Search Results

Search found 13401 results on 537 pages for 'double checked'.

Page 305/537 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• Downloads speed starts ok but after a few seconds they go down to 10kbps?

  - by peterg

  Since yesterday any file I try to download from any host start downloading ok (at 1mbps) but after a few seconds the speed start to decrease down to 10kbps. I use a mobile modem (huawei) and I connect to a wcdma network. What could be happening? I use kaspersky, and I checked the Network Monitor and I don't see any weird process using bandwidth. What other tests can I run? Recommend me some app to monitor the traffic to see if I have some malware or see where my bandwidth goes.

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• Cannot add Windows 7 client to SBS 2008

  - by Sandokan

  I have just installed SBS 2008 R2 Standard on VMware Workstation 9 along with Windows 7 Pro N. Both are activated and running fine. I have followed the steps to configure SBS 2008 and am now at the point where I'm to add a computer to the domain. Here is where the problem begins. I have gone through the steps of using the webinterface. On the client I downloaded Launcher.exe. I then run it and get the error "Check computer requirements - Failed" (translated from swedish): "This computer doesn't reach the requirements for connecting to the network." "The computer doesn't reach the maximum requirements for the operating system with regards to connect to the network" The provided link for More information only leads to a general supportpage and doesn't handle this specific error. I have also checked the time settings and they are correct. Any clue as to what this problem could be?

  Read the article

• "System call failed" error when trying to open "My Computer" etc. under the Start menu! What is happening?

  - by verve

  When I go to the start menu I can load program icons but if I click on Documents, My Pictures, My Computer, Default Programs...all the options on the right part--I get "System call failed". How do I solve ths? Is my HD failing? Also, I don't know if it's connected but yesterday my uTorrent stopped working in a way it has never done before. I'm not able to download torrent files. In the program I get "socket unreacheable..." Also, for the last 2 days my internet has been super-slow. I checked Kaspersky for viruses. It says: "No active threats". Windows 7 64-bit.

  Read the article

• Broadband Traffic Question

  - by rutherford

  I have a broadband ADSL line with plus.net in the UK. Having checked the modem there is no firewall or any weird features enabled. But since I arrived at the apartment (the broadband already being installed), I cannot log into Twitter nor update any of my wordpress blogs (I can browse them and log in, but cannot save any edits or new posts). It only seems to affect these two sites in their unique ways. If I take the netbook I use in this place out to say a McDonalds or some other wifi access point then these sites work fine again. Anyone know what could possibly be preventing access of the pages in question? The only thing common to these pages are the POST response they are expecting. But POST form submission works fine on other sites...

  Read the article

• Is memcached pre-installed with Xcode on OS X?

  - by GeneQ

  The answer seems to be yes, according to Apple's documentation. To make sure I'm not hallucinating, I checked Apple's developer tools documentation. Yes, memcached is supported and documented by Apple: Apple Developer Library : memcached(1) Apparently, memcached is installed with Xcode since at least 10.6 onwards. The reason I'm asking this is that on the Web and on SO there are lots people asking how to install memcached on OS X but curiously no one seems to mention that the easiest way to do so is to simply install Xcode via the AppStore (or using a DMG). All the answers given involves using homebrew or some other complicated way to install memcached from source. Is there any compelling reason why the Apple shipped memcached is not good enough? I don't see any advantages of compiling and installing memcached from source since there's an Apple supported version.

  Read the article

• Windows 7 - Explorer fails to load with UAC enabled

  - by mfranklin

  While running an InstallShield based installer, my Windows 7 machine became unresponsive. After forcing a reboot, I can log in to the system, but explorer does not run. I can log in as a different user without issue and when I change modify UAC to its lowest setting, I can log in as the user that was performing the install. However, if I re-enable UAC, I am unable to get explorer to run again on login. I have checked the HKCU\Software\Microsoft\Windows\CurrentVersion\Run and RunOnce, but don't see anything that isn't configured to run in the user that I can successfully log in as. I completed the installation of the software as the "good" user without issue.

  Read the article

• Messages Disappeared from Outlook Sent Folder

  - by Bryan

  Two days ago almost all of the messages in my Microsoft Outlook sent folder disappeared. I say "almost all" because only the messages from the past 2 weeks remain. This led me to believe that they must have been "auto archived," but I can't find an archive file that contains my messages. I've checked the folder where Outlook says it archives messages, but there's not much there. I've changed my settings to prevent Outlook from auto-archiving my messages in the future, but still need the ones that have disappeared. Can anybody help me find my missing messages?

  Read the article

• Server error at large posts

  - by Shirko

  On a large drupal site, the database server is on a separate server connected directly to the web server. The web server uses apache and memcached. The problem is that whenever the post is a large, say larger than 10KB, the server does not return correctly. I checked both apache and mysql logs but could not find any trace of errors being logged. The error happens also when I use nginx/php5-fpm instead of apache. Despite this, the large posts are registered, however incorrectly so that they show up for admin when I open a new page on the site. I'm really confused and appreciate your hints to pinpoint the possible sources if this chronic problem.

  Read the article

• dig gets the right result from DNS server, but name still fails to resolve

  - by EMiller

  Under what conditions would the following occur? From a given OSX machine on an internal network: $~ cat /etc/resolv.conf nameserver 10.102.120.7 nameserver 10.102.120.2 From the same machine: $~ dig @10.102.120.7 in.local <snip> ... ;; QUESTION SECTION: ;in.local. IN A ;; ANSWER SECTION: in.local. 43200 IN A 10.102.123.30 <snip> ... And yet, this workstation cannot ping in.local, nor load pages hosted by apache on that machine. 10.102.123.30 is definitley up (2 OSX machines I know fail to resolve in.local - but other machines on the network can). I have also checked their /etc/hosts to see if anything there might interfere... Not sure what else to check...

  Read the article

• How to accelerate and notice failure of potentially faulty disks

  - by rainier

  Hey, I got a bunch of 'used' servers, whose disks should have been checked, but they have been shipped around the county in crate which can't help. I just had one disk go bad (despite being mirrored, currently trying to get more details). The server was fine for about a week before everything ground to a halt this afternoon. Is there any way 'accelerate' the failure of faulty disks, with the goal of bringing the disk to failure before we launch production services? Would doing lots of I/O with 'dd' or 'iozone' be a good way to test these potentially faulty disks? Any other tests/tools that would help recognized failures before they happen?

  Read the article

• New power supply and now HDDs are not recognized

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Booting ubuntu from usb hdd: GRUB menu not shown

  - by emanemos

  Hello, could anyone help me to boot ubuntu-9.04 from usb hard disk? This disk contains /boot primary partition. During ubuntu installation I used "Advanced" button and asked to install GRUB to the /boot partition. Later I checked whether GRUB files are really present in this partition. They are. However, I get stuck while trying to boot. The boot menu ("ubuntu generic version", "ubuntu recovery mode", etc...) is not shown. Instead I am thrown to GRUB minimal bash-like version. I feel at a loss and have no idea why I am pointed to this minimal version. Can anybody prompt me what to do?

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Can't install Ubuntu 12 into VirtualBox (USB not recognized, ISO would not boot)

  - by wvxvw

  I'm trying out VirtualBox 4.18 and wanted to install Ubuntu 12 as a test. After installing VirtualBox (on Debian squeeze/sid), creating a virtual machine for Ubuntu and pointing it in Settings Storage IDE Controllers to the ISO with the proper version of Ubuntu, checked the "Live CD" option. Tried to define the IDE as master / slave, primary / secondary - all to no effect, and trying to boot this system, I'm getting to the screen which says: FATAL: could not read from the boot medium! System halted I've copied the same ISO to the USB stick, and I can boot from the USB (outside VirtualBox). I've looked at couple of tutorials / walk-through, there's nothing I can see that I would've done wrong. So, how would I configure it to boot from the desired ISO? Below is the snapshot with the current settings (sorry, I don't know how to get them as text).

  Read the article

• Windows 8 not booting from DVD while trying to install in a Ubuntu 14.04 system

  - by Tom

  Currently my system runs on Ubuntu 14.04. Yesterday, I deleted and formatted the partition(C drive) as NTFS in which Windows 7 was installed because Windows 7 was not booting for more than a week. I have a Windows 8 disk and it was able to boot from that disk when there was Windows 7 on my system. After the formatting of C drive yesterday, I tried to install Windows 8 by booting from the disk. Unfortunately, this time no booting happened from the disk. So I pressed F2 during the system start up and checked Boot Device Priority, Optical Drive has the first priority there. So why Windows 8 didn't boot from the disk ? I need to install Windows 8 too in my system without doing any damage to Ubuntu 14.04. How can I do it ?

  Read the article

• How to recover Windows Vista product key?

  - by empi

  Two years ago I've bought asus laptop with Windows Vista preinstalled. I also received recovery dvd with it. Now, I want to reinstall Windows and fully format the hard drive. However, the sticker with Windows product key under the laptop is unreadable. I tried recovering the key with ProduKey and similar software but they show another product key - it is different than the one from the sticker (I checked on another asus laptop and on my dell laptop). Do you know if I it is possible to reinstall the operating system with the product key obtained from ProduKey? If not, how can I retrieve the product key? It seems stupid that it was only placed on the sticker that is destroyed after some time if you frequently hold the laptop on your lap. I've tried ProduKey and Recover Keys and they show the same key. However, it's not the one from the sticker. Thanks in advance for help.

  Read the article

• Lots of files being used by blank web page. What are they?

  - by byronyasgur

  I am trying to optimise a website and I was using the network waterfall facility in Google Chrome. When I looked at the results there were lots of files which I didnt recognise. I first thought they might be something to do with Google Chrome itself, so I put a blank HTML file on my desktop and checked but there was nothing in the waterfall except the file itself. So I put a blank file on my server and I got the output below. What are all these files, are they all necessary, is this normal and do I need to be in any way concerned. My hosting provider has always been excellent in every regard that I'm aware of. My host is shared hosting, using cpanel and is based on a LAMP server. I also note that a couple of those file have problems but I have no idea how to fault find that or whether it's a concern. EDIT: I have cleared the cache so I don't think it's a browser cache issue.

  Read the article

• How can we tell what driven the Private bytes spiking.

  - by ronin

  I have websites running on .Net Framework 2.0 environment. For recent every day my website becomes slow at certain time and I need to recycle my app pool. I checked the log file found that the private bytes will spike during that time slot. Through some research I already know that the managed code and unmanaged code consists of Privates and we can identify which one cause the spike based on "Bytes in all heaps" counter. But I can't find a way to dig deeper. Is there any way that I can find out what driven my private bytes spike? How can we see what the private bytes are being used for? Thanks, Ronin

  Read the article

• Can a Linux system crash cause network issues?

  - by Supratik

  I have a Ubuntu box in my network which crashed, all the system connected to the switch in which the Ubuntu system was connected started giving problem. I removed that system from the network, since that was the last change I made in my network and everything was fine. So, to confirm this I again connected the system back to the network and the same network outage happened. When I checked the links it was fine. When I rebooted the problematic system and again connected back to the network switch everything started working. I think possibly the crash of the Ubuntu system could have caused this outage. Is there any possibility that a kernel crash can cause network issues?

  Read the article

• Windows: Is there something to see and remotely control single(!) windows on a remote PC?

  - by Horst Walter

  Is there something where I can see and control single(!) windows of PC1 on PC2 remotely. Basically like it is possible with X-Windows. I am not talking / asking about A software which displays the whole desktop remotely (like VNC, Windows RDP). A X-windows server for windows, to connect to Linux. The answer here ( Windows Remote Desktop Connection for just a single window (or a single program) ) requires Windows Server 2008. I need to run this on two Windows 7 machines. Example: PC1 shows three windows, and I transfer, see, and control window 2 on PC2. -- Edit -- I have checked whether there is an X-Server for Windows <- Windows. But there seems not to be one other than Unix <- Windows: http://stackoverflow.com/questions/40453/what-is-a-good-and-free-x-server-for-windows

  Read the article

• Using Hamachi VPN to connect to Linux VM at home

  - by Cameron Verotti

  I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

  Read the article

• Access requires a username and password

  - by articles

  Access requires a username and password Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection) I am getting this above message. I have hosted a website in godaddy hosting space. But when i run it.. it is prompt for User name and Password (above message). I am not using windows authentications in my website.... Moreover, i have test my website code on testing server....it never prompts for this message unless Integrated Windows Authentication is checked. Any help is appreciated.. Thanks

  Read the article

• how to set up domain name, bad request invalid hostname

  - by user45645

  assume i have a domain name which will be forwarded to my public ip (web server) automatically. in IIS 6, ip is public ip port is 6666, advanced - host value is www.hello.com firewall is open for 6666(web server port) and 53(DNS port), DMZ of router is my physical address in DNS, i have already had a zone called oldhello.com. And i expect a new domain name. So i have addded a new zone called hello.com and checked SOA server (P) is one.hello.local. then added a new host called one, full name is one.hello.com, ip address 192.168.7.3(my address in router) and then add a alias(CNAME) www, full name is www.hello.com, FQDN i choose the host i added before (one.hello.com) i expected that when i type the public ip in browser, can it be changed to domain name automatically. if not set host value www.hello.com, use public ip i can see the web however, after set up host value www.hello.com, browser show bad request invalid hostname

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works f

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >