Search Results

Search found 2453 results on 99 pages for 'recovery'.

Page 30/99 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • Ways to recover data from external hard drive

    - by Howard Benson
    I use an external hard disk for backup of my mac with time machine (OS 10.5.8). I have made something wrong and I have found important folders in the recycler bin. These folders come from external hd. They are backup folders (backups.backupdb) and others. I have tried to restore them draggin and dropping. Some of them came back in the external hd in a while. For the others it takes hours to "preparing to copy" and then it has said "there's no space to copy" on ext hd. It's strange. Files are now in the recycle bin (180gb), and the ext had should have lot of free space. But it isn't really so. Ext hd is not free of space even if these files are in the bin. I ask for advices. I'm not also able to use time machine now (and i have "lost" old backups) for the same reason. Ext hd says that it has not free space.. Thanks

    Read the article

  • USB drive is empty in drive management

    - by Simon Verbeke
    I've got a USB drive here, that somebody asked to try and fix. When inserting it, it shows up in explorer, but when I double click it I get a message saying "Please insert a disk into drive H:". So I went to disk management, to see if it was correctly formatted. It doesn't show up in the upper pane, and in the lower pane it tells me there is no medium in H:. After this I used chkdsk: the path is invalid. Then I tried TestDisk, which is supposed to look at raw data, and this can't even find the disk. So I'm assuming the drive is dead, even though its LED is burning. But I was wondering if there might be something else I could try? This system is Windows 7 Ultimate 64bit by the way. (I'm translating things from a Dutch install, so some names might be wrong)

    Read the article

  • effective back-up using Raid / Win7 back-up

    - by Job
    I have a stand-alone pc system with two 2 tb harddiscs, one of which configured as Raid1, i.e. mirorring. The operational drive is partitioned. I use an external 1 tb harddisc for back-up using Windows 7 back-up facility which will be swapped weekly and stored on other premises. I back-up all partitions AND allow a system back-up. All application software is on the C: partition. Questions: How can I see whether Raid1 is working; i.e. is doing its job. All I see now is a status message in the start-up procedure that says its status is normal. How can I see used or available space on Raid 1? The Win-7 backup allows for 1 schedule only as far as I can see. I want daily back-ups of data. However due to the single schedule I am forced to do the time-consuming system back-up and c: back-up as well. Is there a way to activate two schedules allowing a frequent (daily) data back-up and a system back-up with c: drive back-up on a say weekly basis? Of course it can be forced by hand but I am likely to forget that. I am not the programming type of person so looking for simple and controllable solutions. Thank you - any help is apreciated.

    Read the article

  • Recovering mail from hardrive (broken os).

    - by Maciek Sawicki
    Hi, Friend of mine broke his Windows (doesn't boot). I will probably have to reinstall OS. I want to mount his hard drive in my OS to beck up some important files. He sad he uses Outlook express, but he Use Vista so I'm not sure it's Vistas Mail Client or Outlook. What files I have to copy to backup mail and adders book from Outlook, Outlook Express and Windows Mail? Is it any good program for doing it automatically (for Linux or Windows)? If there are tools or special procedures for other mail clients (for example Thunderbird) you can also name them to make this question more generic.

    Read the article

  • KeePass lost password and/or corruption due to Dropbox/KeePassX

    - by GummiV
    I started using Keepass about a month ago to hold my passwords and online accounts info. Everything was stored in a single .kdb file, only protected with a password. I'm using Windows 7. Now Keepass can't open my .kdb file with the error "Invalid/wrong key". I'm fairly confident I have the right password. Altough I might have mixed up a few letters I've tried about two dozen different combinations to minimize that possibility - but can't rule it out though. My guess is however that the .kdb file got corrupted, either due to Dropbox syncing (only using it on one computer though) or because I edited the file using KeePassX on Ubuntu (dual boot on the same computer, accessing a mounted Win7 NTFS partition), or possibly a combination of both. I have tried restoring older versions(even the original one) from Dropbox and trying out all possible passwords without any luck. (which does seem to rule out KeePassX as the culprit, since oldest copies are before I edited the file from Ubuntu) I have tried opening the file with the "Repair KeePass Database file" which always gives the "0xA Invalid/corrupt file structure" (the same error for when a wrong password is typed). I was wondering if there was any way for me to salvage my hard-gathered data. I know generally that brute force cracking is not feasible, but since I can remember probably more than half of the usernames/passwords, any maybe the fact that one of them does come up fairly often (my go-to pass for trivial stuff), that might simplify the brute force process to a doable time frame. Maybe the brute-force thing might incorporate the fact that I know the password length and what characters it's made from. (If we assume corruption, not a password-blackout on my part) I could do some programming if there are any libraries or routines that I could use. Other people seem to have had a similar probem http://forums.dropbox.com/topic.php?id=6199 http://forums.dropbox.com/topic.php?id=9139 http://www.keepassx.org/forum/viewtopic.php?t=1967&f=1 So hopefully this question will become a suitible resource for people when searching the web. Feel free to tell me if you think this should rather be a community wiki.

    Read the article

  • USB Flash drive corrupt files - Help needed

    - by Michael
    I have a 16gb usb flash drive with 8gb worth of data that I can't afford to lose. When I inserted it into my pc, inside the folder that I was storing the data I saw unintelligible characters and nothing in there would open. I ran, windows scandisk and the files (unfortunately) disappeared. I can see that the drive's space still appears to be taken up with data, about 8gb. What should I do to recover it? Is it possible? Thanks in advance... Michael

    Read the article

  • machine crash when connecting to external harddisk

    - by Gnot
    i recently had a problem with my laptop. when i booted up the machine, i would get a SMART failure error message and when i pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. thinking that my hard disk was dying, i bought a new hard disk and installed on my laptop and so now my laptop is alright. however i need to recover data from that old hard disk, so i bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. the first few times when i connected, i could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. but now whenever i connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. do you think my old hard disk is dead beyond repair? or you can offer some help here? any assistance would be appreciated!

    Read the article

  • Looking for fault-tolerant, multi-CD/DVD burning software

    - by MichaelKay
    A few years back, I saw an open-source application that created fault-tolerant, multi-CD backup sets. The thought was that if a few sectors went bad on one CD, the data could be reconstructed from others similar to a RAID 5 hard-drive setup. I did some searching and I could not find the application again. Does anyone know of a application that works in this manner. It needs to work with both CDs & DVDs. Linux or Windows will be OK.

    Read the article

  • How to boot a partition using a virtual pc.

    - by Fantomas
    I have backed up my failing hard drive using a ddrescue Linux command to two partition files - p1 and p2 5GB and 90GB each. Now, without saving this back to an actual disk - is there a way for me to boot my old computer virtually, using Virtual PC or Parallels or VMWare? How? Thank you.

    Read the article

  • How to get data out of a Maxtor Shared Storage II that fails to boot?

    - by Jonik
    I've got a Maxtor Shared Storage II (RAID1 mode) which has developed some hardware failure, apparently: it fails to boot properly and is unreachable via network. When powering it on, it keeps making clunking/chirping disk noise and then sort of resets itself (with a flash of orange light in the usually-green LEDs); it then repeats this as if stuck in a loop. In fact, even the power button does nothing now – the only way I can affect the device at all is to plug in or pull out the power cord! (To be clear, I've come to regard this piece of garbage (which cost about 460 €) as my worst tech purchase ever. Even before this failure I had encountered many annoyances about the drive: 1) the software to manage it is rather crappy; 2) it is way noisier that what this type of device should be; 3) when your Mac comes out of sleep, Maxtor's "EasyManage" cannot re-mount the drive automatically.) Anyway, the question at hand is how to get my data out of it? As a very concrete first step, is there a way to open this thing without breaking the plastic casing into pieces? It is far from obvious to me how to get beyond this stage; it opens a little from one end but not from the other. If I somehow got the disks out, I could try mounting the disk(s) on one of the Macs or Linux boxes I have available (although I don't know yet if I'd need some adapters for that). (NB: for the purposes of this question, never mind any warranty or replacement issues – that's secondary to recovering the data.)

    Read the article

  • SEAGATE Barracuda 7200.11 HDD not running

    - by Dane411
    After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

    Read the article

  • Can not copy files after installing windows

    - by Ali
    I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

    Read the article

  • Is ECC mandatory in SSD technology?

    - by Alexander Shcheblikin
    While shopping for an SSD I have noticed that some manufacturers promote their "Pro" models as the ones sporting ECC data protection. Those manufacturers do not mention ECC in their budget models descriptions. However, Wikipedia article on flash memory states that "NAND relies on ECC to compensate for bits that may spontaneously fail during normal device operation." So the question is does any SSD device use ECC behind the scenes for its normal operation and is that ECC "feature" just a marketing ploy?

    Read the article

  • What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

    - by Forgiver
    I have an external hard drive that is connected to my computer (Windows 7 Ultimate 64 bit) via a USB port. BitLocker has been activated on the hard drive to protect the data. Yesterday I started downloading a huge data from the internet but now it failed to complete because of CRC error. I tried to repair it with chkdsk f:/r where f is the drive letter of that hard drive. There are many messages reporting "unreadable" as follows: What caused Cyclic Redundancy Check error on my BitLocker-enabled external hard drive and how to fix it?

    Read the article

  • Recover data from Dynamic Disk (MBR) bigger than 2TB

    - by Helder
    Here is the situation: Promise Array FastTrak TX4310 with 3 disks (750 GB each) in RAID5. This comes to around 1500 GB of data. Last week I had the idea of expanding the RAID with an additional 750 GB disk. This would bring the volume to around 2250 GB. I plugged the disk and used the Webpam software to do the RAID expansion. However, I didn't count with the MBR 2TB limit, as I didn't remembered that the disk was using MBR instead of GPT and I didn't check it prior to the expansion. After a couple of days of expansion, today when I got home, the disk in Windows disk manager showed the message "Invalid disk" and when I try to activate it, it says "The operation is not allowed on the Invalid pack". From what I figured, the logical volume on the RAID expanded, and passed that info to the Windows layer and I ended up with an "larger than 2TB" MBR disk. I'm hopping that somehow I can still recover some data from this, and I was wondering if I can "rewrite" the MBR structure back to the 1500 GB partition size, so I can access the partition in Windows. Right now I'm doing an "Analyse" with TestDisk, as I hope the program will pickup the old 1500 structure and allow me to somehow revert back to it. I think that even though the Logical Drive in the RAID is bigger than the 2TB, I can somehow correct the MBR to show the 1500 GB partition again. I had a similar problem once, and I was able to recover the data using a similar method. What do you guys think? Is it a dead end? Am I totally screwed because there is the extra RAID layer that I'm not counting? Or is there other way to move with this? Thanks all!

    Read the article

  • Looking for suggestions for hosting Windows 2000 Server in the cloud / VPS / etc?

    - by JohnyD
    I have a Windows 2000 Server, currently virtualized in Hyper-V, that I would like to get running off-site as a backup (cloud, VPS, etc). You can't virtualize in EC2 and I'm fairly certain there are no Server 2000 AMI's floating about (correct me if I'm wrong!). If anyone has a recommendation on how I can get a virtualized Windows 2000 Server running in a secure, remote environment I would be grateful. As far as locations go I'd be interested in both North America as well as Australia and Europe. In a nutshell, we're ploughing our way out of a legacy codebase and this server is the last that remains of the legacy apps. However, it is still very much used by our clients. Everything is backed up each night (data, images, etc) to tape which is then taken offsite. However, in the event of a fire I would love to have a backup legacy server to point DNS records to. So while I am rebuilding from the ashes our services would already be available. It would save a lot of time and make my managers all the more happy (and that's what it's all about, riighhtt? :D) Thank you all for your suggestions. Please let me know if I've left out any important information. Additional info: - the legacy codebase does not function properly in Server 2003

    Read the article

  • XP can't read data from transferred HD

    - by Alexander Miller
    Computer A, running XP, died. XP was installed on a fresh HD in computer B. Slaved data-backup HD from A was installed as slave on B. B will not read it; shows only 2 folders, Recycler and System Volume Info. All of these are older machines with IDE drives. What's going on & how can I read/transfer the data from the transferred drive? This was only a trial run. Actually I will need to transfer the master HD from A - which has XP on it - and read from its data partition because (blush) the backup drive was not up to date.

    Read the article

  • How do I recover jegs with zero bytes?

    - by Jill
    I downloaded some wedding photos into my external drive about a month ago. A total of 3 cards were downloaded into 3 different files. The first file lists all of the photos, about 600 images, but they have zero bytes. The other 2 files are fine. I can't recover the compact flash card because I have used it too many times since then. Is there any way to recover the images on my drive?

    Read the article

  • General High-Level Assessment

    - by tcarper
    Guys and Gals, I've been tasked with a doozy of an assignment. The objective is something akin to "laying of hands" on several database servers which work in concert to provide data to various Web, Client-Server and Tablet-Sync'd distributed Client-Server programs. More specifically, I've been asked to come up with a "Maintenance Plan" which includes recommendations for future work to improve these machines' performance/reliability/security/etc. Might there be some good articles on teh interwebs ya'll could point me towards which would give me some good basis to start? Articles describing "These are the top 4 overarching categories and this is how you should proceed when drilling down on each of them" sort-of-thing would be fabulous. The Databases are all SQL 2005, however the compatibility level is 80 and they were originally created with ERwin based on SQL 6.5. The OSs are all Windows Server 2003. Thanks all! Tim

    Read the article

  • Any way to recover ext4 filesystems from a deleted LVM logical volume?

    - by Vegar Nilsen
    The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

    Read the article

  • Different BSOD every time I turn on computer

    - by Gemboz
    Please help. Every time I turn on computer I receive a different BSOD. I can't even give my computer info because I haven't been able to stay on it long enough. The following are the BSOD that I just received in the last hour. IRQL_NOT_LESS_OR_EQUAL PAGE_FAULT_IN_NONPAGED_AREA BAD_POOL_HEADER MEMORY_MANAGEMENT I has also started with Windows Error Recovey which I have done but that has froze on me or hasn't helped. I have also reset computer to its original state. Now as soon as I turn on it goes to a BSOD almost immediately. I know you need more info about computer, so if you can tell me what info it is you need, I will get it. I can tell you that it is a desktop.

    Read the article

  • All application passwords lost on Windows 7

    - by Rynardt
    A couple of days ago I changed my Windows 7 login password. My laptop is on my company's domain, so password changes are done over the internal network. Since changing the password I noticed that all my saved Chrome passwords are missing. Also Skype, Windows Live, Internet Explorer and Outlook lost their saved passwords. I guess there could be more applications with lost passwords, but I have not opened them yet. This makes me think that most applications saves their passwords to a general password vault on the Windows system and this vault got somehow corrupted when I changed my domain login password for windows. Do anyone have any idea of how to fix this and prevent it from happening again? EDIT : More Info I do development work at the office, so most of the time I bypass the firewall and connect directly to the internet gateway. Now and then I would connect to the company wifi network to do printing and access files on a NAS. So by default my laptop does not connect to the wifi hotspot. On this occasion to update the password, I had to connect to the wifi. So referring to the comment by OmnipotentEntity below, could this have happened when the system rebooted without a connection to the network as the laptop does not auto connect to the wifi hotspot?

    Read the article

  • should i and how do i backup my database for a webapp that is hosted on amazon ec2 server?

    - by user8184
    I set up an amazon ec2 instance using ubuntu server edition. I install LAMP stack on it. I did up a php web app running on mysql. I have not officially launched, but I need to know this before launching. Should I backup my database data? If so, how should I do it as cost effective as possible? Previously for another web app, i wrote a perl or bash script (cannot remember) that will be executed by cron on a daily basis. The script will then backup the database into a single .sql file and send as email attachment to my gmail account. That web app was on shared hosting hence, I was quite sure i needed to do backup of my database. My files are on git repo so I am not worried about that. Please advise. I am totally unfamiliar with AWS. Only know as much as setting up an account. That is all. Thank you.

    Read the article

  • How can I recover my ext4 ubuntu partition from my windows parition?

    - by officespace
    I dual boot windows and ubuntu 10.04. I accidentally did an rm -r * in my home directory and deleted a bunch of files and folders that I need to recover. How can I recover these files from my windows xp partition? If there's isn't a way to do this from windows, what's the best way to do it in ubuntu? I'd prefer a graphical interface if that's possible. I appreciate the help.

    Read the article

  • Lost Root and other user passwords

    - by Webnet
    This isn't a huge deal, because there's very little on the server (literally a file or two) that we actually need off of it. But we disabled root logins as a security measure and can't remember any of our other user passwords. I'm assuming that there's nothing we can do at this point to get into the server? I'm sitting next to the box... Update Oops... actually, I need to export an SVN off of this server. So yeah, there's stuff I need.

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >