Search Results

Search found 1157 results on 47 pages for 'latency'.

Page 30/47 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • Microsoft Researchers shows off best Touch Screen ever made. Better than Apple touch screens!

    - by Gopinath
    All the touch devices we have in market today like iPads, iPhones, Samsung tablets and phones, etc.  have a very small issue – 100 milliseconds of lag. The lag is the amount of time a touch device takes to respond after you touch the device. The 100 milliseconds of lag may not be an issue when you are tapping and swapping the interface elements on a device, but they are apparent when you wing your finger around the screen faster. For example if you use any painting app, the lag is very obvious and screen responds slowly than an artist can paint with his finger. Researchers at Microsoft labs came out with a prototype of touch device that drastically cuts down the 100 milliseconds of lag time to just 1 millisecond. That’s 100 times faster than today’s touch screen devices. Check out the video embedded below for a demo of new touch screen. Over at TechCrunch, Chris Velazco says: The difference is staggering, especially when Dietz trots out the slow-motion footage. With the delay between touch input and screen response slashed by orders of magnitude, a device that sports the sort of super-low-latency Dietz envisions has the potential to feel far more (for lack of a better term) natural than its brethren. There’s zero delay when you slide a checker across a board, for example, and bringing that sort of instantaneous feedback to the many screens in our lives could help to bridge the gap between operating a bit of software and the feeling of interacting with objects.   It will be great boost to Microsoft’s tablet strategy if they succeed in bringing this research into mass market and allow it’s partners to use the technology on Windows 8 tablets.

    Read the article

  • Ralink RT3060 wireless device configuration on ubuntu 12.04

    - by Stephan
    concerning How do I get a Ralink RT3060 wireless card working? I'm running Ubuntu 12.04 with a 'LWPX07 Edimax EW-7711In 150M 1T1R WL PCI Card' which has a rt3060 chip. Out of the box the card is recognized as rt2800sta. I tried solution one, that didn't work. Still the card connects to the wireless network, but it seems to slow to load any pages. Then I tried solution 2, but then the network-manager doesn't see any wireless device. $ iwconfig lo no wireless extensions. ra0 Ralink STA Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. $ lsmod Module Size Used by rt3562sta 882296 0 $ lspci -v 05:02.0 Network controller: Ralink corp. RT3060 Wireless 802.11n 1T/1R Subsystem: Edimax Computer Co. Device 7711 Flags: bus master, slow devsel, latency 64, IRQ 23 Memory at ff9f0000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2860 Kernel modules: rt3562sta, rt2800pci Am I missing a configuration step? How do I tell the network card which driver to use? Thanks in advance Stephan I found the problem. As described in stevens blog http://steveswinsburg.wordpress.com/2011/03/12/how-to-install-a-d-link-dwa-525-wireless-network-card-in-ubuntu-10-04/ sudo su make && make install "You need to use ‘sudo su’ and not just ‘sudo’ so it creates the directories properly." That is the problem with the solution describe above.

    Read the article

  • How to implement lockstep model for RTS game?

    - by user11177
    In my effort to learn programming I'm trying to make a small RTS style game. I've googled and read a lot of articles and gamedev q&a's on the topic of lockstep synchronization in multiplayer RTS games, but am still having trouble wrapping my head around how to implement it in my own game. I currently have a simple server/client system. For example if player1 selects a unit and gives the command to move it, the client sends the command [move, unit, coordinates] to the server, the server runs the pathfinding function and sends [move, unit, path] to all clients which then moves the unit and run animations. So far so good, but not synchronized for clients with latency or lower/higher FPS. How can I turn this into a true lockstep system? Is the right methodology supposed to be something like the following, using the example from above: Turn 1 start gather command inputs from player1 send to the server turn number and commands end turn, increment turn number The server receives the commands, runs pathfinding and sends the paths to all clients. Next turn receive paths from server, as well as confirmation that all clients completed previous turn, otherwise pause and wait for that confirmation move units gather new inputs end turn Is that the gist of it? Should perhaps pathfinding and other game logic be done client side instead of on the server, if so why? Is there anything else I'm missing? I hope someone can break down the concept, so I understand it better.

    Read the article

  • Do any CDN services offer multiple urls (or aliases) for your files?

    - by Jakobud
    Lets say a company has multiple commercial web properties that happen to use a lot of the same images on each site. For SEO reasons, the sites must not appear to be related to eachother in any way. This means that the sites can't all link to the same image, even though they all use the same one. Therefore, an image is uploaded to each site and served from each site separately. In order to improve maintainability and latency, lets say the company wanted to use a CDN service. What I'm wondering is, if you upload a file, like an image or something, to a CDN, is there basically one single URL that you access that image at? Or do some (or all) CDN services offer alias URLs so that you can access the same resource from multiple URLs? Example of undesirable situation: Both sites link to the same file URL Site ABC links to <img src="http://123.cdnservice.com/some-path/myimage.jpg"/> Site XYZ links to <img src="http://123.cdnservice.com/some-path/myimage.jpg"/> Example of DESIRABLE situation: Both sites link to the same file via different URLs Site ABC links to <img src="http://123.cdnservice.com/some-path/myimage.jpg"/> Site XYZ links to <img src="http://123.cdnservice.com/some-alias-path/myimage.jpg"/> So in the end, there is only one single file, myimage.jpg on the CDN server, but it is accessible from multiple URLs. Is this possible with CDN services? I know this would make browsers cache the same image twice, but at least it would be better for maintainability. Only one file would ever have to be uploaded.

    Read the article

  • Can web apps allow fast data-typists to "type-ahead"?

    - by user61852
    In some data entry contexts, I've seen data typists, type really fast and know so well the app they use, and have a mechanic quality in their work so that they can "type ahead", ie continue typing and "tab-bing" and "enter-ing" faster than the display updates, so that in many occasions they are typing in the data for the next form before it draws itself. Then when this next entry form appears, their keystrokes fill the text boxes and they continue typing, selecting etc. In contexts like this, this speed is desirable, since this persons are really productive. I think this "type ahead of time" is only possible in desktop apps, but I may be wrong. My question is whether this way of handling the keyboard buffer (which in desktop apps require no extra programming) is achievable in web apps, or is this impossible because of the way web apps work, handle sessions, etc (network latency and the overhead of generating new web pages ) ? Edit: By "type ahead" I mean "keyboard type ahead" (typing faster than the next entry form can load), not suggets-as-you-type-like-google type ahead. Typeahead is a feature of computers and software (and some typewriters) that enables users to continue typing regardless of program or computer operation—the user may type in whatever speed he or she desires, and if the receiving software is busy at the time it will be called to handle this later. Often this means that keystrokes entered will not be displayed on the screen immediately. This programming technique for handling user what is known as a keyboard buffer.

    Read the article

  • How do I get network working on a Dell n5010 - Ubuntu 10.04

    - by cyberroger
    Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

    Read the article

  • Opportunities in Development in our Swedish office

    - by anca.rosu
    Hi everyone, my name is Henrik and I joined the JRockit group in 2004. Before that my background was Microsoft, as both a Test Competence lead and as a Program Manager. As an Engineering Manager at Oracle I lead a team of 11 developers. I focus on people management and the daily operations of the department with a heavy focus on interaction and dependencies between the groups and departments here at the Stockholm development site. I also make sure my team deliver on our commitments. I would like to give you a brief summary of the Oracle JRockit team: -The development group in Stockholm delivers several products for the Oracle Fusion Middleware stack. Our main products are JRockitVE which allows you to run a Java Virtual Machine without an operating system, the JRockit Java Virtual Machine which is the default jvm for all Oracle middleware products, and the JRockit MissionControl, a set of tools that allows developers to monitor their applications at runtime and perform advanced latency analysis as well as in-production memory leak detection etc. -The office has several departments focusing on different aspects of the product development process, not only to build features and test them but everything from building the infrastructure needed to automatically build and test the products to sustaining engineering that tracks down bugs in customer systems and provide them with patches. Some inspirational lines around what the Oracle JRockit group can offer you in terms of progress, development and learning: - It is a unique chance to get insight and experience building enterprise class software for one of the worlds largest software companies. Here there are almost unlimited possibilities for the right candidate to learn about silicon features and how to implement support for this in software, and to compile optimizations. The position will also give insight into the processes needed to produce software at this level in the industry. If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com. Technorati Tags: Development,Sweden,Jrockit,Java,Virtual Machine,Oracle Fusion Middleware,software

    Read the article

  • Rosegarden plugin list is empty

    - by Wes
    I've just installed rosegarden through apt. I've also installed jack and a low latency kernel through a PPA https://launchpad.net/~abogani/+archive/ppa. I've started jack-server and through the control panel I can see its wiring things through rosegarden. I've also tried installing qsynth and dssi both through apt. However I can't see any plug ins in the synth plug-in list. Therefore I'm unable to test if this works. I've tried launching qsynth before rosegarden and I've tried a few things however I just can't see any plugins. Does anyone know how to get this to work? I'm using ubuntu 11.04 or 11.10 I think. sudo apt-get install rosegarden -o APT::Install-Suggests=true synaptic sudo apt-get install synaptic synaptic sudo synaptic synaptic sudo apt-add-repository ppa:abogani/ppa sudo apt-get install linux-lowlatency sudo apt-get install dssi sudo apt-get install alsa-firmware-loaders alsa-tools alsa-tools-gui alsa-firmware sudo apt-get install alsa-firmware-loaders alsa-tools alsa-tools-gui sudo apt-get install blop caps cmt fil-plugins rev-plugins swh-plugins tap-plugins sudo apt-get install blepvco mcp-plugins omins

    Read the article

  • Does DirectX implement Triple Buffering?

    - by Asik
    As AnandTech put it best in this 2009 article: In render ahead, frames cannot be dropped. This means that when the queue is full, what is displayed can have a lot more lag. Microsoft doesn't implement triple buffering in DirectX, they implement render ahead (from 0 to 8 frames with 3 being the default). The major difference in the technique we've described here is the ability to drop frames when they are outdated. Render ahead forces older frames to be displayed. Queues can help smoothness and stuttering as a few really quick frames followed by a slow frame end up being evened out and spread over more frames. But the price you pay is in lag (the more frames in the queue, the longer it takes to empty the queue and the older the frames are that are displayed). As I understand it, DirectX "Swap Chain" is merely a render ahead queue, i.e. buffers cannot be dropped; the longer the chain, the greater the input latency. At the same time, I find it hard to believe that the most widely used graphics API would not implement such fundamental functionality correctly. Is there a way to get proper triple buffered vertical synchronisation in DirectX?

    Read the article

  • double screen in ubuntu 12.04?

    - by johan
    I am using ubuntu 12.04 and my video card is ATI Radeon 5000. I cannot use double screen (extended version). I get this error The selected configuration for displays could not be applied requested position/size for CRTC 148 is outside the allowed limit: position=(1280, 0), size=(1280, 768), maximum=(1440, 1440) I tried all display settings but it does not work. Some outputs from the system settings: root@ubuntu:~# lshw -C display *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff root@ubuntu:~# aticonfig --initial Uninitialised file found, configuring. Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.original-0 root@ubuntu:~# cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I would appreciate any suggestions how to solve the problem. Thank you

    Read the article

  • Google Chrome not rendering webpages correctly

    - by sumit_gt
    I am facing some serious web page rendering issues with Chrome. It is more prominent during javascript based animations and stuff on websites like youtube. I have tried removing chrome using (sudo apt-get purge google-chrome-stable) and then reinstalling it. But the problems still persist. The same webpages work correctly on firefox on ubuntu and chrome on windows. The problem only shows up when I use chrome on ubuntu. I think the issue has started after I updated to the latest version of Chrome. I have used Chrome previously on this machine without any problems. I have attached a image that demonstrates the issue. What could possibly be the problem? PS: here's the output of lshw -c video: *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff Here's the output of lspci -nn: output of lspci -nn

    Read the article

  • Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

    - by Justin Kelly
    I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

  • What are the possible options for AI path-finding etc when the world is "partitionned"?

    - by Sebastien Diot
    If you anticipate a large persistent game world, and you don't want to end up with some game server crashing due to overload, then you have to design from the ground up a game world that is partitioned in chunks. This is in particular true if you want to run your game servers in the cloud, where each individual VM is relatively week, and memory and CPU are at a premium. I think the biggest challenge here is that the player receives all the parts around the location of the avatar, but mobs/monsters are normally located in the server itself, and can only directly access the data about the part of the world that the server own. So how can we make the AI behave realistically in that context? It can send queries to the other servers that own the neighboring parts, but that sounds rather network intensive and latency prone. It would probably be more performant for each mob AI to be spread over the neighboring parts, and proactively send the relevant info to the part that contains the actual mob atm. That would also reduce the stress in a mob crossing a border between two parts, and therefore "switching server". Have you heard of any AI design that solves those issues? Some kind of distributed AI brain? Maybe some kind of "agent" community working together through message passing?

    Read the article

  • Screen problems on 11.10 using VGA compatible controller 2nd Generation Core Processor Family Integrated Graphics Controller

    - by MorrisseyJ
    I am having problems with my display. The problem manifests as lots of screen artefacts, which seem to be worse in Unity than in Gnome 3, are worse after i have used suspend and are intolerable if i set myself up on a dual monitor. Specific issues include: icons disappearing, lines occurring all over the screen, the backgrounds of certain windows going another colour and window borders disappearing or being filled with text from other parts of the screen. The most annoying problem is lines of text disappearing from a host of word processing programmes (libreoffice, gedit, bluefish etc), as i type. In most circumstances the screen problem can be temporarily fixed (so that i can see the screen clearly) by either scrolling the text off the screen and then scrolling it back onto the screen, or highlighting the offending area of the desktop, by clicking and dragging. Errors on parts of the screen that don't seem to redraw (window borders (off the universal menu) or the screen area outside of a LO document, in print layout view, for example) can't seem to be fixed in a session. I am running 11.10, 64 bit on my Thinkpad x121e Display information is: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:4000(size=64) There appear to be a few problems with the Intel graphics and Ubuntu but i am not sure if they are all the same. If anyone knows if this is a known bug it'd be great to know, otherwise i'll file a report. Should anyone know of a fix i would greatly appreciate hearing about it. Let me know if you need any more information. Thanks

    Read the article

  • How to fix a Broadcom 43224 (rev. 01) in ubuntu 12.10, running on a macbook pro 6,2?

    - by Eduardo Bezerra
    I've googled for 3 days so far, with no success, so I'll be straightforward: How do you get it to work? this is the output for lspci -v: 03:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Subsystem: Apple Inc. Device 0093 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at c1b00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: bcma-pci-bridge Kernel modules: bcma for uname -a: Linux fury 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I've tried with bcmwl-kernel-source, firmware-b43-installer and now I'm out of ideas. Can someone help me? This is driving me insane! EDIT: for lspci -nn | grep 0280: 03:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) I can see the networks available, but when I try to connect, it gets stuck in a loop: tries to connect, fails, tries again, fails again and so on... EDIT 2: After a long break from this problem, I've just run a few tests again and found out that, although my macbuntu still fails to connect to my home wi-fi network, it works just fine at my university... Does that help in anyway? My home network is managed by a dual-band (2.4Ghz and 5Ghz) 802.11n cisco e4200 wi-fi router.

    Read the article

  • Screen flickering when using midrange brightness values on Dell XPS

    - by Eliran Malka
    After a fresh Ubuntu install on my laptop, I discovered the function keys for screen brightness control (Fn+F4 and Fn+F5) are not working. Digging around here, I managed to get it to work by following the solution suggested on this post and that one, but alas — after applying it, a strange problem occurred: Setting the brightness level to any value other than minimum or maximum, the screen starts flickering back and forth from the selected level to full brightness, apparently due to Dell's power saver attempting to dim the screen to adjust the brightness levels. I looked up for a solution here on the site, and possibly everywhere, with no avail. Also tried: To manually control the brightness by configuring the ACPI level (setting values by echo [some_value] | sudo tee /sys/class/backlight/[vendor]_backlight/[some_key], without success. Installing the Intel graphics driver, thinking it's missing. Realized it's installed out of the box by installing Mesa Utils. How to resolve this? Environment Model: Dell Studio XPS 13 OS: Windows 7 64bit / Ubuntu 12.04 32bit (dual boot) Graphics Driver: Intel HD 3000 (Sandybridge Mobile x86/MMX/SSE2) lshw -C display output: *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:f0000000-f03fffff memory:e0000000-efffffff ioport:2000(size=64)

    Read the article

  • Lightning fast forum based around metadata / tags? [closed]

    - by Dan W
    Possible Duplicate: What Forum Software should I use? I wonder if anything like this exists. I'd like to add a forum to my site, but instead of the usual forum/subforum/sub-subforum structure, I'd like to use a metadata/tag approach where everything exists as a single directory, and where there's a search field at the top which instantly (<0.5 sec) filters the threads to a particular keyword or keywords. Also, as the admin, I would be able to add highly visible buttons at the top, which can be clicked on for the main categories I choose for the forum (nevertheless, users can also add tags to their own threads outside of these default main tags I supply if they wish). This approach, if done properly, is more powerful, efficient, maintenance free, scalable and friendly than a standard forum, so I was hoping someone had the same idea and made something out of it. It couldn't be that hard. I'd want the speed to be up to (or near) the standard of this: http://forum.dlang.org/ Other forums (e.g.: phpBB) are orders of magnitude worse than that in terms of latency (posting or browsing), and I think that is wrong, even in principle ;)

    Read the article

  • Internal Mic not working on Dell Adamo 13

    - by AFD
    So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

    Read the article

  • What is recommended minimum object size for gzip benefits?

    - by utt73
    I'm working on improving page speed display times, and one of the methods is to gzip content from the webserver. Google recommends: Note that gzipping is only beneficial for larger resources. Due to the overhead and latency of compression and decompression, you should only gzip files above a certain size threshold; we recommend a minimum range between 150 and 1000 bytes. Gzipping files below 150 bytes can actually make them larger. We serve our content through Akamai, using their network for a proxy and CDN. What they've told me: Following up on your question regarding what is the minimum size Akamai will compress the requested object when sending it to the end user: The minimum size is 860 bytes. My reply: What is the reason(s) for why Akamai's minimum size is 860 bytes? And why, for example, is this not the case for files Akamai serves for facebook? (see below) Google recommends to gzip more agressively. And that seems appropriate on our site where the most frequent hits, by far, are AJAX calls that are <860 bytes. Akamai's response: The reasons 860 bytes is the minimum size for compression is twofold: (1) The overhead of compressing an object under 860 bytes outweighs performance gain. (2) Objects under 860 bytes can be transmitted via a single packet anyway, so there isn't a compelling reason to compress them. So I'm here for some fact checking. Is the 860 byte limit due to packet size the end of this reasoning? Why would high traffic sites push this lower/closer to the 150 byte limit... just to save on bandwidth costs, or is there a performance gain in doing so?

    Read the article

  • 12.04 wired network doesn't work RTL8111/8168B

    - by laket
    its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

    Read the article

  • What are the advantages of programming to under an OS as opposed to bare metal executive?

    - by gby
    Assume you are presented with an embedded system application to program, in C, on a multi-core environment (think a Cavium or Tilera) and need to choose between two environments: Code the application under Linux in SMP mode or code the application under a thin bare metal executive (something like a very minimal RTOS), perhaps with a single core running UP Linux that can serve control tasks. For the purpose of this question, assume that both environment provide the same level of performance guarantees in any measurable aspects of run time performance, including number of meaningful action per second, jitter, latency, real time considerations - the works. (and yes, I realize this is by far not a trivial assumption at all, bare with me). How would you justify going with a Linux SMP based solution rather then a bare metal thin executive solution? The question may seems silly. It certainly seems obvious to me - but I have to convince someone that does not think the same. Could you help make a list of arguments in favor of choosing a real SMP aware OS (Linux) vs. a bare metal executive assuming performance guarantees are NOT an issue? Many thanks

    Read the article

  • Can't connect to hidden network with BCM4313

    - by poomerang
    The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

    Read the article

  • Yoga Pro 2 Wi-Fi not working

    - by user293004
    I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

    Read the article

  • cpufreq-selector, cpufreq-info reporting wrong max speed

    - by dty
    Hi, I've just built a new machine with a Core i5-760 CPU. Max speed is 2.80GHz (turbo mode notwithstanding). I've also done a vanilla install of Ubuntu 10.10. I've added the cpufreq-selector applet to the top panel, and its menus only allow me to select up to 2.39GHz. If I select the "performance" governor, it also shows 2.39GHz. cpufreq-info reports: $ cpufreq-info cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to [email protected], please. analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.20 GHz - 2.39 GHz available frequency steps: 2.39 GHz, 2.26 GHz, 2.13 GHz, 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz, 1.46 GHz, 1.33 GHz, 1.20 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.20 GHz and 2.39 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 1.20 GHz. cpufreq stats: 2.39 GHz:13.74%, 2.26 GHz:0.09%, 2.13 GHz:0.08%, 2.00 GHz:0.08%, 1.86 GHz:0.07%, 1.73 GHz:0.07%, 1.60 GHz:0.08%, 1.46 GHz:0.08%, 1.33 GHz:0.11%, 1.20 GHz:85.61% (15560) [...CPUs 1-3 elided, but similar...] Any idea how to get Ubuntu and the various tools to recognise this as a 2.80GHz processor? And ideally to report the actual speed when running in turbo mode too, but that's not critical. Edit: I should probably add that the BIOS (& Windows) are quite happy that it's a 2.80GHz CPU. Thanks.

    Read the article

  • wine 1.4 regedit makes screen flicker on 12.04 with dual monitor setup

    - by s1lv3r
    I have a dualmonitor setup running dual 23" on 1920x1080 which has the following problem: When running any wine application (for example "wine regedit" from console) the screen flickers and the windows have artifacts like this: Also sometimes taking a screenshot using the print key will make compiz crash (starter and all window bars/menus are gone) when an wine application is started. I don't have the same problems on my notebook which has the same setup. Only difference is the notebook has ATI Graphics and this PC has nvidia. This is the output of lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G72 [GeForce 7300 LE] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:07:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nvidia latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:fb000000-fbffffff memory:fce00000-fce1ffff I also noticed that running xrandr from console makes the screen flicker for some seconds on this PC, which also doesn't happen on my notebook. Removing one screen from the setup will stop the flickering and the artifacts inside the wine applications from appearing. Does anybody have an advice what I could try to change to make this work?

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >