabre achieved by using Oracle Data Integration products: Manages 7X increase in data sources for the enterprise data warehouse Reduced infrastructure complexity Decreased time to market for new products and services by 30 percent. This simply shows that using latest technologies helps the companies to innovate robust solutions against today’s key data management challenges. And the benefit of using a next generation data integration technology is not only seen in the IT operations, but also in the business side. A better data integration solution for the enterprise data warehouse delivered the platform they need to accelerate how they service their customers, improving their competitive advantage. Tomorrow I will give another great example of innovation with next generation data integration from Oracle. We will be discussing the Fusion Middleware Innovation Awards 2012 winners and their results with using Oracle’s data integration products.

    Read the article

  • Visual WebGui's XAML based programming for web developers

    - by Webgui
    While ASP.NET provides an event base approach it is completely dismissed when working with AJAX and the richness of the server is lost and replaced with JavaScript programming and couple with a very high security risk. Visual WebGui reinstates the power of the server to AJAX development and provides a statefull yet scalable, server centric architecture that provides the benefits and user productivity of AJAX with the security and developer productivity we had before AJAX stormed into our lives. "When I first came up with the concept of Visual WebGui , I was frustrated by the fragile and complex nature of developing web applications. The contrast in productivity between working in a fully OOP compiled environment vs. scripting even today, with JQuery, Dojo and such, is still huge. Even today the greatest sponsor of JavaScript programming, Google, is offering a framework to avoid JavaScript using Java that compiles to JavaScript (GWT). So I decided to find a way to abstract the complexity or rather delegate the complex job to enable developers to concentrate on the “What” instead of the “How” and embraced the Form based approach," said Guy Peled the inventor of Visual WebGui. Although traditional OOP development still rules the enterprise, the differences between web sites and web applications have blurred and so did the differences between classic developers and web developers. As a result, we now see declarative languages in desktop / backend development environments (WPF / WF) and we see OOP, gaining more and more power in web development (ASP.NET MVC / ASP.NET DOM). However, what has not changed is enterprise need for security, development ROI, reach, highly responsive and interactive UIs and scalability. The advantages that declarative languages and 'on demand' compilation provide over classic development are mostly the flexibility and a more readable initialize component it offers which is what Gizmox is aspiring to do by replacing the designer initialize component with XAML code. The code in this new project template will be compiled on demand using the build provider mechanism ASP.NET has. This means that the performance hit is only on the first request and after that the performance is the same as a prebuilt solution. This will allow the flexibility of a dynamically updated sites and the power of fully blown enterprise applications over web. You can also use prebuilt features available in ASP.NET to enjoy both worlds in production. VWG XAML implementation (VWG Sites) will be the first truly compliable XAML implementation as Microsoft implemented Silverlight and WPF as a runtime markup interpretation opposed to the ASP.NET markup implementation which is compiled to CLR code once. We have chosen to implement the VWG Sites parser as a different way to create CLR code that provides greater performance over the reflection alternative. VWG Sites will also be the first server side XAML UI engine which, while giving the power of XAML, it will not require any plug-ins or installations on the client side. Short demo video of VWG Sites markup. There is also a live sample available here.

    Read the article

  • links for 2010-12-22

    - by Bob Rhubart
    @hajonormann: BPM: Top Seven Architectural Topics in 2010 Oracle ACE Director Hajo Normann offers details on how to design a BPM/SOA solution including: modeling human interaction, improving BPM models, orchestrating composed services, central task management, new approaches for business-IT alignment, solutions for non-deterministic processes, and choreography. (tags: oracle otn soasymposium infoq soa bpm) InfoQ: Simplicity, The Way of the Unusual Architect Dan North talks about the tendency developers-becoming-architects have to create bigger and more complex systems. Without trying to be simplistic, North argues for simplicity, offering strategies to extract the simple essence from complex situations. (tags: ping.fm) Fun with Sun Ray, 3D, Oracle VM x86 and SRIOV (Wim Coekaerts Blog) "One of the things I like about my job is that I get to play around with stuff and make use of the technologies we work on in my teams. Sort of my own little playground." - Wim Coekaerts (tags: oracle otn virtualization oraclevm) Oracle VM VirtualBox 4.0.0 Released! (Oracle's Virtualization Blog) And you were worried about what to get that special someone for Christmas... (tags: oracle otn virtualization virtualbox) Virtual Developer Day: Oracle WebLogic Server & Java EE (#OTNVDD) (Oracle Technology Network Blog (aka TechBlog)) "Virtual Developer Day is back with a vengeance! On Feb. 1, login to learn how Oracle WebLogic Server enables a whole new level of productivity for enterprise developers." Registration is open. (tags: oracle otn events webinar java) New Coherence 3.6 Oracle University Course (Cristóbal Soto's Blog) Cristóbal Soto shares information on the "Oracle Coherence 3.6: Share and Manage Data in Clusters" course now available through Oracle University. (tags: oracle otn grid coherence) The Aquarium: Oracle WebLogic Server & Java EE developer day "Oracle WebLogic is well on its way to contribute to the general Java EE 6 momentum and the OTN Blog has just announced a Virtual Developer Day for Oracle WebLogic." (tags: oracle otn weblogic java) Enterprise 2.0 Use Cases for Semantic Web (Reiser 2.0) "How can an enterprise improve the efficiency and effectiveness of their Knowledge and Community model leveraging semantic technologies and social networking dynamics?" - Peter Reiser (tags: oracle otn enterprise2.0 semanticweb) John Gøtze: European Interoperability Framework 2.0 "This week, the European Commission announced an updated interoperability policy in the EU. The Commission has committed itself to adopt a Communication that introduces the European Interoperability Strategy (EIS) and an update to the European Interoperability Framework (EIF)..." - John Gøtze (tags: entarch Interoperability) Andy Mulholland: Maybe Web 3.0 is quite understandable – and a natural result "The idea of Web 1.0 = content, Web 2.0 = people and Web 3.0 = services has a nice symmetrical feel to it, in fact it feels basically right as such a definition would include the two other major definitions as well. So if we put these things all together what picture do we see?" - Andy Mulholland (tags: web2.0 web3.0) Ken Downs: A Working Definition of Business Logic, with Implications for CRUD Code "The Wikipedia entry on 'Business Logic' has a wonderfully honest opening sentence stating that 'Business logic, or domain logic, is a non-technical term...'"  (tags: businesslogic crud)

    Read the article

  • Disaster, or Migration?

    - by Rob Farley
    This post is in two parts – technical and personal. And I should point out that it’s prompted in part by this month’s T-SQL Tuesday, hosted by Allen Kinsel. First, the technical: I’ve had a few conversations with people recently about migration – moving a SQL Server database from one box to another (sometimes, but not primarily, involving an upgrade). One question that tends to come up is that of downtime. Obviously there will be some period of time between the old server being available and the new one. The way that most people seem to think of migration is this: Build a new server. Stop people from using the old server. Take a backup of the old server Restore it on the new server. Reconfigure the client applications (or alternatively, configure the new server to use the same address as the old) Make the new server online. There are other things involved, such as testing, of course. But this is essentially the process that people tell me they’re planning to follow. The bit that I want to look at today (as you’ve probably guessed from my title) is the “backup and restore” section. If a SQL database is using the Simple Recovery Model, then the only restore option is the last database backup. This backup could be full or differential. The transaction log never gets backed up in the Simple Recovery Model. Instead, it truncates regularly to stay small. One that’s using the Full Recovery Model (or Bulk-Logged) won’t truncate its log – the log must be backed up regularly. This provides the benefit of having a lot more option available for restores. It’s a requirement for most systems of High Availability, because if you’re making sure that a spare box is up-and-running, ready to take over, then you have to be interested in the logs that are happening on the current box, rather than truncating them all the time. A High Availability system such as Mirroring, Replication or Log Shipping will initialise the spare machine by restoring a full database backup (and maybe a differential backup if available), and then any subsequent log backups. Once the secondary copy is close, transactions can be applied to keep the two in sync. The main aspect of any High Availability system is to have a redundant system that is ready to take over. So the similarity for migration should be obvious. If you need to move a database from one box to another, then introducing a High Availability mechanism can help. By turning on the Full Recovery Model and then taking a backup (so that the now-interesting logs have some context), logs start being kept, and are therefore available for getting the new box ready (even if it’s an upgraded version). When the migration is ready to occur, a failover can be done, letting the new server take over the responsibility of the old, just as if a disaster had happened. Except that this is a planned failover, not a disaster at all. There’s a fine line between a disaster and a migration. Failovers can be useful in patching, upgrading, maintenance, and more. Hopefully, even an unexpected disaster can be seen as just another failover, and there can be an opportunity there – perhaps to get some work done on the principal server to increase robustness. And if I’ve just set up a High Availability system for even the simplest of databases, it’s not necessarily a bad thing. :) So now the personal: It’s been an interesting time recently... June has been somewhat odd. A court case with which I was involved got resolved (through mediation). I can’t go into details, but my lawyers tell me that I’m allowed to say how I feel about it. The answer is ‘lousy’. I don’t regret pursuing it as long as I did – but in the end I had to make a decision regarding the commerciality of letting it continue, and I’m going to look forward to the days when the kind of money I spent on my lawyers is small change. Mind you, if I had a similar situation with an employer, I’d do the same again, but that doesn’t really stop me feeling frustrated about it. The following day I had to fly to country Victoria to see my grandmother, who wasn’t expected to last the weekend. She’s still around a week later as I write this, but her 92-year-old body has basically given up on her. She’s been a Christian all her life, and is looking forward to eternity. We’ll all miss her though, and it’s hard to see my family grieving. Then on Tuesday, I was driving back to the airport with my family to come home, when something really bizarre happened. We were travelling down the freeway, just pulled out to go past a truck (farm-truck sized, not a semi-trailer), when a car-sized mass of metal fell off it. It was something like an industrial air-conditioner, but from where I was sitting, it was just a mass of spinning metal, like something out of a movie (one friend described it as “holidays by Michael Bay”). Somehow, and I’m really don’t know how, the part of it nearest us bounced high enough to clear the car, and there wasn’t even a scratch. We pulled over the check, and I was just thanking God that we’d changed lanes when we had, and that we remained unharmed. I had all kinds of thoughts about what could’ve happened if we’d had something that size land on the windscreen... All this has drilled home that while I feel that I haven’t provided as well for the family as I could’ve done (like by pursuing an expensive legal case), I shouldn’t even consider that I have proper control over things. I get to live life, and make decisions based on what I feel is right at the time. But I’m not going to get everything right, and there will be things that feel like disasters, some which could’ve been in my control and some which are very much beyond my control. The case feels like something I could’ve pursued differently, a disaster that could’ve been avoided in some way. Gran dying is lousy of course. An accident on the freeway would have been awful. I need to recognise that the worst disasters are ones that I can’t affect, and that I need to look at things in context – perhaps seeing everything that happens as a migration instead. Life is never the same from one day to the next. Every event has a before and an after – sometimes it’s clearly positive, sometimes it’s not. I remember good events in my life (such as my wedding), and bad (such as the loss of my father when I was ten, or the back injury I had eight years ago). I’m not suggesting that I know how to view everything from the “God works all things for good” perspective, but I am trying to look at last week as a migration of sorts. Those things are behind me now, and the future is in God’s hands. Hopefully I’ve learned things, and will be able to live accordingly. I’ve come through this time now, and even though I’ll miss Gran, I’ll see her again one day, and the future is bright.

    Read the article

  • Make Browsing Safer for Children in Google Chrome

    - by Asian Angel
    If you are worried about the websites that your children could accidentally visit while browsing, then you may want to have a look at the Kid Safe – LinkExtend extension for Google Chrome. Kid Safe – LinkExtend in Action Before going any further you may want to have a quick look at the options. Everything is enabled by default but it is recommended that you disable the “Allow entering unsafe sites Option”. For our first example we visited “chatroulette.com”. As you can see in the screenshot WOT and McAfee SiteAdvisor gave the website a “green rating” but when it came specifically to its’ level of appropriateness for children LinkExtend gave it a “yellow rating”. Our second example was “hotbabes.com”…obviously not a good website for any child to visit. You can see that the entire window area has been totally “blacked out” and the available information for this site from each of the six ratings sources. The “Toolbar Button” is also displaying a “red rating”… Notice the two links at the bottom of the ratings screen…both will be visible if the “Allow entering unsafe sites Option” is not disabled (see Options above). You can see the difference for the links at the bottom of the ratings screen if you have the “Allow entering unsafe sites Option” disabled. Definitely much much better… Clicking on the “Find Kids Sites Link” will navigate the tab to the Yahoo! Kids website. The extension will also place “ratings buttons” beside search results at Google. As you can see in the screenshot below not all of the results had information available for them at this time. But it is certainly a lot better than nothing at all when it comes to keeping your children safe. A close-up look at the ratings for one of the search results. Conclusion While no browser add-in makes for a perfect solution the Kid Safe – LinkExtend extension will definitely be a helpful addition to your family’s Chrome browser. Links Download the Kid Safe – LinkExtend extension (Google Chrome Extensions) Similar Articles Productive Geek Tips How to Make Google Chrome Your Default BrowserAccess Browsing History in Google Chrome the Easy WayFocused New Tabs Quick-Fix for Google ChromeVisually Browse Through Your Open Tabs in Google ChromeSubscribe to RSS Feeds in Chrome with a Single Click TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

  • Remove Clutter from the Opera Speed Dial Page

    - by Asian Angel
    Do you want to clean up the Speed Dial page in Opera so that only the thumbnails are visible? Today we show you a couple of tweaks that will make it happen. Speed Dial Page The search bar and text at the bottom take up room and add clutter to the look and feel of Opera’s Speed Dial page. Changing the Settings Two small tweaks to the config settings will clean it all up. To get started type opera:config into the address bar and press enter. Type “speed” into the quick find bar and look for the Speed Dial State entry. Change the 1 to 2 and click save. You will see the following message concerning the changes…click OK. Next type “search” into the quick find bar and look for the Speed Dial Search Type entry. Remove all of the text in the blank and click save. Once again you will see a message about the latest change that you have made. At this point you may need to restart Opera for both changes to take full effect. There will be a noticeable difference in how the Speed Dial page looks afterwards and is much cleaner without the Search bar and text field. You will also still be able to access the right click context menu just like before. Conclusion If you have been looking to get a cleaner and less cluttered Speed Dial page in Opera, then these two little hacks will get the job done! Similar Articles Productive Geek Tips Set the Speed Dial as the Opera Startup PageReplace Google Chrome’s New Tab Page with Speed DialSpeed up Windows Vista Start Menu Search By Limiting ResultsBlank New Tab Quick-Fix for Google ChromeMonitor and Control Memory Usage in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Backup Outlook 2010 Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone

    Read the article

  • SQL SERVER – Backup SQL databases to Box or SkyDrive

    - by Pinal Dave
    To ensure your SQL Server or Azure databases remain safe, you should backup your databases periodically. And it is important to store the backups in a reliable location. Microsoft SkyDrive currently offers 7GB free, Box offers 5GB free – both are reliable and it is simple to send your backups there. SQLBackupAndFTP in it’s latest version 9 added the option to backup to SkyDrive and Box ( in addition to local/network folder, NAS drive, FTP, Dropbox, Google Drive and Amazon S3). Just select the databases that you’d like to backup and select to store the backups in SkyDrive or Box. Below I will show you how to do it in details Select databases to backup First connect to your SQL Server or Azure Sql Database. Then select the databases you’d like to backup. Connect to SkyDrive or Box cloud If you have a free version of SQLBackupAndFTP Box destination is included, but SkyDrive destination will be disabled as it is available in the Standard version or above. Click “Try now” to get 30 days trial on all options On the “SkyDrive Settings” form you’ll need to authorize SQLBackupAndFTP to access your SkyDrive. Click “Authorize…” to open SkyDrive authorization page in your browser, sign in your to SkyDrive account and click at “Allow” . On the next page you will see the field with authorization code. Copy it to the clipboard. Box operation is just the same. After that return to SQLBackupAndFTP, paste the authorization code and click “OK” . After you are authorized, you can enter the path to a backup folder. SQLBackupAndFTP will create the folder if it does not exist. That’s all what has to be done to backup to SkyDrive or Box cloud.  You can now click on “Run Now” button to test this job. Conclusion Whatever is your preference for storing SQL backups, it is easy with SQLBackupAndFTP. Note that at the time of this writing they are running a very rare promotion on volume licenses: 5–9 licenses: 20% off 10–19 licenses: 35% off more than 20 licenses: 50% off Please let me know your favorite options for storing the backups. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Appointment & Booking Calendar for 2,500 Members

    - by D. K. Mason
    For this job I need a booking or appointment calendar for the WP website, so that each of the 2500+ members can manage his/her own appointments calendar. Members will set their schedules and available hours. Buyers can select one member, and book when they want to visit the member and reserve time online. Lets say our WP membership site has thousands of members each offering one service. We have 25 categories. On their profile page is his appointment or booking calendar, along with his personally created and uploaded (into S3) profile video. Website visitors should be able to easily book hours & days as desired. For now all members have a free membership. WE earn $ by bringing customers to the registered members and collecting one dollar for our service. Therefore, we need an affordable script and one that handles our members needs. We already have a paid copy of Jrox. What are those needs? Well, please register for a test account in the ENTERTAINMENT category at http://asianhighway26.com/?page_id=140 Next, pretend you are a buyer and start on the index page and select your ENTERTAINMENT category. Click on image #3 and you will receive a list of others in your traveling area. When you click VIEW DETAILS, there is where a potential customer will see the calendar and if you are available on the dates and times you are interested in doing business. We know that YOU the member will want to list your not available dates and hours. There may be other features desired but this is the most important, we believe. Our WP administrator (me) can install the main script, but each member must have some login or dashboard to manage his/her own calendar and work hours. Can you create or modify any appointment calendar software to do this? Can the jam.jrox.com software we own do this? As you can see here, we offer to pay for ideas you present that we use: asianhighway26.com/?page_id=126 D.K. Mason Chief Development Officer, Asian Highway Network, Tourism Division, Asia-Pacific Region (http://www.forums.doctormason.us/b-ah/)

    Read the article

  • Common SOA Problems by C2B2

    - by JuergenKress
    SOA stands for Service Oriented Architecture and has only really come together as a concrete approach in the last 15 years or so, although the concepts involved have been around for longer. Oracle SOA Suite is based around the Service Component Architecture (SCA) devised by the Open SOA collaboration of companies including Oracle and IBM. SCA, as used in SOA suite, is designed as a way to crystallise the concepts of SOA into a standard which ensures that SOA principles like the separation of application and business logic are maintained. Orchestration or Integration? A common thing to see with many people who are beginning to either build a new SOA based infrastructure, or move an old system to be service oriented, is confusion in the purpose of SOA technologies like BPEL and enterprise service buses. For a lot of problems, orchestration tools like BPEL or integration tools like an ESB will both do the job and achieve the right objectives; however it’s important to remember that, although a hammer can be used to drive a screw into wood, that doesn’t mean it’s the best way to do it. Service Integration is the act of connecting components together at a low level, which usually results in a single external endpoint for you to expose to your customers or other teams within your organisation – a simple product ordering system, for example, might integrate a stock checking service and a payment processing service. Process Orchestration, however, is generally a higher level approach whereby the (often externally exposed) service endpoints are brought together to track an end-to-end business process. This might include the earlier example of a product ordering service and couple it with a business rules service and human task to handle edge-cases. A good (but not exhaustive) rule-of-thumb is that integrations performed by an ESB will usually be real-time, whereas process orchestration in a SOA composite might comprise processes which take a certain amount of time to complete, or have to wait pending manual intervention. BPEL vs BPMN For some, with pre-existing SOA or business process projects, this decision is effectively already made. For those embarking on new projects it’s certainly an important consideration for those using Oracle SOA software since, due to the components included in SOA Suite and BPM Suite, the choice of which to buy is determined by what they offer. Oracle SOA suite has no BPMN engine, whereas BPM suite has both a BPMN and a BPEL engine. SOA suite has the ESB component “Mediator”, whereas BPM suite has none. Decisions must be made, therefore, on whether just one or both process modelling languages are to be used. The wrong decision could be costly further down the line. Design for performance: Read the complete article here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Technorati Tags: C2B2,SOA best practice,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Samba fails to install

    - by jschoen
    I am running XBMC, which is built around Ubuntu 10.04. It does not come with samba pre-installed, and I need to share some media with a couple other boxes. I followed the Think Geek directions found here. I had it all set up a couple days ago, and thought I was in the clear. I rebooted this evening and when it came back up Samba was not started. I determined this by trying access the samba shares, and it would return there was an connecting to the server. I can ssh into it, so I know it is connected. In my inifinite wisdom, I figured I just messed something up and would just uninstall and reinstall. So I did: sudo apt-get purge samba and sudo apt-get purge smbfs. Then tried to follow the tutorial above again. The what I get after running sudo apt-get install samba smbfs is Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: openbsd-inetd inet-superserver smbldap-tools ldb-tools ufw smbclient The following NEW packages will be installed: samba smbfs 0 upgraded, 2 newly installed, 0 to remove and 5 not upgraded. Need to get 0B/8,131kB of archives. After this operation, 22.6MB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package samba. (Reading database ... 57098 files and directories currently installed.) Unpacking samba (from .../samba_2%3a3.4.7~dfsg-1ubuntu3.2_i386.deb)... Selecting previously deselected package smbfs. Unpacking smbfs (from .../smbfs_2%3a3.4.7~dfsg-1ubuntu3.2_i386.deb) ... Processing triggers for ureadahead ... Setting up samba (2:3.4.7~dfsg-1ubuntu3.2) ... Generating /etc/default/samba... update-alternatives: using /usr/bin/smbstatus.samba3 to provide /usr/bin/smbstatus (smbstatus) in auto mode. smbd start/running, process 2963 **start: Job failed to start** Setting up smbfs (2:3.4.7~dfsg-1ubuntu3.2) ... The bold is my own emphasis. So I am not sure what I messed up here, or how to get back to where it was. Though I am pretty sure I made it worse than it is. I found where the logs are located, /var/logs, and found this line that seems to be the culprit. Jan 29 11:59:34 XBMCLive smbd[2806]: error opening config file So it seems to not create the configuration files. Is there a way to get samba to try to recreate them again?

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar's Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a 'perfect storm' of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one's work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven't far more qualified and established commentators, MVPs and so on, already said it? While it's a good idea to pick reasonably fresh and interesting topics, it's more important not to let such fears lead to writer's block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn't always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what's involved in getting an application that is 'done' ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we'd love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to 'throw your hat into the ring', drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar’s Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a ‘perfect storm’ of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one’s work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven’t far more qualified and established commentators, MVPs and so on, already said it? While it’s a good idea to pick reasonably fresh and interesting topics, it’s more important not to let such fears lead to writer’s block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn’t always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what’s involved in getting an application that is ‘done’ ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we’d love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to ‘throw your hat into the ring’, drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • Good Customer Service Example

    - by MightyZot
    Here’s another good customer service example for you! My wife purchased a Galaxy last week and she loves the phone.  She asked me to add it to our AT&T Microcell last night. I purchased the AT&T Microcell a couple of years ago, because cell signal out where I live sucks! Since microcells are managed on the AT&T web site, I went to the site and tried to sign in. Naturally, having not managed that microcell in a couple of years…and much to my chagrin…I discovered that I didn’t know my password OR my user ID. So, I decided to call and see if I could get my account reset that late in the day (we’re talking last night, so it was well after 7pm.) I called the technical support line, touched the appropriate numbers to navigate to microcell support, turned on my speaker phone, and prepared for the long wait. After about 45 seconds I was delighted to hear “Jeffrey” break in and ask what he could help me with. I explained that I have not managed my microcell for some time and had forgotten the user name and password.  “No problem”, he replied, and he asked me for the line I used to register the microcell. After confirming the last four digits of my IMEI number, he asked me for my wife’s number. I gave him my wife’s number and he said, “I’ve taken care of it Mr Pope. Just have her reboot her phone and you should see your microcell.” We rebooted her phone, it connected to the microcell, and voila, she was online! “Is there anything else I can help you with while I’ve got you on the line”, he said. “Nope”, I replied. “Ok, have a great night.” What made this a great customer service experience for me was that “Jeffrey” didn’t stop at giving me my user account and password, which I would probably forget anyway after setting up my wife’s new phone. Instead, he solved the real problem for me – adding my wife’s new phone to my microcell. Great job Jeffrey!

    Read the article

  • What to do when opensource project starts to tear apart? (or a manager tries to write code and than shouts at the team)

    - by Kabumbus
    Imagine there is an open source cross-platform project on Google code. It has lots of revisions (1000). It concentrates in itself lots technological stuff - rare stuff - it mixes top tech. It contains server, and more than one client. The project was created by a well-connected team of developers (friends) and a manager that was sponsoring project at its start up during its first few months (project now is more than a year old-sponsoring oss project is a big good deal- also gave the idea of project to developers). The project was growing in complexity and effort reqiered to continue development. Once upon a time a manager - team leader started trying to write code (he was a programmer in some other projects - not the best, but he felt like he was one). He started because one of the developers suggested an idea at the team meeting and he felt he just needed to do it on his own. He failed, and he told the dev team about it. The dev team did what he failed to do in a few days. After that, the manager feels that team codes with out him perfectly and gets the job done in short time. He felt sorry and lost and he started to crash like an old bad PC. Firstly, he started to scream (in forms of messages not in voice) he tried to tell developers that what they were doing was a bad, not-needed thing - developers kindly told him that his "beginnings" were not compilable while dev team product worked as needed. He told the developers that all work they do should be firstly discussed with him. Here is the part where we need to mention that all team members are "project owners" and logically have equal rights. The team leader suggested to the developers these options: change their dev process to go through him, or be moved from project owners to contributers. So what are our options as developers? What arguments we can provide to the team leader/manager for him to calm down? Is it possible to save the project or is it better to fork out now? An important issue is that lately we had no active ticket system, and I personally think that this was the reason the mess appeared. So... any ideas?

    Read the article

  • Programming Language, Turing Completeness and Turing Machine

    - by Amumu
    A programming language is said to be Turing Completeness if it can successfully simulate a universal TM. Let's take functional programming language for example. In functional programming, function has highest priority over anything. You can pass functions around like any primitives or objects. This is called first class function. In functional programming, your function does not produce side effect i.e. output strings onto screen, change the state of variables outside of its scope. Each function has a copy of its own objects if the objects are passed from the outside, and the copied objects are returned once the function finishes its job. Each function written purely in functional style is completely independent to anything outside of it. Thus, the complexity of the overall system is reduced. This is referred as referential transparency. In functional programming, each function can have its local variables kept its values even after the function exits. This is done by the garbage collector. The value can be reused the next time the function is called again. This is called memoization. A function usually should solve only one thing. It should model only one algorithm to answer a problem. Do you think that a function in a functional language with above properties simulate a Turing Machines? Functions (= algorithms = Turing Machines) are able to be passed around as input and returned as output. TM also accepts and simulate other TMs Memoization models the set of states of a Turing Machine. The memorized variables can be used to determine states of a TM (i.e. which lines to execute, what behavior should it take in a give state ...). Also, you can use memoization to simulate your internal tape storage. In language like C/C++, when a function exits, you lose all of its internal data (unless you store it elsewhere outside of its scope). The set of symbols are the set of all strings in a programming language, which is the higher level and human-readable version of machine code (opcode) Start state is the beginning of the function. However, with memoization, start state can be determined by memoization or if you want, switch/if-else statement in imperative programming language. But then, you can't Final accepting state when the function returns a value, or rejects if an exception happens. Thus, the function (= algorithm = TM) is decidable. Otherwise, it's undecidable. I'm not sure about this. What do you think? Is my thinking true on all of this? The reason I bring function in functional programming because I think it's closer to the idea of TM. What experience with other programming languages do you have which make you feel the idea of TM and the ideas of Computer Science in general? Can you specify how you think?

    Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >