Search Results

Search found 11025 results on 441 pages for 'f4r 20'.

Page 309/441 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

• How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

  - by Todd V. Rovito

  I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

  Read the article

• SQL Server log backups “stalling”

  - by MattK

  I have interited a box running SQL Server 2008 and Windows 2003, and have had a few events where largeish (35GB) log backups "stall", both before and after the installation of SQL 2008 SP1. The server log ships to a standby, so regular log backups are taken at 15 minute intervals. However, after an index reorg causes the log to grow to about 35GB (on a DB with about 17GB of data), the next log backup runs to ~95% completion, then seems to stop. The process shows as suspended, with a wait state of BACKUPIO. CPU, read, and write activity on the SPID also does not change, and the process stays in this state for hours, when normally a backup of this size should complete in about 20 minutes. This server has a single RAID-1 volume, thus the source database files and destination backup files are on the same volume. However, I cannot determine if another process is blocking the backup. The backup SPID cannot be killed, and the only way to terminate the log backup and clear the lock on the backup file is to cycle the SQL Server service. There was one event where the backup terminated completely, with an error that another process had locked the backup file, but no details about what that process was. Can anyone suggest a cause or diagnostic process to this situation?

  Read the article

• One workstation gets slow access to the server, but others are fast

  - by Mike Hanson

  I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

  Read the article

• Why are SIP calls via my server silent?

  - by Archcode

  I have FreeSWITCH SIP server up and running. It has public IP and sits behind 1-to-1 NAT (it's Amazon EC2 instance actually). I can connect to it, make a call to other endpoint (namely, my android device to my pc and vice versa) and signals are send with no problems (call, answer, hangup, etc). Unfortunately, and what drives me crazy, that's all: no audio gets through, no video either. Server does not throw errors, it reports many retransmission though, looks like this: switch_rtp.c:915 [ zrtp engine]: WARNING! HELLO Max retransmissions count reached (20 retries). ID=15 Codecs are set up correctly (same config worked locally on my LAN). NAT/firewall on client side may be a problem, signals do get through (perhaps due to fixed port, data streaming runs on random one, that is currently my best bet). STUN/TURN/ICE setting on client seem to have no effect. Endpoints sit behind symmetric NAT. On server there are no iptables rules, security group is set as suggested there: http://wiki.freeswitch.org/wiki/Firewall Help, please. How to make it work or at least diagnose what's wrong?

  Read the article

• FreeBSD jail IMAP/MTA config recommendations

  - by kobame

  I've got access to my "own" FreeBSD jail. The jail has only basic, unconfigured system, but I have full access to FreeBSD ports, and (jail)root too. Now I need to setup my jail as IMAP/MTA. The question: What packages are EASIEST for config and later administration, (the simplest possible setup, with the minimum needed configuration) when: i haven't any preferences (don't know any yet) my (one) domain is managed by ISP, so don't need DNS need only IMAP for few users (up to 20 mailboxes) need secure transport layer (IMAPS/993) password auth, no LDAP, no kerberos, nor databases, nothing like fancy things... need easy-setup easy-admin MTA, with simplest possible password SMTP auth, (again no LDAP, nor DB), secure transport layer but would be nice have virus-scan and some anti-spam protection So, what ports I should install for MTA and IMAP? MTA (Sendmail, Postfix, Exim)? antivirus (ClamAV) antispam??? IMAP(S), (Dovecot, Courier) when the main criteria are: easy setup, and easy administration. When I googled I found only complicated setups for thousands of users with LDAP, databases and so on - too big-caliber for my small (easy?) needs. Any pointer to an easy howto is very welcomed.

  Read the article

• Windows 7 mouse multi selection on windows explorer with CTRL and point to select / single click to open

  - by bortao

  This is something that have annoyed me since i changed to Windows 7. I don't do double click for a long time now since windows introduced 1 click selection (Folder Options Click items as follows Single click to open an item). The problem is, when i click Control and hover over the items, they select/deselect automatically every small amount of mouse movement i make. What i want is to select/deselect the items only when i enter/exit them. So to deselect an item im hovering, i have to move the mouse out of it, and then back in. I'm using Intellimouse Explorer official drivers. (edit) Here's another related annoyance: When you are hovering something and move the mouse inside other item (Holding Ctrl) The new item may or may not be selected. If you continue moving the mouse it gets selected/deselected as you move. (more edit) I have found that the parameter HKCU\Control Panel\Mouse\MouseHoverHeight / MouseHoverWidth have some influence here. If it's set to 2, the item select/deselect really quickly as you move the mouse. When set to larger numbers, its slower. But setting to 20 or 200 don't seem to be much different.

  Read the article

• Outlook 2010 Crashing Unpredictably

  - by cbkadel

  Very often when I open up Outlook 2010 and start doing actions in it, it will hang and become non responsive. I have tried letting it finish, but it never does come back (up to 20 minutes of letting it try). I generally have to restart Outlook and try again. Usually after about an hour of doing this, Outlook somehow snaps out of it and works for the rest of the day. It's generally in the morning (though I doubt that's the key variable). Generally, the emails that cause problems are HTML/formatted, but not always. What I've done so far to troubleshoot: Install Latest Outlook Hotfix (I think Dec 14, 2010) Start Outlook in Safe Mode Neither of those steps seem to make a difference. Usually - after about 10-15 restarts of Outlook on any given day, then it starts working thereafter. My next step is to uninstall/reinstall Office 2010, but I'm hoping someone has seen this and knows what to do about it - though not sure. My configuration is like this: Microsoft Online Services (using Microsoft's Sign In App) - Connecting to Exchange I have two other Exchange accounts in this profile (new feature in 2010) connected through Outlook Anywhere. Life Meeting Conferencing Add In I've disabled the People tab/add in. I've disabled the "Send to Bluetooth" add-in. Not sure what else to do?

  Read the article

• saving data from a failing drive

  - by intuited

  An external 3½" HDD seems to be in danger of failing — it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach. I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors. Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all. The filesystem of the partition is ext3.

  Read the article

• Windows Server 2008 IIS7 - page requests randomly hang or timeout

  - by seb835

  I've just installed a fresh copy of Windows Server 2008 x64 with IIS7 and PHP (fast CGI). However, I'm noticing that after moving my web site from a similarly specified machine to this one, I'm getting issues. The issue seems to be that randomly, as I'm clicking through the web pages being served, the browser will suddenly hang saying "waiting for mysite.com...". Sometimes the page will then timeout, or finally resolve after 20 to 30 seconds, but maybe missing the CSS style sheet. Very strange, as this is the only website installed on this new server, and only myself using/testing it. Server is installed in the same data centre below the old server. Has anyone else had a similar problem? I tried increasing the max workers pool to 10 (from 1), but this has no effect. Seems to happen most frequently after 1 or 2 minutes of inactivity on the website, then trying to load/refresh a web page. Many thank for any info and help. Kind Regards, Seb

  Read the article

• Netbook thinks it is a desktop

  - by Narcolapser

  Question: Are, and if so what, there packages for download that I can get netbook to understand it is not a desktop and that it is a netbook. Info: I'm running an Acer Aspire One with ubuntu desktop 9.10. I tried Ubuntu Netbook Remix first but it has graphics issues with the aspire one. So I changed to Ubuntu Desktop. It was the only distro (after debian, centOS, Fedora, and Knoppix all failed me) that I managed to get working. The only thing is that it is having issues doing things that a netbook/laptop should be doing. most notably is that it will run it's battery dead if I close the screen and throw it into my back pack. It seems to just stay fully on and runs it's self to death. also it will lock up some times if I close the screen and come back to it 10 or 20 minutes later. It also won't retain volume settings when I reboot, as well as screen brightness. and just a couple of other things that I can't quite put my finger on, but just seem amiss. like I said, Essentially my netbook thinks it is a desktop, how can I fix this? ~N

  Read the article

• Laptop + External Monitor: Possible to Scale Mouse-crossover Position?

  - by Brian Lacy

  I have a laptop with a 16" screen @ 1366x768 resolution, and a 24" external monitor at 1920x1200 resolution. I'm extending the Windows 7 desktop onto the other screen. The 24" is the secondary monitor, and is positioned so the bottom of that screen lines up with the bottom of the 16" screen. Currently, if I move the mouse to the top portion of the 24" screen, then move left, the mouse will stop at the edge of the 24" screen until I move it down far enough to get into the range of the 16" screen. So that's all pretty standard; but I'm wondering if there's any software out there that will allow me to "scale" the mouse-crossover position, such that if I'm at the TOP of the 24" screen and move left, the mouse will cross to the TOP of the 16" screen, whereas if I'm at the BOTTOM of the 24" screen, crossing over will position the mouse at the BOTTOM of the 16" screen. So then, if the mouse cursor is on the 24" screen at (x,y) position (10,600), and I move 20 pixels left, the mouse is now on the 16" screen at position (1356,384). Anyone know of such a solution?? Note: I also use Ubuntu, so if there's a solution to this for X, but not Windows, I'd be interested in that also.

  Read the article

• How to automatically start VM created by virt-manager?

  - by Jeff Shattock

  I have created a virtual machine with virt-manager that runs on kvm/qemu. The machine works well when started through virt-manager. However, I would like to be able to start and stop the VM through a script in init.d, so that it comes up and down along with the host. I need to have virt-manager show that the machine is running, and to be able to connect to its console through there. When I use the command line that is produced by running ps -eaf | grep kvm after starting the vm through virt-manager, I get some console messages about redirected character devices, but the machine does start and runs properly. However, I do not get any indication from virt-manager that it has started. How can I modify the command line to get virt-manager to pick up the running VM? Is there anything else about the command line that should change when starting outside of virt-manager? Command line is (slightly reformatted for readability): /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 1 -name BORON \ -uuid fa7e5fbd-7d8e-43c4-ebd9-1504a4383eb1 \ -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/BORON.monitor,server,nowait \ -monitor chardev:monitor -localtime -boot c \ -drive file=/dev/FS1/BORON,if=ide,index=0,boot=on,format=raw \ -net nic,macaddr=52:54:00:20:0b:fd,vlan=0,name=nic.0 \ -net tap,fd=41,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 \ -parallel none -usb -usbdevice tablet -vnc 127.0.0.1:1 -k en-us -vga cirrus

  Read the article

• Master does not appear to be a git repository error

  - by EmmyS

  I've inherited a position and instructions for creating a new git repository. Unfortunately I've run into problems and no one here knows what to do. Hoping someone can help me out. Here are the instructions I was left: Create a new repository: For these steps you need to be in the gitosis-admin repository, if you don't have it, in a suitable parent folder do: git clone [email protected]:gitosis-admin.git Edit gitosis.conf file - in gitosis-admin root, under [group base-repo] section, add the name of the new repo to the end of the "writable =" section. Commit change and push back to gitosis-admin master. For the next commands, my_new_project represents the name of your project mkdir my_new_project cd my_new_project git init Copy in any files you want to use to start the repo git commit -a -m "Initializing new repository" git remote add origin [email protected]:my_new_project.git git push master git push master:qa So I did 1 and 2, with no problem. It created a local folder on my machine called gitosis-admin. I edited the gitosis.conf file as indicated. But when I try to do step 3 (which I assume is git push gitosis-admin master) bash tells me that fatal: 'master' does not appear to be a git repository fatal: The remote end hung up unexpectedly What am I doing wrong?

  Read the article

• Computer wont start, just blinks on and off

  - by Ryan

  This is really strange. I had a comp that was working fine for over a year, then suddenly it started to shut off, it got so bad that I press the power button and in around 30 secs while booting windows it would shut off, then 20 secs... then 10 secs, then it refused to start all together. So I bought a new PSU (850w Thermaltake, the old one was 550w corsair) thinking that was the problem, I fitted the new PSU now and its the same thing, I press the power button and my fans start for a split second (they have led lights on them, so the lights come on) and then everything goes off again. I thought maybe it was my power button that was loose on my comp, luckily I had another chassis near by so I disconnected the powerSW from the old one and put ran the powerSW from the new chassis, press the power on the new chassis and same thing, it blinks for a split second and off again. Double checked connections from the PSU to the cpu power as well as board mobo power, its tight. It's pretty unlikely both the PSUs have the same exact problem so am lost... Suggestions?

  Read the article

• Nginx Multiple If Statements Cause Memory Usage to Jump

  - by Justin Kulesza

  We need to block a large number of requests by IP address with nginx. The requests are proxied by a CDN, and so we cannot block with the actual client IP address (it would be the IP address of the CDN, not the actual client). So, we have $http_x_forwarded_for which contains the IP which we need to block for a given request. Similarly, we cannot use IP tables, as blocking the IP address of the proxied client will have no effect. We need to use nginx to block the requested based on the value of $http_x_forwarded_for. Initially, we tried multiple, simple if statements: http://pastie.org/5110910 However, this caused our nginx memory usage to jump considerably. We went from somewhere around a 40MB resident size to over a 200MB resident size. If we changed things up, and created one large regex that matched the necessary IP addresses, memory usage was fairly normal: http://pastie.org/5110923 Keep in mind that we're trying to block many more than 3 or 4 IP addresses... more like 50 to 100, which may be included in several (20+) nginx server configuration blocks. Thoughts? Suggestions? I'm interested both in why memory usage would spike so greatly using multiple if blocks, and also if there are any better ways to achieve our goal.

  Read the article

• Why is piping dd through gzip so much faster than a direct copy?

  - by Foo Bar

  I wanted to backup a path from a computer in my network to another computer in the same network over a 100MBit/s line. For this I did dd if=/local/path of=/remote/path/in/local/network/backup.img which gave me a very low network transfer speed of something about 50 to 100 kB/s, which would have taken forever. So I stopped it and decided to try gzipping it on the fly to make it much smaller so that the amount to transfer is less. So I did dd if=/local/folder | gzip > /remote/path/in/local/network/backup.img.gz But now I get something like 1 MB/s network transfer speed, so a factor of 10 to 20 faster. After noticing this, I tested this on several paths and files and it was always the same. Why does piping dd through gzip also increase the transfer rates by a large factor instead of only reducing the bytelength of the stream by a large factor? I'd expected even a small decrease in transfer rates instead, due to the higher CPU consumption while compressing, but now I get a double plus. Not that I'm not happy, but just wondering. ;)

  Read the article

• MySQL Memory Limit Windows Server 2003

  - by Matt

  I am running MySQL 5.0.51a on Windows Server 2003 Standard Edition on an HP DL580 G4 with 3GB installed. One of my database tables has grown to 5.3 GB with an index file of 2.5 GB, which I believe is causing MySQL to be slow due to having to constantly load and unload the index file when updates are made to the table. The server itself seems to be performing OK because MySQL is only using about 500MB of memory (there are other apps running on the system, but MySQL uses the most memory). The table is fairly active with new records getting adding all during day but no deletes, ever. The MySQL server has up to 600 connections allowed, but only small number (10 or 20) would actually be writing to this table. I increased the memory limits in MySQL but since the max connections is so high I don't think I can give each connection 1GB without risking a problem. Is there some tuning that would let just certain connections get a lot of memory? So I have started to look for alternatives to avert the crisis I know is coming soon. Some of the options I have: Upgrade to Server 2003 Enterprise to install 64GB of memory. Question: would 32 bit MySQL be able to access more than 2GB? Would that be 2GB per thread? That would still be smaller than the index table size so it might not solve the problem completely, but it would be better than now. Upgrade to Server 200x 64 bit and MySQL 64 bit. Switch to a *nix 64 bit server. If anybody has suggestions for things to do in the meantime, opinions on which way to go, or other things that I have overlooked I would appreciate the help. Thanks

  Read the article

• Exim, hot to route local mail to other adress

  - by kheraud

  I have setuped an Exim4 server on my debian wheezy server. This mail server only sends mail coming from localhost. The purpose is sending mail for my website. I have cron tasks and other services generating mails for root user. These mails are not stored in /var/mail as before, but sent by exim to [email protected]. I try to make exim send mails for root to [email protected] rather than [email protected]. I tried adding a .forward in /root with [email protected] as content. I tried also changing /etc/aliases with root: [email protected]. The fact is that routing works for root@localhost but not for root which is resolved as [email protected] I tested how routing is resolved with exim -bt : root@srv02:~# exim -bt root@localhost R: system_aliases for root@localhost R: dnslookup for [email protected] [email protected] <-- root@localhost router = dnslookup, transport = remote_smtp host gmail-smtp-in.l.google.com [173.194.67.27] MX=5 host alt1.gmail-smtp-in.l.google.com [74.125.143.27] MX=10 host alt2.gmail-smtp-in.l.google.com [74.125.25.27] MX=20 host alt3.gmail-smtp-in.l.google.com [173.194.64.27] MX=30 host alt4.gmail-smtp-in.l.google.com [74.125.142.27] MX=40 root@srv02:~# exim -bt root R: dnslookup for [email protected] [email protected] router = dnslookup, transport = remote_smtp host aspmx.l.google.com [173.194.78.27] MX=1 host alt1.aspmx.l.google.com [74.125.143.27] MX=5 host alt2.aspmx.l.google.com [74.125.25.27] MX=5 host alt4.aspmx.l.google.com [74.125.142.27] MX=10 host alt3.aspmx.l.google.com [173.194.64.27] MX=10 I bet this is a matter of how my server is configured (rather than how exim is configured). But to understand well I would like to have a solution for both : how to have root resolved as root@localhost ? how to have [email protected] routed to [email protected] ?

  Read the article

• apache chokes after 300 connections

  - by john titus

  We have an apache webserver in front of Tomcat hosted on EC2, instance type is extra large with 34GB memory. Our application deals with lot of external webservices and we have a very lousy external webservice which takes almost 300 seconds to respond to requests during peak hours. During peak hours the server chokes at just about 300 httpd processes. ps -ef | grep httpd | wc -l =300 I have googled and found numerous suggestions but nothing seems to work.. following are some configuration i have done which are directly taken from online resources. I have increased the limits of max connection and max clients in both apache and tomcat. here are the configuration details: //apache <IfModule prefork.c> StartServers 100 MinSpareServers 10 MaxSpareServers 10 ServerLimit 50000 MaxClients 50000 MaxRequestsPerChild 2000 </IfModule> //tomcat <Connector port="8080" protocol="org.apache.coyote.http11.Http11NioProtocol" connectionTimeout="600000" redirectPort="8443" enableLookups="false" maxThreads="1500" compressableMimeType="text/html,text/xml,text/plain,text/css,application/x-javascript,text/vnd.wap.wml,text/vnd.wap.wmlscript,application/xhtml+xml,application/xml-dtd,application/xslt+xml" compression="on"/> //Sysctl.conf net.ipv4.tcp_tw_reuse=1 net.ipv4.tcp_tw_recycle=1 fs.file-max = 5049800 vm.min_free_kbytes = 204800 vm.page-cluster = 20 vm.swappiness = 90 net.ipv4.tcp_rfc1337=1 net.ipv4.tcp_max_orphans = 65536 net.ipv4.ip_local_port_range = 5000 65000 net.core.somaxconn = 1024 I have been trying numerous suggestions but in vain.. how to fix this? I'm sure m2xlarge server should serve more requests than 300, probably i might be going wrong with my configuration.. The server chokes only during peak hours and when there are 300 concurrent requests waiting for the [300 second delayed] webservice to respond. Please help..

  Read the article

• php-cgi.exe Taking out server, multiple running

  - by Alex

  I have been using ZendServer CE for over a year and have never had a problem. Recently, about a week or two ago I have found my server to be acting up and even causing RDP to be un-connectable. After some looking around I have 20, 25, 30+ php-cgi.exe running. With my IIS7 service starting with Windows once my server started all these php-cgi.exe would start running (even though the limit is 10) and I could not even connect to it. After disabling the Web Server as startup which stops php-cgi.exe from running the server runs flawless, like it always has. As soon as I run the web server all these odd issues start. I have a post over at Zend http://forums.zend.com/viewtopic.php?f=44&t=41043&p=95133 where I was told to update my Zend install. After doing so this issue has not gone away. Even running 1 php-cgi.exe (somehow 2 start anyway) the server begins to go silly. The first issue I find myself with running php-cgi.exe is that Windows Services, weather be stock or using FireDaemon begin to lag, slow start, crash, etc. If anyone can help me with this I would GREATLY appreciate it. At this time I am forced to look for a alternative to running PHP other than cgi as it simply takes out the whole box. On another note, I run this same version of Zend on a similar server with no issues. Starting to think its a IIS issue. (UPDATE) Installed newest version of PHP, separate from Zend, same issue. Server Specs: Intel Xeon Quad w HT Nehlam Based 24GB DDR3 1333 2x1TB Raid Mirror OS 2x1TB Raid Mirror (Other) 4x2TB Raid 5 (Storage) Server 2008 R2

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

  Read the article

• mysql - moving to a lower performance server, how small can I go?

  - by pedalpete

  I've been running a site for a few years now which really isn't growing in traffic, and I want to save some money on hosting, but keep it going for the loyal users of the site and api. The database has one a nearly 4 million row table, and on a 4gb dual xeon 5320 server. When I check server stats on this server with ps -aux, i get returns of mysql running at about 11% capacity, so no serious load. The main query against mysql runs in about 0.45 seconds. I popped over to linode.com to see what kind of performance I could get out of one of their tiny boxes, and their 360mb ram XEN vps returns the same query in 20 seconds. Clearly not good enough. I've looked at the mysql variables, and they are both very similar (I've included the show variables output below, if anybody is interested). Is there a good way to decide on what size server is needed based on what I'm coming from? Is it RAM that is likely making the difference with the large table size? Is there a way for me to figure out how much ram would be ideal?? Here's the output of the show variables (though I'm not sure it is important). +---------------------------------+------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/ | | bdb_cache_size | 8384512 | | bdb_home | /var/lib/mysql/ | | bdb_log_buffer_size | 262144 | | bdb_logdir | | | bdb_max_lock | 10000 | | bdb_shared_data | OFF | | bdb_tmpdir | /tmp/ | | binlog_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_filesystem | binary | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 10 | | datadir | /var/lib/mysql/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | keep_files_on_create | OFF | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | ft_boolean_syntax | + - For some reason, that table formats properly in the preview, but apparently not when viewing the question. Hopefully it isn't needed anyway.

  Read the article

• Nginx , Apache , Mysql , Memcache with server 4G ram. How optimize to enought memory?

  - by TomSawyer

  i have 1 dedicated server with Nginx proxy for Apache. Memcache, mysql, 4G Ram. These day, my visitor on my site wasn't increased, but my server get overload always in some specified time. (9AM - 15PM) Ram in use is increased second by second to full. that's moment, my server will get overload. i have to kill all apache , mysql service and reboot it to get free memory. that's the circle. here is my ram in use at the moment 160(nginx) 220(apache) 512(memcache) 924(mysql) here's process number 4(nginx) 14(apache) 5(memcache) 20(mysql) and here's my my.cnf config. someone can help me to optimize it? [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql skip-locking skip-networking skip-name-resolve # enable log-slow-queries log-slow-queries = /var/log/mysql-slow-queries.log long_query_time=3 max_connections=200 wait_timeout=64 connect_timeout = 10 interactive_timeout = 25 thread_stack = 512K max_allowed_packet=16M table_cache=1500 read_buffer_size=4M join_buffer_size=4M sort_buffer_size=4M read_rnd_buffer_size = 4M max_heap_table_size=256M tmp_table_size=256M thread_cache=256 query_cache_type=1 query_cache_limit=4M query_cache_size=16M thread_concurrency=8 myisam_sort_buffer_size=128M # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 [mysqldump] quick max_allowed_packet=16M [mysql] no-auto-rehash [isamchk] key_buffer=256M sort_buffer=256M read_buffer=64M write_buffer=64M [myisamchk] key_buffer=256M sort_buffer=256M read_buffer=64M write_buffer=64M [mysqlhotcopy] interactive-timeout [mysql.server] user=mysql basedir=/var/lib [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid

  Read the article

• Good Hosting Providers With Zend Framework Support [closed]

  - by manyxcxi

  I currently use ixwebhosting for my hosting services. They're cheap and work (most of the time). The databases are horribly slow, the servers are horribly slow, and their support (though usually prompt) is tough to deal with. That being said, they're cheap, I've got like 20 domains hosted in my account, none of them are high volume, and they work JUST good enough- until today. This isn't meant to be a condemnation of ixwh though. Their prices are very low for what they do offer and most things work just fine, most of the time. I need to be able to host web apps written with Zend Framework in a fairly easy fashion. The server performance can't be worse than what I've already had (a pretty low hurdle to clear), and I don't want to spend $30/mo. These are not money making websites- they're projects. My requirements are PHP 5.3, ZF support, MySQL databases, multiple domains- not much. Who should I look at, and who should I look out for?

  Read the article

• How can see what processes makes my server slow?

  - by Steven

  All my websites on my server are extremely slow or not loading at all. Even server admin (Plesk) will not load some times. There's been no changes to the sites for the last coupple of months. How can I see what processes is making my server slow? My environment looks like this: Server: VPS running Linux 2.8.x OS: Centos 5 Manage interface: Plesk 9.x Memmory: 1024MB CPU: 2.2GHz My websites run on PHP and MySQL. I finally managed to telnet (Putty + SSH) in to my server. Running top did not show any processes using more than max 2% CPU and none were using exesive memmory. I also got a friend to install a program that checks the core files, and all seemed fine. So I'm leaning towards network issues or some other server malfunction. But I'm not able to find out what can be wrong. Here are some answers to Sean Kimball: I don't run mail services on my server yet There are noe specific bandwidth peaks. Prefork looks like this <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> Not sure what you mean with DNS question. But I think it's up and running. There are no processes running wild Where can I find avarage load? Telnet is disabled and I have to log in using SSH :)

  Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >