Search Results

Search found 30658 results on 1227 pages for 'off screen'.

Page 306/1227 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• Monitor does not work past certain resolution.

  - by Steve Stifler

  I have a Macbook 5.1 with Snow Leopard, and a Samsung SyncMaster 2253BW that I use for an external monitor. I connect it to my laptop via a DVI-to-MiniDisplayPort adapter. Whenever I try to set the resolution of the monitor to 1680x1050, its maximum resolution (at least the only one that fills the entire screen), the screen flickers once or twice before claiming there is no source attached. I've had this issue since the first time I tried to connect the two, however for some reason for a brief period in time the monitor would successfully display at full resolution. All lower resolutions work fine too, it's just at 1680x1050 that the problems occur. Any ideas as to why this is happening? Thanks.

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• Windows 8 Metro UI with Multiple Monitors -- Keep in always maximized?

  - by Jersey Dude

  Before installing Win 8 today, my plan was to keep the Metro UI up on my smaller, laptop monitor and have the classic UI running on my two larger monitors. However, in reality, as soon as I click on something in one of the classic UI monitors, the Metro UI minimizes (thus exposing the classic UI in its place). Is there any way to keep the Metro UI from minimizing when I do something in another monitor? Oddly enough, if there is an app running/suspended in the Metro Window, then the Metro UI is not minimized. If the Start screen is currently viewed, clicking in a classic window/monitor switches the Metro UI from the start screen to the last run app. Very peculiar .. Thanks

  Read the article

• Lost Root and other user passwords

  - by Webnet

  This isn't a huge deal, because there's very little on the server (literally a file or two) that we actually need off of it. But we disabled root logins as a security measure and can't remember any of our other user passwords. I'm assuming that there's nothing we can do at this point to get into the server? I'm sitting next to the box... Update Oops... actually, I need to export an SVN off of this server. So yeah, there's stuff I need.

  Read the article

• tunneling x11vnc through ssh on a non standard port to ubuntu computer tightvnc

  - by user72372

  I have been stuck with setting up my virtual desktop on my ubuntu laptop. I am running ubuntu to ubuntu with x11vnc I start the process on my laptop as follows: " ssh -L5904:localhost:5900 -p Port remoteuser@remoteip." That command works, then I start x11vnc server, "x11vnc -noncache -once -shared -rfbauth ~/.vnc/passwd." This command works and starts connection. Then I open another window on my laptop and type, export VNC_VIA_CMD='/usr/bin/ssh -2 -c aes128-cbc -x -p Port -l User -f -: %L:%H:%R %G sleep 20' (not sure if works). then I type, vncviewer -endcodings Tight -depth 8 -quality 1 -via IPofremotemachine -u remoteuser localhost:01. The first time it work but from now on it just gives me the vncviewer -help screen everytime. I type in the password for my remote machine and then shows -help screen for vncviewer. I think the problem is with Tightvnc viewer but don't know what. Please help. I got some info on www.vanemery.com/Linux/VNC/vnc-over-ssh.html?.

  Read the article

• bash shell script which adds output of commands

  - by John Kube

  Let's say I have a command called foo which prints a number to the screen when called: $foo 3 Let's also say I have another command called bar which prints another number to the screen when called: $bar 5 I'm looking to write a shell script which will add together the output of foo and bar. How would I do that? (The outputs from the commands are not known ahead of time. They just so happen to have been 3 and 5 the last time they were run. They could have been something else.) Thanks!

  Read the article

• Collision with half of a semi-circle

  - by heitortsergent

  I am trying to port a game I made using Flash/AS3, to the Windows Phone using C#/XNA 4.0. You can see it here: http://goo.gl/gzFiE In the flash version I used a pixel-perfect collision between meteors (it's a rectangle, and usually rotated) that spawn outside the screen, and move towards the center, and a shield in the center of the screen(which is half of a semi-circle, also rotated by the player), which made the meteor bounce back in the opposite direction it came from, when they collided. My goal now is to make the meteors bounce in different angles, depending on the position it collides with the shield (much like Pong, hitting the borders causes a change in the ball's angle). So, these are the 3 options I thought of: Pixel-perfect collision (Microsoft has a sample) , but then I wouldn't know how to change the meteor angle after the collision 3 BoundingCircle's to represent the half semi-circle shield, but then I would have to somehow move them as I rotate the shield. Farseer Physics. I could make a shape composed of 3 lines, and use that as the collision object for the shield. Is there any other way besides those? Which would be the best way to do it(it's aimed towards mobile devices, so pixel-perfect is probably not a good choice)? Most of the time there's always a easier/better way than what we think of...

  Read the article

• Connecting / disconnecting DisplayPort causes crash

  - by iGadget

  I wanted to file a bug about this using ubuntu-bug xserver-xorg-video-intel, but the system prompted my to try posting here first. So here goes :-) While the situation in Ubuntu 11.10 was still somewhat workable (see UI freezes when disconnecting DisplayPort), in 12.04 (using Unity 3D) it has gotten worse. The weird part is that during the 12.04 beta's, the situation was actually improving! I was able to successfully connect and disconnect a DisplayPort monitor without the system breaking down on me. But now with 12.04 final (with all updates), it's just plain terrible. When I now connect an external monitor using the DisplayPort connector on my HP ProBook 6550b, it only works sometimes. Most times (but not always!) the screen just goes blank and the system seems to crash (not even CTRL+ALT+F1 works anymore). Only a hard shutdown by keeping the power button pressed for several seconds and then a restart gets me out of this. I suspect the chances of the system crashing become higher as the system's uptime increases, especially when there have been one or more suspend-resume cycles (although I have also experienced this bug once from a cold boot). Disconnecting is roughly the same as with 11.10 (see issue mentioned above), with the difference that if I resume from suspend, I no longer have to do a CTRL+ALT+F1, ALT+F7 cycle to get my screen back. So what more can I try? Or should I just go ahead and file the bug anyway?

  Read the article

• Views : ViewControllers, many to one, or one to one?

  - by conor

  I have developed an Android application where, typically, each view (layout.xml) displayed on the screen has it's own corresponding fragment (for the purpose of this question I may refer to this as a ViewController). These views and Fragments/ViewControllers are appropriately named to reflect what they display. So this has the effect of allowing the programmer to easily pinpoint the files associated with what they see on any given screen. The above refers to the one to one part of my question. Please note that with the above there are a few exceptions where very similar is displayed on two views so the ViewController is used for two views. (Using a simple switch (type) to determine what layout.xml file to load) On the flip side. I am currently working on the iOS version of the same app, which I didn't develop. It seems that they are adopting more of a one-to-many (ViewController:View) approach. There appears to be one ViewController that handles the display logic for many different types of views. In the ViewController are an assortment of boolean flags and arrays of data (to be displayed) that are used to determine what view to load and how to display it. This seems very cumbersome to me and coupled with no comments/ambiguous variable names I am finding it very difficult to implement changes into the project. What do you guys think of the two approaches? Which one would you prefer? I'm really considering putting in some extra time at work to refactor the iOS into a more 1:1 oriented approach. My reasoning for 1:1 over M:1 is that of modularity and legibility. After all, don't some people measure the quality of code based on how easy it is for another developer to pick up the reigns or how easy it is to pull a piece of code and use it somewhere else?

  Read the article

• How to add display resolution fo an LCD in Ubuntu 12.04? xrandr problem

  - by SeregaI

  I am fresh for Ubuntu and Linux in general. I have installed Ubuntu 12.04 and stuck trying to setup correct resolution for my LCD display. The native resolution for the LCD is 1920x1080 here is the output from xrandr: $xrandr Screen 0: minimum 320 x 200, current 1280 x 720, maximum 4096 x 4096 LVDS1 connected 1280x720+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x720 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) Then I create new modeline: $ cvt 1920 1080 60 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync So far so good. then I create new mode using xrandr: $ xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync But for some reason that new mode was created for VGA (VGA1) output instead of LCD output (LVDS1): $ xrandr Screen 0: minimum 320 x 200, current 1280 x 720, maximum 4096 x 4096 LVDS1 connected 1280x720+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x720 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) 1920x1080_60.00 (0xbc) 173.0MHz <---------- ????!!!!!! h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz So, if I try to add mode to LVDS1, I get an error: $ xrandr --addmode LVDS1 "1920x1080_60.00" X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 149 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 25 Current serial number in output stream: 26 Adding that new mode to VGA1 works fine, but I don't use that VGA1 output.

  Read the article

• Nginx & Apache Cannot get try_files to work with permalinks

  - by tcherokee

  I have been working on this for the past two weeks not and for some reason I cannot seem to get nginx's try_files to work with my wordpress permalinks. I am hoping someone will be able to tell me where I am going wrong and also hopefully tell me if I made any major errors with my configurations as well (I am an nginx newbie... but learning :) ). Here are my Configuration files nginx.conf user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## # Defines the cache log format, cache log location # and the main access log location. log_format cache '***$time_local ' '$upstream_cache_status ' 'Cache-Control: $upstream_http_cache_control ' 'Expires: $upstream_http_expires ' '$host ' '"$request" ($status) ' '"$http_user_agent" ' ; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } mydomain.com.conf server { listen 123.456.78.901:80; # IP goes here. server_name www.mydomain.com mydomain.com; #root /var/www/mydomain.com/prod; index index.php; ## mydomain.com -> www.mydomain.com (301 - Permanent) if ($host !~* ^(www|dev)) { rewrite ^/(.*)$ $scheme://www.$host/$1 permanent; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # All media (including uploaded) is under wp-content/ so # instead of caching the response from apache, we're just # going to use nginx to serve directly from there. location ~* ^/(wp-content|wp-includes)/(.*)\.(jpg|png|gif|jpeg|css|js|m$ root /var/www/mydomain.com/prod; } # Don't cache these pages. location ~* ^/(wp-admin|wp-login.php) { proxy_pass http://backend; } location / { if ($http_cookie ~* "wordpress_logged_in_[^=]*=([^%]+)%7C") { set $do_not_cache 1; } proxy_cache_key "$scheme://$host$request_uri $do_not_cache"; proxy_cache main; proxy_pass http://backend; proxy_cache_valid 30m; # 200, 301 and 302 will be cached. # Fallback to stale cache on certain errors. # 503 is deliberately missing, if we're down for maintenance # we want the page to display. #try_files $uri $uri/ /index.php?q=$uri$args; #try_files $uri =404; proxy_cache_use_stale error timeout invalid_header http_500 http_502 http_504 http_404; } # Cache purge URL - works in tandem with WP plugin. # location ~ /purge(/.*) { # proxy_cache_purge main "$scheme://$host$1"; # } # No access to .htaccess files. location ~ /\.ht { deny all; } } # End server gzip.conf # Gzip Configuration. gzip on; gzip_disable msie6; gzip_static on; gzip_comp_level 4; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; proxy.conf # Set proxy headers for the passthrough proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; add_header X-Cache-Status $upstream_cache_status; backend.conf upstream backend { # Defines backends. # Extracting here makes it easier to load balance # in the future. Needs to be specific IP as Plesk # doesn't have Apache listening on localhost. ip_hash; server 127.0.0.1:8001; # IP goes here. } cache.conf # Proxy cache and temp configuration. proxy_cache_path /var/www/nginx_cache levels=1:2 keys_zone=main:10m max_size=1g inactive=30m; proxy_temp_path /var/www/nginx_temp; proxy_cache_key "$scheme://$host$request_uri"; proxy_redirect off; # Cache different return codes for different lengths of time # We cached normal pages for 10 minutes proxy_cache_valid 200 302 10m; proxy_cache_valid 404 1m; The two commented out try_files in location \ of the mydomain config files are the ones I tried. This error I found in the error log can be found below. ...rewrite or internal redirection cycle while internally redirecting to "/index.php" Thanks in advance

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• Display Problems running Ubuntu 12.04 in Windows VMware Player

  - by Alex Reynolds

  I am posting this again because I have changed to VMWare Player and I discovered something new. I am running Ubuntu 12.04 LTS (Guest) in VMWare Player 6.0.2 on Windows 7 64-bit Host. I have VMWare Tools installed properly. I am running MATE but the problem persists when I change (to and from) xfce, gnome, mate a-- and back again I had been using this for a couple of years without any graphics issues. After an Ubuntu update (typical) -- my video is corrupt and will not refresh correctly. My desktop icons are "mirrored" and when I open a terminal window (for instance) -- sometimes -- the window appears multiple times. Of course, only one is the real image. It seems to be a refresh problem. When I move an active window around the screen the "older" images "erase" and my icons (for instance) are in the correct location. For instance, I can move the terminal around a pretty corrupted window and the screen behind it is repainted correctly. NEW: Next, I got the idea to try and Remote Desktop in to the Ubuntu 12.04 LTS Guest OS from my Windows 7 64-bit Host. Once working, and connected via Win RDC -- using MATE as default in my /etc/xrdp/startws.sh -- my video is not corrupted and works fine (as in the past). Any ideas about what is going on ? or how to fix this ?

  Read the article

• Have to reset wireless frequently on iPad / Macs connected to Cisco WRV200

  - by retailevolved

  I have a Cisco WRV200 set up in our small office. The wireless signal works great for PCs, but I have found that Macs and iPads have to frequently reset the connection. It will be working for about 10 minutes, then stop. To fix it, I just turn off Airport and turn it on again. On an iPad, I have to go into settings, shut the wireless off, and then turn it on again. The router is broadcasting mixed B/G on channel 6. Security is WPA-PSK2. Anybody out there had similar issues with their router? How can I fix it?

  Read the article

• Can I find the session ID for a user logged on to another machine?

  - by Dan

  I want to open an application on another computer on the same network via the command line. The scenario here is that the user is in a room surrounded by about 20 computers and wants to be able to launch the same app on every computer without walking from screen to screen opening it up on each individual machine. I've discovered that I can get the basic functionality for this using PsExec as follows: psexec \\[computer] -u [username] -p [password] -d -i [SessionID] [program] For computer, username, password, and program, I'm good. Does anyone know of a way I can figure out which SessionID is assigned to a particular user logged on to a particular machine on the network? Alternately, is there a better way to go about what I'm trying to accomplish?

  Read the article

• Transfer Win8 user settings between profiles [closed]

  - by GlennFerrieLive

  Possible Duplicate: How do I sync grouped Windows Store apps between devices? Is there a way for me to copy/save/transfer my "start menu" configuration, meaning the grouping and ordering of the elements on the Start screen, between user profiles? Is it in the registry? I am open to manual or "coded" suggestions. UPDATE: I'd like to VETO this closing. I am aware of the "roaming" profile behavior. I want to COPY my configuration BETWEEN profiles on the same machine.... DIFFERENT profile DIFFERENT person. I like the way my start screen is set up. i want to set my wife up with the same layout.

  Read the article

• Where is he now?

  - by Chris G. Williams

  A couple months ago, I announced I was leaving Magenic in order to take a break from consulting. I figured I'd post an update as to what I'm doing now, since I haven't exactly been slacking off.1) I accepted a position as a Lead Developer with RealPage. I work on a number of internal use applications for a subsidiary known as LevelOne. The majority of my work is in ASP.NET, a surprising amount of VB.NET, some C# and I'm picking up a few new tools for my belt... specifically Python, MongoDB and Perl.2) I am still the owner of Big Robot Games, a retail game store / coffee shop in the South Carolina upstate region. I'm not as involved in the day to day activity as I was, but I'm there most nights and weekends, when I'm not off doing other things, like #3.3) I am on the staff of Rock Revolt Magazine as a journalist, covering live performances as well as interviewing bands, providing album & video game reviews, fixing the website and the occasional prison ink. (Just kidding on that last one.)4) In whatever time is leftover, I still manage to bang out a little code on Heroic Adventure! (aka HA!) and talk about Windows Phone, XNA and whatever else suits me, wherever they'll let me.I guess that's about it.

  Read the article

• Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

• Nginx, proxy passing to Apache, and SSL

  - by Vic

  I have Nginx and Apache set up with Nginx proxy-passing everything to Apache except static resources. I have a server set up for port 80 like so: server { listen 80; server_name *.example1.com *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/conf.d/proxy.conf; } } And since we have multiple ssl sites (with different ssl certificates) I have a server{} block for each of them like so: server { listen 443 ssl; server_name *.example1.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8443; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } server { listen 443 ssl; server_name *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8445; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } First of all, I think there is a very obvious problem here, which is that I'm double-encrypting everything, first at the nginx level and then again by Apache. To make everything worse, I just started using Amazon's Elastic Load Balancer, so I added the certificate to the ELB and now SSL encryption is happening three times. That's gotta be horrible for performance. What is the sane way to handle this? Should I be forwarding https on the ELB - http on nginx - http on apache? Secondly, there is so much duplication above. Is the best method to not repeat myself to put all of the static asset handling in an include file and just include it in the server?

  Read the article

• X200 Tablet notebook won't start after BIOS Update

  - by THEn

  I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

  Read the article

• My computer will not reboot after fresh install of ubuntu 12.04LTS

  - by user170715

  I bought a new computer yesterday and it came with Windows 8. When installing Ubuntu, i choose the erase and install option thinking that Ubuntu would install easily like it did for my old laptop... After a successful install and following the instructions telling me to reboot to finish installation and remove installation media. It worked and my computer booted fine, however once I began installing updates via update manager and activating additional driver {ATI/AMD proprietary FGLRX graphics driver (post-release updates)} out of the following: Experimental AMD binary Xorg driver and kernel module ATI/AMD proprietary FGLRX graphics driver (*experimental*beta) ATI/AMD proprietary FGLRX graphics driver (post-release updates) Then reboot to finish making changes I reboot and get an error (Reboot and select proper boot device) At this point I was stuck, so I eventually reinstalled ubuntu and repeated the exacted same steps until right before i rebooted to finish making changes. However this time i used this Boot Repair tool sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair After running the program i get a "boot successfully repaired" message. Then I try to reboot again and get the GNU Grub screen where it says would you like to boot: normal recovery memorytest Once it begins loading, you see the code moving across the screen then it pauses when it gets to and doesnt do anything. If someone could tell me how to fix this or get Windows 8 back soon, I'd appreciate it because like i said i just bought it yesterday and now i cant even use it.

  Read the article

• How do I remove a malformed line from my sources.list?

  - by eminencejae

  I have unistalled and reinstalled the Ubuntu Software Center as per info I found in a similar thread and I got the same response about line 91 or something like that. I just tried to upload a screen shot but since I'm new it won't allow me to. I also can not figure out how to cut and paste anything so I have to hand type what the error screen says, both when I attempt to open the software center and nothing happens, when I try to enter commands into the terminal to uninstall, reinstall, whatever I get the same following: COULD NOT INTITIALIZE THE PACKAGE INFORMATION An unresolvable problem occured while initializing the package information Please report t:his bug against the 'update-manager' package and include the following error message: 'E: Malformed line 91 in source list/etc/apt/sources.list (dist parse) E: The list of sources could not be read., E: The package list of status file could not be parsed or opened. How do I report bugs? What can be done about this. I have searched and everything everyone says to do leads me back to the same line error message. So, I don't know how to get to line 91 in the source list; to tell you what it says. Sorry, I'm really new to this. That is what I need is to find out how to get there and fix what it says. I would really like to NOT have to re partition my hard drive and start from scratch, so I'm really looking forward to getting this problem solved. I need to be able to install new software.

  Read the article

• how to customize debian installation cd for your needs

  - by Frank

  I have with me a Debian CD, which I want to customize for my own needs. I have extracted the CD and started to change some parts of it, e.g Splash screen (splash.png) installer Title (through isolinux.cfg) etc These are the things that I want to do: Change the Splash logo at start up of installation to have my own (which is done) Change the grub boot parameters to use my comapny name on it. Change the set of packages in it, so that I can have my own set of packages in it and only those packages are installed Do some post installation steps Customize it's startup and login screen to have my company name. After I am done with this customization, I need to build its live installer CD so that I can install it on my own, on any other system.

  Read the article

• Ubuntu on Samsung NP700Z5B - no Grub

  - by copolii

  I just bought a Samsung NP700Z5B laptop. Gorgeous machine and great performance! I do 2 things when I get a new laptop: Format the HD and install Winblows from a CD to ditch the bloatware Install some variant of Linux on it (lately Ubuntu) Step 1 worked fine (until earlier today), but I haven't been able to install Ubuntu on it for the past 3 days! I've tried Mint12, Ubuntu 12.04, Ubuntu 11.10, Ubuntu 11.04 and Ubuntu 10.04. The live CD and the installations all run fine and report no problems, but when I reboot grub is nowhere to be found! The system goes directly to Winblows! I've tried booting from the liveCD and re-installing grub via the chroot and purge & reinstall methods (https://help.ubuntu.com/community/Grub2) and neither makes a difference. I've also tried copying the boot sector: dd if=/dev/sda of=linux.bin bs=512 count=1 and putting it on c: then setting bcdedit to add the entry to the Windows bootloader with no results. Earlier today I decided to try and set my boot partition as an EFI boot partition ... bad choice, now I don't even have the Winblows boot loader. I've officially ran out of ideas. Tried calling Samsung, but they're closed (they'd probably say something stupid along the lines of "Samsung recommends Windows 7" ... I've had Dell say that to me). Any help would be greatly appreciated. Update 1 Tried re-installing 12.04 and now I get the screen continously turning off and back on, but still no sign of booting ... it has been doing it for 15 mins so far (I set the boot partition type to ext2 instead of ext4) Update 2 Well ... this just gets better and better. I inserted the installation USB key to reboot it and the flickering stopped for about a minute (remained on) then it started turning off and on again

  Read the article

• XNA 2D Spritesheet drawing rendering problem

  - by user24092

  I'm making a tile-based game, using one spritesheet containing all tile graphics. Each tile has a size of 32x32 pixels. The main problem is: when I draw the tile to the screen, if the tile position x and y are not rounded or if scale is activated in spriteBatch.Draw() method (scale != 1.0f), I get some lines of adjacent tiles on the spritesheet into the current tile drawed. I already tried setting SamplerState to PointClamp, removing AntiAlias, but still doesn't work. Here I'll show images of some tests that I made, with a test sprite sheet that I've created (I made a 9x9 spritesheet, with each sprite of size 32x32 containing a unique solid color). Tests: http://img6.imageshack.us/img6/5946/testsqj.png SpriteSheet used: http://imageshack.us/a/img821/1341/tilesm.png Already tried to remove anti-alias, set PointClamp as sampler state, but still getting this issue, XNA keeps drawing part of the adjacent pixels of the texture on the screen. What I want is to get the correct area of the tilesheet texture (as seen in the first test, that gets just the yellow pixels). My question is: Is there any way that I can fix this, WITHOUT adding tile spacing or any other modification involving the tilesheet? Maybe disabling a texture filtering that is done by XNA, or something like that.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >