Search Results

Search found 29560 results on 1183 pages for 'colin fine'.

Page 3/1183 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • IPv6 working fine, IPv4 throws OpenSSL error

    - by jippie
    I am building a webserver ( http://blog.linformatronics.nl/ ), which functions just fine on both IPv4 and IPv6 and when using a non-SSL connection. However when I connect to it through https, IPv6 works as expected, but an IPv4 connection throws a client side error. Server side logs are empty for the IPv4/https connection. Summarized in a table: | http | https -----+-------+------------------------------------------------------- IPv4 | works | OpenSSL error, failed. No server side logging. -----+-------+------------------------------------------------------- IPv6 | works | self signed certificate warning, but works as expected Apparently the SSL tunnel isn't even set up, which accounts for the Apache logs being empty. But why does it work fine for IPv6 and fail for IPv4? My question is why is this OpenSSL error being thrown and how can I solve it? Below is some extra information about the setup. IPv6 https Command used to reproduce IPv6/https behaviour: $ wget --no-check-certificate -O /dev/null -6 https://blog.linformatronics.nl --2012-11-03 15:46:48-- https://blog.linformatronics.nl/ Resolving blog.linformatronics.nl (blog.linformatronics.nl)... 2001:980:1b7f:1:a00:27ff:fea6:a2e7 Connecting to blog.linformatronics.nl (blog.linformatronics.nl)|2001:980:1b7f:1:a00:27ff:fea6:a2e7|:443... connected. WARNING: cannot verify blog.linformatronics.nl's certificate, issued by `/CN=localhost': Self-signed certificate encountered. WARNING: certificate common name `localhost' doesn't match requested host name `blog.linformatronics.nl'. HTTP request sent, awaiting response... 200 OK Length: 4556 (4.4K) [text/html] Saving to: `/dev/null' 100%[=======================================================================>] 4,556 --.-K/s in 0s 2012-11-03 15:46:49 (62.5 MB/s) - `/dev/null' saved [4556/4556] IPv4 https Command used to reproduce IPv6/https behaviour: $ wget --no-check-certificate -O /dev/null -4 https://blog.linformatronics.nl --2012-11-03 15:47:28-- https://blog.linformatronics.nl/ Resolving blog.linformatronics.nl (blog.linformatronics.nl)... 82.95.251.247 Connecting to blog.linformatronics.nl (blog.linformatronics.nl)|82.95.251.247|:443... connected. OpenSSL: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol Unable to establish SSL connection. Notes I am on Ubuntu Server 12.04.1 LTS

    Read the article

  • Some Emails incoming to Outlook 2007 are blank, same emails work fine on webmail, iphone, etc

    - by Funran
    This is a pretty easy problem to describe. Basically users who have just been upgraded to Outlook 2007 (yeah I know 2010 is out), are not receiving SOME emails (from outside our domain, ie hotmail, yahoo). Receiving is not the correct word, these emails come in, along with their attachments, subjects, to/from line, etc. But the body is blank. If the same user goes into their webmail, iphone, blackberry instead, they can read the message fine. It's clear to me that something in Outlook 2007 is not generating the body correctly, so it just strips it. I just don't know WHY. Our mail server was recently upgraded to Exchange 2010, users on 2010 running outlook 2003 are working fine, it's just the random emails for users using 2007. I hope I made that clear enough, thank you for any future help guys. EDIT: I don't see rft, but i swear I've seen it before. Here is the view source on a recent email. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><html><head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> <meta name="GENERATOR" content="MSHTML 8.00.6001.19120"> <DEFANGED_style_0 <="" style=""> </head> <body bgcolor="#ffffff"> <p><DEFANGED_DIV><font color="#0000ff" size="2" face="Calibri">MS,</font></p><DEFANGED_DIV> <p><DEFANGED_DIV><font color="#0000ff" size="2" face="Calibri">Could you tell me please what the legal descrip &amp; Topo Quad name is for this Monroe P.ID Site?</font></p><DEFANGED_DIV> <p><DEFANGED_DIV><em><font color="#0000ff" size="2" face="Calibri">Thanks, Henry Roye</font></em></p><DEFANGED_DIV></body></html>

    Read the article

  • brctl Not working fine with bridging eth0 and at0

    - by Passi0n
    I made an access point with airbase-ng and its at0 I tried to bridge my eth0 and at0 by brctl addbr demo brctl addif demo eth0 brctl addif demo at0 brctl demo up dhclient3 demo & already removed eth0 ip so when i use ping 192.168.1.1 -I eth0 theres no reply but if i use ping 192.168.1.1 -I demo it works!!! In browser internet works fine so when i connect my android with at0 (access point) it should same work. but its now working at all :(

    Read the article

  • USB Flash not recognised by Windows and BIOS, but works fine in Linux

    - by bbalegere
    I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

    Read the article

  • Server unable to communicate OUT, fine serving traffic

    - by jonoabroad
    We have several servers that are randomly loses the ability to communicate out to other nodes on the local network and internet. However websites are being served fine and we still have ssh access. A reboot seems to fix the problem for a few days. The servers are running 10.5.X and are fully up to date with software updates. Does anyone have any opinions, we think it is probably an ISP router, but we are guessing. Cheers Jono

    Read the article

  • APC File Cache not working but user cache is fine

    - by danishgoel
    I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

    Read the article

  • Pasting images into gmail from clipboard, shows fine when sent, but arrives as text

    - by John Robertson
    I have had consistent problems with pasting images into Gmail. I use Firefox (just in case that is relevant, but I wouldn't expect so). The image displays fine as I write it. But when it arrives at my family members Gmail account, it is being displayed in some base64 encoded form as many pages of text with a beginning like: img src="data:image/png;base64,iVBORw0KGgoAAA..... On the receiving end I cannot get the images to display properly.

    Read the article

  • http port 80 slow, while other ports are fine

    - by lydonchandra
    I am using ADSL2+, and the sustained connection can go up to 1.3MB/s, but recently the HTTP connection has been quite slow ( other port i.e. ftp, torrent, etc are fine). I am using Netgear modem/router for my ADSL connection, and am using Netgear switches for my LAN (connected to the modem). What can go wrong and how can I investigate?

    Read the article

  • URL not responding on OS X, fine on other machine

    - by Rory Fitzpatrick
    For some reason I can't access anything on python.org. nslookup resolves the IP address, but no browser or curl command will fetch anything. It works fine on a VMWare Ubuntu virtual machine and on a Windows machine on the same network. I've checked there's nothing funny in /etc/hosts I don't know where else to go looking for issues, can anyone suggest anything? Running OS X 10.5 Leopard

    Read the article

  • Site down, SSH and FTP work fine

    - by Euskadi
    I cannot access my site through my web browser, using either the domain name or IP address (which also pings fine). My site was working last night when I went to bed, so I can't think what might have done it. I have tried restarting apache to no avail. update: I've noticed that http://[IP Address]/phpymyadmin works but [domain name]/phpmyadmin does not, and the same happens for webmin (https://[IP]:1000). Could this be a problem with BIND?

    Read the article

  • Sudo yum seems to fail on CentOS, but works fine after sudo -i

    - by Aron Rotteveel
    I am currently having some trouble with yum through sudo. For some reason, it does not seem to work: aron@graviton [/var/log]# sudo yum clean all There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/python2.4/lib-dynload/datetime.so: failed to map segment from shared object: Cannot allocate memory Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq The strange thing, however, is that it works fine when I gain root privileges through sudo -i first. Any ideas what might be causing this problem?

    Read the article

  • Can't access Linux machine from the network, network from the machine is fine

    - by Matt
    I'm having issues with a machine that stopped replicating with mysql. It's managed by a guy on another continent but recently I've had to get involved. The server is running Ubuntu server 9.10 I can't log in with SSH, there is no response. On the server itself I can ssh to localhost fine. I thought maybe it's the firewall rules. I'm no expert on IP Tables, but I believe that's not the issue as I removed all the rules. But it still won't let me in. Any ideas? it's acting from other machines as though the service isn't listening, but I know that it is. It's like this for all services.

    Read the article

  • Fine control over zoom and aspect ratio in VLC player

    - by ashh
    In VLC Player (v1.01), how do I zoom video and control aspect ratio with fine control, as is possible with Media Player Classic Home Cinema (MPCHC)? The standard zoom appears to only support double, normal, quarter size etc, not useful to me at all. An example: I play an older music video file that is in 4:3 aspect ratio. In MPCHC I can use the number pad to zoom in small increments until I have removed the left and right letterbox bars and the video fills the whole screen. I can also stretch and move the video in small increments until I am happy with the aspect ratio and position. I could continue using MPCHC, but I have two displays and really like VLC feature enabling full-screen video on the main screen and the VLC interface (menus etc) on the second. I have not found a way to do this on MPCHC, if anyone knows I'd also be interested to hear.

    Read the article

  • need for tcp fine-tuning on heavily used proxy server

    - by Vijay Gharge
    Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

    Read the article

  • Sudo yum seems to fail on CentOS, but works fine after sudo -i

    - by Aron Rotteveel
    I am currently having some trouble with yum through sudo. For some reason, it does not seem to work: aron@graviton [/var/log]# sudo yum clean all There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/python2.4/lib-dynload/datetime.so: failed to map segment from shared object: Cannot allocate memory Please install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is: 2.4.3 (#1, Sep 3 2009, 15:37:37) [GCC 4.1.2 20080704 (Red Hat 4.1.2-46)] If you cannot solve this problem yourself, please go to the yum faq at: http://wiki.linux.duke.edu/YumFaq The strange thing, however, is that it works fine when I gain root privileges through sudo -i first. Any ideas what might be causing this problem?

    Read the article

  • Mercurial says hgrc is untrusted in Emacs, but works fine from the command line

    - by Ken
    I've got some Mercurial checkouts in a directory that was mounted by root. Mercurial is usually suspicious of files that aren't mine, but I'm the only user here, so I put: [trusted] users = root groups = root in my ~/.hgrc, and now I can use hg from the command line with no warnings or errors about anything being untrusted. So far, great. But when I try to run, say, vc-annotate in Emacs, I get an Annotate buffer that says: abort: unknown revision 'Not trusting file /home/me/.../working-copy/.hg/hgrc from untrusted user root, group root Not trusting file /home/me/.../working-copy/.hg/hgrc from untrusted user root, group root 7648'! The message area says: Running hg annotate -d -n --follow -r... my-file.c...FAILED (status 255) I don't have anything in my .emacs related to vc or hg. Other commands, like vc-diff, work fine. What am I missing here?

    Read the article

  • Laptop loses signal from WiFi router, but mobile phone holds it fine

    - by Anton
    I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

    Read the article

  • Mouse works fine but keyboard (not wireless) not responding to anything

    - by Christine Boeke
    I read previous questions like mine and looked to see if keys were depressed and checked to make sure the mouse key was off in the system preferences. The mouse works just fine but the keyboard seems to be dead. I plugged in another keyboard and it responded identically. Is it something in the Desktop itself? Could I need a technician? I have searched for answers on line and had no success. Thanks!

    Read the article

  • Laptop loses signal from WiFi router, but mobile phone holds it fine

    - by Anton
    Hi, I have an extremely weird issue with my WiFi router. Both Ubuntu & Windows 7 can connect to it fine, but after 5-10 minutes browser (any one) stops opening pages and tells me it cannot resolve host address. But, at the same time, tools like Skype or BitTorrent work without any issues. I can also browse Internet on my mobile phone connected to the very same router. If I reset router it helps, but after 5-10 minutes I see just the same problem... Ubuntu tells me that WiFi signal is lost (mobile sees it), Windows 7 just won't let me browse anywhere. Can anyone give me a suggestion on this, please? Thanks

    Read the article

  • need for tcp fine-tuning on heavily used proxy server

    - by Vijay Gharge
    Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

    Read the article

  • Internet really slow or stops working on my computer but fine on my laptop and ipad

    - by Fr0zen1
    I know you are going to say that this has been answered already, but it hasnt. None of those solutions worked for me. So this is the problem, and it only occurs on my computer, my laptop,ipad and iphone are just fine. When I`m browsing the net, it laods webpages slow(my speed is 30mb down and 3mb up) and when I start downloading with a another application(steam, utorrent), my browser completely stops working, but the application thats downloading(steam, utorrent) continues to download with a fast spead(2-3mb/s) and I do not know why. I have this issue on all browsers. I have tried chrome, internet explorer and firefox. I have restored my windows but still the same issue and I also have kubuntu installed and it also has the same issue. I do not know why. Any help? Thank you

    Read the article

  • Memory works fine separately, but not together

    - by patersonjs
    I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >