Search Results

Search found 14624 results on 585 pages for 'static'.

Page 297/585 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• IPcop Multiple WAN Subnets

  - by obsidian

  We have an IPcop firewall and have had no issues with it. We've had a block of 10 IP addresses from our colocation provider and have been able port forward from those to internal servers as needed. We've recently needed additional IPs and the colocation provider issued an additional block of 10. The problem: The 10 new IP addresses issued are in a different subnet with a different gateway. The question: How do I add the new gateway into IPcop? How do I make it so that any outbound traffic in response to any inbound traffic from a new IP go back out through the new gateway? I attempted to add a static route via the console using the following command: route add -net x.x.x.x gw x.x.x.x netmask 255.255.255.192 I also added the new IPs as aliases and setup port forwarding as I've done with the existing IP block. However, when I attempt to access a web server from an external workstation, it just times out. Thanks in advance for your assistance.

  Read the article

• HAProxy -- pause/queue all traffic without losing requests

  - by Marc

  I basically have the same problem as mentioned in this thread -- I would like to temporarily suspend all requests to all servers of a certain backend, so that I can upgrade the backend and the database it uses. Since this is a live system, I would like to queue up requests, and send them to the backend servers once they've been upgraded. Since I'm doing a database upgrade with the code change, I have to upgrade all backend servers simultaneously, so I can't just bring one down at a time. I tried using the tcp-request options combined with removing the static healthcheck file as mentioned in that thread, but had no luck. Setting the default "maxconn" value to 0 seems to pause and queue connections as desired, but then there seems to be no way to increase the value back to a positive number without restarting HAProxy, which kills all requests that had been queued up until that point. (The "hot-reconfiguration" options using -sf and -st start a new process, which doesn't seem to do what I want). Is what I'm trying to do possible?

  Read the article

• Java-JDBC-MySQL Error

  - by LeonardPeris

  I'm trying to get my java program to talk to a MySQL DB. So i did some reading and downloaded MySQL Connector/J. I've extracted it into my home directory ~. Here are the contents. user@hamster:~$ ls LoadDriver.class LoadDriver.java mysql-connector-java-5.1.18-bin.jar The contents of LoadDriver.java are user@hamster:~$ cat LoadDriver.java import java.sql.Connection; import java.sql.DriverManager; import java.sql.SQLException; // Notice, do not import com.mysql.jdbc.* // or you will have problems! public class LoadDriver { public static void main(String[] args) { try { // The newInstance() call is a work around for some // broken Java implementations Class.forName("com.mysql.jdbc.Driver").newInstance(); } catch (Exception ex) { System.out.println(ex); } } } The contents are the same from http://dev.mysql.com/doc/refman/5.1/en/connector-j-usagenotes-basic.html#connector-j-usagenotes-connect-drivermanager with the only change that the Exception is being printed to console in the catch block. I compile it as follows leonard@hamster:~$ javac LoadDriver.java When I try to execute it, the following is the ouput. leonard@hamster:~$ java LoadDriver java.lang.ClassNotFoundException: com.mysql.jdbc.Driver This output is consistent with the executing command, but when trying to run it with the prescribed CLASSPATH method I run into the following issue. leonard@hamster:~$ java -cp /home/leonard/mysql-connector-java-5.1.18-bin.jar LoadDriver Exception in thread "main" java.lang.NoClassDefFoundError: LoadDriver Caused by: java.lang.ClassNotFoundException: LoadDriver at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at java.lang.ClassLoader.loadClass(ClassLoader.java:321) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294) at java.lang.ClassLoader.loadClass(ClassLoader.java:266) Could not find the main class: LoadDriver. Program will exit. Am I missing something? How do I get MySQL's own code samples running.

  Read the article

• Does NMBD depend on DHCP?

  - by Atilla Filiz

  I am trying to debug a SMB share issue on an embedded Linux setup. Before diving into source code, I want to make sure this is not a configuration problem. So here is my case: Scenario-1: dhcp server enabled by default 1- system boots 2- udhcpcd server starts 3- smb server starts (smbd) 4- nmb server starts (nmbd) 5- smb share accessible Scenario-2: dhcp server disabled by default 1- system boots 2- smbd starts 3- nmbd fails to start 4- smb share inaccessible 5- $/etc/init.d/udhcpcd start 6- $/usr/sbin/nmbd still fails without an error message The client pc and the server device have static IP addresses in both cases. Is it possible that, NMBD somehow depends on a DHCP server at start?

  Read the article

• share one vpn connection through windows rras with other clients

  - by KTYP

  I'm having a Cisco VPN connection to access our branch office. Since several people using the VPN I'm planing to install the VPN client on one of our server and share it through RRAS to save the licenses (like site - to - site). I install RRAS on a windows 2008 R2 (svrw2k8r2) and made the static routes on client computers. I could able to ping to the VPN's IP on svrw2k8r2 server but they can't seems to connect to the servers in other branch through this setup. Below is my setup My Branch Server: svrw2k8r2 - Windows 2008 R2 IP: 192.168.40.100/24 VPN IP: 10.0.100.12/8 Clients Win7 IP: 192.168.40.101 - 110 / 24 Other Branch Servers IP:10.10.0.10-20/24

  Read the article

• What is the difference between String and string in C#

  - by SAMIR BHOGAYTA

  string : ------ The string type represents a sequence of zero or more Unicode characters. string is an alias for String in the .NET Framework. 'string' is the intrinsic C# datatype, and is an alias for the system provided type "System.String". The C# specification states that as a matter of style the keyword ('string') is preferred over the full system type name (System.String, or String). Although string is a reference type, the equality operators (== and !=) are defined to compare the values of string objects, not references. This makes testing for string equality more intuitive. For example: String : ------ A String object is called immutable (read-only) because its value cannot be modified once it has been created. Methods that appear to modify a String object actually return a new String object that contains the modification. If it is necessary to modify the actual contents of a string-like object Difference between string & String : ---------- ------- ------ - ------ the string is usually used for declaration while String is used for accessing static string methods we can use 'string' do declare fields, properties etc that use the predefined type 'string', since the C# specification tells me this is good style. we can use 'String' to use system-defined methods, such as String.Compare etc. They are originally defined on 'System.String', not 'string'. 'string' is just an alias in this case. we can also use 'String' or 'System.Int32' when communicating with other system, especially if they are CLR-compliant. I.e. - if I get data from elsewhere, I'd deserialize it into a System.Int32 rather than an 'int', if the origin by definition was something else than a C# system.

  Read the article

• Observable Collections

  - by SGWellens

  I didn't think it was possible, but .NET surprised me yet again with a cool feature I never knew existed: The ObservableCollection. This became available in .NET 3.0. In essence, an ObservableCollection is a collection with an event you can connect to. The event fires when the collection changes. As usual, working with the .NET classes is so ridiculously easy, it feels like cheating. The following is small test program to illustrate how the ObservableCollection works. To start, create an ObservableCollection and then store it in the Session object so it will persist between page post backs. I also added the code to pull it out of Session state when there is a page post back:   public partial class _Default : System.Web.UI.Page{    public ObservableCollection<int> MyInts;     // ---- Page_Load ------------------------------     protected void Page_Load(object sender, EventArgs e)    {        if (IsPostBack == false)        {            MyInts = new ObservableCollection<int>();            MyInts.CollectionChanged += CollectionChangedHandler;             Session["MyInts"] = MyInts;  // store for use between postbacks        }        else        {            MyInts = Session["MyInts"] as ObservableCollection<int>;        }    } Here's the event handler I hooked up to the ObservableCollection, it writes status strings to a ListBox. Note: The event handler fires in a different thread than the IIS process thread.     // ---- CollectionChangedHandler -----------------------------------    //    // Something changed in the Observable collection     public void CollectionChangedHandler(object sender, NotifyCollectionChangedEventArgs e)    {        // need to dig around to get the current page and control to write to:        // (because this is in a separate thread)        Page CurrentPage = System.Web.HttpContext.Current.Handler as Page;        ListBox LB = CurrentPage.FindControl("ListBoxHistory") as ListBox;         switch (e.Action)        {            case NotifyCollectionChangedAction.Add:                LB.Items.Add("Add: " + e.NewItems[0]);                               break;             case NotifyCollectionChangedAction.Remove:                LB.Items.Add("Remove: " + e.OldItems[0]);                break;             case NotifyCollectionChangedAction.Reset:                LB.Items.Add("Reset: ");                break;             default:                LB.Items.Add(e.Action.ToString());                break;                     }    }  Next, add some buttons and code to exercise the ObservableCollection:     <br />    <asp:Button ID="ButtonAdd" runat="server" Text="Add" OnClick="ButtonAdd_Click" />    <asp:Button ID="ButtonRemove" runat="server" Text="Remove" OnClick="ButtonRemove_Click" />    <asp:Button ID="ButtonReset" runat="server" Text="Reset" OnClick="ButtonReset_Click" />    <asp:Button ID="ButtonList" runat="server" Text="List" OnClick="ButtonList_Click" />    <br />    <asp:TextBox ID="TextBoxInt" runat="server" Width="51px"></asp:TextBox>    <br />    <asp:ListBox ID="ListBoxHistory" runat="server" Height="255px" Width="195px">    </asp:ListBox>    // ---- Add Button --------------------------------------     protected void ButtonAdd_Click(object sender, EventArgs e)    {        int Temp;        if (int.TryParse(TextBoxInt.Text, out Temp) == true)            MyInts.Add(Temp);    }     // ---- Remove Button --------------------------------------     protected void ButtonRemove_Click(object sender, EventArgs e)    {        int Temp;        if (int.TryParse(TextBoxInt.Text, out Temp) == true)            MyInts.Remove(Temp);    }     // ---- Button Reset -----------------------------------     protected void ButtonReset_Click(object sender, EventArgs e)    {        MyInts.Clear();    }     // ---- Button List --------------------------------------     protected void ButtonList_Click(object sender, EventArgs e)    {        ListBoxHistory.Items.Add("MyInts:");        foreach (int i in MyInts)        {            // a bit of tweaking to get the text to be indented            ListItem LI = new ListItem("&nbsp;&nbsp;" + i.ToString());            LI.Text = Server.HtmlDecode(LI.Text);            ListBoxHistory.Items.Add(LI);        }    } Here's what it looks like after entering some numbers and clicking some buttons: An interesting note is that I had to use: System.Web.HttpContext.Current.Response to write to a control on the page. As mentioned earlier, this implies that the notification event is in a thread separate from the IIS thread. Another interesting note: From the online help: Any public static (Shared in Visual Basic) members of this type are thread safe. Any instance members are not guaranteed to be thread safe What does that mean to Asp.Net developers? If you are going to share an ObservableCollection among different sessions, you'd better make it a static object. I hope someone finds this useful. Steve Wellens

  Read the article

• Set Error-Pages for all Applications in Tomcat

  - by user38511

  I'm trying to set up custom error pages in tomcat 6, because I don't want the default ones to show up. My error pages are static html, no jsp or anything dynamic. I know how to do this through the web.xml in each application but I'd prefere to setup the error pages only once for the entire server. I tried to add the following fragment to the global web.xml (in conf), but no matter what I add under location, it does not show. <error-page> <error-code>404</error-code> <location>/404.html</location> </error-page> What do I need to do to gobally define custom error pages? Thanks!

  Read the article

• IIS7 failover cluster across datacenters

  - by Scott

  Hello, I have servers in two different datacenters with each datacenter getting static IPs. What I would like to do is setup the servers as IIS7 servers and allowing them to failover from datacenter to datacenter with little (or preferably) no interruption. Servers on both sides are running Windows Server 2008 x64 with IIS7 (or 7.5 if needed). I am interested in how to point DNS traffic to the new datacenter without manual human intervention. For example: Datacenter A: IP: 192.168.1.115 Servers: Server 2008 x64 w/ IIS 7 Datacenter B: IP: 192.168.1.220 Servers: Server 2008 x64 w/ IIS 7 Other information: Domain Name: Example.org Domain DNS: 192.168.1.115 If Datacenter A connectivity went down (broken service line, etc.) how does the traffic know to route to Datacenter B on 192.168.1.220? Thanks, Scott

  Read the article

• ifcfg-eth* on CentOS 6.x, but for IPv6 only?

  - by Ray Hoffman

  Could someone kindly provide a skeleton ifcfg-eth0:[X] for creating an alias with a IPv6 address and no IPv4 address? Or, alternatively, what's the IPv6 equivalent of this: in /etc/sysconfig/network-scripts/ifcfg-eth0:1 DEVICE=eth0:1 ONBOOT=yes BOOTPROTO=static IPADDR=42.69.66.66 NETMASK=255.255.255.0 Or does this not even make sense in IPv6 space? I know that I can use, for example: IPV6INIT=yes IPV6ADDR=2600:4200::6900:6666:dead:beef But then do I need to specify that there is no IPv4 address associated with this alias? If so, how? And do I need to also specify the IPV6_DEFAULTGW? Or can it piggyback on the eth0 (unaliased) gateway, which is specifed, like with IPv4 aliases? EDIT: Answered my own question! The easiest way to accomplish this seems to be not to create an alias as with IPV4, but to specify, for example, IPV6ADDR_SECONDARIES=2600:4200::6900:6666:dead:beef on the script for the base interface, e.g. ifcfg-eth0.

  Read the article

• Isolating VMware virtual machines from the network

  - by jetboy

  I have: VMware Workstation 7 running on a Windows 7 box (with a single NIC), with multiple virtual machines running a range of OSs. The host box is connected to a WRT54G router running Tomato firmware. The router is acting as a wireless bridge to another WRT54G that's wired to my broadband modem. I can access the VMs externally via VNC using VMware's Remote Display. Over time I've had these running: a. Using NAT networking (single IP) with port forwarding on the router and a custom port in VMware for each VM. b. Using bridged networking with static IPs assigned to each VM via MAC address, and port forwarding on the router to each IP running with standard ports. Either way, the host box, and other physical machines on the network are accessible from the VMs. Is there a way to isolate the VMs from the rest of the network, but still maintain internet access and remote VNC to the VMs?

  Read the article

• Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

  - by dannote

  I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

  Read the article

• apache performance improvements and maxclients

  - by updog

  I know this has been asked a few (thousand) times around the internet but I was hoping someone whose in the know might be able to comment on my particular setup. I have a web server hosting one site (php/codeigniter) with a wordpress blog in a sub directory. The server has 2GB RAM, 3GHz CPU and I have offloaded the static assets to CloudFlare which is has reduced bandwidth for the actual server by almost 75%. The problem I have is when an email campaign is sent out that links to the site or blog, it slows down. Below is my settings in apache2.conf. Average apache process size is 80M and there is 1.5GB available for apache. <IfModule mpm_prefork_module> StartServers 8 MinSpareServers 5 MaxSpareServers 20 MaxClients 20 MaxRequestsPerChild 2000 </IfModule> I have already setup and installed apc and built some caching into the site and used w3totalcache on the blog. The number of concurrent users is around 2-300 when there is a campaign, are there any further optimisations before

  Read the article

• how to reference a ppp adapter in windows command?

  - by ollydbg23

  When using the windows command ipconfig /all, the result will show a PPP adapter followed by a long name closed with braces. It looks like the below image: When I try to set the DNS of my PPP adapter, I encounter this problem: netsh interface ip set dns "PPP adapter {1C43A7B0-1173-40E2-96D6-1DA6457786B0}" static 208.67.222.222 Invalid interface PPP adapter {1C43A7B0-1173-40E2-96D6-1DA6457786B0} specified. I have also used the pure string "{1C43A7B0-1173-40E2-96D6-1DA6457786B0}", but with the same result. How can I reference this PPP adapter, so that I can change its configured DNS and other settings? What does this long string mean? I do not have this PPP adapter connection on my "show all connections" panel, because I have a VPN app - when running it, this PPP adapter will be automatically created for me.

  Read the article

• How do I get information about the level to the player object?

  - by pangaea

  I have a design problem with my Player and Level class in my game. So below is a picture of the game. The problem is I don't want to move on the black space and only the white space. I know how to do this as all I need to do is get the check for the sf::Color::Black and I have methods to do this in the Level class. The problem is this piece of code void Game::input() { player.input(); } void Game::update() { (*level).update(); player.update(); } void Game::render() { (*level).render(); player.render(); } So as you there is a problem in that how do I get the map information from the Level class to the Player class. Now I was thinking if I made the Player position static and pass it into the Level as parameter in update I could do it. The problem is interaction. I don't know what to do. I could maybe make player go into the Level class. However, what if I want multiple levels? So I have big design problems that I'm trying to solve.

  Read the article

• Cocos2d-x v3 invalid conversion from 'cocos2d::Layer* [on hold]

  - by Hammerh5

  Hello guys I'm learning cocos2d-x v3 right but most of the code that I can find is to the version 2. My specific error is this one, when I try to compile my cocos2s-x 3 project this error shows. invalid conversion from 'cocos2d::Layer to Game* [-fpermisive]* What I want to do is create a new game scene in the following code: //Game.cpp #include "Game.h" Scene* Game::scene() { scene *sc = CCScene::create(); sc->setTag(TAG_GAME_SCENE); const Game *g = Game::create(); //Here is where the conversions fails. sc->addChild(g, 0, TAG_GAME_LAYER); return sc; } Of course this is my header file //Game.h #include "cocos2d.h" #include "Mole.h" #include "AppDelegate.h" using namespace cocos2d; class Game: public cocos2d::Layer { cocos2d::CCArray *moles; float timeBetweenMoles, timeElapsed, increaseMolesAtTime, increaseElapsed, lastMoleHiTime; int molesAtOnce; cocos2d::CCSize s; bool isPaused; public: CCString *missSound, *hitSound; static cocos2d::Scene* scene(); virtual bool init(); void showMole(); void initializeGame(); void onEnterTransitionDidFinish(); void onExit(); void onTouchesBegan(const std::vector<cocos2d::Touch *> &touches, cocos2d::Event *event); void tick(float dt); cocos2d::CCArray* getMoles(bool isUp); //LAYER_CREATE_FUNC(Game); }; #endif /* GAME_H_ */ I don't know what's wrong I suppose this code works fine in Cocos2d-x v2. It's maybe some changes in the C++ version ?

  Read the article

• How to structure a XML-based order form using ASP.NET

  - by Brendan

  First question here; please help me if I'm doing something wrong. I'm a graphic designer who's trying to teach himself ASP.NET/C#. My server-side background is PHP/WordPress and some ASP Classic, and when I do code I've hand-coded just about everything since I started learning HTML. So, as I've started to learn .NET, my code has been very manual and procedural. I'm now trying to create a really basic order form that pulls from an XML file to populate the form; there's an image, a title, a price, and selectable quantities. If I was making this form as a static HTML file, I'd have each field named manually and so on postback I could query each field to get the values. But I'm trying to do this dynamically so that I can add/remove items from the form and not have to change the code. In terms of displaying the XML, I rolled my own by loading XmlDocument and using XmlNodeList and a bunch of foreach loops to get things displayed. Then, I learned about <asp:XmlDataSource> and <asp:Repeater>, which made displaying the XML simpler by a large margin. However, I've had a really hard time getting the data that's been submitted on postback (it was implied on SO that there are better ways to get data than nested RepeaterItems). So, what I've learned so far is that you can do things a bunch of different ways in .NET. that's why I thought it'd be good to ask for answers regarding the best way to use ASP.NET to display a XML document and dynamically capture the data that's submitted. Any help is appreciated! I'm using Notepad++ to code .NET 2.0.

  Read the article

• KVM virtual machine networking, NAT and bridge together

  - by stoqlt

  I have two running KVM guests on an Ubuntu (Lucid) host. One of them uses the simplest NAT method, and DHCP inside. The other uses the bridge method and static IP inside. Both work fine. Can I mix the networking methods? I'd like to create some set of scripts which used the local 192.168.122.x address, no matter if the guest has or not has an additional bridged LAN interface. Having eth0 and eth1 interfaces inside would be fine. Thanks for your interest.

  Read the article

• How to set Virtualbox appliance as webdev portable sollution?

  - by tenshimsm

  I just want to set a a Virtualbox virtual appliance to make it portable. Meaning that I'll enable a network config which will not need to be changed when I am using my laptop in a different network. I want the virtual machine to have internet access to keep it updated and be able to always have direct access from host using, for example, the IP 10.0.2.100 even when I am in a 192.168.0.1 network. So the first virtual network adapter will have a static ip (10.0.2.100) and the second will receive it from the DHCP. I don't know if 2 virtual adapters are needed or just one to accomplish that.

  Read the article

• Allow Incoming Responses from Curl On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms Thanks in Advance

  Read the article

• What am I (a beginner) losing, by choosing Cherokee over Apache for serving dynamic content?

  - by Bad Learner

  I am a complete beginner and am planning to setup a photo sharing site. This is the setup I am planning, basically for a start - - Cherokee (instead of Apache) for serving dynamic content (python-based application), and Nginx for serving static files. Since, I am a beginner, what have I, to lose? So, can someone, from your experience, please tell me, what I'd lose by choosing Cherokee over Apache for serving dynamic content in PHP/Python/whatever? Anything other than the fact that there's lot of documentation, many people who can help when there's an issue etc as Apache is well established and the most popular web server? Again, my intention is not to spurt a flame war here. Just wanted to know if Cherokee would be better than Apache in terms of performance, reliability, and speed, when it matters (peak load times). Also, I heard it's a lot faster than Apache in serving dynamic content, is it true?

  Read the article

• Deferred vs Immediate execution in Linq

  - by Jalpesh P. Vadgama

  In this post, We are going to learn about Deferred vs Immediate execution in Linq.  There an interesting variations how Linq operators executes and in this post we are going to learn both Deferred execution and immediate execution. What is Deferred Execution? In the Deferred execution query will be executed and evaluated at the time of query variables usage. Let’s take an example to understand Deferred Execution better. Example: Following is a code for that. using System; using System.Collections.Generic; using System.Linq; namespace ConsoleApplication1 { class Program { static void Main(string[] args) { var customers = new List<Customer>( new[] { new Customer{FirstName = "Jalpesh",LastName = "Vadgama"}, new Customer{FirstName = "Vishal",LastName = "Vadgama"}, new Customer{FirstName = "Tushar",LastName = "Maru"} } ); var newCustomers = customers.Where(c => c.LastName == "Vadgama"); customers.Add(new Customer {FirstName = "Teerth", LastName = "Vadgama"}); foreach (var c in newCustomers) { Console.WriteLine(c.FirstName); } } public class Customer { public string FirstName { get; set; } public string LastName { get; set; } } } } More on my personal blog @www.dotnetjalps.com

  Read the article

• Add IP Address without Plesk

  - by CrackerJack9

  I have an dedicated unmanaged server and added a few IP addresses to it (allocated), and the only information my hosting company has provided is instructions on how to use Plesk to Add IP Addresses. However, one of the first things I did was uninstall Plesk (for numerous reasons). Does anyone know what exactly Plesk does when you "Add IP Address"? Does it just create an alias on the default interface (I currently only have one and the loopback)? I can manage that myself without Plesk, but I was hoping someone might know if there is anything else Plesk does. I also have DHCP Client running (eth0 is static), not sure why my hosting company put that there either, and not sure if they're related.

  Read the article

• How would I setup reverse DNS for 2 email servers?

  - by Solignis

  I have an interesting DNS question (well interesting to me atleast). I just installed an hmail server in our remote office to act as an MX backup in the event our exchange server goes down. The 2 host names are mail.campbellsurvey.com mail2.campbellsurvey.com mail points to the address 98.XXX.91.XXX mail2 points to the address 70.XXX.190.XXX How would I setup a PTR record on the ISP end to reflect both hostnames? Does the PTR have to point to EXACTLY mail.campbellsurvey.com or can it point to just campbellsurvey.com? because right now anything passing through the primary static address in our pool (the one used for standard internet) is identified as mail.campbellsurvey.com. My only idea to fix this was to move the mail server to the next available address and give it only it the name mail.campbellsurvey.com but I wanted to see if there was another way. Thanks in advance.

  Read the article

• Custom/personal dyndns solution?

  - by Eddie Parker

  Hey: I can't think of how to make this work, but it seems like something that should be doable.. I currently own my own domain, and have been using dyndns.com's "custom DNS" to allow me to redirect 'example.com' to my website at home, which is on a dynamic IP. I've now switched over to a VPS solution which hosts my website and allows me root access to a box (me likey), which will now host "example.com" on a static IP. My question is, is it possible for me to somehow make "home.example.com" route to my box at home? Is there any software available that could automate updates to the DNS for this? Ideally I'd like not to pay a service if possible, but if that's the only way then I suppose I'll have to go that way. Thanks!

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >