Search Results

Search found 1567 results on 63 pages for 'b gen jack o neill'.

Page 3/63 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• Configure TV Capture card to not use external audio jack for TV audio output

  - by Adam D.

  I had this working with MythTV on Ubuntu 9.1. Then a power surge killed the motherboard. After replacing the motherboard, ram and cpu, the card does not produce any audio except through the output jack on the back of the card. I do not want to use a cable to go from the back of the card to the audio in on the built in sound card of the new mother board. FYI, the old motherboard did not have an on-board sound card. There was a separate audio card installed. There's some configuration that has to be done to have it work the same way again. I just have no idea where to start. This is regarding wintv hauppauge mythtv linux ubuntu 9.10 audio

  Read the article

• No Sound from headphone jack

  - by Tural Teyyuboglu

  I have DELL Inspiron N5110 laptop. Using windows 8. Recently I got an issue: The problem is, when I insert headphones and microphone into laptop, I get only microphone inserted notification. Laptop detects microphone But no headphones. In fact, It mutes sound from it's speakers. But no sound from headphones too: I tested headphones separately: they're working well. I also, reinstalled windows default sound drivers and IDT High Definition Audio drivers several times. No success! The final decision is: There is no sound from headphone jack in laptop. Any suggestions?

  Read the article

• Linux based audio prodcuction tutorials

  - by thelinuxer

  I have been searching for a while for Linux based audio production tutorials. All I can find is tool based tutorials. For example I found tutorials on how to use jack, ardour, lmms ..etc. What I need is tutorials that teaches professional audio production with opensource/free tools, like those already available for protools and likes. If any one can guide me to any videos/articles available it would be highly appreciated. Thanks.

  Read the article

• Ubuntu 12.04 - No sound - HELP!

  - by Bruno Tacca

  I'm panicking... my sound stopped working after I tried to set-up my notebook speakers, plus two headphone jacks... My idea was to multichannel the sound to 3 channels, built-in speakers, and sound-card 2 headphone jacks. After a couple efforts I did it with 2 channels, speakers and 1 headphone jack, but the other wasn't working. After more tries and tries, sound stop working. I just want my sound back... crying like a baby on the floor. And, if possible, but not necessary, a simple guide to active the 3 channels. xD I will post the diagnosis according to https://help.ubuntu.com/community/SoundTroubleshootingProcedure STEP 1 Did it, still no sound. STEP 2 Did it, still no sound. STEP 3 and #STEP 4 (I removed the log cause there is a limit of characters to be posted.) The log can be found here: https://answers.launchpad.net/ubuntu/+source/alsa-driver/+question/238653 STEP 5 Rebooted, still no sound. STEP 6 Did it. In the Output Devices tab, nothing is muted. I play a music with the Rhythmbox Music Player, I don't hear anything but in the pavucontrol I can see in the Built-in Audio Analog Stereo a sound bar shaking... but, no sound. STEP 7 In alsamixer, AlsaMixer v1.0.25 Card: HDA Intel PCH Chip: Creative CA0132 information View: F3:[Playback] F4: Capture F5: All Item: Headphone [dB gain: 25.00, 25.00] Then, I have 5 columns Headphone, Speaker, PCM, S/PDIF, S/PDIF Default PCM A little weird when I try to mute the Headphone and the Speaker, here what happens: Starting both unmutted, mutting headphone cause speaker being mutted automaticaly. Starting both unmutted, mutting speaker cause headphone being mutted automaticaly. Starting both mutted, possible to unmute both separately. STEP 8 I cannot hear sound on both (headphone and/or speaker). STEP 9 Dual boot... Restarted, windows was with sound at max volume. Restarted again, still no sound at ubuntu. I heard something when ubuntu started, a little noise, then silence again. The sound icon always start mutted, after unmutting, I have no sound. STEP 10 I dont have this command in my ubuntu. STEP 11 Tried at STEP 8, no sound. There are no problem with jumpers or hardware, cause I have sound working on windows. STEP 12 No way to open my alienware and loss the warranty x.X" STEP 13 I think it's loaded, judging my the logs STEP 14 Alienware M17xR4, the hardware is listed in the logs above, at STEP 4. There are two headphone hacks, one with just an headphone printed above, and the other with an headset (with mic) printed, there is a mic jack too, and a spdif (optical) too. STEP 15 I dont want to enable S/PDIF STEP 16 I never used the HDMI output, yet... Thanks in advance. I hope I listed all the information you need.

  Read the article

• Computer SOMETIMES recognizes when headphones are plugged in.

  - by rcrobot

  Whenever I plug my headphones into my computer's front headphone jack, I get a weird situation. Sometimes, the computer will recognize the headphones and work properly. But other times, the computer will play sound through both the headphones and my monitor's speaker. When this happens, the sound section of the system settings does not list the headphones. I can fix the issue temporarily by wiggling the headphone port, but if it gets wiggled the wrong way again, then the issue returns. My PC's case is a Rosewill Challenger. I have tried multiple headphones and the same issue is there. I suspect that this might be a hardware related issue, but if there is any way to fix it with software, that would be helpful. This is what it looks like when everything is working properly: This happens when I wiggle the headphone port. I can quickly switch between these two by doing so:

  Read the article

• GameKit and GKPeerPicker on 1st Gen iPhone and iPod Touch

  - by Reese McLean

  This is my current set up for my multiplayer game: A view that gives connection tips and warns the user that multiplayer will not work on the 1st Gen iPhone or ipod Touch. There is a "connect" button that pushes the game view and starts the GKPeerPicker. Unfortunately, I don't have a 1st Gen iPhone or iPod Touch to test what happens if they press the connect button. The view will be pushed, but I don't know what will happen when the PeerPicker tries to show. So the Question(s): Is there anyway to tell if the user will not be able to use GameKit so that I can disable the "connect" button? What will happen if they do press the connect button and GameKit is not available?

  Read the article

• deleted gen folder, eclipse isn't generating it now :(

  - by LuxuryMode

  I accidentally deleted my gen folder and now, predictably, my resources are all messed up. I just created a gen folder myself and tried to project clean - that didn't work. Tried right-clicking project and going to android tools fix project properties - didn't work. Tried unchecking build automatically...didn't work. cleaned, closed project, closed eclipse, restarted, etc, etc. Nothing is working and I keep seeing this error: gen already exists but is not a source folder. Convert to a source folder or rename it. EDIT - OK was able to generate R.java, but now I'm getting crazy stuff in the console: [2011-06-14 17:06:11 - fastapp] Conversion to Dalvik format failed with error 1 [2011-06-14 17:06:42 - fastapp] Dx trouble processing "java/awt/font/NumericShaper.class": Ill-advised or mistaken usage of a core class (java.* or javax.*) when not building a core library. This is often due to inadvertently including a core library file in your application's project, when using an IDE (such as Eclipse). If you are sure you're not intentionally defining a core class, then this is the most likely explanation of what's going on. However, you might actually be trying to define a class in a core namespace, the source of which you may have taken, for example, from a non-Android virtual machine project. This will most assuredly not work. At a minimum, it jeopardizes the compatibility of your app with future versions of the platform. It is also often of questionable legality. If you really intend to build a core library -- which is only appropriate as part of creating a full virtual machine distribution, as opposed to compiling an application -- then use the "--core-library" option to suppress this error message. If you go ahead and use "--core-library" but are in fact building an application, then be forewarned that your application will still fail to build or run, at some point. Please be prepared for angry customers who find, for example, that your application ceases to function once they upgrade their operating system. You will be to blame for this problem. If you are legitimately using some code that happens to be in a core package, then the easiest safe alternative you have is to repackage that code. That is, move the classes in question into your own package namespace. This means that they will never be in conflict with core system classes. JarJar is a tool that may help you in this endeavor. If you find that you cannot do this, then that is an indication that the path you are on will ultimately lead to pain, suffering, grief, and lamentation. [2011-06-14 17:06:42 - fastapp] Dx 1 error; aborting [2011-06-14 17:06:42 - fastapp] Conversion to Dalvik format failed with error 1 And eclipse can't resolve the import of my resources import com.me.fastapp.R;

  Read the article

• Gen folder disappearing in Eclipse Android project

  - by Adam Haile

  I'm just getting started developing for Android and I'm running into a weird problem. First off, I'm running Eclipse for Java devs v3.5.2 with the Android 2.1 SDK installed. Basically, whenever I do just about anything the "gen" (R.java, etc.) folder will just disappear from the project. I'm seen some people online say that it was still on the drive, just gone from the project listing in Eclipse, but in my case it is literally and completely gone. The only fix I've found is that if I refresh, then try to build, it gives an error and "gen" shows up in the project view (though it's not on the disk), then delete it from within the project, then Rebuild All and it will say that it cannot find it and is recreating it. Problem is, I have to do this every single time I want to build. There's got to be a fix for this.

  Read the article

• What other tape manufacturers can I use in IBM LTO Gen 3 SAS Tape Drives

  - by timgws

  I have recently just got my hands on an IBM 3580S3V. I was just wondering if there are any other brands that I can use in this IBM gear? LTO media are usually manufactured only by EMTEC, Imation, Fujifilm, Maxell, TDK and Sony (according to Wikipedia). I am trying to determine who OEM's the IBM tapes, or if possible, a list of media that IBM supports. So far in my Google studies, I have only been able to see IBM as the supported media manufacturer (seeing as they sell tapes, I assume they don't want anyone buying media from competitors!)

  Read the article

• iPod Nano 5th Gen and an old G4

  - by bobber205

  I want to buy my dad an iPod nano for christmas. All he has for a computer is an old G4 that is still running Mac OS X 10.3.x (10.3.9 probably) What iPod can I buy him and he still be able to use? The newest nano requires iTunes 9 which he cannot run. Thanks!

  Read the article

• iPod Nano 5th gen Album Artwork

  - by Wesley Caretto

  I am an album artwork fan. I just got all of these brand new alternate artwork covers for my albums and singles. Eventually, i got bored of them, and i wanted the original ones back. So i got on iTunes, and changed the original album covers to the primary covers. I synced my ipod, but it still showed the new covers on it, not the originals. I figured a temporary way to fix it, by deleting the new covers i got, making the originals the default. There has to be an easier way, though. p.s. this also works in vice-versa. I will add the new covers, but before i exit, i change the primary cover to the original. When i change it back to the new one, my iPod will still only show the original Thanks for helping!

  Read the article

• Debian sound on hdmi instead of jack

  - by Hans de Jong

  I installed debian (gnome) and i can't get my sound working. When i use inxi -A i get the following result: Audio: Card-1: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] driver: snd_hda_intel Card-2: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel Sound: Advanced Linux Sound Architecture ver: 1.0.24 My feeling tells me my sound output is on the HDMI instead of my jackplug on my motherboard. How can i change this to my motherboard sound output?

  Read the article

• How can seam-gen customized to support another database

  - by stacker

  I would like to create an application from a database schema using seam-gen, unfortunatly informix isn't supported out of the box. Where can I add another db?

  Read the article

• 12.04 Ubuntu studio PREEMPT_RT kernel options

  - by Nate Iverson

  My audio processing needs require a preempt_rt kernel. I roughly followed the guide: https://wiki.ubuntu.com/KernelTeam/GitKernelBuild with a little help from: https://rt.wiki.kernel.org/index.php/RT_PREEMPT_HOWTO Currently I am using the 3.4 branch (which is the most recent at the time of this post): http://www.kernel.org/pub/linux/kernel/projects/rt/ I think I have a reasonable kernel config ( for my machine at least ). Multiple trials confirm I need the option: CONFIG_PREEMPT_RT_FULL=y I have the following questions: Is anyone maintaining a recent CONFIG_PREEMPT_RT_FULL kernel in a ppa? Is there any interest in providing a CONFIG_PREEMPT_RT_FULL in the official ubuntu-studio distribution? Does anyone have recent config pointers for a CONFIG_PREEMPT_RT_FULL kernel?

  Read the article

• Forensic Analysis of the OOM-Killer

  - by Oddthinking

  Ubuntu's Out-Of-Memory Killer wreaked havoc on my server, quietly assassinating my applications, sendmail, apache and others. I've managed to learn what the OOM Killer is, and about its "badness" rules. While my machine is small, my applications are even smaller, and typically only half of my physical memory is in use, let alone swap-space, so I was surprised. I am trying to work out the culprit, but I don't know how to read the OOM-Killer logs. Can anyone please point me to a tutorial on how to read the data in the logs (what are ve, free and gen?), or help me parse these logs? Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 1, exc 2326 0 goal 2326 0... Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): task ebb0c6f0, thg d33a1b00, sig 1 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 1, exc 2326 0 red 61795 745 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 2, exc 122 0 goal 383 0... Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): task ebb0c6f0, thg d33a1b00, sig 1 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 2, exc 383 0 red 61795 745 Apr 20 20:03:27 EL135 kernel: kill_signal(13516.0): task ebb0c6f0, thg d33a1b00, sig 2 Apr 20 20:03:27 EL135 kernel: OOM killed process watchdog (pid=14490, ve=13516) exited, free=43104 gen=24501. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=4457, ve=13516) exited, free=43104 gen=24502. Apr 20 20:03:27 EL135 kernel: OOM killed process ntpd (pid=10816, ve=13516) exited, free=43104 gen=24503. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=27401, ve=13516) exited, free=43104 gen=24504. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=29009, ve=13516) exited, free=43104 gen=24505. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=10557, ve=13516) exited, free=49552 gen=24506. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=24983, ve=13516) exited, free=53117 gen=24507. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=29129, ve=13516) exited, free=68493 gen=24508. Apr 20 20:03:27 EL135 kernel: OOM killed process sendmail-mta (pid=941, ve=13516) exited, free=68803 gen=24509. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=12418, ve=13516) exited, free=69330 gen=24510. Apr 20 20:03:27 EL135 kernel: OOM killed process python (pid=22953, ve=13516) exited, free=72275 gen=24511. Apr 20 20:03:27 EL135 kernel: OOM killed process apache2 (pid=6624, ve=13516) exited, free=76398 gen=24512. Apr 20 20:03:27 EL135 kernel: OOM killed process python (pid=23317, ve=13516) exited, free=94285 gen=24513. Apr 20 20:03:27 EL135 kernel: OOM killed process tail (pid=29030, ve=13516) exited, free=95339 gen=24514. Apr 20 20:03:28 EL135 kernel: OOM killed process apache2 (pid=20583, ve=13516) exited, free=101663 gen=24515. Apr 20 20:03:28 EL135 kernel: OOM killed process logger (pid=12894, ve=13516) exited, free=101694 gen=24516. Apr 20 20:03:28 EL135 kernel: OOM killed process bash (pid=21119, ve=13516) exited, free=101849 gen=24517. Apr 20 20:03:28 EL135 kernel: OOM killed process atd (pid=991, ve=13516) exited, free=101880 gen=24518. Apr 20 20:03:28 EL135 kernel: OOM killed process apache2 (pid=14649, ve=13516) exited, free=102748 gen=24519. Apr 20 20:03:28 EL135 kernel: OOM killed process grep (pid=21375, ve=13516) exited, free=132167 gen=24520. Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 4, exc 4215 0 goal 4826 0... Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): task ede29370, thg df98b880, sig 1 Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 4, exc 4826 0 red 189481 331 Apr 20 20:03:57 EL135 kernel: kill_signal(13516.0): task ede29370, thg df98b880, sig 2 Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 5, exc 3564 0 goal 3564 0... Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): task c6c90110, thg cdb1a100, sig 1 Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 5, exc 3564 0 red 189481 331 Apr 20 20:04:53 EL135 kernel: kill_signal(13516.0): task c6c90110, thg cdb1a100, sig 2 Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): selecting to kill, queued 0, seq 6, exc 8071 0 goal 8071 0... Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): task d7294050, thg c03f42c0, sig 1 Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): selected 1, signalled 1, queued 1, seq 6, exc 8071 0 red 189481 331 Apr 20 20:07:14 EL135 kernel: kill_signal(13516.0): task d7294050, thg c03f42c0, sig 2 Watchdog is a watchdog task, that was idle; nothing in the logs to suggest it had done anything for days. Its job is to restart one of the applications if it dies, so a bit ironic that it is the first to get killed. Tail was monitoring a few logs files. Unlikely to be consuming memory madly. The apache web-server only serves pages to a little old lady who only uses it to get to church on Sundays a couple of developers who were in bed asleep, and hadn't visited a page on the site for a few weeks. The only traffic it might have had is from the port-scanners; all the content is password-protected and not linked from anywhere, so no spiders are interested. Python is running two separate custom applications. Nothing in the logs to suggest they weren't humming along as normal. One of them was a relatively recent implementation, which makes suspect #1. It doesn't have any data-structures of any significance, and normally uses only about 8% of the total physical RAW. It hasn't misbehaved since. The grep is suspect #2, and the one I want to be guilty, because it was a once-off command. The command (which piped the output of a grep -r to another grep) had been started at least 30 minutes earlier, and the fact it was still running is suspicious. However, I wouldn't have thought grep would ever use a significant amount of memory. It took a while for the OOM killer to get to it, which suggests it wasn't going mad, but the OOM killer stopped once it was killed, suggesting it may have been a memory-hog that finally satisfied the OOM killer's blood-lust.

  Read the article

• Load and Web Performance Testing using Visual Studio Ultimate 2010-Part 3

  - by Tarun Arora

  Welcome back once again, in Part 1 of Load and Web Performance Testing using Visual Studio 2010 I talked about why Performance Testing the application is important, the test tools available in Visual Studio Ultimate 2010 and various test rig topologies, in Part 2 of Load and Web Performance Testing using Visual Studio 2010 I discussed the details of web performance & load tests as well as why it’s important to follow a goal based pattern while performance testing your application. In part 3 I’ll be discussing Test Result Analysis, Test Result Drill through, Test Report Generation, Test Run Comparison, Asp.net Profiler and some closing thoughts. Test Results – I see some creepy worms! In Part 2 we put together a web performance test and a load test, lets run the test to see load test to see how the Web site responds to the load simulation. While the load test is running you will be able to see close to real time analysis in the Load Test Analyser window. You can use the Load Test Analyser to conduct load test analysis in three ways: Monitor a running load test - A condensed set of the performance counter data is maintained in memory. To prevent the results memory requirements from growing unbounded, up to 200 samples for each performance counter are maintained. This includes 100 evenly spaced samples that span the current elapsed time of the run and the most recent 100 samples.         After the load test run is completed - The test controller spools all collected performance counter data to a database while the test is running. Additional data, such as timing details and error details, is loaded into the database when the test completes. The performance data for a completed test is loaded from the database and analysed by the Load Test Analyser. Below you can see a screen shot of the summary view, this provides key results in a format that is compact and easy to read. You can also print the load test summary, this is generated after the test has completed or been stopped.         Analyse the load test results of a previously run load test – We’ll see this in the section where i discuss comparison between two test runs. The performance counters can be plotted on the graphs. You also have the option to highlight a selected part of the test and view details, drill down to the user activity chart where you can hover over to see more details of the test run.   Generate Report => Test Run Comparisons The level of reports you can generate using the Load Test Analyser is astonishing. You have the option to create excel reports and conduct side by side analysis of two test results or to track trend analysis. The tools also allows you to export the graph data either to MS Excel or to a CSV file. You can view the ASP.NET profiler report to conduct further analysis as well. View Data and Diagnostic Attachments opens the Choose Diagnostic Data Adapter Attachment dialog box to select an adapter to analyse the result type. For example, you can select an IntelliTrace adapter, click OK and open the IntelliTrace summary for the test agent that was used in the load test.   Compare results This creates a set of reports that compares the data from two load test results using tables and bar charts. I have taken these screen shots from the MSDN documentation, I would highly recommend exploring the wealth of knowledge available on MSDN. Leaving Thoughts While load testing the application with an excessive load for a longer duration of time, i managed to bring the IIS to its knees by piling up a huge queue of requests waiting to be processed. This clearly means that the IIS had run out of threads as all the threads were busy processing existing request, one easy way of fixing this is by increasing the default number of allocated threads, but this might escalate the problem. The better suggestion is to try and drill down to the actual root cause of the problem. When ever the garbage collection runs it stops processing any pages so all requests that come in during that period are queued up, but realistically the garbage collection completes in fraction of a a second. To understand this better lets look at the .net heap, it is divided into large heap and small heap, anything greater than 85kB in size will be allocated to the Large object heap, the Large object heap is non compacting and remember large objects are expensive to move around, so if you are allocating something in the large object heap, make sure that you really need it! The small object heap on the other hand is divided into generations, so all objects that are supposed to be short-lived are suppose to live in Gen-0 and the long living objects eventually move to Gen-2 as garbage collection goes through.  As you can see in the picture below all < 85 KB size objects are first assigned to Gen-0, when Gen-0 fills up and a new object comes in and finds Gen-0 full, the garbage collection process is started, the process checks for all the dead objects and assigns them as the valid candidate for deletion to free up memory and promotes all the remaining objects in Gen-0 to Gen-1. So in the future when ever you clean up Gen-1 you have to clean up Gen-0 as well. When you fill up Gen – 0 again, all of Gen – 1 dead objects are drenched and rest are moved to Gen-2 and Gen-0 objects are moved to Gen-1 to free up Gen-0, but by this time your Garbage collection process has started to take much more time than it usually takes. Now as I mentioned earlier when garbage collection is being run all page requests that come in during that period are queued up. Does this explain why possibly page requests are getting queued up, apart from this it could also be the case that you are waiting for a long running database process to complete.      Lets explore the heap a bit more… What is really a case of crisis is when the objects are living long enough to make it to Gen-2 and then dying, this is definitely a high cost operation. But sometimes you need objects in memory, for example when you cache data you hold on to the objects because you need to use them right across the user session, which is acceptable. But if you wanted to see what extreme caching can do to your server then write a simple application that chucks in a lot of data in cache, run a load test over it for about 10-15 minutes, forcing a lot of data in memory causing the heap to run out of memory. If you get to such a state where you start running out of memory the IIS as a mode of recovery restarts the worker process. It is great way to free up all your memory in the heap but this would clear the cache. The problem with this is if the customer had 10 items in their shopping basket and that data was stored in the application cache, the user basket will now be empty forcing them either to get frustrated and go to a competitor website or if the customer is really patient, give it another try! How can you address this, well two ways of addressing this; 1. Workaround – A x86 bit processor only allows a maximum of 4GB of RAM, this means the machine effectively has around 3.4 GB of RAM available, the OS needs about 1.5 GB of RAM to run efficiently, the IIS and .net framework also need their share of memory, leaving you a heap of around 800 MB to play with. Because Team builds by default build your application in ‘Compile as any mode’ it means the application is build such that it will run in x86 bit mode if run on a x86 bit processor and run in a x64 bit mode if run on a x64 but processor. The problem with this is not all applications are really x64 bit compatible specially if you are using com objects or external libraries. So, as a quick win if you compiled your application in x86 bit mode by changing the compile as any selection to compile as x86 in the team build, you will be able to run your application on a x64 bit machine in x86 bit mode (WOW – By running Windows on Windows) and what that means is, you could use 8GB+ worth of RAM, if you take away everything else your application will roughly get a heap size of at least 4 GB to play with, which is immense. If you need a heap size of more than 4 GB you have either build a software for NASA or there is something fundamentally wrong in your application. 2. Solution – Now that you have put a workaround in place the IIS will not restart the worker process that regularly, which means you can take a breather and start working to get to the root cause of this memory leak. But this begs a question “How do I Identify possible memory leaks in my application?” Well i won’t say that there is one single tool that can tell you where the memory leak is, but trust me, ‘Performance Profiling’ is a great start point, it definitely gets you started in the right direction, let’s have a look at how. Performance Wizard - Start the Performance Wizard and select Instrumentation, this lets you measure function call counts and timings. Before running the performance session right click the performance session settings and chose properties from the context menu to bring up the Performance session properties page and as shown in the screen shot below, check the check boxes in the group ‘.NET memory profiling collection’ namely ‘Collect .NET object allocation information’ and ‘Also collect the .NET Object lifetime information’.    Now if you fire off the profiling session on your pages you will notice that the results allows you to view ‘Object Lifetime’ which shows you the number of objects that made it to Gen-0, Gen-1, Gen-2, Large heap, etc. Another great feature about the profile is that if your application has > 5% cases where objects die right after making to the Gen-2 storage a threshold alert is generated to alert you. Since you have the option to also view the most expensive methods and by capturing the IntelliTrace data you can drill in to narrow down to the line of code that is the root cause of the problem. Well now that we have seen how crucial memory management is and how easy Visual Studio Ultimate 2010 makes it for us to identify and reproduce the problem with the best of breed tools in the product. Caching One of the main ways to improve performance is Caching. Which basically means you tell the web server that instead of going to the database for each request you keep the data in the webserver and when the user asks for it you serve it from the webserver itself. BUT that can have consequences! Let’s look at some code, trust me caching code is not very intuitive, I define a cache key for almost all searches made through the common search page and cache the results. The approach works fine, first time i get the data from the database and second time data is served from the cache, significant performance improvement, EXCEPT when two users try to do the same operation and run into each other. But it is easy to handle this by adding the lock as you can see in the snippet below. So, as long as a user comes in and finds that the cache is empty, the user locks and starts to get the cache no more concurrency issues. But lets say you are processing 10 requests per second, by the time i have locked the operation to get the results from the database, 9 other users came in and found that the cache key is null so after i have come out and populated the cache they will still go in to get the results again. The application will still be faster because the next set of 10 users and so on would continue to get data from the cache. BUT if we added another null check after locking to build the cache and before actual call to the db then the 9 users who follow me would not make the extra trip to the database at all and that would really increase the performance, but didn’t i say that the code won’t be very intuitive, may be you should leave a comment you don’t want another developer to come in and think what a fresher why is he checking for the cache key null twice !!! The downside of caching is, you are storing the data outside of the database and the data could be wrong because the updates applied to the database would make the data cached at the web server out of sync. So, how do you invalidate the cache? Well if you only had one way of updating the data lets say only one entry point to the data update you can write some logic to say that every time new data is entered set the cache object to null. But this approach will not work as soon as you have several ways of feeding data to the system or your system is scaled out across a farm of web servers. The perfect solution to this is Micro Caching which means you cache the query for a set time duration and invalidate the cache after that set duration. The advantage is every time the user queries for that data with in the time span for which you have cached the results there are no calls made to the database and the data is served right from the server which makes the response immensely quick. Now figuring out the appropriate time span for which you micro cache the query results really depends on the application. Lets say your website gets 10 requests per second, if you retain the cache results for even 1 minute you will have immense performance gains. You would reduce 90% hits to the database for searching. Ever wondered why when you go to e-bookers.com or xpedia.com or yatra.com to book a flight and you click on the book button because the fare seems too exciting and you get an error message telling you that the fare is not valid any more. Yes, exactly => That is a cache failure! These travel sites or price compare engines are not going to hit the database every time you hit the compare button instead the results will be served from the cache, because the query results are micro cached, its a perfect trade-off, by micro caching the results the site gains 100% performance benefits but every once in a while annoys a customer because the fare has expired. But the trade off works in the favour of these sites as they are still able to process up to 30+ page requests per second which means cater to the site traffic by may be losing 1 customer every once in a while to a competitor who is also using a similar caching technique what are the odds that the user will not come back to their site sooner or later? Recap   Resources Below are some Key resource you might like to review. I would highly recommend the documentation, walkthroughs and videos available on MSDN. You can always make use of Fiddler to debug Web Performance Tests. Some community test extensions and plug ins available on Codeplex might also be of interest to you. The Road Ahead Thank you for taking the time out and reading this blog post, you may also want to read Part I and Part II if you haven’t so far. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Questions/Feedback/Suggestions, etc please leave a comment. Next ‘Load Testing in the cloud’, I’ll be working on exploring the possibilities of running Test controller/Agents in the Cloud. See you on the other side! Thank You!   Share this post : CodeProject

  Read the article

• Scheme homework Black jack help....

  - by octavio

  So I need to do a game of blackjack simulator, butt can't seem to figure out whats wrong with the shuffle it's suppose to take a card randomly from the pack the put it on top of the pack. The delete it from the rest. so : (ace)(2)(3)(4)(5)...(k) if random card is let say 5 (5)(ace)(2)(3)(4)(5)...(k) then it deletes the 2nd 5 (5)(ace)(2)(3)(4)(6)...(k) here is the code: (define deck '((A . C) (2 . C) (3 . C) (4 . C) (5 . C) (6 . C) (7 . C) (8 . C) (9 . C) (10 . C) (V . C) (Q . C) (K . C))) ;auxilliary function for shuffle let you randomly select a card. (define shuffAux (lambda (t) (define cardR (lambda (t) (list-ref t (random 13)))) (cardR t))) ;auxilliary function used to remove the card after the car to prevent you from removing the randomly selected from the car(begining of the deck). (define (removeDupC card deck) (delete card (cdr deck)) ) (define shuffle2ndtry (lambda (deck seed) (define do-shuffle (lambda (deck seed) (if (> seed 0)( (cons (shuffAux deck) deck) (removeDupC (car deck) deck) (- 1 seed)) (write deck) ) ) ) (do-shuffle deck seed))) (define (shuffle deck seed) (define cards (cons (shuffAux deck) deck)) (write cards) (case (> seed 0) [(#t) (removeDupC (car cards) (cdr cards)) (shuffle cards (- seed 1))] [(#f) (write cards)])) (define random (let ((seed 0) (a 3141592653) (c 2718281829) (m (expt 2 35))) (lambda (limit) (cond ((and (integer? limit)) (set! seed (modulo (+ (* seed a) c) m)) (quotient (* seed limit) m)) (else (/ (* limit (random 34359738368)) 34359738368)))))) ;function in which you can delete an element from the list. (define delete (lambda (item list) (cond ((equal? item (car list)) (cdr list)) (else (cons (car list) (delete item (cdr list))))))) (

  Read the article

• XSL Info - Can't find jack about it

  - by coffeeaddict

  I looked up XSL and can't figure out what exactly it's talking about. I see what it stands for. Is XSL even used anymore?

  Read the article

• LLBL Gen Predicate Filter

  - by Neil

  I am new to LLBLGen Pro and am checking for duplicate, I have the following SQL: SQL: select a.TopicId,atc.TopicCategoryId,a.Headline from article a inner join ArticleTopicCategory atc on atc.ArticleId = a.Id where a.TopicId = 'C0064FAE-093B-466E-8745-230534867D2F' and a.Headline = 'Test' and atc.TopicCategoryId in ('004D64F7-474C-48F9-9887-17B1E7532A84') Whenever I step though my function, it always returns 0: LLBLGen Code: public bool CheckDuplicateArticle(Guid topicId, List<Guid> categories, string headline) { ArticleCollection articles = new ArticleCollection(); PredicateExpression filter = new PredicateExpression(); RelationCollection relation = new RelationCollection(); relation.Add(ArticleEntity.Relations.ArticleTopicCategoryEntityUsingArticleId); filter.AddWithAnd(ArticleFields.TopicId == topicId); filter.AddWithAnd(ArticleTopicCategoryFields.Id == categories); filter.AddWithAnd(ArticleFields.Headline == headline); articles.GetMulti(filter, 0, null, relation); return articles.Count > 0; } Any help would be appreciated!

  Read the article

• uiSlider thumb graphic 'flashes' when dragging uiScrollview on 1st gen 3.1.3

  - by Mark Tompson

  I have added my own thumb to a uiSlider and added a 1px x 1px transparent .png to the tracks (I don't want to see the tracks) (I have also tried setting tracks to nil). My uiSlider is also rotated to vertical. The uiSlider sits over a uiScrollView but is not 'attached' to that view. There are numerous uiLabels 'attached' to this uiScrollView, so they all slide about 'beneath' the uiSlider. It all works fine on 3g and iphone 4, but on my 1g itouch (3.1.3) I get a strange flash from the thumb graphic sometimes when scrolling the uiScrollview!? It does seem to happen when the edge of a uiLabel (on the uiScrollView) passes 'under' the thumb graphic? I have tried everything I can think of...

  Read the article

• The Next-gen Databases

  - by Randin

  I'm learning traditional Relational Databases (with PostgreSQL) and doing some research I've come across some new types of databases. CouchDB, Drizzle, and Scalaris to name a few, what is going to be the next database technologies to deal with?

  Read the article

• Relative probabilities using random number gen

  - by CyberShot

  If I have relative probabilities of events A, B, C occurring. i.e P(A) = 0.45, P(B) = 0.35, P(C) = 0.20, How do I do represent this using a random number generator between 0 and 1? i.e. R = rand(0,1) if (R < 0.45) event A else if(R < 0.35) event B else if(R < 0.20) event C The above works for two events A,B but I think the above is wrong for three or more since there is overlapping. This is obviously a very simple question and the answer should be immediately evident, but I'm just too stupid to see it.

  Read the article

• VMWare Headphone Issue

  - by Ash_Geek_Pickney

  I am running VMWare Workstation Version 7 on a Windows 7 partition on a Macbook Pro. I have built a virtual XP machine within vmware to run some old music programs. The sound from my virtual machines comes out of my macbook speakers but the volume is not controllable using my macbook volume controls, only by using the volume control on the XP machine. My problem is that i need to use headphones, and when i plug a headphone jack into my macbook, the sound from my vmware virtual machines still comes out of the macbook speakers. I am baffled. Please help. Thanks in advance...

  Read the article

• Where can I find free or buy "next-gen" 3D Assets?

  - by Valmond

  Usually I buy 3D Assets from sites like turbosquid.com or similar. My problem is that I have lately implemented glow, normal maps, specular (and specular power) maps and reflection maps and I can't find any models that use those techniques. So where can I find / buy "next gen" assets (at least models/items with a normal map)? I have checked for similar posts but those I found are about either free only or 2D or 'ordinary' 3D so I hope this is not a duplicate.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >