Search Results

Search found 15780 results on 632 pages for 'pass board elections 2011'.

Page 297/632 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• django subdomains apache config

  - by bocca

  Trying to setup django to take subdomains and use different settings file based on subdomain dns is setup as wildcards apache mod_vhost_alias sounded like good option, it did not work SetEnv DJANGO_SETTINGS_MODULE site.settings.%1 gets this error ImportError: Could not import settings 'site.settings.%1' can mod_vhost_alias be made to work somehow? can rewrite module be used to pass along subdomain to django settings? is there any other way to pick up different settings files based on subdomain

  Read the article

• sniffing on a switched LAN

  - by shodanex

  Hi, I often find myself in the position of having to sniff on a connection between for example an arm board I am developing on, and another computer on the network, or out of the network. The easy situation is when I can install a sniffer on the computer talking to the embedded device. When it is not possible, I currently install an old 10Mb/s HUB. However I am afraid my HUB might stop working, and I would like to know some alternative. Here are the alternatives I could think of : Buy another HUB. Is that still possible ? Have some sort of ethernet sniffing bridge, like what they do for USB. I am afraid this kind of device is expensive. use ARP poisoning.

  Read the article

• Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

  - by Forkrul Assail

  Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

  Read the article

• Virtualised Sharepoint Backup Strategies

  - by dunxd

  I have a Sharepoint (OSS 2007) farm running on three virtual machines in VMWare ESX, plus a SQL Server backend on physical hardware. During a recent Business Continuity Planning event I tried restoring the sharepoint farm with only the config and content databases, and failed to get things working. My plan was to build a new sharepoint server, then attach this to a restoration config database and install the Central Management site on this server, then reattach the content databases. This failed at the Central Management part of the plan. So I am back to the drawing board on the best strategy for backup and recovery, with reducing the time and complexity of the restore job the main objective. I haven't been able to find much in the way of discussion of backup/restore strategies for Sharepoint in a VMWare environment, so I figured I'd see if anyone on server fault has any ideas or experience.

  Read the article

• double-click to run .sh file

  - by Delirium tremens

  GUI: I changed the permissions of an sh file, so that I can read, write and execute it. I double-clicked it, selected run in Terminal, but it didn't run. I double-clicked it, selected run, but it didn't run. Command-Line: bash *filename* runs it sh *filename* runs it The file content is: #!/bin/bash # get dirsyncpro home DIRSYNCPRO_HOME="$(dirname $0)" # start programm and pass any parameters java -Xmx512M -jar "$DIRSYNCPRO_HOME/dirsyncpro.jar" $* Works in this person's computer: http://www.knowliz.com/2008/08/how-to-installrun-sh-file-in-linux.html What's going on?

  Read the article

• Using custom variables in Google Analytics funnels?

  - by Matt Huggins

  Google Analytics allow you to view how many users completed funnels through a set of pages in order to reach a goal URL. The service also allows you to pass custom variables when tracking a page view. Is it possible to combine the two, such that I create a funnel based upon the vale of a custom variable set for each visitor?

  Read the article

• Fix for OpenSolaris with no gcc vs. Nexenta with no ext3

  - by Jake Wharton

  I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

  Read the article

• NLB Accessed Denied from second server

  - by Igor K

  Hello Have NLB set up and working. Just two servers, web1 and web2. I set up NLB on web1 and can view both machines as Converged. (I had to specify a login/pass to connect to web2). On web2, looking at the NLB Manager, it only shows web2 and says in the log "Accessed Denied. Error connecting to web1". Any ideas how to fix?

  Read the article

• How Amazon ELB Health check Works?

  - by diegodias

  I am having problems configuring ELB for my servers. I start 2 micro instances with the exact same conf and try to do Load Balancing. However they never pass the health check (HTTP port 80 path:"/"). Ping is ok on the website. So is telnet on 80. How did the health check works? Am I doing anything really wrong? EDIT: Both Direct browser access and GET (via curl) works correctly (status 200)

  Read the article

• Minimalistic flatfile "wall" software with authentication and RSS?

  - by Nicolas Raoul

  I am looking for an open-source minimalistic "message board" PHP software. Not a forum, more something like one simple facebook wall. The only thing a user can do is post a new message. With RSS, and able to run on flat files (no database) with Apache+PHP Authentication based on a configuration file, no management UI needed. For now I use this software, but it lacks RSS: http://nrw.free.fr/data/projects/pano/demo/index.php?pano=ifc Anyone knows a software that matches my description? Thanks! Usage: communication between my family's 5 members living on different continents.

  Read the article

• How to escape the > sign on Windows command line?

  - by MaxVT

  For example, foo -option 10->30 file.ext (this is an actual syntax required) redirects the output to a file named 30. How do I make cmd understand that I would like to pass the actual character? I've tried several forms of double quotes to no avail.

  Read the article

• Need Varnish configuration advice

  - by Patrick

  Hello fellows, I need some advice here for default.vcl. Here's the rules: Only cache pages with urls that contains '/c/', the rest will pass Set the cache expiry to 3 hours Only cache and serve from cache if cookie 'abc' and cookie 'xyz' is empty Thank you!

  Read the article

• OpenVPN on Tomato and Vista - can't see my network

  - by Ian

  I followed the instructions here (http://todayguesswhat.blogspot.ca/2011/03/quick-simple-vpn-setup-guide-using.html) to set up a TCP connection to OpenVPN on my Tomato router. Used TCP because the place I usually surf at seems to have the other ports blocked. My Vista laptop is able to connect to the router but I don't appear to be getting an IP address. I'm able to access my router's admin page, but I can't see the network at home. When I browse to Whatsmyip I see my home IP. Here are the results of route print -4 when I'm just connect to the library and when I've fired up the VP connection as well: Library only: =========================================================================== Interface List 22 ...00 ff c4 a0 e7 5c ...... TAP-Win32 Adapter V9 15 ...00 23 4e 20 b3 64 ...... Atheros AR9281 Wireless Network Adapter 10 ...00 23 8b 39 ec 71 ...... Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller 1 ........................... Software Loopback Interface 1 11 ...00 00 00 00 00 00 00 e0 isatap.{834A8A0A-5E2C-47D0-9673-7965DE8B5470} 14 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface 17 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 20 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 18 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 19 ...00 00 00 00 00 00 00 e0 6TO4 Adapter 23 ...00 00 00 00 00 00 00 e0 isatap.{C4A0E75C-765E-4F7D-A55C-77945779816A} 34 ...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Library and TCP OpenVPN: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.29.1 10.1.29.117 25 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.116 30 0.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 10.1.29.0 255.255.255.0 On-link 10.1.29.117 281 10.1.29.117 255.255.255.255 On-link 10.1.29.117 281 10.1.29.255 255.255.255.255 On-link 10.1.29.117 281 24.212.205.68 255.255.255.255 10.1.29.1 10.1.29.117 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 192.168.1.1 192.168.1.116 30 192.168.1.0 255.255.255.0 On-link 192.168.1.116 286 192.168.1.116 255.255.255.255 On-link 192.168.1.116 286 192.168.1.255 255.255.255.255 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.116 286 224.0.0.0 240.0.0.0 On-link 10.1.29.117 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.116 286 255.255.255.255 255.255.255.255 On-link 10.1.29.117 281 =========================================================================== Thanks for any advice. I looked at one of the answers but I'm not sure if it applied to me as it said that 10...* was the vpn connection, but I appear to have 10...* when I connect just to the library.

  Read the article

• unable to access shared drives n win7

  - by colin

  OK, this is doing my head in. Not your usual Win7 sharing problem. Just built a win 7 comp to go onto my home lan and be accessed by all on the network, mostly running XP SP3. Installed it as a single HD+DVD system, got it happy, then added my storage drives, set them up in the right order and letters, rebooted, and shared them. Couldn't access the computer at all from any XP machine. Set the pasword thingy in win7 to NO, and now I can "see" all four shared drives from any machine, but can access only two of them. Please tell me whats going on as I've done nothing different from one drive to the other, just installed and set up drive letters as normal, then shared the damn things. The odd thing about it? the two 1.5T drives that have a lot of data on board are accessable, the two nearly empty 500G ones are not. ANY ideas? Cheers, Colin

  Read the article

• Ubuntu 9.1 Only Sees 244 MB RAM, while BIOS and Windows Sees 1.5 GB

  - by nicorellius

  I have 1.5 GB of RAM installed on an older Dell, Pentium 4. I just installed Ubuntu 9.1 and the system is only seeing 244 MB of RAM, even though there is 1.5 GB on the system. The BIOS sees all of it. I ran a Knoppix disc and it only saw 25 MB upon booting. I made no particular changes to the installation taht would affect this. I looked through the BIOS and the only setting I could see was the AGP aperture. Not even sure what this is. Anyone know where I went wrong? I also tried moving the memory modules around on the board. Booted with the 1 GB stick, still saw 244 MB.

  Read the article

• Are there pitfalls to using incompatible RAM (frequencies) in motherboards?

  - by osij2is

  I'd like to use 2 x 4GB DDR3 1600 dimms in a motherboard capable of only DDR3 1066. The DDR3 1600 is on sale and the cost is identical to 1066 dimms. It'd be nice to have these faster sticks around should i upgrade the motherboard. I assume the RAM can under clock itself or be changed in the BIOS. While obviously it's less than ideal situation, I don't know if there are other unintended consequences in terms of stability, performance and longevity of the board and said RAM. Am I doing any damage to the memory controller or RAM? I've always bought RAM at the max speed specified for the motherboard and I've never gone over so I'm not sure if there any caveats to this at all. Edit: I intend to use the RAM in pairs. I know that mixing RAM speeds is just a bad idea.

  Read the article

• Bonding: works only for download

  - by Crazy_Bash

  I would like to install bonding with 4 links with mode 4. but only "download/receiving" works with bondig. for transmitting the system chooses one link. ifconfig bond0 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 inet addr:ip Bcast:ip Mask:255.255.255.248 inet6 addr: fe80::92e2:baff:fe0f:76b4/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:239187413 errors:0 dropped:10944 overruns:0 frame:0 TX packets:536902370 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14688536197 (13.6 GiB) TX bytes:799521192901 (744.6 GiB) eth2 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:54969488 errors:0 dropped:0 overruns:0 frame:0 TX packets:2537 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3374778591 (3.1 GiB) TX bytes:314290 (306.9 KiB) eth3 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:64935805 errors:0 dropped:1 overruns:0 frame:0 TX packets:2532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3993499746 (3.7 GiB) TX bytes:313968 (306.6 KiB) eth4 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:57352105 errors:0 dropped:2 overruns:0 frame:0 TX packets:536894778 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3524236530 (3.2 GiB) TX bytes:799520265627 (744.6 GiB) eth5 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:61930025 errors:0 dropped:3 overruns:0 frame:0 TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3796021948 (3.5 GiB) TX bytes:314274 (306.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5320 (5.1 KiB) TX bytes:5320 (5.1 KiB) those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 4 Actor Key: 17 Partner Key: 11 Partner Mac Address: 00:24:51:12:63:00 Slave Interface: eth2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b4 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b5 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b6 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b7 Aggregator ID: 1 Slave queue ID: 0 /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 mode 6

  Read the article

• Give the path to the inserted USB key to a script

  - by Xavier Nodet

  I'd like to run a given Perl script whenever I connect my camera to my PC, so that this script will download all the photos on it. But as the drive letter for the camera may change depending on what's already connected, I need to pass this drive letter as an argument to the script. Is this doable? Thanks. PS: if this is not possible, an answer to this other question would be very helpful.

  Read the article

• Access a Windows Proxy server through Debian/Ubuntu

  - by Lee

  I am trying to access the Internet from a Debian server using a Windows Proxy server which requires authentication. I have tried using this command in the /etc/bash/bashrc file, but it still doesn't seem to work, any ideas? export HTTP_PROXY=http://user:pass@ipaddress:port Many thanks

  Read the article

• Should I disable write caching on my Windows 2008 VM?

  - by javano

  I have a Windows Server 2008 x64 Standard virtual machine that runs on a machine with a hardware RAID controller, a Perc 6/i, which has a battery on-board. Doing everything I can for additional performance, I think I should disable this. Is this very dangerous though? My understand is that Battery Backed Write Caching gives a performance boost to the host OS, telling it the write was complete when they are still sitting in flash waiting to be written. However, I can't see how it would be detrimental to performance, but is there a gain (even if marginal) to enabling it / disabling it? P.s. There machine has a backup power. Here is a screen shot for clarification:

  Read the article

• Samba 'include' a per user config script

  - by cb0

  It is possible to use the include = /somepath/%u.smb.conf in the global section to call a script /somepath/cb0.smb.conf if the user cb0 connects to the samba server. Unfortunately this does not wotk for me because testparm alway gives me Can't find include file /somepath/.smb.conf When I connect to the server I can enter a username and pass but it alway rejects the connection. I'm using Samba Version 3.2.5 How can I achieve to load a custom user script depending on the user that is connecting ?

  Read the article

• Finding out if an IP address is static or dynamic?

  - by Joshua

  I run a large bulletin board and I get spammers every now and again. My moderation team does a good job filtering them out but every time I IP ban them they seem to come back (I'm pretty sure it's the same person on some occasions, as the post patterns are exactly the same as are the usernames) but I'm afraid to ban them by IP address every time. If they are on a dynamic IP address, I could be banning innocent users later down the line when they try to get to my forum through SERPs, but if I ban only via static IPs I know that I'm only banning that one person. So, is there a way to properly determine if an IP address is static or dynamic? Thanks.

  Read the article

• Unable to remove limit on memory usage for PHP script.

  - by Jess Telford

  The Situation I am having an issue with a PHP script getting the following error message: Fatal error: Out of memory (allocated 359923712) (tried to allocate 72 bytes) in /path/to/piwik/core/DataTable.php on line 969 The script I'm running is: /path/to/piwik/misc/cron/archive.sh I am assuming the numbers are Bytes, which means that total is approximately 360MB. For all intents and purposes, I have increased the memory limits on the server well above 360MB, yet this is the number (give or take a byte) it consistently errors out at. Please note: This question is not about fixing a memory leak in the script, nor about why the script itself is using so much memory. The script is part of the Piwik archiving process, so I cannot just fix any memory leaks, etc. For more info on this script and why I am increasing the memory limit, see "How to setup auto archiving" The question Given that the script is attempting to use over 360MB of memory, which I cannot change, why does it not seem possible for me to increase the amount of memory available to php on my server? What I've tried Increasing PHP's memory_limit Given the php.ini file: php -i | grep php.ini Configuration File (php.ini) Path => /usr/local/lib Loaded Configuration File => /usr/local/lib/php.ini I have edited that file, so the memory_limit directive reads; memory_limit = -1 Restart Apache, and check the new value has stuck; $ php -i | grep memory_limit memory_limit => -1 => -1 Run the script, and get the same error. I've also tried 1G, 768M, etc, all to the same result (ie; no change). Update 22nd June: Based on Vangel's help, I have attempted to set post_max_size to 20M in combination with setting memory_limit. Again, this has no effect. Removing the memory limit on child processes of Apache I have found and edited the httpd.conf file to make sure there is no RLimitMEM directive. I then used WHM's Apache Configuration Memory Usage Restrictions to generate a restriction, which it claimed was at 1000M (and confirmed by checking httpd.conf). Both of these resulted in no change to the script erroring at 360MB. Increasing the per process memory limits of Linux The current limits set on the system: $ ulimit -m 524288 $ ulimit -v 524288 I have attempted to set both of these to unlimited: $ ulimit -m unlimited $ ulimit -v unlimited $ ulimit -m unlimited $ ulimit -v unlimited Once again, this has resulted in absolutely no improvement in my problem. My setup $ cat /etc/redhat-release CentOS release 5.5 (Final) $ uname -a Linux example.com 2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux $ php -i | grep "PHP Version" PHP Version => 5.2.9 $ httpd -V Server version: Apache/2.0.63 Server built: Feb 2 2011 01:25:12 Cpanel::Easy::Apache v3.2.0 rev5291 Server's Module Magic Number: 20020903:13 Server loaded: APR 0.9.17, APR-UTIL 0.9.15 Compiled using: APR 0.9.17, APR-UTIL 0.9.15 Architecture: 64-bit Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D HTTPD_ROOT="/usr/local/apache" -D SUEXEC_BIN="/usr/local/apache/bin/suexec" -D DEFAULT_PIDLOG="logs/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="logs/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="conf/mime.types" -D SERVER_CONFIG_FILE="conf/httpd.conf" Output of $ php -i: http://pastebin.com/EiRut6Nm

  Read the article

• How to get the parent node of a given child node using PowerShell?

  - by kumar

  I am new to PowerShell. I have to write a script which can return me the first parent(node) value by passing the child node. I have the following XML. When I pass my PowerShell script the value "AAA", it should return "parent2", and when I pass "III", it should return "parent311". Can someone help me write this script? XML: <root> <parent> <parent2> <child>AAA</child> </parent2> <parent3> <child>BBB</child> <child>CCC</child> <child>DDD</child> </parent3> <parent4> <child>EEE</child> </parent4> <parent5> <child>FFF</child> </parent5> </parent> <parent21> <parent211> <child>GGG</child> </parent211> <parent311> <child>HHH</child> <child>III</child> <child>JJJ</child> </parent311> <parent411> <child>KKK</child> </parent411> <parent511> <child>LLL</child> </parent511> </parent21> </root>

  Read the article

• SQL2008R2 install issues on windows 7 - unable to install setup support files?

  - by Liam

  I am trying to install the above but am getting the following errors when its attempting to install the setup support files, This is the first error that occurs during installation of the setup support files TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401 This is the second error that occurs after clicking continue in the installer after the first error is generated TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: SQL Server Setup has encountered an error when running a Windows Installer file. Windows Installer error message: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer file: C:\Users\watto_uk\Desktop\In-Digital\Software\Microsoft\SQL Server 2008 R2\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110713_205508\SqlSupport_Cpu64_1_ComponentUpdate.log Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDC80C325 These errors are generated from an ISO package downloaded from Microsoft. I have also tried using the web platform installer to install the express version instead but the SQL Server Installation fails with that also. The management studio installs fine but not the server. I have checked to make sure that the Windows Installer is started and it is. Cant seem to find an answer for this anywhere as all previous reported issues appear to be related to XP. I did have the express edition installed on the machine previously but uninstalled it to upgrade to the full version, I wish I hadn't now. Can anyone kindly offer any advice or point me in the right direction to stop me going insane with this? Any advice will be appreciated. Update======================= After digging a bit deeper ive located details of the error from the setup log file, i can also upload the log file if required. MSI (s) (E8:28) [23:35:18:705]: Assembly Error:The module '%1' was expected to contain an assembly manifest. MSI (s) (E8:28) [23:35:18:705]: Note: 1: 1935 2: 3: 0x80131018 4: IStream 5: Commit 6: MSI (s) (E8:28) [23:35:18:705]: Note: 1: 2337 2: 0 3: Microsoft.SqlServer.GridControl.dll MSI (s) (E8:28) [23:35:22:869]: Product: Microsoft SQL Server 2008 R2 Setup (English) -- Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:916]: Internal Exception during install operation: 0xc0000005 at 0x000007FEE908A23E. MSI (s) (E8:28) [23:35:22:916]: WER report disabled for silent install. MSI (s) (E8:28) [23:35:22:932]: Internal MSI error. Installer terminated prematurely. Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:932]: MainEngineThread is returning 1603 MSI (s) (E8:58) [23:35:22:932]: RESTART MANAGER: Session closed. Installer stopped prematurely. MSI (c) (0C:14) [23:35:22:947]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (0C:14) [23:35:22:947]: MainEngineThread is returning 1601 === Verbose logging stopped: 13/07/2011 23:35:22 ===

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >