Search Results

Search found 18096 results on 724 pages for 'let'.

Page 305/724 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• Ubuntu unstable, showing awkward behavior

  - by Christophe De Troyer

  Let me start off by saying that this problem can't be described in such a way that allows me to find other topics, which have some relevance to this problem. That's why I created this question. In case this question might have been asked before, I apologize. So what is the problem: My computer (Intel Core I5 2500K - with HD3000 graphics -, 6 gb DDR, 1 SSD, 3 HDD's and an Asus P8Z68 mobo) runs Windows on the SDD. But I decided to give Ubuntu a chance to be my daily OS for basic needs since it's open source and I find it a handicap of not being able to work with it. I decided to run the windows installer and install Ubuntu 12.04 to my 320 Gb hdd which was not being used in my computer. After installing it and booting it, it worked great! I spent the rest of the day/night using it, and falling for it. Great, today I booted Ubuntu (I had the choice in the bootloader as I expected). It asked me for my login and it started logging in. Now, after a few (literally) minutes of letting it "boot" I tried determining the cause of this. What I've figured out so far: When I left click on my desktop it freezes completely for a few seconds I have something like tearing in the left side menu (in games, you know) when I move my mouse around It runs well when just hovering around with my mouse, but from the point I click on something it freezes. What have I tried? I ran a HD Tune diagnostic on the HDD but the performance seems to be very close to the stock values, so I'm taking it as a good HDD. I'm trying to get to the drivers update panel for Ubuntu, but with the state it's in, it's taking a lot of time.. Could anyone point me in a direction for troubleshooting this? I'm not really a noob at all, just when using Linux.. :) Thanks in advance! Christophe,

  Read the article

• Get Started with JavaFX 2 and Scene Builder

  - by Janice J. Heiss

  Up on otn/java is a very useful article by Oracle Java/Middleware/Core Tech Engineer Mark Heckler, titled, “How to Get Started (FAST!) with JavaFX 2 and Scene Builder.”  Heckler, who has development experience in numerous environments, shows developers how to develop a JavaFX application using Scene Builder “in less time than it takes to drink a cup of coffee, while learning your way around in the process”. He begins with a warning and a reassurance: “JavaFX is a new paradigm and can seem a bit imposing when you first take a look at it. But remember, JavaFX is easy and fun. Let's give it a try.” Next, after showing readers how to download and install JDK/JavaFX and Scene Builder, he informs the reader that they will “create a simple JavaFX application, create and modify a window using Scene Builder, and successfully test it in under 15 minutes.” Then readers download some NetBeans files:“EasyJavaFX.java contains the main application class. We won't do anything with this class for our example, as its primary purpose in life is to load the window definition code contained in the FXML file and then show the main stage/scene. You'll keep the JavaFX terms straight with ease if you relate them to the theater: a platform holds a stage, which contains scenes. SampleController.java is our controller class that provides the ‘brains’ behind the graphical interface. If you open the SampleController, you'll see that it includes a property and a method tagged with @FXML. This tag enables the integration of the visual controls and elements you define using Scene Builder, which are stored in an FXML (FX Markup Language) file. Sample.fxml is the definition file for our sample window. You can right-click and Edit the filename in the tree to view the underlying FXML -- and you may need to do that if you change filenames or properties by hand - or you can double-click on it to open it (visually) in Scene Builder.” Then Scene Builder enters the picture and the task is soon done. Check out the article here.

  Read the article

• How to prevent duplication of content on a page with too many filters?

  - by Vikas Gulati

  I have a webpage where a user can search for items based on around 6 filters. Currently I have the page implemented with one filter as the base filter (part of the url that would get indexed) and other filters in the form of hash urls (which won't get indexed). This way the duplication is less. Something like this example.com/filter1value-items#by-filter3-filter3value-filter2-filter2value Now as you may see, only one filter is within the reach of the search engine while the rest are hashed. This way I could have 6 pages. Now the problem is I expect users to use two filters as well at times while searching. As per my analysis using the Google Keyword Analyzer there are a fare bit of users that might use two filters in conjunction while searching. So how should I go about it? Having all the filters as part of the url would simply explode the number of pages and sticking to the current way wouldn't let me target those users. I was thinking of going with at max 2 base filters and rest as part of the hash url. But the only thing stopping me is that it would lead to duplication of content as per Google Webmaster Tool's suggestions on Url Structure.

  Read the article

• Windows XP + PAE + 6GB RAM: See more than 3.5GB?

  - by nonot1

  Firstly let me say I've seen a number of similar questions on SuperUser, and I don't think this is a duplicate. (Most address 4GB RAM installed. I have 6GB) I have Windows XP 32-bit running on a i7-based Xeon system with 6GB of RAM. I only see 3.5GB of RAM in Windows. Is there any way to squeeze more visible RAM out of this set up? Even an extra 1GB would be great. Does having 6GB (vs 4GB) of RAM installed help at all? (I.e Even if I loose the 3.5-4.0 GB region, can I use the area above it?) P.S. Will eventually move to Windows 7 64-bit, but can't for now.

  Read the article

• Stakeholder Management in OUM

  - by user719921

  Where is Stakeholder Management in OUM?  Stakeholder Management typically falls into the purview of the Project Manager, which means much of the associated guidance is found in the OUM Manage Focus Area (a.k.a. Manage).  There is no process in Manage named Stakeholder Management, but this “touch point” can be found in a variety of other processes including Bid Transition (BT), Communication Management (CMM) and Organizational Change Management (OCHM). •         Stakeholder management starts in the Bid Transition process with Stakeholder Analysis •         This Stakeholder Analysis is used to build the Project Team Communication Plan in the Communication Management process. •         Stakeholder management should be executed during the Execution and Control phase.  For example, as issues are resolved, the project manager should take the action item to follow up with the affected stakeholders to ensure they are aware that the issue has been resolved. •       The broader topic of Stakeholder management is also addressed very thoroughly in the Organizational Change Management process in the Implement Focus Area, which is a touch point to the Organizational Change Management process in Manage. Check it out and let me know your thoughts!

  Read the article

• Windows Server 2008: Terminal Services / VDI

  - by JohnyD

  I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you. Update 1: What I'm looking to accomplish with this server is setting up a VDI to allow users to connect from thin-clients from within our network. They will also have to connect from outside our network via VPN which is already in place. Am I able to set this up using Windows Server 2008 (not R2) because I have a 16-bit application which needs to be supported. Unfortunately it's not a candidate as a Remote App.

  Read the article

• How to update entity states and animations in a component-based game

  - by mivic

  I'm trying to design a component-based entity system for learning purposes (and later use on some games) and I'm having some troubles when it comes to updating entity states. I don't want to have an update() method inside the Component to prevent dependencies between Components. What I currently have in mind is that components hold data and systems update components. So, if I have a simple 2D game with some entities (e.g. player, enemy1, enemy 2) that have Transform, Movement, State, Animation and Rendering components I think I should have: A MovementSystem that moves all the Movement components and updates the State components And a RenderSystem that updates the Animation components (the animation component should have one animation (i.e. a set of frames/textures) for each state and updating it means selecting the animation corresponding to the current state (e.g. jumping, moving_left, etc), and updating the frame index). Then, the RenderSystem updates the Render components with the texture corresponding to the current frame of each entity's Animation and renders everything on screen. I've seen some implementations like Artemis framework, but I don't know how to solve this situation: Let's say that my game has the following entities. Each entity have a set of states and one animation for each state: player: "idle", "moving_right", "jumping" enemy1: "moving_up", "moving_down" enemy2: "moving_left", "moving_right" What are the most accepted approaches in order to update the current state of each entity? The only thing that I can think of is having separate systems for each group of entities and separate State and Animation components so I would have PlayerState, PlayerAnimation, Enemy1State, Enemy1Animation... PlayerMovementSystem, PlayerRenderingSystem... but I think this is a bad solution and breaks the purpose of having a component-based system. As you can see, I'm quite lost here, so I'd very much appreciate any help.

  Read the article

• SharePoint 2010 in the cloud a.k.a. SharePoint Online

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). There are 3 ways to run SharePoint On premises, you buy the servers, and you run the servers. Hosted servers, where you don’t run the servers, but you let a hosting company run dedicated servers. Multi-tenant, like SharePoint online – this is what I am talking about in this blog post. Also known as SaaS (Software as a Service). The advantages of a cloud solution are undeniable. Availability, (SharePoint line offers a 99.9% uptime SLA) Reliability. Cost. Due to economies of scale, and no need to hire specialized dedicated staff. Scalability. Security. Flexibility – grow or shrink as you need to. If you are seriously considering SharePoint 2010 in the cloud, there are some things you need to know about SharePoint online. What will work - OOTB Customization, collaboration features etc. will work SharePoint Designer 2010 is supported, so no code workflows will work Visual Studio sandbox solutions, client object model will work. What won’t work - SharePoint 2010 online cloud environment supports only sandbox solutions. BCS, business connectivity services is not supported in SharePoint online. What you can do however is to host your services in Azure, and call them using Silverlight. Custom timer jobs will not work. Long story short, get used to Sandbox solutions – and the new way of programming. Sandbox solutions are pretty damn good. Most of the complaints I have heard around sandbox solutions being too restrictive, are uninformed mechanisms of doing things mired in the ways of 2002. .. or you could just live in 2002 too. Comment on the article ....

  Read the article

• Why's SMC failing on startup?

  - by Brian Knoblauch

  Trying to remove a user from one of our servers, but I seem to be thwarted at every turn... SMC refuses to load the user list (failing with a NoClassDefFoundError in the listAll method of UserContent). vipw just returns with "vipw: /etc/passwd file busy". I'm the only user on the system at the moment (it's our backup SRSS box), and both of these fail even right after a reboot. I don't have console access at the moment either unfortunately (or I would try single user mode). Of course, even if init mode S worked and let me do this one task, it doesn't solve the root problem. Ideas?

  Read the article

• Using local proxy to specify used NIC on Windows 7?

  - by Nico

  I'm running Windows 7 and have 2 NIC installed, both are connected to the Internet (nic#1 LTE, nic#2 DSL). Windows 7 will only allow me to specify a binding order and a metric on which interface to chose but i can't specify this on an application level. My Idea was to use a local proxy server and use the proxy server whenever i want to use nic#2. I tried wingate and free proxy, both applications will let me chose the interface i want to use but this setting seems to have no effect? This is how i configured the applications: http://imageshack.us/photo/my-images/69/freeproxysettings.jpg/ http://imageshack.us/photo/my-images/811/wingateproxysettings.jpg/ Is what i'm trying to do in anyway possible?

  Read the article

• Making LISPs manageable

  - by Andrea

  I am trying to learn Clojure, which seems a good candidate for a successful LISP. I have no problem with the concepts, but now I would like to start actually doing something. Here it comes my problem. As I mainly do web stuff, I have been looking into existing frameworks, database libraries, templating libraries and so on. Often these libraries are heavily based on macros. Now, I like very much the possibility of writing macros to get a simpler syntax than it would be possible otherwise. But it definitely adds another layer of complexity. Let me take an example of a migration in Lobos from a blog post: (defmigration add-posts-table (up [] (create clogdb (table :posts (integer :id :primary-key ) (varchar :title 250) (text :content ) (boolean :status (default false)) (timestamp :created (default (now))) (timestamp :published ) (integer :author [:refer :authors :id] :not-null)))) (down [] (drop (table :posts )))) It is very readable indeed. But it is hard to recognize what the structure is. What does the function timestamp return? Or is it a macro? Having all this freedom of writing my own syntax means that I have to learn other people's syntax for every library I want to use. How can I learn to use these components effectively? Am I supposed to learn each small DSL as a black box?

  Read the article

• A Brief Soul Session with Joss Stone

  - by Oracle OpenWorld Blog Team

   By Karen Shamban The Oracle OpenWorld Music Festival is thrilled to have Joss Stone as one of its featured artists.  Stone took a few moments from her busy tour and travel schedule to answer a few questions for this blog, so read on:  Q. What do you like best about performing in front of a live audience?A. I love to bring the music to the people! It's all fun and games in the studio, and I love it, but the time comes when the world needs to hear it and it's nice to see their faces when they are hearing new songs. Q. Do you prefer smaller, intimate venues or larger, louder ones?  Why?A. I like the smaller ones sometimes, but it really depends on who is in the audience. I prefer it regardless of size when the audience is with you from the start and they dance and let the music take them over - as it does me when I'm on stage. Q. What about your fans surprises you?A. Not a lot really, they have always been very very sweet and polite and giving and loving. It doesn't surprise me because that's what the effect of music is. For the most part they are beautiful people. Little-known fact: Not only is Stone an award-winning musician, she acted in an award-winning television series, Showtime's The Tudors.  Stone played Anne of Cleves, Henry VIII's fourth wife.  Not only did she keep her cool - she kept her head. More about the Oracle OpenWorld Music Festival. More about Joss Stone.

  Read the article

• Can make the proxy settings invisible when I share my internet connection via wifi?

  - by Neil

  This is probably a long shot... I have an HTC Desire and frustratingly found out after I got it that it doesn't support network proxy settings. We have a wireless network at my office that uses a proxy. My desktop at work runs ubuntu. I was wondering if the following set up would work: Plug a USB Wireless adapter into the desktop that has a working internet connection using the proxy. Setup the wireless adapter as an ad-hoc network Share the internet connection over the ad-hoc network. Make it so that the use of the proxy is invisible to users of the shared network connection. Connect the Android phone to the ad-hoc wireless network and utilise the internet connection. My question is this: Is this possible or should I give up now and not even try? I think I can handle steps 1, 2, 3 and 5. I just have no idea if step 4 even makes sense, let alone is possible. Thanks

  Read the article

• How to create an Orthographic display in OpenGL (ES) that handles different screen sizes and orientations?

  - by Piku

  I'm trying to create an iPad/iPhone game using GLES2.0 that contains a 3D scene with a heads-up-display/GUI overlaid on the top. However, this problem would also apply if I were to port my game to a computer and run the game in a resizable window, or allow the user to change screen resolutions... When trying to make the 2D GUI/HUD work I've made the assumption that all I'm really doing is drawing a load of 2D textured 'quads' on the screen and am trying to treat the orthographic projection as an old-style 2D display with 0,0 in the upper left and screenWidth,ScreenHeight in the lower right. This causes me all sorts of confusion when I rotate my ipad into Landscape mode since I can't work out what to put into my projection and modelview matrices to turn everything around the right way. It also gets messy if I want to support the iPad's large screen, an iPhone or a Retina display since I have to then draw three sets of textures for everything and work out which ones to use. Should I be trying to map the 2D OpenGL co-ords 1:1 with the screen? While typing out this question it occurs to me that I could keep my origin in the centre, still running -1/+1 along the axes. This would let me scale my 2D content appropriately on the different screen sizes, but wouldn't I end up with the textures being scaled and possibly losing quality? I'm using OpenGLES 2.0 and have a matrix library that has equivalents to the GLES1.1 glOrthof() and glFrustrum() calls.

  Read the article

• After login I only get a terminal window

  - by Ambidex

  First of, let me tell you I'm a n00b at ubuntu. I have updated my Ubuntu mediacenter to a later version of ubuntu, currently at 12.04. I'm working through a lot of updates to get to the latest. But since my first update I got the new login screen (lightdm?) and my autologin wasen't working anymore. So I Googled how I could make lightdm autologin. I've managed this by making my /etc/lightdm/lightdm.conf look as follows: [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu autologin-user=my_user autologin-userutologin-user=-timeout=0 Which seemed to work... But now that it automatically logs in, I seem to get the following type of screen (through nomachine remote desktop client): Sorry... I am unable to post my screenshot here because I do not have the 10 reputation points in askubuntu yet.... darn it... But the screen has a terminal at the top left of the screen (not an actual "window"), and the ubuntu loading screen is still behind it. I've tried running startx as you can see. But, this seems to actually be x server. But if I run unity --reset, it seems that a lot of the desktop gets restored, but... with a lot of errors and warnings and the next time I boot, it's the same story all over again. Also, when I close the terminal window after getting my desktop back, I get thrown back at the login screen. Please bear with my lack of knowledge of ubuntu and it's underlying unix. I thank you in advance.

  Read the article

• FTP restrict user access to a specific folder

  - by Mahdi Ghiasi

  I have created a FTP Site inside IIS 7.5 panel. Now I have access to whole site using administrator username and password. Now, I want to let my friend access a specific folder of that FTP site. (for example, this path: \some\folder\accessible\) I can't create a whole new FTP Site for this purpose, since it says the port is being used by another website. How to create an account for my friend to have access to just an specific folder? P.S: I have read about User Isolation feature of IIS 7.5, but I couldn't find how to create a user just for FTP and set it to a custom path.

  Read the article

• Finding bugs is difficult, right?

  - by Laila

  Something I hear developers tell us all the time is that they take pride in being a developer.and that bugs are a dent in that pride. Someone once told me "I know I have found bugs years later, and it's the worst feeling in the world." So how can you avoid that sinking feeling when you find out a bug has been in production months before someone lets you know about it? Besides, let's face it: hearing about a bug often means a world of pain, because it can take hours to track down where the problem is and more hours (if not days) to fix it. And during that time, you're not working on something new, and that, my friends, is really frustrating! So to cheer you up, we've created a Bug Hunt game, where you battle against the clock to spot bugs. We've really enjoyed putting this together and hope you enjoy playing it too. Once you're done with the bug hunt, we explain how easy it can be to find and fix bugs in real life, using a neat mechanism that we call Automated Error Reporting. Play the game now.

  Read the article

• Scene graphs and spatial partitioning structures: What do you really need?

  - by tapirath

  I've been fiddling with 2D games for awhile and I'm trying to go into 3D game development. I thought I should get my basics right first. From what I read scene graphs hold your game objects/entities and their relation to each other like 'a tire' would be the child of 'a vehicle'. It's mainly used for frustum/occlusion culling and minimizing the collision checks between the objects. Spatial partitioning structures on the other hand are used to divide a big game object (like the map) to smaller parts so that you can gain performance by only drawing the relevant polygons and again minimizing the collision checks to those polygons only. Also a spatial partitioning data structure can be used as a node in a scene graph. But... I've been reading about both subjects and I've seen a lot of "scene graphs are useless" and "BSP performance gain is irrelevant with modern hardware" kind of articles. Also some of the game engines I've checked like gameplay3d and jmonkeyengine are only using a scene graph (That also may be because they don't want to limit the developers). Whereas games like Quake and Half-Life only use spatial partitioning. I'm aware that the usage of these structures very much depend on the type of the game you're developing so for the sake of clarity let's assume the game is a FPS like Counter-Strike with some better outdoor environment capabilities (like a terrain). The obvious question is which one is needed and why (considering the modern hardware capabilities). Thank you.

  Read the article

• EclipseLink does multitenancy. Today.

  - by alexismp

  So you heard Java EE 7 will be about the cloud, but that didn't mean a whole lot to you. Then it was characterized as PaaS, something in between IaaS and SaaS. And finally it all became clear when referenced as support for multitenancy. Or did it? When it comes to JPA and persistence is general, multitenancy is defined as the ability to share a database schema among various groups of users (i.e. tenants). This means that there is no database setup or reconfiguration required as the data is co-located in the same database. EclipseLink 2.3 (the Indigo train release) let's you do just that by supporting tenant discriminator column(s) via annotations or XML with applications providing values for these discriminators via an API or PU configuration. Check out details here. EclipseLink 2.3 is scheduled to be the default and supported JPA provider for GlassFish 3.1.1. Another nice feature of this release is the ability to extend persistence units on the fly. The GlassFish Podcast has an interview up with EclipseLink's Doug Clarke. Expect more on multitenancy across the Java EE spectrum as the specification work progressed.

  Read the article

• both IPV4 and IPV6 at the same time over DSL connection?

  - by namiheike

  Let me describe my situation: while I connect computer with the wire, I've got an IPV6 address automatically, there's a "Wired connection" tab in network manager, and I can access an website that support IPV6 (google,facebook,twitter...)with a hosts file, or use the proxy like google.com.sixxs.org But if I want to access the whole internet, I have to create a DSL connection with username and password that ISP gave me. BUT after I change my connection into this DSL connection, I cannot access website over IPV6, even there's the site's ipv6 address in /etc/hosts, then I realize that I lose my IPV6 connection, because the ping6 says connect: Network is unreachable. the problem is, there's no IPV6 tab or options about IPV6 in the configure of DSL connection. It feels like I can only use one connection at the same time, but the DSL doesn't support IPV6 and the wired connection doesn't support IPV4(I mean, there's no way to input the password the ISP gave me) maybe make somebody uncomfortable, but when I work in MS windows, there's no such problem, (maybe just feel like) I can access V4 and V6 at the same time. So how to solve with this? thanks a lot. I'm in 11.10 + gnome3

  Read the article

• Impossible to select folders and files with mouse (Ubuntu 12.04)

  - by François

  First-time post for me here (after being a regular reader for two years though) so thank you all for the quality of replies and help provided. My problem is very simple apparently but a tricky one. I just installed the Ubuntu 12.04(1) along with the Gnome3-shell environment on my new pc desktop Acer Aspire X3995 (see config below). Everything work (more or less) so far (I still have problems of sound and disabled 2-fingers gestures with my screen -- which I will have to deal with xconfig settings I think -- though), but the main problem is that I cannot select files/folders with my USB mouse. When I try to double click on them, nothing happen (sometimes one folder or file is selected but then unselected again). Note that the navigation works perfectly from the USB keyboard and from the touch-screen (I am using a 23" wide touch-screen Acer Monitor T231Hbmid). Also, the mouse works perfectly with other menu navigation, with the only difference that the text of certain menus is selected as if I was holding the left click on them. So I assume the problem is only related to the mouse. Needless to say that the usual basic hardware checks have been performed (unplugging, powered-off, etc.). My level is simply "advanced user", meaning that if you provide me with intelligible input I should find my way, but please don't expect too much technical/specific knowledge... :) Please let me know if you need more information on this bug. Now, fingers crossed... and thanks in advance! Ciao, François Config of Acer Aspire X3995: Ubuntu 12.04 / Gnome3-shell environment / Intel Core i5 3450 / nVidia GeForce 605, 1Gb. Screen: Acer Monitor TFT 23" wide T231Hbmid

  Read the article

• http to https upgrade -- SEO troubles

  - by SLIM

  I upgraded my site so that all pages have gone from using http to https. I didn't consider that Google treats https pages differently than http. I re-created my sitemap to so that all links now reflect the new https and let it be for a few days. (Whoops!) Google is now re-indexing all https pages. I have about 19k pages on the site, and Google has already indexed about 8k of the new https. The problem is that Google sees all of these as brand new pages when many of them have a long http history. Of course most of you will recognize the problem, I didn't set up a 301 from the old http to the new https. Is it too late to do this? Should I switch my sitemap back to http and then 301 to the new https? Or should I leave the sitemap as is, and setup 301 redirects anyway.. I'm not even sure if Google is trying to reach the http site anymore. Currently the site is doing 303 redirects (from http to https), although I haven't figured out why yet. Thanks for any suggestions you can offer.

  Read the article

• How to highlight non-rectangular hotspots?

  - by HuseyinUslu

  So my question is highly related to Creating non-rectangular hotspots and detecting clicks. Yet again, I've irregular hot-spots (think the game Risk). So basically, we can detect clicks on these hot-spots easily using color key mapping as discussed in above question which I don't have any problems implementing (which is also covered here in details). The problem is about highlighting these irreguar hotspots. So let me explain the question a bit more - the above color key mapping guide uses this as a world map: Then the author color-maps the imaginary countries: Now we can now detect the country the pointer is over. In the same article author mentions outlining countries on mouse-over. Though to get the effect, he creates unique border assets for each country - like: For the game I'm working on I'm using the same color-key mapping idea to detect hot-spots, but I didn't like the way of highlighting hot-spots. Coloring all the hot-spots is already a time-consuming job for me - as I have 25+ hot-spots for each map. Further, the need to have 25 unique border/highlight asset per hot-spot doesn't sound right. Anyone have a better idea/suggestion on highlighting these hot-spots?

  Read the article

• ArchBeat Link-o-Rama for 2012-09-06

  - by Bob Rhubart

  Oracle Technology Network Architect Day - Boston, MA - 9/12/2012 Sure, you could ask a voodoo priestess for help in improving your solution architecture skills. But there's the whole snake thing, and the zombie thing, and other complications. So why not keep it simple and register for Oracle Technology Network Architect Day in Boston, MA. There's no magic, just a full day of technical sessions covering Cloud, SOA, Engineered Systems, and more. Registration is free, but seating is limited. You'll curse yourself if you miss this one. Register now. Adding a runtime LOV for a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena illustrates how to customize the parameters tab for a taskflow in WebCenter. Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET | Scott Nelson "It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings," says Scott Nelson. "Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there." Using FMAP and AnalyticsRes in a Oracle BI High Availability Implementation | Christian Screen "The fmap syntax has been used for a long time in Oracle BI / Siebel Analytics when referencing images inherent in the application as well as custom images," says Oracle ACE Christian Screen. "This syntax is used on Analysis requests an dashboards." More on Embedded Business Intelligence | David Haimes David Haimes give an example of Timeliness as "one of the three key attributes required for BI to be considered embedded BI." Thought for the Day "Architect: Someone who knows the difference between that which could be done and that which should be done. " — Larry McVoy Source: Quotes for Software Engineers

  Read the article

• Wordpress .htaccess preventing subfolder access

  - by John K.

  This is sort of a goofy setup, but it's not in my power to reconfigure it at this time. I'm running in a shared hosting environment. The domain is example.com. This is an add-on domain on the host side with example.com being redirected to the www/example.com sub-directory. That directory houses a standard Wordpress site which acts as the main site when you visit example.com. The .htaccess file within that directory is: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteRule ^wp-admin/profile\.php$ /ssm/welcome [R] </IfModule> I have a subdirectory, at the root level with the /example.com subdirectory that houses a cake php application. That subdirectory is /tracker. My problem is that when I attempt to browse to example.com/tracker, I get a 404 from Wordpress because perma links are on. What I think I need is a rewrite rule in the Wordpress .htaccess file that short circuits the existing rewrite rules and permits example.com/tracker to work independently of the Wordpress install. Or a rewrite rule at the root level that short circuits the redirect to the /example.com directory in the first place. Not sure how well I explained that so here's a summary. The www/ directory structure: example.com/ tracker/ Add on domain of www.example.com redirecting to the /example.com directory with Wordpress and a tracker/ directory running CakePHP which I would like to access via www.example.com/tracker. If you need further info or clarification let me know!

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >