Search Results

Search found 8925 results on 357 pages for 'customer care and billing'.

Page 300/357 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

  • Which languages support *recursive* function literals / anonymous functions?

    - by Hugh Allen
    It seems quite a few mainstream languages support function literals these days. They are also called anonymous functions, but I don't care if they have a name. The important thing is that a function literal is an expression which yields a function which hasn't already been defined elsewhere, so for example in C, &printf doesn't count. EDIT to add: if you have a genuine function literal expression <exp>, you should be able to pass it to a function f(<exp>) or immediately apply it to an argument, ie. <exp>(5). I'm curious which languages let you write function literals which are recursive. Wikipedia's "anonymous recursion" article doesn't give any programming examples. Let's use the recursive factorial function as the example. Here are the ones I know: JavaScript / ECMAScript can do it with callee: function(n){if (n<2) {return 1;} else {return n * arguments.callee(n-1);}} it's easy in languages with letrec, eg Haskell (which calls it let): let fac x = if x<2 then 1 else fac (x-1) * x in fac and there are equivalents in Lisp and Scheme. Note that the binding of fac is local to the expression, so the whole expression is in fact an anonymous function. Are there any others?

    Read the article

  • Atomic Instructions and Variable Update visibility

    - by dsimcha
    On most common platforms (the most important being x86; I understand that some platforms have extremely difficult memory models that provide almost no guarantees useful for multithreading, but I don't care about rare counter-examples), is the following code safe? Thread 1: someVariable = doStuff(); atomicSet(stuffDoneFlag, 1); Thread 2: while(!atomicRead(stuffDoneFlag)) {} // Wait for stuffDoneFlag to be set. doMoreStuff(someVariable); Assuming standard, reasonable implementations of atomic ops: Is Thread 1's assignment to someVariable guaranteed to complete before atomicSet() is called? Is Thread 2 guaranteed to see the assignment to someVariable before calling doMoreStuff() provided it reads stuffDoneFlag atomically? Edits: The implementation of atomic ops I'm using contains the x86 LOCK instruction in each operation, if that helps. Assume stuffDoneFlag is properly cleared somehow. How isn't important. This is a very simplified example. I created it this way so that you wouldn't have to understand the whole context of the problem to answer it. I know it's not efficient.

    Read the article

  • Can ASP.net MVC 2 Project and CMS can be Combined together

    - by coolguy97
    Hi, I have developed project using Asp.net MVC 2.Now the content part of My site i don't want to build a Cms for that So my question is can i used any existing CMS developed in MVC2 so that The content part will be taken care of by the CMS and Application part by developed project by me. I have used CMS like Silverstripe which is quite easy which also provides ORM to develop application on their Sapphire engine which but developed in PHP. If it is Combined then when writing Code i will write like this [This just Sample Imaginary Code.I just want CMS to be easy] <logo><Pick_up_from_CMS ID=logo></logo> <menu><Pick_up_from_CMS ID=menu></menu> <header><Pick_up_from_CMS ID=header></header> <body> <Pick_up_from_CMS ID=body> <MY_Application_Logic ID=Logic1><!--This May be my Registration or Search form> --> </body> <footer><Pick_up_from_CMS ID=footer></footer>

    Read the article

  • how to push different local git branches to heroku/master

    - by lsiden
    Heroku has a policy of ignoring all branches but 'master'. While I'm sure Heroku's designers have excellent reasons for for this policy (I'm guessing for storage and performance optimization), the consequence to me as a developer is that whatever local topic branch I may be working on, I would like an easy way to switch Heroku's master to that local topic branch and do a "git push heroku -f" to over-write master on Heroku. What I got from reading the "Pushing Refspecs" section of http://progit.org/book/ch9-5.html is git push -f heroku local-topic-branch:refs/heads/master What I'd really like is a way to set this up in the config file so that "git push heroku" always does the above, replacing local-topic-branch with the name of whatever my current branch happens to be. If anyone knows how to accomplish that, please let me know! The caveat for this, of course, is that this is only sensible if I am the only one who can push to that Heroku app/repository. A test or QA team might manage such a repository to try out different candidate branches, but they would have to coordinate so that they all agree on what branch they are pushing to it on any given day. Needless to say, it would also be a very good idea to have a separate remote repository (like Github) without this restriction for backing everything up to. I'd call that one "origin" and use "heroku" for Heroku so that "git push" always backs up everything to origin, and "git push heroku" pushes whatever branch I'm currently on to Heroku's master branch, overwriting it if necessary. Can anybody tell me if this would work? [remote "heroku"] url = [email protected]:my-app.git push = +refs/heads/*:refs/heads/master I'd like to hear from someone more experienced before I begin to experiment, although I suppose I could create a dummy app on Heroku and experiment with that. As for fetching, I don't really care if the Heroku repository is write-only. I still have a separate repository, like Github, for backup and cloning of all my work. Footnote: This question is similar to, but not quite the same as http://stackoverflow.com/questions/1489393/good-git-deployment-using-branches-strategy-with-heroku

    Read the article

  • String method crashes program...

    - by TimothyTech
    Alright so i have two identical string methods... string CreateCust() { string nameArray[] ={"Tom","Timo","Sally","Kelly","Bob","Thomas","Samantha","Maria"}; int d = rand() % (8 - 1 + 1) + 1; string e = nameArray[d]; return e; } string CreateFood() { string nameArray[] = {"spagetti", "ChickenSoup", "Menudo"}; int d = rand() % (3 - 1 + 1) + 1; string f = nameArray[d]; return f; } however no matter what i do it the guts of CreateFood it will always crash. i created a test chassis for it and it always fails at the cMeal = CreateFood(); Customer Cnow; cout << "test1" << endl; cMeal = Cnow.CreateFood(); cout << "test1" << endl; cCustomer = Cnow.CreateCust(); cout << "test1" << endl; i even switched CreateCust with CreateFood and it still fails at the CreateFood Function... NOTE: if i make createFood a int method it does work...

    Read the article

  • Python Django Global Variables

    - by Joe J
    Hi all, I'm looking for simple but recommended way in Django to store a variable in memory only. When Apache restarts or the Django development server restarts, the variable is reset back to 0. More specifically, I want to count how many times a particular action takes place on each model instance (database record), but for performance reasons, I don't want to store these counts in the database. I don't care if the counts disappear after a server restart. But as long as the server is up, I want these counts to be consistent between the Django shell and the web interface, and I want to be able to return how many times the action has taken place on each model instance. I don't want the variables to be associated with a user or session because I might want to return these counts without being logged in (and I want the counts to be consistent no matter what user is logged in). Am I describing a global variable? If so, how do I use one in Django? I've noticed the files like the urls.py, settings.py and models.py seems to be parsed only once per server startup (by contrast to the views.py which seems to be parsed eache time a request is made). Does this mean I should declare my variables in one of those files? Or should I store it in a model attribute somehow (as long as it sticks around for as long as the server is running)? This is probably an easy question, but I'm just not sure how it's done in Django. Any comments or advice is much appreciated. Thanks, Joe

    Read the article

  • Is it possible to update old database from dbml file ? (C#, .Net 4, Linq, SQL Server)

    - by Emil
    Hi all, I began recently a new job, a very interesting project (C#,.Net 4, Linq, VS 2010 and SQL Server). And immediately I got a very exciting challenge: I must implement either a new tool or integrate the logic when program start, or whatever, but what must happen is the following: the customers have previous application and database (full with their specific data). Now a new version is ready and the customer gets the update. In the mean time we made some modification on DB (new table, columns, maybe an old column deleted, or whatever). I’m pretty new in Linq and also SQL databases and my first solution can be: I check the applications/databases version and implement all the changes step by step comparing all tables, columns, keys, constrains, etc. (all this new information I have in my dbml and the old I asked from the existing DB). And I’ll do this each time the version changed. But somehow I feel, this is NOT a smart solution so I look for a general solution of this problem. Is there a way to update customers DB from the dbml file? To create a new one is not a problem (CreateDatabase with DataContext), is there any update/alter database methods? I guess I’m not the only one who search for such a solution (I found nothing in internet – or I looked for bad keywords). How did you solve this problem? I look also for an external tool, but first for a solution with C#, Linq or something similar. For any idea thank you in advance! Best regards, Emil

    Read the article

  • JScrollPanel without scrollbars

    - by Erik Itland
    I'm trying to use a JScrollPanel to display a JPanel that might be too big for the containing Jpanel. I don't want to show the scrollbars (yes, this is questionable UI design, but it is my best guess of what the customer wants. We use the same idea other places in the application, and I feel this case have given me enough time to ponder if I can do it in a better way, but if you have a better idea I might accept it an answer.) First attempt: set verticalScrollBarPolicy to NEVER. Result: Scrolling using mouse wheel doesn't work. Second attempt: set the scrollbars to null. Result: Scrolling using mouse wheel doesn't work. Third attempt: set scrollbars visible property to false. Result: It is immidiately set visible by Swing. Fourth attempt: inject a scrollbar where setVisible is overridden to do nothing when called with true. Result: Can't remember exactly, but I think it just didn't work. Fifth attempt: inject a scrollbar where setBounds are overridden. Result: Just didn't look nice. (I might have missed something here, though.) Sixth attempt: ask stackoverflow. Result: Pending. Scrolling works once scrollbars are back.

    Read the article

  • Splitting MS Access Database - Front End Part Location

    - by kristof
    One of the best practices as specified by Microsoft for Access Development is splitting Access application into 2 parts; Front End that hold all the object except tables and the Back End that holds the tables. The msdn page links there to the article Splitting Microsoft Access Databases to Improve Performance and Simplify Maintainability that describes the process in details. It is recommended that in multi user environment the Back End is stored on the server/shared folder while the Front End is distributed to each user. That implies that each time there are any changes made to the front end they need to be deployed to every user machine. My question is: Assuming that the users themselves do not have rights to modify the Front End part of the application what would be the drawbacks/dangers of leaving this on the server as well next to the Back End copy? I can see the performance issues here, but are there any dangers here like possible corruptions etc? Thank you EDIT Just to clarify, the scenario specified in question assumes one Front End stored on the server and shared by users. I understand that the recommendation is to have FE deployed to each user machine, but my question is more about what are the dangers if that is not done. E.g. when you are given an existing solution that uses the approach of both FE and BE on the server. Assuming the the performance is acceptable and the customer is reluctant to change the approach would you still push the change? And why exactly? For example the danger of possible data corruption would definitely be the strong enough argument, but is that the case? It is a part of follow up of my previous question From SQL Server to MS Access 2007

    Read the article

  • Why does findstr not handle case properly (in some circumstances)?

    - by paxdiablo
    While writing some recent scripts in cmd.exe, I had a need to use findstr with regular expressions - customer required standard cmd.exe commands (no GnuWin32 nor Cygwin nor VBS nor Powershell). I just wanted to know if a variable contained any upper-case characters and attempted to use: > set myvar=abc > echo %myvar%|findstr /r "[A-Z]" abc > echo %errorlevel% 0 When %myvar% is set to abc, that actually outputs the string and sets errorlevel to 0, saying that a match was found. However, the full-list variant: > echo %myvar%|findstr /r "[ABCDEFGHIJKLMNOPQRSTUVWXYZ]" > echo %errorlevel% 1 does not output the line and it correctly sets errorlevel to 1. In addition: > echo %myvar%|findstr /r "^[A-Z]*$" > echo %errorlevel% 1 also works as expected. I'm obviously missing something here even if it's only the fact that findstr is somehow broken. Why does the first (range) regex not work in this case? And yet more weirdness: > echo %myvar%|findstr /r "[A-Z]" abc > echo %myvar%|findstr /r "[A-Z][A-Z]" abc > echo %myvar%|findstr /r "[A-Z][A-Z][A-Z]" > echo %myvar%|findstr /r "[A]" The last two above also does not output the string!!

    Read the article

  • Unit test insert/update/delete

    - by Kurresmack
    Hey, I have googled this a little and didn't really find the answer I needed. I am working on a webpage in C# with MSSQL and LINQ for a customer. I want the users to be able to send messages to each other. So what I do is that I unit test this with data that actually goes into the database. The problem is that I now depend on having at least 2 users who I know the ID of. Furthermore I have to clean up after my self. This leads to rather large unit tests that test alot in one test. Lets say I would like to update a user. That would mean that I would have to ceate the user, update it, and then delete it. This a lot of assertions in one unit test and if it fails with updating i have to manually delete it. If I would do it any other way, without saving the data to DB, I would not for sure be able to know that the data was present in the database after updating etc. What is the proper way to do this without having a test that tests a lot of functuality in one test?

    Read the article

  • Python: OSX Library for fast full screen jpg/png display

    - by Parand
    Frustrated by lack of a simple ACDSee equivalent for OS X, I'm looking to hack one up for myself. I'm looking for a gui library that accommodates: Full screen image display High quality image fit-to-screen (for display) Low memory usage Fast display Reasonable learning curve (the simpler the better) Looks like there are several choices, so which is the best? Here are some I've run across: PyOpenGL PyGame PyQT wxpython I don't have any particular experience with any of these, nor any strong desire to become an expert - I'm looking for the simplest solution. What do you recommend? [Update] For those not familiar with ACDSee, here's what it does that I care about: Simple list/thubmnail display of images in a directory Sort by name/size/type Ability to view images full screen Single-key delete while viewing full screen Move to next/previous image while viewing full screen Ability to select a group of images for: move to / copy to directory delete resize ACDSee has a bunch of niceties as well, such as remembering directories you've moved images to in the past, remembering your resize settings, displaying the total size of the images you've selected, etc. I've tried most of the options I could find (including Xee) and none of them quite get there. Please keep in mind that this is a programming/library question, not a criticism of any of the existing tools.

    Read the article

  • Obj-C: ++variable is increasing by two instead of one

    - by Eli Garfinkel
    I am writing a program that asks users yes/no questions to help them decide how to vote in an election. I have a variable representing the question number called questionnumber. Each time I go through the switch-break loop, I add 1 to the questionnumber variable so that the next question will be displayed. This works fine for the first two questions. But then it skips the third question and moves on to the fourth. When I have more questions in the list, it skips every other question. Somewhere, for some reasons, the questionnumber variable is increasing when I don't want it to. Please look at the code below and tell me what I'm doing wrong. Thank you! Eli import "MainView.h" import @implementation MainView @synthesize Question; @synthesize mispar; int conservative = 0; int liberal = 0; int questionnumber = 1; (IBAction)agreebutton:(id)sender { ++liberal; } (IBAction)disagreebutton:(id)sender { ++conservative; } (IBAction)nextbutton:(id)sender { ++questionnumber; switch (questionnumber) { case 2: Question.text = @"Congress should pass a law that would ban Americans from earning more than one hundred million dollars in any given year."; break; case 3: Question.text = @"It is not fair to admit people to a university or employ them on the basis of merit alone. Factors such as race, gender, class, and sexual orientation must also be considered."; break; case 4: Question.text = @"There are two Americas - one for the rich and one for the poor."; break; case 5: Question.text = @"Top quality health care should be free for all."; break; default: break; } } @end

    Read the article

  • Compile and optimize for different target architectures

    - by Peter Smit
    Summary: I want to take advantage of compiler optimizations and processor instruction sets, but still have a portable application (running on different processors). Normally I could indeed compile 5 times and let the user choose the right one to run. My question is: how can I can automate this, so that the processor is detected at runtime and the right executable is executed without the user having to chose it? I have an application with a lot of low level math calculations. These calculations will typically run for a long time. I would like to take advantage of as much optimization as possible, preferably also of (not always supported) instruction sets. On the other hand I would like my application to be portable and easy to use (so I would not like to compile 5 different versions and let the user choose). Is there a possibility to compile 5 different versions of my code and run dynamically the most optimized version that's possible at execution time? With 5 different versions I mean with different instruction sets and different optimizations for processors. I don't care about the size of the application. At this moment I'm using gcc on Linux (my code is in C++), but I'm also interested in this for the Intel compiler and for the MinGW compiler for compilation to Windows. The executable doesn't have to be able to run on different OS'es, but ideally there would be something possible with automatically selecting 32 bit and 64 bit as well. Edit: Please give clear pointers how to do it, preferably with small code examples or links to explanations. From my point of view I need a super generic solution, which is applicable on any random C++ project I have later. Edit I assigned the bounty to ShuggyCoUk, he had a great number of pointers to look out for. I would have liked to split it between multiple answers but that is not possible. I'm not having this implemented yet, so the question is still 'open'! Please, still add and/or improve answers, even though there is no bounty to be given anymore. Thanks everybody!

    Read the article

  • auto m3u creation

    - by newbie69
    Hi, I am looking for a solution to automatically create .m3u playlists for each music folder in my sdcard so that the music player can play music by folders. I had written a simple VB.Net app in the past that does exactly the above but apparently, it has to be run from Windows. Since I have no Java nor Android developing experience I found it quite hard to try to write a similar app that can be run directly from the phone. In a few words, the app does the following: 1) Searches the SD and lists all folders that contain 2 or more .mp3 files (just for user verification) 2) Creates in every listed folder above, a .m3u file that simply lists line-by-line all the mp3 files that exist in the specific folder. Is there such an app or could someone spare some time and give me some rough instructions on how to create it in Eclipse 3.5.2 environment? (device used: Motorola Droid/Milestone, Android 2.1) I don't care about any graphics or complex UI, just a script to execute the above procedure that would give every "playlist-supporting" music player in Android, the precious ability to play music by folders. I know it is too much to ask but just in case! Thanx in advance.

    Read the article

  • environment change in rake task

    - by Mellon
    I am developing Rails v2.3 app with MySQL database and mysql2 gem. I faced a weird situation which is about changing the environment in rake task. (all my setting and configurations for environment and database are correct, no problem for that.) Here is my simple story : I have a rake task like following: namespace :db do task :do_something => :environment do #1. run under 'development' environment my_helper.run_under_development_env #2. change to 'custom' environment RAILS_ENV='custom' Rake::Task['db:create'] Rake::Task['db:migrate'] #3. change back to 'development' environment RAILS_ENV='development' #4. But it still run in 'customer' environment, why? my_helper.run_under_development_env end end The rake task is quite simple, what it does is: 1. Firstly, run a method from my_helper under "development" environment 2. Then, change to "custom" environment and run db:create and db:migrate until now, everything is fine, the environment did change to "custom" 3. Then, change it back again to "development" environment 4. run helper method again under "development" environment But, though I have changed the environment back to "development" in step 3, the last method still run in "custom" environment, why? and how to get rid of it? --- P.S. --- I have also checked a post with the similar situation here, and tried to use the solution there like (in step 2): ActiveRecord::Base.establish_connection('custom') Rake::Task['db:create'] Rake::Task['db:migrate'] to change the database connection instead of changing environment but, the db:create and db:migrate will still run under "development" database, though the linked post said it should run for "custom" database... weird

    Read the article

  • How can I round money values to the nearest $5.00 interval?

    - by Frank Developer
    I have an Informix-SQL based Pawnshop app which calculates an estimate of how much money should be loaned to a customer, based on the weight and purity of gold. The minimum the pawnshop lends is $5.00. The pawnshop employee will typically lend amounts which either ends with a 5 or 0. examples: 10, 15, 20, 100, 110, 125, etc. They do this so as to not run into shortage problems with $1.00 bills. So, if for example my system calculates the loan should be: $12.49, then round it to $10, $12.50 to $15.00, $13.00 to $15.00, $17.50 to $20.00, and so on!..The employee can always override the rounded amount if necessary. Is it possible to accomplish this within the instructions section of a perform screen or would I have to write a cfunc and call it from within perform?.. Are there any C library functions which perform interval rounding of money values?.. On another note, I think the U.S. Government should discontinue the use of pennies so that businesses can round amounts to the nearest nickel, it would save so much time and weight in our pockets!

    Read the article

  • Is it immoral to write crappy code even if readability and correctness is not a requirement?

    - by mafutrct
    There are cases when crappy (i.e. unreadable and buggy) code is not much of a problem. For instance, imagine you need to generate a big text file that mostly follows a simple pattern with a few very complex exceptions. What do you do? You quickly write a simple algorithm and insert the exceptional bits in the output manually to save 4 hours. The code is unreadable, and the output is flawed, but it's still the correct way since it is way faster. But let's get this straight: I hate bad code. I've had to read and work with code that caused my stomach to hurt. I care a lot about good code. And actually, I caught myself thinking that it is immoral to write bad code even though the dirty approach is sometimes superior. I was surprised by myself and found my idea to be very irrational. Did you ever experience this? Should I just get rid of this stupid idea and use the most efficient approach to coding?

    Read the article

  • What is your workflow when designing HTML/CSS layouts?

    - by DMin
    I have been working with PHP/MySQL as a hobby for close to a couple of years now, I have been working with photoshop for a very long time, I know CSS & HTML well enough to write without any reference, so, I would not consider myself someone who's very new at this. I have recently started developing websites professionally - (only person working on the project). I have seen the power of Joomla and how you can make a website ready for your customer in a matter of hours(if not minutes). I find it very hard to make layouts that remotely look like the themes on joomla. I find making even simple layouts a very cumbersome process and takes a lot of time to get a good enough output. I have a feeling I may not be using the right tools or workflow for the job. What I wanted to findout was, as part of the industry : How do, you, make your website when you do it from scratch? What are the tools that you use? What is your workflow? Just noted a few things I know already, for your reference(You can skip this if you like) I have seen the export for web for Photoshop that exports CSS - but (as far as I know) exports only absolutely positioned webpages so they need to be beaten and fixed if you want to use them for example for joomla. I have used the SiteGrinder plugin for Photoshop that exports HTML/CSS. It looks promising but haven't tried it extensively. One of the tools that save loads of time is FireBug. This makes it easy to edit html and css on the fly and get the page looking exactly as you want it. Recently stumbled upon fireworks. But haven't explored it much. Thanks! :)

    Read the article

  • What is the best testing pattern for checking that parameters are being used properly?

    - by Joseph
    I'm using Rhino Mocks to try to verify that when I call a certain method, that the method in turn will properly group items and then call another method. Something like this: //Arrange var bucketsOfFun = new BucketGame(); var balls = new List<IBall> { new Ball { Color = Color.Red }, new Ball { Color = Color.Blue }, new Ball { Color = Color.Yellow }, new Ball { Color = Color.Orange }, new Ball { Color = Color.Orange } }; //Act bucketsOfFun.HaveFunWithBucketsAndBalls(balls); //Assert ??? Here is where the trouble begins for me. My method is doing something like this: public void HaveFunWithBucketsAndBalls(IList<IBall> balls) { //group all the balls together according to color var blueBalls = GetBlueBalls(balls); var redBalls = GetRedBalls(balls); // you get the idea HaveFunWithABucketOfBalls(blueBalls); HaveFunWithABucketOfBalls(redBalls); // etc etc with all the different colors } public void HaveFunWithABucketOfBalls(IList<IBall> colorSpecificBalls) { //doing some stuff here that i don't care about //for the test i'm writing right now } What I want to assert is that each time I call HaveFunWithABucketOfBalls that I'm calling it with a group of 1 red ball, then 1 blue ball, then 1 yellow ball, then 2 orange balls. If I can assert that behavior then I can verify that the method is doing what I want it to do, which is grouping the balls properly. Any ideas of what the best testing pattern for this would be?

    Read the article

  • Ultrawingrid - how to display #1/1/1800# as blank ( as if null )

    - by Charles Hankey
    Ultrawingrid 9.2 VS2008 .net 3.5 My wingrid uses a bindingsource. All datetimes which are null in SQL Server are delivered to the bindingsource as #1/1/1800# I would like Ultrawingrid to display this date as blank as it would a null from source. Also, if the date is null in the grid ( i.e. blanked out ) I would like to update the data source to the date #1/1/1800# ( the framework takes care of getting that date back into the backend as a null ) This seems like it should be a trivial matter but I can find no documentation on just where to intervene so the grid will see a particular date as a null and save a null as a particular date. This is the direction I've been headed but I don't think either is the right place and I can't even get the syntax to work in the BeforeRowUpdate as I cannot see how to set a value that is passed to the data binding without setting the value of control itself, which I think has to remain null in order to display as blank Private Sub ugPropMaster_BeforeRowUpdate(ByVal sender As Object, ByVal e As _ Infragistics.Win.UltraWinGrid.CancelableRowEventArgs) Handles _ ugPropMaster.BeforeRowUpdate If e.Row.Cells.Item("Exdate").Value Is Nothing Then e.Row.Cells("Exdate").Value = CDate(#1/1/1800#) End If End Sub Private Sub ugPropMaster_InitializeRow(ByVal sender As Object, ByVal e As _ Infragistics.Win.UltraWinGrid.InitializeRowEventArgs) Handles _ ugPropMaster.InitializeRow If CDate(e.Row.Cells.Item("Exdate").Value) = CDate(#1/1/1800#) Then e.Row.Cells.Item("Exdate").Value = Nothing End If End Sub Guidance much appreciated

    Read the article

  • Execute javascript on IIS server

    - by James Westgate
    I have the following situation. A customer uses JavaScript with jQuery to create a complex website. We would like to use JavaScript and jQuery on the server (IIS) for the following reasons: Skills transfer - we would like to use JavaScript and jQuery on the server and not have to use eg VB Script. / classic asp. .Net framework/Java etc is ruled out because of this. Improved options for search/accessibility. We would like to be able to use jQuery as a templating system, but this isn't viable for search engines and users with js turned off - unless we can selectively run this code on the server. There is significant investment in IIS and Windows Server, so changing that is not an option. I know you can run jScript on IIS using windows Script host, but am unsure of the scalability and the process surrounding this. I am also unsure whether this would have access to the DOM. Here is a diagram that hopefully explains the situation. I was wondering if anyone has done anything similar?

    Read the article

  • Insert multiple line breaks into a JavaScript string (regex) (CodeMirror)

    - by PJH
    I have a few strings and I would like to insert some line breaks into them at certain points. I figured out a few of the logistics but as a whole I can't seem to crack this problem, probably because I have limited experience with regex. Basically I have a long string of XML tags that is all on one line. I want to add line breaks at certain points to get the data more formatted and looking nice. I am using CodeMirror to display this data on a webpage but for some reason its all on line #1. So I need to go from something like this: <Sample><Name></Name><PhoneNumber><AreaCode></AreaCode><Number></Number></PhoneNumber></Sample> To something like this: <Sample> <Name></Name> <PhoneNumber> <AreaCode></AreaCode> <Number></Number> </PhoneNumber> </Sample> CodeMirror will take care of the rest of the formatting all I need to do is insert the line breaks in the right spot using regex or a loop of some sort. The Tags will or can change so I am guessing regex has to be used. I have had success inserting line breaks with \n and &#xD but can't seem to get regex to detect the proper locations. Any help would be greatly appreciated. Thanks. UPDATE I overlooked this but the brackets are in fact being sent as < and > So example tag would look like: &lt;PhoneNumber&gt; or &lt;/PhoneNumber&gt; So basically need to insert a \n after every &gt; that is a closing tag or a beginning tag that contains children tags.

    Read the article

  • DIVS over flash movies in Internet Explorer

    - by drew
    The age old question... why the hell doesn't a div positioned over a flash object stay on top with z-index. I have found the answer in the past, but it's been so long, I can't seem to get it. My flash movie is in a div floating left: <div id="flash"> <object width="614" height="289"> <param name="movie" value="images/75.swf"> <param name="wmode" value="transparent"> <embed src="images/75.swf" width="614" height="289" wmode"transparent"> </embed> </object> </div> My css for the div that needs to be on top is: .menu ul li:hover ul li a:hover { background:#5a3f2d; color:#FFF; z-index: 9999; I cannot get it to show above the flash movie in ie6 or ie8. I know this is old school but I'm frustrated! Does my nav div need to have an absolute position? Is that why it doesn't work? Example is here. Hover over the first link on the right: "CUSTOMER SERVICE" Thanks all :)

    Read the article

  • Simulating O_NOFOLLOW (2): Is this other approach safe?

    - by Daniel Trebbien
    As a follow-up question to this one, I thought of another approach which builds off of @caf's answer for the case where I want to append to file name and create it if it does not exist. Here is what I came up with: Create a temporary directory with mode 0700 in a system temporary directory on the same filesystem as file name. Create an empty, temporary, regular file (temp_name) in the temporary directory (only serves as placeholder). Open file name for reading only, just to create it if it does not exist. The OS may follow name if it is a symbolic link; I don't care at this point. Make a hard link to name at temp_name (overwriting the placeholder file). If the link call fails, then exit. (Maybe someone has come along and removed the file at name, who knows?) Use lstat on temp_name (now a hard link). If S_ISLNK(lst.st_mode), then exit. open temp_name for writing, append (O_WRONLY | O_APPEND). Write everything out. Close the file descriptor. unlink the hard link. Remove the temporary directory. (All of this, by the way, is for an open source project that I am working on. You can view the source of my implementation of this approach here.) Is this procedure safe against symbolic link attacks? For example, is it possible for a malicious process to ensure that the inode for name represents a regular file for the duration of the lstat check, then make the inode a symbolic link with the temp_name hard link now pointing to the new, symbolic link? I am assuming that a malicious process cannot affect temp_name.

    Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >