Search Results

Search found 1160 results on 47 pages for 'bluetooth pan'.

Page 31/47 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Help identifying device and driver for 0bda:1724

  - by user104547

  I've got a new Lenovo Ideapad Yoga 13. The onboard lan/bluetooth device is identified in Linux as 0bda:1724 (via lsusb). No network peripherals are reported from lspci. From the interwebs, the vendor:product above looks to be RT2573, however, in Windows, the device is identified as RTL8723A. Unfortunately, I have followed both roads, trying rt2500usb, rt2x00usb, and rtl8723e. I have emailed Realtek asking them for help but so far my email has fallen on deaf ears. I've posted the output of lspci -nn -v and lsusb -v to: http://pastebin.com/dqvTSVjF Any help at all would be appreciated. Thank you, Ryan

  Read the article

• Wifi not working for Ubuntu 14.04

  - by user286975

  I have installed the Ubuntu 14.04 on Dell Vostro 2520 laptop. Wifi is not working after installation. Tried several methods to install but nothing happens. Vostro-2520:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no Vostro-2520:~$ iwconfig usb0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. The hardware is Broadcom 802.11 bcm43142. Please help to solve this issue.

  Read the article

• Not able to change brightness on a Compaq Presario CQ61

  - by jinu

  Here is my result of lsmod Module Size Used by joydev 17393 0 vesafb 13516 1 snd_hda_codec_hdmi 31775 1 snd_hda_codec_idt 60251 1 snd_hda_intel 32765 3 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec nvidia 10958194 42 snd_seq_midi 13132 0 arc4 12473 2 snd_rawmidi 25424 1 snd_seq_midi ath9k 117425 0 snd_seq_midi_event 14475 1 snd_seq_midi mac80211 436455 1 ath9k bnep 17830 2 snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event uvcvideo 67203 0 rfcomm 38139 0 parport_pc 32114 0 ath9k_common 13781 1 ath9k snd_timer 28931 2 snd_pcm,snd_seq psmouse 87213 0 videodev 86588 1 uvcvideo snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq bluetooth 158438 8 bnep,rfcomm ppdev 12849 0 serio_raw 13027 0 ath9k_hw 391523 2 ath9k,ath9k_common ath 19387 3 ath9k,ath9k_common,ath9k_hw mac_hid 13077 0 binfmt_misc 17292 1 cfg80211 178679 3 ath9k,mac80211,ath snd 62064 16 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp r8169 56321 0 usbhid 41906 0 hid 77367 1 usbhid

  Read the article

• rc.local is not always executed upon boot

  - by starcorn

  Hey, I have some weird problem with the rc.local file which is located in /etc/rc.local the thing is that it is not always running when I boot up the laptop. Maybe every second time, I haven't counted. Anyway when that happens I have to manually go to terminal and type sudo /etc/init.d/rc.local start, which kinda kills the purpose of having this script. Anyone know what the problem could be? EDIT Since this wasn't obvious. This is an issue where I make a fresh boot up. Which mean I have shut down the computer. And next time when I boot up the computer, the rc.local file is randomly deciding whether it will automatically start or not. Here's a copy of what my rc.local file contains echo -n 255 > /sys/devices/platform/i8042/serio1/serio2/sensitivity echo level 2 > /proc/acpi/ibm/fan touch /home/starcorn/Desktop/foo rfkill block bluetooth exit 0

  Read the article

• Set default pulseaudio volume

  - by MrUser

  When I reboot, the volume on the PulseAudio sinks is set to 100%. I know how to change the volume using pactl set-sink-volume, but that is only set temporarily. I could write a script that is run at startup, but it will not be applied if I connect a sink later. (i.e. a Bluetooth speaker) Is there a config file where I can set the default volume that is given to a device when it is first loaded by PulseAudio? Or even the master volume at startup? Clarification: The application is for a headless linux box, so the system shouldn't have to be rebooted and should be able to accept new devices without having to connect via ssh to adjust volumes, etc.

  Read the article

• Unable to fix broken packages with sudo apt-get install -f

  - by Bob

  Here's my result, of sudo apt-get install -f. i have Ran it twice and got negative result. I believe there is an error at "error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English" This same statement "error in Version string, caused me three days of attempting to download version 12.04. There is a bug report concerning the quoted text as well. Is there anyway to download the version without the language packs, why would I corrupt version 11.10? Also, when attempting to download Synaptic using sudo apt-get install synaptic, I get the same error message. Again I point out the initial download problems and the same error message receipt. Thanks b0b@b0b-IC780M-A:~$ sudo apt-get install -f [sudo] password for b0b: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get upgrade install Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: linux-headers-generic software-center The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner appmenu-qt apport apport-gtk apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common checkbox checkbox-gtk command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc deja-dup desktop-file-utils dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hpijs hplip hplip-cups hplip-data indicator-datetime indicator-session indicator-sound isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libarchive1 libasound2-plugins libatk-adaptor libbind9-60 libbrasero-media3-1 libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libgconf2-4 libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgoa-1.0-0 libgrip0 libgs9 libgs9-common libgtk-3-bin libgtksourceview-3.0-0 libgtksourceview-3.0-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-zeroconf1.0-cil libnautilus-extension1 libnm-glib-vpn1 libnm-glib4 libnm-util2 libnotify0.4-cil libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libreoffice-emailmerge libreoffice-style-human libsane-hpaio libsmbclient libsnmp-base libsnmp15 libsyncdaemon-1.0-1 libt1-5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libunity-2d-private0 libunity-core-4.0-4 libunity6 libusbmuxd1 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxml2 linux-generic linux-image-generic metacity metacity-common mobile-broadband-provider-info modemmanager mousetweaks multiarch-support nautilus nautilus-data nautilus-sendto-empathy network-manager nux-tools onboard openssl pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-cups python-cupshelpers python-gobject-cairo python-httplib2 python-launchpadlib python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support tomboy totem totem-common totem-mozilla totem-plugins ttf-opensymbol ubuntu-desktop ubuntu-minimal ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch unity unity-2d unity-2d-launcher unity-2d-panel unity-2d-places unity-2d-spread unity-common unity-lens-applications unity-services update-manager update-manager-core update-notifier update-notifier-common usbmuxd vim-common vim-tiny vinagre vino xorg xserver-xorg xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xul-ext-ubufox 296 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 0 B/159 MB of archives. After this operation, 10.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y Extracting templates from packages: 100% Preconfiguring packages ... dpkg: error: parsing file '/var/lib/dpkg/available' near line 4131 package 'python-zope.interface': error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English . language-pack-en-base provides the bulk of translation data and is updated only seldom. This package provides frequent translation updates.': version string has embedded spaces E: Sub-process /usr/bin/dpkg returned an error code (2) b0b@b0b-IC780M-A:~$

  Read the article

• Multi Seat Ubuntu 10.10

  - by JJ Mcfly

  Hi I was hoping to have a 2 seat setup. One will be for my TV just going to run Boxee. The other is for my main Desktop. I've been looking for a good guide to help me navigate this, I'd like to use ubuntu 10.10. I am assuming it's just a case of getting a box + 2 graphics adaptors and 2 usb mice and keyboards, one of which will be bluetooth for the TV. I can't seem to find much documentation on this idea. Can anyone point me in the right direction? Also I am assuming that this is all possible with a standard ubuntu install, but with some additional configuration. Thank you in advance for any advice you can offer me JJ Mcfly

  Read the article

• Dell Vostro 2420 upgrade to 12.04.1 no wifi

  - by Kane

  I have installed 12.04 on a dell vostro 2420 (previously 11.10) and wifi is gone now but wired network remains. I've reviewed the other questions and tried some stuff but no luck yet. The following is the process so far so hopefully someone can help: After installing 12.04 using the additional drivers utility did not bring up any proprietary drivers and using synaptic on installation then reinstallation of bcmwl-kernel-source and b43-fwcutter does not help bring up any drivers either (tried rebooting after as well) I have made sure in the bios that the wlan is turned on, and it appears the laptop does not have a wireless hardware switch, only the keyboard function shortcut which turns bluetooth on and off on the taskbar but there is no lightup of the wireless function on the laptop itself. Dell does not appear to have any drivers for ubuntu and google does not appear to be much help :( Thanks in advance!

  Read the article

• How do I set up multi seat?

  - by JJ Mcfly

  Hi I was hoping to have a 2 seat setup. One will be for my TV just going to run Boxee. The other is for my main Desktop. I've been looking for a good guide to help me navigate this, I'd like to use ubuntu 10.10. I am assuming it's just a case of getting a box + 2 graphics adaptors and 2 usb mice and keyboards, one of which will be bluetooth for the TV. I can't seem to find much documentation on this idea. Can anyone point me in the right direction? Also I am assuming that this is all possible with a standard ubuntu install, but with some additional configuration. Thank you in advance for any advice you can offer me JJ Mcfly

  Read the article

• Intel Centrino Wireless-N 1000 Again ! Ubuntu 13.04 x64

  - by vafa

  First I have to say that I tried everything written about this concept. The problem is that it stops working randomly in 3 main forms : 1 - sometimes it disconnect from wireless network and reconnect automatically 2 - sometimes it disconnect and wont connect no matter what (needs reboot) 3 - some times it's still connected but cannot ping or surf or whatever. I already tried disabling N mod using these commands : sudo modprobe -r iwlwifi modprobe iwlwifi 11n_disable=1 (or 0, whatever) it didn't help . these are the results of lspci, sudo lshw -C network, ifconfig, iwconfig, rfkill list when it disconnected and didn't connect till reboot : ifconfig : eth0 Link encap:Ethernet HWaddr c8:0a:a9:34:65:77 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1563213476557380 errors:9379306629148050 dropped:3126435543049350 overruns:1563217771524675 frame:7816088857623375 TX packets:1563217771524675 errors:6252871086098700 dropped:0 overruns:1563217771524675 carrier:3126435543049350 collisions:7816088857623375 txqueuelen:1000 RX bytes:1563217771524675 (1.5 PB) TX bytes:1563217771524675 (1.5 PB) ham0 Link encap:Ethernet HWaddr 7a:79:19:a5:e4:93 inet addr:25.165.228.147 Bcast:25.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:19ff:fea5:e493/64 Scope:Link inet6 addr: 2620:9b::19a5:e493/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:7743 errors:0 dropped:0 overruns:0 frame:0 TX packets:1250 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:665642 (665.6 KB) TX bytes:204056 (204.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:41138 errors:0 dropped:0 overruns:0 frame:0 TX packets:41138 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6420962 (6.4 MB) TX bytes:6420962 (6.4 MB) wlan0 Link encap:Ethernet HWaddr 00:1e:64:45:fb:70 inet6 addr: fe80::21e:64ff:fe45:fb70/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:286999 errors:0 dropped:0 overruns:0 frame:0 TX packets:226966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:324386887 (324.3 MB) TX bytes:30674804 (30.6 MB) iwconfig : ham0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off sudo lshw -C network: *-network description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:45:fb:70 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-30-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:46 memory:c0400000-c0401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: c0 serial: c8:0a:a9:34:65:77 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:47 memory:c0900000-c093ffff ioport:5000(size=128) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:19:a5:e4:93 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full ip=25.165.228.147 link=yes multicast=yes port=twisted pair speed=10Mbit/s lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 105M] (rev a1) 07:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 09:00.0 Ethernet controller: Qualcomm Atheros AR8131 Gigabit Ethernet (rev c0) rfkill list : 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 9: phy0: Wireless LAN Soft blocked: no Hard blocked: no any help will be REALLLYYYY appreciated

  Read the article

• Wireless not working with an Atheros AR9285

  - by Neeraj

  I recently installed Ubuntu 12.04 and found my wireless card is not detected by OS. I tired to detect it by network manager but still it is not get output of the required command: toor@Linux:~$ sudo lshw -class network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:9e:22:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=124.123.227.84 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:f2400000-f243ffff ioport:2000(size=128) *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f2500000-f250ffff and toor@Linux:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no Please let me know what more info is required to resolve it.

  Read the article

• Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

  - by Andy

  I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

  Read the article

• Boot problem with Ubuntu 11.10

  - by leonard

  So, I am an Ubuntu newbie, and I don't know a thing about it. I tried to install restricted extras (am I using it right?) through terminal, but it seems I failed :) maybe because during installation the internet connection crashed... anyway, I restarted and I got the Ubuntu intro screen at the boot, and then a black screen appeared with this information: checking battery state I restarted and it showed something else, so I rebooted for 5 times. Then a screen appeared *starting bluetooth *pulseaudio configured for per-user sessions saned disabled; edit /etc/default/saned I tried this: My fresh installation doesn't load. (PulseAudio problem) but didn't know how to save so I just skipped to update-grub, anyway nothing helped. What do I do?

  Read the article

• Dropbox indicator icon dissapears right after login

  - by garvamel

  Even though Dropbox's app indicator dissapearing from the tray area seems like a recurrent enough problem, my issue is a litte different. When I login, I can see the app panel populating, and the dropbox icon does indeed appear (config'd as startup application), but after some other icons show up (bluetooth, battery, etc.) it's gone. It's still running though. I'm guessing it's having issues with staying pinned, and I don't know how to start addressing this problem. I have tried many if not all solutions provided here in the forums for the "icon missing" questions. So far: I've whitelisted everything regarding panel Uninstalled-reinstalled (with and without rebooting in between) Overwritten current installation Purged installation from terminal Installed from Software Center and from .deb file batch deleted every "dropbox" ocurrences from terminal (files and folders) and reinstalled Ran sudo apt-get install libappindicator1, it installed, but didn't solve anything I'm on Ubuntu 12.04 LTS - 64 bits. Any insight would me much appreciated!

  Read the article

• Wifi networks will not show up!

  - by Kcahmadi

  I'm running Ubuntu 14.04 on an old '08 macbook. I've gone to system settingsSoftware & UpdatesAdditional Drivers and enabled the wireless driver. But when I click the wifi icon on the top toolbar no networks show up. When running lshw it clearly shows my wireless card under Network controller and it says the driver is installed. However, nm-tool only shows ethernet. And rfkill only shows bluetooth. What can I do?

  Read the article

• Management Software in Java for Networked Bus Systems

  - by Geertjan

  Telemotive AG develops complex networked bus systems such as Ethernet, MOST, CAN, FlexRay, LIN and Bluetooth as well as in-house product developments in infotainment, entertainment, and telematics related to driver assistance, connectivity, diagnosis, and e-mobility. Devices such as those developed by Telemotive typically come with management software, so that the device can be configured. (Just like an internet router comes with management software too.) The blue AdmiraL is a development and analysis device for the APIX (Automotive Pixel Link) technology. Here is its management tool: The blue PiraT is an optimised multi-data logger, developed by Telemotive specifically for the automotive industry. With the blue PiraT the communication of bus systems and control units are monitored and relevant data can be recorded very precisely. And here is how the tool is managed: Both applications are created in Java and, as clearly indicated in many ways in the screenshots above, are based on the NetBeans Platform. More details can be found on the Telemotive site.

  Read the article

• How do I get the Touchpad Settings working on a Dell XPS 13" Ultrabook?

  - by Dennis Wisnia

  Today I got an brand new Dell XPS 13 and I really like it. Wifi/Bluetooth/Brightness works very well. But only the Touchpad makes me insane. Okay, Multitouch is really nice and i love it on my Macbook but... i must click to click. How can I set up that is an "touch" to click? Its makes me insane. click, click, click.. Can I configure it? Update: I checked the proc/devices and got: I: Bus=0011 Vendor=0002 Product=0005 Version=0000 N: Name="ImPS/2 Generic Wheel Mouse" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input11 U: Uniq= H: Handlers=mouse0 event11 B: PROP=0 B: EV=7 B: KEY=70000 0 0 0 0 B: REL=103 Its really bad - and anyone have an Idea that Ubuntu thinks that is an Touchpad??

  Read the article

• Background & Research Methods section (Writing an Article)

  - by sterz

  It is my first time writing an article on a software project. I am supposed to use ACM UbiComp paper format. I already have a structure that I should follow and there is a Background & Research Methods section after Abstract, Introduction, Related Work sections. I have browser through several articles, but some of them either dont have it, have only background section or have only research methods section. I am having hard time to find an article that has this section and moreover what I must write on here. My project is about Bluetooth location tracking and I do have the implementation and evaluation, so it is not something theoretical.

  Read the article

• Dropbox icon dissapears right after login

  - by garvamel

  Even though Dropbox's app indicator dissapearing from the tray area seems like a recurrent enough problem, my issue is a litte different. When I login, I can see the app panel populating, and the dropbox icon does indeed appear (config'd as startup application), but after some other icons show up (bluetooth, battery, etc.) it's gone. It's still running though. I'm guessing it's having issues with staying pinned, and I don't know how to start addressing this problem. I have tried many if not all solutions provided here in the forums for the "icon missing" questions. So far: I've whitelisted everything regarding panel Uninstalled-reinstalled (with and without rebooting in between) Overwritten current installation Purged installation from terminal Installed from Software Center and from .deb file batch deleted every "dropbox" ocurrences from terminal (files and folders) and reinstalled Ran sudo apt-get install libappindicator1, it installed, but didn't solve anything I'm on Ubuntu 12.04 LTS - 64 bits. Any insight would me much appreciated!

  Read the article

• restarted my computer and my wireless icon was missing and my sound no longer works

  - by Justin Otto

  I recently updated to 12.04 on my sony vaio VGN-N110G. I've had ubuntu on this laptop since 10.04 and haven't had any real problems. so i restarted my computer today and none of the unity desktop background showed up only the desktop with the files on it so i brought up the terminal and entered in unity -replace and restarted it and it came back up fine except that i noticed that my panel only had mail, volume, date/time, and power icons no wireless or bluetooth, i tried a couple of approaches to try and get it working again i tried nm-applet --sm-disable and it brought up a warning message, i'm not very skilled in code even though i've had ubuntu for four years but in the past versions it wasn't too big a problem

  Read the article

• Macbook Pro late 2011 screen brightness issue

  - by buchzumlesen

  The keys to set the screen brightness work properly but everytime I reboot, the screen brightness is reverted to 100%, which is very annoying. I've already tried to add the following lines to /etc/rc.local but with no success (only the keyboard backlight stays off): #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo '1' > /sys/devices/platform/applesmc.768/leds/smc::kbd_backlight/brightness echo '6' > /sys/class/backlight/acpi_video0/brightness rfkill block bluetooth exit 0` This worked for me when I was using Ubuntu 12.04 and also did after the upgrade to 12.10 but then after rebooting the screen brightness always reverted to 100%. Would be nice if anyone knows how to fix this. My device: Macbook Pro 13" Late 2011 Thanks in advance!

  Read the article

• How do I get to the maintenace shell?

  - by Narida

  I'm asking this because initially, my problem was this (power failure during installation, so I typed the following instructions in the maintenance shell: sudo mount -o remount,rw / sudo dpkg --configure a sudo mount -o remount,ro / sudo sync sudo reboot The first three lines worked, afterwards, my computer (a Dell Inspiron 530) got stalled for several hours, so I unplugged it. When I turned it on, the log in screen appeared, and after I try to write my password, it leads me back to the log screen. I must note that when I typed the first three lines during the maintenance shell mode, it said that the errors which were encountered during processing were: initscripts bluez gnome-bluetooth So, what do I have to do in order to get back to the maintenance shell so I can type code again? And, what code do I have to write in order to restore my computer? Thank you for your attention.

  Read the article

• Is the Lenovo Ideapad Z570 fully compatible with 12.04?

  - by umpirsky

  I'm looking for some notebook that will run on Ubuntu perfectly. I like LENOVO IdeaPad Z570, but I'm not sure how it will perform on Ubuntu. I heard people are complaining about wireless problems. Here is full configuraion: Processor Intel Core i5 2430M 2.4GHz - 3.0GHz Chipset Intel HM65 Express Memory 4GB DDR3 1333MHz Graphics NVIDIA GeForce GT 520M 1GB HDD 750GB SATA II Wireless 802.11b/g/n, Bluetooth 2.1 Network adapter Ethernet LAN 10/100Mbps Ports VGA, HDMI, 3x USB 2.0, eSATA Does anyone have experience with this model? Any problems noted? I heard there is a test suite, how can I install it? Maybe I can boot live CD and try it myself before buying it. But, unfortunately, sometimes something works on live CD, but not when you install it. I guess critical components here are graphics and wireless. Any feedback would be appreciated.

  Read the article

• How to reset wireless card settings

  - by Nissan911

  Yesterday i was playing around of the wireless settings, and set up a tftp server. Today, i found the wireless icon does not show up on the panel anymore.. monitor and bluetooth are still there... I did: ifconfig -a, and it shows: etho0 link encap:ethernet, and it has: HWaddress inet6 addresss. RXbytes 0 TX bytes: 0, but it does not even have a ip4 address, nor a mask. The other one is: l0 link encap: local loopback inet addr 127.0.0.1. mask 2550 0 0 Can anyone help me how to reset the settings for my wireless connection? Thanks

  Read the article

• networkprinting with cups in ubuntu 13.10

  - by gero

  I upgraded from Ubuntu 13.04 to Ubuntu 13.10. The printer configurations were transferred correctly. I have an USB laser printer, which still works if I connect my laptop directly. Usually I used this printer by wlan or bluetooth, where an old laptop works as server (cups 1.3.X). If I now want to print some pdf or postscript file, one or the other way I only obtain a header printed, not the content of the file. Curiously the Ubuntu 13.10 test page is printed correctly.

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >