Search Results

Search found 13401 results on 537 pages for 'double checked'.

Page 306/537 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Issue about mapping MAC address to Ipv6 address

  - by deepsky

  I know that the address in ipv6 with prefix range 001 to 111 should use a 64-bit interface identifier that follows the EUI-64 format, which translates the MAC to ipv6 as below. MAC:00-02-b3-1e-83-29 --> 02-02-b3-ff-fe-1e-83-29 --->ipv6 addr: fe80::202:b3ff:fe1e:8329 Then I checked my network status with ipconfig /all on my windows XP, but it seems my ipv6 address doesn't follow the above rule: MAC:00-24-81-XX-XX-XX ipv6 addr:2001:da8:8006:225:0:24:81XX:XXXX Obviously it doesn't follow the EUI-64 format. Instead it just directly use the MAC as the last 8 bytes. Anyone know the reason? Pls Correct me if I am wrong.

  Read the article

• SBS 2008 File access restrictions after 5:30PM

  - by Moif Murphy

  Hi there, SBS 2008, I have an issue whereby a user can't access a file after 5:30PM. They get the message: "cannot be accessed. The file may be corrupted, located on a server that is not responding, or read only I've checked the logon hours on the AD User account in question and there's no restrictions there. I have noticed that the account in question does not appear in the SBS Console, only in ADUC which means the account wasn't added using the wizard. It's a long shot but would that make a difference? Other than that I'm pretty stumped, any suggestions welcomed. Thanks

  Read the article

• Windows 7 Pro x64 suffering from insomnia

  - by gemisigo

  My Win 7 Pro x64 is unable to enter sleep mode. Pressing the sleep button results in strange state where the computer starts entering the sleep mode, the display is turned off but then the whole process stops, it does not switch off the hdd, the keyboard still responds to numlock/capslock, but the display does not on anymore. I have to cut power and restart. If I remove everything (wireless mouse, external hdd, usb hub, etc.) it does enter sleep mode, but if there is something left, it does not, though every one of them has "Allow the computer to turn off this device..." checked and "Allow this device to wake the computer" unchecked. Why does it not work? It was working properly in the RC.

  Read the article

• cdrom drive doesn't work on laptop

  - by bozdoz

  Here's as best as I can describe it: When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time. In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer. In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount. If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.

  Read the article

• Cannot install wireless lan service on windows 2012 RTM offline

  - by user1763118

  I'm having trouble installing the wireless lan service offline with a fresh installed windows 2012 server RTM. I tried "install-windowsfeature wireless-networking" in the non-gui mode and using the server manager in the gui mode to enable the wireless lan service, but both of them show a "failure configuring windows updates" message after the installation restarted the system. I checked the event log and I think messages about "The WLAN Autoconfig service depends on the following service: nativewifip. This service might not be installed" are the source of the issue. Google shows it is a service called "native wifi filter", but I cannot find anywhere to install that service. I don't have a Ethernet adapter for that computer, so have to install everything offline before the wifi's working.

  Read the article

• Windows XP, have to use ctrl+alt+delete to log on as local administrator

  - by wickedj

  Hey, I have a weird issue, a user was was logging into a laptop using the local admin account which was working fine. I had to create another account on the system, which was also an admin account, when this happened the 'administrator' account disappeared from the 'choose an account to login with' screen. A quick workaround is available, if the user presses ctrl+alt+delete it brings you to the screen where you can type in the username and password, so by manually typing 'administrator' it can log in. Normally this would be easily fixed, I figured the admin account had somehow been disabled from the local system, but i checked all settings and it is setup fine. The laptop is not part of a domain, so I used the management console to delete the new account and all that succeeded in doing was making the 'choose an account to log in with' screen display no accounts to choose. So far I see nothing else to fix it, the option to change the default logon screen to style where you type the username and password also seems to be missing. any ideas?

  Read the article

• /dev/shm (shared memory) on linux

  - by Kirzilla

  Hello, Let's imagine that we have 8Gb of RAM on server. I'm mounting /dev/shm with 4Gb on board. mount -o remount,size=4G /dev/shm Will this memory be strictly reserved for shared memory or if /dev/shm is empty this memory could be used by regular applications (web server, php etc.)? PS:Sorry for my English. I'm asking it because I've just checked df -h and found tmpfs 6.0G 0 6.0G 0% /dev/shm on 8Gb RAM sever. I don't know who made this setup, but it seems to me awful. Thank you!

  Read the article

• Wireshark Not Displaying Packets From Other Network Devices, Even in Promisc Mode

  - by eb80

  System Setup: 1. MacBook running Mountain Lion. 2. Wireshark installed and capturing packets (I have "capture all in promiscuous mode" checked) 3. I filter out all packets with my source and destination IP using the following filter ("ip.dst != 192.168.1.104 && ip.src != 192.168.1.104") 4. On the same network as the MacBook, I use an Android device (connecting via WiFi) to make HTTP requests. Expected Results: 1. Wireshark running on the MacBook sees the HTTP request from the Android device. Actual Results: 1. I only see SSDP broadcasts from 192.168.1.1 Question: What do I need to do so that Wireshark, like Firesheep, can see and use the packets (particularly HTTP) from other network devices on the same network?

  Read the article

• Accessing C$ over LAN on Win2008R2 - cannot by hostname but can by IP and FQDN

  - by Idgoo

  Having an issue with one of our Win2k8 R2 file servers. Trying to access C$ or the Admin share is giving us an error (see error details that the bottom), however we are able to connect using the server's IP and FQDN. can access \\172.16.x.x\c$ with domain cred can access \\server.domain.local\c$ with domain creds cannot access \\servername\c$ with same domain creds Server pings fine with Hostname, IP, FQDN, the Primary DNS suffix is also correct. DNS, PTR and Wins records are all correct for the Server I have checked that I am not trying to connect with cached credentials in the Windows vault, the server is also appending primary and connection specific DNS suffixes to the hostname. Any ideas what might be causing this issue? Error Details: c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions

  Read the article

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• Google calendar sync has stopped working

  - by Andrew Heath

  I set up Google Calendar to sync with Lightning in Thunderbird. It has worked well for the last few weeks. It has now suddenly stopped working. I have checked the CalDAV addresses and they are all still ok. I do not know if my recent addition of syncing my new Android phone with the Google Calendar has anything to do with it, or just a coincidence. When Thunderbird tries to sync, it asks for the username and password. I enter these for the Google Calendar, and end up in a continuous circle.

  Read the article

• Samba file shares - ownership of folder accessible for 1 group verified by MS active direcctory

  - by jackweirdy

  I have a machine set up to share a folder /srv/sambashare, here's an exerpt of the config file: [share] path = /srv/sambashare writable = yes The permissions of that folder are set at 700 and it is owned by nobody:nogroup at the moment. The problem I face is probably a simple one but I'm fairly new to Samba so I'm not sure what to do. The contents of the share should be accessible to a particular user who will authenticate with domain credentials, checked against Active Directory by kerberos. I haven't got kerberos configured yet as I wanted to test the share as soon as samba was configured, albeit basically, to ensure that it works. I've noticed that I can only access & write to the share when the folder is either owned by the user logging in or made world writable. The key issues are that this folder can't be world writable as it contains sensitive stuff, but at the same time can't be owned by a user or group since they come from the AD server. Anyone know what I should do?

  Read the article

• Is my new Graphic Card cause for my PC hanging?

  - by Anirudha

  My Computer Specification My Motherboard specification My new Graphic Card Some days ago I bought a GeForce 8400 GS Graphic card. My computer satisfied all the minimum system requirements it required. After installing the Card in PCI Express Slot I started the computer. But it now hangs at the POST screen i.e.(the first screen when the PC loads). It hangs at Checking NVRAM. I had checked the graphic card on other PC and its works perfectly. So I think there's no problem in the Graphic card. If I remove my graphic card and run my PC with built in Graphic card, my PC works and doesn't hang. So, what can be the problem? Thanks for reading....

  Read the article

• need help in backing up 2 partitions to flash drive(Acronis)

  - by Nrew

  I'm trying it on virtual box and installed Acronis 2010. The backup was successful but when I checked on the backup which is on my flash drive. Here's my problem: Ive installed firefox before the backup, but the program files folder in the flash drive has no folder called firefox. How do I restore the the 2 partitions using the backup. What I did was to: Go to tools & utilities in Acronis then chose clone disk. Selected the source and destination(flash drive). Then I restart, the backup began. First with the first partition which has xp installed and the 2nd was vista lite. What do I do to restore it: I only got these folders on the root of the flash drive: Documents and settings Program files Windows BOOTSECT.BAK

  Read the article

• Exchange 2010 Autodiscover/OAB update issue

  - by bulldog5046

  Mid way through migration from 2003 to 2010 and with a few test users on 2010 i've noticed that the OAB is not being downloaded to outlook clients. I've checked the URL's are configured, addded both our CAS servers to the web based distribution list for the OAB and assigned the OAB to 2 mailbox databases we use but when i use outlook 'Test E-Mail AutoConfiguration' test i still see that the autodiscover says "OAB URL: Public Folder" even though i've now deselected the option. I've ran Test-OutlookWebServices to which i was getting an OAB error about no URL in the autodiscovery but having just re-ran it now appears fine, yey the autoconfigure test still does not. Does anyone have any idea why i'm getting this discrepency?

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• Weird files in User folder

  - by Vervious

  In my user folder (C:/Users/myAccount/) theres a set of interesting hidden files that I've never seen before (right now it's a fresh install of Windows 7 Ultimate). These are: NTUSER.DAT, ntuser.dat.LOG1, ntuser.dat.LOG2, and NTUSER.DAT(whole chain of numbers and letters).TM.bif, NTUSER.DAT(whole chain of numbers and letters).TMContaineretcetc.regtrans-ms, and another similar one. When I try to delete them, it says the system is using them. I've never seen these files before. Are they ok to delete? Or should I leave them in my home folder? I always keep "Show hidden files" as well as "Show System files" checked, since I prefer being able to see all the files on my computer. If I shouldn't delete them, is there at least a way to tidy them up a bit? Thanks.

  Read the article

• I want to run a script when known bluetooth device connects/disconnects to WinXP

  - by Rope

  I have a laptop on my desk at work. I have screensaver timer enabled, so if I'm not using the computer for ten minutes, it will start the screensaver. I also have "On resume, password protect" option checked. This is useful and I want it to be so. However, sometimes I just sit at my cubicle and read some documents without touching the computer. During that time I want my computer to know that I'm there and that there is no need to start the screensaver. I have a mobile phone that is bluetooth paired with the laptop for synchronizing calendars. Is there some way for a script or a program to know that any (or specified) paired device is connected? While typing this out I thought that there might be some registry entries for this. Does anyone have any thoughts on this? -Rope

  Read the article

• Ubuntu 12.04 - Custom Quick Launcher Menu

  - by gotqn

  I have been using Ubuntu for few weeks now and I am have been trying to create custom menu which to add in the launcher. Please, note that my version is 12.04 and I have not got any experience with Linux. I have checked a lot articles and questions likes this one, but have not been able to find what I am looking for. I want to create a custom quick launcher menu and to add it the the standard launcher, but I want to add links to other programs or folders in it. For example: A browsers menu - when it is open (with right mouse click on it), my browsers will be listed: chrome safari opera firefox I even may add their icons there. Music menu - some shortcuts to my favorite music folders.

  Read the article

• why only google related sites load using wireless network

  - by gansai

  I have a wireless internet connection through BSNL. I have a windows 7 ultimate, and using latest Google chrome. During night time ie from 12:30 am onwards till around 5:30 am, I have the following problem: Only the following webpages load: Google Search Google images and all related to google product pages like you see them on the google home page. Blogspot webpages as supported through Google. Any other site loading gets stuck with the status message:- Waiting for www.thaturl.com .... And it goes on and on. Why does this happen? I checked around googling for this but no solution at all. By the way I tried changing my dns addresses too sometimes from automatically to opendns and then Google public dns. I need some solution which might help me to load other websites also. Thanks in advance.

  Read the article

• Ping Flooding in router log

  - by Freeman

  I've had recently a period of repeated disconnections from my router with connection problems. I checked my router log I found several Ping Flooding entries all originating from the IP 69.171.227.232 which turned out to be one of Facebook IPs! I'm wondering what does that means? Can Facebook chat cause such a condition? My router is DLink dir 600 and the condition that devices were disconnected from router, not router from internet.. Connection is WAN And how to solve this router problem?? My wifi clients were about 3-5 at that time..

  Read the article

• Explorer fails to load with UAC enabled

  - by user37679

  While running an InstallShield based installer, my Windows 7 machine became unresponsive. After forcing a reboot, I can log in to the system, but explorer does not run. I can log in as a different user without issue and when I change UAC to its lowest setting, I can log in as the user that was performing the install. However, if I re-enable UAC, I am unable to get explorer to run again on login. I have checked the HKCU\Software\Microsoft\Windows\CurrentVersion\Run and RunOnce, but don't see anything that isn't configured to run on startup. I completed the installation of the software as the "good" user without issue.

  Read the article

• How to find malicious IPs?

  - by alfish

  Cacti shows irregular and pretty steady high bandwidth to my server (40x the normal) so I guess the server is udnder some sort of DDoS attack. The incoming bandwidth has not paralyzed my server, but of course consuming the bandwidth and affects performance so I am keen to figure out the possible culprits IPs add them to my deny list or otherwise counter them. When I run: netstat -ntu | awk '{print $5}' | cut -d: -f1 | sort | uniq -c | sort -n I get a long list of IPs with up to 400 connections each. I checked the most numerous occurring IPs but they come from my CDN. So I am wondering what is the best way to help monitor the requests that each IP make in order to pinpoint the malicious ones. I am using Ubuntu server. Thanks

  Read the article

• How do I know when my on-board ethernet is dead? (Realtek 8112L LAN controller w/ AI NET2 )

  - by Usagi

  So I have an ASUS P7P55D-E Pro motherboard. It has an on-board Realtek 8112L LAN controller w/ AI NET2. I suspect that my LAN controller is dead but I don't really know for sure. This is what I know thus far: Everything was working, I have a triple booted system and ethernet was functional under Linux, Win7, and OSX. My ethernet is no longer functional under all three of the operating systems. I was experiencing random momentary internet outages before everything finally went dark. I don't know much about the AI NET BIOS tool but I believe it just checks for ethernet problems before you boot into an operating system. In any case, it doesn't find a connection upon boot. I've checked the connection on a couple of other machines and everything worked fine. I think I already know the answer to my question, but are there any other possible explanations, or is it dead?

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >