Search Results

Search found 2481 results on 100 pages for 'hp photosmart'.

Page 3/100 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Ubuntu slow on HP 2000 notebook with Apu e1-1200

  - by user169861

  I am using HP 2000 notebook which initially came with Windows 7 64bit. It has 4gb ram, AMD APU E1-1200 (1.4ghz) with Radeon 7310. With Windows it worked ok, so I decided to switch to Ubuntu. I installed 13.04 64bit at first, but responsiveness wasn't that good (opening windows, menus, Firefox, dash search) even if it was way better during the testing from live USB. I tried different kind of drivers for graphic card, 13.6beta, 13.4, fgrlx proprietary, upgraded kernel but the situation was the same. Then I tried installing 32bit version but the results were identical. After that I tried LTS version 12.04 and Xubuntu 13.04.. Responsiveness wasn't that different at all. Not sure what to do, and I wouldn't want to go back to Windows. This machine is not a beast, but it should be enough to deal with Unity or Xfce without troubles. Oh yes, I have insydeH20 BIOS with not so many options at my disposal. Thanks and best regards,

  Read the article

• HP Envy Beats Edition can play CDs, but not DVDs

  - by Grayson

  After a fresh install, and various other tests (troubleshooting), I have concluded that my laptop (an HP Envy 14 - Beats Edtion) will not play DVDs, however it will play CDs. When I first got the laptop, up until recently it played DVDs perfectly, I doubt there is a hardware issue sees as it loads the DVDs and can view the files in them, but not play them, as well as read and work with CDs perfectly. Was there an update or something of the like that may have caused this? If so, is there a fix? I typically use this laptop 's HDMI out with my TV as a DVD player... so it would be very beneficial if there was a solution to this problem. There was a similar issue with the touchpad that there was a fix for... so I'm hoping that this is something similar

  Read the article

• Configure audio on HP ENVY 4 ultrabook

  - by phodu_insaan

  I want to configure audio for ubuntu 12.04 on my laptop. Currently the audio just does not play. If i try and plug in headphones then somewhere midway to being fully plugged in the audio plays on the headphones, I plug in further and the sound disappears. How do I get this to work? lspci | grep audio Audio device: Intel Corporation Panther Point High Definition Audio Controller My laptop is one the beats edition HP laptops, and the driver for win7 was an IDT HD audio driver. --EDIT-- The output for cat /proc/asound/card0/codec* | grep Codec is Codec: IDT 92HD91BXX Codec: Intel PantherPoint HDMI I need to get both the IDT card to work and the HDMI card to work with my TV. --EDIT-- --EDIT 2-- I have added blacklist snd-usb-audio to the end of the file /etc/modprobe.d/alsa-base.conf Now the sound plays from my laptop speakers only when I plug in a headphones/external speaker. Otherwise no sound. :( Please help getting everything working as it should. --EDIT 2-- Thanks

  Read the article

• Laptop in-built Web Cam stopped working HP Probook

  - by Dave A

  My laptop (HP Probook) webcam has always worked. When I upgraded to 13.10 it stopped working. No solution found then so gave up. Recently upgraded to 14.04 still not working so thought I would ask anyone again if a solution had been found. lsusb Bus 001 Device 004: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera dmesg | grep uvcvideo` [ 765.466575] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 765.467305] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 765.467954] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 765.467960] uvcvideo: Failed to initialize the device (-5). [ 765.468022] usbcore: registered new interface driver uvcvideo Tried searching everywhere but there does not appear to be any clear solution to the driver issue - very weird as my camera is listed as supported by uvcvideo and it has always worked.

  Read the article

• Brightness control not working on HP Pavilion dm3t (Intel GMA 4500MHD)

  - by James

  Hey all, I picked up an hp dm3t laptop with intel HD graphics and installed ubuntu 10.10 64 bit on it. It works great -- the only problem is that the brightness controls on the keyboard don't work. The brightness is always at full. When I try to adjust it down, the indicator graphic indicates that it's going down but the actual brightness doesn't change. Is there anything that I can try to make this work? I'd really appreciate any help. I asked this on superuser.com and someone commented that I should play around with the intel hd drivers. I'm a total noob -- how do I do that? What else can I try? I really don't want to go back to windows.

  Read the article

• Can't install Ubuntu in a HP DV6 Laptop

  - by EApubs

  I just bought an HP DV6 6011tx (link) Laptop... I formated the disk through Windows and prepared for installing Ubuntu... When I insert the live CD, it shows the ubuntu start screen and then everything goes black (no cursor... Just like the screen is switched off (but the system is working)) When i try to install from the USB, it says Live media is not found! Some times it also give a black screen like the CD... Have any idea how to fix this? Thanks

  Read the article

• HP Pavillion laptop screen problems

  - by Liealais Vards Nekas

  Approximately after 4 days when I installed my Ubuntu 10.10 an interesting problem with my laptop screen starts. I had similar problem what you can see in this video - http://www.youtube.com/watch?v=jCYVfGVGWyY&feature=related - but it doesn't happen all the time. The most interesting thing is that, than I had that problem only when I turn my laptop screen in different angle. And this "bad" angle changes by the time, so after about 15 minutes after booting computer I can turn laptop screen in normal position. This is software or hardware problem? I'm using HP Pavillion dv9000.

  Read the article

• Right click doesn't work on HP mini 210 touchpad

  - by user4041

  Need help in getting the right mouse click to work on a HP mini 210-1015TU when using the touchpad. If I plug in a USB mouse, both left click and right click function as normal. Using the touchpad however I can only get the left click to work. Attempting to right click gives the result expected from a left click. As per some comments on a forum I added a file 11-touchpad.conf to /usr/share/X11/xorg.conf.d. I can provide further details if required. This made touchpad operation noticeably smoother but the problem with the right mouse click remains. Not a hardware problem as right clicked worked with 10.04 and still works with Windows 7 starter. 10.10 installed using wubi.

  Read the article

• Setting up Beats audio on HP Pavilion m6

  - by Joel Auterson

  I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

  Read the article

• Suspend/resume issue hp envy m6

  - by aikeru

  :) I just installed Ubuntu 13.10 on my HP envy m6. When I press the "power" button and select to suspend, it looks like it goes to sleep (power light flashing, as expected). When I press the power button to wake it (or anything else), it stops flashing and goes solid (as it should) but the screen is black. I tried CTRL+ALT+F1 but nothing seems to happen. Is there something I can do to get Ubuntu to resume from suspend? EDIT: I tried getting any updates for Ubuntu as well as updating my BIOS. Neither seems to have any effect. EDIT: Tried the 2nd script from Ubuntu 12.04 LTS suspend fix and it seemed to have no effect. Tried the 1st script and now I can't seem to suspend at all - Ubuntu seems to try to suspend and then immediately goes to the password prompt. With some combination of things I seem to be able to get a new crash, though, involving wpa_supplicant. I allowed it to submit feedback. My WiFi seems to be working fine (I assume this is what WPA is). EDIT: I know this is 'askubuntu', but I did try latest Linux Mint / Cinnamon. Results were exactly the same (black screen, power light solid after waking up - just as before, I can make it reboot by mashing CTRL+ALT+DEL but CTRL+ALT+F1/etc. doesn't work). Trying Ubuntu 12.04 next. EDIT: Ubuntu 12.04 WORKS! At least it seems to with a quick test. Came right back up after suspend. If I don't have any other problems and no answers are suggested, I'll make my own answer and accept it. Maybe someone can use this information to help troubleshoot the real issue. Would be nice to be on the latest version... but suspend would've been a deal-breaker for me. Hope this info helps someone.

  Read the article

• Touchpad right click doesn't work on HP Envy 14 beats

  - by jdrageme01

  I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

  Read the article

• HP Pavilion 15 with AMD dual graphics - Ubuntu live environment not starting

  - by creepus

  I've had this laptop for about a day now and have decided to try Ubuntu on it and determine if I want to install it. I created a USB, it booted (Secure Boot was on, I tried with Secure Boot off to no effect), and then the problem occurred. The screen turned off for a second, turned back on to a black screen, shut off again and turned back on with a dialogue box telling me that the system had to use low-graphics mode. I clicked OK, selected low-graphics mode from the menu and clicked OK. The screen switched to the boot messages and did not go any further than this. Ctrl+Alt+DEL started rebooting the laptop though. I tried booting again, but this time I edited the boot options in GRUB to add nomodeset. This time, the laptop only booted to a black screen. Ctrl+Alt+F2 took me to a prompt, I tried startx from there, but X didn't start, complaining that it wanted kernel mode setting back. I can not seem to find any option to disable one graphics chip or the other in the UEFI setup menus. Laptop : HP Pavilion 15-E004AU. The CPU : AMD A6-4400M APU with Radeon(tm) HD Graphics The graphics chip : AMD Radeon HD 7520G + 8670M Dual Graphics. The Ubuntu version : 13.10, 64 bit. Thanks. EDIT: I tried 12.04.3 LTS, it managed to bring the desktop up. There are severe graphics glitches after about two minutes though.

  Read the article

• Dual boot on Hp Envy Ultrabook

  - by phodu_insaan

  I just bought a HP Envy ultrabook 1002TX. It comes with a Win7 Home basic and a 32GB SSD + 500GB HDD. I started to install ubuntu and in doing so went and deleted all the partitions on my HDD and recreated them the way I wanted. Then when I tried to install ubuntu it didn't recognize my HDD. To solve this i typed dmraid -E -r /dev/sdX where the 'X' was my SSD drive. After this ubuntu can install but windows for some reason does not install. Also the Intel Caching feature is lost and SSD is just sitting and doing nothing. I want to know how to solve this problem. Ideeally I would like to use the SSD for caching, either in windows or ubuntu. How do I get the SSD back to working as an Intel rapid cache? How do I get windows to install properly? It tell me that windows is unable to configure itself to my hardware, and my PC came with windows pre-installed so this is not possible. Sorry for the long question and thanks for your answers! PS: At one time when I booted I pressed Ctrl+i and went to the intel rapid cache menu. I think i screwed up something in here, because only after this the rapid cache stopped working, and each time I booted the PC thought the BIOS was my primary disk.

  Read the article

• Can't install the wireless driver in HP Pavilion dv2419us

  - by maqtanim

  I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

  Read the article

• Touchpad not working on HP

  - by Grayson

  Everything worked fine in Ubuntu 10.04, flawless in fact, I admired the way the Operating System had handled such a unique touchpad so well. I have an HP Pavilion dv6. The touchpad and left, middle, and right click buttons are all on the trackpad, and it the bottom end depresses to click accordingly for each kind of click. In 10.04, everything worked fine, upon upgrading to Ubuntu 10.10 things became... odd. The scroll on the side would work, as would the left click. The right click wouldn't work however, but if you would lightly tap the exact right corner of the touchpad, the right click menu would come up, though it was inconsistent and difficult to make it do so. I have applied a fix I found on the older Ubuntu Forums for a similar issue, and it restored the normal left and right click, but it isn't as fluid, and there isn't the vertical scroll feature, which I do rather like to have... I would just like things to be as it was, if this is possible, please, please tell me how to do so. Thank you.

  Read the article

• HP dv7 Beats Audio Subwoofer on while headphones plugged in

  - by msilis

  I have looked for answers to this but have not found anything. People have similar problems but mostly with getting the subwoofer to work at all. I got the subwoofer to work by editing the /etc/modprobe.d/alsa-base.conf file and adding options snd-hda-intel model=ref. When I plug in my headphones, the main speakers turn off but the subwoofer still has sound coming through it. The output is selected automatically in sound preferences and is set to headphones when they are plugged in. I also have tried muting the main speakers, which in turn mutes the subwoofer, before plugging in the headphones as they seem to have two different volume controls, but as soon as the headphones are plugged in, the subwoofer has sound coming out of it. I am running Ubuntu 11.10 64 bit on HP dv7- 4285dx. I am able to just not have the subwoofer on but since I have gotten it to work I would like to keep it around and not have to change a config file every time I want to plug in my headphones. Any ideas or suggestions would be greatly appreciated. Thanks

  Read the article

• Touchpad issues on HP Pavilion dm4 (can't right click)

  - by Habstinat

  Can anyone help me with my touchpad issues? I have a HP Pavilion dm4 and it has two areas on the bottom of the touchpad to designate right and left clicks. This mostly doesn't work on Ubuntu in the fact that it recognizes any taps on either tap zone as a left click. Instead, I have it set so if I tap anywhere on the pad it makes a left click. There should be, and there are, many ways in the mouse configuration window to simulate a right click using only a touchpad. None of these work. Changing mouse orientation doesn't do anything, "dwell click" also does nothing, and, the oddest part of this problem, whenever I try to turn "Simulated Secondary Click" off (it doesn't work anyways, but just to try to toggle it), the entire theme of my desktop changes to a gray Windows '95ey look. The only way to get rid of this is to close and reopen the mouse preferences window. My computer is fairly new and the Ubuntu installation is less than a day old. I didn't do anything that I think could cause this. The problem is that I can't right click. Help, please?s that I can't right click. Help, please? Afterword: I installed two scripts from http://sansmicrosoft.blogspot.com/2010/10/pavilion-dm4-1160-erratic-touchpad.html . They didn't do anything I couldn't already do, and they did not make it possible for me to right click. :(

  Read the article

• Touchpad issues on HP Pavilion dm4 (can't right click)

  - by Habstinat

  Can anyone help me with my touchpad issues? I have a HP Pavilion dm4 and it has two areas on the bottom of the touchpad to designate right and left clicks. This mostly doesn't work on Ubuntu in the fact that it recognizes any taps on either tap zone as a left click. Instead, I have it set so if I tap anywhere on the pad it makes a left click. There should be, and there are, many ways in the mouse configuration window to simulate a right click using only a touchpad. None of these work. Changing mouse orientation doesn't do anything, "dwell click" also does nothing, and, the oddest part of this problem, whenever I try to turn "Simulated Secondary Click" off (it doesn't work anyways, but just to try to toggle it), the entire theme of my desktop changes to a gray Windows '95ey look. The only way to get rid of this is to close and reopen the mouse preferences window. My computer is fairly new and the Ubuntu installation is less than a day old. I didn't do anything that I think could cause this. The problem is that I can't right click. Help, please?s that I can't right click. Help, please? Afterword: I installed two scripts from http://sansmicrosoft.blogspot.com/2010/10/pavilion-dm4-1160-erratic-touchpad.html . They didn't do anything I couldn't already do, and they did not make it possible for me to right click. :(

  Read the article

• Can't Remove Logical Drive/Array from HP P400

  - by Myles

  This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

  Read the article

• Configuring VLAN's on two HP procurve switches

  - by pan

  Trying to route a new ISP (Microwave link) from one of my out buildings to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network, I plan on using a new vlan called "airspeed" only for this ISP traffic. Up until now I've just been using the Default_vlan on both HP switches (4108 + 2524). So far I've been unable to ping from my laptop to the ISP modem both of which are on the new vlan 2 ("Airspeed"). No traffic needs to cross from vlan 2 to vlan 1 so I've left the ports as untagged. I've used the subnet provide from my ISP as the new vlan 2 subnet. Can anybody see what I'm doing wrong here? I've added the configuration of both switch below. Rough diagram: Microwave modem (Gateway IP 77.75.00.49) | HP 2524 switch (port 24) | HP 2524 switch fibre link | HP 4108GL switch fibre link | HP 4108GL switch (port D1) | Laptop configured with IP 77.75.00.50 (for testing but will be connected to firewall) And my 4108GL config: ; J4865A Configuration Editor; Created on release #G.07.21 hostname "HP ProCurve Switch 4108GL" cdp run module 1 type J4864A module 2 type J4862B module 3 type J4862B module 4 type J4862B ip default-gateway 128.1.146.50 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged A1-A3,B1-B24,C1-C24,D2-D24 ip address 128.1.146.203 255.255.0.0 no untagged D1 exit vlan 2 name "Airspeed" untagged D1 ip address 77.75.00.51 255.255.255.248 exit Finally my 2524 config: ; J4813A Configuration Editor; Created on release #F.04.08 hostname "HP ProCurve Switch 2524" cdp run ip default-gateway 0.0.0.0 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.51 "public" snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged 1-23,25-26 no untagged 24 ip address 128.1.146.204 255.255.0.0 exit vlan 2 name "Airspeed" untagged 24 ip address 77.75.00.51 255.255.255.248 exit no aaa port-access authenticator active

  Read the article

• HP-UX -> Linux incremental remote backup

  - by stack_zen

  Hi. I've the need to setup a differential backup process from a range of remote HP-UXes to a central RHEL5 server. I'd happily go with rsync, problem is, stock HP-UX 11.11 has no built-in rsync and I don't have permissions to install any software on the remote stock HP-UXes. How should I approach this? HP-UX provides: fbackup (HP-UX exclusive) cpio (available in RHEL5, allows backing up only the files which changed, but always grabs the totality of the file) ssh remote_user@remote_host 'find /u01/engine/logs/ -type f -name "*.log" | cpio -o | gzip -' | cpio gunzip - | -idmv Those solutions don't really answer my incremental (bandwidth efficiency) problem do they?

  Read the article

• HP F2180 driver installation fails on 64-bit Windows 7

  - by Noam Gal

  Hello; I am trying to install the HP Deskjet AIO (non-network) driver on my machine, which is running the 64-bit version of Windows 7. Before installing it, Windows detected my printer just fine... But I wanted to use the HP scanning application, because tt allows me to scan several photos at once. I ran the DJ_AIO_NonNetwork_ENU_NB file I got from their site, and the installation went almost without a problem... However, at the part where it should have detected the printer, it didn't, so I skipped it - telling the installer I'll connect the printer later. After it was finished I was able to use it regularly, and also scan using the wanted HP application. However, the installer kept popping at random intervals, and giving me an error message. Yesterday I tried removing all the installed HP Applications, and installing from scratch. Running the same installer setup, it now insists that it does not support my operating system, and that 64-bit Vista is the highest it can go... I just don't understand why this is occuring all of the sudden. Has anybody here successfully installed the AIO driver on the 64-bit version of Windows 7? UPDATE: Been chatting with HP chat support over the weekend. Managed to really mess up my windows. At first, they told me to uninstall using an "unintall_l3" batch file inside their installer package, and then reinstall. Didn't work. Also the "l4" batch didn't make any difference. Afterwards I was told to install "Windows install clean up" and remove many hp entries (most of which were not listed on my computer), and I also removed many other hp entries I bumped upon. Then my office 2k7 started failing. I searched around the web, and ran Security Restore, so now my office works, but my windows explorer is all buggy - can't seem to open windows explorer - it hangs while trying to load my hard drives, or completely ignores them and just shows my libraries. Anyone here has any idea how I can restore my win7 to normal, with or without the annoying scanner? UPDATE 2: Ok - explorer back to normal. I guess I just had to wait until it finishes searching while opening the windows explorer for the first time after the Security Restore. Scanner still not working though.

  Read the article

• Configure spanning tree from HP to Cisco hardware

  - by Tim Brigham

  I have three switches I'd like to configure in a loop - a Cisco stack (3750s) and two HP 2900 series. Each is connected to the next with a 10 gig backplane of one form or another. How do I configure the spanning tree on these systems to make this function correctly? From the documents I've looked at it looks like I need to set both sets of hardware to use MST mode but I'm not sure past that point. The trunking, etc is all set up as needed. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. HP Switch 1 show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 1-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 352,485 Time Since Last Change : 2 secs CST Root MAC Address : 0018ba-c74268 CST Root Priority : 1 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- ... A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | 2000 128 Forwarding | 0021f7-126580 2 Yes No HP Switch 2 show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 1-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 19,623 Time Since Last Change : 32 secs CST Root MAC Address : 0018ba-c74268 CST Root Priority : 1 CST Root Path Cost : 202000 CST Root Port : A1 IST Regional Root MAC Address : 0024a8-cd6000 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- ... A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Blocking | a44c11-a67c80 2 Yes No B2 | Auto 128 Disabled | Cisco Stack 1 show spanning-tree ... (additional VLANs) VLAN0100 Spanning tree enabled protocol ieee Root ID Priority 1 Address 0018.bac7.426e Cost 2 Port 107 (TenGigabitEthernet2/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32868 (priority 32768 sys-id-ext 100) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2 128.53 P2p Te2/1/1 Root FWD 2 128.107 P2p

  Read the article

• hp pavilion g6 1250 wireless problems

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• HP EliteBook 8440p screen flickers after blank screen (nvidia)

  - by fliegenderfrosch

  When my screen turns blank after 10 min or after locking the screen and I begin using the laptop again, the screen is flickering. It looks as if every second line of pixels is blinking and the flickering is mainly present in the upper part of the screen. I am using Ubuntu 12.04 with the latest binary Nvidia drivers (current-updates). lshw | grep VGA tells me: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 3100M] (rev a2) The problem doesn’t occur after sleeping or on an external display. I used Kubuntu 11.10 before, where the problem didn’t occur either. Is there anything I can do except waiting for new drivers?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >