Search Results

Search found 1902 results on 77 pages for 'expansion cards'.

Page 31/77 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • New drivers, now switchable graphics won't work

    - by Glenn Andersson
    I have an ASUS notebook with dual AMD/ATI graphic cards. Before I've been able to switch individual programs in the Vision Control Center from high performance to energy saving and the other way around. But today I updated the drivers using the AMD Mobility to version 12.10, and now every time I try to configure switchable graphics it either shuts down or does not come up at all. I have a new menu item called Global Switchable Graphics settings though. Any thoughts on this?

    Read the article

  • Dirty Cache Dell Equallogic Storage Array

    - by Jermal Smith
    has anyone ever run into a dirty cache issue with a Equallogic SAN. Even after replacement of the controller cards in the Equallogic Storage Array fails offline with a dirty cache. I have listed steps here on my blog to bring the SAN online again, however this is not the best solution as it continues to fail. http://jermsmit.com/dirty-cache-dell-equallogic-storage-array/ If you have any info on this please share. Thanks, Jermal

    Read the article

  • Cheapest dedicated PhysX card?

    - by davr
    Say I have a nice powerful ATI Radeon GPU but I would like to have PhysX support as well. What is the cheapest NVidia GPU I can buy to add on to my system that will support PhysX? (I already know about the driver hacks required to get both cards running at once)

    Read the article

  • Use MacBook Pro airport for injection with kismac

    - by Am1rr3zA
    Hi, I want use kismac to break my WEP wireless password with my MacBook Pro but when I go to step that want to inject packets it's doesn't do anything! I some where read that MacBook Pro wireless cards don't support injection! Is that right? How can I solve this? If I must buy USB Wireless Modem which one is better ?

    Read the article

  • I/O intensive MySql server on Amazon AWS

    - by rhossi
    We recently moved from a traditional Data Center to cloud computing on AWS. We are developing a product in partnership with another company, and we need to create a database server for the product we'll release. I have been using Amazon Web Services for the past 3 years, but this is the first time I received a spec with this very specific hardware configuration. I know there are trade-offs and that real hardware will always be faster than virtual machines, and knowing that fact forehand, what would you recommend? 1) Amazon EC2? 2) Amazon RDS? 3) Something else? 4) Forget it baby, stick to the real hardware Here is the hardware requirements This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 1 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 2 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. Thanks in advance. Best,

    Read the article

  • Are FC and SAS DAS devices standard enough?

    - by user222182
    Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

    Read the article

  • Mount "locked" SD card as read-write in GNU/Linux

    - by Vi
    My Canon PowerShot A470 + CHDK can write to SD-cards that are "locked" (the lock switch is used to make the card bootable), but GNU/Linux `/dev/mmcblk1': Read-only file system (I'm using "Texas Instrument 5-in-1 Multimedia Card Reader") So I have to switch that switch on and off again and again. ("unlocked" to write to the card in Linux, "locked" to boot the camera from it). How to force locked card to be writable in GNU/Linux?

    Read the article

  • Is possible to boot on PXE over a WiFi device?

    - by Diogo Rocha
    As I know it is possible to boot up some bootable images (like Linux, Clonezilla, management applications and others) over a PXE (Preboot Execution Environment) server with an Ethernet device (802.3). Can the same thing be done with an Ethernet WiFi (802.11) device? I tested with my notebook but my BIOS appears to not enable booting from WiFi devices. Is it possible with some specific WiFi cards and/or a specific BIOS?

    Read the article

  • Can't get decent refresh rate on crt connected to dvi

    - by Ernst
    Hi, I have a CRT connected to a dvi connector on a videocard using a vga cable and a dvi to vga adapter. Now I cannot set the refresh rate to anything decent (only 60Hz and lower). I've hat this happen using different CRT's, graphics cards (although all ATI, both agp and pcie), and operating systems (both linux and windows). Any idea on how to solve this, maybe some bios setting? Thanks

    Read the article

  • networking related problem

    - by abhay
    i have installed two LAN cards in my PC. one is used for local networking and other is for Wide area networking( both have a different gateways). But when i need to browse in WAN for that i have to disable my LAN and vice versa. so i don't know the technical / logical reason behind that. so could you please give me reason why this happens.

    Read the article

  • lacp, cicso 3550, 3560, help with configuration

    - by Flamewires
    Hey all this is a repost from a question I asked on the cisco forums but never got a useful reply. Hey I'm trying to convert the FreeBSD servers at work to dual-gig lagg links from regular gigabit links. Our production servers are on a 3560. I have a small test environment on a 3550. I have achieved fail-over, but am having troubles achieving the speed increase. All servers are running gig intel (em) cards. The configs for the servers are: BSDServer: #!/bin/sh #bring up both interfaces ifconfig em0 up media 1000baseTX mediaopt full-duplex ifconfig em1 up media 1000baseTX mediaopt full-duplex #create the lagg interface ifconfig lagg0 create #set lagg0's protocol to lacp, add both cards to the interface, #and assign it em1's ip/netmask ifconfig lagg0 laggproto lacp laggport em0 laggport em1 ***.***.***.*** netmask 255.255.255.0 The switches are configured as follows: #clear out old junk no int Po1 default int range GigabitEthernet 0/15 - 16 # config ports interface range GigabitEthernet 0/15 - 16 description lagg-test switchport duplex full speed 1000 switchport access vlan 192 spanning-tree portfast channel-group 1 mode active channel-protocol lacp **** switchport trunk encapsulation dot1q **** no shutdown exit interface Port-channel 1 description lagginterface switchport access vlan 192 exit port-channel load-balance src-mac end obviously change 1000's to 100's and GigabitEthernet to FastEthernet for the 3550's config, as that switch has 100Mbit speed ports. With this config on the 3550, I get failover and 92Mbits/sec speed on both links, simultaneously, connecting to 2 hosts.(tested with iperf) Success. However this is only with the "switchport trunk encapsulation dot1q" line. First, I do not understand why I need this, I thought it was only for connecting switches. Is there some other setting which this turns on that is actually responsible for the speed increase? Second, This config does not work on the 3560. I get failover, but not the speed increase. Speeds drop from gig/sec to 500Mbit/sec when I make 2 simultaneous connections to the server with or without the encapsulation line. I should mention that both switches are using source-mac load balancing. In my test I am using Iperf. I have the server(lagg box) setup as the server(iperf -s), and the client computers are client(iperf -c server-ip-address), so the source mac(and IP) are different for both connections. Any ideas/corrections/questions would be helpful, as the gig switches are what I actually need the lagg links on. Ask if you need more information.

    Read the article

  • I have a new seagate 3tb hard drive and when i installed it it says 349gb free

    - by Joseph Sexton
    my new seagate sata drive keeps showing as a 249gb drive but in the setup part when i press del at the boot up it states there a 3000gb drive and i have searched for a solution but havent found one yet. I havent tried in a different pc yet and I have an asus gaming board with 2 video cards sli'ed and i have windows 7 ultimate 64 bit with 8gb ram and a hp 23" widescreen monitor and the sniper gaming case and a salitek lighted up gaming keyboard and a razor death adder gaming mouse and a corsair 850 watt power supply. Any help would be great and appriciated

    Read the article

  • How well does Windows 7 MCE support Clear QAM?

    - by Jess Sightler
    How well does Windows 7 MCE support ClearQAM (no-cablecard, no HD), and are there any guidelines for which capture cards work best with it? Also, I have an old laptop with a 2 Ghz Pentium M with 1 GB of RAM. I believe that this will be able to handle 1 stream (as it currently does with non-QAM content under XP MCE. Would it also be able to handle 2 streams?

    Read the article

  • Ping from specific network adapter on Windows

    - by Dean
    Hey, I've been troubleshooting network issues on servers with 2 NICs and laptops with wired and wireless cards. How can I force the PING and TELNET to be sent from a specific adapter? I know it's a trouble with windows. Turning off one of the adapters is not an option, I am always connected through one of the adapters. There must be some command line option to prefer one adapter over the other. Thanks

    Read the article

  • 3 monitors, 2 X screens, Twinview not working as expected

    - by mononym
    Hi Guys, I have 3 monitors on 2 graphics cards (both nvidia) to get all 3 working i set 2 as twinview and one to have its own x screen. but when i do this, the twinview screens (which previously worked like 2 seperate screens) now work as one, ie a maximised window is across both screens How can i get the twinview to work as 2 seperate screens again?

    Read the article

  • Need advice on which PCI SATA Controller Card to Purchase

    - by Matt1776
    I have a major issue with the build of a machine I am trying to get up and running. My goal is to create a file server that will service the needs of my software development, personal media storage and streaming/media server needs, as well as provide a strong platform for backing up all this data in a routine, cron-job oriented German efficiency sort of way. The issue is a simple one - all my drives are SATA drives and my motherboard controller only contains 4 ports. Solving the issue has proven to be an unmitigated nightmare. I would like advice on the purchase of the following: 4 Port internal SATA / 2 Port external eSATA PCI SATA Controller Card that has the following features and/or advantages: It must function. If I plug it in and attach drives, I expect my system to still make it to the Operating System login screen. It must function on CentOS, and I mean it must function WELL and with MINIMAL hassle. If hassle is unavoidable, there shall be CLEAR CUT and EASY TO FOLLOW instructions on how to install drivers and other supporting software. I do not need nor want fakeRAID - I will be setting up any RAID configurations from within the operating system. Now, if I am able to find such a mythical device, I would be eternally grateful to whomever would be able to point me in the right direction, a direction which I assume will be paved with yellow bricks. I am prepared to pay a considerable sum of money (as SATA controller cards go) and so paying anywhere between 60 to 120 dollars will not be an issue whatsoever. Does such a magical device exist? The following link shows an "example" of the type of thing I am looking for, however, I have no way of verifying that once I plug this baby in that my system will still continue to function once I've attached the drives, or that once I've made it to the OS, I will be able to install whatever drivers or software programs I need to make it work with relative ease. It doesn't have to be dog-shit simple, but it cannot involve kernels or brain surgery. http://www.amazon.com/gp/product/B00552PLN4/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B003GSGMPU&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1HJG60XTZFJ48Z173HKY So does anyone have a suggestion regarding the subject I am asking about? PCI SATA Controller Cards? It would help if you've had experience with the component before - that is after all why I am asking here - for those who have had experience that I do not have. Bear in mind that this is for a home setup and that I do not have a company credit card. I have a budget with a 'relative' upper limit of about $150.00.

    Read the article

  • Windows 8.1 will not sleep after wake up

    - by per
    I have problem with sleep/screen saver on my new Windows 8.1 machine. It will go to to sleep or start screen saver after start (or restart). But if it goes to sleep (manually or automatically) and I wake it up, it wont start sleep or start screen saver again automatically. I updated chipset and graphic cards drivers. I don't have any homegroup. Does anyone have similar issue? Thanks for any advice, per

    Read the article

  • NVIDIA SLI - Screen blinking

    - by eks
    I have tried multiple drivers and multiple games ( Games tried, Darkfall and source based games). Drivers tried ( 18x,29x and 24x). When i disable SLI the games work perfectly. A description of the blinking effect would be its like one of the video cards are not sending the image to screen.

    Read the article

  • Is ThinkPad X61T SD card slot SDXC compatible?

    - by trismarck
    I have a Thinkpad X61T 7763 tablet and I was planning to buy a 64GB card for the SD card slot. The 64GB card supports the new SDXC standard and I'm not sure if the SD card driver / hardware can handle that. So far, I've successfully used 8GB cards in the slot, but they were SDHC ones. Thinkpad manuals don't give the answer. I wonder if anyone tried this configuration already and what was the outcome.

    Read the article

  • How to buy a computer that supports multiple monitors?

    - by Curtis Gibby
    When shopping for a new desktop computer, I'd like to get one that allows me to use two monitors. Is that something that most current-generation video cards can do (in late 2012), or do I need to search for a specific graphics card, or specific attributes for a card? I've Googled the question but most answers talk about how to figure out if a computer that you already have can support dual monitors (generally, by plugging two monitors and seeing if they both work). Is there some key terminology that I'm missing in my searches?

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >