Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 301/330 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

• Unable to either locate any wireless networks nor even connect to wifi

  - by Leo Chan

  I'm new to Linux. I currently have installed ubuntu 12.10. I had a previous problem with my wireless card (see url to see previous problem : How to enable wireless in a Fujitsu LH532?). It now shows Connect to hidden network and create new wireless network but now unfortunately it simply cannot find any wireless connections. I did have a very thorough look around about this problem such as wait a little longer since sometimes it cannot load all the wireless connections available that quickly. My wifi is a hidden network and I have used the connect to hidden network feature but it keeps asking for my wep key which has been checked 4 times (I counted) and it still seems to not work; It keeps asking for the WEP key. I did try both WEP 40/128-bit key and WPA & WPA2 since previously on my windows it worked; My family later decided to use WEP. I only have a quick fix using a usb wireless stick and I wish to have a more solid fix. Thanks Results from sudo iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:1E:73:C8:62:BD Channel:6 Frequency:2.437 GHz (Channel 6) Quality=25/70 Signal level=-85 dBm Encryption key:on ESSID:"EnigmaHome" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bb10a5c Extra: Last beacon: 696ms ago IE: Unknown: 000A456E69676D61486F6D65 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 Cell 02 - Address: C8:3A:35:34:C1:60 Channel:6 Frequency:2.437 GHz (Channel 6) Quality=22/70 Signal level=-88 dBm Encryption key:on ESSID:"Tenda" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000001336e70ffdd Extra: Last beacon: 716ms ago IE: Unknown: 000554656E6461 IE: Unknown: 010882848B961224486C IE: Unknown: 030106 IE: Unknown: 32040C183060 IE: Unknown: 0706434E20010D10 IE: Unknown: 33082001020304050607 IE: Unknown: 33082105060708090A0B IE: Unknown: DD270050F204104A0001101044000101104700102880288028801880A880C83A3534C160103C000101 IE: Unknown: 050400010000 IE: Unknown: 2A0106 IE: Unknown: 2D1AEC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: 3D1606000500000000000000000000000000000000000000 IE: Unknown: 7F0101 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Preauthentication Supported IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 IE: Unknown: 0B05010089127A IE: Unknown: DD1E00904C33EC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: DD1A00904C3406000500000000000000000000000000000000000000 IE: Unknown: DD07000C4304000000 Cell 03 - Address: 00:1E:73:C8:62:BF Channel:6 Frequency:2.437 GHz (Channel 6) Quality=47/70 Signal level=-63 dBm Encryption key:on ESSID:"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bac614e Extra: Last beacon: 1064ms ago IE: Unknown: 00110000000000000000000000000000000000 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 050C010200000000000000000000 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD070050F202000100

  Read the article

• Using 3G/UMTS in Mauritius

  After some conversation, threads in online forum and mailing lists I thought about writing this article on how to setup, configure and use 3G/UMTS connections on Linux here in Mauritius. Personally, I can only share my experience with Emtel Ltd. but try to give some clues about how to configure Orange as well. Emtel 3G/UMTS surf stick Emtel provides different surf sticks from Huawei. Back in 2007, I started with an E220 that wouldn't run on Windows Vista either. Nowadays, you just plug in the surf stick (ie. E169) and usually the Network Manager will detect the new broadband modem. Nothing to worry about. The Linux Network Manager even provides a connection profile for Emtel here in Mauritius and establishing the Internet connection is done in less than 2 minutes... even quicker. Using wvdial Old-fashioned Linux users might not take Network Manager into consideration but feel comfortable with wvdial. Although that wvdial is primarily used with serial port attached modems, it can operate on USB ports as well. Following is my configuration from /etc/wvdial.conf: [Dialer Defaults]Phone = *99#Username = emtelPassword = emtelNew PPPD = yesStupid Mode = 1Dial Command = ATDT[Dialer emtel]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","web"ISDN = 0Modem Type = Analog Modem The values of user name and password are optional and can be configured as you like. In case that your SIM card is protected by a pin - which is highly advised, you might another dialer section in your configuration file like so: [Dialer pin]Modem = /dev/ttyUSB0Init1 = AT+CPIN=0000 This way you can "daisy-chain" your command to establish your Internet connection like so: wvdial pin emtel And it works auto-magically. Depending on your group assignments (dialout), you might have to sudo the wvdial statement like so: sudo wvdial pin emtel Orange parameters As far as I could figure out without really testing it myself, it is also necessary to set the Access Point (AP) manually with Orange. Well, although it is pretty obvious a lot of people seem to struggle. The AP value is "orange". [Dialer orange]Modem = /dev/ttyUSB0Baud = 3774000Init2 = ATZInit3 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0Init4 = AT+cgdcont=1,"ip","orange"ISDN = 0Modem Type = Analog Modem And you are done. Official Linux support from providers It's just simple: Forget it! The people at the Emtel call center are completely focused on the hardware and Mobile Connect software application provided by Huawei and are totally lost in case that you confront them with other constellations. For example, my wife's netbook has an integrated 3G/UMTS modem from Ericsson. Therefore, no need to use the Huawei surf stick at all and of course we use the existing software named Wireless Manager instead of. Now, imagine to mention at the help desk: "Ehm, sorry but what's Mobile Connect?" And Linux after all might give the call operator sleepless nights... Who knows? Anyways, I hope that my article and configuration could give you a helping hand and that you will be able to connect your Linux box with 3G/UMTS surf sticks here in Mauritius.

  Read the article

• How do you use blog content?

  - by fatherjack

  Do you write a blog, have you ever thought about it? I think people fall into one of a few categories when it comes to blogs, especially blogs with technical content. Writing articles furiously - daily, twice daily and reading dozens of others. Writing the odd piece of content and read plenty of others' output. Started a blog once and its fizzled out but reading lots. Thought about starting a blog someday but never got around to it, hopping into the occasional blog when a link or a Tweet takes them there. Never thought about writing one but often catching content from them when Google (or other preferred search engine) finds content related to their search. Now I am not saying that either of these is right or wrong, nor am I saying that anyone should feel any compulsion to be in any particular category. What I would say is that you as a blog reader have the power to move blog writers from one category to another. How, you might ask? How do I have any power over a blog writer? It is very simple - feedback. If you give feedback then the blog writer knows that they are reaching an audience, if there is no response then they we are simply writing down our thoughts for what could amount to nothing more than a feeble amount of exercise and a few more key stokes towards the onset of RSI. Most blogs have a mechanism to alert the writer when there are comments, and personally speaking, if an email is received saying there has been a response to a blog article then there is a rush of enthusiasm, a moment of excitement that someone is actually reading and considering the text that was submitted and made available for the whole world to read. I am relatively new to this blog game and could be in some extended honeymoon period as I have also recently been incorporated into the Simple Talk 'stable'. I can understand that once you get to the "Dizzy Heights of Ozar" (www.brentozar.com) then getting comments and feedback might not be such a pleasure and may even be rather more of a chore but that, I guess, is the price of fame. For us mere mortals starting out blogging, getting feedback (or even at the moment for me, simply the hope of getting feedback) is what keeps it going. The hope that you will pick a topic that hasn't been done recently by Brad McGehee, Grant Fritchey,  Paul Randall, Thomas LaRock or any one of the dozen of rock star bloggers listed here or others from SQLServerPedia and so on, and then do it well enough to be found, reviewed, or <shudder> (re)tweeted to bring more visitors is what we are striving for, along with the fact that the content we might produce is something that will be of benefit to others. There is only so much point to typing content that no-one is reading and putting it on a blog. You may as well just write it in a diary. A technical blog is not like, say, a blog covering photography techniques where the way to frame and take a picture stands true whether it was written last week, last year or last century - technical content goes sour, quite quickly. There isn't much call for articles about yesterdays technology unless its something that still applies to current versions too, so some content written no more than 2 years ago isn't worth having now. The combination of a piece of content that you know is going to not last long and the fact that no-one reads it is a strong force against writing anything else. Getting feedback counters that despair and gives a value to writing something new. I would say that any feedback is good but there are obviously comments that are just so negative or otherwise badly phrased that they would hasten the demise of a blog but, in general most feedback will encourage a writer. It may not be a comment that supports or agrees with the main theme of a post but if it generates discussion or opens up a previously unexplored viewpoint it is contributing to the blog and is therefore encouraging to the writer. Even if you only say "thank you" before you leave a blog, having taken a section of script to use for yourself or having been given a few links to some content that has widened your knowledge it will be so welcome to the blog owner. Isn't it also the decent thing to do, acknowledging that you have benefited from another's efforts?

  Read the article

• DVD not detected?

  - by Benjamin

  As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

  Read the article

• Center Pictures and Other Objects in Office 2007 & 2010

  - by Matthew Guay

  Sometimes it can be difficult to center a picture in a document just by dragging it dragging it around. Today we show you how to center pictures, images, and other objects perfectly in Word and PowerPoint. Note: For this tutorial we’re using Office 2010, but the steps are nearly identical in 2007. Centering a Picture in Word First let’s insert a picture into our document.  Click the Insert tab, and then click Picture. Once you select the picture you want, it will be added to your document.  Usually, pictures are added wherever your curser was in the document, so in a blank document it will be added at the top left. Also notice Picture Tools show up in the Ribbon after inserting an image. Note: The following menu items are available in Picture Tools Format tab which is displayed when you select the object or image you’re working with. How do we align the picture just like we want?  Click Position to get some quick placement options, including centered in the middle of the document or on the top.    However, for more advanced placement, we can use the Align tool.  If Word isn’t maximized, you may only see the icon without the “Align” label. Notice the tools were grayed out in the menu by default.  To be able to change the Alignment, we need to first change the text wrap settings. Click the Wrap Text button, and any option other than “In Line with Text”.  Your choice will depend on the document you’re writing, just choose the option that works best in the document.   Now, select the Align tools again.  You can now position your image precisely with these options. Align Center will position your picture in the center of the page widthwise. Align Middle will put the picture in the middle of the page height-wise. This works the same with textboxes.  Simply click the Align button in the Format tab, and you can center it in the page. And if you’d like to align several objects together, simply select them all, click Group, and then select Group from the menu.   Now, in the align tools, you can center the whole group on your page for a heading, or whatever you want to use the pictures for. These steps also work the same with Office 2007. Center objects in PowerPoint This works similar in PowerPoint, except that pictures are automatically set for square wrapping automatically, so you don’t have to change anything.  Simply insert the picture or other object of your choice, click Align, and choose the option you want. Additionally, if one object is already aligned like you want, drag another object near it and you will see a Smart Guide to help you align or center the second object with the first.  This only works with shapes in PowerPoint 2010 beta, but will work with pictures, textboxes, and media in the final release this summer. Conclusion These are good methods for centering images and objects in Word and PowerPoint.  From designing perfect headers to emphasizing your message in a PowerPoint presentation, this is something we’ve found useful and hope you will too. Since we’re talking about Office here, it’s worth mentioning that Microsoft has announced the Technology Guarantee Program for Office 2010. Essentially what this means is, if you purchase a version of Office 2007 between March 5th and September 30th of this year, when Office 2010 is released you’ll be able to upgrade to it for free! Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteAdd More Functions To Office 2007 By Installing Add-InsCustomize Your Welcome Picture Choices in Windows VistaEasily Rotate Pictures In Word 2007Add Effects To Your Pictures in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox)

  Read the article

• Installing CUDA on Ubuntu 12.04 with nvidia driver 295.59

  - by johnmcd

  I have been trying to get cuda to run on a nvidia gt 650m based laptop. I am running Ubuntu 12.04 with the nvidia 295.59 driver. Also, my laptop uses Optimus so I have install the driver via bumblebee. Bumblebee is not working correctly yet -- however I believe it is possible to install CUDA independently. To install CUDA I have followed the instructions detailed here: How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? However I am still running into problem building the sdk. I made the changes specified at the above link in common.mk, but I got the following (snippet) from the build process: make[2]: Entering directory `/home/john/NVIDIA_GPU_Computing_SDK/C/src/fluidsGL' /usr/bin/ld: warning: libnvidia-tls.so.302.17, needed by /usr/lib/nvidia-current/libGL.so, not found (try using -rpath or -rpath-link) /usr/bin/ld: warning: libnvidia-glcore.so.302.17, needed by /usr/lib/nvidia-current/libGL.so, not found (try using -rpath or -rpath-link) /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv018tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv012glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv017glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv012tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv015tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv019tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv000glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv017tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv013tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv013glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv018glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv022tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv007tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv009tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv020tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv014glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv015glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv016tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv001glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv006tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv021tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv011tls' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv020glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv019glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv002glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv021glcore' /usr/lib/nvidia-current/libGL.so: undefined reference to `_nv014tls' collect2: ld returned 1 exit status make[2]: *** [../../bin/linux/release/fluidsGL] Error 1 make[2]: Leaving directory `/home/john/NVIDIA_GPU_Computing_SDK/C/src/fluidsGL' make[1]: *** [src/fluidsGL/Makefile.ph_build] Error 2 make[1]: Leaving directory `/home/john/NVIDIA_GPU_Computing_SDK/C' make: *** [all] Error 2 The libraries that ld warns about are on my system and are installed on the system: $ locate libnvidia-tls.so.302.17 libnvidia-glcore.so.302.17 /usr/lib/nvidia-current/libnvidia-glcore.so.302.17 /usr/lib/nvidia-current/libnvidia-tls.so.302.17 /usr/lib/nvidia-current/tls/libnvidia-tls.so.302.17 /usr/lib32/nvidia-current/libnvidia-glcore.so.302.17 /usr/lib32/nvidia-current/libnvidia-tls.so.302.17 /usr/lib32/nvidia-current/tls/libnvidia-tls.so.302.17 however /usr/lib/nvidia-current and /usr/lib32/nvidia-current are not being picked up by ldconfig. I have tried adding them by adding a file to /etc/ld.so.conf.d/ which gets past this error, however now I am getting the following error: make[2]: Entering directory `/home/john/NVIDIA_GPU_Computing_SDK/C/src/deviceQueryDrv' cc1plus: warning: command line option ‘-Wimplicit’ is valid for C/ObjC but not for C++ [enabled by default] obj/x86_64/release/deviceQueryDrv.cpp.o: In function `main': deviceQueryDrv.cpp:(.text.startup+0x5f): undefined reference to `cuInit' deviceQueryDrv.cpp:(.text.startup+0x99): undefined reference to `cuDeviceGetCount' deviceQueryDrv.cpp:(.text.startup+0x10b): undefined reference to `cuDeviceComputeCapability' deviceQueryDrv.cpp:(.text.startup+0x127): undefined reference to `cuDeviceGetName' deviceQueryDrv.cpp:(.text.startup+0x16a): undefined reference to `cuDriverGetVersion' deviceQueryDrv.cpp:(.text.startup+0x1f0): undefined reference to `cuDeviceTotalMem_v2' deviceQueryDrv.cpp:(.text.startup+0x262): undefined reference to `cuDeviceGetAttribute' deviceQueryDrv.cpp:(.text.startup+0x457): undefined reference to `cuDeviceGetAttribute' deviceQueryDrv.cpp:(.text.startup+0x4bc): undefined reference to `cuDeviceGetAttribute' deviceQueryDrv.cpp:(.text.startup+0x502): undefined reference to `cuDeviceGetAttribute' deviceQueryDrv.cpp:(.text.startup+0x533): undefined reference to `cuDeviceGetAttribute' obj/x86_64/release/deviceQueryDrv.cpp.o:deviceQueryDrv.cpp:(.text.startup+0x55e): more undefined references to `cuDeviceGetAttribute' follow collect2: ld returned 1 exit status make[2]: *** [../../bin/linux/release/deviceQueryDrv] Error 1 make[2]: Leaving directory `/home/john/NVIDIA_GPU_Computing_SDK/C/src/deviceQueryDrv' make[1]: *** [src/deviceQueryDrv/Makefile.ph_build] Error 2 make[1]: Leaving directory `/home/john/NVIDIA_GPU_Computing_SDK/C' make: *** [all] Error 2 I would appreciate any help that anyone can provide me with. If I can provide any further information please let me know. Thanks.

  Read the article

• Is Linear Tape File System (LTFS) Best For Transportable Storage?

  - by rickramsey

  Those of us in tape storage engineering take a lot of pride in what we do, but understand that tape is the right answer to a storage problem only some of the time. And, unfortunately for a storage medium with such a long history, it has built up a few preconceived notions that are no longer valid. When I hear customers debate whether to implement tape vs. disk, one of the common strikes against tape is its perceived lack of usability. If you could go back a few generations of corporate acquisitions, you would discover that StorageTek engineers recognized this problem and started developing a solution where a tape drive could look just like a memory stick to a user. The goal was to not have to care about where files were on the cartridge, but to simply see the list of files that were on the tape, and click on them to open them up. Eventually, our friends in tape over at IBM built upon our work at StorageTek and Sun Microsystems and released the Linear Tape File System (LTFS) feature for the current LTO5 generation of tape drives as an open specification. LTFS is really a wonderful feature and we’re proud to have taken part in its beginnings and, as you’ll soon read, its future. Today we offer LTFS-Open Edition, which is free for you to use in your in Oracle Enterprise Linux 5.5 environment - not only on your LTO5 drives, but also on your Oracle StorageTek T10000C drives. You can download it free from Oracle and try it out. LTFS does exactly what its forefathers imagined. Now you can see immediately which files are on a cartridge. LTFS does this by splitting a cartridge into two partitions. The first holds all of the necessary metadata to create a directory structure for you to easily view the contents of the cartridge. The second partition holds all of the files themselves. When tape media is loaded onto a drive, a complete file system image is presented to the user. Adding files to a cartridge can be as simple as a drag-and-drop just as you do today on your laptop when transferring files from your hard drive to a thumb drive or with standard POSIX file operations. You may be thinking all of this sounds nice, but asking, “when will I actually use it?” As I mentioned at the beginning, tape is not the right solution all of the time. However, if you ever need to physically move data between locations, tape storage with LTFS should be your most cost-effective and reliable answer. I will give you a few use cases examples of when LTFS can be utilized. Media and Entertainment (M&E), Oil and Gas (O&G), and other industries have a strong need for their storage to be transportable. For example, an O&G company hunting for new oil deposits in remote locations takes very large underground seismic images which need to be shipped back to a central data center. M&E operations conduct similar activities when shooting video for productions. M&E companies also often transfers files to third-parties for editing and other activities. These companies have three highly flawed options for transporting data: electronic transfer, disk storage transport, or tape storage transport. The first option, electronic transfer, is impractical because of the expense of the bandwidth required to transfer multi-terabyte files reliably and efficiently. If there’s one place that has bandwidth, it’s your local post office so many companies revert to physically shipping storage media. Typically, M&E companies rely on transporting disk storage between sites even though it, too, is expensive. Tape storage should be the preferred format because as IDC points out, “Tape is more suitable for physical transportation of large amounts of data as it is less vulnerable to mechanical damage during transportation compared with disk" (See note 1, below). However, tape storage has not been used in the past because of the restrictions created by proprietary formats. A tape may only be readable if both the sender and receiver have the same proprietary application used to write the file. In addition, the workflows may be slowed by the need to read the entire tape cartridge during recall. LTFS solves both of these problems, clearing the way for tape to become the standard platform for transferring large files. LTFS is open and, as long as you’ve downloaded the free reader from our website or that of anyone in the LTO consortium, you can read the data. So if a movie studio ships a scene to a third-party partner to add, for example, sounds effects or a music score, it doesn’t have to care what technology the third-party has. If it’s written back to an LTFS-formatted tape cartridge, it can be read. Some tape vendors like to claim LTFS is a “standard,” but beauty is in the eye of the beholder. It’s a specification at this point, not a standard. That said, we’re already seeing application vendors create functionality to write in an LTFS format based on the specification. And it’s my belief that both customers and the tape storage industry will see the most benefit if we all follow the same path. As such, we have volunteered to lead the way in making LTFS a standard first with the Storage Network Industry Association (SNIA), and eventually through to standard bodies such as American National Standards Institute (ANSI). Expect to hear good news soon about our efforts. So, if storage transportability is one of your requirements, I recommend giving LTFS a look. It makes tape much more user-friendly and it’s free, which allows tape to maintain all of its cost advantages over disk! Note 1 - IDC Report. April, 2011. “IDC’s Archival Storage Solutions Taxonomy, 2011” - Brian Zents Website Newsletter Facebook Twitter

  Read the article

• How to Create and Manage Contact Groups in Outlook 2010

  - by Mysticgeek

  If you find you’re sending emails to the same people all the time during the day, it’s tedious entering in their addresses individually. Today we take a look at creating Contact Groups to make the process a lot easier. Create Contact Groups Open Outlook and click on New Items \ More Items \ Contact Group. This opens the Contract Group window. Give your group a name, click on Add Members, and select the people you want to add from your Outlook Contacts, Address Book, or Create new ones. If you select from your address book you can scroll through and add the contacts you want. If you have a large amount of contacts you might want to search for them or use Advanced Find. If you want to add a new email contact to your group, you’ll just need to enter in their display name and email address then click OK. If you want the new member added to your Contacts list then make sure Add to Contacts is checked. After you have the contacts you want in the group, click Save & Close. Now when you compose a message you should be able to type in the name of the Contact Group you created… If you want to make sure you have everyone included in the group, click on the plus icon to expand the contacts. You will get a dialog box telling you the members of the group will be shown and you cannot collapse it again. Check the box not to see the message again then click OK. Then the members of the group will appear in the To field. Of course you can enter a Contact Group into the CC or Bcc fields as well. Add or Remove Members to a Contact Group After expanding the group you might notice some contacts aren’t included, or there is an old contact you don’t want to be in the group anymore. Click on the To button… Right-click on the Contact Group and select Properties. Now you can go ahead and Add Members… Or highlight a member and remove them…when finished click Save & Close. If you need to send emails to several of the same people, creating Contact Groups is a great way to save time by not entering them individually. If you work in for a large company, creating Contact Groups by department is a must! Similar Articles Productive Geek Tips Schedule Auto Send & Receive in Microsoft OutlookCreate An Electronic Business Card In Outlook 2007Create an Email Template in Outlook 2003Clear the Auto-Complete Email Address Cache in OutlookGet Maps and Directions to Your Contacts in Outlook 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• Oracle Social Network and the Flying Monkey Smart Target

  - by kellsey.ruppel

  Originally posted by Jake Kuramoto on The Apps Lab blog. I teased this before OpenWorld, and for those of you who didn’t make it to the show or didn’t come by the Office Hours to take the Oracle Social Network Technical Tour Noel (@noelportugal) ran, I give you the Flying Monkey Smart Target. In brief, Noel built a target, about two feet tall, which when struck, played monkey sounds and posted a comment to an Oracle Social Network Conversation, all controlled by a Raspberry Pi. He also connected a Dropcam to record the winner just prior to the strike. I’m not sure how it all works, but maybe Noel can post the technical specifics. Here’s Noel describing the Challenge, the Target and a few other tidbit in an interview with Friend of the ‘Lab, Bob Rhubart (@brhubart). The monkey target bits are 2:12-2:54 if you’re into brevity, but watch the whole thing. Here are some screen grabs from the Oracle Social Network Conversation, including the Conversation itself, where you can see all the strikes documented, the picture captured, and the annotation capabilities: #gallery-1 { margin: auto;? } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; }    That’s Diego in one shot, looking very focused, and Ernst in the other, who kindly annotated himself, two of the development team members. You might have seen them in the Oracle Social Network Hands-On Lab during the show. There’s a trend here. Not by accident, fun stuff like this has becoming our calling card, e.g. the Kscope 12 WebCenter Rock ‘em Sock ‘em Robots. Not only are these entertaining demonstrations, but they showcase what’s possible with RESTful APIs and get developers noodling on how easy it is to connect real objects to cloud services to fix pain points. I spoke to some great folks from the City of Atlanta about extending the concepts of the flying monkey target to physical asset monitoring. Just take an internet-connected camera with REST APIs like the Dropcam, wire it up to Oracle Social Netwok, and you can hack together a monitoring device for a datacenter or a warehouse. Sure, it’s easier said than done, but we’re a lot closer to that reality than we were even two years ago. Another noteworthy bit from Noel’s interview, beginning at 2:55, is the evolution of social developer. Speaking of, make sure to check out the Oracle Social Developer Community. Look for more on the social developer in the coming months. Noel has become quite the Raspberry Pi evangelist, and why not, it’s a great tool, a low-power Linux machine, cheap ($35!) and highly extensible, perfect for makers and students alike. He attended a meetup on Saturday before OpenWorld, and during the show, I heard him evangelizing the Pi and its capabilities to many people. There is some fantastic innovation forming in that ecosystem, much of it with Java. The OTN gang raffled off five Pis, and I expect to see lots of great stuff in the very near future. Stay tuned this week for posts on all our Challenge entrants. There’s some great innovation you won’t want to miss. Find the comments. Update: I forgot to mention that Noel used Twilio, one of his favorite services, during the show to send out Challenge updates and information to all the contestants.

  Read the article

• Revisioning the CeBIT 2011

  - by hechtsuppe

  Hey guys, I am living in the CeBIT's hometown, the beautiful city Hanover. So I am visiting this exhibition since 2002 and I've seen a lot of changes during all this time. But this time, it was the most boring fair I've ever seen. Lets start with the first halls: "The same procedure as every year"- directly behind the entrance are the exhibitioners from far east (China, Taiwan...). In the past, they've shown a lot of nice toys. But this time, they got very serious, the only great gimmick was the motorcycle suitcase for the iPad, I watched the presentation until I reminded myself that I am not owning an iPad and these cases weren't suitable for my BMW motorcycle. So I started looking for the business stuff (I was there for business). I walked deeper in the exhibition area: During the way to the business halls, I came across a hall where I heard a big bass- the gamer's hall I think so I made a quick getaway from there. I saw a lot of teenagers with gaming bags on thier shoulders and I was really confused. I thought 'Damn it is tuesday 11:00 am, the trade fair is opened for public on saturday, why they are here and not at school?'. So the german schools seem to be too easy for students. At the time I was a pupil I visited the CeBIT on saturday! At the business halls: I visited IBM's booth but there were only guys looking like penguins and I weared a white chemise. So nobody was interested in talking to me. At the coffeebar I met a very nice guy from Bangladesh I think he was round about 25, but he told me that he was the first time in germany and he thought that germans are still nazis. I laughed at him and went to DELL. I was really really really interested in client solutions from DELL because I want to get away from our current client manufacturer. At the DELL booth I became recognized and a really nice guy told me where to use which client products. But there were too many people for trying the notebooks so the DELL guy asked for my business card. But I am still waiting for information, dear 'DELL dude'. I went to the Microsoft booth for informing myself about new IT trends. There were nothig new, only a few presentations about the 'new' Windows Live, Windows Phone 7 and 'the allmighty cloud'. But there was a very small presentation corner with the title 'geeks corner'. A guy inside the 'geeks corner' started Visual Studio 2010, I was really agog for the presentation. But then he started talking about Windows Phone 7 and how to program. He began with drag'n drop a textbox and a button on the form. He wrote really basic code and explained the functionality of a textbox- then I stood up and left the room. At the end: Before leaving the fairground, I've visited a few small booths and the big anti-virus program companies. But there was nothing new, I was really disappointed  this year. I've seen only ten exhibition babes and the rest of the week I stood ~3 hours in traffic jams. But I really love the flair in the whole town during this exhibition. The people in the city railways, which are really confused and the people in the pubs. Cheers Vince

  Read the article

• mythbuntu 12 - lirc device doesn't appear to even exist

  - by FrustratedWithFormsDesigner

  I'm trying to get a new installation of Mythbuntu working. So far, everything is OK except the remote. The sensor for the remote is on my Hauppauge WinTV HVR 1250. First I tried to run irw to see what was being picked up by the sensor: $ irw connect: No such file or directory Then trying to run lircd gives: $ lircd start$ lircd start lircd: can't open or create /var/run/lirc/lircd.pid I look for any lirc devices and find there are none: $ ls /dev/li* ls: cannot access /dev/li*: No such file or directory Just to be sure, I check in /proc/bus/input/devices, which shows me two powerbuttons (not sure why), kbd and mouse dev, and the audio devs. Nothing for the IR receiver on the tuner card (which I thought was strange because shouldn't the tuner show up here?). $ cat /proc/bus/input/devices I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 U: Uniq= H: Handlers=kbd event1 B: PROP=0 B: EV=3 B: KEY=10000000000000 0 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input0 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input2 U: Uniq= H: Handlers=sysrq kbd event2 B: PROP=0 B: EV=120013 B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe B: MSC=10 B: LED=7 I: Bus=0003 Vendor=099a Product=7202 Version=0111 N: Name="Wireless Keyboard/Mouse" P: Phys=usb-0000:00:10.1-2/input1 S: Sysfs=/devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/input/input3 U: Uniq= H: Handlers=kbd mouse0 event3 B: PROP=0 B: EV=1f B: KEY=4837fff072ff32d bf54444600000000 70001 20c100b17c000 267bfad9415fed 9e168000004400 10000002 B: REL=143 B: ABS=100000000 B: MSC=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input4 U: Uniq= H: Handlers=event4 B: PROP=0 B: EV=21 B: SW=2000 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input5 U: Uniq= H: Handlers=event5 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Rear Mic" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input6 U: Uniq= H: Handlers=event6 B: PROP=0 B: EV=21 B: SW=10 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Front Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input7 U: Uniq= H: Handlers=event7 B: PROP=0 B: EV=21 B: SW=4 I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic Line-Out" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input8 U: Uniq= H: Handlers=event8 B: PROP=0 B: EV=21 B: SW=40 According to dmesg, the driver was registered, but it doesn't look like any devices was associated with the driver: $ dmesg | grep irc [ 10.631162] lirc_dev: IR Remote Control driver registered, major 249 So far, I've seen a number of forum pages suggesting that I use some trick to create a link between /dev/lirc and some other device that is the REAL IR sensor, like /dev/event5, but those cases assume that the real device is shown from /proc/bus/input/devices, and I don't see any such device there. Any suggestions on how to fix or further diagnose this?

  Read the article

• Ubuntu 12.04 Install - Black Screen - No Grub - Have run Boot Repair Disk

  - by Pat

  Day 4 of my purgatory. History: Had problems with live CD at first, had to set the "nomodeset" option ... and then it worked fine. Installed Ubuntu "Alongside" Windows XP from live CD (NOT wubi) Upon reboot after installation, I get the BIOS ... and then a black screen. If I hit shift after the BIOS screen I get text that says "loading GRUB ..", but then no GRUB ... just a black screen. What I have tried to do: Total re-installation ... 3 times now. Also tried with wubi, same black screen. Have gone back to the normal (non-wubi) install. After installation, I tried re-booting the live cd ... and trying to change GRUB file using: sudo gedit /etc/default/grub ... to "nomodeset" and "timeout=10" ... but won't let me save my changes because I'm using the live cd "in memory" system and don't have permissions to the disks (I think). I tried logging in ... but it won't let me. I then read many posts on this site. I'm stuck. This morning, I ran the "boot repair disk". Results here: http://paste.ubuntu.com/1132333/ What I think is wrong: Since I can get the live CD to run (perfectly) with the "nomodeset" option, I think all I need to do is get to GRUB to change that ... but I can't get to GRUB. Appreciate any advice. Pat Day 5 ... I downloaded "Super Grub 2 Disk" from: http://www.supergrubdisk.org/super-grub2-disk/ This looks promising. I can boot the disk and it brings me to a GRUB program that allows me to: 1) Boot to Windows ... which works 2) Boot to Ubuntu ... which does NOT work When I choose boot to Ubuntu, I get lines across the screen which is an obvious video card problem. Likely because I need to set the "nomodeset" option. So, I attempted to use super grub2 to edit the grub file ... but it is TOTALLY different than the Ubuntu grub file ... and I don't know where to put the "nomodeset" option. Still stuck ... The bottom line is that: 1) I need to edit /etc/default/grub on sda(1) ... which is my boot drive ... to add the "nomodeset" option 2) To do that I need to get into grub ... but, I can't. Holding down shift just echo's "loading grub .." and then takes me to a black screen 3) I can boot to the live CD by setting nomodeset .... but I cannot access the hard disk as root ... I can't save my changes! Can anyone tell me how to login as root for the filesystem from the live CD ... so I can edit the grub file on the HARD DISK ... and then run update-grub??

  Read the article

• Ubuntu 11.04 and 10.04 hang with black screen while installing from USB disk

  - by Bill

  I've been trying to install Ubuntu 11.04 from a USB flash stick and each time I try to boot from the USB key one of two things happen: A) The screen that asks you what you would like to do (e.g. run Ubuntu from the USB key or install it) shows up and the countdown to the default option starts to count down but as soon as I either touch the keyboard (sometimes I press enter or the arrow keys to select an option) or the countdown gets to zero the screen just locks up and nothing happens no matter how long I wait. B) When I boot from the USB key the screen will flicker for a second and then go black with a flashing white underscore at the top left corner of the screen. Again it doesn't matter how long I wait, nothing happens and pressing keys doesn't do a thing. The very first time I tried to install it I got a terminal-like screen that said something about a directory called 'casper' having an error of some sort. I have tried installing from USB using both 11.04 and 10.10. I'm about to try 10.04. I have read tons of forum posts about this but so far I haven't seen anything in the solutions that apply to me. My intention is to dual boot Windows 7 and Ubuntu. I must keep Windows as I am required to use Visual Studio for one of my college courses. Right now I'm using Wubi but I really want a full install. I can't use LVPM because it doesn't work with the version of Wubi I used. So now I'm thinking my best bet is to try to get a clean install working. I'd also convert Wubi to a full install too but there's no solution as far as I've read. So could someone tell me a reason why this is happening or if there's something I can do to get around the problem? I'm using a Gateway LT2802u netbook with and Intel Atom N455 processor, 1GB RAM, Intel Graphics Media Accelerator 3150 graphics card, and a 250GB HDD. I don't have anything on my current Wubi install that I can't replace so keep in mind when answering that I don't care if I lose my current settings and files from Wubi. Thanks everyone! UPDATE I just answered my own question so in case anyone else is having this same problem using similar hardware, do the following: When I first tried installing 11.04 I used the recommended universal installer tool to create the USB live/installation disk. That caused the original problem. Note that I had already downloaded the 11.04 ISO and did not use the included downloader from the USB creator. After that failed I used the same USB creator but had it download 10.10 for me. It also failed with the same issue. I repeated this process with unetbootin as well for both versions. Finally, I downloaded the Ubuntu 10.04 ISO and used the recommended USB creator once again. There was an error while creating the USB live install so I reformatted the USB key as FAT32 and tried again. It created the USB key. I then booted from the USB flash drive and selected "Install Ubuntu" (exact wording was different). It worked! It took me through the process that you see shown in pictures on the Ubuntu website. I let it create the appropriate partitions for me and it simply worked. I did get a few errors while the system tried to restart after it installed. It hung on a terminal-like screen but I pressed ENTER and it restarted. I booted into Windows 7, it checked the disks as it sensed that I messed with a partition, then it booted into Windows normally. Now I'm going to uninstall Wubi and update my new full install of Ubuntu! I'm excited to get the benefits of a full install now. So in the end, hopefully someone can learn from what I did.

  Read the article

• IBM "per core" comparisons for SPECjEnterprise2010

  - by jhenning

  I recently stumbled upon a blog entry from Roman Kharkovski (an IBM employee) comparing some SPECjEnterprise2010 results for IBM vs. Oracle. Mr. Kharkovski's blog claims that SPARC delivers half the transactions per core vs. POWER7. Prior to any argument, I should say that my predisposition is to like Mr. Kharkovski, because he says that his blog is intended to be factual; that the intent is to try to avoid marketing hype and FUD tactic; and mostly because he features a picture of himself wearing a bike helmet (me too). Therefore, in a spirit of technical argument, rather than FUD fight, there are a few areas in his comparison that should be discussed. Scaling is not free For any benchmark, if a small system scores 13k using quantity R1 of some resource, and a big system scores 57k using quantity R2 of that resource, then, sure, it's tempting to divide: is  13k/R1 > 57k/R2 ? It is tempting, but not necessarily educational. The problem is that scaling is not free. Building big systems is harder than building small systems. Scoring  13k/R1  on a little system provides no guarantee whatsoever that one can sustain that ratio when attempting to handle more than 4 times as many users. Choosing the denominator radically changes the picture When ratios are used, one can vastly manipulate appearances by the choice of denominator. In this case, lots of choices are available for the resource to be compared (R1 and R2 above). IBM chooses to put cores in the denominator. Mr. Kharkovski provides some reasons for that choice in his blog entry. And yet, it should be noted that the very concept of a core is: arbitrary: not necessarily comparable across vendors; fluid: modern chips shift chip resources in response to load; and invisible: unless you have a microscope, you can't see it. By contrast, one can actually see processor chips with the naked eye, and they are a bit easier to count. If we put chips in the denominator instead of cores, we get: 13161.07 EjOPS / 4 chips = 3290 EjOPS per chip for IBM vs 57422.17 EjOPS / 16 chips = 3588 EjOPS per chip for Oracle The choice of denominator makes all the difference in the appearance. Speaking for myself, dividing by chips just seems to make more sense, because: I can see chips and count them; and I can accurately compare the number of chips in my system to the count in some other vendor's system; and Tthe probability of being able to continue to accurately count them over the next 10 years of microprocessor development seems higher than the probability of being able to accurately and comparably count "cores". SPEC Fair use requirements Speaking as an individual, not speaking for SPEC and not speaking for my employer, I wonder whether Mr. Kharkovski's blog article, taken as a whole, meets the requirements of the SPEC Fair Use rule www.spec.org/fairuse.html section I.D.2. For example, Mr. Kharkovski's footnote (1) begins Results from http://www.spec.org as of 04/04/2013 Oracle SUN SPARC T5-8 449 EjOPS/core SPECjEnterprise2010 (Oracle's WLS best SPECjEnterprise2010 EjOPS/core result on SPARC). IBM Power730 823 EjOPS/core (World Record SPECjEnterprise2010 EJOPS/core result) The questionable tactic, from a Fair Use point of view, is that there is no such metric at the designated location. At www.spec.org, You can find the SPEC metric 57422.17 SPECjEnterprise2010 EjOPS for Oracle and You can also find the SPEC metric 13161.07 SPECjEnterprise2010 EjOPS for IBM. Despite the implication of the footnote, you will not find any mention of 449 nor anything that says 823. SPEC says that you can, under its fair use rule, derive your own values; but it emphasizes: "The context must not give the appearance that SPEC has created or endorsed the derived value." Substantiation and transparency Although SPEC disclaims responsibility for non-SPEC information (section I.E), it says that non-SPEC data and methods should be accurate, should be explained, should be substantiated. Unfortunately, it is difficult or impossible for the reader to independently verify the pricing: Were like units compared to like (e.g. list price to list price)? Were all components (hw, sw, support) included? Were all fees included? Note that when tpc.org shows IBM pricing, there are often items such as "PROCESSOR ACTIVATION" and "MEMORY ACTIVATION". Without the transparency of a detailed breakdown, the pricing claims are questionable. T5 claim for "Fastest Processor" Mr. Kharkovski several times questions Oracle's claim for fastest processor, writing You see, when you publish industry benchmarks, people may actually compare your results to other vendor's results. Well, as we performance people always say, "it depends". If you believe in performance-per-core as the primary way of looking at the world, then yes, the POWER7+ is impressive, spending its chip resources to support up to 32 threads (8 cores x 4 threads). Or, it just might be useful to consider performance-per-chip. Each SPARC T5 chip allows 128 hardware threads to be simultaneously executing (16 cores x 8 threads). The Industry Standard Benchmark that focuses specifically on processor chip performance is SPEC CPU2006. For this very well known and popular benchmark, SPARC T5: provides better performance than both POWER7 and POWER7+, for 1 chip vs. 1 chip, for 8 chip vs. 8 chip, for integer (SPECint_rate2006) and floating point (SPECfp_rate2006), for Peak tuning and for Base tuning. For example, at the 8-chip level, integer throughput (SPECint_rate2006) is: 3750 for SPARC 2170 for POWER7+. You can find the details at the March 2013 BestPerf CPU2006 page SPEC is a trademark of the Standard Performance Evaluation Corporation, www.spec.org. The two specific results quoted for SPECjEnterprise2010 are posted at the URLs linked from the discussion. Results for SPEC CPU2006 were verified at spec.org 1 July 2013, and can be rechecked here.

  Read the article

• Monitoring Events in your BPEL Runtime - RSS Feeds?

  - by Ramkumar Menon

  @10g - It had been a while since I'd tried something different. so here's what I did this week!Whenever our Developers deployed processes to the BPEL runtime, or perhaps when a process gets turned off due to connectivity issues, or maybe someone retired a process, I needed to know. So here's what I did. Step 1: Downloaded Quartz libraries and went through the documentation to understand what it takes to schedule a recurring job. Step 2: Cranked out two components using Oracle JDeveloper. [Within a new Web Project] a) A simple Java Class named FeedUpdater that extends org.quartz.Job. All this class does is to connect to your BPEL Runtime [via opmn:ormi] and fetch all events that occured in the last "n" minutes. events? - If it doesn't ring a bell - its right there on the BPEL Console. If you click on "Administration > Process Log" - what you see are events.The API to retrieve the events is //get the locator reference for the domain you are interested in.Locator l = .... //Predicate to retrieve events for last "n" minutesWhereCondition wc = new WhereCondition(...) //get all those events you needed.BPELProcessEvent[] events = l.listProcessEvents(wc); After you get all these events, write out these into an RSS Feed XML structure and stream it into a file that resides either in your Apache htdocs, or wherever it can be accessed via HTTP.You can read all about RSS 2.0 here. At a high level, here is how it looks like. <?xml version = '1.0' encoding = 'UTF-8'?><rss version="2.0">  <channel>    <title>Live Updates from the Development Environment</title>    <link>http://soadev.myserver.com/feeds/</link>    <description>Live Updates from the Development Environment</description>    <lastBuildDate>Fri, 19 Nov 2010 01:03:00 PST</lastBuildDate>    <language>en-us</language>    <ttl>1</ttl>    <item>      <guid>1290213724692</guid>      <title>Process compiled</title>      <link>http://soadev.myserver.com/BPELConsole/mdm_product/administration.jsp?mode=processLog&amp;processName=&amp;dn=all&amp;eventType=all&amp;eventDate=600&amp;Filter=++Filter++</link>      <pubDate>Fri Nov 19 00:00:37 PST 2010</pubDate>      <description>SendPurchaseOrderRequestService: 3.0 Time : Fri Nov 19 00:00:37                   PST 2010</description>    </item>   ...... </channel> </rss> For writing ut XML content, read through Oracle XML Parser APIs - [search around for oracle.xml.parser.v2] b) Now that my "Job" was done, my job was half done. Next, I wrote up a simple Scheduler Servlet that schedules the above "Job" class to be executed ever "n" minutes. It is very straight forward. Here is the primary section of the code.           try {        Scheduler sched = StdSchedulerFactory.getDefaultScheduler();         //get n and make a trigger that executes every "n" seconds        Trigger trigger = TriggerUtils.makeSecondlyTrigger(n);        trigger.setName("feedTrigger" + System.currentTimeMillis());        trigger.setGroup("feedGroup");                JobDetail job = new JobDetail("SOA_Feed" + System.currentTimeMillis(), "feedGroup", FeedUpdater.class);        sched.scheduleJob(job,trigger);         }catch(Exception ex) {            ex.printStackTrace();            throw new ServletException(ex.getMessage());        } Look up the Quartz API and documentation. It will make this look much simpler.   Now that both components were ready, I packaged the Application into a war file and deployed it onto my Application Server. When the servlet initialized, the "n" second schedule was set/initialized. From then on, the servlet kept populating the RSS Feed file. I just ensured that my "Job" code keeps only 30 latest events within it, so that the feed file is small and under control. [a few kbs]   Next I opened up the feed xml on my browser - It requested a subscription - and Here I was - watching new deployments/life cycle events all popping up on my browser toolbar every 5 (actually n)  minutes!   Well, you could do it on a browser/reader of your choice - or perhaps read them like you read an email on your thunderbird!.      

  Read the article

• LSI SAS 9240-8i on Ubuntu 12.04 Hangs on Modprobe

  - by Francois Stark

  I used the LSI 9240-8i card on a smaller Intel motherboard with no problems in Ubuntu, with ZFS. However, we rebuilt the server to allow for more disks, using the ASROCK X79 Extreme 11 motherboard. It has 7 PCIe slots, and a LSI 2008 on-board. At first I thought the LSI 9240, when plugged in to PCIe, clashed with the on-board LSI 2008. Every time I plugged in the LSI 9240, modprobe would hang. Then I completely disabled the on-board LSI 2008, and the problem persisted. Last night it booted perfectly ONCE - all LSI cards and connected disks visible... However, all subsequent reboots failed. Both LSI cards' bios scans appear and they both see the disks connected to them, but Ubuntu modprobe hangs. Some selected dmesg lines, with both LSI cards enabled: [ 190.752100] megasas: [ 0]waiting for 1 commands to complete [ 195.772071] megasas: [ 5]waiting for 1 commands to complete [ 200.792079] megasas: [10]waiting for 1 commands to complete [ 205.812078] megasas: [15]waiting for 1 commands to complete [ 210.832037] megasas: [20]waiting for 1 commands to complete [ 215.852077] megasas: [25]waiting for 1 commands to complete [ 220.872072] megasas: [30]waiting for 1 commands to complete [ 225.892078] megasas: [35]waiting for 1 commands to complete [ 230.912086] megasas: [40]waiting for 1 commands to complete [ 235.932075] megasas: [45]waiting for 1 commands to complete [ 240.306157] usb 2-1.5: USB disconnect, device number 7 [ 240.952076] megasas: [50]waiting for 1 commands to complete [ 240.960034] INFO: task modprobe:233 blocked for more than 120 seconds. [ 240.960055] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.960067] modprobe D ffffffff81806200 0 233 146 0x00000004 [ 240.960075] ffff880806ae3b48 0000000000000086 ffff880806ae3ae8 ffffffff8101adf3 [ 240.960083] ffff880806ae3fd8 ffff880806ae3fd8 ffff880806ae3fd8 0000000000013780 [ 240.960090] ffffffff81c0d020 ffff880806acae00 ffff880806ae3b58 ffff880808961720 [ 240.960096] Call Trace: [ 240.960107] [<ffffffff8101adf3>] ? native_sched_clock+0x13/0x80 [ 240.960116] [<ffffffff816579cf>] schedule+0x3f/0x60 [ 240.960137] [<ffffffffa00093f5>] megasas_issue_blocked_cmd+0x75/0xb0 [megaraid_sas] [ 240.960144] [<ffffffff8108aa50>] ? add_wait_queue+0x60/0x60 [ 240.960154] [<ffffffffa000a6c9>] megasas_get_seq_num+0xd9/0x260 [megaraid_sas] [ 240.960164] [<ffffffffa000ab31>] megasas_start_aen+0x31/0x60 [megaraid_sas] [ 240.960174] [<ffffffffa00136f1>] megasas_probe_one+0x69a/0x81c [megaraid_sas] [ 240.960182] [<ffffffff813345bc>] local_pci_probe+0x5c/0xd0 [ 240.960189] [<ffffffff81335e89>] __pci_device_probe+0xf9/0x100 [ 240.960197] [<ffffffff8130ce6a>] ? kobject_get+0x1a/0x30 [ 240.960205] [<ffffffff81335eca>] pci_device_probe+0x3a/0x60 [ 240.960212] [<ffffffff813f5278>] really_probe+0x68/0x190 [ 240.960217] [<ffffffff813f5505>] driver_probe_device+0x45/0x70 [ 240.960223] [<ffffffff813f55db>] __driver_attach+0xab/0xb0 [ 240.960227] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960233] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960237] [<ffffffff813f436c>] bus_for_each_dev+0x5c/0x90 [ 240.960243] [<ffffffff813f503e>] driver_attach+0x1e/0x20 [ 240.960248] [<ffffffff813f4c90>] bus_add_driver+0x1a0/0x270 [ 240.960255] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960260] [<ffffffff813f5b46>] driver_register+0x76/0x140 [ 240.960266] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960271] [<ffffffff81335b66>] __pci_register_driver+0x56/0xd0 [ 240.960277] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960286] [<ffffffffa001e09e>] megasas_init+0x9e/0x1000 [megaraid_sas] [ 240.960294] [<ffffffff81002040>] do_one_initcall+0x40/0x180 [ 240.960301] [<ffffffff810a82fe>] sys_init_module+0xbe/0x230 [ 240.960307] [<ffffffff81661ec2>] system_call_fastpath+0x16/0x1b [ 240.960314] INFO: task scsi_scan_7:349 blocked for more than 120 seconds.

  Read the article

• AdventureWorks2012 now available for all on SQL Azure

  - by jamiet

  Three days ago I tweeted this: Idea. MSFT could host read-only copies of all the [AdventureWorks] DBs up on #sqlazure for the SQL community to use. RT if agree #sqlfamily — Jamie Thomson (@jamiet) March 24, 2012 Evidently I wasn't the only one that thought this was a good idea because as you can see from the screenshot that tweet has, so far, been retweeted more than fifty times. Clearly there is a desire to see the AdventureWorks databases made available for the community to noodle around on so I am pleased to announce that as of today you can do just that - [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use* for their own means. *By use I mean "issue some SELECT statements". You don't have permission to issue INSERTs, UPDATEs, DELETEs or EXECUTEs I'm afraid - if you want to do that then you can get the bits and host it yourself. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected]: Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more that we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. OK, with the prickly subject of begging for cash out of the way let me share the details that you need to connect to [AdventureWorks2012] on SQL Azure: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly That user sqlfamily has all the permissions required to enable you to query away to your heart's content. Here is the code that I used to set it up: CREATE USER sqlfamily FOR LOGIN sqlfamily;CREATE ROLE sqlfamilyrole;EXEC sp_addrolemember 'sqlfamilyrole','sqlfamily';GRANT VIEW DEFINITION ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT VIEW DATABASE STATE ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT SHOWPLAN TO sqlfamilyrole;EXEC sp_addrolemember 'db_datareader','sqlfamilyrole'; You can connect to the database using SQL Server Management Studio (instructions to do that are provided at Walkthrough: Connecting to SQL Azure via the SSMS) or you can use the web interface at https://mhknbn2kdz.database.windows.net: Lastly, just for a bit of fun I created a table up there called [dbo].[SqlFamily] into which you can leave a small calling card. Simply execute the following SQL statement (changing the values of course): INSERT [dbo].[SqlFamily]([Name],[Message],[TwitterHandle],[BlogURI])VALUES ('Your name here','Some Message','your twitter handle (optional)','Blog URI (optional)'); [Id] is an IDENTITY field and there is a default constraint on [DT] hence there is no need to supply a value for those. Note that you only have INSERT permissions, not UPDATE or DELETE so make sure you get it right first time! Any offensive or distasteful remarks will of course be deleted :) Thank you for reading this far and have fun using AdventureWorks on Azure. I hope it proves to be useful for some of you. @jamiet AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

  Read the article

• Will You Accept This Rose?

  - by user715249

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Ashley, Bentley and the Masked Man. If these names mean anything to you we know where you’ll be on Monday night – planted in front of your television awaiting the villain’s return and what is sure to be the most dramatic rose ceremony yet on the Bachelorette.  If you’re the Oracle PartnerNetwork Communications Team you’ll be spending your Monday night putting the final touches on the most exciting Partner Kickoff Event yet.  Listen in as Judson tells you more. Starting at 6:00 AM PT on Tuesday, June 29th partners – and potential partners – can tune in to watch the excitement unfold at partner.oracle.com.  The storyline for FY12 will continue to unfold with a special role being outlined for our ISV partners.  SPOILER ALERT: OPN has made an investment in how we’ll go to market together – trust us - you don’t want to get this news from the highlight reel. While we won’t be sending anyone home from the show, we do promise an exciting hour which will gear you up to go to market with Oracle in the new fiscal year.  The Oracle PartnerNetwork FY12 Kickoff is being held live 5 times and will include a ‘date card’ message for each region. EMEA Kickoff - Tuesday, June 29, at 6 a.m. PT / 2 p.m. BT LAD Kickoff – Tuesday, June 29, at 8 a.m. PT / noon DT North America Kickoff – Tuesday, June 29, at 10 a.m. PT / 1 p.m. ET Japan Kickoff – Tuesday, June 29, at 6 p.m. PT / Wednesday, June 30, at 10 a.m. JT (Tokyo) APAC Kickoff– Tuesday, June 29, at 8 p.m. PT / Wednesday, June 30, at 11 a.m. SGT (Singapore) / 1 p.m. AET (Sydney) We’ll be taking your questions live throughout the show – we hope you’ll “accept our rose” and join us on this amazing journey. The OPN Communications Team

  Read the article

• Silverlight Cream for December 18, 2010 -- #1012

  - by Dave Campbell

  In this Issue: Mark Monster, Kevin Dockx, Jeremy Likness(-2-,-3-), Timmy Kokke, Den Delimarsky, Mike Snow, Samuel Jack(-2-), and Renuka Prasad(-2-). Above the Fold: Silverlight: "Trigger a Storyboard on ViewModel changes" Mark Monster WP7: "Microsoft Push Notification in Windows Phone 7" Renuka Prasad Shoutouts: SilverlightGal sent me the link to The Silverlight Dossier ... I think it's a pretty good start... additions I'd like to see are ways to submit to the various areas. Michael Crump put up a contest that runs from now to January 1st... Win a set of Infragistics Silverlight Controls with Data Visualization!... pretty cool, Michael! If you visit WynApse.com, you'll see I have a subscription to LearnVisualStudio.net... and now they have posted a batch of WP7 videos... 64 of them to be exact... wow!: New video series From SilverlightCream.com: Trigger a Storyboard on ViewModel changes Mark Monster has a great post up about triggering Storyboard on ViewModel changes using the DataTrigger from Blend... cool stuff, and you can also do GoToStateAction or other actions or build yourowndang Trigger Action... fun awaits! ... sorry it took a while to post, Mark... been a tad overloaded here! Working with the Silverlight Rich Text Box control Kevin Dockx has had a post up for a while at SilverlightShow where he takes a good look at the RichText control and it's various capabilities, including source so you can give it a dance yourself. Lessons Learned in Personal Web Page Part 3: Custom Panel and Listbox Jeremy Likness's part 3 of his Personal Web Page lessons learned is covering the tres-cool 3D Panel he did... and he's got it all explained out... building from scratch via a custom panel and a Listbox control... A Silverlight MVVM Feed Reader from Scratch in 30 Minutes Jeremy Likness has a video tutorial showing building an MVVM/Silverlight feedreader in 30 minutes ... plus a couple mods that he noticed after the fact... beat that HTML5 :) Jounce Part 8: Raising Property Changed In Jeremy Likness's latest post, he has number 8 in his series on his MVVM platform, Jounce. This time he's explaining the property changed notification, has a very cool way of doing it, and some interesting comments from readers. Dependency Injection, MVVM, Ninject and Silverlight Timmy Kokke has a great tutorial up with associated demo project on Dependency Injection in MVVM and Silverlight. Some hidden features in the Windows Phone 7 emulator Den Delimarsky shows how to get some of the hidden features on your WP7 emulator like the Call History, Call Settings, and Details about the numbers. Playing sound effects on Windows Phone 7 Mike Snow's latest tip is playing sound effects on your WP7 ... a little bit of XNA here and there, and badabing, badaboom, you got sound! Day 3 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack has a couple more posts up about his 'Build a WP7 game in 3 Days' challenge... first up is Day 3 from 8:50 to 22:30 ... wow... long day! ... but he's got something good going now... some good external links also Day 3.5 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack's 3rd day ended with another half-day added on to put on some finishing touches... again, some good external links... and he finished with this Say hello to Simon Squared, my 3.5 day old WP7 Game Microsoft Push Notification in Windows Phone 7 Renuka Prasad has a bunch of material up that I've not been aware of (how did that happen, people??) ... here's the first of a couple of his posts on Code Project ... a very nice tutorial on the Push Notification process... great diagrams and external links. Windows Phone 7 – Toast Notification Using Windows Azure Cloud Service Renuka Prasad has another WP7 post on CodeProject... this one on Toast Notification... and he's using Azure and WCF all rolled into it as well... great diagrams, descriptions and all the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Ubuntu 12.04 lightdm dumps to tty. Cannot start GUI interface when booting off harddrive, but can when booting off usb

  - by user72681

  When booting, lightdm dumps to tty. No GUI interface works- this is after a fresh install of Ubuntu 12.04 where the GUI interface works when running off the USB. I have an NVIDIA Corporation G98 [Quadro NVS 420] graphics card. After I call startx from the terminal it still doesn't work. I get the following in the Xorg.0.log: [ 327.718] (--) NVIDIA(0): Memory: 262144 kBytes [ 327.718] (--) NVIDIA(0): VideoBIOS: 62.98.6f.00.07 [ 327.718] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 327.718] (--) NVIDIA(0): Interlaced video modes are supported on this GPU [ 327.756] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 420 at PCI:3:0:0 [ 327.756] (--) NVIDIA(0): none [ 327.756] (EE) NVIDIA(0): No display devices found for this X screen. [ 328.010] (II) UnloadModule: "nvidia" [ 328.010] (II) Unloading nvidia [ 328.010] (II) UnloadModule: "wfb" [ 328.010] (II) Unloading wfb [ 328.010] (II) UnloadModule: "fb" [ 328.010] (II) Unloading fb [ 328.011] (EE) Screen(s) found, but none have a usable configuration. [ 328.011] Fatal server error: [ 328.011] no screens found /var/log/lightdm/lightdm.log [+0.00s] DEBUG: Starting local X display [+0.00s] DEBUG: X server :0 will replace Plymouth [+0.02s] DEBUG: Using VT 7 [+0.02s] DEBUG: Activating VT 7 [+0.02s] DEBUG: Logging to /var/log/lightdm/x-0.log [+0.02s] DEBUG: Writing X server authority to /var/run/lightdm/root/:0 [+0.02s] DEBUG: Launching X Server [+0.02s] DEBUG: Launching process 1074: /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none [+0.02s] DEBUG: Waiting for ready signal from X server :0 [+0.02s] DEBUG: Acquired bus name org.freedesktop.DisplayManager [+0.02s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0 [+1.38s] DEBUG: Process 1074 exited with return value 1 [+1.38s] DEBUG: X server stopped [+1.38s] DEBUG: Removing X server authority /var/run/lightdm/root/:0 [+1.38s] DEBUG: Releasing VT 7 [+1.38s] DEBUG: Stopping Plymouth, X server failed to start [+1.39s] DEBUG: Display server stopped [+1.39s] DEBUG: Stopping display [+1.39s] DEBUG: Display stopped [+1.39s] DEBUG: Stopping X local seat, failed to start a display [+1.39s] DEBUG: Stopping seat [+1.39s] DEBUG: Seat stopped [+1.39s] DEBUG: Required seat has stopped [+1.39s] DEBUG: Stopping display manager [+1.39s] DEBUG: Display manager stopped [+1.39s] DEBUG: Stopping daemon [+1.39s] DEBUG: Exiting with return value 1 /var/log/lightdm/x-0.log X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-31-server x86_64 Ubuntu Current Operating System: Linux oorn 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic root=UUID=b25ab072-077d-40f1-95a4-c7fd66acd2f0 ro reboot=pci quiet splash vt.handoff=7 Build Date: 07 May 2012 11:43:21PM xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.24.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 27 12:51:45 2012 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) NVIDIA(0): No display devices found for this X screen. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log Server terminated with error (1). Closing log file.

  Read the article

• SQL SERVER – Beginning New Weekly Series – Memory Lane – #002

  - by pinaldave

  Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Query to Find ByteSize of All the Tables in Database This was my second blog post and today I do not remember what was the business need which has made me build this query. It was built for SQL Server 2000 and it will not directly run on SQL Server 2005 or later version now. It measured the byte size of the tables in the database. This can be done in many different ways as well for example SP_HELPDB as well SP_HELP. I wish to build similar script in 2005 and later version. 2007 This week I had completed my – 1 Year (365 blogs) and very first 1 Million Views. I was pretty excited at that time with this new achievement. SQL SERVER Versions, CodeNames, Year of Release When I started with SQL Server I did not know all the names correctly for each version and I often used to get confused with this. However, as time passed by I started to remember all the codename as well. In this blog post I have not included SQL Server 2012′s code name as it was not released at the time. SQL Server 2012′s code name is Denali. Here is the question for you – anyone know what is the internal name of the SQL Server’s next version? Searching String in Stored Procedure I have already started to work with 2005 by this time and I was personally converting each of my stored procedures to SQL Server 2005 compatible. As we were upgrading from SQL Server 2000 to SQL Server 2005 we had to search each of the stored procedures and make sure that we remove incompatible code from it. For example, syscolumns of SQL Server 2000 was now being replaced by sys.columns of SQL Server 2005. This stored procedure was pretty helpful at that time. Later on I build few additional versions of the same stored procedure. Version 1: This version finds the Stored Procedures related to Table Version 2: This is specific version which works with SQL Server 2005 and later version 2008 Clear Drop Down List of Recent Connection From SQL Server Management Studio It happens to all of us when we connected to some remote client server and we never ever have to connect to it again. However, it keeps on bothering us that the name shows up in the list all the time. In this blog post I covered a quick tip about how we can remove the same. I also wrote a small article about How to Check Database Integrity for all Databases and there was a funny question from a reader requesting T-SQL code to refresh databases. 2009 Stored Procedure are Compiled on First Run – SP is taking Longer to Run First Time A myth is quite prevailing in the industry that Stored Procedures are pre-compiled and they should always run faster. It is not true. Stored procedures are compiled on very first execution of it and that is the reason why it takes longer when it executes first time. In this blog post I had a great time discussing the same concept. If you do not agree with it, you are welcome to read this blog post. Removing Key Lookup – Seek Predicate – Predicate – An Interesting Observation Related to Datatypes Performance Tuning is an interesting concept and my personal favorite one. In many blog posts I have described how to do performance tuning and how to improve the performance of the queries. In this quick quick tip I have explained how one can remove the Key Lookup and improve performance. Here are very relevant articles on this subject: Article 1 | Article 2 | Article 3 2010 Recycle Error Log – Create New Log file without a Server Restart During one of the consulting assignments I noticed DBA restarting server to create new log file. This is absolutely not necessary and restarting server might have many other negative impacts. There is a common sp_cycle_errorlog which can do the same task efficiently and properly. Have you ever used this SP or feature? Additionally I had a great time presenting on SQL Server Best Practices in SharePoint Conference. 2011 SSMS 2012 Reset Keyboard Shortcuts to Default It is very much possible that we mix up various SQL Server shortcuts and at times we feel like resetting it to default. In SQL Server 2012 it is not easy to do it, there is a process to follow and I enjoyed blogging about it. Fundamentals of Columnstore Index Columnstore index is introduced in SQL Server 2012 and have been a very popular subject. It increases the speed of the server dramatically as well can be an extremely useful feature with Datawharehousing. However updating the columnstore index is not as simple as a simple UPDATE statement. Read in a detailed blog post about how Update works with Columnstore Index. Additionally, you can watch a Quick Video on this subject. SQL Server 2012 New Features I had decided to explore SQL Server 2012 features last year and went through pretty much every single concept introduced in separate blog posts. Here are two blog posts where I describe how SQL Server 2012 functions works. Introduction to CUME_DIST – Analytic Functions Introduction to FIRST _VALUE and LAST_VALUE – Analytic Functions OVER clause with FIRST_VALUE and LAST_VALUE – Analytic Functions I indeed enjoyed writing about SQL Server 2012 functions last year. Have you gone through all the new features which are introduced in SQL Server 2012? If not, it is still not late to go through them. Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Updating FGLRX driver fails & deactivates FGLRX driver

  - by Edwin

  I have an ATI/AMD graphics card in my computer. However, every time I try to install the post-release updates, it always fails and deactivates the graphics driver. I've pasted the last few messages following the ldconfig deferred processing now taking place message from the installation log from /var/log/jockey.log below; if you're interested, I have pasted the full output here. WARNING: /sys/module/fglrx_updates/drivers does not exist, cannot rebind fglrx_updates driver DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx_updates): target_alt None current_alt /usr/lib/fglrx/ld.so.conf other target alt None other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: fglrx_updates is not the alternative in use DEBUG: fglrx.enabled(fglrx): target_alt /usr/lib/fglrx/ld.so.conf current_alt /usr/lib/fglrx/ld.so.conf other target alt /usr/lib/fglrx/alt_ld.so.conf other current alt /usr/lib/fglrx/alt_ld.so.conf DEBUG: XorgDriverHandler(%s, %s).enabled(): No X.org driver set, not checking What's going on? Is ldconfig corrupted, or has the driver package just not been properly installed, despite reporting to the "Additional Drivers" panel that it is?

  Read the article

• Oredev 2011 Trip Report

  - by arungupta

  Oredev had its seventh annual conference in the city of Malmo, Sweden last week. The name "Oredev" signifies to the part that Malmo is connected with Copenhagen with Oresund bridge. There were about 1000 attendees with several speakers from all over the world. The first two days were hands-on workshops and the next three days were sessions. There were different tracks such as Java, Windows 8, .NET, Smart Phones, Architecture, Collaboration, and Entrepreneurship. And then there was Xtra(ck) which had interesting sessions not directly related to technology. I gave two slide-free talks in the Java track. The first one showed how to build an end-to-end Java EE 6 application using NetBeans and GlassFish. The complete instructions to build the application are explained in detail here. This 3-tier application used Java Persistence API, Enterprsie Java Beans, Servlet, Contexts and Dependency Injection, JavaServer Faces, and Java API for RESTful Services. The source code built during the application can be downloaded here (LINK TBD). The second session, slide-free again, showed how to take a Java EE 6 application into production using GlassFish cluster. It explained: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete instructions for this session are available here. Oredev has an interesting way of collecting attendee feedback. The attendees drop a green, yellow, or red card in a bucket as they walk out of the session. Not everybody votes but most do. Other than the instantaneous feedback provided on twitter, this mechanism provides a more coarse grained feedback loop as well. The first talk had about 67 attendees (with 23 green and 7 yellow) and the second one had 22 (11 green and 11 yellow). The speakers' dinner is a good highlight of the conference. It is arranged in the historic city hall and the mayor welcomed all the speakers. As you can see in the pictures, it is a very royal building with lots of history behind it. Fortunately the dinner was a buffet with a much better variety unlike last year where only black soup and geese were served, which was quite cultural BTW ;-) The sauna in 85F, skinny dipping in 35F ocean and alternating between them at Kallbadhus is always very Swedish. Also spent a short evening at a friend's house socializing with other speaker/attendees, drinking Glogg, and eating Pepperkakor.  The welcome packet at the hotel also included cinnamon rolls, recommended to drink with cold milk, for a little more taste of Swedish culture. Something different at this conference was how artists from Image Think were visually capturing all the keynote speakers using images on whiteboards. Here are the images captured for Alexis Ohanian (Reddit co-founder and now running Hipmunk): Unfortunately I could not spend much time engaging with other speakers or attendees because was busy preparing a new hands-on lab material. But was able to spend some time with Matthew Mccullough, Micahel Tiberg, Magnus Martensson, Mattias Karlsson, Corey Haines, Patrick Kua, Charles Nutter, Tushara, Pradeep, Shmuel, and several other folks. Here are a few pictures captured from the event: And the complete album here: Thank you Matthias, Emily, and Kathy for putting up a great show and giving me an opportunity to speak at Oredev. I hope to be back next year with a more vibrant representation of Java - the language and the ecosystem!

  Read the article

• Oredev 2011 Trip Report

  - by arungupta

  Oredev had its seventh annual conference in the city of Malmo, Sweden last week. The name "Oredev" signifies to the part that Malmo is connected with Copenhagen with Oresund bridge. There were about 1000 attendees with several speakers from all over the world. The first two days were hands-on workshops and the next three days were sessions. There were different tracks such as Java, Windows 8, .NET, Smart Phones, Architecture, Collaboration, and Entrepreneurship. And then there was Xtra(ck) which had interesting sessions not directly related to technology. I gave two slide-free talks in the Java track. The first one showed how to build an end-to-end Java EE 6 application using NetBeans and GlassFish. The complete instructions to build the application are explained in detail here. This 3-tier application used Java Persistence API, Enterprsie Java Beans, Servlet, Contexts and Dependency Injection, JavaServer Faces, and Java API for RESTful Services. The source code built during the application can be downloaded here (LINK TBD). The second session, slide-free again, showed how to take a Java EE 6 application into production using GlassFish cluster. It explained: Create a 2-instance GlassFish cluster Front-end with a Web server and a load balancer Demonstrate session replication and fail over Monitor the application using JavaScript The complete instructions for this session are available here. Oredev has an interesting way of collecting attendee feedback. The attendees drop a green, yellow, or red card in a bucket as they walk out of the session. Not everybody votes but most do. Other than the instantaneous feedback provided on twitter, this mechanism provides a more coarse grained feedback loop as well. The first talk had about 67 attendees (with 23 green and 7 yellow) and the second one had 22 (11 green and 11 yellow). The speakers' dinner is a good highlight of the conference. It is arranged in the historic city hall and the mayor welcomed all the speakers. As you can see in the pictures, it is a very royal building with lots of history behind it. Fortunately the dinner was a buffet with a much better variety unlike last year where only black soup and geese were served, which was quite cultural BTW ;-) The sauna in 85F, skinny dipping in 35F ocean and alternating between them at Kallbadhus is always very Swedish. Also spent a short evening at a friend's house socializing with other speaker/attendees, drinking Glogg, and eating Pepperkakor.  The welcome packet at the hotel also included cinnamon rolls, recommended to drink with cold milk, for a little more taste of Swedish culture. Something different at this conference was how artists from Image Think were visually capturing all the keynote speakers using images on whiteboards. Here are the images captured for Alexis Ohanian (Reddit co-founder and now running Hipmunk): Unfortunately I could not spend much time engaging with other speakers or attendees because was busy preparing a new hands-on lab material. But was able to spend some time with Matthew Mccullough, Micahel Tiberg, Magnus Martensson, Mattias Karlsson, Corey Haines, Patrick Kua, Charles Nutter, Tushara, Pradeep, Shmuel, and several other folks. Here are a few pictures captured from the event: And the complete album here: Thank you Matthias, Emily, and Kathy for putting up a great show and giving me an opportunity to speak at Oredev. I hope to be back next year with a more vibrant representation of Java - the language and the ecosystem!

  Read the article

• Using Live Data in Database Development Work

  - by Phil Factor

  Guest Editorial for Simple-Talk Newsletter... in which Phil Factor reacts with some exasperation when coming across a report that a majority of companies were still using financial and personal data for both developing and testing database applications. If you routinely test your development work using real production data that contains personal or financial information, you are probably being irresponsible, and at worst, risking a heavy financial penalty for your company. Surprisingly, over 80% of financial companies still do this. Plenty of data breaches and fraud have happened from the use of real data for testing, and a data breach is a nightmare for any organisation that suffers one. The cost of each data breach averages out at around $7.2 million in the US in notification, escalation, credit monitoring, fines, litigation, legal costs, and lost business due to customer churn, £1.9 million in the UK. 70% of data breaches are done from within the organisation. Real data can be exploited in a number of ways for malicious or criminal purposes. It isn't just the obvious use of items such as name and address, date of birth, social security number, and credit card and bank account numbers: Data can be exploited in many subtle ways, so there are excellent reasons to ensure that a high priority is given to the detection and prevention of any data breaches. You'll never successfully guess all the ways that real data can be exploited maliciously, or the ease with which it can be accessed. It would be silly to argue that developers never need access to a copy of the database containing live data. Developers sometimes need to track a bug that can only be replicated on the data from the live database. However, it has to be done in a very restrictive harness. The law makes no distinction between development and production databases when a data breach occurs, so the data has to be held with all appropriate security measures in place. In Europe, the use of personal data for testing requires the explicit consent of the people whose data is being held. There are federal standards such as GLBA, PCI DSS and HIPAA, and most US States have privacy legislation. The task of ensuring compliance and tight security in such circumstances is an expensive and time-consuming overhead. The developer is likely to suffer investigation if a data breach occurs, even if the company manages to stay in business. Ironically, the use of copies of live data isn't usually the most effective way to develop or test your data. Data is usually time-specific and isn't usually current by the time it is used for testing, Existing data doesn't help much for new functionality, and every time the data is refreshed from production, any test data is likely to be overwritten. Also, it is not always going to test all the 'edge' conditions that are likely to flush out bugs. You still have the task of simulating the dynamics of actual usage of the database, and here you have no alternative to creating 'spoofed' data. Because of the complexities of relational data, It used to be that there was no realistic alternative to developing and testing with live data. However, this is no longer the case. Real data can be obfuscated, or it can be created entirely from scratch. The latter process used to be impractical, now that there are plenty of third-party tools to choose from. The process of obfuscation isn't risk free. The process must access the live data, and the success of the obfuscation process has to be carefully monitored. Database data security isn't an exciting topic to you or I, but to a hacker it can be an all-consuming obsession, especially if there is financial or political gain involved. This is not the sort of adversary one would wish for and it is far better to accept, and work with, security restrictions that exist for using live data in database development work, especially when the tools exist to create large realistic database test data that can be better for several aspects of testing.

  Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >