Search Results

Search found 135 results on 6 pages for 'sdd'.

Page 3/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• Is it okay to swap hdds?

  - by terrani

  Hi, I used to use a desktop to work, but I use a laptop now. My desktop has a SSD, so I am planning to format it and use it with my laptop. Then I got a question. Is it okay to just replace my laptop hdd to sdd without formatting?

  Read the article

• Ubuntu Determine HD RPM

  - by Webnet

  How do I determine the RPM speed of the hard drive on my server? I've tried hdparm -i /dev/sda and sginfo -g /dev/sdd, neither of which work.

  Read the article

• convert full-disk RAID5 array to partition-based array?

  - by Delan Azabani

  I have a RAID 5 array, md0, with three full-disk (non-partitioned) members, sdb, sdc, and sdd. My computer will hang during the AHCI BIOS if AHCI is enabled instead of IDE, if these drives are plugged in. I believe it may be because I'm using the whole disk, and the AHCI BIOS expects an MBR to be on the drive (I don't know why it would care). Is there a way to convert the array to use members sdb1, sdc1 and sdd1, partitioned MBR with 0xFD RAID partitions?

  Read the article

• How do I tell mdadm to start using a missing disk in my RAID5 array again?

  - by Jon Cage

  I have a 3-disk RAID array running in my Ubuntu server. This has been running flawlessly for over a year but I was recently forced to strip, move and rebuild the machine. When I had it all back together and ran up Ubuntu, I had some problems with disks not being detected. A couple of reboots later and I'd solved that issue. The problem now is that the 3-disk array is showing up as degraded every time I boot up. For some reason it seems that Ubuntu has made a new array and added the missing disk to it. I've tried stopping the new 1-disk array and adding the missing disk, but I'm struggling. On startup I get this: root@uberserver:~# cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d1 : inactive sdf1[2](S) 1953511936 blocks md0 : active raid5 sdg1[2] sdc1[3] sdb1[1] sdh1[0] 2930279808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] I have two RAID arrays and the one that normally pops up as md1 isn't appearing. I read somewhere that calling mdadm --assemble --scan would re-assemble the missing array so I've tried first stopping the existing array that ubuntu started: root@uberserver:~# mdadm --stop /dev/md_d1 mdadm: stopped /dev/md_d1 ...and then tried to tell ubuntu to pick the disks up again: root@uberserver:~# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 2 drives (out of 3). So that's started md1 again but it's not picking up the disk from md_d1: root@uberserver:~# cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid5 sde1[1] sdf1[2] 3907023872 blocks level 5, 64k chunk, algorithm 2 [3/2] [_UU] md_d1 : inactive sdd1[0](S) 1953511936 blocks md0 : active raid5 sdg1[2] sdc1[3] sdb1[1] sdh1[0] 2930279808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] What's going wrong here? Why is Ubuntu trying to pick up sdd into a different array? How do I get that missing disk back home again? [Edit] - After adding the md1 to mdadm.conf it now tries to mount the array on startup but it's still missing the disk. If I tell it to try and assemble automatically I get the impression it know it needs sdd but can't use it: root@uberserver:~# mdadm --assemble --scan /dev/md1: File exists mdadm: /dev/md/1 already active, cannot restart it! mdadm: /dev/md/1 needed for /dev/sdd1... What am I missing?

  Read the article

• programm and user data from an old hdd to a new installation on ssd

  - by hans wurst

  i tried everything since days, now i ask. i got a ubuntu system on my old hdd, wich is connectet via usb to this system and a sdd is build in my notebook. at the moment i am running a ubuntusystem from an usb stick. it have tried to clone my disk(cahnge uiid, etc), to transport the data via deja dup and much more. the result was nothing or strange things. my idea is to copy the important data form the old system to the new(home and whatever), but it is not allowed to do this. somebody her who know a tool wich can do this, or got an an other idea.

  Read the article

• Unable to install 11.10 to new OCZ Agility 3 SSD

  - by Masi

  I know the discussion here where they are not getting the same error as I. I use Lenovo Thinkpad X60. The default partition table: sd1 ext4 53.91GB, sd2 extended 1.99GB and sd5 swap 1.99GB. I get Input/output error during read on /dev/sda when trying to install from LiveCD -mode and when trying to install directly. I get the error normally at the stage of choosing time zone or very last at choosing the keyboard layout. Then there is the box with buttons: back, ignore and continue. Neither of them put the process forward so I need to cancel it. How can you install Ubuntu to SDD disk?

  Read the article

• Seagate présente un disque dur hybride SSD-HDD, qui diminue le temps de boot par deux

  Seagate présente un disque dur hybride SSD-HDD, qui diminue le temps de boot par deux Après avoir annoncé la sortie d'un disque de 3 To dans l'année, Seagate présente sa nouvelle série de disques durs Momentus XT, de format 2.5". La particularité de cette gamme ? Une hybridation SSD-HDD. Un partie de chaque disque sera en efffet en SDD pour une bonne réactivité, et l'autre sera standard pour offrir une grande capacité de stockage. Le Momentus XT contient ainsi 4 Go de puces SLC permettant d'accélérer l'accès aux fichiers les plus...

  Read the article

• Clean Ubuntu 14.04 install taking longer to boot after kernel upgrade

  - by mvburgos

  Hello this is my first post. I own an Asus Chromebox (2gb ram, 16 gb sdd, 3.0 usb ports) and fresh installed Ubuntu 14.04 x64. I decided to upgrade kernel because I was experiencing some freezing issues with XBMC, So first i installed stable kernel 3.14.04 from mainline and boot time was fine (it booted very fast I would say about 5 seconds) then after a while I installed kernels 3.15 and 3.14.06 BUT this time I also removed OLD STOCK KERNELS (dunno if that has something to do) after that the problem began, boot time is taking way longer, I would say about 30 seconds. Finally today I installed kernel 3.14.07, set grub to boot with that by default but same thing :( I post boot.log and dmesg, hope it is correct for this matter, if you need any other log just let me know. boot.log dmesg

  Read the article

• BASH tr command

  - by user1457809

  Id like to convert it to uppercase for the simple purpose of formatting so it will adhere to a future case statement. As I thought case statements are case sensitive. I see all over the place the tr command used in concert with echo commands to give you immediate results such as: echo "Enter in Location (i.e. SDD-134)" read answer (user enters "cfg" echo $answer | tr '[:lower:]' '[:upper:]' which produced cfg # first echo not upper? echo $answer #echo it again and it is now upper... CFG

  Read the article

• Adding Extra Hard Drives Debian Fdisk

  - by Belgin Fish

  well I just got a new server and it's a little different than what I'm use to, when I run cfdisk I get WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdd: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdd1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdf'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdf: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdf1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sde: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sde1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Usually it tells me which ones arn't partitioned and stuff, and I only have 6 drives in my server and there's 6 showing up here so I'm only assuming the first ones already mounted and formatted correctly? I'm not really sure if anyone would help me out here. Basically I just want to format and mount these drives :)

  Read the article

• SSD for Visual studio : Intel X25-m G2 or OCZ Vertex

  - by meska

  hi, looking for laptop upgrade, and thinking about SSD drive. Laptop would be Dell Studio XPS with T9400 as i can get one for a very good price. So i was thinking about replacing the built in 500 GB hdd with some kind of SDD Currently two choices: OCZ Vertex Series 60 GB vs. Intel X25-M G2 MLC 80 GB Price is almost the same. From anandtech Intel performs badly in sequential write, but scores very high numbers in random write and random read (good for visual studio?) and i get more space. What do you think? OCZ Vertex or Intel X25-M G2 ? Purely from Visual Studio 2008 and upcoming 2010 perspective?

  Read the article

• Removable vs fixed mount points in Linux

  - by Dave

  What makes a mount point removable in Linux? I am using Gentoo Linux with Gnome 3.2, and I find it annoying that some of my drives (ex: /dev/sdb) appear as removable but not the others (ex: /dev/sdc, /dev/sdd). They are all in /etc/fstab, with the same options. They are all mounted properly at startup, they all work fine under my own folders /mnt/drive2 /mnt/drive3 /mnt/drive4. But only one of them (the first) appears in Nautilus (and in the Gnome 3 notification tray) as mountable/removable, not the others. Can I add options to my fstab to hide it? Or can I probe using udevadm or whatever? It looks strange to be able to remove/unmount fixed drives that I never need to unmount nor remove. Any pointer would be good, thanks.

  Read the article

• Why is a ZFS pool not persisting over server restart?

  - by Chance

  I have a ZFS pool with 4 drives. It also has a 3gb ZIL and a 20GB L2ARC that are each partitions on an SDD that doubles as my Linux Mint (ver. 13) boot drive. The pool is mounted to /data. The problem I am running into is that when I restart the server the pool/directory is completely wiped despite having data in it prior. I'm afraid I'm doing something wrong in the setup, which leads me to the following questions: What would cause this? Is there anyway to get the data back? How do I stop it from happening in the future? Thank you in advance! pool: data state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM data ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 sda1 ONLINE 0 0 0 sdb1 ONLINE 0 0 0 sdc1 ONLINE 0 0 0 sdd1 ONLINE 0 0 0 logs sde4 ONLINE 0 0 0 cache sde3 ONLINE 0 0 0 errors: No known data errors

  Read the article

• Openfiler RAID 10 option not found

  - by chrisling106

  Hi, I'm building a NAS using Openfiler2.3 (from 32-bit ISO), first of all I want to experiment it on VM first before going out and buy the harddrives needed. I created 5 virtual drives on VMware, sda is 2GB and the rest 1GB each (sdb to sde). I left sda blank and want to setup a RAID 10 disk using sdb, sdc, sdd and sde, 4 RAID partitions are setup successfully, but when I try to create a RAID device the only option for RAID level is 1, 0, 5 and 6. RAID 10 is not there! Can someone let me know what have I missed, please? TIA.

  Read the article

• Programs minimized for long time takes long time to "wake up"

  - by bart

  I'm working in Photoshop CS6 and multiple browsers a lot. I'm not using them all at once, so sometimes some applications are minimized to taskbar for hours or days. The problem is, when I try to maximize them from the taskbar - it sometimes takes longer than starting them! Especially Photoshop feels really weird for many seconds after finally showing up, it's slow, unresponsive and even sometimes totally freezes for minute or two. It's not a hardware problem as it's been like that since always on all on my PCs. Would I also notice it after upgrading my HDD to SDD and adding RAM (my main PC holds 4 GB currently)? Could guys with powerful pcs / macs tell me - does it also happen to you? I guess OSes somehow "focus" on active software and move all the resources away from the ones that run, but are not used. Is it possible to somehow set RAM / CPU / HDD priorities or something, for let's say, Photoshop, so it won't slow down after long period of inactivity?

  Read the article

• fd partitions gone from 2 discs, md happy with it and resyncs. How to recover ?

  - by d0nd

  Hey gurus, need some help badly with this one. I run a server with a 6Tb md raid5 volume built over 7*1Tb disks. I've had to shut down the server lately and when it went back up, 2 out of the 7 disks used for the raid volume had lost its conf : dmesg : [ 10.184167] sda: sda1 sda2 sda3 // System disk [ 10.202072] sdb: sdb1 [ 10.210073] sdc: sdc1 [ 10.222073] sdd: sdd1 [ 10.229330] sde: sde1 [ 10.239449] sdf: sdf1 [ 11.099896] sdg: unknown partition table [ 11.255641] sdh: unknown partition table All 7 disks have same geometry and were configured alike : dmesg : Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect All 7 disks (sdb1, sdc1, sdd1, sde1, sdf1, sdg1, sdh1) were used in a md raid5 xfs volume. When booting, md, which was (obviously) out of sync kicked in and automatically started rebuilding over the 7 disks, including the two "faulty" ones; xfs tried to do some shenanigans as well: dmesg : [ 19.566941] md: md0 stopped. [ 19.817038] md: bind<sdc1> [ 19.817339] md: bind<sdd1> [ 19.817465] md: bind<sde1> [ 19.817739] md: bind<sdf1> [ 19.817917] md: bind<sdh> [ 19.818079] md: bind<sdg> [ 19.818198] md: bind<sdb1> [ 19.818248] md: md0: raid array is not clean -- starting background reconstruction [ 19.825259] raid5: device sdb1 operational as raid disk 0 [ 19.825261] raid5: device sdg operational as raid disk 6 [ 19.825262] raid5: device sdh operational as raid disk 5 [ 19.825264] raid5: device sdf1 operational as raid disk 4 [ 19.825265] raid5: device sde1 operational as raid disk 3 [ 19.825267] raid5: device sdd1 operational as raid disk 2 [ 19.825268] raid5: device sdc1 operational as raid disk 1 [ 19.825665] raid5: allocated 7334kB for md0 [ 19.825667] raid5: raid level 5 set md0 active with 7 out of 7 devices, algorithm 2 [ 19.825669] RAID5 conf printout: [ 19.825670] --- rd:7 wd:7 [ 19.825671] disk 0, o:1, dev:sdb1 [ 19.825672] disk 1, o:1, dev:sdc1 [ 19.825673] disk 2, o:1, dev:sdd1 [ 19.825675] disk 3, o:1, dev:sde1 [ 19.825676] disk 4, o:1, dev:sdf1 [ 19.825677] disk 5, o:1, dev:sdh [ 19.825679] disk 6, o:1, dev:sdg [ 19.899787] PM: Starting manual resume from disk [ 28.663228] Filesystem "md0": Disabling barriers, not supported by the underlying device [ 28.663228] XFS mounting filesystem md0 [ 28.884433] md: resync of RAID array md0 [ 28.884433] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 28.884433] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [ 28.884433] md: using 128k window, over a total of 976759936 blocks. [ 29.025980] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 32.680486] XFS: xlog_recover_process_data: bad clientid [ 32.680495] XFS: log mount/recovery failed: error 5 [ 32.682773] XFS: log mount failed I ran fdisk and flagged sdg1 and sdh1 as fd. I tried to reassemble the array but it didnt work: no matter what was in mdadm.conf, it still uses sdg and sdh instead of sdg1 and sdh1. I checked in /dev and I see no sdg1 and and sdh1, shich explains why it wont use it. I just don't know why those partitions are gone from /dev and how to readd those... blkid : /dev/sda1: LABEL="boot" UUID="519790ae-32fe-4c15-a7f6-f1bea8139409" TYPE="ext2" /dev/sda2: TYPE="swap" /dev/sda3: LABEL="root" UUID="91390d23-ed31-4af0-917e-e599457f6155" TYPE="ext3" /dev/sdb1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdc1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdd1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sde1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdf1: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdg: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" /dev/sdh: UUID="2802e68a-dd11-c519-e8af-0d8f4ed72889" TYPE="mdraid" fdisk -l : Disk /dev/sda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8c878c87 Device Boot Start End Blocks Id System /dev/sda1 * 1 12 96358+ 83 Linux /dev/sda2 13 134 979965 82 Linux swap / Solaris /dev/sda3 135 4865 38001757+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x1e7481a5 Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc9bdc1e9 Device Boot Start End Blocks Id System /dev/sdc1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xcc356c30 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe87f7a3d Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xb17a2d22 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdg: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x8f3bce61 Device Boot Start End Blocks Id System /dev/sdg1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdh: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa98062ce Device Boot Start End Blocks Id System /dev/sdh1 1 121601 976760001 fd Linux raid autodetect I really dont know what happened nor how to recover from this mess. Needless to say the 5TB or so worth of data sitting on those disks are very valuable to me... Any idea any one? Did anybody ever experienced a similar situation or know how to recover from it ? Can someone help me? I'm really desperate... :x

  Read the article

• Disable or sleep secondary hard drive in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original hard drive to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the hard drive is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the hard drive when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it.

  Read the article

• which drive do I mount

  - by Crash893

  I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

  Read the article

• Disable or sleep secondary HDD in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

  Read the article

• Debian Raid5 LVM

  - by Develman

  I want to setup a debian server mainly used as data storage. I have 4 devices: /dev/sda (160GB) - installed debian on it /dev/sdb, /dev/sdc, /dev/sdd (all 500GB) - created a raid5 array with it Now I am not sure, how to go on. Is it usefull to create a LVM on the raid5 /dev/md0? How can I do this? Is there a good HowTo? Or can I just create filesystem on the raid5 and create different partitions?

  Read the article

• iMac boot from linux partition on external drive

  - by user74757

  I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

  Read the article

• ACHI drivers for W8.1 with amd

  - by LeiNaD_87

  I hope you can help me... I just installed a SSD (Samsung EVO 840) and windows 8.1 pro in my pc with M5A99X EVO ( chipset AMD 990X/SB950 ) motherboard. The SSD is installed in sata3 socket using a sata3 wire. The AHCI mode is ON in the bios. I configured the ahci controller and now device administrator looks like this: All works, but the speed of the SDD is very slow (like a HDD). Samsung magician doesn't recognize the sata mode neither the ahci. I tried to install more drivers but the system broke and I need to reinstall windows :( I tried many things from the web, but any works: Modify windows registy Use compatibility mode Modify the amd drivers and install it unsigned Thank you for your time!! EDIT to add a CrystalDiskMark benchmark

  Read the article

• Cannot read/write a second drive in MBP 13

  - by Carlos

  I changed my original HDD for a SDD earlier this year and I just got one more SSD for my MBP 13 (2012) that I used to replace DVD drive. I'm using Mountain Lion. The SSD looks to be recognized allright, but I can't format it. Then I removed the main drive and tried the new one as the main drive and did the boot using a USB drive with MAC OS and everyhing worked as it should (like I just had one drive). However when I bring the first drive back together with the second they both show up but I can't use it. Seems like I have no permission, but when I look at it's properties it says I can read and write to it. Any ideas? Thanks a lot!

  Read the article

• Logical volume that spans raid1 sets: what happens if a RAID fails?

  - by Jeff Shattock

  Consider the following scenario: /dev/md0 - 10GB RAID 1 volume built from /dev/sda and /dev/sdb /dev/md1 - 10GB RAID 1 volume built from /dev/sdc and /dev/sdd /dev/vg0 - volume group containing md0 and md1 /dev/vg0/lv0 - 15GB logical volume The raid devices are created with mdadm; the logical volumes by LVM. What happens to lv0 if md0 fails entirely? That is, if both sda and sdb disintegrate so that the md0 device can not start. Is the portion of the data that resided on md1 still accessible, or is the entire LV gone? Would the answer change if lv0 were created as a striped volume vs non-striped?

  Read the article

• Converting ASUS Zenbook from Win8 to Win7.. do i need raid drivers?

  - by BrownChiLD

  I've got an ASUS ZEnBook Prime, ASUS Zenbook UX301LA-XH72T 13.3" Touch Ultrabook and it runs 500GB SDD on RAID 0 configuration. This notebook is running Windows 8, and i desperately need to convert to Windows 7, but maintain RAID 0 configuration. My question is, will i have problems maintaining RAID 0 once converted? I would assume that the RAID 0 configuration is BIOS based and WINDOWS wont even know it, and will only see 1 drive regardless... right? Or will i need to do some weird Windows stuff to maintain RAID 0 config? = which doesn't make sense to me why it would.

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >