Search Results

Search found 70459 results on 2819 pages for 'file sync'.

Page 298/2819 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

  • No device file for partition on logical volume (Linux LVM)

    - by Brian
    I created a logical volume (scandata) containing a single ext3 partition. It is the only logical volume in its volume group (case4t). Said volume group is comprised by 3 physical volumes, which are three primary partitions on a single block device (/dev/sdb). When I created it, I could mount the partition via the block device /dev/mapper/case4t-scandatap1. Since last reboot the aforementioned block device file has disappeared. It may be of note -- I'm not sure -- that my superior (a college professor) had prompted this reboot by running sudo chmod -R [his name] /usr/bin, which obliterated all suid in its path, preventing the both of us from sudo-ing. That issue has been (temporarily) rectified via this operation. Now I'll cut the chatter and get started with the terminal dumps: $ sudo pvs; sudo vgs; sudo lvs Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Scanning for physical volume names PV VG Fmt Attr PSize PFree /dev/sdb1 case4t lvm2 a- 819.32G 0 /dev/sdb2 case4t lvm2 a- 866.40G 0 /dev/sdb3 case4t lvm2 a- 47.09G 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" VG #PV #LV #SN Attr VSize VFree case4t 3 1 0 wz--n- 1.69T 0 Wiping internal VG cache Logging initialised at Sat Jan 8 11:42:34 2011 Set umask to 0077 Finding all logical volumes LV VG Attr LSize Origin Snap% Move Log Copy% Convert scandata case4t -wi-a- 1.69T Wiping internal VG cache $ sudo vgchange -a y Logging initialised at Sat Jan 8 11:43:14 2011 Set umask to 0077 Finding all volume groups Finding volume group "case4t" 1 logical volume(s) in volume group "case4t" already active 1 existing logical volume(s) in volume group "case4t" monitored Found volume group "case4t" Activated logical volumes in volume group "case4t" 1 logical volume(s) in volume group "case4t" now active Wiping internal VG cache $ ls /dev | grep case4t case4t $ ls /dev/mapper case4t-scandata control $ sudo fdisk -l /dev/case4t/scandata Disk /dev/case4t/scandata: 1860.5 GB, 1860584865792 bytes 255 heads, 63 sectors/track, 226203 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00049bf5 Device Boot Start End Blocks Id System /dev/case4t/scandata1 1 226203 1816975566 83 Linux $ sudo parted /dev/case4t/scandata print Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/case4t-scandata: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 1861GB 1861GB primary ext3 $ sudo fdisk -l /dev/sdb Disk /dev/sdb: 1860.5 GB, 1860593254400 bytes 255 heads, 63 sectors/track, 226204 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000081 Device Boot Start End Blocks Id System /dev/sdb1 1 106955 859116006 83 Linux /dev/sdb2 113103 226204 908491815 83 Linux /dev/sdb3 106956 113102 49375777+ 83 Linux Partition table entries are not in disk order $ sudo parted /dev/sdb print Model: DELL PERC 6/i (scsi) Disk /dev/sdb: 1861GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 880GB 880GB primary reiserfs 3 880GB 930GB 50.6GB primary 2 930GB 1861GB 930GB primary I find it a bit strange that partition one above is said to be reiserfs, or if it matters -- it was previously reiserfs, but LVM recognizes it as a PV. To reiterate, neither /dev/mapper/case4t-scandatap1 (which I had used previously) nor /dev/case4t/scandata1 (as printed by fdisk) exists. And /dev/case4t/scandata (no partition number) cannot be mounted: $sudo mount -t ext3 /dev/case4t/scandata /mnt/new mount: wrong fs type, bad option, bad superblock on /dev/mapper/case4t-scandata, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so All I get on syslog is: [170059.538137] VFS: Can't find ext3 filesystem on dev dm-0. Thanks in advance for any help you can offer, Brian P.S. I am on Ubuntu GNU/Linux 2.6.28-11-server (Jaunty) (out of date, I know -- that's on the laundry list).

    Read the article

  • Does saving my progress on a U1-synced file/folder put unneccesary strain on the servers?

    - by Chauncellor
    I love Ubuntu One and I use it all the time. I have my documents and music composition folders set to sync. It's been a real boon. However, sometimes I feel that constantly saving my progress forces the file to sync dozens and dozens of times to the servers. It seems wasteful to me so I've been disconnecting U1 until I'm finished working on a project. Is this an unnecessary action that I am taking? I know it's using Amazon's storage but I'm still paranoid that I'm costing Canonical money when I constantly save my progress.

    Read the article

  • Accessing controls of .aspx file in .aspx.cs without any declaration.!!??

    I am able to access the controls of ".aspx" file in ".aspx.cs" directly without any declaration in ".aspx.cs" or in designer.cs. How is this possible? This is happeing only if I open website as using File System. Create a new ASP.NET web site application with Visual Studio 2008. So following three files will be created automatically              "Default.aspx",              "Default.aspx.cs"              "Default.designer.cs" Now Delete "Default.designer.cs" perminently. Just create a button in Default.aspx file    <asp:Button runat="server" Text="Save Plan" ID="btnSave" />   Close the Solution and open the website as File System.               File -> Open Web Site -> File System -> Select Web Site Folder and Open the project.                   Now btnSave is automatically recognized in Default.aspx.cs without any declaration in Default.aspx.cs as bellow                            System.Web.UI.WebControls.Button btnSave; How btnSave is being recognized by .cs file without defining it anywhere as an object of System.Web.UI.WebControls.Button? Note: This happens only if you open Web Site from File System.           and No Declaration at all for btnSave. Please refer this article on this. span.fullpost {display:none;}

    Read the article

  • Why do we need to include the .h while everything works when including only the .cpp file?

    - by reaffer
    Why do we need to include both the .h and .cpp files , while we can make it works with making just a .cpp file and then including it . For example, Creating a file.h containing declarations, then creating a file.cpp containing definitions and including both on the main.cpp. Or, creating a file.cpp containing declaration/definitions ( no prototypes ) Including it on the main.cpp. Both worked for me , but still can't the difference since i do not have a background on the compiling and linking process .

    Read the article

  • best way to import 500MB csv file into mysql database?

    - by mars
    I have a 500MB csv file that needs to be imported into my mysql database. I've made a php file where i can upload the csv file and it analyses the fields n stuff and does the actual importing. but it can only handle small fiels max 5mb. so that's a 100 files and actually pretty slow(uploading) is there another way? I have to repeat this process every month because the data in the file changes every month it's about 12 000 000 lines :D

    Read the article

  • How can I do individual file encryption on Dropbox?

    - by Scaine
    I'd like to set a single directory inside Dropbox in which files are encrypted on a file-by-file basis. At the moment, I use a 2Mb Truecrypt container inside my Dropbox which I then have to mount manually, access/change the files within, then unmount manually. At that point, the entire 2Mb uploads to Dropbox. This is a pain for a number of reasons : Dropbox sync will only occur when the Truecrypt container is unmounted, because Dropbox only syncs files that aren't locked and mounting a container locks it. A single byte change to one file inside that container results in the whole 2Mb being uploaded again. It doesn't scale - I was originally using a 10Mb container, but obviously the bigger the container, the longer it takes to sync when it's unmounted. I was wondering if I can somehow use LUKS to implement file-by-file encryption to get round the "container" issues.

    Read the article

  • Accessing controls of .aspx file in .aspx.cs without any declaration.!!??

    I am able to access the controls of ".aspx" file in ".aspx.cs" directly without any declaration in ".aspx.cs" or in designer.cs. How is this possible? This is happeing only if I open website as using File System. Create a new ASP.NET web site application with Visual Studio 2008. So following three files will be created automatically              "Default.aspx",              "Default.aspx.cs"              "Default.designer.cs" Now Delete "Default.designer.cs" perminently. Just create a button in Default.aspx file    <asp:Button runat="server" Text="Save Plan" ID="btnSave" />   Close the Solution and open the website as File System.               File -> Open Web Site -> File System -> Select Web Site Folder and Open the project.                   Now btnSave is automatically recognized in Default.aspx.cs without any declaration in Default.aspx.cs as bellow                            System.Web.UI.WebControls.Button btnSave; How btnSave is being recognized by .cs file without defining it anywhere as an object of System.Web.UI.WebControls.Button? Note: This happens only if you open Web Site from File System.           and No Declaration at all for btnSave. Please refer this article on this. span.fullpost {display:none;}

    Read the article

  • Temp file folder full, but clearing it out doesn't seem to work

    - by Vegar Westerlund
    I got this error on our build server: MSB6003: The specified task executable could not be run. MSB5003: Failed to create a temporary file. Temporary files folder is full or its path is incorrect. The directory name is invalid. [C:\Users\swdev_build\bamboo-agent-home\xml-data\build-dir\XXXX-ZZZZZZ-JOB1\build.xml] This was when trying to run and msbuild task to run our test suite. Using the power of google it seemed that this should be a problem with the %TEMP% folder running out of tmp file names apparently because a 4 digit hex name is used (for a total of 65535 temporary files). The problem is that the error persist, even after going into the %TEMP% folder and deleting everything before rebooting the machine. Does anyone know how to fix the issue and more importantly how to prevent it from happening again? What is the preferred way of cleaning up this temp files? Make it a part of the build process? Update: Actually I cleared the TEMP folder of the only local user, but since the build server is running as the SYSTEM user, it probably has some temp folder somewhere else.

    Read the article

  • IIS6 Wildcard Mapping to ASP.NET - no file extension results in IIS 404

    - by Ian Robinson
    I'm trying to perform what I understand to be a relatively simple task. I'd like to remove the extensions from the URLs on my website. I have the proper set up in my application to handle and rewrite the URLs - the trouble is I can't get past IIS to actually get to my application without the extensions. The details: I'm running IIS6 on Windows Server 2003. I've gone into the web site for my application, gone to the home directory tab, clicked "Configuration" and added a wildcard map to the following file: c:\windows\microsoft.net\framework\v2.0.50727\aspnet_isapi.dll Which I verified is the same as what is used above in the application extensions portion by .ascx, etc. If I navigate to http://mywebsite.com/Blogs the result is as follows: HTTP/1.1 404 Not Found Content-Length: 1635 Content-Type: text/html Server: Microsoft-IIS/6.0 X-Powered-By: ASP.NET Date: Thu, 14 Jan 2010 15:04:49 GMT Which seems to be a standard IIS 404 message. If I navigate to http://mywebsite.com/Blogs.aspx I get my ASP.NET app.... How can I troubleshoot this? I feel like I've double checked everything a dozen times but to no avail. I must be missing something obvious. Update: Here are the exact instructions given by the asp.net url rewriter that I'm using: IIS 6.0 - Windows 2003 Server open property page for website / virtual directory. click the 'home directory' tab click the 'configuration' button, select the 'mappings' tab click 'insert' next to the 'Wildcard application maps' section browse to the aspnet_isapi.dll (normally at c:\windows\microsoft.net\framework\v2.0.50727\aspnet_isapi.dll) Ensure that 'check that file exists' is unchecked Click OK, OK, OK to close and apply changes Update 2: I have yet to find a resolution for this. The application does not seem to be receiving the request from IIS, any further ideas?

    Read the article

  • Unable to execute gs program: No such file or directory

    - by Imran
    I've setup CUPS + Avahi on my NAS box in order to enable AirPrint with my existing network printer. Printing a test page via CUPS and printing us lp works fine, and I am able to see my printer on the printer list on my iOS device. However when sending a print job from my iOS device the printer status is set to paused and doesnt print anything. When checking the error_logs I have found this line which I believe is causing the error. D [04/Sep/2012:03:20:25 +0100] [Job 11] Started filter gs (PID 7485) D [04/Sep/2012:03:20:25 +0100] [Job 11] Started filter pstops (PID 7486) D [04/Sep/2012:03:20:25 +0100] [Job 11] Set job-printer-state-message to "Unable to execute gs program: No such file or directory", current level=ERROR D [04/Sep/2012:03:20:25 +0100] [Job 11] PID 7485 (gs) stopped with status 1! D [04/Sep/2012:03:20:25 +0100] [Job 11] PID 7486 (pstops) stopped with status 1! D [04/Sep/2012:03:20:25 +0100] [Job 11] Backend returned status 1 (failed) D [04/Sep/2012:03:20:25 +0100] [Job 11] Printer stopped due to backend errors; please consult the error_log file for details. I have installed Ghostscript, so I'm not quite sure why its saying its unable to execute the program, unless there are configurations for GS that I havent set yet. Any ideas?

    Read the article

  • Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

    - by user8804
    We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

    Read the article

  • Performance of file operations on thousands of files on NTFS vs HFS, ext3, others

    - by peterjmag
    [Crossposted from my Ask HN post. Feel free to close it if the question's too broad for superuser.] This is something I've been curious about for years, but I've never found any good discussions on the topic. Of course, my Google-fu might just be failing me... I often deal with projects involving thousands of relatively small files. This means that I'm frequently performing operations on all of those files or a large subset of them—copying the project folder elsewhere, deleting a bunch of temporary files, etc. Of all the machines I've worked on over the years, I've noticed that NTFS handles these tasks consistently slower than HFS on a Mac or ext3/ext4 on a Linux box. However, as far as I can tell, the raw throughput isn't actually slower on NTFS (at least not significantly), but the delay between each individual file is just a tiny bit longer. That little delay really adds up for thousands of files. (Side note: From what I've read, this is one of the reasons git is such a pain on Windows, since it relies so heavily on the file system for its object database.) Granted, my evidence is merely anecdotal—I don't currently have any real performance numbers, but it's something that I'd love to test further (perhaps with a Mac dual-booting into Windows). Still, my geekiness insists that someone out there already has. Can anyone explain this, or perhaps point me in the right direction to research it further myself?

    Read the article

  • Preventing Windows version of Vim from destroying other file systems permissions

    - by dborba
    I am currently using the windows version of gVim to edit source files on a networked drive mapped to a linux system, as well as local files created in cygwin. The problem is that the windows version of gVim destroys the original file permissions on the respective systems. IE: Files on cygwin are defaulted to 077. When edited by the windows version of vim they are saved as 777.This problem doesn't even occur when using ms-notepad (as well as all other editors I've tried), so I am not quite sure why gVim does it. A possible solution would be to use cygwin's gVim for everything, but that's rather cumbersome as it requires running an x11 environment to support it, and it causes some problems when running some commands from within gVim (or vim for that matter) when working on the networked drive. Any ideas how I might be able to maintain the existing file permissions? Edit: This morning while on a different machine the problem with cygwin did not occur. Cygwin & gVim were the same version, however the other machine is running WinXP while the machine the problem is occurring on runs Win7.

    Read the article

  • Openconnect for Cisco VPN doesn't recognize private key file - asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag

    - by Alexander Skwar
    I'm trying to use my Synology DS212 NAS box also act as VPN gateway to my companies VPN. Sadly, they only use Cisco ASA and to complicate stuff even further, we've got to use personal certificates (which is of course more secure, but more complicate to get going…). So I compiled OpenConnect v4.06 from http://www.infradead.org/openconnect/. As a very basic test, I tried to build a connection by manually invoking openconnect, passing along the key and cert files, like so: /lib/ld-linux.so.3 --library-path /opt/lib \ /opt/openconnect/sbin/openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 It fails :( Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Using client certificate '/[email protected]/OU=Company VPN' 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Loading private key failed (see above errors) Loading certificate failed. Aborting. Failed to open HTTPS connection to <ip> Failed to obtain WebVPN cookie When I run the same command with the same cert/key files on a Ubuntu 12.04 box, it works: openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Extra cert from cafile: '/CN=Company AG VPN CA/O=Company AG/L=Zurich/ST=ZH/C=CH' SSL negotiation with <ip> Server certificate verify failed: self signed certificate Certificate from VPN server "<ip>" failed verification. Reason: self signed certificate Enter 'yes' to accept, 'no' to abort; anything else to view: yes Connected to HTTPS on <ip> GET https://<ip>/ […] Well… The error on the NAS is this: 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Any ideas, what's causing this? On Syno, I use OpenConnect 4.06. On Ubuntu, I just compiled and installed to a custom location OpenConnect 4.06 as well. Thanks, Alexander

    Read the article

  • stunnel not working - stunnel.pem: No such file or directory

    - by Marronsuisse
    I am trying to install stunnel on an amazon LINUX machine. (i want to configure postfix so that it sends its emails through amazon ses) I first tried to install from the tar.gz package download from http://www.stunnel.org and installed with the commands: ./configure make make install but than the stunnel command was still not found. Then I installed with yum install stunnel. But now when I try I get: sudo stunnel 2012.06.23 06:51:53 LOG7[20071:3078289200]: Snagged 64 random bytes from /root/.rnd 2012.06.23 06:51:53 LOG7[20071:3078289200]: Wrote 1024 new random bytes to /root/.rnd 2012.06.23 06:51:53 LOG7[20071:3078289200]: RAND_status claims sufficient entropy for the PRNG 2012.06.23 06:51:53 LOG7[20071:3078289200]: PRNG seeded successfully 2012.06.23 06:51:53 LOG3[20071:3078289200]: stunnel.pem: No such file or directory (2) So it seems there is still a problem with the install. When I use the locate stunnel command, I see files a bit everywhere. How can I do to have a clean install of stunnel? Edit: i was following this procedure: http://docs.amazonwebservices.com/ses/latest/DeveloperGuide/SMTP.MTAs.SecureTunnel.html when I got stuck at point 5 and got the stunnel.pem: No such file or directory message.

    Read the article

  • Mystery undeletable file

    - by Hugh Allen
    I can't delete C:\Config.Msi\75ce84f.rbf. it's not readonly, system or hidden it's not in use by another process (according to Process Explorer) the NT security permissions aren't the problem either - I am the owner and have Full Control ; as a double-check, the Effective Permissions tab shows that I have permission to delete. Yet trying to delete the file gives "Access is Denied" from both Explorer and cmd. I can however rename it or move it to another folder on the same drive. I can also read it and Virustotal says it's clean which is what I would expect (it's just a Windows Installer temp file - a copy of some DLL I think). The relevant line from Process Monitor is: 6:52:14.3726983 PM 112 Explorer.EXE SetDispositionInformationFile C:\Config.Msi\75ce84f.rbf CANNOT DELETE Delete: True Write 1232 Background: I'm using XP SP2. I recently repaired my Adobe Reader installation to make it the default browser plugin again instead of Foxit. (there seems to be no UI to do it otherwise?) So the installer did its thing and then asked to reboot. As is my habit when rebooting is inconvenient I declined the offer and ran pendmoves to find out what files the installer had scheduled to move / delete. It wanted to delete two files with .rbf extension (rollback files) located in C:\Config.msi\. (this applies to both even though I've been speaking about one). So I tried to delete them manually and couldn't. Does anyone have any ideas what could be preventing deletion? (and I don't think it's malware even though I'm not running AV at the moment)

    Read the article

  • Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

    - by jesse-mcdowell
    We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

    Read the article

  • PHP/Linux File Permissions

    - by user1733435
    May I ask a question about file permission. I set up Ubuntu server where Apache got running. I have simple php upload form and able to upload file to /var/www/site/uploads as follows. sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 1736 drwxrwxrwx 2 www-data www-data 4096 Oct 18 02:53 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 00:42 ../ -rw-r--r-- 1 www-data www-data 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 www-data www-data 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 www-data www-data 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg Is there anyway to upload files and they show up as -rw-r--r-- 1 sandbox sandbox 145998 Oct 18 02:53 3d wallpaper pic.jpg -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 02:53 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 1451489 Oct 18 02:53 6453_3d_landscape_hd_wallpapers_green.jpg so that I could straight away feed them to waiting/running shell script. Right now waiting script(move,checksums,rename,resize,etc) unable to do anything to uploaded files with attributes of www-data. If I just do as local account, such as sandbox@sandbox-virtual-machine:/var/www/site/uploads$touch testfile then the script is able to run as I would like to. Any suggestion would be grateful,thanks in advance as well. Thanks for everyone giving help to me,that I was able to progress. Now I am close to getting solved and append the output sandbox@sandbox-virtual-machine:/var/www/site/uploads$ ll total 388 drwxrwxrwx 2 www-data www-data 4096 Oct 18 04:22 ./ drwxrwxrwx 3 sandbox sandbox 4096 Oct 18 04:17 ../ -rw-r--r-- 1 sandbox sandbox 166947 Oct 18 04:21 3D Wallpapers 9.jpg -rw-r--r-- 1 sandbox sandbox 219808 Oct 18 04:20 adafruit_pi.png -rw-rw-r-- 1 sandbox sandbox 0 Oct 18 04:22 test How may I set permission to uploaded files like 'test' only w difference in middle group. Such as adafruit_pi.png Vs test. Which statement shall I insert to php code,please?

    Read the article

  • Everyone can access my Windows 7 Homegroup file shares - Even Windows XP computers

    - by Adrian Grigore
    I have 3 computers in my network, two running Windows 7 and one running Windows XP. I've set up a homegroup on both Windows 7 computers. Also, all computers are in the same Workgroup. The problem is that one of the Windows 7 computers makes all shares accessible to the entire Workgroup instead of just sharing to the Homegroup as it should be. I created the file share in Windows 7 via right-click in the explorer, then click on "Share For" - "Homegroup (Read/Write)" (translated from German, so the actual wording may be different). Also, when I look at the file sharing properties of that folder, Windows Explorer informs me that Users must have a valid account and password for this Computer to access drive shares. Unfortunately this is not true. Being in the same Workgroup is enough to get access. Homegroup restrictions work as expected on my other Windows 7 computer. When trying to browse those shares from the XP computer, I get a dialog asking for a login and password. What might cause homegroup restrictions to fail and how can I fix this?

    Read the article

  • VirtualHost not using correct SSL certificate file

    - by Shawn Welch
    I got a doozy of a setup with my virtual hosts and SSL. I found the problem, I need a solution. The problem is, the way I have my virtual hosts and server names setup, the LAST VirtualHost directive is associating the SSL certificate file with the ServerName regardless of IP address or ServerAlias. In this case, SSL on www.site1.com is using the cert file that is established on the last VirtualHost; www.site2.com. Is this how it is supposed to work? This seems to be happening because both of them are using the same ServerName; but I wouldn't think this would be a problem. I am specifically using the same ServerName for a purpose and I really can't change that. So I need a good fix for this. Yes, I could buy another UCC SSL and have them both on it but I have already done that; these are actually UCC SSLs already. They just so happen to be two different UCC SSLs. <VirtualHost 11.22.33.44:80> ServerName somename ServerAlias www.site1.com UseCanonicalName On RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 11.22.33.44:443> ServerName somename ServerAlias www.site1.com UseCanonicalName On SSLEngine on SSLCertificateFile /usr/local/apache/conf/ssl.crt/cert1.crt SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/cert1.key SSLCertificateChainFile /usr/local/apache/conf/chain/gd_bundle.crt RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 55.66.77.88:80> ServerName somename ServerAlias www.site2.com UseCanonicalName On RewriteEngine On RewriteOptions Inherit </VirtualHost> <VirtualHost 55.66.77.88:443> ServerName somename ServerAlias www.site2.com UseCanonicalName On SSLEngine on SSLCertificateFile /usr/local/apache/conf/ssl.crt/cert2.crt SSLCertificateKeyFile /usr/local/apache/conf/ssl.key/cert2.key SSLCertificateChainFile /usr/local/apache/conf/chain/gd_bundle.crt RewriteEngine On RewriteOptions Inherit </VirtualHost>

    Read the article

  • Problems with image/file upload in MediaWiki on Windows 2008 Server R2, using wrong temp directory

    - by Lasse V. Karlsen
    I have installed MediaWiki 1.15.2 under IIS as per the MediaWiki installation instructions for Windows 2008 Server. I have configured PHP to use a specific temp directory: upload_tmp_dir="C:\php\uploadtemp" I have specified that MediaWiki is allowed to upload: $wgEnableUploads = true; But when I try to upload an image, I get this error message in my browser: Internal error Could not find file "C:\Windows\Temp\php1AEA.tmp". Retrying will simply give me a new filename, but in the same location. The directory does not have any php* files in it, but since they're "temporary", they might be gone in a flash before Windows Explorer is able to show them so that might be a red herring. I've googled for this, and the most promising lead I found was on this page: Image upload problem - Is this bug fixed?, but since the text says "a bugfix was posted on the bug-report page", but provides no link to which bug page this relates to (php or mediawiki) nor the actual bug report, I've not found conclusively the bug report in question so that didn't help me much. Lots of pages indicates that this is a permission issue, so I tried setting permissions on c:\windows\temp as Modify by Everyone, still no dice. I tried changing the two system environment variables TEMP and TMP to point to C:\Temp instead, but MediaWiki still complains about not finding the file in C:\Windows\Temp. Note that I don't care a lot about where the files will actually be stored temporarily, so c:\windows\temp is fine by me. I do, however, care about them actually being uploaded correctly. Does anyone know of a fix, have any leads I can follow, or whatnot? The server is running Windows 2008 Server R2, all patches installed, and the PHP installed is 5.3.2, using IIS FastCGI.

    Read the article

  • mac terminal run a file of commands

    - by Ilan Tal
    I am coming from Linux and trying to get a Mac to do what I want it to do. The question is what is the best tool to use. I want to mount (unmount) several remote disks. If I go into a terminal I can do the trick by mount -t smbfs //username:pass@addr /Users/me/RemoteDisks/mnt1 Since I want to mount several disks I would like to put all of the information into a file, store it in Documents/subfolder and make a link to it on the desktop (or somewhere better, if there is a better place). At the moment I have manually run the appropriate command in the terminal and the remote disk is mounted and I see its contents. What I need is a one click method to run a file to mount all the disks. I tried Apple script but that didn't like my commands. I don't know exactly what it is expecting to see and perhaps Apple script is the wrong tool. I have no problems in Linux, but the Mac is new to me and I don't know what I should be using. Thanks, Ilan

    Read the article

  • Tell VLC where to look for plugins.dat file

    - by puk
    I am trying to build vlc from source (I will include installation script below), but when I try to run vlc I get the following error main libvlc warning: cannot read /home/user/downloads/vlc3/vlc/src/.libs/vlc/plugins/plugins.dat (No such file or directory) Why is it even looking in that non existant directory? The plugins.dat file is in /usr/lib/vlc/plugins/. I tried export VLC_PLUGIN_PATH=/usr/lib/vlc/plugins/ But it still looks in that non existent path. I can create a symbolic link, but that is a terrible way to do it. If in 6 months I delete my downloads folder, all of a sudden my vlc will break. Here is the script I am running to install: ./configure --enable-rpi-omxil --enable-dvbpsi --enable-x264 --enable-xcb --with-x --enable-xvideo --enable-sdl --enable-avcodec --enable-avformat --enable-swscale --enable-mad --enable-a52 --enable-libmpeg2 --enable-dvdnav --enable-faad --enable-vorbis --enable-ogg --enable-theora --enable-mkv --enable-freetype --enable-fribidi --enable-speex --enable-flac --enable-live555 --enable-caca --enable-skins2 --enable-alsa --enable-ncurses --enable-debug --enable-lirc --enable-live555 --enable-shout --enable-taglib --enable-vcdx --enable-realrtsp --enable-svg --enable-dvdread --enable-dc1394 --enable-twolame --enable-dirac --enable-aa --enable-jack --enable-bluray --enable-opencv --enable-sftp --enable-pulse --enable-projectm --enable-vsxu --enable-atmo --enable-glspectrum '--with-extra-libs=/usr/local/lib' '--with-extra-includes=/usr/local/include' '--x-libraries=/usr/local/lib' '--x-includes=/usr/local/include' '--prefix=/usr/local' '--mandir=/usr/local/man' '--infodir=/usr/local/info/' EDIT: I am using the following version: VLC media player 2.2.0-git Weatherwax (revision 2.1.0-git-1168-g5804dd1) And the --plugin-path option is no longer supported.

    Read the article

  • copying folder and file permissions from one user to another after switching domains [closed]

    - by emptyspaces
    Please excuse the title, this was the best way I could think to describe this scenario without an entire paragraph. I am using C#. Currently I have a file server running windows server 2003 setup on a domain, we will call this oldDomain, and I have about 500 user accounts with various permissions on this server. Because of restrictions out of my control we are abandoning this domain and using another one that is more dominant within the organization, we will call this newDomain. All of the users that have accounts on oldDomain also have accounts on newDomain, but the usernames are completely different and there is no link between the two. What I am hoping to do is generate a list of all user accounts and this appropriate sid's from AD on the oldDomain, I already have this part done using dsquery and dsget. Then I will have someone go through and match all of the accounts from oldDomain to the correct username on newDomain. Ultimately leaving me with a list of sids from oldDomain and the appropriate username from newDomain. Now I am hoping to copy the file and folder permissions from the old user from oldDomain to the new user on newDomain once I join the server to newDomain. Can anyone tell me what the best way to copy permissions from the sid to the user on newDomain? There are a bunch of articles out there about copying permissions from user a to user b but I wanted to check and see what the recommended practice is here since there are a ton of directories.

    Read the article

  • Mod_rewrite is ignoring the extension of a file

    - by ngl5000
    This is my entire mod_rewrite condition: <IfModule mod_rewrite.c> <Directory /var/www/> Options FollowSymLinks -Multiviews AllowOverride None Order allow,deny allow from all RewriteEngine On # force www. (also does the IP thing) RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} !^mysite\.com [NC] RewriteRule ^(.*)$ http://mysite.com/$1 [R=301,L] RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.+)\.(\d+)\.(js|css|png|jpg|gif)$ $1.$3 [L] RewriteCond %{THE_REQUEST} /index\.(php|html) RewriteRule (.*)index\.(php|html)(.*)$ /$1$3 [r=301,L] RewriteCond %{REQUEST_URI} !^(/index\.php|/assets|/robots\.txt|/sitemap\.xml|/favicon\.ico) RewriteRule ^(.*)$ /index.php/$1 [L] # Block access to "hidden" directories or files whose names begin with a period. This # includes directories used by version control systems such as Subversion or Git. RewriteCond %{SCRIPT_FILENAME} -d [OR] RewriteCond %{SCRIPT_FILENAME} -f RewriteRule "(^|/)\." - [F] </Directory> </IfModule> It is suppose to allow only access to mysite.com(/index.php|/assets|/robots.txt|/sitemap.xml|/favicon.ico) The error was noticed with: mysite.com/sitemap vs mysite.com/sitemap.xml Both of these addresses are resolving to the xml file while the first url should be resolving to mysite.com/index.php/sitemap * For some reason mod_rewrite is completely ignoring the lack of an extension. It sounded like a Multiviews problem to me so I disabled Multiviews and it is still going on. ***And then a different rule will eventually take the index.php out, I am having another problem with an extra '/' being left behind when this happens. This httpd file is setting up for my codeigniter php framework

    Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >