Search Results

Search found 1150 results on 46 pages for 'partitioning'.

Page 30/46 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Understanding Netbook Partitions & UNR Installation

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm just looking at the Disk Management right now (in Windows XP) and I'm trying to understand what partition holds what. There is "Local Disk (C:)" which is 40GB, "RECOVERY" (no drive letter) which is 6GB and then "TEMP_PART01 (D:)" which is 103.05GB. XP is installed on Local Disk (C:) and I've only used this hard drive for all my files, etc. Recovery is recovery... probably not removable anyways. Now, what bugs me is the TEMP_PART01 (D:) partition, which contains quite a bit of random junk, such as EULA text documents, an "external installer", UI Wrapper Resource DLLs, a "VC_RED" Windows Installer Package and a few more files. I have no clue what any of it means, but I'm assuming that this was probably stuff that could have been on the Local Disk (C:), along with the WINDOWS, Program Files, and Docs and Settings folder. So, how should I go about this? Should I have kept all my data on D: and left all OS related files/folders on C:? Now, I want to install Ubuntu Netbook Remix. Question is, will this install within Windows, if I want to dual boot it? If not, would I partition D: into two small chunks, one on which I would install UNR? There are basically two questions in here, but it'd be great to get answers for both! Thanks in advance.

  Read the article

• How can I shrink my Windows partition further than the disk management is allowing?

  - by Walkerneo

  I just bought a new computer with a 2tb hard drive that has only a single partition. I would like to divide this into at least 4 partitions, but when I try to shrink the current partition, it says the total size is 1888171 MB and that the size of available shrink space is only 939075 MB. The used disk space is at 40gb right now - why can't shrink it to somewhere around that? I read here: http://www.howtogeek.com/howto/windows-vista/working-around-windows-vistas-shrink-volume-inadequacy-problems/ that this is because of unmovable system files. I doubt this is the only problem though. I would like to get this partition down to 500gb. How can I do this?

  Read the article

• Can't create system image. 0x80780119 error after upgrade from 8 to 8.1

  - by cichy202

  I have upgraded my Windows 8 PC to 8.1 yesterday and it seemed like everything is working fine until I tried to create System Image. I got an error 0x80780119 saying that there is to little space on one of the partitions. I started looking into this problem and indeed one of the partitions does not meet the requirements. There are following partitions on my drive: DISKPART> list partition Partition ### Type Size Offset ------------- ---------------- ------- ------- Partition 1 Recovery 300 MB 1024 KB Partition 2 System 100 MB 301 MB Partition 3 Reserved 128 MB 401 MB Partition 4 Primary 74 GB 529 MB Partition 5 Primary 390 GB 75 GB Partition 1 has only 13MB free space. Partition 2 has 70MB free space, partition 3 is MSFTRES, partition 4 is my C drive with around 35GB free and partition 5 is not included in system image. Partitions were create like this during installation of Windows 8 - clean install from scratch. I am using UEFI so the drive is GPT formatted. So I thought, OK I can resize my C drive a little, move the partitions and expand the 1st one. I tried using GParted but it is not able to move the MSFTRES partition. It does not recognize the file system on it. So the question is: Is it possible to "clean up" the 1st partition in anyway? If not, is there anything special about MSFTRES partition? Or can I just remove it and create it a little further and just flag it as msftres with GParted?

  Read the article

• Installing/dual-booting Fedora 17 on existing Windows 7 HDD

  - by Moose4

  I have a 64-bit Windows 7 install as the only partition on a 1 TB HDD, with about 350 GB free. I would like to install Fedora 17 as a dual-boot option on this system and give it about 100 GB to play with. If in the Fedora install utility I choose to shrink the W7 partition by 100 GB to give it space, will that cause me to lose my existing W7 data? And how do I go about setting up dual-boot (with Windows 7 as the default)?

  Read the article

• merging two partitions on ubuntu

  - by gthm geeky

  This is how my partitions look like in Ubuntu. I would like to merge two partitions /dev/sda8 and /dev/sda/7 because I am unable to use both of them. /dev/sda8 111G 2.7G 103G 3% / udev 1.9G 12K 1.9G 1% /dev tmpfs 763M 864K 762M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.9G 252K 1.9G 1% /run/shm none 100M 72K 100M 1% /run/user /dev/sda7 117G 52M 111G 1% /home Please let me know if there is any way to do it. And all the partitions looks ugly..I would like to have only one partition which would be my home folder.

  Read the article

• Virtualbox: Raw linux partition not booting

  - by abalter

  I have a dual-boot laptop with Windows 7 and Ubuntu 12.04. I am trying to boot the ubuntu partition from windows using Virtualbox. I have successfully created the .vmdk, and created the virtual machine. However, I can't get it to boot (in Virtualbox). All I get is a black screen with the cursor in the top left. I wonder if I'm specifying the partitions correctly. My Ubuntu install has 3 partitions: \, \boot, \home. No swap partition. These are all in Disk 0, partitions 3,4,5 respectively. The command I used to create the .vmdk is: VBoxManage internalcommands createrawvmdk -filename C:\Users\abalter\.virtualbox\ubuntu.vmdk -rawdisk \\.\PhysicalDrive0 -partitions 3,4,5 Then I create a virtual machine based on that .vmdk. Why won't it boot?

  Read the article

• Grub Installation Failed: Fatal Error ... now what I do?

  - by eklavya

  I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

  Read the article

• Best way to partition 1 TB (Linux and Windows 7)

  - by Simon

  Is there an intelligent way to partition 1 TB and be prepared for resizing/adding/deleting partitions? I was thinking about LVM, but as far as I remember, Windows 7 can't be installed on logical volume right? For now my plan is: - ~150 GB for Windows 7 and other stuff (Visual Studio..., maybe I'll split it 100/50 or something like that) - simple NTFS - 850 GB = LVM - disk for Linux (Ubuntu) and other stuff virtual machines, etc. I'm mostly interested in how and what tools should I use to get easy in maintain partitions for both systems.

  Read the article

• Will you install software on the same partition as Windows system?

  - by Tim

  I was wondering if you always install software on the same partition as Windows 7 system? What kinds of software do you install on the same partition as Windows system? What kinds of software you install on another partition? If you install software on another partition, do you install them on a dedicated partition to these software? Or do you install them on the same partition as data (personal data)? How do you plan the sizes for the partition(s) in either case? What are to consider when making plans about the above questions? The software I am installing include: Matlab, Mathematica, IDEs, compilers or Interpreters for C++, C, Java, R, Python, Perl, Lisp, Latex, and database. Mainly for programming and typesetting kinds of studies and projects.

  Read the article

• windows 7 partition disappeared

  - by atoMerz

  I have a VPCF2 with windows 7 installed on it. I was working on my computer when on of my drives (D) disappeared. I can see it in Computer Management>Disk Management and it'd marked as Healthy(Primary Partition). When I right click on it the only options that are enabled are Delete Volume and Help. So I cannot assign a drive letter to it (not even in safe mode). I tried System Restore and it failed. I tried to boot the system using ubuntu tha was installed on my system but that fails too because it was installed on partition D. I'm hopeless. What can I do?

  Read the article

• Can I enlarge OS C: drive of my Windows 8 PC?

  - by Sorgatz

  Last year I got a new Western Digital WD Blue 500GB HDD to replace my old drive. The first thing I did was to install latest Windows 8. While installing Windows 8 I created 3 partitions, C drive for the OS and others for storage. The OS partition is 120GB (which at the time I thought would be plenty big) but I'm now realizing its too small! I wonder if it's possible to re-size HDD partition without reformatting and re-install my Windows 8. So that is my question, Can i enlarge os c drive of my windows 8 without having to re-format? I've used the Norton Partition Magic and Disk Management to make this happen but there doesn't seem to be any options to make it happen. Thanks for any help you guys can give regarding my question. I've worked hard to optimize my current install of Windows 8 and would hate to start all over again.

  Read the article

• Windows 8 "ate" 100GB of my SSD

  - by Eleeist

  Yesterday I've done a completely fresh Windows 8 Pro install on brand new Samsung SSD. I recall that just after the installation Windows was taking about 10GB. I've installed all the updates and when today I entered My Computer I've almost got a heart attack: disk C: 12.3 GB free of 118 GB! The file explorer, when I enter the disk highlight everything and go to Properties, tells me that the files in there take only 22.5 GB of space which seems reasonable. So where is my 100 GB?

  Read the article

• TrueCrypt partition will no longer mount

  - by sparkyuiop

  I am hoping for some advice to help me out of my situation, with luck. I have a computer running Windows 7 Ultimate x64 with 3 hard disks installed. On my 2TB hard disk 2 (non-system disk) I have 4 partitions. One is for music, another for video, a downloads partition and a 500GB RAW Truecrypt encrypted partition / volume that I had setup to mount with 4 photographs used as keyfiles. The 4 photographs are located in my 'Documents' partition which is one of four partitions on my 1.5TB hard disk 1 (non-system disk) When I setup the disk encryption I did not (I'm 99% sure) create a password, I only used the 4 photograph keyfiles to mount the volume. Recently my 1TB hard disk 0 (system / boot) started to fail so I decided to replace it. I was going to clone the old disk to a new disk but decided that a fresh installation would be more beneficial. Once I had transferred all the required 'User Data' from my old hard disk 0 (C: disk) I discarded it. I reinstalled Truecrypt, pointed to the partition, selected my 4 keyfiles photographs and I mounted my encrypted volume with no issues. In fact I mounted it several times after re-installing Windows and after reboots. Now all of a sudden when I try and mount it I get the message "incorrect keyfile(s) and/or password or not a Truecrypt volume". Now I am not sure why this happened as I do not recall exactly what I did between last mounting the volume successfully and it not mounting. Here are some of the possible things I may have done to cause it to stop working but I am at a loss as to where to start to try and resolve the problem. 1. I had swapped the drive letters to a preferred order. 2. I possibly swapped the physical SATA connectors on the mainboard. 3. I enabled 'Hot Plugging' for the two non-system hard disk SATA ports and the DVD SATA port in the BIOS. I have tried changing the encrypted partition drive letter as suggested in another post but this does not help. On my old system the encrypted drive was drive "X". I have about tried it with all the other free drive letters but alas nothing changes. I do not recall what drive letter was allocated to the encrypted partition before I changed them all. I have not tried to change the letter back to what it possibly was to start with as I am happy with the current layout. I will try this is anyone thinks it would be worthwhile though. I do hope I have managed to convey my situation in an understandable manner and live in hope someone could help me recover years of personal files. Thank you very much for taking the time to read my post and for any suggestions you may offer. Regards Phillip Thorne (UK) Anyone???

  Read the article

• Hard drive self monitoring system

  - by Hoorayo

  I have a 500GB HDD on my desktop, and there are two partitions as C and D. The computer would not start and shows me a error message. Notice - Hard drive self monitoring system has reported that a parameter has exceeded its normal operating range. Dell recommends you that you back up your data regularly. A parameter out of range may or may not indicate a potential hard. So I took the hdd out of the desktop and made a USB external HDD. My laptop recognizes the hard drive as “I” drive and “J” drive. I am able to click “J” and see folders and files. But there is no response when I click “I” while it makes weird clicking sound. Can anyone explain why I drive doesn't work while J drive works on same physical hard drive? Is there anyway that I can fix?

  Read the article

• Role of MBR in the booting process

  - by pg4421

  I am new to stack overflow. So please correct me if my question seems irrelevant or stupid. I read here in Booting Process : The job of the primary boot loader is to find and load the secondary boot loader (stage 2). It does this by looking through the partition table for an active partition. When it finds an active partition, it scans the remaining partitions in the table to ensure that they're all inactive. When this is verified, the active partition's boot record is read from the device into RAM and executed. The question is that I am having a Hard disk which has two Operating System images windows and ubuntu and hence both partitions in which they reside are active. Then why do we have only one active partition always? (I know that active partition is one of the primary partition but then why we are giving special reference to one primary partition? ) I am confused a bit. Please solve my query. Thank you so much.

  Read the article

• windows 8 stops working after gparted

  - by Xavier T

  My laptop (windows 8.1) has a big partition so i would like to spit it into two smaller partitions. I tried hirens boot and jumped into gparted (something i have never used before) I resized windows partition (c:) and created a new partition, reboot, and my laptop cant boot I am seeing in gparted - sda1 ntfs recovery 300MB - sda2 fat32 100MB - sda3 unknown 128MB msftres - sda4 is my original C partition - sda5 is the new partition I tried with Windows 8 DVD there are options to automatically fix but it did not work. I also tried with make PC fresh or something like that and windows told me it cant fix because the drive is locked. Any help would be greatly appreciate. I stop playing with the tool now. GParted 0.7.0 of Hirens 13

  Read the article

• Shrinking windows and recovery partitions on the samsung new series 9

  - by bobbaluba

  I just bought a samsung NP900X3C, and as I was going to install linux, I noticed the windows partitions and recovery partitions occupied a major portion of the disk. The disk is a 128 GB SSD, and I want to keep the windows partition in order to play some games once in a while, but the windows disk is already 45GB full (with no installed programs) and the recovery partition is 20GB. That leaves under 60 GB for linux, which is not optimal, since that is what I'm going to be using most of the time, and there would be no room for games on the windows partition. There are also two small partitions that I don't know what are doing, one 100mb at the start of the disk that I'm guessing is some kind of boot partition, and one 5GB, that is described as an OS/2 hidden C: drive What I'm wondering is: can i delete the recovery partition? What about the mystical 5gb partition? Here is what fdisk reports: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes 255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x83953ffc Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 198273023 99033088 7 HPFS/NTFS/exFAT /dev/sda3 198273024 207276031 4501504 84 OS/2 hidden C: drive /dev/sda4 207276032 250068991 21396480 27 Hidden NTFS WinRE

  Read the article

• SSD won't boot anymore

  - by LordrAider

  Yesterday I put the computer to sleep. Something went wrong because it didn't go fully to sleep. So I restarted the pc and now it won't boot windows 7 anymore. It said : "Please insert valid boot device". I ran Windows 7 restore disc and tried restoring, first it said, mbr fixed. No result but now it said : "Operating system could not be loaded" I ran Windows 7 restore disc again and then it said something about a corrupt partition and that he fixed it. But got the same msg at restart about operating system not found. I ran Windows 7 restore disc again and used diskpart and watched the volumes. My SSD shows up as RAW filesystem... not as NTFS. The size of the disk seems correct. In the bios it also shows up as Healthy disk. What could went wrong and could I recover data with testdisk? I assume something went wrong with the partition :(. It's a Plextor SSD 256M2P SSD, only 3 months old. Thx in advance

  Read the article

• Shrink Windows OS partition with unmovable files

  - by Tim

  I am trying to shink Windows 7 OS partition C: but cannot shrink as much as I plan due to unmovable files. I have tried Windows own defrag tool before but it does not move files that are unmovable. Here are some ideas I have learned from previous posts, and I hope at least one of them will work and wish to know the detail how to do: Inspired by this post, which suggests backup C:, then delete C: , create a smaller partition, and then copy the backup to the smaller partition. I was wondering if anyone here can confirm that Windows 7 will still work in this way? What reliable tools can be used for backuping the system, and deleting and creating partition, and then copying back the backup in this method? I am actually trying another way suggested in this post. I have identified what unmovable file currently stop further shrinking: \ProgramData\Microsoft\Search\Data\Applications\Windows\Projects\SystemIndex\Indexer\CiFiles\00010015.wid::$DATA If I understand correctly, the file belongs to Windows Search. Can I set up somewhere in Windows system settings to temperately eliminate the file and similar ones (because there are many similar files under the same directory which I guess will also stand in the way of shrinking and unmovable by defrag)? Any other idea that might work will also be appreciated. Thanks and regards!

  Read the article

• Mac: Resize windows partition w/o destroying data?

  - by jbehren

  Is there a method/utility to actively resize the partitions on a dual-boot macbook air, without destroying the contents? I made the Windows Partition too small initially, and all the places I've looked have stated that resizing now using bootcamp will destroy all data on the Win7 Partition. I would prefer free, but I'm open to a reasonably priced utility that can grow the Win7 partition into the available space (I can use bootcamp to shrink the OSX partition without any problems).

  Read the article

• “BAD” partition showing up in Partition Manager

  - by Quintin Par

  I tried to partition my primary hard disk (NTFS partitions) with qtparted and got stuck in the process. Consequently I had to kill the process and exit my knoppix live CD boot up. Even though I was expecting XP to get corrupted, it booted fine and showed up all the drives accessible. But when I opened this with partition manager 8, it shows up as “BAD”. I ran chkdsk /f without any success. My objective with qparted and partition magic was to resize my existing partitions and add some space to c: How do I fix this problem and resize my partitions? Edit: Here's how my primary drive as per Windows is:

  Read the article

• make a computer recognized as a usb flash drive?

  - by user137560

  Is there anyway to make a folder or a partition on a computer (Linux/windows) to act like a flash drive to other computers or devices when connected with a usb cable. For example, I have a windows 7 computer with 2 partitions c and d, then connect that computer to another computer or a smart TV using a USB cable (has to be male to male USB cable) then the other computer or TV recognizes the current computer as a usb device. Is that possible, if not is there any usb switch to connect an external hard drive or flash drive to both the computer and TV without the need to manually switch them (I know about some USB switches but they only support automatic switching with some certain types of printers, not with mass storage) Thanks in advanced! Sam

  Read the article

• How to un-partition a drive on windows 7

  - by Michael Rentmeister

  I bought this laptop used from a friend. The laptop has 500gb of storage; however, the drive is partioned. The C: drive has an allocated space of 50gb whereas the partition has 396gb allocated to it. How do i either take some of the space from the partition and move it to the C: drive, or get rid of the partition? I've done some searching and people say I'm supposed to be able to use "Disc Management" to "delete volume," but when i right click on the partition the "delete volume" is not enabled. Here is a picture:

  Read the article

• How to copy data (clone) from one partition to another in Windows XP?

  - by Martin

  I have installed a new hard drive in our PC running Windows XP and I wonder how to transfer the data from the old (small) data partition to the new (large) one. My question concerns only a data partition containing files and folders (not the boot partition with the Operating System files!) Is it ok to just copy the folders in the Windows XP Explorer to the new partition? Could anything be lost this way (hidden folders, metadata, ..)? What is the best way to clone a data partition in Windows XP?

  Read the article

• How many bootable partitions are possible to have on one hard drive?

  - by draiden

  This may not be the correct place to post this; if that's the case, just let me know and point me in the right direction please! I'm thinking of building a box that needs to be lightweight and portable, and would need to be able to boot multiple installations of windows. I am needing to have multiple installations so that I can, for example, plug the box in to the network at one location, boot in to that location's partition, and have full access to everything I would normally need to do on a computer that has already been set up on that network. Then, when I go to the next client, I would be able to do the same thing, with the new location's partition, and have all of those network settings, drive mappings, etc., available there. Obviously I'd need to go through and set them all up on the different locations/networks, I'm not expecting it to magically know where I am and what I'm doing. It would be like I'm carrying around a computer that is configured for each place I need to go in one little box, instead of having to have multiple computers or having to reconfigure all the settings and such every time I go to another client. Or is there an easier way to do this that I haven't learned of?

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >