Search Results

Search found 42302 results on 1693 pages for 'start screen'.

Page 302/1693 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• Proliant RAID 1 Rebuild Questions

  - by Nicholas

  I have a HP Proliant ML350 G5 server that experienced a power supply failure overnight. The power supply was replaced but unfortunately it got restarted with only 1 disk in the RAID 1 set plugged in. (The raid controller is the build in E200i). The raid BIOS then said on start-up that it had entered Interim Recovery Mode. However I would have expected it to still start up with only the 1 drive. The bios however says that it cannot find a C: drive and enters a reboot loop polling the other boot devices. First question is, is this normal behaviour not to start up on 1 disk? The second drive was then plugged in (all drives are ok) and the raid bios started an automatic rebuild on that disk. This appears to be a background process as there is no progress shown. However based on the light flashing it looks like it is working. My second question is how long will this rebuild take? (36GB 15K SAS drive). I cannot see any error messages and it looks like it is rebuilding the drive ok, but the computer still will not start-up. It still says during the boot up process that the C: drive is not found. If I wait for the rebuild to finish, is it likely to fix itself and find the C: drive? Or is there some other problem here?

  Read the article

• First Request to IIS Express Fails with 503 Service Unavailable, Second Succeeds

  - by Chris Moschini

  Each time I start my ASP.Net MVC 3 app from Visual Studio 2010, IIS Express launches and IE spins waiting. The request fails with HTTP 503 Service Unavailable. I hit Refresh in IE, and the request succeeds. All subsequent requests succeed until I stop debugging. The next time I go to start debugging, the first request fails again. Has anyone else experienced this? In IISExpress\applicationhost.config I have: <site name="ProjectName" id="6"> <application path="/" applicationPool="Clr4IntegratedAppPool"> <virtualDirectory path="/" physicalPath="c:\users\chris\dropbox\code\2010\SolutionName\ProjectName" /> </application> <bindings> <binding protocol="http" bindingInformation="*:80:laptop" /> </bindings> </site> I have this in my hosts file: 127.0.0.1 laptop And my Project is set to start with IIS Express, with Project Url set to: http://laptop It's very strange that only the first request fails, perhaps as though Visual Studio isn't waiting long enough for IIS Express to start? Is there some way to make it wait? Stopping debugging, making a change, and then starting again is one of the most common tasks I do so adding another step to get there is pretty annoying.

  Read the article

• Outlook errors and blank address book?

  - by Chasester

  I have a user with a fresh install of Windows 7 64 bit. Office 2010 was installed also. Everything worked great until we installed Adobe Pro 9 and Wordperfect 12. (for outlook we are not using exchange). Then Outlook popped an error saying could not start Outlook. I then modified it to run in compatibility mode and Outlook starts. Then took compatibility mode off and outlook continues to start without difficulty. However, her address book went blank (contacts are all there). In the properties of the contact folder it is checked (and grayed out) to include this folder in the address book, and the Outlook address book is listed when I look at account properties. I tried creating a new profile to no avail. I tried creating a new profile and creating a new pst file - to no avail. I tried uninstalling office, removing the folders inside roaming and local, reinstalled office; got the same could not start Outlook error - did the compatibility mode bit and got it to start - but the Address book continues to be empty. Has anyone run across this before? I'm thinking that there must be some other preferences type folder other than those in Roaming and Local since her signature remained when I reinstalled Office.

  Read the article

• How can I fix my corrupted RAID1 ext4 partition on a Synology DS212 NAS?

  - by Neil

  I have two identical 3 TB disks that were in a RAID1 array, where one disk crashed. I replaced the failed disk, but not after the RAID partitions got messed up. I need to figure out how to restore the RAID array and get at my ext4 partition. Here are the properties of the surviving disk: # fdisk -l /dev/sda fdisk: device has more than 2^32 sectors, can't use all of them Disk /dev/sda: 2199.0 GB, 2199023255040 bytes 255 heads, 63 sectors/track, 267349 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee EFI GPT # parted /dev/sda print Model: ATA ST3000DM001-9YN1 (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 131kB 2550MB 2550MB ext4 raid 2 2550MB 4698MB 2147MB linux-swap(v1) raid 5 4840MB 3001GB 2996GB raid I replaced the failed drive, and cloned the surviving drive to it so I have something to work with. I cloned the drives with dd if=/dev/sdb of=/dev/sda conv=noerror bs=64M, and now /dev/sda and /dev/sdb are identical. Here is the RAID information: # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md1 : active raid1 sdb2[1] 2097088 blocks [2/1] [_U] md0 : active raid1 sdb1[1] 2490176 blocks [2/1] [_U] unused devices: <none> It seems that md2 is missing. Here is what testdisk 6.14-WIP finds: Disk /dev/sda - 3000 GB / 2794 GiB - CHS 364801 255 63 Current partition structure: Partition Start End Size in sectors 1 P Linux Raid 256 4980735 4980480 [md0] 2 P Linux Raid 4980736 9175039 4194304 [md1] Invalid RAID superblock 5 P Linux Raid 9453280 5860519007 5851065728 5 P Linux Raid 9453280 5860519007 5851065728 # After a quick search Disk /dev/sda - 3000 GB / 2794 GiB - CHS 364801 255 63 Partition Start End Size in sectors D MS Data 256 4980607 4980352 [1.41.12-2197] D Linux Raid 256 4980735 4980480 [md0] D Linux Swap 4980736 9174895 4194160 D Linux Raid 4980736 9175039 4194304 [md1] >P MS Data 9481056 5858437983 5848956928 [1.41.12-2228] And listing the files on the last partition in the list shows all of my files intact. What should I do?

  Read the article

• Hudson Mercurial checkout throws exception on Debian

  - by Jack

  I'm trying to configure Hudson to checkout my site's sources from Mercurial but it throws an exception. The /var/lib/hudson/jobs/jobname directory does exist, and I can create a workspace directory in there (even after su hudson), but as soon as I run the Hudson job again this directory disappears and the job ends with the same error: java.io.IOException: Cannot run program "hg" (in directory "/var/lib/hudson/jobs/jobname/workspace"): java.io.IOException: error=2, No such file or directory at java.lang.ProcessBuilder.start(ProcessBuilder.java:460) at hudson.Proc$LocalProc.<init>(Proc.java:192) at hudson.Proc$LocalProc.<init>(Proc.java:164) at hudson.Launcher$LocalLauncher.launch(Launcher.java:639) at hudson.Launcher$ProcStarter.start(Launcher.java:274) at hudson.Launcher$ProcStarter.join(Launcher.java:281) at hudson.plugins.mercurial.MercurialSCM.joinWithPossibleTimeout(MercurialSCM.java:298) at hudson.plugins.mercurial.HgExe.popen(HgExe.java:191) at hudson.plugins.mercurial.HgExe.tip(HgExe.java:171) at hudson.plugins.mercurial.MercurialSCM.calcRevisionsFromBuild(MercurialSCM.java:254) at hudson.scm.SCM._calcRevisionsFromBuild(SCM.java:304) at hudson.model.AbstractProject.calcPollingBaseline(AbstractProject.java:1183) at hudson.model.AbstractProject.checkout(AbstractProject.java:1172) at hudson.model.AbstractBuild$AbstractRunner.checkout(AbstractBuild.java:499) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:415) at hudson.model.Run.run(Run.java:1362) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:145) Caused by: java.io.IOException: java.io.IOException: error=2, No such file or directory at java.lang.UNIXProcess.<init>(UNIXProcess.java:148) at java.lang.ProcessImpl.start(ProcessImpl.java:65) at java.lang.ProcessBuilder.start(ProcessBuilder.java:453) Running on Debian 6.0.1 I wonder if anyone has ran into this before, and hopefully solved it?

  Read the article

• Removing Little Snitch completely (Mac OS X Snow Leopard)

  - by Mathias Bynens

  I uninstalled Little Snitch months ago. Or so, I thought. When opening Console.app, I see something like this: Here’s a textual log: 21/11/09 22:05:31 com.apple.launchd[1] (at.obdev.littlesnitchd[10045]) Exited with exit code: 1 21/11/09 22:05:31 com.apple.launchd[1] (at.obdev.littlesnitchd) Throttling respawn: Will start in 10 seconds 21/11/09 22:05:33 Little Snitch UIAgent[10046] 2.0.4.385: m65968c1c 21/11/09 22:05:33 Little Snitch UIAgent[10046] 2.0.4.385: m579328b9 21/11/09 22:05:33 Little Snitch UIAgent[10046] 2.0.4.385: m41531ded 21/11/09 22:05:33 com.apple.launchd.peruser.501[170] (at.obdev.LittleSnitchUIAgent) Throttling respawn: Will start in 10 seconds 21/11/09 22:05:41 com.apple.launchd[1] (at.obdev.littlesnitchd[10049]) Exited with exit code: 1 21/11/09 22:05:41 com.apple.launchd[1] (at.obdev.littlesnitchd) Throttling respawn: Will start in 10 seconds 21/11/09 22:05:43 Little Snitch UIAgent[10050] 2.0.4.385: m65968c1c 21/11/09 22:05:43 Little Snitch UIAgent[10050] 2.0.4.385: m579328b9 21/11/09 22:05:43 Little Snitch UIAgent[10050] 2.0.4.385: m41531ded 21/11/09 22:05:43 com.apple.launchd.peruser.501[170] (at.obdev.LittleSnitchUIAgent) Throttling respawn: Will start in 10 seconds Spotlight searches for ‘little snitch’ or ‘littlesnitch’ yield no results. Yet, it seems like I didn’t get rid of Little Snitch entirely, since it’s still using up my CPU. Any ideas?

  Read the article

• Can't pop3 from exchange server after a reboot

  - by BLAKE

  Last night I shutdown my Exchange 2003 Virtual Machine, I added a new VHD (For backups), and booted it again. Now I can't POP3 email from it with Outlook 2007. In Outlook I get the error: Task '[email protected] - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).' Does anybody know what is wrong? All I did was a reboot. I haven't formated the added disk. There are no weird errors in the event log. I can still send mail with Outlook over port 25. I can send and recieve mail with OWA. I can POP3 the mail to my phone (it take about 15 minutes after sending a message, but I do get it eventually). EDIT: The 'Microsoft Exchange POP3' Service says that it is started but if I stop it and try to start it again, it fails saying 'Could not start the Microsoft Exchange POP3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion.' I did some googling and someone on exchangefreaks.com said that if I use task manager to 'End Task' on inetinfo.exe, then I can start the POP3 service fine. Does anyone know what causes this problem? I am fine for now since I did get the Service started, but If it does this after every reboot...

  Read the article

• Mainboard shuts itself off after half a second or so

  - by heishe

  Here's the problem: When I start the PC, the mainboard powers up, then stays that way maybe 0.2-0.5 seconds, and then shuts off again. I say mainboard, and not PC, because I removed all the parts from the system and disconnected everything but the mainboard power supply (the broad 12 pin thingy). When I have the other parts (cpu, graphics card, ram, etc.) installed and connected, the basic behaviour stays the same, but now the mainboard runs for about 6 or 7 seconds (this is a guess) before shutting off. This all started when my monitor wouldn't receive a video signal today, without giving POSTs, so I took the graphics card and the RAM out to see if it changes anything. It didn't, except that from that point on the mainboard would start to have this behavior where it just stays on for a very short time and then shuts off again. I already tested it with a backup PSU - same behavior. What could this be? I'm thinking it can't be on a physical level (transistors burned through or something like that), since then the mainboard either shouldn't start at all or it should detect hardware failures in non-essential parts of the syste and start beeping. Sorry, I forgot to mention. It's an MSI P67A-C43. I already checked the capacitors if someone popped, but I can't find anything. I also tried resetting the cmos, but that didn't change anything.

  Read the article

• VMware Workstation reboot 32-bit host when starting 64-bit guest

  - by Powerman

  I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas?

  Read the article

• Updating modules on VPS hosted under OpenVZ

  - by tertle

  Been trying to install OpenVPN on a VPS but come into a few problems when trying to start the openvpn server: Service deferred error: IPTablesServiceBase: failed to run iptables-restore [status=1]: ['FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'iptables-restore: line 46 failed']: internet/base:1175,internet/base:752,internet/process:45,internet/process:306,internet/_baseprocess:48,internet/process:775,internet/_baseprocess:60,svc/pp:116,svc/svcnotify:26,internet/defer:238,internet/defer:307,internet/defer:323,sagent/ipts:105,sagent/ipts:39,util/error:52,util/error:32 service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['iptables_openvpn']) Anyway so after a bit of playing around and some advice, I found that the Linux kernel and modules don't match on my server. uname -r returns 2.6.18-028stab070.14 and ls /lib/modules returns 2.6.18-028stab070.7 The server is running OpenVZ and my container uses Ubuntu 9.10. So my question is, is it possible for me to update my modules on a VPS and if so how would I do this, or is this something I'll need to try get my host to do? Thanks in advance.

  Read the article

• Debugging a Drobo that chokes Windows 7x64 When Plugged In

  - by Pridkett

  I've had a love hate relationship with my Drobo for a long time. After two years of using it on a Linux box, I moved it over to a Windows 7 machine where it seemed to work just fine for a long time, but it was under very light usage. Mainly backups that never actually happened. Recently I began using it for additional backup services (through CrashPlan, which is great). This means the Drobo gets a lot more usage. Also it means that something interesting happens, the Drobo can choke my system on startup. Here's what I mean: Start computer without Drobo plugged in, CrashPlan and Drobo Dashboard services disabled: 105s Start computer with Drobo plugged in Crashplan disabled, Drobo Dashboard enabled: 250s (and 1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, CrashPlan and Drobo Dashboard disabled: 250s (1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, Crashplan and Drobo Dashboard enabled: 300s (1 cpu at 100% for a very long time, drobo churning) If I yank the USB plug on the Drobo the CPU usage goes down to nothing very quickly. The slow startup in the fourth scenario is because CrashPlan is trying desperately to load stuff up on the H: drive before it gives up, so I've disabled it for the time being. So here's my question: What the heck is going on when I plug the drobo in? I've fired up Process Explorer and see that the System process is hogging the CPU, specifically it's an ntoskrnl.exe/KdPollBreakIn thread that's going ape. Is this something that's wrong with Drobo? Windows? Any idea on how to find out? If it matters, here's tech info: Athlon 64x2 4400, 2GB RAM, Win7 Ultimate, Drobo USB (2x1TB, 2x320GB)

  Read the article

• Migrating from tomcat to tc server - receiving java.sql.SQLException on startup

  - by user470184

  I'm receiving below error when I start tcServer. I do not receive this error on standalone version of tomcat. Is there extra config I need to add for tcServer ? WARNING: Unexpected exception resolving reference java.sql.SQLException: Io exception: The Network Adapter could not establish the connection at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387) at oracle.jdbc.driver.PhysicalConnection.(PhysicalConnection.java:441) at oracle.jdbc.driver.T4CConnection.(T4CConnection.java:165) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801) at org.apache.tomcat.jdbc.pool.PooledConnection.connectUsingDriver(PooledConnection.java:277) at org.apache.tomcat.jdbc.pool.PooledConnection.connect(PooledConnection.java:182) at org.apache.tomcat.jdbc.pool.ConnectionPool.createConnection(ConnectionPool.java:699) at org.apache.tomcat.jdbc.pool.ConnectionPool.borrowConnection(ConnectionPool.java:631) at org.apache.tomcat.jdbc.pool.ConnectionPool.init(ConnectionPool.java:485) at org.apache.tomcat.jdbc.pool.ConnectionPool.(ConnectionPool.java:143) at org.apache.tomcat.jdbc.pool.DataSourceProxy.pCreatePool(DataSourceProxy.java:116) at org.apache.tomcat.jdbc.pool.DataSourceProxy.createPool(DataSourceProxy.java:103) at org.apache.tomcat.jdbc.pool.DataSourceFactory.createDataSource(DataSourceFactory.java:539) at org.apache.tomcat.jdbc.pool.DataSourceFactory.getObjectInstance(DataSourceFactory.java:237) at org.apache.naming.factory.ResourceFactory.getObjectInstance(ResourceFactory.java:140) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304) at org.apache.naming.NamingContext.lookup(NamingContext.java:793) at org.apache.naming.NamingContext.lookup(NamingContext.java:140) at org.apache.naming.NamingContext.lookup(NamingContext.java:781) at org.apache.naming.NamingContext.lookup(NamingContext.java:153) at org.apache.catalina.core.NamingContextListener.addResource(NamingContextListener.java:1028) at org.apache.catalina.core.NamingContextListener.createNamingContext(NamingContextListener.java:637) at org.apache.catalina.core.NamingContextListener.lifecycleEvent(NamingContextListener.java:238) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:142) at org.apache.catalina.core.StandardServer.start(StandardServer.java:747) at org.apache.catalina.startup.Catalina.start(Catalina.java:595) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414)

  Read the article

• Office 2007 constantly crashes, logged as Event ID 1000

  - by Nori

  I have a user, who despite my best efforts, is having constant Office 2007 crashes. I've tried deleting their profile and setting it up again, repairing office, uninstalling completely and then reinstalling, and swapping out memory sticks. One event log error I keep getting is the following: (note all the Office errors are event id 1000) Faulting application name: OUTLOOK.EXE, version: 12.0.6539.5000, time stamp: 0x4c12486d Faulting module name: EMSMDB32.DLL, version: 12.0.6539.5000, time stamp: 0x4c1246f8 Exception code: 0xc0000005 Fault offset: 0x0005d8e2 Faulting process id: 0xf6c Faulting application start time: 0x01cb6633f33384f3 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE Faulting module path: c:\progra~2\micros~1\office12\EMSMDB32.DLL Report Id: 0d4a2eab-d231-11df-80a0-4061868f5d10 I also get this: Faulting application name: OUTLOOK.EXE, version: 12.0.6539.5000, time stamp: 0x4c12486d Faulting module name: olmapi32.dll, version: 12.0.6538.5000, time stamp: 0x4bfc6ad9 Exception code: 0xc0000005 Fault offset: 0x002357a9 Faulting process id: 0x5e4 Faulting application start time: 0x01cb661f4546aa77 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE Faulting module path: c:\progra~2\micros~1\office12\olmapi32.dll Report Id: a4a90658-d224-11df-80a0-4061868f5d10 The Excel error is this: Faulting application name: EXCEL.EXE, version: 12.0.6535.5002, time stamp: 0x4bd2a7f1 Faulting module name: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdbdf Exception code: 0xe06d7363 Fault offset: 0x0000b727 Faulting process id: 0x14a8 Faulting application start time: 0x01cb61ab7bc0abab Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE Faulting module path: C:\Windows\syswow64\KERNELBASE.dll Report Id: ba0c454b-cd9e-11df-80a0-4061868f5d10 Also have gotten this for PowerPoint: Faulting application name: POWERPNT.EXE, version: 12.0.6500.5000, time stamp: 0x49a68f9d Faulting module name: COMShim.dll, version: 2010.3.325.110, time stamp: 0x4c51e0b1 Exception code: 0x40000015 Fault offset: 0x0001e388 Faulting process id: 0x1480 Faulting application start time: 0x01cb5fe9a0660e81 Faulting application path: C:\Program Files (x86)\Microsoft Office\Office12\POWERPNT.EXE Faulting module path: C:\Program Files (x86)\FactSet\COMShim.dll Report Id: e03d2a21-cbdc-11df-9bc8-4061868f5d10 (Some of the above lines edited to keep you from scroll horizontally.) Lastly, I get this error several times a day, I don't think it is related but maybe it is: Failed extract of third-party root list from auto update cab at: http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab with error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file. Any ideas? This is driving me nuts.

  Read the article

• placing shell script under systemd control

  - by Calvin Cheng

  Assuming I have a shell script like this:- #!/bin/sh # cherrypy_server.sh PROCESSES=10 THREADS=1 # threads per process BASE_PORT=3035 # the first port used # you need to make the PIDFILE dir and insure it has the right permissions PIDFILE="/var/run/cherrypy/myproject.pid" WORKDIR=`dirname "$0"` cd "$WORKDIR" cp_start_proc() { N=$1 P=$(( $BASE_PORT + $N - 1 )) ./manage.py runcpserver daemonize=1 port=$P pidfile="$PIDFILE-$N" threads=$THREADS request_queue_size=0 verbose=0 } cp_start() { for N in `seq 1 $PROCESSES`; do cp_start_proc $N done } cp_stop_proc() { N=$1 #[ -f "$PIDFILE-$N" ] && kill `cat "$PIDFILE-$N"` [ -f "$PIDFILE-$N" ] && ./manage.py runcpserver pidfile="$PIDFILE-$N" stop rm -f "$PIDFILE-$N" } cp_stop() { for N in `seq 1 $PROCESSES`; do cp_stop_proc $N done } cp_restart_proc() { N=$1 cp_stop_proc $N #sleep 1 cp_start_proc $N } cp_restart() { for N in `seq 1 $PROCESSES`; do cp_restart_proc $N done } case "$1" in "start") cp_start ;; "stop") cp_stop ;; "restart") cp_restart ;; *) "$@" ;; esac From the bash script, we can essentially do 3 things: start the cherrypy server by calling ./cherrypy_server.sh start stop the cherrypy server by calling ./cherrypy_server.sh stop restart the cherrypy server by calling ./cherrypy_server.sh restart How would I place this shell script under systemd's control as a cherrypy.service file (with the obvious goal of having systemd start up the cherrypy server when a machine has been rebooted)? Reference systemd service file example here - https://wiki.archlinux.org/index.php/Systemd#Using_service_file

  Read the article

• Thin server : `start_tcp_server': no acceptor (port is in use or requires root privileges) (RuntimeError)

  - by Rubytastic

  My thin webserver fails to start with an error message. I can hardly find any information or leads on how to fix this, anyone an idea? thx Thin web server (v1.5.0 codename Knife) Maximum connections set to 1024 Listening on 0.0.0.0:9292, CTRL+C to stop /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:526:in start_tcp_server': no acceptor (port is in use or requires root privileges) (RuntimeError) from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:526:instart_server' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/backends/tcp_server.rb:16:in connect' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/backends/base.rb:55:inblock in start' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:187:in call' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:187:inrun_machine' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/eventmachine-1.0.0/lib/eventmachine.rb:187:in run' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/backends/base.rb:63:instart' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/thin-1.5.0/lib/thin/server.rb:159:in start' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/handler/thin.rb:13:inrun' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/server.rb:265:in start' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/lib/rack/server.rb:137:instart' from /srv/gamers/shared/bundle/ruby/1.9.1/gems/rack-1.4.1/bin/rackup:4:in <top (required)>' from /srv/gamers/shared/bundle/ruby/1.9.1/bin/rackup:19:inload' from /srv/gamers/shared/bundle/ruby/1.9.1/bin/rackup:19:in `'

  Read the article

• How can I systematically shut down Windows services in order?

  - by cbmeeks

  We have this open source application that has three (3) services. For the purpose of this question, let's call them A, B, and C. Now, they have to be shut down in a specific order. That order would be A then B then C. If B shuts down before A then we run into all kinds of problems. Same is true if C shuts down before B or A. Plus, each service can take a different amount of time to shut down due to how many users were using it. Oh, this need to be wrapped up in a DOS batch file or something a non-techy user could just double-click to initiate. (PowerShell is not out of the question but I've never used it). Also, I'm a C# coder so that could be used too. Anyway, when the restart is initiated the following needs to happen: 1) Initiate shutdown of service A 2) When service A is down, it should trigger the shutdown of service B 3) When service B is down, it should trigger the shutdown of service C 4) When service C is down, it should trigger the START UP of service A 5) When service A is UP, it should trigger the START UP of service B 6) When service B is UP, it should trigger the START UP of service C So as you can see, each stop/start needs to wait on the previous to be completely finished before moving on. And since each service can take a few seconds to a few minutes, we can't use any kind of timing tricks. Suggestions greatly appreciated. Thanks!

  Read the article

• Send Apache Access Logs to syslog

  - by Seer

  We have IBM HTTP Servers (Based on Apache 2.0) and want to send the access logs to syslog. (in addition to error logs which does work) The config we are using is as follows: ErrorLog "|/HTTPServer/bin/rotatelogs /archive/http/error_log.%Y%m%d 86400 | /usr/bin/logger -t httpd -plocal6.err" LogLevel warn LogFormat "%h %{True-Client-IP}i %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %D \"%{Host}i\" %v" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog "|exec /usr/bin/logger -t ptseelm-ax3004 -i -p local6.notice" combined But the logs entries don't even appear in the local syslog.out here is what the processes look like: ps -ef | grep httpd apache 6226000 8388618 0 09:04:01 - 0:00 /HTTPServer/bin/httpd -d /HTTPServer -k start apache 6750220 8388618 0 09:04:01 - 0:00 /HTTPServer/bin/httpd -d /HTTPServer -k start apache 7602390 8388618 0 09:04:01 - 0:00 /HTTPServer/bin/httpd -d /HTTPServer -k start root 8388618 1 0 09:04:01 - 0:00 /HTTPServer/bin/httpd -d /HTTPServer -k start root 9044038 8388618 0 09:04:01 - 0:00 /usr/bin/logger -t httpd -plocal6.err So there is no logger attached to the child processes... is that the problem? Can someone help me out? :) We have the following in syslog.conf: local6.* @somerealipaddress

  Read the article

• MySQL unstable behavior with external stroge

  - by onurozcelik

  In our project we are using MySQL 5.0.90(InnoDB engine) server with an external storage. We store MySQL data files in an external storage. When the external storage down for a reason we have unstable behaviours. So we made some tests. In Windows Server 2008 We closed external storage physically. MySQL service stoped and we could not reach the server. Then we opened the storage unit and we could not start service until we reconfigured MySQL. We made storage unit offline from operating system. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online and we could start the service(not automatically). In Windows Server 2003 We made storage unit offline. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online we could not start the service until we reinstalled MySQL. Before reinstall we tried to reconfigure but it did not work. We closed external storage physically. MySQL service stoped and we could not reach the server. After that we opened the storage unit and we could start service(not automatically) We expect service to autostart after storage unit is online/open. But these tests show unstable behaviors. Is there any solutions to this.

  Read the article

• How to create partition when growing raid5 with mdadm.

  - by hometoast

  I have 4 drives, 2x640GB, and 2x1TB drives. My array is made up of the four 640GB partitions and the beginning of each drive. I want to replace both 640GB with 1TB drives. I understand I need to 1) fail a disk 2) replace with new 3) partition 4) add disk to array My question is, when I create the new partition on the new 1TB drive, do I create a 1TB "Raid Auto Detect" partition? Or do I create another 640GB partition and grow it later? Or perhaps the same question could be worded: after I replace the drives how to I grow the 640GB raid partitions to fill the rest of the 1TB drive? fdisk info: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xe3d0900f Device Boot Start End Blocks Id System /dev/sdb1 1 77825 625129281 fd Linux raid autodetect /dev/sdb2 77826 121601 351630720 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xc0b23adf Device Boot Start End Blocks Id System /dev/sdc1 1 77825 625129281 fd Linux raid autodetect /dev/sdc2 77826 121601 351630720 83 Linux Disk /dev/sdd: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x582c8b94 Device Boot Start End Blocks Id System /dev/sdd1 1 77825 625129281 fd Linux raid autodetect Disk /dev/sde: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xbc33313a Device Boot Start End Blocks Id System /dev/sde1 1 77825 625129281 fd Linux raid autodetect Disk /dev/md0: 1920.4 GB, 1920396951552 bytes 2 heads, 4 sectors/track, 468846912 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0x00000000

  Read the article

• Jenkins shell command isn't executing

  - by Dmitro

  In Jenkins project I add command for executiong rm /var/www/ru.liveyurist.ru/tmp/* But when I build project I get error: Started by user anonymous Building in workspace /var/www/ru.myproject.ru Updating https://subversion.assembla.com/svn/myproject/trunk At revision 1168 no change for https://subversion.assembla.com/svn/liveexpert/trunk since the previous build [ru.myproject.ru] $ /bin/sh -xe /tmp/hudson7189633355149866134.sh FATAL: command execution failed java.io.IOException: Cannot run program "/bin/sh" (in directory "/var/www/ru.myproject.ru"): java.io.IOException: error=12, Cannot allocate memory at java.lang.ProcessBuilder.start(ProcessBuilder.java:475) at hudson.Proc$LocalProc.<init>(Proc.java:244) at hudson.Proc$LocalProc.<init>(Proc.java:216) at hudson.Launcher$LocalLauncher.launch(Launcher.java:709) at hudson.Launcher$ProcStarter.start(Launcher.java:338) at hudson.Launcher$ProcStarter.join(Launcher.java:345) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:82) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:703) at hudson.model.Build$RunnerImpl.build(Build.java:178) at hudson.model.Build$RunnerImpl.doRun(Build.java:139) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:473) at hudson.model.Run.run(Run.java:1410) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:238) Caused by: java.io.IOException: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) at java.lang.ProcessImpl.start(ProcessImpl.java:81) at java.lang.ProcessBuilder.start(ProcessBuilder.java:468) ... 16 more Build step 'Execute shell' marked build as failure Finished: FAILURE I started Jenkins from root user. Please advise what can be reason of this error?

  Read the article

• No Homegroup Computers, Network Troubleshooter Fails

  - by Mokubai

  I have a problem with my Windows 7 Homegroup, between two Windows 7 Home Premium machines. On one machine I get this: The other machine in the Homegroup is perfectly happy and is able to see and browse this faulty machine as if there is nothing wrong. The Network and Sharing Center shows that I am joined to a Homegroup on my "Home" network and nothing is out of the ordinary. I have tried leaving the Homegroup and rejoining/recreating it several times and that does nothing at all. Normal browsing to machine names and looking through folders seems to work, but it's a much more clunky way to get stuff compared to the convenience of the Homegroup facilities. Starting the troubleshooter detects some problems with a "Peer Networking" (PNRpr or something like that) service not starting but fails to fix anything. Sure enough when I go to view the services via Control Panel - Administrative Tools - Services I see that both the "Peer Name Resolution Protocol" and "Peer Networking Grouping" services are stopped. Attempting to start the "Peer Networking Grouping" gives an error that a dependency service will not start, the only service it is dependant on is the "Peer Name Resolution Protocol" so I try to start that and I get an error saying that the "service could not start due to error 0x80630801" This has happened before and I have fixed it then by using System Restore and restoring the machine to a week before when I knew it had all worked. This time though I cannot remember when I last used the Homegroup from this machine and I've installed quite a bit so I don't want to go fumbling through restore points trying to find one that works... Can anyone tell me if there is a way to reset things so that this machine is able to use the Homegroup again?

  Read the article

• Mac OS X : Open up 3 terminals, run different commands from all for each of them, to set up a develo

  - by taelor

  I'm a Ruby on Rails Web Developer and there is a lot of repetition I go through to start up my development environment. I was wondering if there is any way that I can remove some of this repetition by writing a script, or using a program (like quicksilver) or something to get my work environment going. I know how to use quicksilver to open up terminal, and I even have a saved window group to get my 3 or 4 panes open. The next thing I would love to automatically happen is getting all three to goto a certain directory, and each run different commands. One will start the local server, and in another tab, start a background process. the other would open text mate, and then start a console session, while the last one runs a svn(or git) status. Oh yah, and I would love to go ahead and open firefox, and a few tabs going to a couple of locations. Does anyone have any suggestions on how I could make all this happen in once quicksilver command, or a double click on some type of script on my Desktop?

  Read the article

• What steps should I take to debug this non-starting hvm virtual machine?

  - by Ophidian

  I have a dom0 machine running CentOS 5.4 with all the latest updates using Xen as my hypervisor. I am using Xen in part because this machine was set up prior to KVM being included in RHEL, and in part because KVM's network bridging configuration is not nearly as simple as Xen's. The dom0 machine is headless and I do all of my VM management via virsh from the command line. I have two hvm domU's: A web server running CentOS 5.4 A mail server running Gentoo Both VM's are backed by LV's on the dom0 but do not use LVM in the domU. Both have virtually identical libvirt configurations (differing by expected things like name, UUID, NIC MAC, VNC port, etc). The web server domU (WSdomU hereafter) does not start since applying the most recent kernel update (kernel-xen-2.6.18-164.15.1.el5.x86_64 and kernel-2.6.18-164.15.1.el5.x86_64 for the dom0 and WSdomU respectively). By 'not start' I mean it appears to be running but it does not use an CPU cycles, does not bring up a graphical console, and does not respond on the network. The WSdomU is listed as no state rather than the normal running or blocked in xentop. The mail server domU starts fine and functions normally. Here are the steps I have taken so far that did not solve the problem: Reboot the dom0 to see if things come up on their own Check xen dmesg on dom0 Check xend logs (a cursory viewing did not show anything blatant; specific suggestions of things to look for would be appreciated) Attempted to connect to the WSdomU's graphical (VNC) console from the dom0 Shutdown the mail server domU and attempt to start the WSdomU Check the SELinux labels on backing LV's (they're the same) Set SELinux to permissive and attempt to start the WSdomU Use virsh edit to try tweaking the WSdomU config virsh undefine, reboot, virsh define the WSdomU config dd the WSdomU LV to an .img file, copy it to my Fedora desktop and run it under KVM (works fine) What steps should I take next to debug this? I will edit in any additional configuration's requested in the comments.

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Mysterious Windows 7 slowdown problem

  - by cletus

  I have a fairly beefy machine: Intel Q9450 8GB DDR2800 (4x2) Intel X25-M G2 80GB SSD Several other hard drives Windows 7 Ultimate 64 In the last month I've gotten a mysterious slowdown problem. When I start my IDE (IntelliJ IDEA) it usually takes about 20 seconds on the SSD. If my machine has been on for a day or two (as far as I can tell this is the only pattern) and I try to start the IDE, it brings my machine to a halt. CPU usage goes up to 25% per core (so it's basically 100% usage) and it takes up to 5 minutes to start. Other things I've noticed: iTunes will start to skip and stutter (my music is running off a second hard drive). The only persistent things I'm running are: AVG Anti-Virus Spybot (the slowdown predates this) Hamachi and Murmur (again the slowdown predates this) Apple Airport Base Agent HP OfficeJet 8500 driver/manager The browser I use is Chrome. I can't think why that'd be relevant but it's always on so I thought I'd mention it. When this happens I can't see a reason for it in the process list. No CPU hogs. No spikes in IO activity that I can see. Basically I'm at a loss to explain it and need to reboot, at which point everything returns to normal (for awhile). FWIW the Intel SSD is about 75-80% full. I know being too full can really degrade performance. I don't believe that's the issue here. Does anyone have any ideas on what I can do to fix this or at least help find what's going wrong? This same machine (sans SSD) could run Win XP and stay up fine for a month or two.

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >