Search Results

Search found 2589 results on 104 pages for 'dell powerconnect'.

Page 31/104 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Brand New MOnitor Won't Get Input From CPU

    - by HollerTrain
    I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

    Read the article

  • Secondary Monitor won't Display at Full Resolution with Primary Display Disconnected

    - by Laramie
    I have had a bad day. Among today's events, the LCD display on my Dell E6500 notebook failed. It had been working with a secondary monitor connected through a VGA cable at 1600x900 resolution until I removed the LCD from my notebook for repair. Now the max resolution available on the secondary display is 1024x768. If I reconnect the burned out primary display, the secondary monitor is again available at 1600x900. The video card is an onboard Mobil Intel 4. How can I maintain the secondary display at 1600x900 with the primary display disconnected (for repair)? Edit: I just noticed that when Windows boots, it displays at the correct resolution and I can see my desktop in all its glory for a couple seconds then reverts to 1024x768.

    Read the article

  • SATA drive not recognized when installing RHEL 5.1 on PowerEdge R410

    - by Rachel
    Here's my setup: Dell R410 with Perc S100 (software) raid controller on an Intel ICH10R chipset The first problem is that the Perc S100 is only supported on windows. I'm trying to install RHEL 5.1. It boots from the cdrom, but later the installer can't see the cdrom or hard drive. Both are connected to the on-board sata controller. The only options in the R410 bios for SATA are ATA or RAID. I don't need raid, I just want a single drive setup.

    Read the article

  • Looking for a laptop with a removable hard drive

    - by anno
    At the moment, I possess a Dell Inspiron 6400. Just removing two screws, I've made the drive removable (look here) and I can pull it off in one second. The new Inspiron and Studio laptops don't support this anymore (the drive is no more on the side but on the back of the laptop). So I’m looking for a new laptop having this kind of feature, or one that can be modded easily. I also need a : Screen = 15" (if possible resolution 1366 x 768 resolution) Core i5-520M Midrange GPU (like an ATI Mobility Radeon HD 5650) Decent battery life minimum fan noise Thanks.

    Read the article

  • Ubuntu PowerEdge T110

    - by Josh
    I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

    Read the article

  • Intsalling Linux on PowerEdge R410 via USB

    - by Bill Johnson
    I’m hoping someone can help me with the following issue. I have a Dell PowerEdge R410 and basically the Optical Drive has failed when I have been given the server. I have installed 2 SATA drives and want to install Ubuntu 11.04; however, each time I have tried i.e. using bootable .iso on USB it failed. I assume it's failing as with a lot of releases they all look at the CD drive. Ubunutu has failed on installation with the error message unable to mount CD. I have tried installing Microsoft Hyper-v and that also fails as during installation it asks for CD/DVD drivers. Tried embedding ISO's from various distro's (Linux and Windows) with drivers and that hasn't worked out either. Does anyone have any idea on how I can get Ubuntu on this server? Should I look towards an old distro perhaps?

    Read the article

  • What cable to connect Inspiron 1720 to HDMI TV?

    - by Bernhard Hofmann
    Hi I'm a little confused to say the least when it comes to video formats and protocols. I'd like to view my laptop output on my HD TV. The TV has HDMI, S-Video, and RCA inputs. My laptop has a VGA female port on the side for driving a 2nd monitor, and an S-VHS output at the back. No, it has no DVI, which I've heard is a poor decision from DELL, and even poorer decision on my part to buy it. Can I get true HD output from this to my TV? What cable do I need, or would I need a converter? Any other suggestions are also welcome, such as how to get something close to HD on my TV. Thanks! Bernhard

    Read the article

  • PC will be turned off in safe mode

    - by abbasi
    I wanted to scan a Dell inspiron N5010 laptop in safe mode. When I took it to the safe mode environment and ran the AV to scan, after some while the PC went out! The power options menu options (when plug is in) are as follows: Screensaver after 4 mins. Dim to display after 10 mins. Turn off display after 15 mins. Hard disk, sleep and hibernate are all off (set to never). I tested the machine without scanning it, i.e, went to the safe mode and waited to see what occurs after time elapsing. By observations so far (because I can apply more tests to determine that where the problem exactly is), the problem is when the machine is in safe mode and is doing something (in current case, scanning). What do you think? Why it goes out in this situation please? Thanks in advance.

    Read the article

  • Computer wakes itself few seconds after hibernation

    - by Juan Zamudio
    Hi all, this is the situation, this is a Dell Optiplex 755, I recently upgraded it to Windows 7 64 bits, it had Windows XP SP3 previously, on XP I never had a problem hibernating the PC, now with Windows 7 64 every time I hibernate the PC it wakes it self after 5 or so seconds. Here are the steps I already tried: On Windows 7 I enabled the hibernation following this steps In the MoBo the sleep settings are on S3 In the Mobo I disable remote wake ups I have disabled the remote wake up in the NIC When I run the lastwake command I get unknown device or something like that I already disable the wake timers on Windows I have the latest drivers from Intel, but I just found out that in the device Manager I get a warning sign on the "Intel AMT SOL (COM3)" device saying that it failed and windows stopped the device, I reinstalled the Intel drivers but nothing changed. The only thing that I haven't touch is Intel ME in the MoBo but I don't if that could help and what settings are correct. Thanks for you help.

    Read the article

  • What causes Windows Boot to stall?

    - by Nick Berardi
    For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

    Read the article

  • Brand New Monitor Won't Get Input From Computer

    - by HollerTrain
    I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

    Read the article

  • Motherboard rejects identical hard drive, one works the other doesn't

    - by Payson Welch
    I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took two identical drives from a raid 0 enclosure that came from the factory (GDrive), one works on all four servers, the other does not. I verified that they both work by plugging them into a hard drive cradle. This behavior can be repeated with other drives, some drives work and some don't. However when i test them, they ALL work on my PC. What could cause this?

    Read the article

  • what can I do with an old but working PC [closed]

    - by fskreuz
    I have an old Dell optiplex GX240 on Pentium 4 1.8Ghz and 256MB Ram (or was it 512MB). It's still in working condition but it's getting slow for me and i wanted to optimize it. I just want that old box to be usable even for simple desktop use (email, surfing, chat). I also have to note that my parents prefer use it over a laptop for some reason. Treat it as a "box-type netbook". unlike the other threads that they all prefer sending away or use as file server, firewall and that, i am looking for suggestions on how to keep it usable as the main PC. any suggestions? OS perhaps?

    Read the article

  • Volume display for laptop missing after driver update

    - by Cyclone
    I have a Dell Inspiron 1520, and I just updated my audio drivers to be able to use Stereo Mix. It's a SigmaTel audio driver. Prior to the update, whenever I used the hardware buttons to update volume or mute/unmute speakers, it would always have a nice display like this one: But, for volume instead of screen brightness. The hardware buttons still work fortunately, but the volume display is gone. Is there a place I can configure this setting and re-enable it? The speaker icon in task tray was also disabled with the update, but I re-enabled that from the Control Panel. Is this simply gone with the driver update? Thanks for the help!

    Read the article

  • Ubuntu on an XPS 14 Ultrabook with mSATA cache and 500GB HD - how to partition for dual boot?

    - by JDS
    I am getting an XPS 14 ( http://www.dell.com/us/p/xps-14-l421x/pd ) and I want to dual-boot Windows and Ubuntu. This thing has a 500GB standard HD and a 32GB mSATA that can be used as cache. Does anyone know how this thing is partitioned? Is the OS installed on the mSATA drive and data is on the big HD? Is there a BIOS controller or maybe even a Windows driver that makes the mSATA drive and 500GB HD appear contiguous? I get the impression that something makes the mSATA be used invisibly as cache, but I can't find any technical documentation how that works. My primary concern here is wrt dual-booting Ubuntu. I want to know if I need to partition the mSATA separately, or the big HD, or just partition the "magic" contiguous disk space that appears available to the OS.

    Read the article

  • About Eucalyptus Virtualization Support

    - by rammayur
    I am having hp 540 notebook with processor core 2 duo. I have installed CLC,CC,SC and Walrus runs fine when I try to run NC, I get error "Not virtualization enabled" means my laptop does not support virtualization. I got it. Then, In my college, there is Dell desktop PC having processor Core 2 Duo. But it has virtualization enbled.So I get confused. How same thing has different effects. So my questions are Which thing is essential for Virtualization?? What should I upgrade in my Laptop Processor or buy a new one?

    Read the article

  • DRAC for remote OS install w/o Virtual Media

    - by The Diamond Z
    I have a few DELL servers in a remote DC and our ISP has been very kind about doing OS installs for us. However, as we move to Production and multiple DC's I'd like to be able to do the installs/re-installs internally and DRAC Enterprise w/SDRAM seems ideal. My question is, how do you get your install ISO's on to the SDRAM? Can I just copy it from a local DVD (temp USB hookup) or FTP? What's the advantage to the SDRAM over just buying a USB dongle (to leave plugged into the server) and installing a bootable install ISO? We're a virtual org generally using DSL (2mb) connections to the DC over the Internet and using 'Virtual Media' isn't viable for us.

    Read the article

  • How do I maximize a window in one monitor and do other things on the other monitor

    - by RoboShop
    Hi, I have windows 7 installed on my laptop which is a Dell studio XPS 16. I recently set up a second monitor for it. I've noticed that when I load up "full maximisation" applications (I don't know the term) like a game or media center on one monitor, I can't seem to do anything with the other monitor. With the game, I can see the other monitor, I can play a movie on it even, but if I click the mouse button on it, it'll stop the game and alt-tab away. In Media Center, I can't even cross my mouse over the other monitor. So my question is, in Windows 7, is it possible to run programs like this that are designed to be run in one maximised window and still be able to do things on the other window?

    Read the article

  • Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

    - by MarianoC
    Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

    Read the article

  • Battery won't charge and BSOD: DRIVER_POWER_STATE_FAILURE

    - by JamesGecko
    I have a Dell Vostro 1510 running Windows 7. Today when I pulled my machine out of it's bag and plugged it in, the little battery light on the side blinked constantly instead of staying solid, and Windows showed a message that the battery was not charging. The battery is 3.5 years old, but it can still hold the machine in standby overnight, so I don't know why it won't charge anymore. After I have had the machine on for a while (20 minutes the first time, 40 minutes the second time), it shows a blue screen of death with the message DRIVER_POWER_STATE_FAILURE and reboots. I can deal with the battery being dead, but not with blue screens of death. Does anyone know how to fix it? Edit: Potentially relevant, this started happening after an OS update was automatically installed on Friday and Windows started nagging to reboot. The first BSOD was before the reboot; the update made a lot of registry changes when the machine came up, and the second BSOD was 40 minutes later.

    Read the article

  • How do I configure hardware raid in a Poweredge 2850?

    - by Eric Fossum
    I just bought a Dell Poweredge 2850 from Craigslist and for the most part I'm happy with it's $300 price-tag, but I cannot figure out where to configure the embedded hardware raid... I've seen online you should hit <CTRL-M>, but while booting my box never says that. I have <CTRL-A> (I think) for an LSI Logic config, but that seems to just program SCSI and verify drives on my SCSI-A and SCSI-B. Anyone have a clue where this RAID config is?

    Read the article

  • Will adding extra RAM in my computer speed it up?

    - by Harry Simpson
    I have a 5 year old Dell Inspiron 530 desktop computer which is slowly grinding to a halt. Someone told me if i put extra RAM in itll speed it up. Inside the computer there are four slots for memory but only two has memory in them and they are 1GB each. if i bought another 2no. 1GB and put them in the free slots would it speed the computer up (would it be twice as fast?) and is it as simple as just putting them in or is there other things i need to do?

    Read the article

  • BSOD During Windows 7 Install

    - by matheeeny
    I current have a working XP partition a Dell XPS m1330 laptop along with a working Ubuntu partition. After launching the Windows 7 install DVD from within XP I run through the options for a custom install on a free NTFS partition. Everything seemingly works as it should and then my computer restarts. After choosing to boot into the newly created Windows partition I am given the Windows 7 splash screen only to be followed by the BSOD. Here are the stop codes from the BSOD: stop: 0x0000007b (0x80D86B58,0xc0000034,0x00000000,0x0000000) Googling this tells me that it indicates an 'inaccessable boot drive'. Is it possible that its having problems booting from this partition due to the other existing partitions? I'm thinking that there may be a windows recovery CD workaround this but I am not quite proficient in its capabilities. This is what happens when I try to install by booting from the DVD

    Read the article

  • Sound leaks from speaker even when headphones are inserted

    - by instantsetsuna
    I've a Dell Optiplex 960 (which I presume has a speaker inside the tower). This speaker is normally in use whenever I play music (lets call this "tower speaker"), and when I insert my headphones in the 3.5mm jack (of the tower), the tower speaker stops and the music is played through the headphones (an obvious thing to happen). But sometimes, the tower speaker starts playing the music even when the headphones are inserted! So, the music is played through both of them! This gets quite embarrassing. So, my question is - Is there a way to turn off this "tower speaker"? EDIT : I'm using Windows XP

    Read the article

  • XPS M1730 Freezing & Crashing unexpectedly

    - by evesirim
    I have a Dell XPS M1730, freshly installed with Windows 7 Professional 32-bit that every so often crashes completely unexpectedly. It need not be running any applications at all for this to happen, never mind anything particularly intensive. It also clearly is not a BSoD issue as no Minidump files are being created in the process. All drivers are up to date and have been both rolled back and then updated and the Device Manager reports no issues. There are very few applications installed on the machine and it has only been online once. It runs a minimal boot of Win7 and yet still after all of this something is making it crash. All of this suggests to me it may be more like a hardware problem but to be honest I really have no idea - so I thought I'd try here. Any thoughts...? Many thanks in advance

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >