Search Results

Search found 1902 results on 77 pages for 'expansion cards'.

Page 27/77 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Does the Lenovo t60p vga port support an s-video signal?

  - by Matthijs Wessels

  I just bought a new television. The problem is it turns out it doesn't have a VGA port. It does have: s-video, component, hdmi and scart. My Lenovo t60p only has vga. If have search frantically for a solution and even though it seems I have sooo many options they are all dead ends. Or I keep ending up having to buy a 100 euro box to convert the signal. However, I found that some video cards support s-video through the vga port. It says look it up in your video cards documentation. I have a Lenovo t60p laptop with a ATI MOBILITY FireGl v5250. But I can't seem to get my hands on any documentation where this is supposed to be documented. I found this website: http://forum.notebookreview.com/showthread.php?t=179529&highlight=s-video There this guy says he thinks it's in the t60 but dropped in the t61, but suggests to the guy with the t60 that it won't work. I can't really conclude anything from that. Furthermore, I am not looking for the best of the best quality. So when I found this: *http://www.amazon.com/VideoSecu-Computor-Presentation-Converter-VGA2TV/dp/B000X3FAJU/ref=pd_cp_e_3_img I woudl be quite happy with this. Except that I don't think I can order it because I don't live in the US. Can anybody give me a definite answer, to whether the vga port of my lenovo t60p ati firegl v5250 supports s-video? So that I can just by a vga to s-video cable to achieve my goal.

  Read the article

• APC Smart UPS network shutdown issue

  - by Rob Clarke

  Here is a bit about our setup: We have 2x Smart-UPS RT 6000 XL units with network management cards We are running Powerchute from a network server Powerchute is connected to the management cards of both UPSs UPSs are set to do a graceful shutdown via Powerchute when the battery duration is under 20 minutes We also have a command file that runs with Powerchute Although our setup is redundant we do not have an equal load on each server due to APC switches for single power devices The problem is that as we do not have an equal load on each server the batteries drain at different rates. This means that the UPSs both get to the specified low battery duration at completely different times. The problem here is that UPS 1 may have run down to 5 minutes and is in desperate need of initiating a Powerchute shutdown - UPS 2 still has 25 minutes of runtime so no shutdown is initiated. Consequently UPS 1 goes down and takes all the servers with and then shuts down UPS 2 as well! What we need to happen are 1 of either 2 things: Powerchute initiates the shutdown as soon as either UPS reaches the 20 minutes low battery duration setting - and doesnt wait for both The UPS with the heavier load expends its entire battery but does not shutdown both UPSs and lets the load be switched across to the UPS that still has runtime remaining. That way when the UPS that still has runtime reaches its low battery duration it can proceed with the graceful shutdown via Powerchute. Hope that makes sense, any help is greatly appreciated!

  Read the article

• AMD Fusion GPU passthrough to KVM or Xen

  - by BigChief

  Has anyone successfully gotten a passthrough working with the GPU portion of AMD's Fusion APUs (the E-350 is my target) on top of a Linux hypervisor? IE, I want to dedicate the GPU to one VM only, excluding all other VMs as well as the host. I know PCI passthrough can work with patches / kernel rebuilds for Xen and KVM. However, since the GPU is on the same chip, I don't know if the host OS will see it as PCI. I know there are a number of tangential issues here, such as: Poor Fusion drivers in Linux at the moment Unsuccessful patching efforts seem common VT-d / IOMMU is required and (from my reading) is supported on the APU, but the motherboard may not offer it KVM doesn't appear to support primary graphics cards, only secondary graphics cards (described here) However, I'd like to hear from anyone who has messed with this, even failed attempts. Fedora + KVM is my preferred virtualization platform but I'm willing to change that if it makes a difference. EDIT: The goal is to do this for a Windows 7 guest (I know it's asking a lot). Regardless, just assume this is HVM, not PV.

  Read the article

• What is the best VM for developing WPF apps from within OS X?

  - by MarqueIV

  All of my machines are Macs (Mac Pro, MacBook Pro, MacBook Air and Mac Mini (and Apple TV 2.0 too! :) ) but for my day-job, I develop .NET/WPF applications. Normally I just boot into Boot Camp and develop that way, which of course works great, but there are times when I need to simultaneously get to things on my Mac-side of the equation, so I've bought both VMware 3.1 and Parallels 6. Both work, however, even on my Mac Pro where I paid to upgrade to the better video cards (the NVidia 8600s I think vs. the stock ATI cards) the WPF performance bites!! Now this confuses me since both boast that they support not only hardware-accelerated OpenGL 2.1, but also hardware-accelerated DirectX 9 (VMware even allegedly supports DirectX 10!) via their respective virtual drivers and both can run 3D games just fine, even in a window. But even the simple act of resizing a WPF window that has a tiled background results in some HIDEOUS repainting and resizing behaviors. It's damn near closer to what you'd expect over RDP let alone a software-only renderer (forget accelerated hardware completely!) So... can anyone please tell me WTF WPF is doing differently? More importantly, how can I speed up the WPF performance? Should I switch to VirtualBox that also has support for DirectX? Or am I just gonna have to 'byte' the bullet (sorry... had to. So I like puns! Thank Jon Stewart!) and continue using Boot Camp?

  Read the article

• Network card very slow, only on Windows

  - by J Penguin

  This only happens to 1 of my machine, and only when booting into Windows 7. No matter what network card I put in, Windows would default its mode to 10Mbps full duplex. Transfer speed is approximately 1 MB/s. If I set it to 100Mbps, the transfer drops to 100-200K/s. If I set it to 1000Mbps, the connection is lost completely. I've tried swapping in different cards, both PCI-E and PCI. I'v etried update the windows, I've tried reinstalling the drivers... On this very same machine, if I boot into Fedora, it can use the card at its full capacity 1000Mbps transfering 80+ MB/s And all the cards work just fine when plugging into other machines on the same network. I'm very curious. What could be the reason for this? The only different software that this machine has is virtual box with a VPN emulator, but disabling that VPN doesn't seem to do anything. I would like to get this fixed, hopefully, without reinstalling windows _< Will that be possible?

  Read the article

• management network to a network port for additional ones munin and monit

  - by paolo

  management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

  Read the article

• Distortion problem with Creative audio equalizer

  - by e-t172

  Hi, I have a problem with the Creative Console EQ, I don't know if it's fixable or not (is the EQ software or hardware on these cards?). Basically, I have enormous distortion with certain sounds in the 30 - 125 hz range. When this happens I get some sort of "frrzzzz" (sorry, I'm french and don't really know the correct english word for that) on top of the original sound. I have a Sound Blaster Audigy SE. I'm using the Daniel_K drivers, on Windows 7 Profesionnal x64. All the effects are disabled except EQ. Steps to reproduce Put the card in 24bit/96khz mode. The problem is also present with 16bit/48khz but seems to be less audible. In the Creative Console, use the following EQ: (full size) Play this sound at a reasonably high volume. You should hear distortion on the two "booms". Especially the second one. Disable Creative EQ. Play the sound in an application with an integrated EQ (e.g. foobar2000, ffdshow) using the same EQ parameters. There is no distortion. Conclusion: the Creative EQ is broken. Is anyone having the same problem? I'm also interested in the results with other Creative cards or even other brands soundcards with a similar EQ feature.

  Read the article

• Wireless card on HP laptop not working

  - by D. Strout

  I just bought an HP Envy m6-1125dx online from Best Buy. When I got it home and started it up, the wireless card did not work well - at all. I could connect, but any real usage would cause the connection to start dropping every 30 seconds or so, and it would be really slow. Taking another look at the reviews on the Best Buy site, it seems only a few others had this problem, so I took it to my local Best Buy and exchanged it for another unit. Got it home again and the card had the same issues. Which leads to my dilemma. First: does this model have several different cards that it could come with? Mine is a Ralink RT5390R (on both units I received). If it does, then I can keep exchanging until I get a unit with a different card. I wouldn't ask this, except it seems weird that only a few people mentioned this issue, so I thought that might be one possibility. I looked in to replacing the card with a different one myself, but it seems that HP blocks certain wireless cards. However, some people reported success in replacing the card, and this site said it was only an issue on "older HP computer[s]". Can anyone confirm this? Finally, if that fails/will not work, does anyone know what I can get through Best Buy? I am concerned that they will not put any different card than the Ralink, and after two of those, I don't want that. Can I ask Best Buy support to use a different card? Can they even get another card from HP? I guess the base question is: should I attempt to replace the card myself (two days via Amazon to get a new card), should I try to get the laptop repaired through Best Buy (two - four weeks), should I go for a different model laptop from Best Buy, or should I try a different unit of the same model (three's the charm?).

  Read the article

• 10GE network: Is it still deadly expensive? Any options?

  - by BarsMonster

  Hi! I am building home cluster where I going to have about 16 nodes which can live with 1G ports, but I really want to have 10GE on file server & central node. It's all local, so no need for cabels longer than 3-5m. And ofcourse I want to spend as little money as possible (not going to spend more than whole cluster costs) :-) What are my options? 1) Legacy solution is to take some 24-48 port 1GE switch, and connect to file/central nodes via 4-8 aggregated links. This will work I guess, cost is very acceptable, but I am not sure if it's ok to use that much aggregated links. And ofcourse it would be hard to double bandwidth when needed... :-D 2) Switch with several 10GE uplink 'ports'. As far as I see, they all require modules which costs about 1000$, so I will need 4 10G modules, and 2 10GE cards... Smells like way more than 5000$+... 3) Connect file & central node via 2 10G cards directly, and put 4 quadport 1GE NICs on fileserver. I am saving on 2 10G modules and a switch, fileserver will have to do packet routing, but it's still gonna have alot of CPU's left :-) 4) Any other options? Infiniband? 5) Are MyriNet adaptors works fine? I guess there are no cheaper options? 6) Hmm... Scrap fileserver, put it all on central node and provide dedicated 1GE port for each of the nodes... This is sad...

  Read the article

• How can I format an SD card with a more robust Linux-usable filesystem with a specific cluster size for better write performace?

  - by Harvey

  Goal: microSD card formatted... for best write performance for use only with embedded Linux for better reliability (random power failures may occur) using an 64kB cluster size I'm using an 8GB microSD card for data storage inside an embedded Linux/ARM device. The SD card is not removable. I've been using ext3 instead of the pre-installed FAT32 because it seems to better handle random power failures during writes. However, I kept noticing that my write performance is always best with the pre-installed FAT32 from Kingston. If I reformat the card with FAT32, the performance still suffers. After browsing wikipedia, I stumbled upon the following comment saying that some cards are optimized for specific cluster sizes. In my case, the Kingston comes pre-formatted for an 64kB cluster size. Risks of reformatting Reformatting an SD card with a different file system, or even with the same one, may make the card slower, or shorten its lifespan. Some cards use wear leveling, in which frequently modified blocks are mapped to different portions of memory at different times, and some wear-leveling algorithms are designed for the access patterns typical of the file allocation table on a FAT16 or FAT32 device.[60] In addition, the preformatted file system may use a cluster size that matches the erase region of the physical memory on the card; reformatting may change the cluster size and make writes less efficient.

  Read the article

• Wireless keeps shutting off in Windows 7

  - by Nathan Adams

  I have Windows 7 Ultimate 32bit installed on a Dell Latitude XT Tablet and for the life of me I can't figure out this really weird problem. The symptom is that the Wireless will disconnect from the AP and if I tell it to scan again, it says there are no APs in the area. I do have another wireless card in the laptop and if I disable the first one and enable the second, I am able to get onto the wireless however if I want to use the first card again I have to restart. I tried enabling/disabling the device, nothing will kick start the wireless again in the first card without a restart. I even tried different drivers. So, it seems it is random but it does occur more often when there is increased network activity (ie downloading a large file). The laptop doesn't seem to be overheating. I have tried the following: Under "Change Advanced Power Settings" for the current power profile, I set the "Wireless Adapter settings" to "Maximum Performance". Under device manger, I went to the card in question, and went to the advanced tab and set the "Power Saving mode" to "MAX_PSP" Both cards I have seem to exhibit the behavior after awhile. Both models of those cards are: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Gigabyte GN-WS30N 802.11n mini WLAN Card Has anyone have any ideas or ran into this before?

  Read the article

• Two VGA monitors on Lenovo IdeaCentre H520 Desktop

  - by Sebastian-Laurentiu Plesciuc

  I recently bought a Lenovo IdeaCentre H520 computer and two VGA LED monitors. This particular PC has a dedicated NVIDIA Geforce GT630 video card and an integrated Intel HD Graphics 2500 video card. Both cards have VGA out. The Geforce card also has a HDMI out. I have installed Windows 8 and I can't seem to use both cards. I have connected both monitors, one to the VGA out of the Geforce card and one to the VGA out of the integrated card. I looked through the BIOS options for Video and I can only select the dedicated one, the integrate one or the Auto option. This kinda sucks. I was wondering what kind of options I have available. I have a VGA female to DVI A male adaptor, I was wondering if it could work if I can hook it to a DVI A female to HDMI male adaptor and plug one monitor into the VGA out of the Geforce video card and the other through both adapters to the HDMI out. Any chance this could work? I was looking online for a VGA to HDMI live cable but it's kind of expensive.

  Read the article

• How long will a "safely stored" Solid-State-Drive (SSD) keep its data? (e.g. bank safety-deposit box)

  - by user31575

  Here's my usecase: once-and-only-once copy off photos/videos to an internal SATA Solid State Drive (SSD) put this drive in a well-ventilated, air-conditioned bank "safety deposit box" for safe keeping The question: How long can I safely store a solid-state-drive in such an environment? i.e. 0% bitrot, 100% success when "plugged in" Are some SSD drives more reliable than other for this usecase? (e.g. smaller size vs larger size, SLC vs MLC, different brands, etc) More fodder: I have read that solid state memory cards (e..g compactflash, or sd cards) have much longer durability than other media (DVD's, CD's, hard drives) for this usecase (guaranteed against bitrot/other dysfunction on the order of ~ a decades vs a year ). I don't know if this applies to "SSD hard drives". Copying to one 500Gb ssd vs 8 64gb flash drives is easier SSD SATA hard drives have no moving parts, but they have more "visible electronics" than a compact flash card. I don't know if this "visible electronics" can fail, i.e. in contr I know many will point to carbonite, other cloud backup stuff, but I like the simplicity of having physical copies and wanted to understand the risks/implications thanks,

  Read the article

• Can't access server sound card when vnc'd into ubuntu server

  - by Corey Kennedy

  I've set up my ubunutu 10 server with xfce, nxserver, and now tightvncserver so that I can control it remotely from my Windows 7 laptop. NX is working fine for remote access, but when I run (for example) exaile, no sound will be sent through the server's sound card. I installed tightvncserver and connected, but ran into the same problem. Exaile opens, sound isn't muted, I can see that sound cards are installed (via cat /proc/asound/cards), but I can't seem to get the remote sessions to access the server's sound card. Also, just to confirm that the sound card was working I hooked up a montior/keyboard to the server and opened a local xfce session. That worked fine. While I had the local session running, I was also able to open a remote session with NXClient and start exaile - which then successfully piped sound to the local card. After disconnecting the monitor/keyboard and moving the box back to its normal spot, though, I was not able to play sound via either an NX or VNC session. Does anyone have any suggestions? Surely it's possible to configure my remote sessions to pipe sound to the server's sound card, right? Or at least get xfce up and running without a monitor or keyboard but with access to the sound card so I can VNC into it? Thanks!

  Read the article

• How to write rules for persistent net names?

  - by ndemou

  I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Problems reviving old pc including graphics card issue.

  - by Mick

  I have a PC that seemed to have died years ago that I am trying to revive. It has a dual core athlon processor and a gigabyte motherboard. It had two dual output graphics cards, and I have long since forgotten which output would print out the diagnostic information as the PC starts up. Also I suspect that the resolution set on all the monitors was probably higher than my current single monitor is capable of displaying. The motherboard also has a built in graphics card, so I thought it may be simplest to remove both the graphics cards and plug my monitor into the onboard graphics just while I get things going. Does that seem sensible? Now the other problem: The PC has two hard drives. I have no idea which one is the primary one it is attempting to boot from. When I power up, the fan comes on and I hear some chuga-chuga-pause chuga-chuga-pause repeat indefinitely. I'm not sure which device is making the noise. There are no-beeps at any time. I see nothing on the screen at any time, not even for a second. Any suggestions? EDIT: If T start up the PC without the power connected to the CDrom there is no chuga-chugan noise.

  Read the article

• quad sli with gtx 690 not working

  - by Moaadh

  I have two cards GTX 690 (dual core). I did the Sli successfully. Nvidia control panel acknowledges the two cards as quad Sli. However, the problem is that Windows 7 64-bit Ultimate is showing me the graph memory size as 4 GB while it is supposed to be 8 GB because of the Sli. Also the benchmark from all software is giving me a very low score compared to some other guy's benchmark on YouTube. It gives me a big headache. Does anyone know why this is happening? If so, how can I get Windows 7 to recognize all 8 GB of memory? Thanks for your help in advance. My computer specifications: (Processor: Intel Core i7-3930k @3.2GHz(12CPUs))--- (Memory: 65536 MB Ram 1866 MHz)-- (OS: Windows 7 Ultimate 64-bit)-- (OCZ 240GB as SSD PCIe drive for booting and storage disk)-- (DirextX version: DirectX 11)-- (VGA Card: 2 X EVGA GTX 690 Dual GPU. Each GPU is 2 GB, so total memory should be 8 GB.)-- (MotherBoard: ASUS Rampage IV Extreme)-- Others with lesser specifications get a 2500 score in heaven benchmark while I get 1501 as if it is one card.

  Read the article

• securing communication between 2 Linux servers on local network for ports only they need access to

  - by gkdsp

  I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

  Read the article

• Having an issue trying to get Gigabit speed across my network (Ubuntu Server)

  - by user94217

  I've just started looking into the network speeds at my office, the entire network is setup to be "Gigabit". This includes Gb switches, Gb Network cards and Cat 5e cabling. I'm not expecting the full speed, I just want more than ~90 Mb/s. I've been running some tests with iperf the linux tools and checking the hardware with ethtool. I have 3 servers and when doing my checks/test I discovered that the two backup servers can access each other at around 450 Mb/s but when using either one of them to connect and test the main server, I only get the 90Mb/s even though ethtool shows the networking card running at 1000/Full. The only difference between all the server/networking cards is the "Port" which ethtool shows. On the two backup servers the "Port" is shown as MII yet on the other it's shown as "Twisted Pair". When using ethtool -s to manually set the "Port" to MII on the main server, it looses all connectivity and does not show "Speed" or "Duplex". Anyway, Am i doing something wrong? Is there a specific reason my main server cannot use Gb when there appears to be no difference except the "Port"?

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• China’s Better Life Selects Oracle® Retail to Support Hypermarket Growth

  - by user801960

  On Monday, China’s first multi-format retailer, Better Life Commercial Chain Share Co. announced that it has selected a broad selection of Oracle solutions including specific Oracle Retail applications to support the growth of its hypermarket operations. Better Life currently operates 186 hypermarkets, department stores, consumer electronics stores, as well as entertainment and real estate operations across Southern China. The company’s expansion strategy for its hypermarket business is integral to its overall plan for rapid growth in an increasingly competitive market and after evaluating Oracle and SAP, Better Life identified a range of Oracle solutions including components of Oracle Retail Merchandising Operations Management, Oracle Retail Merchandise Planning and Optimization, and Oracle Retail In-Store Operations as key enablers to optimizing its operations. The Oracle Retail offering will help Better Life to create a consolidated view of product, price, inventory and associated back office information that facilitates improved fulfilment of customer demand.  These solutions will also provide a better understanding of inventory from buying through store transactions, delivering actionable insight with which it can make smarter, more profitable decisions around planning, forecasting and replenishment. You can read the full blog post here: http://www.oracle.com/us/corporate/press/1680357

  Read the article

• Workarounds for supporting MVVM in the Silverlight TreeView Control

  - by cibrax

  MVVM (Model-View-ViewModel) is the pattern that you will typically choose for building testable user interfaces either in WPF or Silverlight. This pattern basically relies on the data binding support in those two technologies for mapping an existing model class (the view model) to the different parts of the UI or view. Unfortunately, MVVM was not threated as first citizen for some of controls released out of the box in the Silverlight runtime or the Silverlight toolkit. That means that using data binding for implementing MVVM is not always something trivial and usually requires some customization in the existing controls. In ran into different problems myself trying to fully support data binding in controls like the tree view or the context menu or things like drag & drop.  For that reason, I decided to write this post to show how the tree view control or the tree view items can be customized to support data binding in many of its properties. In first place, you will typically use a tree view for showing hierarchical data so the view model somehow must reflect that hierarchy. An easy way to implement hierarchy in a model is to use a base item element like this one, public abstract class TreeItemModel { public abstract IEnumerable<TreeItemModel> Children; } You can later derive your concrete model classes from that base class. For example, public class CustomerModel { public string FullName { get; set; } public string Address { get; set; } public IEnumerable<OrderModel> Orders { get; set; } }   public class CustomerTreeItemModel : TreeItemModel { public CustomerTreeItemModel(CustomerModel customer) { }   public override IEnumerable<TreeItemModel> Children { get { // Return orders } } } The Children property in the CustomerTreeItem model implementation can return for instance an ObservableCollection<TreeItemModel> with the orders, so the tree view will automatically subscribe to all the changes in the collection. You can bind this model to the tree view control in the UI by using a Hierarchical data template. <e:TreeView x:Name="TreeView" ItemsSource="{Binding Customers}"> <e:TreeView.ItemTemplate> <sdk:HierarchicalDataTemplate ItemsSource="{Binding Children}"> <!-- TEMPLATE --> </sdk:HierarchicalDataTemplate> </e:TreeView.ItemTemplate> </e:TreeView> An interesting behavior with the Children property and the Hierarchical data template is that the Children property is only invoked before the expansion, so you can use lazy load at this point (The tree view control will not expand the whole tree in the first expansion). The problem with using MVVM in this control is that you can not bind properties in model with specific properties of the TreeView item such as IsSelected or IsExpanded. Here is where you need to customize the existing tree view control to support data binding in tree items. public class CustomTreeView : TreeView { public CustomTreeView() { }   protected override DependencyObject GetContainerForItemOverride() { CustomTreeViewItem tvi = new CustomTreeViewItem(); Binding expandedBinding = new Binding("IsExpanded"); expandedBinding.Mode = BindingMode.TwoWay; tvi.SetBinding(CustomTreeViewItem.IsExpandedProperty, expandedBinding); Binding selectedBinding = new Binding("IsSelected"); selectedBinding.Mode = BindingMode.TwoWay; tvi.SetBinding(CustomTreeViewItem.IsSelectedProperty, selectedBinding); return tvi; } }   public class CustomTreeViewItem : TreeViewItem { public CustomTreeViewItem() { }   protected override DependencyObject GetContainerForItemOverride() { CustomTreeViewItem tvi = new CustomTreeViewItem(); Binding expandedBinding = new Binding("IsExpanded"); expandedBinding.Mode = BindingMode.TwoWay; tvi.SetBinding(CustomTreeViewItem.IsExpandedProperty, expandedBinding); Binding selectedBinding = new Binding("IsSelected"); selectedBinding.Mode = BindingMode.TwoWay; tvi.SetBinding(CustomTreeViewItem.IsSelectedProperty, selectedBinding); return tvi; } } You basically need to derive the TreeView and TreeViewItem controls to manually add a binding for the properties you need. In the example above, I am adding a binding for the “IsExpanded” and “IsSelected” properties in the items. The model for the tree items now needs to be extended to support those properties as well, public abstract class TreeItemModel : INotifyPropertyChanged { bool isExpanded = false; bool isSelected = false;   public abstract IEnumerable<TreeItemModel> Children { get; }   public bool IsExpanded { get { return isExpanded; } set { isExpanded = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("IsExpanded")); } }   public bool IsSelected { get { return isSelected; } set { isSelected = value; if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs("IsSelected")); } }   public event PropertyChangedEventHandler PropertyChanged; } However, as soon as you use this custom tree view control, you lose all the automatic styles from the built-in toolkit themes because they are tied to the control type (TreeView in this case).  The only ugly workaround I found so far for this problem is to copy the styles from the Toolkit source code and reuse them in the application.

  Read the article

• GDC 2012: DXT is NOT ENOUGH! Advanced texture compression for games

  GDC 2012: DXT is NOT ENOUGH! Advanced texture compression for games (Pre-recorded GDC content) Tired of fighting to fit your textures on disk? Too many bad reviews on long download times? Fix it! Don't settle for putting your raw DXT files in a ZIP, instead, compress your DXT textures by an extra 50%-70%! This talk will cover various ways to increase the compression of your game textures to allow for smaller distributables without introducing error, and allowing for fast on-demand decompression at run time. We'll cover how to losslessly squeeze your data with Huffman, block expansion, vector quantization, and we'll even take a look at what MegaTexture is doing too. If you've ever fought to fit textures into memory, this is the talk for you. Speaker: Colt McAnlis From: GoogleDevelopers Views: 1132 21 ratings Time: 33:05 More in Science & Technology

  Read the article

• Obsolete Computer Parts as Art [DIY]

  - by Jason Fitzpatrick

  If you’re like most geeks, you’ve got a box of aging computer equipment you just haven’t got around to hauling to your city’s haz-mat drop off site. This simple tutorial turns cast off circuit boards into wall art. While the author of the tutorial opted to use motherboards, you could easily use smaller frames/mats and use old expansion boards too. The process involves inexpensive IKEA frames with mats, popping the I/O ports off the boards to make them thinner, and drilling small mount holes in the backer board to mount the boards in place. Hit up the link below for more details. Motherboard Art [via IKEAHackers] How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >