Search Results

Search found 150 results on 6 pages for 'tiled'.

Page 3/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• No GLX on Intel card with multiseat with additional nVidia card

  - by MeanEYE

  I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

  Read the article

• OpenGL equivalent of GDI's HatchBrush or PatternBrush?

  - by Ptah- Opener of the Mouth

  I have a VB6 application (please don't laugh) which does a lot of drawing via BitBlt and the standard VB6 drawing functions. I am running up against performance issues (yes, I do the regular tricks like drawing to memory). So, I decided to investigate other ways of drawing, and have come upon OpenGL. I've been doing some experimenting, and it seems straightforward to do most of what I want; the application mostly only uses very simple drawing -- relatively large 2D rectangles of solid colors and such -- but I haven't been able to find an equivalent to something like a HatchBrush or PatternBrush. More specifically, I want to be able to specify a small monochrome pixel pattern, choose a color, and whenever I draw a polygon (or whatever), instead of it being solid, have it automatically tiled with that pattern, not translated or rotated or skewed or stretched, with the "on" bits of the pattern showing up in the specified color, and the "off" bits of the pattern left displaying whatever had been drawn under the area that I am now drawing on. Obviously I could do all the calculations myself. That is, instead of drawing as a polygon which will somehow automatically be tiled for me, I could calculate all of the lines or pixels or whatever that actually need to be drawn, then draw them as lines or pixels or whatever. But is there an easier way? Like in GDI, where you just say "draw this polygon using this brush"? I am guessing that "textures" might be able to accomplish what I want, but it's not clear to me (I'm totally new to this and the documentation I've found is not entirely obvious); it seems like textures might skew or translate or stretch the pattern, based upon the vertices of the polygon? Whereas I want the pattern tiled. Is there a way to do this, or something like it, other than brute force calculation of exactly the pixels/lines/whatever that need to be drawn? Thanks in advance for any help.

  Read the article

• Improving SpriteBatch performance for tiles

  - by Richard Rast

  I realize this is a variation on what has got to be a common question, but after reading several (good answers) I'm no closer to a solution here. So here's my situation: I'm making a 2D game which has (among some other things) a tiled world, and so, drawing this world implies drawing a jillion tiles each frame (depending on resolution: it's roughly a 64x32 tile with some transparency). Now I want the user to be able to maximize the game (or fullscreen mode, actually, as its a bit more efficient) and instead of scaling textures (bleagh) this will just allow lots and lots of tiles to be shown at once. Which is great! But it turns out this makes upward of 2000 tiles on the screen each time, and this is framerate-limiting (I've commented out enough other parts of the game to make sure this is the bottleneck). It gets worse if I use multiple source rectangles on the same texture (I use a tilesheet; I believe changing textures entirely makes things worse), or if you tint the tiles, or whatever. So, the general question is this: What are some general methods for improving the drawing of thousands of repetitive sprites? Answers pertaining to XNA's SpriteBatch would be helpful but I'm equally happy with general theory. Also, any tricks pertaining to this situation in particular (drawing a tiled world efficiently) are also welcome. I really do want to draw all of them, though, and I need the SpriteMode.BackToFront to be active, because

  Read the article

• How do I load tmx files with Slick2d?

  - by mbreen

  I just started using Slick2D and learned how simple it is to load in a tilemap and display it. I tried atleast a dozen different tmx files from numerous examples to see if it was the actual file that was corrupted. Everytime I get this error: Exception in thread "main" java.lang.RuntimeException: Resource not found: data/maps/desert.tmx at org.newdawn.slick.util.ResourceLoader.getResourceAsStream(ResourceLoader.java:69) at org.newdawn.slick.tiled.TiledMap.<init>(TiledMap.java:101) at game.Game.init(Game.java:17) at game.Tunneler.initStatesList(Tunneler.java:37) at org.newdawn.slick.state.StateBasedGame.init(StateBasedGame.java:164) at org.newdawn.slick.AppGameContainer.setup(AppGameContainer.java:390) at org.newdawn.slick.AppGameContainer.start(AppGameContainer.java:314) at game.Tunneler.main(Tunneler.java:29) Here is my Game class: package game; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.SlickException; import org.newdawn.slick.state.BasicGameState; import org.newdawn.slick.state.StateBasedGame; import org.newdawn.slick.tiled.TiledMap; public class Game extends BasicGameState{ private int stateID = -1; private TiledMap map = null; public Game(int stateID){ this.stateID = stateID; } public void init(GameContainer container, StateBasedGame game) throws SlickException{ map = new TiledMap("data/maps/desert.tmx","maps");//ERROR } public void render(GameContainer container, StateBasedGame game, Graphics g) throws SlickException{ //map.render(0,0); } public void update(GameContainer container, StateBasedGame game, int delta) throws SlickException{ } public int getID(){return stateID;} } I've tried to see if anyone else has had similar problems but haven't turned up anything. I am able to load other files, so I don't believe it's a compiler issue. My menu class can load images and display them just fine. Also, the filepath is correct. Please let me know if you have any pointers that might help me sort this out.

  Read the article

• Slick2D + LWJGL collision system

  - by Connor W

  So I've been learning java for a while and have explored slick and lwjgl before but went away from using Slick for a while. But I've recently gone back to using it (as I'm making a platformer and Tiled will be really helpful). But here's where my problems begin: collision. I have a player polygon and I check to see if it's colliding with my tiled map with this method: public static boolean playerCollisionWith() { for(int i = 0; i < Blockmap.entities.size(); i++) { Block entity1 = (Block) Blockmap.entities.get(i); if(playerPoly.intersects(entity1.poly)) { return true; } } return false; } This would work normally but I'm using a different method for movement. Instead of just adding a speed variable to the player's x axis. I move like this: if(Keyboard.isKeyDown(Keyboard.KEY_RIGHT)) { speedX = Math.min(5, speedX + 1); moving = true; playerPoly.setX(x); if(playerCollisionWith()) { speedX = -5; playerPoly.setX(x); } } That Math.min call is what is messing me up =. I can't just call speedX = -5, because when I do the player "bounces" when the right mouse button is down and it's colliding. Bounces as in flashes back and forth REALLY quickly. But I don't really know how I would make it so that collisions on the y axis would work either, whether the player is jumping or not. So if I could get some help with how to fix this problem that would be great. Thank you for the help!

  Read the article

• Libgdx ParallaxScrolling and TiledMaps

  - by kirchhoff

  I implemented ParallaxScrolling for my SideScroller project, everything is working but the tiled map (the most important part!). I've been trying out everything but it doesn't work (see the code below). I'm using ParallaxCamera from GdxTests, it's working perfectly for the background layers. I can't explain myself properly in english, so I recorded 2 videos: Before parallaxScrolling After parallaxScrolling As you can see, now the platforms appear in the middle of the Y-axis. I've got a Map class with 2 tiled maps, so I need two renderers too: private TiledMapRenderer renderer1; private TiledMapRenderer renderer2; public void update(GameCamera camera) { renderer1.setView(camera.calculateParallaxMatrix(1f, 0f), camera.position.x - camera.viewportWidth / 2, **camera.position.y - camera.viewportHeight/2**, camera.viewportWidth, camera.viewportHeight); renderer2.setView(camera.calculateParallaxMatrix(1f, 0f), camera.position.x - camera.viewportWidth / 2, **camera.position.y - camera.viewportHeight/2**, camera.viewportWidth, camera.viewportHeight); } In bold, the code I think I should change. I've tried changing parameters, even adding hardcoded values, etc, but one of two: 1. Nothing happens. 2. Platforms disappear. Here is some aditional code. The render method: world.update(delta); parallaxBackground.update(camera); clear(0.5f, 0.7f, 1.0f, 1); batch.setProjectionMatrix(camera.calculateParallaxMatrix(0, 0)); batch.disableBlending(); batch.begin(); batch.draw(background, -(int)background.getRegionWidth()/2, -(int)background.getRegionHeight()/2); batch.end(); batch.enableBlending(); parallaxBackground.draw(batch, camera); renderer.render(batch);

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Ubuntu 12.04 dual monitor reset bug

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• How can I set my screen resolution to match my TV?

  - by Scott Severance

  I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

  Read the article

• Making a Png Image transparent in older versions of Internet Explorer...

  - by GUNNOO

  Hello People i have a problem with the png formatted images, i used some PNG images in my mock. when i view the mock in I.E the background of the images are not transparent. i got one solution for making it trasparent in "I.E" from the previous POSTS in the Forum. But my Problem is, i want that image to be tiled horizantlly...using that Filter thing. can any one solve this plz....plz.... i need a solution for making a png in I.E and at the same time it shud be tiled horizontally.

  Read the article

• xrandr shows two displays (LVDS1), but how can I use VGA1 only?

  - by Tom Fishman

  We're running Ubuntu 11 on this hardware: Foxconn R20-D2 Intel Atom D510 Intel NM10 Intel GMA 3150 Barebone There is no integrated display (it is a barebone box). I connected an external VGA to it. However xrandr shows two displays: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0 + 1600x1200 60.0 1680x1050 60.0 1280x1024 76.0 75.0 72.0 60.0 1440x900 75.0 59.9 1152x864 75.0 1024x768 75.1 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 640x480 72.8 75.0 66.7 60.0 720x400 70.1 But I don't have two displays. How can I get rid of LVDS1 and use only VGA1? The direct result is that I'm seeing a 1024x768 resolution on my VGA display, because the OS is using "mirror" mode which uses the lower resolution of the two. Turning off the mirror is not a solution. I want to fix it. Related logs: ... [ 20.019] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.019] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.019] (==) intel(0): RGB weight 888 [ 20.019] (==) intel(0): Default visual is TrueColor [ 20.019] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview G [ 20.019] (--) intel(0): Chipset: "Pineview G" [ 20.019] (**) intel(0): Relaxed fencing enabled [ 20.019] (**) intel(0): Wait on SwapBuffers? enabled [ 20.019] (**) intel(0): Triple buffering? enabled [ 20.019] (**) intel(0): Framebuffer tiled [ 20.019] (**) intel(0): Pixmaps tiled [ 20.020] (**) intel(0): 3D buffers tiled [ 20.020] (**) intel(0): SwapBuffers wait enabled [ 20.020] (==) intel(0): video overlay key set to 0x101fe [ 20.020] (II) intel(0): Output LVDS1 has no monitor section [ 20.020] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 20.080] (II) intel(0): Output VGA1 has no monitor section [ 20.080] (II) intel(0): EDID for output LVDS1 [ 20.081] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 20.081] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) ... [ 20.082] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 20.082] (II) intel(0): Printing probed modes for output LVDS1 [ 20.082] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 20.082] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 20.082] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.149] (II) intel(0): EDID for output VGA1 [ 20.149] (II) intel(0): Manufacturer: BNQ Model: 771b Serial#: 6595 [ 20.149] (II) intel(0): Year: 2008 Week: 16 [ 20.149] (II) intel(0): EDID Version: 1.3 [ 20.149] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V ... [ 20.152] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 20.152] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) [ 20.152] (II) intel(0): Output LVDS1 connected [ 20.152] (II) intel(0): Output VGA1 connected [ 20.152] (II) intel(0): Using exact sizes for initial modes [ 20.152] (II) intel(0): Output LVDS1 using initial mode 1024x768 [ 20.152] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 20.152] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. ...

  Read the article

• Zelda-style Top-down RPG. Storing data for each tile type

  - by Delerat

  I'm creating a Zelda-style RPG using Tiled, C#, and MonoGame. When my code parses the .tmx file, it will get a number to associate with each tile type based off of their position in the tile sheet. If I ever need to change my sprite sheet, this number will change for many of the tiles. How can I guarantee that when I parse my .tmx file, I will be able to know exactly what tile type I'm getting so that I can associate the proper data with it(transparency, animated, collision, etc.)?

  Read the article

• How can I create a flexible system for tiling a 2D RPG map?

  - by CptSupermrkt

  Using libgdx here. I've just finished learning some of the basics of creating a 2D environment and using an OrthographicCamera to view it. The tutorials I went through, however, hardcoded their tiled map in, and none made mention of how to do it any other way. By tiled map, I mean like Final Fantasy 1, where the world map is a grid of squares, each with a different texture. So for example, I've got a 6 tile x 6 tile map, using the following code: Array<Tile> tiles = new Array<Tile>(); tiles.add(new Tile(new Vector2(0,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(1,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(2,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(3,5), TileType.GRASS)); tiles.add(new Tile(new Vector2(4,5), TileType.STONE)); tiles.add(new Tile(new Vector2(5,5), TileType.STONE)); //... x5 more times. Given the random nature of the environment, for loops don't really help as I have to start and finish a loop before I was able to do enough to make it worth setting up the loop. I can see how a loop might be helpful for like tiling an ocean or something, but not in the above case. The above code DOES get me my final desired output, however, if I were to decide I wanted to move a piece or swap two pieces out, oh boy, what a nightmare, even with just a 6x6 test piece, much less a 1000x1000 world map. There must be a better way of doing this. Someone on some post somewhere (can't find it now, of course) said to check out MapEditor. Looks legit. The question is, if that is the answer, how can I make something in MapEditor and have the output map plug in to a variable in my code? I need the tiles as objects in my code, because for example, I determine whether or not a tile is can be passed through or collided with based on my TileTyle enum variable. Are there alternative/language "native" (i.e. not using an outside tool) methods to doing this?

  Read the article

• 2d, Top-down map with different levels

  - by Ktash

  So, I'm creating a 2d, top down, sprite based (tiled) game, and right now I'm working on maps (well, a map editor at the moment, but it will be creating my maps, so basically the same thing). The scenario So, I'm thinking about efficiency and creating a map in pieces. In each piece, I plan on having 'layers'. Basically, I plan on rendering it down to a 'below hero' level, and an 'above hero' level, with the hero rendered in between obviously. There will likely also be a 'on level with hero' layer, but I'm not quite there yet. Not even worrying about events or interaction yet. Just looking to get a hero on the screen. Now for movement, I obviously need to know what tiles can be moved and in what direction. My plan at the moment is each tile getting 8 bits (4 'can enter in direction' bits, 4 'can leave in direction'). This will allow me to limit movement and even allow one way directional movement. The dilemma This works great for a lot of scenarios. It will allow me to store a map in essentially 3 layers, a string, and gives me flexibility going forward. However, I can't create maps that themselves have layers. A good example is a bridge where the user can go under or over the bridge without invalid moves being allowed. I can't create a platform and allow movement underneath. These are things I would like to be able to include in my game. My idea In theory, I could allow multiple hero layers and then allow multiple sets of 'below' and 'above' layers (or sandwich layers). But this complicates my system, and makes movement between maps potentially tricky (If the hero is on the third layer at the edge of a map, but that corresponds to the second layer on the other map, how can I allow or disallow movement). My question Is there a better way to manage multiple maps with multiple levels like this where a users level may be 'connected' on different levels on different maps? Or even... Am I doing this the hard way? Is there a more standard way to handle top-down 2d tiled maps that I am just not aware of? Things to note or that might be helpful This will be done in Javascript (transferred around in JSON) State will need to be transferred quickly, so a map-id and x/y/direction should be enough to get me a boolean 'can move' value Maps will not be standard sized (though they will be in a certain number of tiles) Making an editor tool so that I can have others help, so something that I can create in a tool would be helpful 'Teleportation' locations will likely need to exist to get into building maps and to and from different map sets (which will not necessarily be connected), but have not been created yet (lumping in with events at the moment).

  Read the article

• Zelda-style top-down RPG. How to store tile and collision data?

  - by Delerat

  I'm looking to build a Zelda: LTTP style top-down RPG. I've read a lot on the subject and am currently going back and forth on a few solutions. I'm using C#, MonoGame, and Tiled. For my tile maps, these are the choices I can see in front of me: Store each tile as its own array. Each one having 3-4 layers, texture/animation, depth, flags, and maybe collision(depending on how I do it). I've read warning about memory issues going this route, and my biggest map will probably be 160x120 tiles. My average map however will be about 40x30. The number of tiles might cut in half if I decide to double my tile size, which is currently 16x16. This is the most appealing approach for me, as I feel like I would know how to save maps, make changes, and separate it into chunks for collision checks. Store the static parts of my tile map in multiple arrays acting as the different layers. Then I would just use entities for anything that wasn't static. All of the other tile data such as collisions, depth, etc., would be stored in their own layers as well I guess? This way just seems messy to me though. Regardless of which one I choose, I'm also unsure how to plan all of that other tile data. I could write a bunch of code that would know which integer represents what tile and it's data, but if I changed a tileset in Tiled and exported it again, all of those integers could potentially change and I'd have to adjust a whole bunch of code. My other issue is about how I could do collision. I want to at least support angled collision that slides you around the corners of objects like LTTP does, if not more oddball shapes as well. So do I: Store collision as a flag for binary collision. Could I get this to support angles? Would it be fine to store collision as an integer and have each number represent a certain angle of collision? Store a list of rectangles or other shapes and do collision that way? Sorry for the large two-part(three-part?) question. I felt like these needed to be asked together as I believe each choice influences the other.

  Read the article

• XSL Template outputting massive chunk of text, rather than HTML. But only on one section

  - by Throlkim

  I'm having a slightly odd situation with an XSL template. Most of it outputs fine, but a certain for-each loop is causing me problems. Here's the XML: <area> <feature type="Hall"> <Heading><![CDATA[Hall]]></Heading> <Para><![CDATA[Communal gardens, pathway leading to PVCu double glazed communal front door to]]></Para> </feature> <feature type="Entrance Hall"> <Heading><![CDATA[Communal Entrance Hall]]></Heading> <Para><![CDATA[Plain ceiling, centre light fitting, fire door through to inner hallway, wood and glazed panelled front door to]]></Para> </feature> <feature type="Inner Hall"> <Heading><![CDATA[Inner Hall]]></Heading> <Para><![CDATA[Plain ceiling with pendant light fitting and covings, security telephone, airing cupboard housing gas boiler serving domestic hot water and central heating, telephone point, storage cupboard housing gas and electric meters, wooden panelled doors off to all rooms.]]></Para> </feature> <feature type="Lounge (Reception)" width="3.05" length="4.57" units="metre"> <Heading><![CDATA[Lounge (Reception)]]></Heading> <Para><![CDATA[15' 6" x 10' 7" (4.72m x 3.23m) Window to the side and rear elevation, papered ceiling with pendant light fitting and covings, two double panelled radiators, power points, wall mounted security entry phone, TV aerial point.]]></Para> </feature> <feature type="Kitchen" width="3.05" length="3.66" units="metre"> <Heading><![CDATA[Kitchen]]></Heading> <Para><![CDATA[12' x 10' (3.66m x 3.05m) Double glazed window to the rear elevation, textured ceiling with strip lighting, range of base and wall units in Beech with brushed aluminium handles, co-ordinated working surfaces with inset stainless steel sink with mixer taps over, co-ordinated tiled splashbacks, gas and electric cooker points, large storage cupboard with shelving, power points.]]></Para> </feature> <feature type="Entrance Porch"> <Heading><![CDATA[Balcony]]></Heading> <Para><![CDATA[Views across the communal South facing garden, wrought iron balustrade.]]></Para> </feature> <feature type="Bedroom" width="3.35" length="3.96" units="metre"> <Heading><![CDATA[Bedroom One]]></Heading> <Para><![CDATA[13' 6" x 11' 5" (4.11m x 3.48m) Double glazed windows to the front and side elevations, papered ceiling with pendant light fittings and covings, single panelled radiator, power points, telephone point, security entry phone.]]></Para> </feature> <feature type="Bedroom" width="3.05" length="3.35" units="metre"> <Heading><![CDATA[Bedroom Two]]></Heading> <Para><![CDATA[11' 4" x 10' 1" (3.45m x 3.07m) Double glazed window to the front elevation, plain ceiling with centre light fitting and covings, power points.]]></Para> </feature> <feature type="bathroom"> <Heading><![CDATA[Bathroom]]></Heading> <Para><![CDATA[Obscure double glazed window to the rear elevation, textured ceiling with centre light fitting and extractor fan, suite in white comprising of low level WC, wall mounted wash hand basin and walk in shower housing 'Triton T80' electric shower, co-ordinated tiled splashbacks.]]></Para> </feature> </area> And here's the section of my template that processes it: <xsl:for-each select="area"> <li> <xsl:for-each select="feature"> <li> <h5> <xsl:value-of select="Heading"/> </h5> <xsl:value-of select="Para"/> </li> </xsl:for-each> </li> </xsl:for-each> And here's the output: Hall Communal gardens, pathway leading to PVCu double glazed communal front door to Communal Entrance Hall Plain ceiling, centre light fitting, fire door through to inner hallway, wood and glazed panelled front door to Inner Hall Plain ceiling with pendant light fitting and covings, security telephone, airing cupboard housing gas boiler serving domestic hot water and central heating, telephone point, storage cupboard housing gas and electric meters, wooden panelled doors off to all rooms. Lounge (Reception) 15' 6" x 10' 7" (4.72m x 3.23m) Window to the side and rear elevation, papered ceiling with pendant light fitting and covings, two double panelled radiators, power points, wall mounted security entry phone, TV aerial point. Kitchen 12' x 10' (3.66m x 3.05m) Double glazed window to the rear elevation, textured ceiling with strip lighting, range of base and wall units in Beech with brushed aluminium handles, co-ordinated working surfaces with inset stainless steel sink with mixer taps over, co-ordinated tiled splashbacks, gas and electric cooker points, large storage cupboard with shelving, power points. Balcony Views across the communal South facing garden, wrought iron balustrade. Bedroom One 13' 6" x 11' 5" (4.11m x 3.48m) Double glazed windows to the front and side elevations, papered ceiling with pendant light fittings and covings, single panelled radiator, power points, telephone point, security entry phone. Bedroom Two 11' 4" x 10' 1" (3.45m x 3.07m) Double glazed window to the front elevation, plain ceiling with centre light fitting and covings, power points. Bathroom Obscure double glazed window to the rear elevation, textured ceiling with centre light fitting and extractor fan, suite in white comprising of low level WC, wall mounted wash hand basin and walk in shower housing 'Triton T80' electric shower, co-ordinated tiled splashbacks. For reference, here's the entire XSLT: http://pastie.org/private/eq4gjvqoc1amg9ynyf6wzg The rest of it all outputs fine - what am I missing from the above section?

  Read the article

• Generate jpeg compressed Tiff using RGB colorspace (using Java + JAI)

  - by nOiSe gaTe

  I'm trying to make tiled pyramidal tiffs from master tiff images using Java (JAI 1.1.3 + imageIO). The problem is: I NEED to make tiff files compressed in jpeg with RGB photometric interpretation and no matter what I try, the image still faces YCbCr photometric interpretation. Note: if I change compression type (eg. LZW or Deflate) I can get RGB colorspace but, as I said, I need jpeg compression. Except this detail the tiled PTiff I create it's ok, so I think it's better to focus the attention on simple compression step (uncompressed tiff -- jpeg tiff) this may be a basic example (removing any check to make it more readable) // reading MASTER BufferedImage img = ImageIO.read(uncompressedTiff); ImageOutputStream ios=null; ImageWriter writer=null; ios = ImageIO.createImageOutputStream(outFile); Iterator <ImageWriter> writers = ImageIO.getImageWritersByFormatName("tiff"); writer = writers.next(); // saving and compression params writer.setOutput(ios); ImageWriteParam param = writer.getDefaultWriteParam(); param.setCompressionMode(ImageWriteParam.MODE_EXPLICIT); param.setCompressionType("JPEG"); param.setCompressionQuality(0.8f); param.setTilingMode(ImageWriteParam.MODE_EXPLICIT); param.setTiling(256, 256, 0, 0); IIOMetadata metadata = getWriteMD(writer, param); // writing writer.write(metadata, new IIOImage(img, null, metadata), param); in getWriteMD method: .... TIFFTag photoInterp = base.getTag(BaselineTIFFTagSet.TAG_PHOTOMETRIC_INTERPRETATION); TIFFField fieldPhotoInter = new TIFFField(photoInterp, BaselineTIFFTagSet.PHOTOMETRIC_INTERPRETATION_RGB); .... here is the full version of getWriteMD()

  Read the article

• How can you transform a set of numbers into mostly whole ones?

  - by Alice

  Small amount of background: I am working on a converter that bridges between a map maker (Tiled) that outputs in XML, and an engine (Angel2D) that inputs lua tables. Most of this is straight forward However, Tiled outputs in pixel offsets (integers of absolute values), while Angel2D inputs OpenGL units (floats of relative values); a conversion factor between these two is needed (for example, 32px = 1gu). Since OpenGL units are abstract, and the camera can zoom in or out if the objects are too small or big, the actual conversion factor isn't important; I could use a random number, and the user would merely have to zoom in or out. But it would be best if the conversion factor was selected such that most numbers outputted were small and whole (or fractions of small whole numbers), because that makes it easier to work with (and the whole point of the OpenGL units is that they are easy to work with). How would I find such a conversion factor reliably? My first attempt was to use the smallest number given; this resulted in no fractions below 1, but often lead to lots of decimal places where the factors didn't line up. Then I tried the mode of the sequence, which lead to the largest number of 1's possible, but often lead to very long floats for background images. My current approach gets the GCD of the whole sequence, which, when it works, works great, but can easily be thrown off course by a single bad apple. Note that while I could easily just pass the numbers I am given along, or pick some fixed factor, or use one of the conversions I specified above, I am looking for a method to reliably scale this list of integers to small, whole numbers or simple fractions, because this would most likely be unsurprising to the end user; this is not a one off conversion. The end users tend to use 1.0 as their "base" for manipulations (because it's simple and obvious), so it would make more sense for the sizes of entities to cluster around this.

  Read the article

• "Must Have" Text/Terminal applications?

  - by timepilot

  I spend most of my time in Linux using tiled window managers such as Awesome or DWM. As a result, prefer to use text/terminal applications. Some of my favorites are: Vim, mc, Htop, MOC, GNU Screen, WeeChat, rTorrent, ELinks and Lynx. What are your must-install text/terminal applications?

  Read the article

• Cocos2d+pybox2d vs Cocos2d-Iphone

  - by DraskyVanderhoff

  I'm now working with two guys for making our first pc indie game and we decide to use cocos2d+pybox2d ( yeah , 2d python game :) ). We decide this based on what i seen in cocos2d iphone games , but i don't get very clear if cocos2d-iphone is just a porting with just a little more features or is far more better than cocos2d for pc. If you can get me out of this dilemma it would be great. I just want to be sure that i'm on the right track ( and also i want to porting this game for android and iphone if it got success in pc , but first my lovely pc :P ) PD: For the maps we will use Tiled , so is totally compatible with cocos2d ( any of both cases i think... )

  Read the article

• Silverlight Cream for February 26, 2011 -- #1052

  - by Dave Campbell

  In this Issue: Mark Monster, Gill Cleeren, Pencho Popadiyn, Kevin Dockx, Joost van Schaik, Jesse Liberty, John Papa, Jeremy Likness, Arik Poznanski(-2-), Page Brooks, Deborah Kurata, Mike Snow, Alfred Astort, Samuel Jack, XAMLNinja, and Shawn Wildermuth. Above the Fold: Silverlight: "Asynchronous Callbacks with Rx" Jesse Liberty WP7: "Phoney Windows Phone 7 Project Now Available!" Shawn Wildermuth MVVM: "Validating our ViewModel" Mark Monster Shoutouts: Shawn Wildermuth has a video up of his FadingMessage class to show it off: Introducing Phoney's FadingMessage Class From SilverlightCream.com: Validating our ViewModel Mark Monster discusses Validation in his latest post... using INotifyDataErrorInfo and his own implementation of a ViewModel base that supports it and INPC. Getting ready for Microsoft Silverlight Exam 70-506 (Part 7) Gill Cleeren hits part 7 of his series at SilverlightShow on a great walk through Silverlight and getting ready for the exam. This is the final part and concentrates on deploying apps. Windows Phone 7–Creating Custom Keyboard Pencho Popadiyn has a post at SilverlightShow discussing problems with WP7 keyboards in his native Bulgaria, and his solution to the problem... create his own. 360 Degrees Feedback by Kevin Dockx Kevin Dockx produced a white paper for his company about an employee review solution they did in Silverlight. The white paper is available, and SilverlightShow interviewd Kevin to answer questions about the app. Extended Windows Phone 7 page for handling rotation, focused element updates and back key press Looks like Joost van Schaik has a few posts I've missed... and I'm not going to get to them all today! ... this one is about the base class he uses for WP7 apps... a bunch of utilities he uses... definitely worth a look (and a take). Asynchronous Callbacks with Rx Jesse Liberty has his 8th post in the Rx series up and this one's on Asynchronous Callbacks... if you haven't seen this before, you should definitely look into it... cool stuff, Jesse! Silverlight TV 63: Exploring National Instruments' App Using Data and Business Features John Papa has Silverlight TV number 63 up and is talking to Steve Lasker about National Instruments and their Lab View product. Great demo and discussion. Jounce Part 11: Debugging MEF Jeremy Likness's latest (number 11) in his series on his MVVM framework Jounce is out, and he's discussing how to debug MEF, which Jounce handles nicely through the logging he provides... and you can use it externally to Jounce. Get Twitter Trends on Windows Phone 7 Arik Poznanski has a couple Twitter for WP7 posts up... first is one for pulling Twitter trends from whatthetrend.com... plus the code to do it. Searching Twitter on Windows Phone 7 In his next post, Arik Poznanski shows how to search twitter from your WP7 ... again with code. Tiled Background Control in Silverlight Page Brooks shows how to get a tiled background control in Silverlight ... did you know there was one in the JetPack them? Silverlight Charting: Displaying Data Above the Column Deborah Kurata continues her charting posts with this one displaying the column value above the column. I like this... it has a clean look and all the data is available at a glance. Silverlight: Tasks on the Win7 Mobile Phone Mike Snow has a list of the WP7 tasks available and an example of using them... looks like a pretty good reference! 10 of 10 - Aesthetics and alignment matter Alfred Astort discusses aesthetics and WP7 dev... looks like it's the same as any app development, but if you're not doing it, you should be. Simon Squared – We have Multi-player: Days 4, 5 and (ahem!) 6 Samuel Jack details the completion of his multi-player game for WP7 utilizing Azure, in the hour-by-hour detail he's done the rest... plus a video of the final product! Who ate all the pies!! XAMLNinja has a very good discussion/link set of Charting posts all leading up to a portrait-only version of charting for WP7 with labels that looks looks great Phoney Windows Phone 7 Project Now Available! Shawn Wildermuth has a collection of classes he always uses with WP7 dev, and he's sharing them with all of us a "Phoney" Tools project on Codeplex... and now has a NuGet project also. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Ios Game with many animated Nodes,performance issues

  - by user31929

  I'm working in a large map upside-down game(not tiled map),the map i use is a city. I have to insert many node to create the "life of the city",something like people that cross the streets,cars,etc... Some of this characters are involved in physics and game logic but others are only graphic characters. For what i know the only way i can achive this result is to create each character node with or without physic body and animate each character with a texture atlas. In this way i think that i'll have many performance problems, (the characters will be something like 100/150) even if i'll apply all the performance tips that i know... My question is: with large numbers of characters there another programming pattern that i must follow ? What is the approch of game like simcity,simpsons tapped out for ios,etc... that have so many animation at the same time?

  Read the article

• Making organic 2D tilemaps for tile based games...

  - by Codejoy

  So I have always wondered how one makes a nice (not so squarish) 2d tile map, is it possible? all games now days I think use textured polygons...but my game engine (and engine) doesn't support that to my knowledge. But it does support nice TMX files generated by mapeditor.org's Tiled Map Editor. Though in my game I want nice twisting and turning caverns to traverse ... I was wondering some ideas on such a process... is it in the art style? The type of tile engine? both? So what are some common techniques?

  Read the article

• cross resolution level design advice [on hold]

  - by Mike

  I was looking for some beginner advice regarding level design across multiple resolutions. I believe the answer is likely "it depends", but any input from anyone with real experience is very appreciated. Basically, I am building a 2D Super Metroid type game. If rooms/levels are to be a tiled grid, what are some general best practices for designing rooms when taking into account different resolutions? Since more or less tiles could fit vertically on a single screen depending on the resolution, is it better to design towards possibly having more of the room visible depending on the screen (with a bare minimum needed for gameplay), or should I fix the design at a certain tile height and scale the graphics?

  Read the article

• Problems in exporting terrain from autodesk 3ds

  - by Jatin Kumar

  i am trying to make small counter strike sort of game and for the terrain part i have exported the terrain in 3ds format from Autodesk 3ds-max and imported the same in opengl using lib3ds. Its working fine but with few problems: The terrain is mainly made up of some cubical boxes with texture on them and placed on a big flat surface with boundary wall. In opengl i have enabled anti aliasing but still there is too much aliasing on the boundaries (visible when rotating the camera). I have tiled the floor with some image but in opengl it is just the single image stretched over the complete surface. I have exported animated model (Skelton+mesh+material+animation) from 3ds and used cal3d library for reading the same. Model has a gun also which is not appearing in opengl and it too has too much of aliasing problem. I have googled around but couldn't find any relevant solutions. Thanks in advance

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >