Search Results

Search found 50510 results on 2021 pages for 'static files'.

Page 30/2021 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• VSS - Solution file between multiple users

  - by BhejaFry

  Hi folks, we have a solution with multiple projects that is being developed by a team of developers. Project paths in the solution file checked in initially contains the path that are specific to that developer. Now when another dev gets latest of the solution, some of the projects won't load as the path differs. What's a better way to manage this ? TIA

  Read the article

• How to resize a /home partition in Kubuntu?

  - by Devon

  I was distro hopping for awhile in the past few months, so in order to keep all of my files secure, I made a partition of around 50 GB named Files to store all of my files in, and still have them for quick and easy access. However, now that I've found a distribution I'm comfortable with (Kubuntu 11.10), I would like to remove this partition, and have all of my files in my /home folder, in order to more easily deal with these files. I've moved all of my files in the partition to my /home folder (and still have plenty of room to spare), and now I'm trying to delete the partition and use the space for my /home folder. I can delete the partition just fine, however, I can't extend the /home folder into the unallocated space. Here's a screenshot of what I'm talking about. In order to change the size of the /home partition, I need to unmount it. But, I am unable to unmount it! How do I best extend the size of the partition?

  Read the article

• C++ Building Static Library Project with a Folder Structure

  - by Jake

  I'm working on some static libraries using visual studio 2012, and after building I copy .lib and .h files to respective directories to match a desired hierarchy such as: drive:/libraries/libname/includes/libname/framework drive:/libraries/libname/includes/libname/utitlies drive:/libraries/libname/lib/... etc I'm thinking something similar to the boost folder layout. I have been doing this manually so far. My library solution contains projects, and when I update and recompile I simply recopy files where they need to be. Is there a simpler way to do this? Perhaps a way to compile the project with certain rules per project as to where the projects .h and .lib files should go?

  Read the article

• Light mask map and camera for static lights in XNA Platformer

  - by JiminyCricket

  Using the example for some basic light maps found here : http://blog.josack.com/2011/07/xna-2d-dynamic-lighting.html, I've managed to create a lightmap texture using individual lightmaps and display it over a 2D tiled world as in the Platformer example. I'm using the very basic 2D camera example as found here : http://www.david-amador.com/2009/10/xna-camera-2d-with-zoom-and-rotation/, and the problem is that the lightmap texture scrolls with the player sprite. This looks pretty good and would be excellent for lighting the player sprite as it moves. But, I also want to be able to place static lights (or some initial position for the lights) that do not move with the player or camera. When I turn off the camera or give it a static position, it works as a series of static lights so I believe it's probably caused by the camera transformation matrix following the player around. I'm using RenderTarget2Ds, one for the main game screen after all the backgrounds and tiles are rendered, and one for the "lightmap" which consists of a black background and a bunch of lighting textures which are merged with it using additive blending. For now, I'm doing all of this in PlatformerGame.cs where the camera transformation and position is set and the level.Draw() call is made. I can't figure out how to separate the drawing of the lightmap and the camera following the player. I was thinking it would be better to render the shadows and lighting directly in the drawing of the level itself, but I'm not sure how to do that either because this technique requires RenderTarget2Ds and calling SpriteBatch.Begin()/End().

  Read the article

• What are the use cases for this static reflection code?

  - by Maslow

  This is Oliver Hanappi's static reflection code he posted on stackoverflow private static string GetMemberName(Expression expression) { switch (expression.NodeType) { case ExpressionType.MemberAccess: var memberExpression = (MemberExpression)expression; var supername = GetMemberName(memberExpression.Expression); if (String.IsNullOrEmpty(supername)) return memberExpression.Member.Name; return String.Concat(supername, '.', memberExpression.Member.Name); case ExpressionType.Call: var callExpression = (MethodCallExpression)expression; return callExpression.Method.Name; case ExpressionType.Convert: var unaryExpression = (UnaryExpression)expression; return GetMemberName(unaryExpression.Operand); case ExpressionType.Parameter: return String.Empty; default: throw new ArgumentException("The expression is not a member access or method call expression"); } } I have the public wrapper methods: public static string Name<T>(Expression<Action<T>> expression) { return GetMemberName(expression.Body); } public static string Name<T>(Expression<Func<T, object>> expression) { return GetMemberName(expression.Body); } then added my own method shortcuts public static string ClassMemberName<T>(this T sourceType,Expression<Func<T,object>> expression) { return GetMemberName(expression.Body); } public static string TMemberName<T>(this IEnumerable<T> sourceList, Expression<Func<T,object>> expression) { return GetMemberName(expression.Body); } What are examples of code that would necessitate or take advantage of the different branches in the GetMemberName(Expression expression) switch? what all is this code capable of making strongly typed?

  Read the article

• Is it bad practice to have state in a static class?

  - by Matthew

  I would like to do something like this: public class Foo { // Probably really a Guid, but I'm using a string here for simplicity's sake. string Id { get; set; } int Data { get; set; } public Foo (int data) { ... } ... } public static class FooManager { Dictionary<string, Foo> foos = new Dictionary<string, Foo> (); public static Foo Get (string id) { return foos [id]; } public static Foo Add (int data) { Foo foo = new Foo (data); foos.Add (foo.Id, foo); return foo; } public static bool Remove (string id) { return foos.Remove (id); } ... // Other members, perhaps events for when Foos are added or removed, etc. } This would allow me to manage the global collection of Foos from anywhere. However, I've been told that static classes should always be stateless--you shouldn't use them to store global data. Global data in general seems to be frowned upon. If I shouldn't use a static class, what is the right way to approach this problem? Note: I did find a similar question, but the answer given doesn't really apply in my case.

  Read the article

• Is it possible to declare multiple static variable with same name in a single C file?

  - by Mohammed Khalid Kherani

  Hi Experts, Is it possible to declare multiple static variables of same name in a single C file with different scopes? I wrote a simple programme to check this and in gcc it got compiled and worked fine. code: static int sVar = 44; void myPrint2() { printf("sVar = %d\n", sVar++); } void myPrint() { static int sVar =88; printf("sVar = %d\n", sVar++); } int main(void) { static int sVar = 55; int i = 0; for (i = 0; i < 5; i++) myPrint(); printf("sVar = %d\n", sVar); myPrint2(); return(0); } Now my question is since all "static" variable will reside in same section (.data) then how we can have multiple variable with same name in one section? I used objdump to check the different section and found that all Static variables (sVar) were in .data section but with different names 0804960c l O .data 00000004 sVar 08049610 l O .data 00000004 sVar.1785 08049614 l O .data 00000004 sVar.1792 Why compiler is changing the name of variables (since C doesnt support name mangling)? Thanks in advance.

  Read the article

• Are there any guarantees in JLS about order of execution static initialization blocks?

  - by Roman

  I wonder if it's reliable to use a construction like: private static final Map<String, String> engMessages; private static final Map<String, String> rusMessages; static { engMessages = new HashMap<String, String> () {{ put ("msgname", "value"); }}; rusMessages = new HashMap<String, String> () {{ put ("msgname", "????????"); }}; } private static Map<String, String> msgSource; static { msgSource = engMessages; } public static String msg (String msgName) { return msgSource.get (msgName); } Is there a possibility that I'll get NullPointerException because msgSource initialization block will be executed before the block which initializes engMessages? (about why don't I do msgSource initialization at the end of upper init. block: just the matter of taste; I'll do so if the described construction is unreliable)

  Read the article

• Why am I am unable to open exe files?

  - by Aaron

  It doesn't matter what disk I use, it can not open the program. I keep getting the following error: Archive: /media/xxxxxxxx/INSTALL/_Setupa.exe [/media/xxxxxxxxxx/INSTALL/_Setupa.exe] End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /media/xxxxxx/INSTALL/_Setupa.exe or /media/xxxxxxxxx/INSTALL/_Setupa.exe.zip, and cannot find /media/xxxxxxxxx/INSTALL/_Setupa.exe.ZIP, period. Any ideas?

  Read the article

• socket.accept error 24: To many open files

  - by Creotiv

  I have a problem with open files under my Ubuntu 9.10 when running server in Python2.6 And main problem is that, that i don't know why it so.. I have set ulimit -n = 999999 net.core.somaxconn = 999999 fs.file-max = 999999 and lsof gives me about 12000 open files when server is running. And also i'm using epoll. But after some time it's start giving exeption: File "/usr/lib/python2.6/socket.py", line 195, in accept error: [Errno 24] Too many open files And i don't know how it can reach file limit when it isn't reached. Thanks for help)

  Read the article

• How to create file of files?

  - by TheMachineCharmer

  class Node { FooType Data; // I can save Data to file with extension .foo void Save() { // save Data to .foo file } } Now , class Graph { List<Node> Nodes; void Save() { foreach(Node node in Nodes) { node.Save(); } } } Now when I invoke someGraph.Save(); then it creates Nodes.Count number of files. I would like to appear those files as one file with extension somename.graph and be able to read it again as Nodes. How can I do this? Is there a way to bundle files into a single different file?

  Read the article

• Reason for monolithic data files

  - by Ali Lown

  Primarily this seems to be a technique used by games, where they have all the sounds in one file, textures in another etc. With these files commonly reaching the GB size. What is the reason behind doing this over maintaining it all in subdirectories as small files - one per texture which many small games use this, with the monolithic system being favoured by larger companies? Is there some file system overhead with lots of small files? Are they trying to protect their property - although most just seem to be a compressed file with a new extension?

  Read the article

• Are there any garanties in JLS about order of execution static initialization blocks?

  - by Roman

  I wonder if it's reliable to use a construction like: private static final Map<String, String> engMessages; private static final Map<String, String> rusMessages; static { engMessages = new HashMap<String, String> () {{ put ("msgname", "value"); }}; rusMessages = new HashMap<String, String> () {{ put ("msgname", "????????"); }}; } private static Map<String, String> msgSource; static { msgSource = engMessages; } public static String msg (String msgName) { return msgSource.get (msgName); } Is there a possibility that I'll get NullPointerException because msgSource initialization block will be executed before the block which initializes engMessages? (about why don't I do msgSource initialization at the end of upper init. block: just the matter of taste; I'll do so if the described construction is unreliable)

  Read the article

• Can I share files via SAMBA while in root?

  - by user212501

  I have a couple of things going on here. I am currently running UBUNTU 10.04 in root via "STARTX" command. The reason being is that I keep getting the "LOW GRAPHICS ERROR CODE" and I cant not start up normally. Now I have researched & researched the error. I mean I got my SUDO on........, o.k. I'm really done trying to fix this error. I just wanna re-install. (funny thing. This startx command is how Im using the laptop now, so I know that it is a software issue) So here's my dilemma that is inside another dilemma. I have about 30gigs of info that I need to get off the laptop before I can re-install. Any thoughts What say you? LOTR LOL

  Read the article

• Monitor flashes black when starting video files, opening folders with video files

  - by Bob

  My entire monitor flashes black for a second or so when starting any video file. It does the same thing when closing the file. It also does this when opening a folder that has video files and a thumbnail view, or when I do anything that presumably accesses the video stream inside a video file. It happens in VLC and Windows Media Player, though it occurs to me certain video editors I have like avidemux and virtualdub don't have that issue when opening video files... It also does not happen when watching flash-based videos on web sites. It doesn't seem to happen when Quicktime. I went through and uninstalled any extraneous programs a week or so ago and didn't see any change. I also updated the graphics card driver. What can I do to troubleshoot/fix this?

  Read the article

• Recovering files that do not appear in the Recycle Bin, but are in the $Recycle.bin folder on external drive

  - by Zach Morgan

  Problem: I have an NTFS external drive with a $Recycle.bin folder on the root (E:/$Recycle.bin/) that has about 70gb worth of data. For whatever reason, the folder is no longer a hidden system file and no Windows machine I have used the drive on will show the files in the actual Recycle Bin. What I Want To Do: I want to atleast view the recycle bin files from this external, and all of the help articles I have read just talk about deleting the folder all together. I plan on reformating the drive, but first I need to see if there are any important deleted files. What Didn't Work: Recuva - didn't see any of my files Resetting the external's Recycle Bin via command prompt and moving the old $Recycle.bin files into the new external $Recycle.bin folder (I didn't read this anywhere, just made it up on my own)

  Read the article

• How to make a static route when using two internet connections?

  - by webmasters

  I have asked a question here on how to choose which applications will use a 3G internet connection and which applications will use the LAN. User harrymc gave a very complete and interesting answer, pointing that this is possible using static routes for certain websites. Now, lets say I want to access google.com only through my 3G internet connection. How would that static root look like? google has the IP: 173.194.39.180 here is a print of my route table, the 3G Modem has the IP: 10.81.132.96 +-----------------------------------------------------------------------------+ ¦ IPv4 Route Table ¦ ¦ =========================================================================== ¦ ¦ Active Routes: ¦ ¦ Network Destination Netmask Gateway Interface Metric ¦ ¦ 0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.102 20 ¦ ¦ 0.0.0.0 0.0.0.0 10.81.132.97 10.81.132.111 286 ¦ ¦ 10.81.132.96 255.255.255.224 On-link 10.81.132.111 286 ¦ ¦ 10.81.132.111 255.255.255.255 On-link 10.81.132.111 286 ¦ ¦ 10.81.132.127 255.255.255.255 On-link 10.81.132.111 286 ¦ ¦ 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 ¦ ¦ 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 192.168.2.0 255.255.255.0 On-link 192.168.2.102 276 ¦ ¦ 192.168.2.102 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 192.168.2.255 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 192.168.2.102 276 ¦ ¦ 224.0.0.0 240.0.0.0 On-link 10.81.132.111 286 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 192.168.2.102 276 ¦ ¦ 255.255.255.255 255.255.255.255 On-link 10.81.132.111 286 ¦ +-----------------------------------------------------------------------------+

  Read the article

• Replacing files in a folder structure with files from an unsorted folder

  - by Andrew

  I have over 50,000 PDFs organized into folders in a file called PDFACT. I needed to compress these files so I ran them through Adobe to batch compress them and this worked—except Adobe could only output the files without their folder structure. So basically I have 50,000 PDFs set up in a folder with hundreds of subfolders, and everything was organized. I ended up with one folder with 50,000 compressed PDFs in it, just in alphabetical order. Somehow I need to replace all the orginal PDFs with their compressed copies. Let me give an example: In the folder PDFACT we have the following file: C:\PDFACT\BIG DINNER\BILL\NEWESTBILL.PDF … and in the output folder that Adobe created we have just: C:\COMPRESSED_PDF_FOLDER\NEWESTBILL.PDF This copy is smaller then the one in PDFACT and has the same name but it is just lumped in with every other PDF. The folder structure and subfolders are gone. Is there any way to replace all the larger uncompressed PDFS inside the orginal folder structure with their now compressed counterparts?

  Read the article

• Is it possible for a faulty processor to cause audio static/noise?

  - by Tom

  I have a Core 2 Extreme processor I received from a friend and have set up an XBMC box using it. However, I constantly get audio static whenever playing any music or videos. Here is a video of the sound: http://www.youtube.com/watch?v=SqKQkxYRVA4 I have tried replacing everything short of the case and the processor, including cables, audio interfaces, operating systems, ram, etc, leading me to think it might be either the case shorting out the motherboards I have tried or a faulty processor. Is it possible for a faulty processor to cause audio static/noise? Any feedback would be appreciated. Edit - Here's a list of things I have tried: Reinstalling OS Installing/upgrading/repairing PulseAudio/Alsa Installing alternate OSes, straight Ubuntu, Lubuntu, Xubuntu, Arch, Mint, Windows 7 Switching audio from the external card to internal Optical, audio out through HDMI, audio out through headphones Different ports on receiver (my main desktop sounds fine on the same sound system) Different optical cables Unplugging everything unnecessary from the motherboard (1 HD, 1 Stick of Ram, 1 Keyboard) Swapping out ram Swapping out the motherboard Replacing the Graphics Card (was replaced due to fan being noisy, not specifically for this problem) Different harddrives Swapping power supply Disabling onboard audio Switching Power Cable Plugging in through surge protector Plugging into different outlet on separate circuit

  Read the article

• Why cache static files with Varnish, why not pass

  - by Saif Bechan

  I have a system runnning nginx / php-fpm / varnish / wordpress and amazon s3. Now I have looked at a lot of configuration files while setting up the system, and in all of them I found something like this: /* If the request is for pictures, javascript, css, etc */ if (req.url ~ "\.(jpg|jpeg|png|gif|css|js)$") { /* Remove the cookie and make the request static */ unset req.http.cookie; return (lookup); } I do not understand why this is done. Most of the examples also run NginX as a webserver. Now the question is, why would you use the varnish cache to cache these static files. It makes much more sense to me to only cache the dynamic files so that php-fpm / mysql don't get hit that much. Am I correct or am I missing something here? UPDATE I want to add some info to the question based on the answer given. If you have a dynamic website, where the content actually changes a lot, chaching does not make sense. But if you use WordPress for a static website for example, this can be cached for long periods of time. That said, more important to me is static conent. I have found a link with some test and benchmarks on different cache apps and webserver apps. http://nbonvin.wordpress.com/2011/03/14/apache-vs-nginx-vs-varnish-vs-gwan/ NginX is actually faster in getting your static content, so it makes more sense to just let it pass. NginX works great with static files. -- Apart from that, most of the time static content is not even in the webserver itself. Most of the time this content is stores on a CDN somewhere, maybe AWS S3, something like that. I think the varnish cache is the last place where you want to have you static content stored.

  Read the article

• Tomcat directly serve static (css, js) files shared by multiple applications

  - by Josvic Zammit

  I'm using the ExtJS framework which has a bulk of js and css files that are used for all apps. I intend to share these between a number of web applications (different war files). For this reason I would like to serve ExtJS js and css directly from the web server, in my case Tomcat6, which can be used to serve static files, as in this helpful link. Therefore I put my files under /var/lib/tomcat6/webapps/ROOT/extjs/. The static files that are directly under that directory are served correctly, e.g. /extjs/ext.js correctly serves the file at /var/lib/tomcat6/webapps/ROOT/extjs/ext.js. However files in lower-level directories, for example /extjs/welcome/css/welcome.css, which should serve the file at /var/lib/tomcat6/webapps/ROOT/extjs/welcome/css/welcome.css, return a 404. TL/DR Tomcat serves static files only at top-level directory. A 404 is returned for files deeper in the hierarchy. Config file contents: server.xml application's web.xml

  Read the article

• Jar files for PDF generation through Java

  - by Debashree

  Where can i get the following jar files from-: adobe-livecycle-client.jar adobe-usermanager-client.jar adobe-utilities.jar? How do i download these jar files?

  Read the article

• how to copy files from folder to another folder

  - by AmRoSH

  I have Folder this Folder have some files and folders i need to copy just files from this folder to another one without coping the folders. if anyone understood that please i need some help.

  Read the article

• Creating the Previews of MS Office Files like word excel and PPT in cocoa

  - by marc

  Hi How can I create the preview image for MS Office files like word, excel , power point in cocoa. Can anyone suggest me on this like how to handle those file?. I tried using the Bitmap representation of the .doc files.It dint work.. Which API i can use?.. thank you..

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >