Search Results

Search found 111 results on 5 pages for 'g5'.

Page 3/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• Ubuntu Suspend won't wake by mouse

  - by corsen

  I just installed Ubuntu 11.04 and realized that suspend would not wake by either keyboard or mouse. After following instructions from here: http://ubuntuforums.org/showthread.php?t=1642817 The system will now wake by keyboard. I have a USB mouse it is a logitech G5. Even if I enable all of the USB devices listed in /proc/acpi/wakeup, my computer will still not wake up via mouse. I'd really prefer to wake by mouse instead of keyboard due to cats. Does anyone know why my mouse won't wake the machine even after enabling all USB devices listed? Thanks, Bryan

  Read the article

• kernel panic - not syncing vfs unable to mount root fs on unknown-block(1,0) on live cd

  - by sobox studio

  I'm trying to install ubunutu 12.04 on my 2005 PowerMac G5. I've burnt ubuntu-12.04-desktop-powerpc.iso. I try to boot from the live cd. I hit 'enter' to load the live environment. The kernel seems to be fine but then I get this: kernel panic - not syncing vfs unable to mount root fs on unknown-block(1,0) Then it says rebooting in 180........ and hangs. I can't do anything. Any help would be appreciated. Thank you.

  Read the article

• Mac HDD Is Encrypted

  - by user206844

  I have the hard drive from a PowerMac G5, which was my old computer before it died and I upgraded to Ubuntu Studio. The hard drive its self still works well, but on Ubuntu I can't access most of the files. I plugged it into my MacBook Air and changed some of the perms on some of the folders as a test. This worked for a few, but for others, I was getting the same message Cannot access folder. Access denied. I would like to use this as an external HDD (I have a case and everything), but it's kind of pointless if I can't access the folders that I want. After looking around for a couple of hours, I couldn't find anything that actually gave me an answer. I would like to know if: Anybody else has come upon this problem, If so, have you found a solution? and, What is it?

  Read the article

• EADDRNOTAVAIL when binding 127.0.0.1 on localhost?

  - by Jonas Byström

  I'm getting errno==49 (EADDRNOTAVAIL) when trying to UDP-bind() to 127.0.0.1:47346 running Mac OS X on a G5 (big endian PowerPC). Is there something preventing me from doing so? I've tried other addresses and ports (192.168.1.2 and port 47346) but with no success. Here's a gdb printout of my sockaddr_in: $1 = { sin_len = 0 '\0', sin_family = 2 '\002', sin_port = 47346, sin_addr = { s_addr = 3232235778 }, sin_zero = "???\000\000??" }

  Read the article

• NIC Bonding/balance-rr with Dell PowerConnect 5324

  - by Branden Martin

  I'm trying to get NIC bonding to work with balance-rr so that three NIC ports are combined, so that instead of getting 1 Gbps we get 3 Gbps. We are doing this on two servers connected to the same switch. However, we're only getting the speed of one physical link. We are using 1 Dell PowerConnect 5324, SW version 2.0.1.3, Boot version 1.0.2.02, HW version 00.00.02. Both servers are CentOS 5.9 (Final) running OnApp Hypervisor (CloudBoot) Server 1 is using ports g5-g7 in port-channel 1. Server 2 is using ports g9-g11 in port-channel 2. Switch show interface status Port Type Duplex Speed Neg ctrl State Pressure Mode -------- ------------ ------ ----- -------- ---- ----------- -------- ------- g1 1G-Copper -- -- -- -- Down -- -- g2 1G-Copper Full 1000 Enabled Off Up Disabled Off g3 1G-Copper -- -- -- -- Down -- -- g4 1G-Copper -- -- -- -- Down -- -- g5 1G-Copper Full 1000 Enabled Off Up Disabled Off g6 1G-Copper Full 1000 Enabled Off Up Disabled Off g7 1G-Copper Full 1000 Enabled Off Up Disabled On g8 1G-Copper Full 1000 Enabled Off Up Disabled Off g9 1G-Copper Full 1000 Enabled Off Up Disabled On g10 1G-Copper Full 1000 Enabled Off Up Disabled On g11 1G-Copper Full 1000 Enabled Off Up Disabled Off g12 1G-Copper Full 1000 Enabled Off Up Disabled On g13 1G-Copper -- -- -- -- Down -- -- g14 1G-Copper -- -- -- -- Down -- -- g15 1G-Copper -- -- -- -- Down -- -- g16 1G-Copper -- -- -- -- Down -- -- g17 1G-Copper -- -- -- -- Down -- -- g18 1G-Copper -- -- -- -- Down -- -- g19 1G-Copper -- -- -- -- Down -- -- g20 1G-Copper -- -- -- -- Down -- -- g21 1G-Combo-C -- -- -- -- Down -- -- g22 1G-Combo-C -- -- -- -- Down -- -- g23 1G-Combo-C -- -- -- -- Down -- -- g24 1G-Combo-C Full 100 Enabled Off Up Disabled On Flow Link Ch Type Duplex Speed Neg control State -------- ------- ------ ----- -------- ------- ----------- ch1 1G Full 1000 Enabled Off Up ch2 1G Full 1000 Enabled Off Up ch3 -- -- -- -- -- Not Present ch4 -- -- -- -- -- Not Present ch5 -- -- -- -- -- Not Present ch6 -- -- -- -- -- Not Present ch7 -- -- -- -- -- Not Present ch8 -- -- -- -- -- Not Present Server 1: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:55 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:28:ae USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:28:af USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.52.1 NETMASK=255.255.0.0 GATEWAY=10.200.2.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:55 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:ae Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:af Server 2: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:a7 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:30:30 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:30:31 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.53.1 NETMASK=255.255.0.0 GATEWAY=10.200.3.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:a7 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:30 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:31 Here are the results of iperf. ------------------------------------------------------------ Client connecting to 10.200.52.1, TCP port 5001 TCP window size: 27.7 KByte (default) ------------------------------------------------------------ [ 3] local 10.200.3.254 port 53766 connected with 10.200.52.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 950 MBytes 794 Mbits/sec

  Read the article

• bash: per-command history. How does it work?

  - by romainl

  OK. I have an old G5 running Leopard and a Dell running Ubuntu 10.04 at home and a MacPro also running Leopard at work. I use Terminal.app/bash a lot. On my home G5 it exhibits a nice feature: using ? to navigate history I get the last command starting with the few letters that I've typed. This is what I mean (| represents the caret): $ ssh user@server $ vim /some/file/just/to/populate/history $ ss| So, I've typed the two first letters of "ssh", hitting ? results in this: $ ssh user@server instead of this, which is the behaviour I get everywhere else : $ vim /some/file/just/to/populate/history If I keep on hitting ? or ?, I can navigate through the history of ssh like this: $ ssh otheruser@otherserver $ ssh user@server $ ssh yetanotheruser@yetanotherserver It works the same for any command like cat, vim or whatever. That's really cool. Except that I have no idea how to mimic this behaviour on my other machines. Here is my .profile: export PATH=/Developer/SDKs/flex_sdk_3.4/bin:/opt/local/bin:/opt/local/sbin:/usr/local/bin:/sw/bin:/sw/sbin:/bin:/sbin:/bin:/sbin:/usr/bin:/usr/sbin:$HOME/Applications/bin:/usr/X11R6/bin export MANPATH=/usr/local/share/man:/usr/local/man:opt/local/man:sw/share/man export INFO=/usr/local/share/info export PERL5LIB=/opt/local/lib/perl5 export PYTHONPATH=/opt/local/bin/python2.7 export EDITOR=/opt/local/bin/vim export VISUAL=/opt/local/bin/vim export JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home export TERM=xterm-color export GREP_OPTIONS='--color=auto' GREP_COLOR='1;32' export CLICOLOR=1 export LS_COLORS='no=00:fi=00:di=01;34:ln=target:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.deb=00;31:*.rpm=00;31:*.TAR=00;31:*.TGZ=00;31:*.ARJ=00;31:*.TAZ=00;31:*.LZH=00;31:*.ZIP=00;31:*.Z=00;31:*.Z=00;31:*.GZ=00;31:*.BZ2=00;31:*.DEB=00;31:*.RPM=00;31:*.jpg=00;35:*.png=00;35:*.gif=00;35:*.bmp=00;35:*.ppm=00;35:*.tga=00;35:*.xbm=00;35:*.xpm=00;35:*.tif=00;35:*.png=00;35:*.fli=00;35:*.gl=00;35:*.dl=00;35:*.psd=00;35:*.JPG=00;35:*.PNG=00;35:*.GIF=00;35:*.BMP=00;35:*.PPM=00;35:*.TGA=00;35:*.XBM=00;35:*.XPM=00;35:*.TIF=00;35:*.PNG=00;35:*.FLI=00;35:*.GL=00;35:*.DL=00;35:*.PSD=00;35:*.mpg=00;36:*.avi=00;36:*.mov=00;36:*.flv=00;36:*.divx=00;36:*.qt=00;36:*.mp4=00;36:*.m4v=00;36:*.MPG=00;36:*.AVI=00;36:*.MOV=00;36:*.FLV=00;36:*.DIVX=00;36:*.QT=00;36:*.MP4=00;36:*.M4V=00;36:*.txt=00;32:*.rtf=00;32:*.doc=00;32:*.odf=00;32:*.rtfd=00;32:*.html=00;32:*.css=00;32:*.js=00;32:*.php=00;32:*.xhtml=00;32:*.TXT=00;32:*.RTF=00;32:*.DOC=00;32:*.ODF=00;32:*.RTFD=00;32:*.HTML=00;32:*.CSS=00;32:*.JS=00;32:*.PHP=00;32:*.XHTML=00;32:' export LC_ALL=C export LANG=C stty cs8 -istrip -parenb bind 'set convert-meta off' bind 'set meta-flag on' bind 'set output-meta on' alias ip='curl http://www.whatismyip.org | pbcopy' alias ls='ls -FhLlGp' alias la='ls -AFhLlGp' alias couleurs='$HOME/Applications/bin/colors2.sh' alias td='$HOME/Applications/bin/todo.sh' alias scale='$HOME/Applications/bin/scale.sh' alias stree='$HOME/Applications/bin/tree' alias envoi='$HOME/Applications/bin/envoi.sh' alias unfoo='$HOME/Applications/bin/unfoo' alias up='cd ..' alias size='du -sh' alias lsvn='svn list -vR' alias jsc='/System/Library/Frameworks/JavaScriptCore.framework/Versions/A/Resources/jsc' alias asl='sudo rm -f /private/var/log/asl/*.asl' alias trace='tail -f $HOME/Library/Preferences/Macromedia/Flash\ Player/Logs/flashlog.txt' alias redis='redis-server /opt/local/etc/redis.conf' source /Users/johncoltrane/Applications/bin/git-completion.sh export GIT_PS1_SHOWUNTRACKEDFILES=1 export GIT_PS1_SHOWUPSTREAM="verbose git" export GIT_PS1_SHOWDIRTYSTATE=1 export PS1='\n\[\033[32m\]\w\[\033[0m\] $(__git_ps1 "[%s]")\n\[\033[1;31m\]\[\033[31m\]\u\[\033[0m\] $ \[\033[0m\]' mkcd () { mkdir -p "$*" cd "$*" } function cdl { cd $1 la } n() { $EDITOR ~/Dropbox/nv/"$*".txt } nls () { ls -c ~/Dropbox/nv/ | grep "$*" } copy(){ curl -s -F 'sprunge=<-' http://sprunge.us | pbcopy } if [ -f /opt/local/etc/profile.d/cdargs-bash.sh ]; then source /opt/local/etc/profile.d/cdargs-bash.sh fi if [ -f /opt/local/etc/bash_completion ]; then . /opt/local/etc/bash_completion fi Any idea?

  Read the article

• CentOS 5.5 APIC issue on ESX 4.1 & ML115

  - by Adnan

  Hi, I've just installed vSphere 4.1 on an HP ProLiant ML115 G5 Quad-core and am trying to install CentOS 5.5 as a guest system. However, when the guest boots up I get a calibrate_APIC_clock warning and a kernel panic message. I've come across this knowledge base article on the vmware website which suggests moving the guest onto another Intel based host (!). Funnily enough I don't have a collection of spare host servers sitting around, so can anyone suggest another solution? Alternatively, would installing an earlier version of CentOS get around this issue, or would a yum update put me back to square one? How about BIOS settings, could anything be tweaked there? Thanks.

  Read the article

• How to remove raid 5 array of 5 SAS and use only use one SAS at a time without writing any thing to disc for recovery

  - by murtaza hamid

  I have HP server ML370 g5 with 8 SAS, c drive 1 72 gb raid 0, d drive 2 72 gb raid 0, f drive 5 146 gb raid 5. 2 of 5 sas drive has got bad sectors and raid 5 is showing status failed. now i want to remove all this 5 SAS and put 1 by 1 in any of the bay to make its image for data recovery purpose without writing anything to the drive. how should i proceed. i also want to keep drive c and d intact. also is it possible if i put all this 5 drives in the bay with the same sequense will it recognise the raid 5 array ( i read some where its smart controller..just curious) many thanks in advance.

  Read the article

• Slow NFS transfer performance of small files

  - by Arie K

  I'm using Openfiler 2.3 on an HP ML370 G5, Smart Array P400, SAS disks combined using RAID 1+0. I set up an NFS share from ext3 partition using Openfiler's web based configuration, and I succeeded to mount the share from another host. Both host are connected using dedicated gigabit link. Simple benchmark using dd: $ dd if=/dev/zero of=outfile bs=1000 count=2000000 2000000+0 records in 2000000+0 records out 2000000000 bytes (2.0 GB) copied, 34.4737 s, 58.0 MB/s I see it can achieve moderate transfer speed (58.0 MB/s). But if I copy a directory containing many small files (.php and .jpg, around 1-4 kB per file) of total size ~300 MB, the cp process ends in about 10 minutes. Is NFS not suitable for small file transfer like above case? Or is there some parameters that must be adjusted?

  Read the article

• Disabling RAID feature on HP Smart Array P400

  - by Arie K

  I'm planning to use ZFS on my system (HP ML370 G5, Smart Array P400, 8 SAS disk). I want ZFS to manage all disks individually, so it can utilize better scheduling (i.e. I want to use software RAID feature in ZFS). The problem is, I can't find a way to disable RAID feature on the RAID controller. Right now, the controller aggregates all of the disks into one big RAID-5 volume. So ZFS can't see individual disk. Is there any way to acomplish this setup?

  Read the article

• Shrink Partition on Production Server

  - by Campo

  SO our production server was only setup with one large partition. I have setup a standby server and properly partitioned it. Now the boss wants the production environment's partition shrunk. It is an HP DL380 G5 We have 4 hot swap drives in a raid 5. How best should I go about doing this. Seems like a bad idea to me. Should I use windows or HP to do the partitioning? What should I be aware of in a production environment? The idea is to put the site (Inetpub) on a separate partition instead of the C: drive. How much downtime should I expect? Is this a terrible idea? Anything else I have missed?

  Read the article

• RAID across SAS controller ports

  - by BlueGene

  Hi, I'm managing a HP DL360 G5 machine. It has a SAS controller with two ports. Port 1 is attached to 4 drive bays and Port 2 has 2 bays. The machine currently has 3 drives connected to Port 1 with RAID 5 configuration. I'm trying to max out the bays by adding 1 disk in port 1 and 2 in port 2. Can I group those three disks(1 disk-port, 2 disks-port 2) in a RAID 5 configuration?

  Read the article

• Clonezilla is not able to clone a RAID 1 disk

  - by Adrian

  I have a HP Server DL320 G5. There are two SATA hard disks configured as RAID 1 through HP embedded RAID controller. Server OS is running GNU/Linux (Fedora) Server booted up with clonezilla live CD. The image will be stored on a NAS connected through NFS. Clonezilla could mount the NFS share and could see the two hard disks /dev/sda and /dev/sdb. I selected /dev/sda for disk cloning. However I could not see the cloning progress and got straight into a prompt for reboot, poweroff, command line I tried to select /dev/sdb but the same issue.

  Read the article

• iMac invalid memory access and then crash?

  - by Sam McAfee

  My iMac G5 from a few years ago (the square white one) dies now, with a message about an invalid memory access. It goes straight to an Open Firmware prompt and doesn't even load the Mac OS at all. Am I correct in guessing that the memory is probably the issue, and that if I replace it, we may be able to boot again as normal? That's my gut feeling anyway, so I ordered some more memory and plan to swap it today. Any thoughts? Ideas?

  Read the article

• Issues with non-HP harddisk in HP ML 350 server?

  - by Torben Warberg Rohde

  I'm looking to buy some extra disk space for a HP ML 350 G5 server. It is for simple file-serving - not OS/system stuff. HP harddisks are insanely expensive, so I'm tempted to buy some other brand instead. I have heard that they sometime use special firmware on their disks, but I suspect that might just be HP spreading rumors to sell disks. Does anyone have experience using non-HP disks? Any features not working, or not being able to build the RAID at all? I'm looking at 2.5" SAS Seagate drives - Constellation 500 GB (7.2k) or Savvio 600 GB (10k).

  Read the article

• Windows Server 2003 not automatically assigning drive letter to external drives

  - by Chris

  My newly rebuilt Windows Server 2003 doesn't automatically assign drive letters to external usb devices. I have to manually open the Disk Management Console and assign it a drive letter every time. It does this with two different drives in all USB ports. I have been doing some reading and I don't have any network drives, I have also already tried USBDLM and it doesn't seem to have made any difference. Specs: ProLiant ML150 G5 with Windows 2003 Enterprise and all updates installed. Any ideas on what I can try to resolve this problem would be greatly appreciated. Chris

  Read the article

• Mac OS x 10.4 Tiger Will Not Boot

  - by keithbrown38

  My G5 Tower all of a sudden is ONLY booting to the Registration page, the where after you installed the software you are suppose to Register. I cant get it to boot in safe mode, so I am using my usb 2.0 SATA cable to connect my drive to a my macbook pro and I am using (CCC) Disc to Disc Clone and it is copying to my external WD passport drive and that makes a startup disc along with all my info from my drive. My question is was there anything easier and less time consuming than that? Does anyone know why this would happen all of a sudden? Thank You All in Advance for your help and support! Keith B

  Read the article

• How to setup an iTunes library to use between two Macs?

  - by stead1984

  As you can tell this is no where near work related. I have an iMac G5 where my itunes is currently hosted, I have also just got a new MacBook Pro. What I want to be able to do is sync my itunes library from my iMac to my MacBook Pro, that way it can be accessible away from my home network, then if I make any changes to the itunes library (like change a track name) it will sync these changes back once I connect back to the home network. My current itunes contains music, videos, podcasts, playlists and iPhone apps, I would also like iTunes to track play counts collectively between the iMac and the MacBook Pro.

  Read the article

• Network backup for Macs and PCs - formatting question

  - by neilfein

  I'm trying to use a LaCie 2TB drive as an AirPort drive, for backup on a home network. We have one mac and two PC laptops. My plan is to create a Mac partition and a Windows partition. However, Disk Utility won't let me set the windows partition to Windows format; there's no option in the menu for it in the partition tab. Am I doing something wrong? Alternatively, is there a way to partition the drive with one partition that all three machines can see? We have a Mac G5 with 10.4 and two laptops with Windows 7. Thanks!

  Read the article

• Apple Airport Extreme Wireless Card M8881 Connectivity Issue

  - by Carlosfocker

  I bought a Apple Airport Extreme Wireless Card M8881 with the antenna for my old Power Mac G5 1.6 Ghz. The computer is running OS X 10.4. The card works and I can connect to my dlink 802.11g wireless router using WPA2/AES encryption. The problem is that the connection has intermittent connectivity issues. When the issue occurs the signal bars for the connection drop to one or two bars and the performance of the connection suffers greatly. The computer isn't far from the wireless router. I have a laptop at the desk where the mac is and it does not have any issues. I'm not sure what it might be? Updated drivers? Firmware? Let me know if I forgot any important information.

  Read the article

• Difficulty racking HP ProLiant Gen8 servers

  - by Systemspoet

  We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

  Read the article

• Difficulty racking Proliant G8's

  - by Systemspoet

  We're an all Proliant shop with around 50 servers, mostly DL360s and DL380, from G5's through G7's. We just got our first two G8's in and went to rack them. We were stunned to find out that the new cable management arms protrude almost 1 inch deeper into the rack then previous iterations of the Proliant line. Unfortunately that causes them to occupy the same space as the PDU's in our APC racks. In a non-densely populated section of rack that's no biggie, but in a densely populated section it's impossible to get the cable arm into place without dislodging another machine's power. Has anyone else run into this? Obviously racking machines without cable management arms is not an option. I supposed we could reconfigure our racks but that's a nightmare.

  Read the article

• VMware ESX 3.5 Host Health shown as unknown

  - by dunxd

  I have an ESX 3.5 update 5 cluster of five host servers, all fully patched as of this Friday. Today I noticed that one of the servers has the Hardware Health status as unknown in Virtual Center Infrastructure Client. When I look at the Health Status view under configuration for that host, all the items are status Unknown. The server is exactly the same configuration as the others - same model (HP DL360 G5), memory, NICs etc. I have tried restarting the management service with service mgmt-vmware restart but this has not resolved the issue. Asides from this, I am not seeing any issues with the cluster - however, I hate having a blind spot like this. Any ideas?

  Read the article

• Creating ip alias on bonded interface ie. bond0:1

  - by bobothechimp

  System: HP Proliant DL360 G5 running CentOS 5.4 Bonded interface is working fine for a long time. I just went to add an alias the way I always have on a regular interface, and on first check it works (pinging on the local box) but it is not accessable from outside (iptables is turned off). In addition with this setup the normal network response started to decline, hanging for around a minute before I could get a prompt on login. Here are my config files: [root network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-bond0 DEVICE=bond0 BONDING_OPTS="mode=1 miimon=100" BOOTPROTO=none ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.11 USERCTL=no [root network-scripts]# cat ifcfg-bond0:1 DEVICE=bond0:1 BOOTPROTO=static ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.12 USERCTL=no any thoughts?

  Read the article

• Oracle Linux Delivers Top CPU Benchmark Results on Sun Blades

  - by sergio.leunissen

  From the Performance and Best Practices blog: Fresh SPEC CPU2006 results for Sun Blade X6275 M2 Server Modules running Oracle Linux 5.5. The highlights: The dual-node Sun Blade X6275 M2 server module, equipped with two Intel Xeon X5670 2.93 GHz processors per node and running the Oracle Enterprise Linux 5.5 operating system delivered the best SPECint_rate2006 and SPECfp_rate2006 benchmark results for all systems with Intel Xeon processor 5000 sequence. With a SPECint_rate2006 benchmark result of 679, the Sun Blade X6275 M2 server module, with two compute nodes per blade, delivers maximum performance for space constrained environments. Comparing Oracle's dual-node blade to HP's dual-node blade server, based on their single node performance, the Sun Blade X6275 M2 server module SPECfp_rate2006 score of 241 outperforms the best published HP ProLiant BL2X220c G5 server score by 3.2x. A single node of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 37% improvement in SPECint_rate2006 benchmark results and 22% improvement in SPECfp_rate2006 benchmark results compared to the previous generation Sun Blade X6275 server module. Both nodes of a Sun Blade X6275 M2 server module using 2.93 GHz Intel Xeon X5670 processors delivered 59% improvement on the SPECint_rate2006 benchmark and 40% improvement on the SPECfp_rate2006 benchmark compared to the previous generation Sun Blade X6275 server module.

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >