Search Results

Search found 5716 results on 229 pages for 'dual channel'.

Page 30/229 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Dual display setup - only one displayed after logon

  - by oneofthemany

  During boot process my desktop shows both Monitors, but after log I only get one. I'm using Ubuntu 11.10 When I go into Displays its still only shows on Monitor. Here is my graphics card details: 01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0405 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at de000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dfe00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia_96, nvidia_173, nouveau, nvidiafb

  Read the article

• Dual boot w/ windows 7

  - by Aduff

  So my PC had windows XP and Win 7 on it and I went into the XP partition and installed Ubuntu 12.10 over it being sure to use 90% of the XP partition for the / mount and 10% for the swap. It installed but when I boot the computer it doesn't give me the option of choosing between 7 or Ubuntu, just booting right to the Linux distro. Should I have installed it in 7 over the XP partition? I can see the drive in Ubuntu that contains all the 7 files. How can I recover my 7 access?

  Read the article

• Dual monitor with different resolutions problem

  - by Mackemint

  I'm on an LG R405 with a PM965 chipset and a NVIDIA GeForce Go 8400M GS gaphics card. I'm trying to use an external monitor (Benq senseye3 G2222HDL) through a VGA out port. All was fine when installing except for the screen layouts were flip-flopped (computer defalut setup so external monitor was to the right instead of left). When I moved the secondary monitor to its real position in the setup, I started getting strange problems. I loose representation of large portions of the screen, on both screens, and have to reboot. If I plug the monitor in after rebooting I get more problems than when booting up with the monitor already plugged in, but in both cases I can barely see what I'm doing. Please advice! Regards /M

  Read the article

• Cannot find GRUB - Ubuntu/Windows 8 dual-boot

  - by ubeatlenine

  Hello Ubuntu community, I find myself in an interesting situation. I have a Dell Inspiron 531 with Windows Vista. Recently my brother decided it would be a good idea to overwrite Vista with the Windows 8 consumer preview. Since we have had this PC for a very long time, we have long since lost the Vista CD, and according to the Windows 8 preview website you cannot recover your previous OS without it. I thought this would be a good opportunity to try out Ubuntu (since we obviously cannot keep the preview as an OS), but it appears that Ubuntu 11.10 Desktop is not compatible with Win8. Ubuntu doesn't run from the LiveUSB I made, instead it freezes on the loading screen and then disintegrates into black and white stripes. I blamed this failure on Ubuntu not being compatible with win8 yet and tried to install Ubuntu from the USB on a partition made from the remaining space on my hard drive - about 100GB. However the installer crashed while loading modules and told me I didn't have enough disk space. Since then, I have not been able to load either Ubuntu or Windows, BIOS is shifted over to the left of my screen, and I always get the same message: error: unknown filesystem grub rescue> typing "ls" at the prompt gives me the following: (hd0) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) does this mean I have multiple partitions running windows on my computer? Is it possible to recover Vista without the disk? Are all of my problems stemming from Ubuntu not being compatible with Win8 preview? (I realize the majority of my questions are about Windows, but seeing as the prompt I get is for grub I thought I would ask here first.) Any insight anyone has on this predicament would be greatly appreciated.

  Read the article

• Dual Booting WIndows 7 and Ubuntu 12.04

  - by mfes

  I have Windows 7 32 bit installed on a 64 bit Laptop. I am trying to install Ubuntu 12.04.I am trying to install Ubuntu 12.04 using USB. I created the bootable usb using live usb installer. I have 6 partitions in Windows 7 of which in Windows 7, I created a partition of 50 GB and also having an unallocated space of 50 Gb. I will install Ubuntu 12.04 in any one of these space. When I am booting from USB and selecting the option of "Try Ubuntu" and In Ubuntu desktop, when I click "Install Ubuntu 12.04" , and choosing the option as " Something Else " ( I dont want to Install Ubuntu alongside Windows or want to erase Windows totally ), only 3 paritions getting listed. One is system memory reserved as 100 mb. Second is C drive and third partition is listed as a whole space ie remaining space of the entire hard disk is listed instead of partitions. I tried Gparted Editor and it also lists the same as Ubuntu 12.04 So whats the problem and how can I make the Ubuntu to detect all the partitions so that I can install in the unallocated space or in the 50 GB Partition ? ( P.S - When I try the same in my 32 bit desktop, it is detecting all the partitions )

  Read the article

• Force Gnome 3 to work

  - by nkg5

  I have Ubuntu 12.10 on dual-boot with windows XP. My PC specifications are AMD Sempron 2800+ 1,6GHz with 512 MB ram and ATI Radeon 9250 graphic card with 128 MB memory. As Unity works slow and I don't like it's look, I installed gnome-shell. But as you know, Gnome 3 won't work on it. But gnome classic without effects works great. Thing is, when I turn off windows (by holding the power button or pressing restart button) my resolution on Linux is changed to 1024x768, and I can only change it by turning off the PC and turning off it's power source. But it is not the problem. The problem is that it runs Gnome 3 after one restart, it also runs better than Unity. My question is: Can I somehow force gnome 3 to work always and disable some of it's effects so it can run better?

  Read the article

• Can't Reboot into Windows 8.1 from Ubuntu

  - by Extended Range

  I am newb in Ubuntu. Currently I am using an Acer V11 laptop with a pre-intalled Windows 8.1. I follow some guideline (http://www.everydaylinuxuser.com/2014/05/install-ubuntu-1404-alongside-windows.html) which successfully install Ubuntu 14.04 LTS alongside Windows 8.1 with UEFI enabled all the way throughout the installation and my current usage and a GRUB. But I got into some problem. The dual boot mostly works fine as I am able to successfully boot into either one of the Windows 8.1 or Ubuntu when stating my laptop. However it ran into issue after I start the device and use Ubuntu for a while (2 hour for instance) and then restart it: If I press the restart from Ubuntu, the grub still shows and I am still able to choose the Windows Boot Manager. But the Windows loading process was stuck at the Acer Loading Screen and I am not able to see the standard circular Win8 loading progress bar. Does someone know why would this happens?

  Read the article

• Can I install 12.10 on Ainol Novo7 Venus?

  - by Jens Grünwald

  Is it possible to install Ubuntu on my Ainol Novo7 Venus? I don't want any tablet-version of ubuntu, because I like ubuntu how it is and think there is no need for a tablet-version (I know there is no tablet-version, but many questions after it). So I want to install full desktop-ubuntu 12.10 with unity and everything, but I want a dual-boot with my existing android installation. Is that possible? If so, how? Is 16gb enough for ubuntu or should I buy an extra sd-card for it?

  Read the article

• Want to back up using dd, but my present ubuntu installation is 149.04 + 3.81(swap) GB, my target drive is only 149.05 GB

  - by Shreshth

  My netbook is a Windows7-Ubuntu 12.04 dual boot. in gparted the strcture looks like Partition filesystem size /dev/sda2 extended 152.86GiB __/dev/sda6 ext4 149.04GiB __/dev/sda5 linux-swap 3.81GiB /dev/sda3 ntfs 100MiB /dev/sda4 ntfs 145.13GiB /dev/sdb1 fat32 149.05GiB I want to backup my ubuntu 12.04 installation that is sda2 (sda6 + sda5) to sdb1. As you can see sda5 +sda6 is 152.86 GB where are sdb1 is only 149.05 GB. Can I backup only sda6(149.04GB) without losing any data? That is to say, will I be able to restore my ubuntu using only sda6 and later add the needed swap? Edit: Made it readable.

  Read the article

• Ubuntu/Nvidia lists DVI dual cable as single

  - by Joseph Mastey

  I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

  Read the article

• Subscribe to YouTube channel in iTunes

  - by ejunker

  What is the best way to subscribe to a YouTube channel and have it show up in iTunes as a podcast? I want iTunes to automatically download the videos in MP4 format or download them in FLV and convert them to MP4 in iPod format. I have used these services in the past but they don't seem to be working anymore: RSSHandler Youtube Podcaster

  Read the article

• Does vsftpd support Clear Command Channel (CCC)?

  - by Matt Cummings

  Does the VSFTPD server support Clear Command Channel (CCC) per RFC 2228? If it does support CCC, does it need to be enabled? Or, is it enabled with the whole FTPS suite of configuration parameters?

  Read the article

• How to display a TV channel and computer monitor at the same time on LCD TV

  - by lisa

  Hello! I need a way to diplay a TV channel (or DVD) and the PC monitor at the same time on a LCD TV. Can you suggest a way to do it? Thank you

  Read the article

• windows live playback left and right audio channel

  - by user1254761

  I have a multichannel (4x stereo) audiocard (m-audio delta1010lt) and want to playback /playthru some of the channels live. But I am only able to playback/playthru the left channel on each stereo-input (CH1, CH3, CH5, CH7). For CH2,CH4,CH6,CH8 I see the Windows Volume-Indicator going up and down in the Windows Record-Audiosettings but I don't hear any playback sound. Is there a way to playback/playthru all input channels?

  Read the article

• Cisco FC SAN switch decision

  - by Chopper3

  I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

  Read the article

• Examples of useful or non-trival dual interfaces

  - by Scott Weinstein

  Recently Erik Meijer and others have show how IObservable/IObserver is the dual of IEnumerable/IEnumerator. The fact that they are dual means that any operation on one interface is valid on the other, thus providing a theoretical foundation for the Reactive Extentions for .Net Do other dual interfaces exist? I'm interested in any example, not just .Net based.

  Read the article

• Which protocol do clients use when communicating with servers in a SAN

  - by Mario De Schaepmeester

  I'm trying to wrap my head around how a SAN works and how it is implemented. If I understand this well, clients wanting to access the storage devices in a SAN need to communicate with the servers via the LAN. When the SAN is implemented with Fibre Channel, these servers are Fibre Channel compliant devices, and internally in the SAN they work with the Fibre Channel Protocol. Both data and communications are supported by Fibre Channel. But which application-layer protocol do the clients use in the LAN to communicate with the servers? Is the data simply transferred via ethernet as well? This is some part I am stuck on. I went trough a lot of sources but most sources don't really mention protocols and if they do, they only mention FCP.

  Read the article

• Determine if Alpha Channel is Used in an Image

  - by Otaku

  As I'm bringing in images into my program, I want to determine if: they have an alpha-channel if that alpha-channel is used #1 is simple enough with using Image.IsAlphaPixelFormat. For #2 though, other than looping through every single pixel, is there a simple way I can determine if at least one of the pixels has an alpha channel that is used (i.e. set to some other value than 255)? All I need back is a boolean and then I'll make determination as to whether to save it out to 32-bit or 24-bit.

  Read the article

• How can I dual boot my iphone or ipad to run a very simple custom os?

  - by Jim98

  I am an experienced C/C++ programmer and have worked with assembly and many other programing language and I want to start a project as a learning process. I want to try and run a simple custom os on the iphone or ipad. What knowledge would I need to do this, and how does the iphone or ipad bootloader load the os and how could I modify it to load a custom os? Im not really sure what to ask here so I really just need to get as much information as possible so I could ask some more informed questions to get my project started Thanks

  Read the article

• Create Windows Bootloader/Boot into Windows from Ubuntu

  - by Kincaid

  I have computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I have decided I wanted to remove Ubuntu, as I hardly used it. As a stupid mistake, I deleted the Ubuntu partition before changing the bootloader to replace Grub. Whenever I know boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader solutions. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Is there any options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? In the end, I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine -- I can use EasyBCD from there. Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows. Any help would be greatly appreciated.

  Read the article

• rsync'd a folder, folder doesn't show up, but free disk space decreased

  - by Patrick

  I am currently trying to switch from mac to windows/ubuntu dual boot (on 2 seperate internal HDDs), but ran into some trouble restoring my documents. I am not sure all the information below is necessary, but if I knew how to solve it, I wouldn't ask it here. I backed up my mac before buying this laptop on an external HDD with Carbon Copy Cloner. I wanted to put these files on my user folder on my windows HDD, but I could not do that from inside windows (HFS+ format of mac), so I used rsync from inside Ubuntu to copy the documents from the ext hdd to the windows partition. It seemed like it went okay, but from inside windows (and later also Ubuntu) the folder didn't show up. My free HDD space, however, has reduced with about 200 GB (the size of the backup) when looking at the disk properties (from inside Windows and Ubuntu). rsync command I used: rsync -av /media/patrick/Toshiba\ 1.5T/Users/patrickvandenberg/ /media/patrick/Windows8_OS/Users/Patrick/MacBackup/ Folder does not exist: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ cd /media/patrick/Windows8_OS/Users/Patrick/MacBackup bash: cd: /media/patrick/Windows8_OS/Users/Patrick/MacBackup: No such file or directory Size of disk: patrick@patrick-Lenovo-IdeaPad-Y410P:~$ du -hs /media/patrick/Windows8_OS/ 195G /media/patrick/Windows8_OS/ Size of disk according to Disk properties: http://i.stack.imgur.com/OteMX.png (not enough rep to insert the image)

  Read the article

• How to diagnose and fix Kernel Panic Fatal Machine Check error?

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. A fine machine comparable to a Macbook Pro. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following Machine Check Exception error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-( I also disabled the Execute Disable Bit (EDB) flag in the BIOS. EDB is an Intel hardware-based security feature that can help reduce system exposure to viruses and malicious code. Since I disabled it, the error did occur less frequently, but it still appears occasionally :-( It seems to be the same error as described here and here. Maybe a Samsung specific Kernel problem? A similar error also happens on a Samsung Ultrabook Series 9 (which seems to be kernel bugs 49161 and 47121). At my Samsung Series 7, it still occurs for instance during booting on battery after "Checking battery state". Perhaps anyone else has an idea? These Kernel Panic errors are reallly annoying..

  Read the article

• Cannot choose windows installation [closed]

  - by Toby

  Possible Duplicate: Ubuntu 12.4 and XP on Seperate Drives, Dual Boot, How? I've never used Linux before in any form, but was always intrigued, so after a while of deciding whether to risk it I installed Ubuntu 12.04 During the installation I was asked "what would you like to do?" Install Ubuntu as the only operating system, alongside another os, or something else. I chose something else as I wanted to format one of my old 100Gb IDE drives to serve as the partition to install ubuntu on. I formatted this drive with ext4 and made it the root directory for the installation, all ok. I also have on a 1Tb SATA drive two partitions (splitting the disk in 2) one of these contains windows 7 and I did nothing to this drive (and was careful to do so) After the installation finished the computer restarted and gave me no option for choosing operating systems? what have I done wrong how can this be fixed? I would still like to be able to use Win7 for gaming. Any help on this matter would be greatly appreciated. :)

  Read the article

• Ubuntu installation does not recognize drive partitioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Dualboot 12.04/windows 7 After installation from USB reboot straight to Windows with no option to select ubuntu and no boot loader

  - by Alkatraz

  windows 7 home premium intel i5 2500k CPU ASUSP8Z68-V PRO Motherboard GeForce GTX 570 GPU corsair 120Gb SSD (windows 7 os) WD 1tb HDD I select the USB drive in the BIOS and boot to it and choose install. i select to manually configure partitions, partition the 200gb of unallocated space on my 1Tb HDD into 16Gb swap file 30Gb / extf4 and 154Gb /home extf4. I make sure that the boot loader is installed to corsair 120Gb SSD (where the windows boot is) and installation goes smoothly. When i reboot after install it runs through bios strait into windows. I have tried upwards of a dozen times and i have also tried with linuxmint. I have also redownloaded the ISO and used two different programs to create the live usb. the installation seems to go well as i can see the partitions i have created in the windows device manager after install http://imgur.com/Wp0V1 I currently run lubuntu on my laptop but it is not a dual boot. i'm assuming this is a boot loader issue and i am assuming that inside those partitioned files in my screenshot there is a working OS of ubuntu 12.04 i just have no way of getting to it.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >