Search Results

Search found 45957 results on 1839 pages for 'super sonic'.

Page 303/1839 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

  • rs232 PTZ cameras software program for control

    - by Noel
    Does anyone know of a program that would allow you to control multiple IR cameras via usb (computer jack) to rs232 (camera hardware)? We have a cameraswitcher, very low key, that I can press buttons and it willswitch the view of the camera from one to the next. currently I control the cameras by sellecting the cameras via a remote control for change of angles. Does anyone know anything that could give me some ability to do manual controls via my computer?. Please Advise, thanks!

    Read the article

  • Debian amd64 on Dell Studio 540 reboot hangs

    - by Shcheklein
    Hi, I have Dell Studio 540 desktop and Debian Lenny installed on it: 2.6.26-2-amd64 #1 SMP Tue Mar 9 22:29:32 UTC 2010 x86_64 GNU/Linux The problem is that I can't reboot it. It just hangs after "Will now restart" message. I've already tried: reboot=b, reboot=a, reboot=h kernel options. Nothing helps. Additional info (I can provide any other information): dmidecode System Information Manufacturer: Dell Inc. Product Name: Studio 540 lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller 02:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. Device 2380 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)

    Read the article

  • Mounting ubuntu's root.disk in Windows 7

    - by gAMBOOKa
    I've got Ubuntu 9.10 installed in an NTFS partition. After an update, I started getting kernel panics, so I need to reinstall it. But before I do that, I need to retrieve and backup my home directory. I believe Ubuntu's file system is packaged in the root.disk image. So how do I mount it in Windows?

    Read the article

  • Connect iPad to windows 7 VPN

    - by Linuz
    My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

    Read the article

  • Sort results in Google.

    - by atch
    Guys is there a way to have results from Google displayed in predefined order? Like for example the newest at the top? Very often I'm looking for some new information on C++0x and I would like to have results sorted in that way. Thank you.

    Read the article

  • Error activating XKB configuration (Ubuntu 9.10)?

    - by Mohammad
    I'm absolutely new on Ubuntu. I was gonna learn Ubuntu, so I installed VMware 7.0.1 build-227600 on my Win7 x64, afterward I've installed Ubuntu 9.10 on it as a Virtual Machine. I just enabled root account, and when I log in as root for once, I received the following error : What's wrong with it? Am I miss something?

    Read the article

  • What is the safest way to create a boot sector on an existing system drive?

    - by zespri
    I have 2 drives in my PC one is primary master and used to be the system drive with windows XP installed. The second one is secondary and has Windows 7 installed that I'm using as the operating system. I want to decommission the old hard drive with XP and re-plug the Windows 7 one as the primary master so I could boot from it. What is the safest way for me to write the correct boot sector on the Windows 7 hard drive so I don't ruin my Windows 7 installation?

    Read the article

  • Force the computer to always use current display settings

    - by sazpaz
    So I'm having a terrible black screen problem with my new installation of Windows 8. The screen basically goes to black every time I turn it on or sleep, or connect to an external or monitor. I dont really know what steps actually cause the problem and cant seem to figure what steps allow the screen to come back, besides forcing restarts, going to sleep and waking up, and smashing Win + P. I have a strong feeling it's because the Switchable graphics I have (Intel HD + Radeon 5060), so I'm looking for a way to make the computer always use a specified mode (i.e the current mode I'm on, that does show stuff on the screen) and force it to use it everytime? Any ideas? EDIT: I've Installed all the latest drivers I've found. Tried most of the solutions around the web for this problem. Updated the BIOS to UEFI (from HP Support Assistant), etc. Laptop is an HP- Envy 14

    Read the article

  • MS Securily Essentials efficiency / usage, suspicious processes

    - by biggvsdiccvs
    I recently noticed that my (originally pretty fast) Windows 7 Pro laptop started getting slow and using a lot of CPU power for no apparent reason. A full scan by Microsoft Security Essentials revealed nothing. After some investigation, I found multiple instances of a strange process called urpev.exe and a couple of similar exe files sitting in subdirectories of Users//AppData/Roaming (this particular one was in a folder called Xyceowme). Description: "Mescrosift Visaal Studie 2010". Company name: "Mesrosift Corporatien". Is it a virus or something? :) Now, all of these exe files were scheduled to be started from the Task Scheduler by tasks with names like "Security Center Update - 1291373911" and similar. My user name was listed as the author of the tasks. I disabled the tasks, restarted the computer in safe mode and moved all of the exe files to quarantine for further investigation. All of this was done last night. I just scanned the files with Security Essentials again (not updated since yesterday) in the quarantine location and this time it found PWS:Win32/Zbot.gen!plock in urpev.exe (but not in the other exe files, which are most likely viruses, too). Category: Password Stealer Description: This program is dangerous and captures user passwords. Another strange process is browser.exe (not chrome.exe) by Google Inc., described as Google Chrome. I uninstalled Chrome but it's still there. It runs out of Users\\AppData\LocalLow\UIVoice\ToolMedium\browser.exe and if I move it in safe mode, it just reappears there, and multiple instances run. Needless to say, it I kill it, it just runs again. Couldn't see anything in Task Scheduler, but found a couple of references to it in the Registry Editor: HKEY_CURRENT_USER/Software/Microsoft/Internet Explorer/LowRegistry/Audio/PolicyConfig/PropertyStore/ HKEY_USERS/S-1-5-21-1685709306-872053864-2599010960-1002/Software/Microsoft/Internet Explorer/LowRegistry/Audio/PolicyConfig/PropertyStore/ Maybe it's a legit process, but seems kind of strange. For the time being, I suspended the process and killed all of the child processes when I booted up the laptop. I used Security Essentials to scan the system periodically, but obviously it's not effective at least against one virus. I had the "real-time protection" turned off. Would it help if it were turned on and how much of a nuisance would it be? I wonder if there is a better alternative to Security Essentials. Over the years I've used multiple antivirus products at home and especially at work and was not very happy with any of them. Apparently, asking for software recommendations or comparisons is taboo here, but I will mention that I installed Malware Bytes and it was able to find an quarantine a bunch of suspicious files, and at least some of which were truly infected, but when it scans the bogus security center update executables from Mesrosift Corporatien, it finds nothing wrong. Also, any thoughts on the browser.exe mystery? Neither MS Security Essentials nor Malware Bytes found anything wrong with that file. However, after I ran a Malware Bytes scan and quarantined everything it found suspicious and rebooted the laptop, the process did not run.

    Read the article

  • Weird connectivity issue wtih USB Wifi stick.

    - by Carlos Nunez
    Hi, all! I'm not sure if this is the appropriate place to throw this question out there, but I'll give it a shot. I'm setting up two PCs, and I've been having massive troubles getting a USB wireless dongle working. I have two Sony VAIOs (Windows XP, SP2) that I found second-hand, and since they will be in a location too far to connect by Ethernet (no, can't do patch panels here :p), I need to connect them by wireless. Easiest and cheapest way to do that at the moment is by using two USB wireless sticks that I've had for a while, but never used. One of the computers is using a SMC-manufactured card, whereas the other is using a Belkin F5D7050. The box with the SMC card can see and authenticate with my router just fine, and has no problem obtaining a DHCP lease. The box with the Belkin, on the other hand, isn't so lucky. While it can see my router and associate with it, it will not obtain a DHCP-issued address. Worse, when I assign a static IP address to the NIC, it can ping the entire network and access the internet (meaning it can authenticate with the router), but no computer can ping to it UNLESS that computer pinged the computer that's pinging it first. Confused? Well, so am I. Has anyone had this issue before? Is this just a sign of a bad card? (For the moment, I have it connected by Ethernet, as I haven't moved it yet. However, this will be a problem when I set it up in its new home later.) Thanks! -Carlos Nunez

    Read the article

  • Watermarking FLV videos on Ubuntu

    - by sharjeel
    I wanna add support of watermarking on my FLV videos. Previously I used to do that using FFMPEG's vhook option but due to some problems I had to upgrade it to the latest svn revision. This version of FFMPEG doesn't have vhook support anymore. I have tried mencoder with bmovl but mencoder seems to be pretty difficult to work with. Is there any other feasible option of watermarking FLV videos?

    Read the article

  • Shell Script if else

    - by user34104
    #!/bin/bash echo "Int. a number" read num1 echo "Int. another numer" read num2 if ["$num1"="$num2"]; then echo "Equals" else echo "Dif" fi if["$num1"<0]; then echo "The number $num1 is negative" else if ["$num2"<0]; then echo "The number $num2 is negative" fi # this code is not working, i've something wrong when i see if the number is < 0. thanks

    Read the article

  • BIOS corrupted? How to proceed? Acer Travelmate 290

    - by dtlussier
    I have a older ACER Travelmate 290 (manufactured in 2002 or 2003), which I recently tried to upgrade to Ubuntu 9.10. After doing the upgrade process it appeared as if I had a problem with my x server configuration, as on the first reboot post-install I heard the Ubuntu startup sound, but had a black screen. I thought I would then reboot again to drop down into text-mode to trouble shoot the x configuration problem. However, when I tried rebooting, something went wrong and since then when I start up the machine I get absolutely nothing except the first hardware check (i.e. HDD light flashes, CD/DVD drive spins, etc.). Other than that the screen remains totally black and I have no HDD or processor activity at all. I have tried restarting it a number of time holding down all kinds of key combinations to try and coax it into the BIOS (if possible) with no luck. I have also tried putting in both a live Linux disc and a Windows install disk without any luck. With a disk in the drive it will spin for a few seconds and then stop. All this has lead me to suspect that the BIOS is somehow corrupt (not sure about the right terminology). I have tried putting a new BIOS image and installer program downloaded from ACER on a USB key to see if it will run when I start up the machine, but no luck. I'm not sure if this method of interacting/updating/flashing the BIOS will work outside of Windows/DOS as both OSs are mentioned kind of ambiguously in the documentation. I have also taken the laptop case apart and inspected the various cards and cannot find any obviously burned out components. I'm not sure how to proceed at this point in terms of components to try, or how to try and load a new BIOS image onto the board. Any advice here would be great, especially from those with experience with this particular line of laptops. Thanks!

    Read the article

  • Can I use plain RAID on a Drobo?

    - by cringe
    I'm thinking about a RAID device and the Drobo is on top of my list (followed by the WD ShareSpace). But I don't want to be in another walled garden with Drobos BeyondRAID technology. Can I use the Drobo with a plain RAID setup? So I can take my HDDs and connect it to another RAID controller and go on?

    Read the article

  • Colors differ in the dual monitor

    - by becomingGuru
    I use a dual monitor. The colors appear entirely different on the new monitor than they do on my laptop. When you are selecting colors etc, to be included in a website design, it totally freaks me out. Is there no software solution that finds how the settings of one of the monitor is and puts that to the second one? Otherwise what all settings do I need to change manually on the second monitor to make it appear as it does on the laptop? Thanks in advance.

    Read the article

  • Slower than expected 802.11n wireless network speeds

    - by Ian
    I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

    Read the article

  • git/gitolite: big git repo with several mini projects

    - by Jay
    I'm pretty new to the whole version control thing, and even more so with git. I recently installed git on my computer(s) and set it up on a NAS server. However, I have several client folders with several project folders per client folder. Each one of these client folders is a giant repo, encompassing every project inside it. What I'm wondering is, is there a way to break this apart? So, for instance: The NAS is my 'origin', and has gitolite installed On computer1 I have every project folder in a client folder ever created (clean branch), In computer2 I do not a new checkout of the client branch (because all the projects in that branch are all completed and I don't need a working copy of it), but I do have a brand new project folder for that client "newproject". Is there a way to commit and push to the NAS repo from computer2? Or perhaps is there a better way of organizing all this?

    Read the article

  • setting default permissions for each folders & files in mac osx

    - by sagar
    Suppose, I have created a new folder. By default, there is "no access" to every one. By default, to other "read only" to other users. and only owners have "read & write" access to folders. But I want to apply the "read & write" access for each user to new created folders & files by me only ? How is it possible ? Thanks in advance for sharing your knowledge. Sagar.

    Read the article

  • Gateway GT5220 Boot/POST Failure

    - by John Rudy
    I have a Gateway GT5220 I'm troubleshooting. It is, in fact, the machine I just gave my father for his birthday a couple months ago. (Prior to that, it was my home PC. My home PC is now the MacBook on which I'm writing this.) Before going any further, I suspect that the answer will be, "It's worse than that, it's dead, Jim, it's dead, Jim, it's dead, Jim." At least, mobo and/or CPU. The initial symptoms were as follows: Turn on power All fans fire up (thus making it so I can't hear if the hard drive is spinning or not, nor are my hands sensitive enough anymore to feel it) No LEDs remained lit on the front panel. (Initially, the hard drive indicator flashed briefly.) No beep, no video, no nothing. Following some advice I found here, I tried to "drain the stored power." After following those steps, the new symptoms were: Turn on power All fans fire up The front panel LEDs remained lit! After about 20, maybe 30 seconds, we had video! Sort of. We got to the Gateway splash/POST screen, which appeared thoroughly corrupted. How corrupted? Well, I imagine it's what a POST screen would look like after reading the wrong passage out of the Necronomicon: It stayed there. I gave it at least 5, maybe 6 minutes, and it didn't move. So I shut her down, started her up again, and now (this is where we currently stand, symptomatically) we have this: Turn on power All fans fire up The front panel LEDs remain lit No video, no beep, no nothing. I'm a software guy; haven't done real hardware troubleshooting in years. My gut tells me that the mobo and/or CPU is fried, and unfortunately my gut didn't get to be as big as it is being wrong all the time. :( In addition to the link above, I have read all of the following (trying to save you some LMGTFY trouble): Gateway Support POST Error Messages and Handling About a zillion (useless) POST beep code sites A kioskea.net post indicating that most likely we're at what I consider "total loss" (mobo and/or CPU) My questions: Are there any conditions other than mobo/CPU that could cause symptoms like these? Is it worth my time to try the next hardware troubleshooting step?(IE, remove all non-critical hardware from the machine, try to boot, systematically replace one by one until we find the failing component) Which mobos will fit in the Gateway GT5220 case (with rear ports correctly aligned)? (Why this is not a dupe: I wouldn't have posted this question if it hadn't been for the funkadelic possessed video display on the one occasion we got video out. I think that justified this not being an exact dupe. Of course, if the community overrules, I will understand.)

    Read the article

  • Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

    - by Sid
    I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

    Read the article

  • Windows 2012 Server: Enable .NET 3.5

    - by Meengla
    I have a Windows 2012 Server which needs .NET 3.5 installed. For background info/solutions, please see this: http://sqlblog.com/blogs/sergio_govoni/archive/2013/07/13/how-to-install-netfx3-on-windows-server-2012-required-by-sql-server-2012.aspx I have tried this but it doesn't work for me. Here is what I am trying: Using a Windows 2012 ISO file, 'mount' on the 2012 Server as 'D' drive and then tried both GUI and Command prompt. In case of GUI, I specified the 'alternate source' path to the D drive's 'source/sxs folder but that failed without giving enough info. In case of the command prompt, here is what's happening: dism /online /enable-feature /featurename:NetFx3 /source:d:\sources\sxs I get error: Installed but Parent feature not enabled. So I tried another approached: dism /online /enable-feature /featurename:NetFx3 /all /source:d:\sources\sxs the above command, per http://blogs.technet.com/b/askcore/archive/2012/05/14/windows-8-and-net-framework-3-5.aspx is supposed to enable parent elements; but running this I get error like 'source not found'. Is there some error in my second command? What else I could do? This is Windows 2012 Server Standard edition. Thanks!

    Read the article

  • Are HDMI to VGA Adapters Really Device-Specific?

    - by allquixotic
    There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

    Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >