Search Results

Search found 9216 results on 369 pages for 'color scheme'.

Page 306/369 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Remove Kernel Lock from Unmounted Mass Storage USB Device from the Command Line in Linux

  - by Casey

  I've searched high and low, and can't figure this one out. I have a older Olympus Camera (2001 or so). When I plug in the USB connection, I get the following log output: $ dmesg | grep sd [20047.625076] sd 21:0:0:0: Attached scsi generic sg7 type 0 [20047.627922] sd 21:0:0:0: [sdg] Attached SCSI removable disk Secondly, the drive is not mounted in the FS, but when I run gphoto2 I get the following error: $ gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') *** What command will unmount the drive. For example in Nautilus, I can right click and select "Safely Remove Device". After doing that, the /dev/sg7 and /dev/sdg devices are removed. The output of gphoto2 is then: # gphoto2 --list-config /Camera Configuration/Picture Settings/resolution /Camera Configuration/Picture Settings/shutter /Camera Configuration/Picture Settings/aperture /Camera Configuration/Picture Settings/color /Camera Configuration/Picture Settings/flash /Camera Configuration/Picture Settings/whitebalance /Camera Configuration/Picture Settings/focus-mode /Camera Configuration/Picture Settings/focus-pos /Camera Configuration/Picture Settings/exp /Camera Configuration/Picture Settings/exp-meter /Camera Configuration/Picture Settings/zoom /Camera Configuration/Picture Settings/dzoom /Camera Configuration/Picture Settings/iso /Camera Configuration/Camera Settings/date-time /Camera Configuration/Camera Settings/lcd-mode /Camera Configuration/Camera Settings/lcd-brightness /Camera Configuration/Camera Settings/lcd-auto-shutoff /Camera Configuration/Camera Settings/camera-power-save /Camera Configuration/Camera Settings/host-power-save /Camera Configuration/Camera Settings/timefmt Some things I've tried already are sdparm and sg3_utils, however I am unfamiliar with them, so it's possible I just didn't find the right command. Update 1: # mount | grep sdg # mount | grep sg7 # umount /dev/sg7 umount: /dev/sg7: not mounted # umount /dev/sdg umount: /dev/sdg: not mounted # gphoto2 --list-config *** Error *** An error occurred in the io-library ('Could not lock the device'): Camera is already in use. *** Error (-60: 'Could not lock the device') ***

  Read the article

• Improving Performance of RDP Over LAN

  - by Jared Brown

  Architecture: A deployment of 6 new HP thin clients (Windows XP Embedded) with TCP/IP access to several new HP servers (Windows 2003 Server). Each thin client is connected over fiber optic to a Gigabit Cisco switch, which the servers are connected to. There are 10/100 Ethernet to fiber converter boxes on each end of the fiber cables. Problem: Noticeable lag over RDP while using the Unigraphics CAD package. 3D models take .5 to 1 second to respond to mouse actions. Other Details: Network throughput on each thin client's RDP session is 7288 kbps. RDP connection settings - color setting: 15k, all themes, etc. turned off. Local and remote system performance stats are well within norms (CPU, Memory, and Network). Question: Are there newer versions of terminal services or RDP I can use on my existing OSes? Are there compression algorithms, etc. that are well suited for a high-bandwidth LAN? Are there valid alternatives that will yield higher performance (i.e. UltraVNC with drivers installed)? Are there TCP/IP tuning options I can exploit?

  Read the article

• Problem setting command-line console resolution. vbeinfo in grub2 does not report all resolutions

  - by Kent

  I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub: grub> vbeinfo VBE info: version: 3.0 OEM software rev: 1.0 total memory: 8128 KiB List of compatible video modes: Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved 0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x114: 800 x 600 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 0x115: 800 x 600 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24 0x101: 640 x 480 x 8 Packed 0x103: 800 x 600 x 8 Packed 0x111: 640 x 480 x 16 Direct, mask: 5/6/5/0 pos: 11/5/0/0 Configured VBE mode (vbe_mode) = ox101 grub> Relevant parts of sudo lspci -v: ... ... 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 28 ... ... ... Any ideas on how I can set the console resultion like I want it?

  Read the article

• Cachefilesd (cachefiles) everything seems to be set up, still not working

  - by Evgenius

  I'm trying to set up cachefilesd to work with my network folder shared using NFS. I have seemingly everything set up, however cachefilesd starts normally, however caching isn't functioning. Here is output of commands, which I ran in the same order 1 sudo mount ... cache-1:/mnt/datashared on /mnt/nfsshare type nfs (rw,sync,ac,acregmin=3,acregmax=60,acdirmin=30,acdirmax=300,lookupcache=pos,vers=3,fsc) ... 2 lsbmod | grep cachefiles cachefiles 40555 1 fscache 57430 4 nfs,cifs,cachefiles,nfsv4 3 [edited - deleted] 4 uname -r 3.8.0-34-generic 5 grep CONFIG_NFS_FSCACHE /boot/config-3.8.0-34-generic CONFIG_NFS_FSCACHE=y 6 lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 13.04 Release: 13.04 Codename: raring 7 sudo service cachefilesd restart * Restarting FilesCache daemon cachefilesd [ OK ] 8 dmesg [6211206.141781] FS-Cache: Withdrawing cache "mycache" [6211210.135236] FS-Cache: Cache "mycache" added (type cachefiles) [6211210.135242] CacheFiles: File cache on sdb1 registered [6214644.348929] CacheFiles: File cache on sdb1 unregistering [6214644.348935] FS-Cache: Withdrawing cache "mycache" [6214654.575909] FS-Cache: Cache "mycache" added (type cachefiles) [6214654.575915] CacheFiles: File cache on sdb1 registered 9 ps aux | grep cachefilesd root 65399 0.0 0.0 4460 540 ? Ss 23:14 0:00 /sbin/cachefilesd 1000 65464 0.0 0.0 8160 916 pts/0 S+ 23:16 0:00 grep --color=auto cachefilesd finally, biggest problem is 10 cat /proc/fs/nfsfs/volumes NV SERVER PORT DEV FSID FSC v3 64476645 801 0:24 233e020f0da07a93 no tl;dr I think I configured everything properly but FSC mount option + fscachefilesd don't seem to work

  Read the article

• Any ideas out there as to how the data can be recovered from an SSD?

  - by ben

  A friend had some form of catastrophic failure on an HP mini 1000, unbootable. Of course there was data that wasn't backed up. I've removed the SSD and hooked it up to a ZIF 40 enclosure but can not seem to get the drive to be recognized in Windows 7. In Disk Management it displays as present, but uninitialized. Attempting to initialize it presents an error Virtual Disk Manager - "The device is not ready". There is scant information on MIE (the custom OS), so I'm not even sure what kind of file system I'm dealing with. In any case, if the filesystem is indeed some flavor other than FAT or NTFS, is this error consistent with that? Are there any creative ideas out there as to how the data can be recovered? Update: Thanks for all the suggestions! I hadn't even considered running a live cd. Unfortunately no luck with Ubuntu (live cd) or explore2fs. The zif connection seems ok (color coded green led for proper connect, orange for not). The drive can't be initialized and therefore can't be formatted, so I guess there may be some real damage. Probably needs to head to a specialist. Thanks again for the feedback, much appreciated.

  Read the article

• ClearType setting ignored in Windows Virtual PC with Windows XP Pro

  - by Yadyn

  I have a VM set up through Windows Virtual PC for Windows XP Pro and I have been completely unable to get ClearType to work. I have turned it on in the Display - Appearance - Effects dialog but it seems like it completely ignores this. All text is still without any anti-aliasing. Even setting it to normal smoothing doesn't work. If I disable Integration Features, it seems to work, but then I lose a lot of nice features. What's weirder, is that the Windows XP Mode installed with Windows Virtual PC (this is separate from my XP Pro VM) works with both ClearType and Integration Features just fine. I turned it on the same way and it works like a charm, no problems. I'm running Windows 7 Professional 64-bit as the host OS and have the latest (to my knowledge) Windows Virtual PC installed. The only funny business I can think of is that I've enabled 24-bit color via the Group Policy setting inside each XP virtual machine (both Pro and the stripped down XP mode copy). This is a fairly well-known trick documented all over the web, but here's a typical post about it.

  Read the article

• XTerm and a bold text

  - by user610378

  This is my Xterm config: XTerm*saveLines: 512 XTerm*reverseVideo: false XTerm*reverseWrap: true XTerm*fullCursor: true XTerm*scrollTtyOutput: on XTerm*scrollKey: on XTerm*eightBitInput: false XTerm*pointerColor: white XTerm*pointerShape: left_ptr XTerm*charClass: 37:48,45-47:48,58:48,64:48,126:48 XTerm*cursorColor: rgb:aa/aa/aa XTerm*cursorColor2: black XTerm*color0: rgb:71/71/71 XTerm*color1: rgb:cd/00/00 XTerm*color2: rgb:b4/cd/00 XTerm*color3: rgb:cd/cd/00 XTerm*color4: rgb:71/71/71 XTerm*color5: rgb:cd/00/cd XTerm*color6: rgb:00/cd/cd XTerm*color7: rgb:e5/e5/e5 XTerm*color8: rgb:4c/4c/4c XTerm*color9: rgb:ff/00/00 XTerm*color10: rgb:55/ac/55 XTerm*color11: rgb:ff/ff/00 XTerm*color12: rgb:46/82/b4 XTerm*color13: rgb:ff/00/ff XTerm*color14: rgb:00/ff/ff XTerm*color15: rgb:ff/ff/ff XTerm*colorBD: white XTerm*colorUL: SkyBlue XTerm*colorBDMode: on XTerm*colorULMode: on XTerm*underLine: on XTerm*background: rgb:30/0a/24 XTerm*foreground: white XTerm*font: -*-monospace-medium-r-normal-9-140-*-*-m-*-* XTerm*font1: 5x7 XTerm*font2: 6x10 XTerm*font3: fixed XTerm*font4: 9x15 XTerm*ScrollBar.Background: gray XTerm*ScrollBar.thickness: 0 XTerm*ScrollBar.foreground: gray XTerm*ScrollBar: false XTerm*ScrollBar.DrawBorder: false XTerm*loginShell: true XTerm*faceName: Mono XTerm*faceSize: 9 Could anyone say is it possible to make bold some text, wich color is e.g. color1 from my config? I've tried XTerm*color1: rgb:cd/00/00 bold, but this doesn't work.

  Read the article

• can't get php mail() working on Ubuntu desktop version with sendmail and postfix

  - by user36428

  I'm running Ubuntu 9.10 LAMP and trying to do a simple email test with PHP and I'm not getting any emails sent. mail("[email protected]", "eric-linux test", "test") or die("can't send mail"); I get no errors from PHP when running that script. In my php.ini file is: sendmail_path = /usr/lib/sendmail -t -i $ sudo ps aux | grep sendmail eric 2486 0.0 0.4 8368 2344 pts/0 T 14:52 0:00 sendmail -s “Hello world” [email protected] eric 8747 0.0 0.3 5692 1616 pts/2 T 16:18 0:00 sendmail eric 8749 0.0 0.3 5692 1636 pts/2 T 16:18 0:00 sendmail start eric 9190 0.0 0.3 5692 1636 pts/2 T 19:12 0:00 sendmail start eric 9192 0.0 0.3 5692 1616 pts/2 T 19:12 0:00 sendmail eric 9425 0.0 0.3 5692 1620 pts/1 T 19:37 0:00 sendmail eric 9427 0.0 0.3 6584 1636 pts/1 T 19:37 0:00 sendmail restart eric 9429 0.0 0.3 5692 1636 pts/1 T 19:38 0:00 /usr/lib/sendmail restart eric 9432 0.0 0.1 3040 804 pts/1 R+ 19:38 0:00 grep --color=auto sendmail When I run $ sendmail start it just hangs there doing nothing. I installed postfix also to see if it would help, but it didn't. I tried to see port 25: eric@eric-linux:~$ telnet localhost 25 Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 eric-linux ESMTP Postfix (Ubuntu) thanks

  Read the article

• Advanced Web Browsing: hitting next with keyboard (single keystroke)

  - by Dan

  I have a website for class that is literally 1000's of pages long, with a next button at the bottom like this: Prev 1 2 3 4 Next With the following code, if that helps: <a href="javascript:gotoModuleObjective(1,1,34,17, 1, 0);">Prev</a> </td> <td align="center" width="10"> <font color="CC0000">1</font> </td> <td align="center" width="10"> <a href="javascript:gotoModuleObjective(1,24,33,2,1,0);">2</a> </td> <td align="center" width="10"> <a href="javascript:gotoModuleObjective(1,24,33,3,1,0);">3</a> </td> <td align="center" width="10"> <a href="javascript:gotoModuleObjective(1,24,33,4,1,0);">4</a> </td> <td align="right" style="white-space:nowrap;" width="30"> <a href="javascript:gotoModuleObjective(1, 24,33,2, 1, 0);">Next</a> </td> The numbers change depending on where you are. I would like to be able to, from the keyboard, hit the next button. I am using windows, but can switch to any browser, if this is only possible is a given browser. If this can be done with just one keystroke that would be wonderful. Like just hitting the forward arrow would automatically bring click the button called next and bring me to the next page. Is this possible? Thanks, Dan

  Read the article

• Memory upgrade to 8GB on unibody MacBook

  - by dlamblin

  I bought the 13" unibody MacBook one month prior to it's upgrade to become the new improved 13" unibody MacBook Pro (with unopenable battery compartment, extra 3 hours of battery life, more color gammut, SD slot, firewire 800 port, and a new 8Gb memory limit). My MacBook says it is limited to 4GB of DDR3 1066mhz memory, in 2 SO-DIMMs. But that was written back when you couldn't get 2 4GB SO-DIMMs. Now that you can get them, the very similar MacBook Pro is shipping with 4GB standard, and can be upgraded to 8GB. I've asked (Apple reps), and I'm repeatedly told that my model cannot be upgraded to 8. When I ask for the reason they alway say: "Because that's the published limit at the time your mac was built." I find this unconvincing. If they said: "Because the memory controller in the chipset is limited to 4GB, despite being seemingly identical to the memory controller in the same chipset newest MacBook model," then I'd just take their word for it. Has anyone tried it, or found any research as to whether two 4GB DDR3 1066mhz SO-DIMMs can be installed in the unibody MacBook without FireWire?

  Read the article

• How to enable synergy 24800 (or some other port) through firewalld

  - by ndasusers

  After upgrading to Fedora 18, Synergy, the keyboard sharing system was blocked by default. The culprit was firewalld, which happily ignored my previous settings made in the Fedora GUI, backed by iptables. ~]$ ps aux | grep firewall root 3222 0.0 1.2 22364 12336 ? Ss 18:17 0:00 /usr/bin/python /usr/sbin/firewalld --nofork david 3783 0.0 0.0 4788 808 pts/0 S+ 20:08 0:00 grep --color=auto firewall ~]$ Ok, so how to get around this? I did sudo killall firealld for several weeks, but that got annoying every time I rebooted. It was time to look for some clues. There were several one liners, but they did not work for me. They kept spitting out the help text. For example: ~]$ sudo firewall-cmd --zone=internal --add --port=24800/tcp [sudo] password for auser: option --add not a unique prefix Also, posts that clamied this command worked also stated it was temporary, unable to survive a reboot. I ended up adding a file to the config directory to be loaded in on boot. Would anyone be able to have a look at that and see if I missed something? Though synergy works, when I run the list command, I get no result: ~]$ sudo firewall-cmd --zone=internal --list-services ipp-client mdns dhcpv6-client ssh samba-client ~]$ sudo firewall-cmd --zone=internal --list-ports ~]$

  Read the article

• Software to clean up photos of whiteboards and documents?

  - by Norman Ramsey

  I take a lot of photos of whiteboards, blackboards, and so on for teaching purposes (examples online through May 2010). I'm interested in cleaning them up for archival purposes, preferably using Linux. Commercial products ClearBoard and PhotoNote are priced a little aggressively for my purposes, plus my students would like to have this capability too. Does anyone know of any good, open source software for Converting photographs to images with just a few colors? Eliminating perspective distortion? Removing unwanted junk from around the edges of an image? or anything like that? I'm imagining that I start out with a picture of my whiteboard using red and black markers, and I end up with a three-color image using just white, red, and black. Or I photograph a laser-printed document and end up with a clean black-and-white image. I have tried standard tools that reduce the number of colors in an image, and they do a terrible job—probably because they are trying to reproduce the uneven illumination of the original image. Command-line Linux tools would be ideal.

  Read the article

• EEE PC dropbox server running 24/7

  - by microspino

  I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have Samsung SCX 4521F (fax/print/scan/copy), Samsung ML2010, HP Laser jet P1006, HP Color Laserjet CP1215, HP Office jet pro K8600, HP Design jet 500. All of them now are connected using little print servers and I want to get rid of them hooking everything to this mini server. The fax/print/scan/copy machine need to stay connected to a PC to make me able to use the software that comes with It. The mini server would save me on this too. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: If You have something similar running for a long time If You disagree with this hardware choice and If You would suggest some other device. If You see any issues with my printing setup Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

  Read the article

• How do I make XTerm not use bold?

  - by mike

  I like using XTerm, I like its default "fixed" font, and I like using terminal colors rather than having a monochromatic terminal. However, XTerm seems to insist on using a bold version of the font whenever it's displaying a bright color: I hate hate hate the bold version of the font, but I like the brightness. The man page seems to suggest that adding "XTerm.VT100.boldMode:false" to my ~/.Xresources would disable this "feature", but it doesn't seem to have any effect. I've had it in there for months, so it's not a rebooting issue. How can I force XTerm to always use the standard, non-bold version of the fixed font, even when it's displaying bright text? Edit: Some have suggested putting "XTerm*boldMode: false" in my ~/.Xresources. That didn't help either. I've confirmed that the changes have taken effect with xrdb, though: $ xrdb -query | grep boldMode XTerm*boldMode: false And if i run xprop and click an xterm, I get "WM_CLASS(STRING) = "xterm", "XTerm"" .. so i'm definitely running real xterms. BTW, this is just a plain-vanilla Ubuntu Intrepid box. If anyone else here is running the same, can you try running: echo -e '#\e[1m#' ...and let me know whether the # on the right has a black pixel in the middle like the one on the left does?

  Read the article

• Css absolute position don't work in MS WORD

  - by Tim

  Hello! This is a sample: <html> <head> <title>word test</title> </head> <body> <div style='position: absolute; width: 30px; height: 50px; top: 100px; left: 20px; border-color: black; border-width: 1px; border-style: solid;'> <p>Hello!</p> </div> </body> </html> Save it as "word.doc" and open in MS WORD. Absolute position don't work! Div is rendered on the top of document and with 100% width. Why? I can't use a html tables. Version on ms word: 2003

  Read the article

• How do I get the F1-F12 keys to switch screens in gnu screen in cygwin when connecting via SSH?

  - by Mikey

  I'm connecting to a desktop running cygwin via SSH from the terminal app in Mac OS X. I have already started screen on the cygwin side and can connect to it over the SSH session. Furthermore, I have the following in the .screenrc file: bindkey -k k1 select 1 # F1 = screen 1 bindkey -k k2 select 2 # F2 = screen 2 bindkey -k k3 select 3 # F3 = screen 3 bindkey -k k4 select 4 # F4 = screen 4 bindkey -k k5 select 5 # F5 = screen 5 bindkey -k k6 select 6 # F6 = screen 6 bindkey -k k7 select 7 # F7 = screen 7 bindkey -k k8 select 8 # F8 = screen 8 bindkey -k k9 select 9 # F9 = screen 9 bindkey -k F1 prev # F11 = prev bindkey -k F2 next # F12 = next However, when I start multiple windows in screen and attempt to switch between them via the function keys, all I get is a beep. I have tried various settings for $TERM (e.g. ansi, cygwin, xterm-color, vt100) and they don't really seem to affect anything. I have verified that the terminal app is in fact sending the escape sequence for the function key that I'm expecting and that my bash shell (running inside screen) is receiving it. For example, for F1, it sends the following (hexdump is a perl script I wrote that takes STDIN in binmode and outputs it as a hexadecimal/ascii dump): % hexdump [press F1 and then hit ^D to terminate input] 00000000: 1b4f50 .OP If things were working correctly, I don't think bash should receive the escape sequence because screen should have caught it and turned it into a command. How do I get the function keys to work?

  Read the article

• Gray Progress Bar in Macbook Boot caused by Partition Fault

  - by Konstantin Bodnya

  Here's my problem: When I try to load my macbook it shows the gray progress bar. It takes a while to fill the whole progress and after it macbook just shuts down. I tried to boot from recovery partition and run Disk Utility to repair it. Disk Utility showed my "Macintosh HD" in a gray color and failed to repair it. I thought all my data was lost, but then I tried the following: So I booted into ubunto from live usb and it successfully mounted my macintosh hd hfs+ partition. Parted shows me the following partitions on my disk: Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 20.5kB 210MB 210MB fat32 EFI System Partition boot 2 210MB 499GB 499GB hfs+ Macintosh HD 3 499GB 500GB 650MB hfs+ Recovery HD Seems legit except for FAT32 for EFI System Partition. Since all my data is okay and backed up what should I do to recover the system. I don't really want to reinstall all the system though I believe there's a command to make it allright in linux. Thank you everyone!

  Read the article

• X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

  - by Marcelo Santos

  After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

  Read the article

• Cannot connect to postgres installed on Ubuntu

  - by Assaf

  I installed the Bitnami Django stack which included PostgreSQL 8.4. When I run psql -U postgres I get the following error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? PG is definitely running and the pg_hba.conf file looks like this: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 What gives? "Proof" that pg is running: root@assaf-desktop:/home/assaf# ps axf | grep postgres 14338 ? S 0:00 /opt/djangostack-1.3-0/postgresql/bin/postgres -D /opt/djangostack-1.3-0/postgresql/data -p 5432 14347 ? Ss 0:00 \_ postgres: writer process 14348 ? Ss 0:00 \_ postgres: wal writer process 14349 ? Ss 0:00 \_ postgres: autovacuum launcher process 14350 ? Ss 0:00 \_ postgres: stats collector process 15139 pts/1 S+ 0:00 \_ grep --color=auto postgres root@assaf-desktop:/home/assaf# netstat -nltp | grep 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 14338/postgres tcp6 0 0 ::1:5432 :::* LISTEN 14338/postgres root@assaf-desktop:/home/assaf#

  Read the article

• CUPS causes printer to click and doesn't print

  - by Pez Cuckow

  I'm suffering a strange problem with my Cannon iP4850 when trying to use CUPS on a Raspberry Pi (this is not RPi specific, please do not vote to move it). When I plug the printer into my Laptop (OSX) or my Desktop W7 it identifies as a iP4800 and prints perfectly. So I plug it into the Pi (running debian), set it up in CUPS enable sharing and can now see the iP4800 series shared on the network. However if I print to it (using AirPrint etc...); the file gets to CUPS safely (shows in the queue) but when it tries to print the printer clicks (like a loud thunk) 3/4 times and then gives in, with a double amber flashing light. In cups it shows as job completed. Do you know why using the pi and cups would cause what appears to be a hardware fault and what I can do to fix the problem or to provide further debug info? Thanks for your time! Description: Canon iP4800 series Location: Lounge Driver: Canon PIXMA iP4800 - CUPS+Gutenprint v5.2.9 (color, 2-sided printing) Connection: usb://Canon/iP4800%20series?serial=2239B2 Note: I've tried deleting and re-adding the printer to the Laptop, Desktop and PI and the results are always the same Log for plugging in printer and printing (attempting to) something until the printer turned off again pi@pezpi /var/log $ dmesg [ 7284.176336] usb 1-1.2: new high speed USB device number 8 using dwc_otg [ 7284.279703] usb 1-1.2: New USB device found, idVendor=04a9, idProduct=10d5 [ 7284.279750] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7284.279771] usb 1-1.2: Product: iP4800 series [ 7284.279786] usb 1-1.2: Manufacturer: Canon [ 7284.279800] usb 1-1.2: SerialNumber: 2239B2 Setting cups to verbose: Change loglevel in cupsd.conf to debug (or debug2) pi@pezpi /var/log $ sudo vim /etc/cups/cupsd.conf pi@pezpi /var/log $ sudo /etc/init.d/cups restart [ ok ] Restarting Common Unix Printing System: cupsd. pi@pezpi /var/log $ Log from $ /var/log/cups/error_log is at http://pastebin.com/7VZMRMrG (too large to post here) The log contains - in order (deleted the log and then did the beneath) Restarting the cups server Attempting to print a test page x2 Printing from 192.168.1.90 via AirPrint Printing from 192.168.1.90 via Network Print Turning the printer off and on again

  Read the article

• Can Safari 5.1 for Mac OS display favicons for bookmarks in the Bookmarks Bar?

  - by Greg R.

  When bookmarking a web site, most contemporary browser will display the site's favicon next to the bookmark, both in the bookmark view and the bookmark toolbar. This is a useful feature. In the bookmark toolbar you can edit the name of the bookmark to be blank, effectively leaving the favicon there as an easily identifiable "button" from which to launch the bookmark. This allows you to make more effective user of the space in the bookmark toolbar. I use this approach effectively in Firefox, Chrome, and IE. For example, here is a portion of my Bookmarks Toolbar from Firefox: However, in Safari, no favicon is ever displayed for bookmarks. In the full bookmark view only a generic globe icon is displayed. In the Bookmark Bar in Safari, no icon at all is displayed. Which means the habit of removing the bookmark name & leaving the favicon is useless. Here's what the same configuration (synced between browsers via Xmarks) looks like in Safari. That blank space is where the favicons should be. The boomark is there -- if you hover over it, the blank space changes color to indicate the presence of a bookmark and a tool tip will with the URL will pop up after about two seconds. However, it's really quite unusable. So. The question: is there an extension, plug-in, or modification of some sort that will enable the display of favicons for bookmarks in Safari (OS X Lion 10.7.3 , Safari version 5.1.3)?

  Read the article

• Philips Monitor problems - vertical lines on screen

  - by asdasd

  I have an old CRT Philips Monitor 17'' and it was working well. There were problems with the electrical power and the monitor started to make some sound and a smoke was getting out of it. I quickly switched it off the power, and in the morning when the power was ok i started the monitor and it appeared to be working and it worked for a couple of minutes when i find out some smell was coming from it, and after 5 minutes the screen i was working shut down and on the monitor some vertical lines appeared - and nothing else. I thought it was the OS, so i rebooted the pc and while it was booting i realized the monitor didn't show the bios info etc, but the same vertical lines on the whole screen were on it, sometimes their color was changing and they were blinking, but no screen appeared - only those vertical lines. After a day, the monitor was ok again - i turned it on and no there were no lines, everything was working fine. The same for the next 2 days. My question is: If anyone had ever had the same problem, can you help me ? THe monitor may be ok now but i am afraid it can get back those lines again. I don't know what to do, if you know please tell me whether should i take it to the service or not. Thank you.

  Read the article

• How to crop Screen Recordings under Snow Leopard?

  - by willc2

  Quicktime Player for Snow Leopard now allows you record the screen. Awesome! Once you have a movie it will let you trim screen recordings for length. Is there a way to crop the movie's dimensions, either in QT or using some built-in or free software? Update: How to crop to an arbitrary size and aspect ratio? iMovie only seems to let you crop to the aspect ratio of the containing project. Result: Both good answers but since I have QuickTime Player 7 and Photoshop, that's the workflow I choose as the answer. NOTE: If you have Photoshop Extended, you can import a movie, use the crop tool, and Export the cropped movie. Not free or built-in, but convenient. To summarize the instructions from the video link ricbax posted: Open movie in QuickTime Player 7 Copy a frame and Paste it into a new document in Photoshop Draw a rectangular selection around the area to keep and fill with black Invert the selection and fill with white Save as .GIF, with 2 colors Back in QuickTime Player 7, open Movie Properties window Select the Video Track Select the Visual Settings Tab Drag and Drop the 2-color .GIF file onto the Mask drop area (or use choose file button) Export the (now cropped) movie DONE

  Read the article

• Facing error: "Could not open a connection to your authentication agent."; trying to add ssh-key.

  - by Kaustubh P

  I use ubuntu server 10.04. ssh-add /foo/cert.pem gave the following output Could not open a connection to your authentication agent. These are my running processes: ps -aux | grep ssh Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html root 1523 0.0 0.0 49260 632 ? Ss Dec25 0:00 /usr/sbin/sshd root 10023 0.0 0.3 141304 6012 ? Ss 12:58 0:00 sshd: padmin [priv] padmin 10117 0.0 0.1 141304 2400 ? S 12:58 0:00 sshd: padmin@pts/1 padmin 11867 0.0 0.0 7628 964 pts/1 S+ 13:06 0:00 grep --color=auto ssh root 31041 0.0 0.3 141264 5884 ? Ss 11:24 0:00 sshd: padmin [priv] padmin 31138 0.0 0.1 141264 2312 ? S 11:25 0:00 sshd: padmin@pts/0 root 31382 0.0 0.3 139240 5844 ? Ss 11:26 0:00 sshd: padmin [priv] padmin 31475 0.0 0.1 139372 2488 ? S 11:27 0:00 sshd: padmin@notty padmin 31476 0.0 0.0 12468 964 ? Ss 11:27 0:00 /usr/lib/openssh/sftp-server These are my environment variables: $ env | grep SSH SSH_CLIENT=192.168.1.13 42626 22 SSH_TTY=/dev/pts/1 SSH_CONNECTION=192.168.1.13 42626 192.168.1.2 22 What is wrong? Why cant I add any identities? Thanks.

  Read the article

• RDP Connection to Windows 7 stays really slow

  - by Pavlo

  I have an Issue with connecting to Windows 7 via RDP. I can open an RDP Session, but regardless of any settings, the responce times are really long. This in particulary is the case when opening a web page in a browser. I've tried IE, Firefox and Google Chrome. I also use RDP connection to a Windows 2008 Server from the same client machine, and the speed is very normal with all features turned on. We have Gigabit Ethernet here. So I think it can not be the client's fault. What concerns Windows 7 Machine, I've tried shutting all the sraphic features off and turning the color levels to 256 colors. Result - the same. If I work locally on the machine - I can not see any lags. What else have I tried: Using old RDP 5 Client from Microsoft Setting network autotuninglevel as seen here Do You have some ideas? Thanks in advance! Update the problem seems to be with rendering window contents. All the window borders and pannes are rendered pretty quickly, but the content shows up very slowly. Also mouse movements are recognised by the Win 7 box only after some period. Are there some hidden settings in the RDP, where one could turn some advanced features off or turn some caching on? I use Bitmap Caching, but this apparently doesn't help.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >