Search Results

Search found 2533 results on 102 pages for 'hp laserjet 1012'.

Page 31/102 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• If a managed network switch were to overheat, would you consider it no longer reliable?

  - by Scott Szretter

  Here is the scenario - I have a network switch, one of several in a stack. It's fan failed. Soon, there were reports of users with network issues. After quickly replacing the fan, the users were fine, network issues were resolved. I assume the unit was overheating, and thus failing somehow. Today someone suggested to me, that I should not assume the unit is 100% reliable anymore. So what do you think, would an overheat condition (less than 1 day with the fan stopped) potentially cause permanent damage that could at some point come to the surface as future network failures/issues? If it matters, we are talking managed switches such as 3Com/HP SuperStack , ProCurve or PWR-Plus.

  Read the article

• Booting from e-sata drive

  - by petersohn

  I have a HP EliteBook laptop (don't know exact product number), which has an internal hard drive with Windows installed on it. I have an external hard drive with e-sata and USB ports, linux installed on it. When I try to boot from the external drive, it works if I use USB but not if I use e-sata. In the BIOS setup, I have the following boot order set: External SATA drive USB Hard Drive Notebook Upgrade Bay Notebook Hard Drive etc. When I boot from another drive (such as the internal hard drive or from CD-ROM), and have the e-sata cable connected, it works perfectly. Is there any way to boot from the e-sata drive?

  Read the article

• RAID P410i and P812 performance issues

  - by Alexey

  I'm having much trouble with I/O performance of HP DL360 server with two RAID controllers - P410i and P812, Windows Server 2008, 36 GiB RAM and 16 x Intel Xeon x5550. The server runs a bunch of tasks producing heavy sequential I/O, and after about 20-30 minutes of intensive work it looks like the tasks are stuck, not using CPU and with enough free memory (so this cannot be a bottleneck). The same tasks were running quite well on the older server (Windows Server 2003, 4 x Intel Xeon, 12 GiB RAM). RAID cache is present, write-cache battery is installed. Cache is configured as 25% readahead/75% writeback. The swap file resides on the logical disk served by P410i and other logical disks are on P812. Can someone tell me what can be the matter of this? Is this a hardware problem or misconfiguration?

  Read the article

• Teamed network cards on a Proliant Server

  - by Matt

  We have 4 network cards in a Proliant server with Server 2008R2 running Exchange 2010, with 1 card set to a static IP address and the other 3 set to DHCP. I just need some clarification as I have not teamed network cards. Do all the network cards need to have a static IP when I set as a team. The connection that has the static IP is the IP that I need to use for the Server. Is it possible to set the teamed cards to the same static IP or do I have to change the static IP to another IP then use it for the teamed IP? I will be using HP Network Configuration Utility to set this up.

  Read the article

• How can I set the fan speed to 100% on a laptop?

  - by Codemonkey

  I recently purchased a HP Pavilion dv7-4031. When it's cool, it works smoothly and efficiently. However when CPU and GUP temperatures reach 60c and above, the PC starts freezing up and stuttering. I can hear that the fan speeds steadily increase all the way up to 70-80c. This is what pisses me off: I want the fan speeds to run 100% all the time, perhaps preventing the high temperatures in the first place. The way it is now, fan speeds only increase to keep internal temperatures at above 60c. I've searched all over for any sort of speed control, finding nothing. Any help appreciated. I have tried Speedfan. In "Fans" there is nothing listed. I took that as a bad sign. The BIOS is pathetic, and only has 4 or 5 changeable settings, including "Quickstart" and "Boot order"

  Read the article

• What is the most suitable way to manage iSCSI storage for Virtual Environments?

  - by Gabriel Talavera

  We are planning to place a HP MSA P2000 with two FC/iSCSI controllers in our network. We have two options to provide more storage to Virtual Machines (We are running Hyper-V): A) Add iSCSI targets to the Virtual Hosts and then create VHD that we would add to each guest server. B) Directly add iSCSI targets in each guest server. Just wondering if one of those options is better than the other, and which is the common practice in a virtualized environment. Thanks in advance for any input!

  Read the article

• laptop does not boot

  - by devan

  I have hp probook 4520s lap. But now it does not boot. When I press switch on button fans are working but it shows black screen. HDD light just blink one or two times when start but it will not continue. And usually web cam light should blink one time when startup but it doesn't. I connect to different monitor but couldn't see a output. This lap bought 3 months before but it doesn't have international warranty. Therefore I can not do anything. If someone can provide any clue or suggestion that what happened and what should I do, appreciated. thank you.

  Read the article

• Compaq nc4200 screen cutting out and keyboard lagging after dropping - could I repair this?

  - by Holly Gray

  I have a HP Compaq nc4200 laptop. I got it from a family member who no longer needed it, who got it from a sale of old office equipment, so it's at the very least third-hand, and somewhat battered. Today, I dropped it. It seemed unharmed at first, but the screen cuts out every few minutes (sometimes seconds), then fades back. Keyboard input also occasionally starts lagging, as does the mouse. It might be a coincidence, but, oddly, it seems as if, when the screen cuts out, it comes back sooner if I use the trackpad. Is this something that I could fix? What might be causing it?

  Read the article

• can I force server to always use turboboost?

  - by javapowered

  I'm using HP DL360p Gen8 with 2 * Xeon E5-2640. I do not load CPU 100%, i load it only ~10% and so I guess turboboost is not activated. However I'm using my server for trading so I absolutely don't care about CPU loading but I always want to process my data asap. So I want server to operate using maximum 3 GHz. I.e. 90% of CPU time I don't have anything to process. 10% of CPU time I have data to process. But I need to process it ASAP. I need every single microsecond. So I want server to operate always at maximum "turboboosted" mode. Is it possible?

  Read the article

• PC won't post after replacing mobo

  - by Dan

  I am trying to fix an older HP desktop (~2 yrs old) that didn't seem to have video working. The video card on the machine was integrated. After some debugging, it looked to be the mobo, so I went out and got a new one (also with integrated video). Now, it pretty much does the same thing. Here's the symptoms: no video, doesn't post at all, fans DO spin (both chasis and CPU). Any other ideas? I suppose it could be the CPU, but I would think if it was, it would at least post.

  Read the article

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• About Eucalyptus Virtualization Support

  - by rammayur

  I am having hp 540 notebook with processor core 2 duo. I have installed CLC,CC,SC and Walrus runs fine when I try to run NC, I get error "Not virtualization enabled" means my laptop does not support virtualization. I got it. Then, In my college, there is Dell desktop PC having processor Core 2 Duo. But it has virtualization enbled.So I get confused. How same thing has different effects. So my questions are Which thing is essential for Virtualization?? What should I upgrade in my Laptop Processor or buy a new one?

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  Hello, How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

• boot failure trying to install linux distro from a cd

  - by jdamae

  Hoping someone can help me get this installation from a cd going. I'm using an older pc: hp pavillion 2.66Ghz, 512RAM with a BIOS revision of 6/30/2003. I reclaimed some an older drive (Seagate ST340810A) that seems to be working as its recognized in the bios (auto-detected) I downloaded a mini.iso of ubuntu 10.10 that I want to install and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM] and I disabled devices 2-4 so I can just force it to read first from the CDROM. This old pc also has a separate CD writer which is a Sec.Slave, so the Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned cd with the linux distro. So, with these settings I cannot get it to boot. I get the "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". Where do I go from here? Thanks.

  Read the article

• Why does the CPU usage reach 100% when laptop is plugged in?

  - by Mayank

  I have an HP Elitebook 8440p with Windows 7 Ultimate, i7 Processor and 8 GB RAM. For the last couple of days, when I plug-in my laptop for charging, the CPU usage shoots up to 100% and remains there for around 15 minutes. No offending process shows up in Task Manager/Process Explorer but the laptop is practically unusable for that time. The CPU usage becomes normal when I remove the power cord but shoots up again when plugged back. This is happening with different power adapters/wall sockets so it might not be a faulty adapter issue. Why is this happening and any pointer to resolve this issue?

  Read the article

• Windows 2012 Cluster on P6300 SCSI-3 Persistent Reservation issues

  - by Bruno J. Melo

  Scenario: 1 HP 6300 with latest XCS version 1 Command View 10.1 + with hosts defined as Windows 2008 2 BL460c Gen8 Servers with SPP 2012.10 and Windows Server 2012 Datacenter Edition with all the updates + MPIO feature enabled DSM v4.03.00 Cluster Analyser Tool triggers this error: Test Disk 0 does not support SCSI-3 Persistent Reservations commands needed to support clustered Storage Pools. Some storage devices require specific firmware versions or settings to function properly with failover clusters. Please contact your storage administrator or storage vendor to check the configuration of the storage to allow it to function properly with failover clusters. Any ideas? Thanks for your help!

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• Enterprise laptop doesn't recognize WiFi

  - by Michiel

  My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

  Read the article

• Black spray (?) on a laptop's heat sink assembly

  - by arnehehe

  We have a HP Pavilion DV3 4000SB that was given an error on startup that the fan was having problems (System Fan 90b error message) So I decided to open the laptop up and clean the fan, as that seemed the easiest option. Upon opening it up, at first I froze and thought "No wonder! The whole thing's burnt!", but then I started thinking it looked more like someone used a spraycan on it. I looked up a video on youtube of someone disassembling his Pavilion and noticed there wasn't any of the black on his, so my question here is: Have any of you encountered this, or know what it is? Or if it's something that could point to a problem?

  Read the article

• Best way to copy large amount of data between partitions

  - by skinp

  I'm looking to transfer data across 2 lv of an HP-UX server. I have a couple of those transfers to do, some of which are mostly binary (Oracle tablespace...) and some others are more text files (logs...). Used data size of the volumes is between 100Gb and 1Tb. Also, I will be changing the block size from 1K to 8K on some of these partitions... Things I'm looking for: Guarantees data integrity Fastest data transfer speed Keeps file ownership and permissions Right now, I've thought about dd, cp and rsync, but I'm not sure on the best one to use and the best way to use them...

  Read the article

• Using Power Adapter With Slightly Different Rating - Close Enough? [closed]

  - by Ed Liddiard

  Possible Duplicate: Laptop power supplies, does current matter? I'm in Colombia, South America and the power adapter on my HP Pavilion DV4-1125nr laptop died. The adapter is rated at 65W input 1.6A & output 18.5V 3.5A. A friend found me a Dell adapter rated at 65W input 1.5A & output 19.5V 3.34A. Both have center + polarities. Seems very stable and not having unusual heat problems. Do you think it is safe to use this adapter without harming my laptop?

  Read the article

• Remote RIB iLO on Proliant via RIBCL

  - by Wudang

  I'm trying to automate a process for our Ops. The process requires that some windows servers running on blades are shut down, left down for a few hours, the restarted when some other processes complete. This is done by an op logging on to each blade's iLO web interface to stop and start. I've been trying to automate this with HP's cpqlocfg program with partial success. I can issue the GET_POWER, GET_USER_INFO, etc commands but SET_HOST_POWER fails in a specific way. Using the cpqlocfg GET_EVENTLOG command I can see the events XML login and the power comand being issued from the iLO interface but then nothing happens. Some hints from googling suggest ACPI isn't configured properly but I can't find any hits on how to verify this. Am I even using the right command? There's also a few other options like PRESS_PWR_BUTTON etc. Problem is I have nowhere to test this, all I can do at the moment is give a script to ops and ask them to try it as 4am on a Sunday when they try the proc. The shutdown is trivial as I can use the windows "shutdown" command, it's the power on that I need help on. Anyone done this? I'd tag this "rib ribcl ilo" but lack the rep points, sorry.

  Read the article

• WDS updating raid drivers in an already existing image WIM

  - by Tim

  Here is my current setup. WDS installed on Server 2008 R2 for the new driverstore and multicast features. A Windows Server 2003 32bit Standard image built to support previous DL360 models. A new HP DL360 G6 which has a new raid controller in it. I need to add the driver for the raid controller into my Server 2003 32bit standard install image but I can't seem to figure out the correct method to do so. So far I've tried the following: Mounting the image and placing the drivers into the Sysprep drivers folder, adding the PCI device codes into the sysprep.inf file and committing the changes to the image. Pushing the image to a DL360 G4, ensuring the driver is in the correct locations and re-sysprepping the image. Hoping that the new driverstore feature would magically work with 2003 (a guy can dream cant he?) Is there some standard method that I can use to update this image with the new drivers or do I need to start from scratch with an entirely new build? Thanks in advance.

  Read the article

• Smart Array P400 battery failure

  - by RobIII

  The P400 Smart Array controller in my HP DL380G5 is indicating: Battery Status: Failed, Replace Battery 1 in the System Management Homepage. Also the IML indicates: POST Error: 1794-Drive Array - Array Accelerator Battery Charge Low I do have several replacement batteries (actually, several controllers including batteries) lying around at work but never had to actually replace one. I am wondering if the battery replacement (swap) could be done hot or if I need to take down my server to do the battery replacement. I have replaced other spare parts like fans and drives before and all those can be replaced hot. I just don't know about the battery of the P400 Smart Array controller. Any help would be appreciated. EDIT1 For those interested: straight from the horse's mouth: With thanks to Frands Hansen pointing it out here. EDIT2 In the end I did just power down, to be on the safe side and because the manual says so, and replace the battery. Couldn't be easier. Unplugged the old one of the end of the cable (not the end connected to the controller) and reconnected a spare one. The replaced battery is now in the server for about an hour and currently (still) recharging. I'm assuming all will end wel.

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >