Search Results

Search found 20043 results on 802 pages for 'password assistant mac'.

Page 297/802 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• Iomega eGo Encrypt Plus Encrypted Partition not mounting properly says "local disk"

  - by mosiac

  I'm working with an Iomega eGo 500gb Encrypt Plus portable drive. When I first set it up and installed the software and set a user password everything worked fine. The partition labeled "IomegaHDD" mounted properly and I could access the free space. Then I changed the ADMIN password which required me to lockout the device, wait 60 seconds, and then login to the Admin section and change the password, lockout the device again, wait 60 seconds, and then log back in with my user password. When I did that it of course unmounted the IomegaHDD partition to secure it, when it remounts it, it only shows up as "local disk" now and will not remount properly. I had not removed the cable while doing any of this. I have since tried unplugging and plugging back in to login to the drove but that has not worked. I'm wondering if I should remove every instance of "generic usb hub" from device manager and wait for it to re-add itself, or move it to a new set of USB ports temporarily to seee if that helps. Any ideas?

  Read the article

• Adding an user to samba

  - by JustMaximumPower

  I'm trying to setup some samba shares in my home network on an Ubuntu 12.04 machine. Everything works fine for my user account (max) but I can not add any new user. Every time I try to add new user they can not use the shares. It's likely that the error is very basic to the concept of samba but please don't just tell me to read the docs. I've been trying that for about 2 weeks now. I've set up the server with my user max who can mount transfer and the share max. Than I added the user simon with sudo adduser --no-create-home --disabled-login --shell /bin/false simon because the user should not be able to ssh into the machine. I did an sudo smbpasswd -a simon and set an (samba) password for simon and added an share for simon. I also added simon to transferusers to give him access to the share transfer. But simon can't connect to transfer or simons. ---- output of testparam: ------- Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[print$]" Processing section "[max]" Processing section "[simons]" Processing section "[transfer]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [max] comment = Privater share von Max path = /media/Main/max read only = No create mask = 0700 [simons] comment = Privater share von Simon path = /media/Main/simon read only = No create mask = 0700 [transfer] comment = Transferlaufwerk path = /media/Main/transfer read only = No create mask = 0755 ---- The files in /media/Main: ------ drwxrwxr-x 17 max max 4096 Oct 4 19:13 max/ drwx------ 5 simon max 4096 Aug 4 15:18 simon/ drwxrwxr-x 7 max transferusers 258048 Oct 1 22:55 transfer/

  Read the article

• KVM recommendations

  - by alex

  I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

  Read the article

• Why can't I ssh into my server using my private key?

  - by user61342

  I just setup my new server as I used to, and this time I can't login using my private key. The server is ubuntu 11.04. And I have setup following ssh key directories. root@myserv: ls -la drwx------ 2 root root 4096 Sep 23 03:40 .ssh And in .ssh directory, I have done chmod 640 authorized_keys Here is the ssh connection tracebacks: OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to [my.server.ip] [[my.server.ip]] port 22. debug1: Connection established. debug1: identity file /Users/john/.ssh/id_rsa type -1 debug1: identity file /Users/john/.ssh/id_rsa-cert type -1 debug1: identity file /Users/john/.ssh/id_dsa type 1 debug1: identity file /Users/john/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-1ubuntu3 debug1: match: OpenSSH_5.8p1 Debian-1ubuntu3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ef:b8:8f:b4:fc:a0:57:7d:ce:50:36:17:37:fa:f7:ec debug1: Host '[my.server.ip]' is known and matches the RSA host key. debug1: Found key in /Users/john/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/john/.ssh/id_rsa debug1: Offering RSA public key: /Users/john/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password root@[my.server.ip]'s password: Update: I have found the reason but I can't explain it yet. It is caused by uploading the key using rsync -chavz instead of scp, after I used scp to upload my key, the issue is gone. Can someone explain it? Later, I tried rsync -chv, still not working

  Read the article

• Formatting data from management database

  - by bVector

  I've got some data that goes like this: Config_Name Question Answer Cisco WAN Sensitivity: High Cisco WAN Authorized Users: Brent, Charles Cisco WAN Last Audited: n/a Cisco WAN Next Audit: 3/30/2012 Cisco WAN Audit Signature: Cisco WAN Username: MYCOMPANY Cisco WAN Password: Cisco WAN Encrypted-A ENCRYPTED DATA Cisco WAN Encrypted-B Cisco WAN Encrypted-C vCenter server Sensitivity: High vCenter server Authorized Users: Brent, Charles vCenter server Last Audited: vCenter server Next Audit: 3/30/2012 vCenter server Audit Signature: ENCRYPTED DATA vCenter server Username: administrator vCenter server Password: vCenter server Encrypted-A ENCRYPTED DATA vCenter server Encrypted-B vCenter server Encrypted-C AKSC-NE01 IPMI Sensitivity: High AKSC-NE01 IPMI Authorized Users: Brent, Charles AKSC-NE01 IPMI Last Audited: AKSC-NE01 IPMI Next Audit: 3/30/2012 AKSC-NE01 IPMI Audit Signature: ENCRYPTED DATA AKSC-NE01 IPMI Username: MYCOMPANY AKSC-NE01 IPMI Password: AKSC-NE01 IPMI Encrypted-A ENCRYPTED DATA AKSC-NE01 IPMI Encrypted-B AKSC-NE01 IPMI Encrypted-C and I need it to be in this format: Config_Name Sensitivity: Authorized Users: Last Audited: Next Audit: Audit Signature: Username: Password: Encrypted-A Encrypted-B Encrypted-C AKSC-NE01 IPMI High Brent, Charles 3/30/2012 ENCRYPTED DATA MYCOMPANY ENCRYPTED DATA Cisco ASA5505 WAN High Brent, Charles n/a 3/30/2012 ENCRYPTED DATA MYCOMPANY ENCRYPTED DATA vCenter server High Brent, Charles 3/30/2012 ENCRYPTED DATA administrator ENCRYPTED DATA the tabs get messed up on here but hopefully you get my drift. does anyone know an easy way to do this? I haven't found one with excel just yet.

  Read the article

• How do I get more information on a potential network freeloader?

  - by Dov

  I have a home network set up, complete with a relatively good password. I'm in Mac OS X 10.6 (Snow Leopard) and have been noticing, on occasion, a computer showing up in my Finder's Shared section, that is not one of my own (the "pe-xpjalle" box pictured below). He has a tendency to come and go. How can I figure out his MAC address or something, so I can block him? I checked my "Logs and Statistics" in the Airport Utility, and didn't see that computer under DHCP clients. I'd rather not change my password, since I have quite a few devices I'd have to update. Is there any other reason he's show up on my network besides having guessed my password? Update: I fixed the Dropbox URL above (how embarrassing, I'm new to Dropbox. Thanks for the heads up, Doug.) Update 2: I tried clicking on "Connect as..." just for the hell of it, and got the dialog below. Now I have even less an idea what's going on than before. I don't have Parallels of VMware running, just the following: Transmission, NetNewsWire, Mail, Things, Safari, iTunes, Photoshop, Pages, Yojimbo, Preferences, AppleScript Editor, Software Update, Airport Utility, and Terminal. I don't think any of those create a virtual network machine, right? And no VMware machine of mine has ever had a name resembling "pe-xpjalle". Update 3: I just changed my passwords on both my N- and G-only networks, and I'm still seeing this, so I highly doubt that it's someone who's figured out my password (twice now). I'm really stumped.

  Read the article

• Why does bash sometimes think my $HOME isn't the correct directory?

  - by Adam Yanalunas

  Like the title says it seems that bash sometimes misidentifies my $HOME. This cropped up after a seemingly unique series of events that I will now replay in broad strokes. Running OS X 10.6 with normal, local account Work binds my account to Active Directory Much time passes with no issues Set up rvm to manage Ruby installs (this becomes important later) Upgraded to OS X 10.7 a few days ago After successful install, attempted to log in, was presented with "Must reset password" dialog that never allowed a password to be reset. Would simply shake the box after new password was entered. Much googling was done. Much more googling was done. Swearing was had. Logged in as root, created new account, set as admin, deleted /Users/[new account], renamed /Users/[old account] to /Users/[new account] Logged out of root, logged into new account with no issues After OS X asking for a my account password a few times to update Keychain and other system-level stuff it was back to business as usual. Opened Terminal, cd to project folder, tried "rails server" and was presented with: /usr/local/lib/ruby/1.9.1/rubygems/dependency.rb:247:in to_specs': Could not find rails (>= 0) amongst [] (Gem::LoadError) from /usr/local/lib/ruby/1.9.1/rubygems/dependency.rb:256:into_spec' from /usr/local/lib/ruby/1.9.1/rubygems.rb:1210:in gem' from /usr/local/bin/rails:18:in' Ran through a few exercises, decided to rm -rf ~/.rvm and reinstall. Running a --trace on the rvm installer shows it dies on this line: mkdir: /Users/[old account]: Permission denied Scrolling back through the --trace log I see many more mentions of /Users/[old account]. When inspect the install script the offending line is looking at "${HOME}/.rvm" as it tries to run the mkdir. To my confusion I also see mentions of /Users/[new account] in the log. I've tried exporting a new HOME in my .bash_profile to no luck. Can anyone guess why /Users/[old account] would still be kicking around?

  Read the article

• Subversion 1.6 + SASL : Only works with plaintext 'userPassword'?

  - by SiegeX

  I'm attempting to setup svnserve with SASL support on my Slackware 13.1 server and after some trial and error I'm able to get it to work with the configuration listed below: svnserve.conf [general] anon-access = read auth-access = write realm = myrepo [sasl] use-sasl = true min-encryption = 128 max-encryption = 256 /etc/sasl2/svn.conf pwcheck_method: auxprop auxprop_plugin: sasldb sasldb_path: /etc/sasl2/my_sasldb mech_list: DIGEST-MD5 sasldb users $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP test@myrepo: userPassword You'll notice that the output of sasldblistusers2 shows my test user as having both an encrypted cmusaslsecretOTP password as well as a plain text userPassword passwd. i.e., if I were to run strings /etc/sasl2/my_sasldb I would see the test users' password in plaintext. These two password entries were created with the following subversion book recommended command: saslpasswd2 -c -f /etc/sasl2/my_sasldb -u myrepo test After reading man saslpasswd2 I see the following option: -n Don't set the plaintext userPassword property for the user. Only mechanism-specific secrets will be set (e.g. OTP, SRP) This is exactly what I want to do, suppress the plain text password and only use the mechanism-specific secret (OTP in my case). So I clear out /etc/sasl2/my_sasldb and rerun saslpasswd2 as: saslpasswd2 -n -c -f /etc/sasl2/my_sasldb -u myrepo test I then follow it up with a sasldblistusers2 and I see: $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP Perfect! I think, now I have only encrypted passwords.... only neither the Linux svn client nor the Windows TortoiseSVN client can connect to my repo anymore. They both present me with the user/pass challenge but that's as far as I get. TLDR So, what is the point of SVN supporting SASL if my sasldb must store its passwords in plaintext to work?

  Read the article

• One host on a network can't connect to one other host

  - by Max Williams

  I'm on a local network with a few other people. On of the hosts is a virtual machine running in virtualbox on a mac, which has the ip address 192.168.0.35 (the VM that is, not the mac host). Everyone except one guy can connect (ie ping, ssh etc) to that machine. When that one guy tries to ping it he gets Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 which i understand is just how certain mac os's report an unreachable connection. He can ping all the other hosts on the network, ie our computers, and we can all ping the VM fine and connect to it with no problems etc. His ip is 192.168.0.17. I ssh'd onto his machine (as a new user 'anon') and saw the same problems. I can ssh onto the 192.168.0.35 VM as well. From there, i can ping other users, but when i ping the problem guy, it's unreachable that way round as well. He restarted his mac, and was fine for a while. Then, just stopped working again. He's got a different IP to before. Any ideas, anyone? Don't know enough about this stuff to even diagnose the problem. thanks, max

  Read the article

• Mounting NAS drive with cifs using credentials file through fstab does not work

  - by mahatmanich

  I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

  Read the article

• Freeradius authentication failed for unknown reason

  - by Moein7tl

  I followed this instruction to force freeradius to use mysql database. and run freeradius in debug mod. but it rejects all authentication. mysql database : mysql select * from radcheck; +----+----------+-----------+----+---------+ | id | username | attribute | op | value | +----+----------+-----------+----+---------+ | 1 | test | Password | == | test123 | | 2 | test | Auth-Type | == | Local | +----+----------+-----------+----+---------+ 2 rows in set (0.02 sec) radtest command : # radtest test test123 localhost 0 testing123 Sending Access-Request of id 235 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=235, length=20 radiusd debug mod log: rad_recv: Access-Request packet from host 127.0.0.1 port 51034, id=235, length=74 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0xbf111cbbae24fb0f0a558bfa26f53476 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 20 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 20 Sending Access-Reject of id 235 to 127.0.0.1 port 51034 Waking up in 4.9 seconds. Cleaning up request 20 ID 235 with timestamp +4325 Ready to process requests. where is the problem and how should I solve it?

  Read the article

• Identifying mail account used in CRAM-MD5 transaction

  - by ManiacZX

  I suppose this is one of those where the tool for identifying the problem is also the tool used for taking advantage of it. I have a mail server that I am seeing emails that spam is being sent through it. It is not an open relay, the messages in question are being sent by someone authenticating to the smtp with CRAM-MD5. However, the logs only capture the actual data passed, which has been hashed so I cannot see what user account is being used. My suspicion is a simple username/password combo or a user account's password has otherwise been compromised, but I cannot do much about it without knowing what user it is. Of course I can block the IP that is doing it, but that doesn't fix the real problem. I have both the CRAM-MD5 Base64 challenge string and the hashed client auth string containing the username, password and challenge string. I am looking for a way to either reverse this (which I haven't been able to find any information on) or otherwise I suppose I need a dictionary attack tool designed for CRAM-MD5 to run through two lists, one for username and one for password and the constant of the challenge string until it finds a matching result of the authentication string I have logged. Any information on reversing using the data I have logged, a tool to identify it or any alternative methods you have used for this situation would be greatly appreciated.

  Read the article

• pam debugging "check pass; user unknown"

  - by lvc

  I am attempting to get Prosody authenticating with its auth_pam module. It is configured to use the pam service name xmpp. The pam.d/xmpp file is copied straight from the one configured for dovecot (originally taken from, I think, dovecot's documentation), which is known to be working: # cat /etc/pam.d/xmpp auth required pam_unix.so nullok debug account required pam_unix.so debug Logging in with dovecot works wonderfully. Logging in with prosody, with exactly the same username and password, causes Prosody to return 'Not authorized', and the following in journalctl -f: Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Client sent opening <stream:stream> to riscque.net Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Sent reply <stream:stream> to client Oct 29 22:12:14 riscque.net prosody[9396]: [178B blob data] Oct 29 22:12:14 riscque.net unix_chkpwd[9408]: check pass; user unknown Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): conversation failed Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): unable to obtain a password Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): auth could not identify password for [lvc] Oct 29 22:12:14 riscque.net prosody[9396]: riscque.net:saslauth: sasl reply: <failure xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><not-authorized/><text>Unable to authorize you with the authentication credentials you&apos;ve sent.</text></failure> This series of errors seems mutually contradictory - first it says "user unknown", but then that it can't obtain the password for lvc - this username certainly exists on the system. What is likely going on here, and how would I debug this further?

  Read the article

• How can I get the root account to generate an acceptable ssh key?

  - by Jamie

  On an ubuntu machine I did the following: ~$ sudo su - [sudo] password for jamie: root@mydomain:~# ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/root/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa. Your public key has been saved in /root/.ssh/id_rsa.pub. The key fingerprint is: 12:34:56:78:9a:bc:de:f0:12:34:56:78:9a:bc:de:f0 [email protected] The key's randomart image is: +--[ RSA 2048]----+ | | | | | | | | | | | | | | | | | | +-----------------+ root@mydomain:~# cat /root/.ssh/id_rsa.pub | ssh -p 443 [email protected] 'cat > authorized_keys' [email protected]'s password: root@mydomain:~# ssh -p 443 [email protected] [email protected]'s password: It's asking me for a password. However, using a regular account, the following works: $ cd ; ssh-keygen -t rsa ; cat ~/.ssh/id_rsa.pub | ssh [email protected] 'cat >> ~/.ssh/authorized_keys' $ ssh [email protected] Last login: Thu Oct 24 14:48:41 2013 from 173.45.232.105 [[email protected] ~]$ Which leads me to believe it's not an issue of authorized_keys versus authorized_keys2 or permissions. Why does the 'root' account accessing the remote 'jamie' account not work? The remote machine is CentOS if that's relevant.

  Read the article

• Synergy on macbook with osx mavericks wifi connection

  - by user332956

  I'm trying to set up Synergy with my macbook pro running OS X 10.9.3 as a client and my Windows 7 desktop as a server. I'm having some pretty bad connection problems though when I try to use my mac. Every couple seconds the mouse or the keyboard will stop working entirely then come back. I ran some tests and found that the ping from my desktop to my mac would be very high every third ping or so(1000+ ms) or sometimes even time out. If I ping my desktop from my mac the pings are all reasonably low. I believe that this is a power saving feature of Mavericks and I have found a way to get around it by continually pinging my router on my mac, keeping my wifi card from going to sleep. I'm using this right now to type this up with synergy and have had zero issues. Has anyone else ran into this issue and found a better solution? So far, I think my best bet would be to buy an ethernet adapter but I'd rather not have yet another cable running across my desk.

  Read the article

• Apple Service Diagnostic application on USB key?

  - by Matt 'Trouble' Esse

  I found the following in a text file, and I would like to use the Apple Service Diagnostic Application from a bootable USB key but I cannot find where to download it or set it up? Also is this free software or does it require a separate licence? It sounds like it would be a useful tool for diagnosing Mac problems. The Apple Service Diagnostic application is designed to run both EFI and Mac OS X tests from an external USB hard drive. Apple Service Diagnostic (EFI) runs low-level tests of the hardware directly and does not require Mac OS X, while Apple Service Diagnostic (OS) uses Mac OS X to run tests. Booting and Using the Apple Service Diagnostic Application - Before using Apple Service Diagnostic, disconnect any Ethernet network, USB, and audio cables. - With the USB hard drive containing ASD 3S123 plugged into a USB port, restart the computer and hold down the option key as the computer boots up into the Startup Manager. To run ASD (EFI) select the "ASD EFI 3S123" drive icon and press return or select it with a mouse click. To run ASD (OS) select the "ASD OS 3S123" drive icon and press return or select it with a mouse click. ASD (EFI) will load in 20-30 seconds; ASD (OS) will load in 2-3 minutes. - After running ASD (OS) or ASD (EFI), press the Restart button to restart the computer back into the normal startup volume, or hold down the option key to get back to the Startup Manager. ASD is no longer delivered as an image to be restored onto a DVD. ASD 3S117 and newer versions requires installation onto an external USB hard drive. For more information, please refer to the document "Installing ASD on a USB hard drive".

  Read the article

• Nginx ignores HTTP Authentication for WordPress login directory

  - by MrNerdy

  I am running WordPress in a subfolder of my domain for testing and development purposes on a VPS LEMP-stack. In order to password-protect the wp-login.php with an etxra layer, I used HTTP authentication for the wp-admin folder. The problem is that the http authentication is ignored. When the wp-login.php or wp-admin-folder is called, it goes directly to the normal WordPress-login. I installed everything from the command line in the following way: sudo apt-get install apache2-utils sudo htpasswd -c /var/www/bitmall/wp-admin/.htpasswd exampleuser New password: Re-type new password: Adding password for user exampleuser My Nginx configuration file looks like this: server { listen 80; root /var/www; index index.php index.html index.htm; server_name example.com; location / { try_files $uri $uri/ /index.html; } location /bitmall/wp-admin/ { auth_basic "Restricted Section"; auth_basic_user_file /var/www/bitmall/wp-admin/.htpasswd; } location ~ /\.ht { deny all; } error_page 404 /404.html; error_page 500 502 503 504 /50x.html; location = /50x.html { root /var/www; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } I would appreciate your advive on this.

  Read the article

• Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

  - by Sid

  I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

  Read the article

• OS X Client & Ubuntu Server - Best way for client to access files on server?

  - by Camsoft

  I've got a local development web server running Ubuntu. I also have an iMac running OS X 10.6 which I use a client and is my development machine. I'm currently have Samba server installed on my Ubuntu server. I have shares setup for all the website directories. I then use my Mac and Coda to edit the files via their shares. This generally works really well but I noticed that my Mac was writing loads of resource fork ._filename files everywhere. I found out the following about the files: These files are created on volumes that don't natively support full HFS file characteristics (e.g. ufs volumes, Windows fileshares, etc). When a Mac file is copied to such a volume, its data fork is stored under the file's regular name, and the additional HFS information (resource fork, type & creator codes, etc) is stored in a second file (in AppleDouble format), with a name that starts with "._". (These files are, of course, invisible as far as OS-X is concerned, but not to other OS's; this can sometimes be annoying...) Does anyone know of a way of sharing files between a Mac client and a Linux server that is most compantable between the two operation systems? Ideally it needs to support the HFS filesystem so that the resource forks are not created and it also needs to support the permissions between server and client.

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS. [migrated]

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

• How Do I Secure WordPress Blogs Against Elemento_pcx Exploit?

  - by Volomike

  I have a client who has several WordPress 2.9.2 blogs that he hosts. They are getting a deface kind of hack with the Elemento_pcx exploit somehow. It drops these files in the root folder of the blog: -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 default.htm -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 default.php -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.asp -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.aspx -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.htm -rw-r--r-- 1 userx userx 1459 Apr 16 04:25 index.html -rwxr-xr-x 1 userx userx 1459 Apr 16 04:25 index.php* It overwrites index.php. A keyword inside each file is "Elemento_pcx". It shows a white fist with a black background and the phrase "HACKED" in bold letters above it. We cannot determine how it gets in to do what it does. The wp-admin password isn't hard, but it's also not very easy either. I'll change it up a little to show you what the password sort of looks like: wviking10. Do you think it's using an engine to crack the password? If so, how come our server logs aren't flooded with wp-admin requests as it runs down a random password list? The wp-content folder has no changes inside it, but is run as chmod 777 because wp-cache required it. Also, the wp-content/cache folder is run as chmod 777 too.

  Read the article

• Synergy, OSX client, Windows 7 server - No mouse on client

  - by Majenko

  I have the following Synergy setup: +------------++------------++------------++------------+ | Mac || Win 7 || Ubuntu 1 || Ubuntu 2 | |c ||s ||c ||c | +------------++------------++------------++------------+ Mac: OS/X Tiger 10.4.11 (G3) Win 7: Windows 7 Ultimate x64 Ubuntu 1 & Ubuntu 2: Desktop 10.10 Now, everything works nicely between the Win7 server and the two Ubuntu machines. What doesn't work is the Mac. I am running the very latest Synergy (1.4.2, downloaded last night). As far as the Mac is concerned everything should be working fine: Synergy 1.4.2 Client on Darwin 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh Unable to connect to pasteboard. Clipboard sharing disabled. 2011-03-22 09:32:56.725 synergyc[406] Can't register screen saver connection 'com.apple.ScreenSaverDaemon' started client connecting to '192.168.0.202': 192.168.0.202:24800 connected to server entering screen leaving screen entering screen leaving screen But it's just not interacting with the display at all (mouse doesn't move, keyboard does nothing). I have tried running ktrace on synergyc and examining the dump, and the only clue I found was that it was trying to interact with the AccessibilityAPI which was disabled at first. Enabling Accessibility has had no effect whatsoever (it has only stopped the failure to open /var/db/.AccessibilityAPIEnabled in the ktrace dump) Anyone managed to get this to work in OS/X Tiger yet? I used to run the server on OS/X and have the windows / unix machines as clients, but as my Windows is now a laptop I'd like that to be the server.

  Read the article

• Openldap with ppolicy

  - by nitins

  We have working installation of OpenLDAP version 2.4 which is using shadowAccount attributes. I want to enable ppolicy overlays. I have gone through the steps provided at OpenLDAP and ppolicy howto. I have made the changes to slapd.conf and imported the password policy. On restart OpenLDAP is working fine and I can see the password policy when I do a ldapsearch. The user object looks like given below. # extended LDIF # # LDAPv3 # base <dc=xxxxx,dc=in> with scope subtree # filter: uid=testuser # requesting: ALL # # testuser, People, xxxxxx.in dn: uid=testuser,ou=People,dc=xxxxx,dc=in uid: testuser cn: testuser objectClass: account objectClass: posixAccount objectClass: top objectClass: shadowAccount shadowMax: 90 shadowWarning: 7 loginShell: /bin/bash uidNumber: 569 gidNumber: 1005 homeDirectory: /data/testuser userPassword:: xxxxxxxxxxxxx shadowLastChange: 15079 The password policy is given below. # default, policies, xxxxxx.in dn: cn=default,ou=policies,dc=xxxxxx,dc=in objectClass: top objectClass: device objectClass: pwdPolicy cn: default pwdAttribute: userPassword pwdMaxAge: 7776002 pwdExpireWarning: 432000 pwdInHistory: 0 pwdCheckQuality: 1 pwdMinLength: 8 pwdMaxFailure: 5 pwdLockout: TRUE pwdLockoutDuration: 900 pwdGraceAuthNLimit: 0 pwdFailureCountInterval: 0 pwdMustChange: TRUE pwdAllowUserChange: TRUE pwdSafeModify: FALSE I do not what should be done after this. How can the shadowAccount attributes be replaced with the password policy.

  Read the article

• Does Windows 7 Authenticate Cached Credentials on Startup

  - by Farray

  Problem I have a Windows domain user account that gets automatically locked-out semi-regularly. Troubleshooting Thus Far The only rule on the domain that should automatically lock an account is too many failed login attempts. I do not think anyone nefarious is trying to access my account. The problem started occurring after changing my password so I think it's a stored credential problem. Further to that, in the Event Viewer's System log I found Warnings from Security-Kerberos that says: The password stored in Credential Manager is invalid. This might be caused by the user changing the password from this computer or a different computer. To resolve this error, open Credential Manager in Control Panel, and reenter the password for the credential mydomain\myuser. I checked the Credential Manager and all it has are a few TERMSRV/servername credentials stored by Remote Desktop. I know which stored credential was incorrect, but it was stored for Remote Desktop access to a specific machine and was not being used (at least not by me) at the time of the warnings. The Security-Kerberos warning appears when the system was starting up (after a Windows Update reboot) and also appeared earlier this morning when nobody was logged into the machine. Clarification after SnOrfus answer: There was 1 set of invalid credentials that was stored for a terminal server. The rest of the credentials are known to be valid (used often & recently without issues). I logged on to the domain this morning without issue. I then ran windows update which rebooted the computer. After the restart, I couldn't log in (due to account being locked out). After unlocking & logging on to the domain, I checked Event Viewer which showed a problem with credentials after restarting. Since the only stored credentials (according to Credential Manager) are for terminal servers, why would there be a Credential problem on restart when remote desktop was not being used? Question Does anyone know if Windows 7 "randomly" checks the authentication of cached credentials?

  Read the article

• Windows 7: Setting up backup to an external hard drive on another computer on the network

  - by seansand

  I have an external hard drive connected to a Windows 7 (Home Edition) computer. I have another computer (with Windows 7 Ultimate), and I want to have the Windows 7 Ultimate back up to the same external hard drive, without having to disconnect and move the external hard drive from the Home Edition PC. When I get to the "Set up backup" dialog within Windows 7, it asks me where to save the backup. I select "Save on a network". However, when I enter "\\computername\harddrivename" under Browse, the "OK" button remains grayed out. The button remains grayed out unless I also enter a Username and Password under "Network credentials". However, the account I have on the other computer doesn't have a password for it. To un-gray out the button I must enter a fake password, allowing me to click "OK", but then obviously I get a "bad password" error. Does anyone know how to get around this problem? (Seems kind of ridiculous.) I made sure that the security settings with the external hard drive on the other computer are full access to Everyone, so permissions is not the problem. I also thought about using Homegroup instead of the regular security settings, but there is no obvious way to go about it that way, either.

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >