Search Results

Search found 771 results on 31 pages for 'justin lawrence'.

Page 31/31 | < Previous Page | 27 28 29 30 31 

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • Source-control 'wet-work'?

    - by Phil Factor
    When a design or creative work is flawed beyond remedy, it is often best to destroy it and start again. The other day, I lost the code to a long and intricate SQL batch I was working on. I’d thought it was impossible, but it happened. With all the technology around that is designed to prevent this occurring, this sort of accident has become a rare event.  If it weren’t for a deranged laptop, and my distraction, the code wouldn’t have been lost this time.  As always, I sighed, had a soothing cup of tea, and typed it all in again.  The new code I hastily tapped in  was much better: I’d held in my head the essence of how the code should work rather than the details: I now knew for certain  the start point, the end, and how it should be achieved. Instantly the detritus of half-baked thoughts fell away and I was able to write logical code that performed better.  Because I could work so quickly, I was able to hold the details of all the columns and variables in my head, and the dynamics of the flow of data. It was, in fact, easier and quicker to start from scratch rather than tidy up and refactor the existing code with its inevitable fumbling and half-baked ideas. What a shame that technology is now so good that developers rarely experience the cleansing shock of losing one’s code and having to rewrite it from scratch.  If you’ve never accidentally lost  your code, then it is worth doing it deliberately once for the experience. Creative people have, until Technology mistakenly prevented it, torn up their drafts or sketches, threw them in the bin, and started again from scratch.  Leonardo’s obsessive reworking of the Mona Lisa was renowned because it was so unusual:  Most artists have been utterly ruthless in destroying work that didn’t quite make it. Authors are particularly keen on writing afresh, and the results are generally positive. Lawrence of Arabia actually lost the entire 250,000 word manuscript of ‘The Seven Pillars of Wisdom’ by accidentally leaving it on a train at Reading station, before rewriting a much better version.  Now, any writer or artist is seduced by technology into altering or refining their work rather than casting it dramatically in the bin or setting a light to it on a bonfire, and rewriting it from the blank page.  It is easy to pick away at a flawed work, but the real creative process is far more brutal. Once, many years ago whilst running a software house that supplied commercial software to local businesses, I’d been supervising an accounting system for a farming cooperative. No packaged system met their needs, and it was all hand-cut code.  For us, it represented a breakthrough as it was for a government organisation, and success would guarantee more contracts. As you’ve probably guessed, the code got mangled in a disk crash just a week before the deadline for delivery, and the many backups all proved to be entirely corrupted by a faulty tape drive.  There were some fragments left on individual machines, but they were all of different versions.  The developers were in despair.  Strangely, I managed to re-write the bulk of a three-month project in a manic and caffeine-soaked weekend.  Sure, that elegant universally-applicable input-form routine was‘nt quite so elegant, but it didn’t really need to be as we knew what forms it needed to support.  Yes, the code lacked architectural elegance and reusability. By dawn on Monday, the application passed its integration tests. The developers rose to the occasion after I’d collapsed, and tidied up what I’d done, though they were reproachful that some of the style and elegance had gone out of the application. By the delivery date, we were able to install it. It was a smaller, faster application than the beta they’d seen and the user-interface had a new, rather Spartan, appearance that we swore was done to conform to the latest in user-interface guidelines. (we switched to Helvetica font to look more ‘Bauhaus’ ). The client was so delighted that he forgave the new bugs that had crept in. I still have the disk that crashed, up in the attic. In IT, we have had mixed experiences from complete re-writes. Lotus 123 never really recovered from a complete rewrite from assembler into C, Borland made the mistake with Arago and Quattro Pro  and Netscape’s complete rewrite of their Navigator 4 browser was a white-knuckle ride. In all cases, the decision to rewrite was a result of extreme circumstances where no other course of action seemed possible.   The rewrite didn’t come out of the blue. I prefer to remember the rewrite of Minix by young Linus Torvalds, or the rewrite of Bitkeeper by a slightly older Linus.  The rewrite of CP/M didn’t do too badly either, did it? Come to think of it, the guy who decided to rewrite the windowing system of the Xerox Star never regretted the decision. I’ll agree that one should often resist calls for a rewrite. One of the worst habits of the more inexperienced programmer is to denigrate whatever code he or she inherits, and then call loudly for a complete rewrite. They are buoyed up by the mistaken belief that they can do better. This, however, is a different psychological phenomenon, more related to the idea of some motorcyclists that they are operating on infinite lives, or the occasional squaddies that if they charge the machine-guns determinedly enough all will be well. Grim experience brings out the humility in any experienced programmer.  I’m referring to quite different circumstances here. Where a team knows the requirements perfectly, are of one mind on methodology and coding standards, and they already have a solution, then what is wrong with considering  a complete rewrite? Rewrites are so painful in the early stages, until that point where one realises the payoff, that even I quail at the thought. One needs a natural disaster to push one over the edge. The trouble is that source-control systems, and disaster recovery systems, are just too good nowadays.   If I were to lose this draft of this very blog post, I know I’d rewrite it much better. However, if you read this, you’ll know I didn’t have the nerve to delete it and start again.  There was a time that one prayed that unreliable hardware would deliver you from an unmaintainable mess of a codebase, but now technology has made us almost entirely immune to such a merciful act of God. An old friend of mine with long experience in the software industry has long had the idea of the ‘source-control wet-work’,  where one hires a malicious hacker in some wild eastern country to hack into one’s own  source control system to destroy all trace of the source to an application. Alas, backup systems are just too good to make this any more than a pipedream. Somehow, it would be difficult to promote the idea. As an alternative, could one construct a source control system that, on doing all the code-quality metrics, would systematically destroy all trace of source code that failed the quality test? Alas, I can’t see many managers buying into the idea. In reading the full story of the near-loss of Toy Story 2, it set me thinking. It turned out that the lucky restoration of the code wasn’t the happy ending one first imagined it to be, because they eventually came to the conclusion that the plot was fundamentally flawed and it all had to be rewritten anyway.  Was this an early  case of the ‘source-control wet-job’?’ It is very hard nowadays to do a rapid U-turn in a development project because we are far too prone to cling to our existing source-code.

    Read the article

  • JSONArray does not work when I am getting the JSON string from the server

    - by Taehoon A Kim
    I've looked up some answers but am not sure why mine is failing exactly... The code looks something like this HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); String json = EntityUtils.toString(httpEntity); //Convert to JsonArray JSONArray jsonArray = new JSONArray(json); Log.i(DEBUG_TAG, Integer.toString(jsonArray.length())); for (int i = 0; i < jsonArray.length(); i++) { JSONObject jsonObject = jsonArray.getJSONObject(i); Log.i(DEBUG_TAG, jsonObject.getString(KEY_ID)); // creating new HashMap HashMap<String, String> map = new HashMap<String, String>(); // adding each child node to HashMap key => value map.put(KEY_ID, jsonObject.getString(KEY_ID)); map.put(KEY_TITLE, jsonObject.getString(KEY_TITLE)); map.put(KEY_ARTIST, jsonObject.getString(KEY_ARTIST)); map.put(KEY_DURATION, jsonObject.getString(KEY_DURATION)); map.put(KEY_VOTECOUNT, jsonObject.getString(KEY_VOTECOUNT)); map.put(KEY_THUMB_URL, jsonObject.getString(KEY_THUMB_URL)); map.put(KEY_GENRE, jsonObject.getString(KEY_GENRE)); //Adding map to ArrayList if (Integer.parseInt(jsonObject.getString(KEY_VOTECOUNT)) == -1){ //If VoteCount is -1 then add to header headerList.add(map); }else { songsList.add(map); } } } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } When I run logcat on String json, it seems to show correct info which is kind of like this... { "userdata": [ { "id": "8", "title": "Baby One More Time", "artist": "Britney Spears", "duration": "03:24:00", "votes": "0", "thumb_url": "http://api.androidhive.info/music/images/dido.png", "genre": null }, { "id": "2", "title": "As Long As You Love Me", "artist": "Justin Bieber", "duration": "05:26:00", "votes": "0", "thumb_url": "http://api.androidhive.info/music/images/enrique.png", "genre": "Rock" } ] } and the logcat on JSONArray jsonArray = new JSONArray(json); tells me that jsonArray.length() 10-31 22:57:28.433: W/CustomizedListView(26945): error! Invalid index 0, size is 0 Please let me know Thank you,

    Read the article

  • Problems with Update Manager

    - by user65965
    Whenever I try to update with update manager I get the following errors: W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-updates/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-backports/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-security/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E:Some index files failed to download. They have been ignored, or old ones used instead. Any help would be much appreciated, thank you. Thank you very much Eliah. I'm still pretty new to Ubuntu. Here's the output I got from the terminal: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise restricted main commercial multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-updates restricted main commercial multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial deb-src http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-security restricted main commercial multiverse universe #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu oneiric partner deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main ## This is a 3rd party script to install and update Oracle Java deb http://www.duinsoft.nl/pkg debs all ## Sun-Java6-JRE deb http://security.ubuntu.com/ubuntu hardy-security main multiverse ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list.save: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.save: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list.distUpgrade: deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps ** /etc/apt/sources.list.d/getdeb.list.save: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.save: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/iefremov-ppa-precise.list: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/iefremov-ppa-precise.list.save: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/jockey.list: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/jockey.list.distUpgrade: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree ** /etc/apt/sources.list.d/jockey.list.save: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list.save: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/precise-partner.list: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/precise-partner.list.save: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list: # deb https://justin-dormandy:[email protected]/commercial-ppa-uploaders/crossover-pro/ubuntu precise main #Added by software-center disabled on upgrade to precise ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: Permission denied ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: Permission denied ** /etc/apt/sources.list.d/screenlets-ppa-precise.list: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/screenlets-ppa-precise.list.save: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list.save: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main

    Read the article

  • Let’s Get Social

    - by Kristin Rose
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} You can try to run from it like a bad Facebook picture but you can’t hide. Social media as we know it is quickly taking over our lives and is not going away any time soon. Though attempting to reach as many Twitter followers as Lady Gaga is daunting, learning how to leverage social media to meet your customer’s needs is not. For Oracle, this means interacting directly with our partners through our many social media outlets, and refraining from posting a mindless status on the pastrami on rye we ate for lunch today… though it was delicious. The “correct” way to go about social media is going to mean something different to each company. For example, sending a customer more than one friend request a day may not be the best way to get their attention, but using social media as a two-way marketing channel is. Oracle’s Partner Business Center’s (PBC) twitter handle was recently mentioned by Elateral as the “ideal way to engage with your market and use social media in the channel”. Why you ask? Because the PBC has two named social media leads manning the Twitter feed at all times, helping partners get the information and answers they need more quickly than a Justin Bieber video gone viral. So whether you want to post a video of your favorite customer attempting the Marshmallow challenge or tweet like there’s no tomorrow, be sure to follow @OraclePartnerBiz today, and see how they can help you achieve your next partner milestone with Oracle. Happy Socializing, The OPN Communications Team v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Diagnosing ADF Mobile iOS deployment problems

    - by Chris Muir
    From time to time I encounter customers who have taken possession of a brand new Apple Mac, have that excited "I've just spent more on a computer then I ever wanted to but it's okay" crazy gleam in their eye, but on pre-loading all the necessary software for Oracle's ADF Mobile to start their mobile campaign, following Oracle's setup instructions and deploying their first app to Apple's XCode iPhone Simulator they hit this error message in the JDeveloper Log-Deployment window: [01:36:46 PM] Deployment cancelled. [01:36:46 PM] ----  Deployment incomplete  ----. [01:36:46 PM] Failed to build the iOS application bundle. [01:36:46 PM] Deployment failed due to one or more errors returned by '/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild'.  The following is a summary of the returned error(s): Command-line execution failed (Return code: 69) "Oh, return code 69, I know that well" I hear you say.  Admittedly the error code is less than useful besides drawing some titters from the peanut gallery. Before explaining what's gone wrong, I think it's useful to teach customers how to diagnose these issues themselves.  When ADF Mobile commences a deployment, be it to Apple's iOS or Google's Android platforms, JDeveloper and ADF Mobile do a good job in the Log window of showing you what the deployment process entails.  In the case of deploying to iOS the log window will literally include the XCode commands executed to complete the deployment cycle. As example here's the log output that was produced before the error message was raised.... take the opportunity to read this line by line and note the command line calls highlighted in blue: (Note some of the following lines have been split over multiple lines to suit reading on this blog, each original line is preceded by a timestamp. Ensure to check the exact commands from JDev) [01:36:33 PM] Target platform is (iOS). [01:36:33 PM] Beginning deployment of ADF Mobile application 'LayoutDemo' to iOS using profile 'IOS_MOBILE_NATIVE_archive1'. [01:36:34 PM] Command-line executed: [/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild, -version] [01:36:34 PM] Command-line execution succeeded. [01:36:34 PM] Running dependency analysis... [01:36:34 PM] Building... [01:36:34 PM] Deploying 3 profiles... [01:36:35 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ApplicationController/ deploy/ApplicationController.jar [01:36:35 PM] WARNING: No Resource Catalog enabled ADF components found to package [01:36:36 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ViewController/ deploy/ViewController.jar [01:36:36 PM] Verifying existence of the .adf source directory of the ADF Mobile application... [01:36:36 PM] Verifying Application Controller project exists... [01:36:36 PM] Verifying application dependencies... [01:36:36 PM] The application may not function correctly because the following dependent libraries are missing: /Users/chris/jdev/jdeveloper/jdeveloper/jdev/extensions/oracle.adf.mobile/ lib/adfmf.springboard.jar [01:36:36 PM] Verifying project dependencies... [01:36:36 PM] Validating application XML files... [01:36:36 PM] Validating XML files in project ApplicationController... [01:36:36 PM] Validating XML files in project ViewController... [01:36:40 PM] Copying common javascript files... [01:36:41 PM] Copying FARs to the ADF Mobile Framework application... [01:36:41 PM] Extracting Feature Archive file, "ApplicationController.jar" to deployment folder, "ApplicationController". [01:36:42 PM] Extracting Feature Archive file, "ViewController.jar" to deployment folder, "ViewController". [01:36:42 PM] Deploying skinning files... [01:36:43 PM] Copying the CVM SDK files built for the x86 processor... [01:36:43 PM] Copying the CVM JDK files built for the x86 processor... [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/x86/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/ Samples/PublicSamples/ LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/jar/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/ temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Copying security related files to the ADF Mobile Framework application... [01:36:44 PM] Command-line executed from path: /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/ [01:36:44 PM] Command-line executed: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild clean install -configuration Debug -sdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/ Developer/SDKs/iPhoneSimulator6.1.sdk DSTROOT=/Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/Destination_Root/ IPHONEOS_DEPLOYMENT_TARGET=5.0 TARGETED_DEVICE_FAMILY=1,2 PRODUCT_NAME=LayoutDemo ADD_SETTINGS_BUNDLE=NO As you can see when we move from JDeveloper undertaking its work, it then passes the code off in the last few lines for Apple's XCode to assemble and deploy the required .ipa file.  From the original error message which followed this complaining about xcodebuild failing with return code 69, we can quickly see the exact command line used to call xcodebuild. As this is the exact command line call with all its options, you're free to open a Terminal window in Mac OSX and execute the same command by simply copying and pasting the command line. And via this you'll then find out what return code actually 69 means.  Unfortunately it's not that exciting. For Macs that have just been installed and configured with XCode, XCode (and for that matter iTunes) which is required by ADF Mobile to deploy must have been run at least once before hand on your brand new Mac (to be clear that's once ever, not once every restart). On doing so you will be presented with a license agreement from Apple that you must accept. Only once you've done this will the command line calls work.  They're currently failing as you haven't accepted the legal terms and conditions. (arguably you an also accept the terms and conditions from the command line too, but ADF Mobile cannot do this on your behalf, so it's just easier to open the tools and confirm the legal requirements that way). Putting aside the error code and its meaning, watching the log window, watching what commands are executed, learning what they do, this will assist you to diagnose issues yourself and solve these sort of issues more relatively quickly.  From my perspective as an Oracle Product Manager, it allows me to say "this is the stuff you don't need to worry about when you use ADF Mobile when it's configured correctly" .... as you can see my salesman qualities shine through. For anyone who is happily using ADF Mobile on a Mac and wondering why you didn't hit these issues, it's quite likely that you already accepted the license conditions before deploying via ADF Mobile.  For instance, though I'm not a fan of iTunes itself, iTunes was one of the first things I loaded on my Mac to access my Justin Bieber albums. Image courtesy of winnond / FreeDigitalPhotos.net

    Read the article

  • How to Identify Which Hardware Component is Failing in Your Computer

    - by Chris Hoffman
    Concluding that your computer has a hardware problem is just the first step. If you’re dealing with a hardware issue and not a software issue, the next step is determining what hardware problem you’re actually dealing with. If you purchased a laptop or pre-built desktop PC and it’s still under warranty, you don’t need to care about this. Have the manufacturer fix the PC for you — figuring it out is their problem. If you’ve built your own PC or you want to fix a computer that’s out of warranty, this is something you’ll need to do on your own. Blue Screen 101: Search for the Error Message This may seem like obvious advice, but searching for information about a blue screen’s error message can help immensely. Most blue screens of death you’ll encounter on modern versions of Windows will likely be caused by hardware failures. The blue screen of death often displays information about the driver that crashed or the type of error it encountered. For example, let’s say you encounter a blue screen that identified “NV4_disp.dll” as the driver that caused the blue screen. A quick Google search will reveal that this is the driver for NVIDIA graphics cards, so you now have somewhere to start. It’s possible that your graphics card is failing if you encounter such an error message. Check Hard Drive SMART Status Hard drives have a built in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. The idea is that the hard drive monitors itself and will notice if it starts to fail, providing you with some advance notice before the drive fails completely. This isn’t perfect, so your hard drive may fail even if SMART says everything is okay. If you see any sort of “SMART error” message, your hard drive is failing. You can use SMART analysis tools to view the SMART health status information your hard drives are reporting. Test Your RAM RAM failure can result in a variety of problems. If the computer writes data to RAM and the RAM returns different data because it’s malfunctioning, you may see application crashes, blue screens, and file system corruption. To test your memory and see if it’s working properly, use Windows’ built-in Memory Diagnostic tool. The Memory Diagnostic tool will write data to every sector of your RAM and read it back afterwards, ensuring that all your RAM is working properly. Check Heat Levels How hot is is inside your computer? Overheating can rsult in blue screens, crashes, and abrupt shut downs. Your computer may be overheating because you’re in a very hot location, it’s ventilated poorly, a fan has stopped inside your computer, or it’s full of dust. Your computer monitors its own internal temperatures and you can access this information. It’s generally available in your computer’s BIOS, but you can also view it with system information utilities such as SpeedFan or Speccy. Check your computer’s recommended temperature level and ensure it’s within the appropriate range. If your computer is overheating, you may see problems only when you’re doing something demanding, such as playing a game that stresses your CPU and graphics card. Be sure to keep an eye on how hot your computer gets when it performs these demanding tasks, not only when it’s idle. Stress Test Your CPU You can use a utility like Prime95 to stress test your CPU. Such a utility will fore your computer’s CPU to perform calculations without allowing it to rest, working it hard and generating heat. If your CPU is becoming too hot, you’ll start to see errors or system crashes. Overclockers use Prime95 to stress test their overclock settings — if Prime95 experiences errors, they throttle back on their overclocks to ensure the CPU runs cooler and more stable. It’s a good way to check if your CPU is stable under load. Stress Test Your Graphics Card Your graphics card can also be stress tested. For example, if your graphics driver crashes while playing games, the games themselves crash, or you see odd graphical corruption, you can run a graphics benchmark utility like 3DMark. The benchmark will stress your graphics card and, if it’s overheating or failing under load, you’ll see graphical problems, crashes, or blue screens while running the benchmark. If the benchmark seems to work fine but you have issues playing a certain game, it may just be a problem with that game. Swap it Out Not every hardware problem is easy to diagnose. If you have a bad motherboard or power supply, their problems may only manifest through occasional odd issues with other components. It’s hard to tell if these components are causing problems unless you replace them completely. Ultimately, the best way to determine whether a component is faulty is to swap it out. For example, if you think your graphics card may be causing your computer to blue screen, pull the graphics card out of your computer and swap in a new graphics card. If everything is working well, it’s likely that your previous graphics card was bad. This isn’t easy for people who don’t have boxes of components sitting around, but it’s the ideal way to troubleshoot. Troubleshooting is all about trial and error, and swapping components out allows you to pin down which component is actually causing the problem through a process of elimination. This isn’t a complete guide to everything that could likely go wrong and how to identify it — someone could write a full textbook on identifying failing components and still not cover everything. But the tips above should give you some places to start dealing with the more common problems. Image Credit: Justin Marty on Flickr     

    Read the article

  • eXML-PARSER output contains unwanted hash references

    - by seaworthy
    So I wrote a parser routine to take one xml file and reparse into another one. This code I later modified to split a large xml file into many small xml files. I am having a problem with an output. Parsing works fine the only thing output also includes unwanted strings like HASH(0x19f9b58), I am not sure why and need set of friendly eyes. use Encode; use XML::Parser; my $parser = XML::Parser->new( Handlers => {Start => \&handle_elem_start, End => \&handle_elem_end,Char => \&handle_char_data,}); my $record; my $file = shift @ARGV; if( $file ) {$parser->parsefile( $file );} exit; sub handle_elem_start { my( $expat, $name, %atts ) = @_; if ($name eq 'articles'){$file="_data.xml";unlink($file);} $record .= "<"; $record .= "$name"; foreach my $key (keys %atts){$record .= " $key=\"$atts{$key}\"";} $record .= ">"; } sub handle_char_data { my( $expat, $text ) = @_; $text = decode_utf8( $text ); $record .= "$text"; } sub handle_elem_end { my( $expat, $name ) = @_; $record .= "</$name>"; if( $name eq 'article' ) { open (MYFILE, '>>'.$file); print MYFILE $record; close (MYFILE); print $record; $record = {}; } return unless( $name eq 'article' ); } Sample output: ... </article>HASH(0x19f9b40) <article doi="10.1103/PhysRevSeriesI.9.304"> <journal short="Phys. Rev. (Series I)" jcode="PRI">Physical Review (Series I)</journal> <volume>9</volume> <issue printdate="1899-11-00">5</issue> <fpage>304</fpage> <lpage>309</lpage> <seqno>1</seqno> <price></price><tocsec>Articles</tocsec> <arttype type="article"></arttype><doi>10.1103/PhysRevSeriesI.9.304</doi> <title>An Investigation of the Magnetic Qualities of Building Brick</title> <authgrp> <author><givenname>O.</givenname><middlename>A.</middlename><surname>Gage</surname></author> <author><givenname>H.</givenname><middlename>E.</middlename><surname>Lawrence</surname></author> </authgrp> <cpyrt> <cpyrtdate date="1899"></cpyrtdate><cpyrtholder>The American Physical Society</cpyrtholder> </cpyrt> </article>HASH(0x19f9b58) ... HASH strings are not wanted, please advise.

    Read the article

  • CodePlex Daily Summary for Friday, June 11, 2010

    CodePlex Daily Summary for Friday, June 11, 2010New ProjectsBIxPress Community Edition: SSIS Toolset BIDS Addin,Audit,Notify,Deploy,Template: BI xPress is a BIDS Addin/standalone application for SQL Developer/DBA. This tool has many features including Auditing, Notification, Deployment, P...C# Shell (cash): Cash is a command-line interpreter (shell), written in C#. It is part of an project to produce tools which replace the traditional GNU/Linux user-l...Chernarus Life Revivved: Chernarus life revivved for arma 2 multiplayerDKAL: DKAL is a distributed authorization policy language. This project contains an engine for running DKAL policies. It is implemented primarly in F#.ImageResizer for Albulle: Application permettant de déployer le contenu pour une la galerie photos php Albulle. L'objectif est de faciliter et automatiser le redimensionnem...Intraweb Active Directory Authentication Demo: A simple demo created using Delphi 7 and Intraweb 9.0.42 with the Active Directory Helper interface to authenticate a user to Active Directory. ...Lokad CQRS - build scalable web sites and enterprise solutions on Windows Azure: Lokad CQRS helps to build scalable cloud applications for Windows Azure. It provides time-proven guidance and .NET Application Blocks to help arc...LRS: Write a concise, reader-focused summary. Write a concise, reader-focused summary. Write a concise, reader-focused summary. ManagementPeople99: ...MEDILIG - MEDICAL LIFE GUARD: Cross-platform EHR/EMR software for the design, implementation and use of autonomous, open database models for multilingual clinical data managemen...NETris - ASP .NET, AJAX, Web Service based Tetris Game: Tetris game with business logic provided via Web Services.Peace Through Force: Peace Through Force is a 2D side scrolling tactical shooter developed in XNA Game Studio 3.1 using C#. The game is targeted to be made available o...Powwa: Util to show battery status and cpu speed on laptop. Uses jWMI's for interfacing with Windows' WMI.Resource Management System: Resource Management system for Internal purpose using WPF,WCF and SilverlighttChat - ASP.NET, Ajax & Web Service based Chat Room: Simple chat room application. Technology: ASP .NET, Ajax, Web Services and MS SQL Server Database. Uses ASP .NET authentication mechanism.Test Project (ignore): This is used to demonstrate CodePlex at meetings. Please ignore this project.Transform Config: Transfom Config lets you use the new configuration transformation feature in Visual Studio 2010 without performing a publish on a web application p...unsocialcity: trying to make a game for facebook called <projectname> - just seemed like a fun idea http://apps.facebook.com/unsocialcityVorbisPlayer: VorbisPlayer is the audio user control for Silverlight games. It plays loop-sets seamless, it solves the short sound problem, and it can play sound...New ReleasesA Guide to Parallel Programming: Drop 5 - Guide Preface, Chapters 1 - 7, and code: This is Drop 5 with Guide Preface, Chapters 1 - 7, Appendix B, Glossary, and References, and the accompanying code samples. This drop requires Visu...CC.Hearts Screen Saver: CC.Hearts Screen Saver 1.0.10.610: The third release of CC.Hearts Screen Saver. Key features are: Further performance enhancements Keyboard commands (Press ? for help) Help Popu...Fiddler Delayed Responses Extension: v1 beta: UI improvement . drag and drop . session markers . icons . layout Algorithm review . Performance issues Thanks to Eric Lawrence for his ideas.FontViewer 2010: FontViewer 2010 (Codename Eraser): This is the installer for the development version ("Eraser") of FontViewer 2010. Because many of the features are under development, functionality...Genuilder: Genuilder 1.2: First release of Genuilder.Extensibility.ImageResizer for Albulle: ImageResizer1.0-bin: Première version. Permet de déployer des images dans un système de fichier (local).imdb movie downloader: myImdb 0.9.5: myImdb 0.9.5KooBoo Image Gallery: Beta 4: This new version has a new example using s3slider script http://www.serie3.info/s3slider/demonstration.html thanks to mshimao Now there are two pl...LogikBug's IoC Container: LogikBug's IoC Container v1.1.1: In this release: I extended the Extensibility namespace. Fixed a few minor issues with the Extensibility namespace.LRS: jlrs: asdfaLRS: jlrs src: jlrs srcMiniTwitter: 1.14: MiniTwitter 1.14 更新内容 修正 リストのインポートをキャンセルしてもタイムラインの名前がリストの名前になるバグを修正 OAuth の承認を取り消した後、再ログインできないバグを修正 インポートするリストを選択せずにインポートをクリックすると落ちるバグを修正 追加 ...NETris - ASP .NET, AJAX, Web Service based Tetris Game: NETris - Source Code and Documentation: Fully functional prototype. Please note that documentation is written in the form of a report as the project was an assignment at Coventry University.Object/Relational Mapper & Code Generator in Net 2.0 for Relational & XML Schema: 2.10: Minor release, incremental changes to sample website and UI templates.Opalis Community Releases: Integration Pack for Standard OIS Logging: The Integration Pack for Standard OIS Logging provides extended Policy Logging functions to OIS and MSSQL. This Integration Pack adds the followin...PicassoCms: 0.6: More intuitive UI, new controlsPowerAuras: PowerAuras-3.0.0K-beta2: New Auras: Item Name Equipment Slot Tracking Changes from beta1 5 new aura textures Fixed Tracking bug Added graphical equipment slot sele...PowerPivot Sample Data: PowerPivot for Excel Tutorial Sample Data-v.2: The PowerPivot Tutorial Sample Data-Version 2 download includes a variety of data sources that you can use to complete the tutorial in the PowerPiv...Powwa: First build: Unpack & built with NetBean 6.8Quick Performance Monitor: Version 1.4: Added functionality to add and remove performance counters at run time. Also added saving and loading to file so sets of performance counters can b...Resonance: TrainNode Client Library: Libraries to access the TrainNode ServiceSharePoint 2010 Taxonomy Import Utility: TaxonomyBuilder Version 1.0.2: New Features Added support for additional term labels per term Added support for Term Set Owners Added support for Term Set stakeholders Upda...Silverlight for Umbraco Media Objects (SUMO): Community Tech Preview: The CTP for SUMO is now live, feedback appreciated!Silverlight Reporting: Initial Release: This is the first release of the code. It includes the source code from Pete's blog post article on Silverlight reporting.Simple.NET: Simple.Mocking 1.0.0.7: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...Smart Voice: Smart Voice 0.2.2: Changelog: Fixed more bugs Added a readme into the archiveSoulHackers Demon Unite(Chinese version): WPFClient pre alpha 2: pre alpha 2, need your feedbackSquiggle - A Free open source Lan Messenger: Squiggle 1.5: File Transfer capability added (With drag/drop support) Message text box maintains history of last 10 messages and you can retrieve them by CTRL+U...SSIS Expression Editor & Tester: Expression Editor and Tester v1.0.1.0: Minor updated release of expression editor tool and editor control. Download and extract the files to get started, no install required. Changes Si...StreamInsight Samples: GregLow HighwayMonitor Samples: Initial Upload of GregLow HighwayMonitor StreamInsight samples. These samples are used in the upcoming free eClinic for StreamInsight and have been...tChat - ASP.NET, Ajax & Web Service based Chat Room: tChat Source Code and Documentation: Functional prototype. T-SQL scripts can be found in the SQL folder. Please note that the documentation is written in a format of a report for a "du...Transform Config: Initial Release: This is the initial release of the project. It's all been thrown together quickly so it's lacking error handling etc, but it's still fully function...UrzaGatherer: UrzaGatherer v2.0.2: Integrate the support of SQL Server Compact Edition 3.5 SP2 for a better portability.Value Injecter: map anything to anything anyway you might imagine: ValueInjecter 1.9: Features map anything to anything flattening unflattening includes sample projects for: asp.net mvc asp.net web-forms win-formsVCC: Latest build, v2.1.30610.0: Automatic drop of latest buildVisual Studio DSite: Picture SlideShow Viewer (Visual C++ 2008): A picture slidershow viewer.VorbisPlayer: VorbisPlayer: The first release of the Silverlight VorbisPlayer, including source code and example files.WCF 4 Templates for Visual Studio 2010: AnonymousOverHttps Template: Produces a WCF service application configured for anonymous calls over HTTPS/SSL. Supplies a BasicHttpBinding default configured for Transport secu...Most Popular ProjectsHaoRan_TokyoTyrantClient.NET Transactional File ManagerSOLID by exampleMemetic NPC Behavior ToolkitSharpotify - Spotify .Net LibraryWCF 4 Templates for Visual Studio 2010SFTP Component for .NET CSharp, VB.NET, and ASP.NETUltimate FTP Component for .NET C#, VB.NET and ASP.NETAnurag Pallaprolu's Code RepositoryBigfootMVCMost Active ProjectsCommunity Forums NNTP bridgejQuery Library for SharePoint Web ServicesRhyduino - Arduino and Managed Codepatterns & practices – Enterprise LibraryNB_Store - Free DotNetNuke Ecommerce Catalog ModuleCassandraemonBlogEngine.NETMediaCoder.NETAndrew's XNA HelpersStyleCop

    Read the article

  • The How-To Geek Holiday Gift Guide (Geeky Stuff We Like)

    - by The Geek
    Welcome to the very first How-To Geek Holiday Gift Guide, where we’ve put together a list of our absolute favorites to help you weed through all of the junk out there to pick the perfect gift for anybody. Though really, it’s just a list of the geeky stuff we want. We’ve got a whole range of items on the list, from cheaper gifts that most anybody can afford, to the really expensive stuff that we’re pretty sure nobody is giving us. Stocking Stuffers Here’s a couple of ideas for items that won’t break the bank. LED Keychain Micro-Light   Magcraft 1/8-Inch Rare Earth Cube Magnets Best little LED keychain light around. If they don’t need the penknife of the above item this is the perfect gift. I give them out by the handfuls and nobody ever says anything but good things about them. I’ve got ones that are years old and still running on the same battery.  Price: $8   Geeks cannot resist magnets. Jason bought this pack for his fridge because he was sick of big clunky magnets… these things are amazing. One tiny magnet, smaller than an Altoid mint, can practically hold a clipboard right to the fridge. Amazing. I spend more time playing with them on the counter than I do actually hanging stuff.  Price: $10 Lots of Geeky Mugs   Astronomy Powerful Green Laser Pointer There’s loads of fun, geeky mugs you can find on Amazon or anywhere else—and they are great choices for the geek who loves their coffee. You can get the Caffeine mug pictured here, or go with an Atari one, Canon Lens, or the Aperture mug based on Portal. Your choice. Price: $7   No, it’s not a light saber, but it’s nearly bright enough to be one—you can illuminate low flying clouds at night or just blind some aliens on your day off. All that for an extremely low price. Loads of fun. Price: $15       Geeky TV Shows and Books Sometimes you just want to relax and enjoy a some TV or a good book. Here’s a few choices. The IT Crowd Fourth Season   Doctor Who, Complete Fifth Series Ridiculous, funny show about nerds in the IT department, loved by almost all the geeks here at HTG. Justin even makes this required watching for new hires in his office so they’ll get his jokes. You can pre-order the fourth season, or pick up seasons one, two, or three for even cheaper. Price: $13   It doesn’t get any more nerdy than Eric’s pick, the fifth all-new series of Doctor Who, where the Daleks are hatching a new master plan from the heart of war-torn London. There’s also alien vampires, humanoid reptiles, and a lot more. Price: $52 Battlestar Galactica Complete Series   MAKE: Electronics: Learning Through Discovery Watch the epic fight to save the human race by finding the fabled planet Earth while being hunted by the robotic Cylons. You can grab the entire series on DVD or Blu-ray, or get the seasons individually. This isn’t your average sci-fi TV show. Price: $150 for Blu-ray.   Want to learn the fundamentals of electronics in a fun, hands-on way? The Make:Electronics book helps you build the circuits and learn how it all works—as if you had any more time between all that registry hacking and loading software on your new PC. Price: $21       Geeky Gadgets for the Gadget-Loving Geek Here’s a few of the items on our gadget list, though lets be honest: geeks are going to love almost any gadget, especially shiny new ones. Klipsch Image S4i Premium Noise-Isolating Headset with 3-Button Apple Control   GP2X Caanoo MAME/Console Emulator If you’re a real music geek looking for some serious quality in the headset for your iPhone or iPod, this is the pair that Alex recommends. They aren’t terribly cheap, but you can get the less expensive S3 earphones instead if you prefer. Price: $50-100   Eric says: “As an owner of an older version, I can say the GP2X is one of my favorite gadgets ever. Touted a “Retro Emulation Juggernaut,” GP2X runs Linux and may be the only open source software console available. Sounds too good to be true, but isn’t.” Price: $150 Roku XDS Streaming Player 1080p   Western Digital WD TV Live Plus HD Media Player If you do a lot of streaming over Netflix, Hulu Plus, Amazon’s Video on Demand, Pandora, and others, the Roku box is a great choice to get your content on your TV without paying a lot of money.  It’s also got Wireless-N built in, and it supports full 1080P HD. Price: $99   If you’ve got a home media collection sitting on a hard drive or a network server, the Western Digital box is probably the cheapest way to get that content on your TV, and it even supports Netflix streaming too. It’ll play loads of formats in full HD quality. Price: $99 Fujitsu ScanSnap S300 Color Mobile Scanner   Doxie, the amazing scanner for documents Trevor said: “This wonderful little scanner has become absolutely essential to me. My desk used to just be a gigantic pile of papers that I didn’t need at the moment, but couldn’t throw away ‘just in case.’ Now, every few weeks, I’ll run that paper pile through this and then happily shred the originals!” Price: $300   If you don’t scan quite as often and are looking for a budget scanner you can throw into your bag, or toss into a drawer in your desk, the Doxie scanner is a great alternative that I’ve been using for a while. It’s half the price, and while it’s not as full-featured as the Fujitsu, it might be a better choice for the very casual user. Price: $150       (Expensive) Gadgets Almost Anybody Will Love If you’re not sure that one of the more geeky presents is gonna work, here’s some gadgets that just about anybody is going to love, especially if they don’t have one already. Of course, some of these are a bit on the expensive side—but it’s a wish list, right? Amazon Kindle       The Kindle weighs less than a paperback book, the screen is amazing and easy on the eyes, and get ready for the kicker: the battery lasts at least a month. We aren’t kidding, either—it really lasts that long. If you don’t feel like spending money for books, you can use it to read PDFs, and if you want to get really geeky, you can hack it for custom screensavers. Price: $139 iPod Touch or iPad       You can’t go wrong with either of these presents—the iPod Touch can do almost everything the iPhone can do, including games, apps, and music, and it has the same Retina display as the iPhone, HD video recording, and a front-facing camera so you can use FaceTime. Price: $229+, depending on model. The iPad is a great tablet for playing games, browsing the web, or just using on your coffee table for guests. It’s well worth buying one—but if you’re buying for yourself, keep in mind that the iPad 2 is probably coming out in 3 months. Price: $500+ MacBook Air  The MacBook Air comes in 11” or 13” versions, and it’s an amazing little machine. It’s lightweight, the battery lasts nearly forever, and it resumes from sleep almost instantly. Since it uses an SSD drive instead of a hard drive, you’re barely going to notice any speed problems for general use. So if you’ve got a lot of money to blow, this is a killer gift. Price: $999 and up. Stuck with No Idea for a Present? Gift Cards! Yeah, you’re not going to win any “thoughtful present” awards with these, but you might just give somebody what they really want—the new Angry Birds HD for their iPad, Cut the Rope, or anything else they want. ITunes Gift Card   Amazon.com Gift Card Somebody in your circle getting a new iPod, iPhone, or iPad? You can get them an iTunes gift card, which they can use to buy music, games or apps. Yep, this way you can gift them a copy of Angry Birds if they don’t already have it. Or even Cut the Rope.   No clue what to get somebody on your list? Amazon gift cards let them buy pretty much anything they want, from organic weirdberries to big screen TVs. Yeah, it’s not as thoughtful as getting them a nice present, but look at the bright side: maybe they’ll get you an Amazon gift card and it’ll balance out. That’s the highlights from our lists—got anything else to add? Share your geeky gift ideas in the comments. Latest Features How-To Geek ETC The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography Happy Snow Bears Theme for Chrome and Iron [Holiday] Download Full Command and Conquer: Tiberian Sun Game for Free Scorched Cometary Planet Wallpaper Quick Fix: Add the RSS Button Back to the Firefox Awesome Bar Dropbox Desktop Client 1.0.0 RC for Windows, Linux, and Mac Released Hang in There Scrat! – Ice Age Wallpaper

    Read the article

  • Standards Corner: OAuth WG Client Registration Problem

    - by Tanu Sood
    Phil Hunt is an active member of multiple industry standards groups and committees (see brief bio at the end of the post) and has spearheaded discussions, creation and ratifications of  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} industry standards including the Kantara Identity Governance Framework, among others. Being an active voice in the industry standards development world, we have invited him to share his discussions, thoughts, news & updates, and discuss use cases, implementation success stories (and even failures) around industry standards on this monthly column. Author: Phil Hunt This afternoon, the OAuth Working Group will meet at IETF88 in Vancouver to discuss some important topics important to the maturation of OAuth. One of them is the OAuth client registration problem.OAuth (RFC6749) was initially developed with a simple deployment model where there is only monopoly or singleton cloud instance of a web API (e.g. there is one Facebook, one Google, on LinkedIn, and so on). When the API publisher and API deployer are the same monolithic entity, it easy for developers to contact the provider and register their app to obtain a client_id and credential.But what happens when the API is for an open source project where there may be 1000s of deployed copies of the API (e.g. such as wordpress). In these cases, the authors of the API are not the people running the API. In these scenarios, how does the developer obtain a client_id? An example of an "open deployed" API is OpenID Connect. Connect defines an OAuth protected resource API that can provide personal information about an authenticated user -- in effect creating a potentially common API for potential identity providers like Facebook, Google, Microsoft, Salesforce, or Oracle. In Oracle's case, Fusion applications will soon have RESTful APIs that are deployed in many different ways in many different environments. How will developers write apps that can work against an openly deployed API with whom the developer can have no prior relationship?At present, the OAuth Working Group has two proposals two consider: Dynamic RegistrationDynamic Registration was originally developed for OpenID Connect and UMA. It defines a RESTful API in which a prospective client application with no client_id creates a new client registration record with a service provider and is issued a client_id and credential along with a registration token that can be used to update registration over time.As proof of success, the OIDC community has done substantial implementation of this spec and feels committed to its use. Why not approve?Well, the answer is that some of us had some concerns, namely: Recognizing instances of software - dynamic registration treats all clients as unique. It has no defined way to recognize that multiple copies of the same client are being registered other then assuming if the registration parameters are similar it might be the same client. Versioning and Policy Approval of open APIs and clients - many service providers have to worry about change management. They expect to have approval cycles that approve versions of server and client software for use in their environment. In some cases approval might be wide open, but in many cases, approval might be down to the specific class of software and version. Registration updates - when does a client actually need to update its registration? Shouldn't it be never? Is there some characteristic of deployed code that would cause it to change? Options lead to complexity - because each client is treated as unique, it becomes unclear how the clients and servers will agree on what credentials forms are acceptable and what OAuth features are allowed and disallowed. Yet the reality is, developers will write their application to work in a limited number of ways. They can't implement all the permutations and combinations that potential service providers might choose. Stateful registration - if the primary motivation for registration is to obtain a client_id and credential, why can't this be done in a stateless fashion using assertions? Denial of service - With so much stateful registration and the need for multiple tokens to be issued, will this not lead to a denial of service attack / risk of resource depletion? At the very least, because of the information gathered, it would difficult for service providers to clean up "failed" registrations and determine active from inactive or false clients. There has yet to be much wide-scale "production" use of dynamic registration other than in small closed communities. Client Association A second proposal, Client Association, has been put forward by Tony Nadalin of Microsoft and myself. We took at look at existing use patterns to come up with a new proposal. At the Berlin meeting, we considered how WS-STS systems work. More recently, I took a review of how mobile messaging clients work. I looked at how Apple, Google, and Microsoft each handle registration with APNS, GCM, and WNS, and a similar pattern emerges. This pattern is to use an existing credential (mutual TLS auth), or client bearer assertion and swap for a device specific bearer assertion.In the client association proposal, the developer's registration with the API publisher is handled by having the developer register with an API publisher (as opposed to the party deploying the API) and obtaining a software "statement". Or, if there is no "publisher" that can sign a statement, the developer may include their own self-asserted software statement.A software statement is a special type of assertion that serves to lock application registration profile information in a signed assertion. The statement is included with the client application and can then be used by the client to swap for an instance specific client assertion as defined by section 4.2 of the OAuth Assertion draft and profiled in the Client Association draft. The software statement provides a way for service provider to recognize and configure policy to approve classes of software clients, and simplifies the actual registration to a simple assertion swap. Because the registration is an assertion swap, registration is no longer "stateful" - meaning the service provider does not need to store any information to support the client (unless it wants to). Has this been implemented yet? Not directly. We've only delivered draft 00 as an alternate way of solving the problem using well-known patterns whose security characteristics and scale characteristics are well understood. Dynamic Take II At roughly the same time that Client Association and Software Statement were published, the authors of Dynamic Registration published a "split" version of the Dynamic Registration (draft-richer-oauth-dyn-reg-core and draft-richer-oauth-dyn-reg-management). While some of the concerns above are addressed, some differences remain. Registration is now a simple POST request. However it defines a new method for issuing client tokens where as Client Association uses RFC6749's existing extension point. The concern here is whether future client access token formats would be addressed properly. Finally, Dyn-reg-core does not yet support software statements. Conclusion The WG has some interesting discussion to bring this back to a single set of specifications. Dynamic Registration has significant implementation, but Client Association could be a much improved way to simplify implementation of the overall OpenID Connect specification and improve adoption. In fairness, the existing editors have already come a long way. Yet there are those with significant investment in the current draft. There are many that have expressed they don't care. They just want a standard. There is lots of pressure on the working group to reach consensus quickly.And that folks is how the sausage is made.Note: John Bradley and Justin Richer recently published draft-bradley-stateless-oauth-client-00 which on first look are getting closer. Some of the details seem less well defined, but the same could be said of client-assoc and software-statement. I hope we can merge these specs this week. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} About the Writer: Phil Hunt joined Oracle as part of the November 2005 acquisition of OctetString Inc. where he headed software development for what is now Oracle Virtual Directory. Since joining Oracle, Phil works as CMTS in the Identity Standards group at Oracle where he developed the Kantara Identity Governance Framework and provided significant input to JSR 351. Phil participates in several standards development organizations such as IETF and OASIS working on federation, authorization (OAuth), and provisioning (SCIM) standards.  Phil blogs at www.independentid.com and a Twitter handle of @independentid.

    Read the article

  • CodePlex Daily Summary for Sunday, October 20, 2013

    CodePlex Daily Summary for Sunday, October 20, 2013Popular ReleasesKerbalAlarmClock: v2.6.1.0 Release: Version 2.6.1.0 Recompiled it for 0.21 Added Crew Alarms (track Kerbal rather than Vessel) Added Distance Target Alarms - distance from target vessel or altitude above planet Added Launch Rendezvous Alarm (under Ascending/Descending Node for Landed craft) - MechJeb2 code - thanks r4m0n Allow restoration of Nodes that you have passed (useful for interplanetary burns) Added missing Dres Transfer Model data - thanks Voneiden Added view only version of Alarm clock to both Space Center...MSBuild Extension Pack: October 2013: Release Blog Post The MSBuild Extension Pack October 2013 release provides a collection of over 480 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...VG-Ripper & PG-Ripper: VG-Ripper 2.9.49: changes NEW: Added Support for "ImageTeam.org links NEW: Added Support for "ImgNext.com" links NEW: Added Support for "HostUrImage.com" links NEW: Added Support for "3XVintage.com" linksMedia Companion: Media Companion MC3.583b: As before release but fixed for no movie poster sourcesNew* Both - Added 'An' as option to ignore in title * Movie - Renaming - added %Z - Sorttitle to Legend * Movie - Renaming - added %O - Audio Channels to Legend * Movie - Remove a poster source from priority list. Reset List back to defaults. * Made Media Companion truly portable application. Fixed* Movie - browse for Poster Or Fanart, allows for jpg, tbn, png and bmp images * Movie - Alt Fanart Browser - Url or Browse window now fully...MoreTerra (Terraria World Viewer): MoreTerra 1.11.3.1: Release 1.11.3.1 ================ = New Features = ================ Added markers for Copper Cache, Silver Cache and the Enchanted Sword. ============= = Bug Fixes = ============= Use Official Colors now no longer tries to change the Draw Wires option instead. World reading was breaking for people with a stock 1.2 Terraria version. Changed world name reading so it does not crash the program if you load MoreTerra while Terraria is saving the world. =================== = Feature Removal = =...patterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3): Includes all changes in v1.3 beta 1 and v1.3 beta 2 Support for Windows 8.1 RTM and VS2013 RTM Xaml: New property: AutoLoadPluginTypes to help control which stock plugins are loaded by default (requires AutoLoadPlugins = true). Support for SystemMediaTransportControls on Windows 8.1 JS: Support for visual markers in the timeline. JS: Support for markers collection and markerreached event. JS: New ChaptersPlugin to automatically populate timeline with chapter tracks. JS: Audio an...Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falsePowerShell Community Extensions: 3.1 Production: PowerShell Community Extensions 3.1 Release NotesOct 17, 2013 This version of PSCX supports Windows PowerShell 3.0 and 4.0 See the ReleaseNotes.txt download above for more information.SQL Power Doc: Version 1.0.2.1: Misc. bug fixes Added logic to resolve members of a Windows Group server login Added columns to Excel workbooks to show definitions for server permissions, server roles, database permissions, and database rolesSocial Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyTerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.LINQ to Twitter: LINQ to Twitter v2.1.09: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.Sandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...C++ REST SDK (codename "Casablanca"): C++ REST SDK 1.3.0: This release fixes multiple customer reported issues as well as the following: Full support for Dev12 binaries and project files Full support for Windows XP New sample highlighting the Client and Server APIs : BlackJack Expose underlying native handle to set custom options on http_client Improvements to Listener Library Note: Dev10 binaries have been dropped as of this release, however the Dev10 project files are still available in the Source CodeAD ACL Scanner: 1.3.2: Minor bug fixed: Powershell 4.0 will report: Select—Object: Parameter cannot be processed because the parameter name p is ambiguous.Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...New ProjectsAdd2Nums: Add2Nums is a VB.NET project that takes 2 numbers, computes their sum and outputs the result. Developed by Justin Mifsud as part of Assignment 1 (7COM0152)Athir: GPAO El_AthirCS-MIC - C# Math Input Control: CS-MIC is a .NET library written in C# designed to give developers easy access to expression parsing.HLS Video Player: An open source over-the-network video player for HLS (Hinkle Light Show)Project Stark: This is a secret project available only to the project owners for the time being.Run ++: Run Plus Plus is a tool that enables you to custom the commands in the "Run" dialog.SimpleAddition: This is a simple ASP.NET in VB.NET page that allows users to enter 2 numbers, and display their sum. SWE 681 Go Fish: Project

    Read the article

  • Usercontrol databinding within a databound datagridview

    - by user328259
    Good day. I'm developing a Windows application and working with Windows Forms; .Net 2.0. I have an issue databinding a generic List of Car Rental Companies to a DataGridView when that list contains (one of its properties) anoother generic List of Car Makes. I also have a UserControl that I need to bind to this [inner] generic list ... Class CarRentalCompany contains: string Name, string Location, List CarMakes Class CarMake contains: string Name, bool isFord, bool isChevy, bool isOther The UserControl has a label for CarMake.Name and 3 checkboxes for each of the booleans of the class. HOw do I make this user control bindable for the class? In my form, I have a DataGridView binded to the CarRentalCompany object. The list CarMakes could be 0 or more items and I can add these as necessary. How do I establish the binding of CarRentalCompanies properly so CarMakes will bind accordingly?? For example, I have: List CarRentalCompanies = new List(); CarRentalCompany company1 = new CarRentalCompany(); company1.Name = "Acme Rentals"; company1.Location = "New York, NY"; company1.CarMakes = new List<CarMake>(); CarMake car1 = new CarMake(); car1.Name = "The Yellow Car"; car1.isFord = true; car1.isChevy = false; car1.isOther = false; company1.CarMakes.Add(car1); CarMake car2 = new CarMake(); car2.Name = "The Blue Car"; car2.isFord = false; car2.isChevy = true; car2.isOther = false; company1.CarMakes.Add(car2); CarMake car3 = new CarMake(); car3.Name = "The Purple Car"; car3.isFord = false; car3.isChevy = false; car3.isOther = true; company1.CarMakes.Add(car3); CarRentalCompanies.Add(company1); CarRentalCompany company2 = new CarRentalCompany(); company1.Name = "Z-Auto Rentals"; company1.Location = "Phoenix, AZ"; company1.CarMakes = new List<CarMake>(); CarMake car4 = new CarMake(); car4.Name = "The OrangeCar"; car4.isFord = true; car4.isChevy = false; car4.isOther = false; company2.CarMakes.Add(car4); CarMake car5 = new CarMake(); car5.Name = "The Red Car"; car5.isFord = true; car5.isChevy = false; car5.isOther = false; company2.CarMakes.Add(car5); CarMake car6 = new CarMake(); car6.Name = "The Green Car"; car6.isFord = true; car6.isChevy = false; car6.isOther = false; company2.CarMakes.Add(car6); CarRentalCompanies.Add(company2); I load my form and in my load form I have the following: Note: CarDataGrid is a DataGridView BindingSource bsTheRentals = new BindingSource(); DataGridViewTextBoxColumn companyName = new DataGridViewTextBoxColumn(); companyName.DataPropertyName = "Name"; companyName.HeaderText = "Company Name"; companyName.Name = "CompanyName"; companyName.AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells; DataGridViewTextBoxColumn companyLocation = new DataGridViewTextBoxColumn(); companyLocation.DataPropertyName = "Location"; companyLocation.HeaderText = "Company Location"; companyLocation.Name = "CompanyLocation"; companyLocation.AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells; ArrayList carMakeColumnsToAdd = new ArrayList(); // Loop through the CarMakes list to add each custom column for (int intX=0; intX < CarRentalCompanies.CarMakes[0].Count; intX++) { // Custom column for user control string carMakeColumnName = "carColumn" + intX; CarMakeListColumn carMakeColumn = new DataGridViewComboBoxColumn(); carMakeColumn.Name = carMakeColumnName; carMakeColumn.DisplayMember = CarRentalCompanies.CarMakes[intX].Name; carMakeColumn.DataSource = CarRentalCompanies.CarMakes; // this is the CarMAkes List carMakeColumn.AutoSizeMode = DataGridViewAutoSizeColumnMode.Fill; carMakeColumnsToAdd.Add(carMakeColumn); } CarDataGrid.DataSource = bsTheRentals; CarDataGrid.Columns.AddRange(new DataGridViewColumn[] { companyName, companylocation, carMakeColumnsToAdd }); CarDataGrid.AutoGenerateColumns = false; The code I provided does not work because I am unfamiliar with UserControls and custom DataGridViewColumns and DataGridViewCells - I know I must derive from these classes in order to use my User Control properly. I appreciate any advice/assistance/help in this. Thank you. Lawrence

    Read the article

  • West Wind WebSurge - an easy way to Load Test Web Applications

    - by Rick Strahl
    A few months ago on a project the subject of load testing came up. We were having some serious issues with a Web application that would start spewing SQL lock errors under somewhat heavy load. These sort of errors can be tough to catch, precisely because they only occur under load and not during typical development testing. To replicate this error more reliably we needed to put a load on the application and run it for a while before these SQL errors would flare up. It’s been a while since I’d looked at load testing tools, so I spent a bit of time looking at different tools and frankly didn’t really find anything that was a good fit. A lot of tools were either a pain to use, didn’t have the basic features I needed, or are extravagantly expensive. In  the end I got frustrated enough to build an initially small custom load test solution that then morphed into a more generic library, then gained a console front end and eventually turned into a full blown Web load testing tool that is now called West Wind WebSurge. I got seriously frustrated looking for tools every time I needed some quick and dirty load testing for an application. If my aim is to just put an application under heavy enough load to find a scalability problem in code, or to simply try and push an application to its limits on the hardware it’s running I shouldn’t have to have to struggle to set up tests. It should be easy enough to get going in a few minutes, so that the testing can be set up quickly so that it can be done on a regular basis without a lot of hassle. And that was the goal when I started to build out my initial custom load tester into a more widely usable tool. If you’re in a hurry and you want to check it out, you can find more information and download links here: West Wind WebSurge Product Page Walk through Video Download link (zip) Install from Chocolatey Source on GitHub For a more detailed discussion of the why’s and how’s and some background continue reading. How did I get here? When I started out on this path, I wasn’t planning on building a tool like this myself – but I got frustrated enough looking at what’s out there to think that I can do better than what’s available for the most common simple load testing scenarios. When we ran into the SQL lock problems I mentioned, I started looking around what’s available for Web load testing solutions that would work for our whole team which consisted of a few developers and a couple of IT guys both of which needed to be able to run the tests. It had been a while since I looked at tools and I figured that by now there should be some good solutions out there, but as it turns out I didn’t really find anything that fit our relatively simple needs without costing an arm and a leg… I spent the better part of a day installing and trying various load testing tools and to be frank most of them were either terrible at what they do, incredibly unfriendly to use, used some terminology I couldn’t even parse, or were extremely expensive (and I mean in the ‘sell your liver’ range of expensive). Pick your poison. There are also a number of online solutions for load testing and they actually looked more promising, but those wouldn’t work well for our scenario as the application is running inside of a private VPN with no outside access into the VPN. Most of those online solutions also ended up being very pricey as well – presumably because of the bandwidth required to test over the open Web can be enormous. When I asked around on Twitter what people were using– I got mostly… crickets. Several people mentioned Visual Studio Load Test, and most other suggestions pointed to online solutions. I did get a bunch of responses though with people asking to let them know what I found – apparently I’m not alone when it comes to finding load testing tools that are effective and easy to use. As to Visual Studio, the higher end skus of Visual Studio and the test edition include a Web load testing tool, which is quite powerful, but there are a number of issues with that: First it’s tied to Visual Studio so it’s not very portable – you need a VS install. I also find the test setup and terminology used by the VS test runner extremely confusing. Heck, it’s complicated enough that there’s even a Pluralsight course on using the Visual Studio Web test from Steve Smith. And of course you need to have one of the high end Visual Studio Skus, and those are mucho Dinero ($$$) – just for the load testing that’s rarely an option. Some of the tools are ultra extensive and let you run analysis tools on the target serves which is useful, but in most cases – just plain overkill and only distracts from what I tend to be ultimately interested in: Reproducing problems that occur at high load, and finding the upper limits and ‘what if’ scenarios as load is ramped up increasingly against a site. Yes it’s useful to have Web app instrumentation, but often that’s not what you’re interested in. I still fondly remember early days of Web testing when Microsoft had the WAST (Web Application Stress Tool) tool, which was rather simple – and also somewhat limited – but easily allowed you to create stress tests very quickly. It had some serious limitations (mainly that it didn’t work with SSL),  but the idea behind it was excellent: Create tests quickly and easily and provide a decent engine to run it locally with minimal setup. You could get set up and run tests within a few minutes. Unfortunately, that tool died a quiet death as so many of Microsoft’s tools that probably were built by an intern and then abandoned, even though there was a lot of potential and it was actually fairly widely used. Eventually the tools was no longer downloadable and now it simply doesn’t work anymore on higher end hardware. West Wind Web Surge – Making Load Testing Quick and Easy So I ended up creating West Wind WebSurge out of rebellious frustration… The goal of WebSurge is to make it drop dead simple to create load tests. It’s super easy to capture sessions either using the built in capture tool (big props to Eric Lawrence, Telerik and FiddlerCore which made that piece a snap), using the full version of Fiddler and exporting sessions, or by manually or programmatically creating text files based on plain HTTP headers to create requests. I’ve been using this tool for 4 months now on a regular basis on various projects as a reality check for performance and scalability and it’s worked extremely well for finding small performance issues. I also use it regularly as a simple URL tester, as it allows me to quickly enter a URL plus headers and content and test that URL and its results along with the ability to easily save one or more of those URLs. A few weeks back I made a walk through video that goes over most of the features of WebSurge in some detail: Note that the UI has slightly changed since then, so there are some UI improvements. Most notably the test results screen has been updated recently to a different layout and to provide more information about each URL in a session at a glance. The video and the main WebSurge site has a lot of info of basic operations. For the rest of this post I’ll talk about a few deeper aspects that may be of interest while also giving a glance at how WebSurge works. Session Capturing As you would expect, WebSurge works with Sessions of Urls that are played back under load. Here’s what the main Session View looks like: You can create session entries manually by individually adding URLs to test (on the Request tab on the right) and saving them, or you can capture output from Web Browsers, Windows Desktop applications that call services, your own applications using the built in Capture tool. With this tool you can capture anything HTTP -SSL requests and content from Web pages, AJAX calls, SOAP or REST services – again anything that uses Windows or .NET HTTP APIs. Behind the scenes the capture tool uses FiddlerCore so basically anything you can capture with Fiddler you can also capture with Web Surge Session capture tool. Alternately you can actually use Fiddler as well, and then export the captured Fiddler trace to a file, which can then be imported into WebSurge. This is a nice way to let somebody capture session without having to actually install WebSurge or for your customers to provide an exact playback scenario for a given set of URLs that cause a problem perhaps. Note that not all applications work with Fiddler’s proxy unless you configure a proxy. For example, .NET Web applications that make HTTP calls usually don’t show up in Fiddler by default. For those .NET applications you can explicitly override proxy settings to capture those requests to service calls. The capture tool also has handy optional filters that allow you to filter by domain, to help block out noise that you typically don’t want to include in your requests. For example, if your pages include links to CDNs, or Google Analytics or social links you typically don’t want to include those in your load test, so by capturing just from a specific domain you are guaranteed content from only that one domain. Additionally you can provide url filters in the configuration file – filters allow to provide filter strings that if contained in a url will cause requests to be ignored. Again this is useful if you don’t filter by domain but you want to filter out things like static image, css and script files etc. Often you’re not interested in the load characteristics of these static and usually cached resources as they just add noise to tests and often skew the overall url performance results. In my testing I tend to care only about my dynamic requests. SSL Captures require Fiddler Note, that in order to capture SSL requests you’ll have to install the Fiddler’s SSL certificate. The easiest way to do this is to install Fiddler and use its SSL configuration options to get the certificate into the local certificate store. There’s a document on the Telerik site that provides the exact steps to get SSL captures to work with Fiddler and therefore with WebSurge. Session Storage A group of URLs entered or captured make up a Session. Sessions can be saved and restored easily as they use a very simple text format that simply stored on disk. The format is slightly customized HTTP header traces separated by a separator line. The headers are standard HTTP headers except that the full URL instead of just the domain relative path is stored as part of the 1st HTTP header line for easier parsing. Because it’s just text and uses the same format that Fiddler uses for exports, it’s super easy to create Sessions by hand manually or under program control writing out to a simple text file. You can see what this format looks like in the Capture window figure above – the raw captured format is also what’s stored to disk and what WebSurge parses from. The only ‘custom’ part of these headers is that 1st line contains the full URL instead of the domain relative path and Host: header. The rest of each header are just plain standard HTTP headers with each individual URL isolated by a separator line. The format used here also uses what Fiddler produces for exports, so it’s easy to exchange or view data either in Fiddler or WebSurge. Urls can also be edited interactively so you can modify the headers easily as well: Again – it’s just plain HTTP headers so anything you can do with HTTP can be added here. Use it for single URL Testing Incidentally I’ve also found this form as an excellent way to test and replay individual URLs for simple non-load testing purposes. Because you can capture a single or many URLs and store them on disk, this also provides a nice HTTP playground where you can record URLs with their headers, and fire them one at a time or as a session and see results immediately. It’s actually an easy way for REST presentations and I find the simple UI flow actually easier than using Fiddler natively. Finally you can save one or more URLs as a session for later retrieval. I’m using this more and more for simple URL checks. Overriding Cookies and Domains Speaking of HTTP headers – you can also overwrite cookies used as part of the options. One thing that happens with modern Web applications is that you have session cookies in use for authorization. These cookies tend to expire at some point which would invalidate a test. Using the Options dialog you can actually override the cookie: which replaces the cookie for all requests with the cookie value specified here. You can capture a valid cookie from a manual HTTP request in your browser and then paste into the cookie field, to replace the existing Cookie with the new one that is now valid. Likewise you can easily replace the domain so if you captured urls on west-wind.com and now you want to test on localhost you can do that easily easily as well. You could even do something like capture on store.west-wind.com and then test on localhost/store which would also work. Running Load Tests Once you’ve created a Session you can specify the length of the test in seconds, and specify the number of simultaneous threads to run each session on. Sessions run through each of the URLs in the session sequentially by default. One option in the options list above is that you can also randomize the URLs so each thread runs requests in a different order. This avoids bunching up URLs initially when tests start as all threads run the same requests simultaneously which can sometimes skew the results of the first few minutes of a test. While sessions run some progress information is displayed: By default there’s a live view of requests displayed in a Console-like window. On the bottom of the window there’s a running total summary that displays where you’re at in the test, how many requests have been processed and what the requests per second count is currently for all requests. Note that for tests that run over a thousand requests a second it’s a good idea to turn off the console display. While the console display is nice to see that something is happening and also gives you slight idea what’s happening with actual requests, once a lot of requests are processed, this UI updating actually adds a lot of CPU overhead to the application which may cause the actual load generated to be reduced. If you are running a 1000 requests a second there’s not much to see anyway as requests roll by way too fast to see individual lines anyway. If you look on the options panel, there is a NoProgressEvents option that disables the console display. Note that the summary display is still updated approximately once a second so you can always tell that the test is still running. Test Results When the test is done you get a simple Results display: On the right you get an overall summary as well as breakdown by each URL in the session. Both success and failures are highlighted so it’s easy to see what’s breaking in your load test. The report can be printed or you can also open the HTML document in your default Web Browser for printing to PDF or saving the HTML document to disk. The list on the right shows you a partial list of the URLs that were fired so you can look in detail at the request and response data. The list can be filtered by success and failure requests. Each list is partial only (at the moment) and limited to a max of 1000 items in order to render reasonably quickly. Each item in the list can be clicked to see the full request and response data: This particularly useful for errors so you can quickly see and copy what request data was used and in the case of a GET request you can also just click the link to quickly jump to the page. For non-GET requests you can find the URL in the Session list, and use the context menu to Test the URL as configured including any HTTP content data to send. You get to see the full HTTP request and response as well as a link in the Request header to go visit the actual page. Not so useful for a POST as above, but definitely useful for GET requests. Finally you can also get a few charts. The most useful one is probably the Request per Second chart which can be accessed from the Charts menu or shortcut. Here’s what it looks like:   Results can also be exported to JSON, XML and HTML. Keep in mind that these files can get very large rather quickly though, so exports can end up taking a while to complete. Command Line Interface WebSurge runs with a small core load engine and this engine is plugged into the front end application I’ve shown so far. There’s also a command line interface available to run WebSurge from the Windows command prompt. Using the command line you can run tests for either an individual URL (similar to AB.exe for example) or a full Session file. By default when it runs WebSurgeCli shows progress every second showing total request count, failures and the requests per second for the entire test. A silent option can turn off this progress display and display only the results. The command line interface can be useful for build integration which allows checking for failures perhaps or hitting a specific requests per second count etc. It’s also nice to use this as quick and dirty URL test facility similar to the way you’d use Apache Bench (ab.exe). Unlike ab.exe though, WebSurgeCli supports SSL and makes it much easier to create multi-URL tests using either manual editing or the WebSurge UI. Current Status Currently West Wind WebSurge is still in Beta status. I’m still adding small new features and tweaking the UI in an attempt to make it as easy and self-explanatory as possible to run. Documentation for the UI and specialty features is also still a work in progress. I plan on open-sourcing this product, but it won’t be free. There’s a free version available that provides a limited number of threads and request URLs to run. A relatively low cost license  removes the thread and request limitations. Pricing info can be found on the Web site – there’s an introductory price which is $99 at the moment which I think is reasonable compared to most other for pay solutions out there that are exorbitant by comparison… The reason code is not available yet is – well, the UI portion of the app is a bit embarrassing in its current monolithic state. The UI started as a very simple interface originally that later got a lot more complex – yeah, that never happens, right? Unless there’s a lot of interest I don’t foresee re-writing the UI entirely (which would be ideal), but in the meantime at least some cleanup is required before I dare to publish it :-). The code will likely be released with version 1.0. I’m very interested in feedback. Do you think this could be useful to you and provide value over other tools you may or may not have used before? I hope so – it already has provided a ton of value for me and the work I do that made the development worthwhile at this point. You can leave a comment below, or for more extensive discussions you can post a message on the West Wind Message Board in the WebSurge section Microsoft MVPs and Insiders get a free License If you’re a Microsoft MVP or a Microsoft Insider you can get a full license for free. Send me a link to your current, official Microsoft profile and I’ll send you a not-for resale license. Send any messages to [email protected]. Resources For more info on WebSurge and to download it to try it out, use the following links. West Wind WebSurge Home Download West Wind WebSurge Getting Started with West Wind WebSurge Video© Rick Strahl, West Wind Technologies, 2005-2014Posted in ASP.NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Use IIS Application Initialization for keeping ASP.NET Apps alive

    - by Rick Strahl
    I've been working quite a bit with Windows Services in the recent months, and well, it turns out that Windows Services are quite a bear to debug, deploy, update and maintain. The process of getting services set up,  debugged and updated is a major chore that has to be extensively documented and or automated specifically. On most projects when a service is built, people end up scrambling for the right 'process' to use for administration. Web app deployment and maintenance on the other hand are common and well understood today, as we are constantly dealing with Web apps. There's plenty of infrastructure and tooling built into Web Tools like Visual Studio to facilitate the process. By comparison Windows Services or anything self-hosted for that matter seems convoluted.In fact, in a recent blog post I mentioned that on a recent project I'd been using self-hosting for SignalR inside of a Windows service, because the application is in fact a 'service' that also needs to send out lots of messages via SignalR. But the reality is that it could just as well be an IIS application with a service component that runs in the background. Either way you look at it, it's either a Windows Service with a built in Web Server, or an IIS application running a Service application, neither of which follows the standard Service or Web App template.Personally I much prefer Web applications. Running inside of IIS I get all the benefits of the IIS platform including service lifetime management (crash and restart), controlled shutdowns, the whole security infrastructure including easy certificate support, hot-swapping of code and the the ability to publish directly to IIS from within Visual Studio with ease.Because of these benefits we set out to move from the self hosted service into an ASP.NET Web app instead.The Missing Link for ASP.NET as a Service: Auto-LoadingI've had moments in the past where I wanted to run a 'service like' application in ASP.NET because when you think about it, it's so much easier to control a Web application remotely. Services are locked into start/stop operations, but if you host inside of a Web app you can write your own ticket and control it from anywhere. In fact nearly 10 years ago I built a background scheduling application that ran inside of ASP.NET and it worked great and it's still running doing its job today.The tricky part for running an app as a service inside of IIS then and now, is how to get IIS and ASP.NET launched so your 'service' stays alive even after an Application Pool reset. 7 years ago I faked it by using a web monitor (my own West Wind Web Monitor app) I was running anyway to monitor my various web sites for uptime, and having the monitor ping my 'service' every 20 seconds to effectively keep ASP.NET alive or fire it back up after a reload. I used a simple scheduler class that also includes some logic for 'self-reloading'. Hacky for sure, but it worked reliably.Luckily today it's much easier and more integrated to get IIS to launch ASP.NET as soon as an Application Pool is started by using the Application Initialization Module. The Application Initialization Module basically allows you to turn on Preloading on the Application Pool and the Site/IIS App, which essentially fires a request through the IIS pipeline as soon as the Application Pool has been launched. This means that effectively your ASP.NET app becomes active immediately, Application_Start is fired making sure your app stays up and running at all times. All the other features like Application Pool recycling and auto-shutdown after idle time still work, but IIS will then always immediately re-launch the application.Getting started with Application InitializationAs of IIS 8 Application Initialization is part of the IIS feature set. For IIS 7 and 7.5 there's a separate download available via Web Platform Installer. Using IIS 8 Application Initialization is an optional install component in Windows or the Windows Server Role Manager: This is an optional component so make sure you explicitly select it.IIS Configuration for Application InitializationInitialization needs to be applied on the Application Pool as well as the IIS Application level. As of IIS 8 these settings can be made through the IIS Administration console.Start with the Application Pool:Here you need to set both the Start Automatically which is always set, and the StartMode which should be set to AlwaysRunning. Both have to be set - the Start Automatically flag is set true by default and controls the starting of the application pool itself while Always Running flag is required in order to launch the application. Without the latter flag set the site settings have no effect.Now on the Site/Application level you can specify whether the site should pre load: Set the Preload Enabled flag to true.At this point ASP.NET apps should auto-load. This is all that's needed to pre-load the site if all you want is to get your site launched automatically.If you want a little more control over the load process you can add a few more settings to your web.config file that allow you to show a static page while the App is starting up. This can be useful if startup is really slow, so rather than displaying blank screen while the user is fiddling their thumbs you can display a static HTML page instead: <system.webServer> <applicationInitialization remapManagedRequestsTo="Startup.htm" skipManagedModules="true"> <add initializationPage="ping.ashx" /> </applicationInitialization> </system.webServer>This allows you to specify a page to execute in a dry run. IIS basically fakes request and pushes it directly into the IIS pipeline without hitting the network. You specify a page and IIS will fake a request to that page in this case ping.ashx which just returns a simple OK string - ie. a fast pipeline request. This request is run immediately after Application Pool restart, and while this request is running and your app is warming up, IIS can display an alternate static page - Startup.htm above. So instead of showing users an empty loading page when clicking a link on your site you can optionally show some sort of static status page that says, "we'll be right back".  I'm not sure if that's such a brilliant idea since this can be pretty disruptive in some cases. Personally I think I prefer letting people wait, but at least get the response they were supposed to get back rather than a random page. But it's there if you need it.Note that the web.config stuff is optional. If you don't provide it IIS hits the default site link (/) and even if there's no matching request at the end of that request it'll still fire the request through the IIS pipeline. Ideally though you want to make sure that an ASP.NET endpoint is hit either with your default page, or by specify the initializationPage to ensure ASP.NET actually gets hit since it's possible for IIS fire unmanaged requests only for static pages (depending how your pipeline is configured).What about AppDomain Restarts?In addition to full Worker Process recycles at the IIS level, ASP.NET also has to deal with AppDomain shutdowns which can occur for a variety of reasons:Files are updated in the BIN folderWeb Deploy to your siteweb.config is changedHard application crashThese operations don't cause the worker process to restart, but they do cause ASP.NET to unload the current AppDomain and start up a new one. Because the features above only apply to Application Pool restarts, AppDomain restarts could also cause your 'ASP.NET service' to stop processing in the background.In order to keep the app running on AppDomain recycles, you can resort to a simple ping in the Application_End event:protected void Application_End() { var client = new WebClient(); var url = App.AdminConfiguration.MonitorHostUrl + "ping.aspx"; client.DownloadString(url); Trace.WriteLine("Application Shut Down Ping: " + url); }which fires any ASP.NET url to the current site at the very end of the pipeline shutdown which in turn ensures that the site immediately starts back up.Manual Configuration in ApplicationHost.configThe above UI corresponds to the following ApplicationHost.config settings. If you're using IIS 7, there's no UI for these flags so you'll have to manually edit them.When you install the Application Initialization component into IIS it should auto-configure the module into ApplicationHost.config. Unfortunately for me, with Mr. Murphy in his best form for me, the module registration did not occur and I had to manually add it.<globalModules> <add name="ApplicationInitializationModule" image="%windir%\System32\inetsrv\warmup.dll" /> </globalModules>Most likely you won't need ever need to add this, but if things are not working it's worth to check if the module is actually registered.Next you need to configure the ApplicationPool and the Web site. The following are the two relevant entries in ApplicationHost.config.<system.applicationHost> <applicationPools> <add name="West Wind West Wind Web Connection" autoStart="true" startMode="AlwaysRunning" managedRuntimeVersion="v4.0" managedPipelineMode="Integrated"> <processModel identityType="LocalSystem" setProfileEnvironment="true" /> </add> </applicationPools> <sites> <site name="Default Web Site" id="1"> <application path="/MPress.Workflow.WebQueueMessageManager" applicationPool="West Wind West Wind Web Connection" preloadEnabled="true"> <virtualDirectory path="/" physicalPath="C:\Clients\…" /> </application> </site> </sites> </system.applicationHost>On the Application Pool make sure to set the autoStart and startMode flags to true and AlwaysRunning respectively. On the site make sure to set the preloadEnabled flag to true.And that's all you should need. You can still set the web.config settings described above as well.ASP.NET as a Service?In the particular application I'm working on currently, we have a queue manager that runs as standalone service that polls a database queue and picks out jobs and processes them on several threads. The service can spin up any number of threads and keep these threads alive in the background while IIS is running doing its own thing. These threads are newly created threads, so they sit completely outside of the IIS thread pool. In order for this service to work all it needs is a long running reference that keeps it alive for the life time of the application.In this particular app there are two components that run in the background on their own threads: A scheduler that runs various scheduled tasks and handles things like picking up emails to send out outside of IIS's scope and the QueueManager. Here's what this looks like in global.asax:public class Global : System.Web.HttpApplication { private static ApplicationScheduler scheduler; private static ServiceLauncher launcher; protected void Application_Start(object sender, EventArgs e) { // Pings the service and ensures it stays alive scheduler = new ApplicationScheduler() { CheckFrequency = 600000 }; scheduler.Start(); launcher = new ServiceLauncher(); launcher.Start(); // register so shutdown is controlled HostingEnvironment.RegisterObject(launcher); }}By keeping these objects around as static instances that are set only once on startup, they survive the lifetime of the application. The code in these classes is essentially unchanged from the Windows Service code except that I could remove the various overrides required for the Windows Service interface (OnStart,OnStop,OnResume etc.). Otherwise the behavior and operation is very similar.In this application ASP.NET serves two purposes: It acts as the host for SignalR and provides the administration interface which allows remote management of the 'service'. I can start and stop the service remotely by shutting down the ApplicationScheduler very easily. I can also very easily feed stats from the queue out directly via a couple of Web requests or (as we do now) through the SignalR service.Registering a Background Object with ASP.NETNotice also the use of the HostingEnvironment.RegisterObject(). This function registers an object with ASP.NET to let it know that it's a background task that should be notified if the AppDomain shuts down. RegisterObject() requires an interface with a Stop() method that's fired and allows your code to respond to a shutdown request. Here's what the IRegisteredObject::Stop() method looks like on the launcher:public void Stop(bool immediate = false) { LogManager.Current.LogInfo("QueueManager Controller Stopped."); Controller.StopProcessing(); Controller.Dispose(); Thread.Sleep(1500); // give background threads some time HostingEnvironment.UnregisterObject(this); }Implementing IRegisterObject should help with reliability on AppDomain shutdowns. Thanks to Justin Van Patten for pointing this out to me on Twitter.RegisterObject() is not required but I would highly recommend implementing it on whatever object controls your background processing to all clean shutdowns when the AppDomain shuts down.Testing it outI'm still in the testing phase with this particular service to see if there are any side effects. But so far it doesn't look like it. With about 50 lines of code I was able to replace the Windows service startup to Web start up - everything else just worked as is. An honorable mention goes to SignalR 2.0's oWin hosting, because with the new oWin based hosting no code changes at all were required, merely a couple of configuration file settings and an assembly directive needed, to point at the SignalR startup class. Sweet!It also seems like SignalR is noticeably faster running inside of IIS compared to self-host. Startup feels faster because of the preload.Starting and Stopping the 'Service'Because the application is running as a Web Server, it's easy to have a Web interface for starting and stopping the services running inside of the service. For our queue manager the SignalR service and front monitoring app has a play and stop button for toggling the queue.If you want more administrative control and have it work more like a Windows Service you can also stop the application pool explicitly from the command line which would be equivalent to stopping and restarting a service.To start and stop from the command line you can use the IIS appCmd tool. To stop:> %windir%\system32\inetsrv\appcmd stop apppool /apppool.name:"Weblog"and to start> %windir%\system32\inetsrv\appcmd start apppool /apppool.name:"Weblog"Note that when you explicitly force the AppPool to stop running either in the UI (on the ApplicationPools page use Start/Stop) or via command line tools, the application pool will not auto-restart immediately. You have to manually start it back up.What's not to like?There are certainly a lot of benefits to running a background service in IIS, but… ASP.NET applications do have more overhead in terms of memory footprint and startup time is a little slower, but generally for server applications this is not a big deal. If the application is stable the service should fire up and stay running indefinitely. A lot of times this kind of service interface can simply be attached to an existing Web application, or if scalability requires be offloaded to its own Web server.Easier to work withBut the ultimate benefit here is that it's much easier to work with a Web app as opposed to a service. While developing I can simply turn off the auto-launch features and launch the service on demand through IIS simply by hitting a page on the site. If I want to shut down an IISRESET -stop will shut down the service easily enough. I can then attach a debugger anywhere I want and this works like any other ASP.NET application. Yes you end up on a background thread for debugging but Visual Studio handles that just fine and if you stay on a single thread this is no different than debugging any other code.SummaryUsing ASP.NET to run background service operations is probably not a super common scenario, but it probably should be something that is considered carefully when building services. Many applications have service like features and with the auto-start functionality of the Application Initialization module, it's easy to build this functionality into ASP.NET. Especially when combined with the notification features of SignalR it becomes very, very easy to create rich services that can also communicate their status easily to the outside world.Whether it's existing applications that need some background processing for scheduling related tasks, or whether you just create a separate site altogether just to host your service it's easy to do and you can leverage the same tool chain you're already using for other Web projects. If you have lots of service projects it's worth considering… give it some thought…© Rick Strahl, West Wind Technologies, 2005-2013Posted in ASP.NET  SignalR  IIS   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • CodePlex Daily Summary for Friday, November 08, 2013

    CodePlex Daily Summary for Friday, November 08, 2013Popular ReleasesDynamics AX 2012 R2 Kitting: AX 2012 R2 CU7 release of Kitting: Here is the AX 2012 R2 CU7 release of kitting. Released both as a XPO and a model.PantheR's GraphX for .NET: GraphX for .NET RELEASE v1.0.1: PLEASE RATE THIS RELEASE IF YOU LIKED IT! THANKS! :) RELEASE 1.0.1 + Changed ExportToImage() parameters: added useZoomControlSurface param that enables zoom control parent visual space to be used for export instead whole GraphArea panel. Using this technique it is possible to export graphs with negative vertices coordinates. + Added common interface IZoomControl for all included Zoom controls + Added new method GraphArea.GenerateGraph() that accepts only optional parameters and will use in...ConEmu - Windows console with tabs: ConEmu 131107 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe"Team Foundation Server Upgrade Guide: v3 - TFS 2013 Upgrade Guide: Welcome to the Team Foundation Server Upgrade Guide Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Known issues NoneUpgrading SharePoint section is not included yet. Independent technical review is pending.Epi Info™ - Community Edition: Epi Info 7 (build 7.1.3.0): ResourcesFor the latest stable downloads and all up-to-date help and training material, please visit the official Epi Info 7 website: http://www.cdc.gov/epiinfo/7 To watch training and overview videos, visit the Epi Info YouTube channel: http://www.youtube.com/user/EpiInfoVideosVidCoder: 1.5.12 Beta: Added an option to preserve Created and Last Modified times when converting files. In Options -> Advanced. Added an option to mark an automatically selected subtitle track as "Default". Updated HandBrake core to SVN 5878. Fixed auto passthrough not applying just after switching to it. Fixed bug where preset/profile/tune could disappear when reverting a preset.Compare .NET Objects: Version 1.7.4.0: Manual merge of patch 15325 from Farris to fix issues 9075 and 9076 relating to defects with Ignoring the Collection Order Applied patch 15263 from MariuszWojcik to support LINQ enumerators.Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2013.9.25): XrmToolbox improvement Correct changing connection from the status dropdown Tools improvement Updated tool Audit Center (v1.2013.9.10) -> Publish entities Iconator (v1.2013.9.27) -> Optimized asynchronous loading of images and entities MetadataDocumentGenerator (v1.2013.11.6) -> Correct system entities reading with incorrect attribute type Script Manager (v1.2013.9.27) -> Retrieve only custom events SiteMapEditor (v1.2013.11.7) -> Reset of CRM 2013 SiteMap ViewLayoutReplicator (v1.201...Microsoft SQL Server Product Samples: Database: SQL Server 2014 CTP2 In-Memory OLTP Sample, based: This sample showcases the new In-Memory OLTP feature, which is part of SQL Server 2014 CTP2. It shows the new memory-optimized tables and natively-compiled stored procedures, and can be used to show the performance benefit of in-memory OLTP. Installation instructions for the sample are included in the file ‘awinmemsample.doc’, which is part of the download. You can ask a question about this sample at the SQL Server Samples Forum Composite C1 CMS - Open Source on .NET: Composite C1 4.1: Composite C1 4.1 (4.1.5058.34326) Write a review for this release - help us improve, recommend us. Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.1 The following are highlights of major changes since Composite C1 4.0: General user features: Drag-and-drop images and files like PDF and Word directly from own your desktop and folders into page content Allow you to install Composite Form Builder ...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Home Access Plus+: v9.7: Updated: JSON.net Fixed: Issue with the Windows 8 App Added: Windows 8.1 App Added: Win: Self Signed HAP+ Install Support Added: Win: Delete File Support Added: Timeout for the Logon Tracker Removed: Error Dialogs on the User Card Fixed: Green line showing over the booking form Note: a web.config file update is requiredWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.Social Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyVeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...Duplica: duplica 0.2.498: this is first stable releaseDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerVG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesWsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...New ProjectsBDTramite: El presente proyecto sera realizado por los alumnos: - Oliver Becerra Briones - Eduardo Tello Cruzado - Gustavo Huaripata Sanchez - Williams Infante PradoCONDIMAR: SISTEMA DE VENTAS CONDIMARCurso20480B201311: course project new horizonsDeck Builder 5000: This application is a very simple tool used to make deck building in your favorite card battling game a breeze! doinikTara: doinik taraDovizHesap: Özel Dvz Gelistirme ProjesiEventSys: Sistema de EventosItems Filter (WPF DataGrid column Filter).: WPF quick filter controls - all where you need it. This is the easiest way to enrich you DataGrid width quick filter in header like in Excell, but not only thatJade: ????????? kolhoz: ??????? ??? ????????? ?????????? ????LINQ2DynamoDB: A type-safe data context for AWS DynamoDB with LINQ and in-memory caching support. Allows to combine DynamoDB's durability with cache speed and read consistencyM5NDFD: MVC5 NorthWind DataFirst Microsoft Forefront 2010 R2 Powershell Extension: Powershell extensions for Microsoft Forefront 2010 R2 to enable usage of powershell from both Portal as Workflow Activity and Synchronization Engine as XMAMulti Database Migrator: Miltiple database migratorMy Bacon Recipe (Prototype): MyBaconRecipe is a VB.NET prototype website for bacon recipes. Users can add, seach & sort recipes. Developed by Justin Mifsud as part of Assignment2 (7COM0152)MYPROJECT-sareddy: Just Sample ProjectObjectStore - An easy to use ObjectRelational-Mapper: An easy to use OR-Mapper which supports Code only(no Designer) and existing Database(no Sync or Codegeneration) by implementing abstract Classes at runtime.Open Electronic Integrated Disease Surveillance System (EIDSS™): SummaryPegion: A LAN Messenger projectPetshop2013_MyM: LolololoppeSmokeTest110713: awdawdPraxis: Esta es la primera prueba.Praxis2: PraxisProject Dionysus: Local Movie App being built undergroundProject JDT: About management system.PROJECT SITI KULIM: project siti punyaProject Taiping: Project TaipingPublic_Library: ???SHRFrameWork: This Framework use EF6 , Repository, Unit of Work and othre patternsteamtesting: teamtestingTheProject: The project for Samara team !Travel Website: Travel Website is a website that contains several hotels. Users can browse these hotels, view detailed info, comment and rate them.?ng d?ng chuy?n và nh?n s? ki?n trên windows: de an xay dung ung dung chuyen va nhan su kien tren windowsVehicle Statistics Analysis: Build a generic framework for extracting second hand vehicle retail pricing. Virtual joystick control (Silverlight, WP): Simple on-screen "virtual" joystick control for SilverlightVisual Studio Coverage file to Emma converter: Visual Studio Coverage file to Emma converter. Simple solution, can apply only one tool to five Visual Studio versions. Fast multicore processing.WebForms DataSourceControl for EntityFramework CodeFirst: A ASP.NET WebForms DataSourceControl for use with DbContext & CodeFirst.WPF Study: wpf study project ???????: ???????,???? Session ??????????.

    Read the article

  • Help! cant login to my forum after .htaccess changes

    - by MrRioku
    I'm running a phpbb forum and I installed an SEO friendly URL Mod. After I installed it I wasn't able to login as the admin nor any other users... Well I've been messing around with this problem for a bit and I did find out that it was the .htaccess file that was causing me not to be able to login. I found out if I comment the canonical part out in the .htaccess file, my website allows me to login and see the working mod just fine but I get "http://phone7forum.com/" instead of what I want which is "http://www.phone7forum.com/ : enter code here # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] enter code here I definitely want the "http://www." since its the best method and holds the best weight.. But when I un-comment it, it will not allow me to login as the admin nor any user... Is there anything I can do to fix this matter??? I'd like to add, before I found this website I installed the Mod "Canonical URL" found here: http://www.phpbb.com/customise/db/mod/canonical_url/ Possibly this might be part of my issue? Maybe I should go undo everything that Mod told me to do and then try un-commenting the canonical section in the .htaccess file? Here is my complete .htaccess file as of now that produces the "http://phone7forum.com/" and allows me to login: [code] # Lines That should already be in your .htacess <Files "config.php"> Order Allow,Deny Deny from All </Files> <Files "common.php"> Order Allow,Deny Deny from All </Files> # You may need to un-comment the following lines # Options +FollowSymlinks # To make sure that rewritten dir or file (/|.html) will not load dir.php in case it exist # Options -MultiViews # REMEBER YOU ONLY NEED TO STARD MOD REWRITE ONCE RewriteEngine On # Uncomment the statement below if you want to make use of # HTTP authentication and it does not already work. # This could be required if you are for example using PHP via Apache CGI. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # REWRITE BASE RewriteBase / # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] # DO NOT GO FURTHER IF THE REQUESTED FILE / DIR DOES EXISTS RewriteCond %{REQUEST_FILENAME} -f RewriteCond %{REQUEST_FILENAME} -d RewriteRule . - [L] ##################################################### # PHPBB SEO REWRITE RULES ALL MODES ##################################################### # AUTHOR : dcz www.phpbb-seo.com # STARTED : 01/2006 ################################# # FORUMS PAGES ############### # FORUM INDEX REWRITERULE WOULD STAND HERE IF USED. "forum" REQUIRES TO BE SET AS FORUM INDEX # RewriteRule ^forum\.html$ index.php [QSA,L,NC] # FORUM ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/?(page([0-9]+)\.html)?$ viewforum.php?f=$2&start=$4 [QSA,L,NC] # TOPIC WITH VIRTUAL FOLDER ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?f=$2&t=$4&start=$6 [QSA,L,NC] # TOPIC WITHOUT FORUM ID & DELIM ALL MODES RewriteRule ^([a-z0-9_-]*)/?(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?forum_uri=$1&t=$3&start=$5 [QSA,L,NC] # PHPBB FILES ALL MODES RewriteRule ^resources/[a-z0-9_-]+/(thumb/)?([0-9]+)$ download/file.php?id=$2&t=$1 [QSA,L,NC] # PROFILES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)\.html$ memberlist.php?mode=viewprofile&u=$2 [QSA,L,NC] # USER MESSAGES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)-(topics|posts)(-([0-9]+))?\.html$ search.php?author_id=$2&sr=$3&start=$5 [QSA,L,NC] # GROUPS ALL MODES RewriteRule ^(group|[a-z0-9_-]*-g)([0-9]+)(-([0-9]+))?\.html$ memberlist.php?mode=group&g=$2&start=$4 [QSA,L,NC] # POST RewriteRule ^post([0-9]+)\.html$ viewtopic.php?p=$1 [QSA,L,NC] # ACTIVE TOPICS RewriteRule ^active-topics(-([0-9]+))?\.html$ search.php?search_id=active_topics&start=$2&sr=topics [QSA,L,NC] # UNANSWERED TOPICS RewriteRule ^unanswered(-([0-9]+))?\.html$ search.php?search_id=unanswered&start=$2&sr=topics [QSA,L,NC] # NEW POSTS RewriteRule ^newposts(-([0-9]+))?\.html$ search.php?search_id=newposts&start=$2&sr=topics [QSA,L,NC] # UNREAD POSTS RewriteRule ^unreadposts(-([0-9]+))?\.html$ search.php?search_id=unreadposts&start=$2 [QSA,L,NC] # THE TEAM RewriteRule ^the-team\.html$ memberlist.php?mode=leaders [QSA,L,NC] # HERE IS A GOOD PLACE TO ADD OTHER PHPBB RELATED REWRITERULES # FORUM WITHOUT ID & DELIM ALL MODES # THESE THREE LINES MUST BE LOCATED AT THE END OF YOUR HTACCESS TO WORK PROPERLY RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([a-z0-9_-]+)/?(page([0-9]+)\.html)?$ viewforum.php?forum_uri=$1&start=$3 [QSA,L,NC] # FIX RELATIVE PATHS : FILES RewriteRule ^.+/(style\.php|ucp\.php|mcp\.php|faq\.php|download/file.php)$ $1 [QSA,L,NC,R=301] # FIX RELATIVE PATHS : IMAGES RewriteRule ^.+/(styles/.*|images/.*)/$ $1 [QSA,L,NC,R=301] # END PHPBB PAGES ##################################################### [/code] Does anyone have any clues as to what I need to do? Any help will be greatly appreciated! Thanks, Justin

    Read the article

  • How John Got 15x Improvement Without Really Trying

    - by rchrd
    The following article was published on a Sun Microsystems website a number of years ago by John Feo. It is still useful and worth preserving. So I'm republishing it here.  How I Got 15x Improvement Without Really Trying John Feo, Sun Microsystems Taking ten "personal" program codes used in scientific and engineering research, the author was able to get from 2 to 15 times performance improvement easily by applying some simple general optimization techniques. Introduction Scientific research based on computer simulation depends on the simulation for advancement. The research can advance only as fast as the computational codes can execute. The codes' efficiency determines both the rate and quality of results. In the same amount of time, a faster program can generate more results and can carry out a more detailed simulation of physical phenomena than a slower program. Highly optimized programs help science advance quickly and insure that monies supporting scientific research are used as effectively as possible. Scientific computer codes divide into three broad categories: ISV, community, and personal. ISV codes are large, mature production codes developed and sold commercially. The codes improve slowly over time both in methods and capabilities, and they are well tuned for most vendor platforms. Since the codes are mature and complex, there are few opportunities to improve their performance solely through code optimization. Improvements of 10% to 15% are typical. Examples of ISV codes are DYNA3D, Gaussian, and Nastran. Community codes are non-commercial production codes used by a particular research field. Generally, they are developed and distributed by a single academic or research institution with assistance from the community. Most users just run the codes, but some develop new methods and extensions that feed back into the general release. The codes are available on most vendor platforms. Since these codes are younger than ISV codes, there are more opportunities to optimize the source code. Improvements of 50% are not unusual. Examples of community codes are AMBER, CHARM, BLAST, and FASTA. Personal codes are those written by single users or small research groups for their own use. These codes are not distributed, but may be passed from professor-to-student or student-to-student over several years. They form the primordial ocean of applications from which community and ISV codes emerge. Government research grants pay for the development of most personal codes. This paper reports on the nature and performance of this class of codes. Over the last year, I have looked at over two dozen personal codes from more than a dozen research institutions. The codes cover a variety of scientific fields, including astronomy, atmospheric sciences, bioinformatics, biology, chemistry, geology, and physics. The sources range from a few hundred lines to more than ten thousand lines, and are written in Fortran, Fortran 90, C, and C++. For the most part, the codes are modular, documented, and written in a clear, straightforward manner. They do not use complex language features, advanced data structures, programming tricks, or libraries. I had little trouble understanding what the codes did or how data structures were used. Most came with a makefile. Surprisingly, only one of the applications is parallel. All developers have access to parallel machines, so availability is not an issue. Several tried to parallelize their applications, but stopped after encountering difficulties. Lack of education and a perception that parallelism is difficult prevented most from trying. I parallelized several of the codes using OpenMP, and did not judge any of the codes as difficult to parallelize. Even more surprising than the lack of parallelism is the inefficiency of the codes. I was able to get large improvements in performance in a matter of a few days applying simple optimization techniques. Table 1 lists ten representative codes [names and affiliation are omitted to preserve anonymity]. Improvements on one processor range from 2x to 15.5x with a simple average of 4.75x. I did not use sophisticated performance tools or drill deep into the program's execution character as one would do when tuning ISV or community codes. Using only a profiler and source line timers, I identified inefficient sections of code and improved their performance by inspection. The changes were at a high level. I am sure there is another factor of 2 or 3 in each code, and more if the codes are parallelized. The study’s results show that personal scientific codes are running many times slower than they should and that the problem is pervasive. Computational scientists are not sloppy programmers; however, few are trained in the art of computer programming or code optimization. I found that most have a working knowledge of some programming language and standard software engineering practices; but they do not know, or think about, how to make their programs run faster. They simply do not know the standard techniques used to make codes run faster. In fact, they do not even perceive that such techniques exist. The case studies described in this paper show that applying simple, well known techniques can significantly increase the performance of personal codes. It is important that the scientific community and the Government agencies that support scientific research find ways to better educate academic scientific programmers. The inefficiency of their codes is so bad that it is retarding both the quality and progress of scientific research. # cacheperformance redundantoperations loopstructures performanceimprovement 1 x x 15.5 2 x 2.8 3 x x 2.5 4 x 2.1 5 x x 2.0 6 x 5.0 7 x 5.8 8 x 6.3 9 2.2 10 x x 3.3 Table 1 — Area of improvement and performance gains of 10 codes The remainder of the paper is organized as follows: sections 2, 3, and 4 discuss the three most common sources of inefficiencies in the codes studied. These are cache performance, redundant operations, and loop structures. Each section includes several examples. The last section summaries the work and suggests a possible solution to the issues raised. Optimizing cache performance Commodity microprocessor systems use caches to increase memory bandwidth and reduce memory latencies. Typical latencies from processor to L1, L2, local, and remote memory are 3, 10, 50, and 200 cycles, respectively. Moreover, bandwidth falls off dramatically as memory distances increase. Programs that do not use cache effectively run many times slower than programs that do. When optimizing for cache, the biggest performance gains are achieved by accessing data in cache order and reusing data to amortize the overhead of cache misses. Secondary considerations are prefetching, associativity, and replacement; however, the understanding and analysis required to optimize for the latter are probably beyond the capabilities of the non-expert. Much can be gained simply by accessing data in the correct order and maximizing data reuse. 6 out of the 10 codes studied here benefited from such high level optimizations. Array Accesses The most important cache optimization is the most basic: accessing Fortran array elements in column order and C array elements in row order. Four of the ten codes—1, 2, 4, and 10—got it wrong. Compilers will restructure nested loops to optimize cache performance, but may not do so if the loop structure is too complex, or the loop body includes conditionals, complex addressing, or function calls. In code 1, the compiler failed to invert a key loop because of complex addressing do I = 0, 1010, delta_x IM = I - delta_x IP = I + delta_x do J = 5, 995, delta_x JM = J - delta_x JP = J + delta_x T1 = CA1(IP, J) + CA1(I, JP) T2 = CA1(IM, J) + CA1(I, JM) S1 = T1 + T2 - 4 * CA1(I, J) CA(I, J) = CA1(I, J) + D * S1 end do end do In code 2, the culprit is conditionals do I = 1, N do J = 1, N If (IFLAG(I,J) .EQ. 0) then T1 = Value(I, J-1) T2 = Value(I-1, J) T3 = Value(I, J) T4 = Value(I+1, J) T5 = Value(I, J+1) Value(I,J) = 0.25 * (T1 + T2 + T5 + T4) Delta = ABS(T3 - Value(I,J)) If (Delta .GT. MaxDelta) MaxDelta = Delta endif enddo enddo I fixed both programs by inverting the loops by hand. Code 10 has three-dimensional arrays and triply nested loops. The structure of the most computationally intensive loops is too complex to invert automatically or by hand. The only practical solution is to transpose the arrays so that the dimension accessed by the innermost loop is in cache order. The arrays can be transposed at construction or prior to entering a computationally intensive section of code. The former requires all array references to be modified, while the latter is cost effective only if the cost of the transpose is amortized over many accesses. I used the second approach to optimize code 10. Code 5 has four-dimensional arrays and loops are nested four deep. For all of the reasons cited above the compiler is not able to restructure three key loops. Assume C arrays and let the four dimensions of the arrays be i, j, k, and l. In the original code, the index structure of the three loops is L1: for i L2: for i L3: for i for l for l for j for k for j for k for j for k for l So only L3 accesses array elements in cache order. L1 is a very complex loop—much too complex to invert. I brought the loop into cache alignment by transposing the second and fourth dimensions of the arrays. Since the code uses a macro to compute all array indexes, I effected the transpose at construction and changed the macro appropriately. The dimensions of the new arrays are now: i, l, k, and j. L3 is a simple loop and easily inverted. L2 has a loop-carried scalar dependence in k. By promoting the scalar name that carries the dependence to an array, I was able to invert the third and fourth subloops aligning the loop with cache. Code 5 is by far the most difficult of the four codes to optimize for array accesses; but the knowledge required to fix the problems is no more than that required for the other codes. I would judge this code at the limits of, but not beyond, the capabilities of appropriately trained computational scientists. Array Strides When a cache miss occurs, a line (64 bytes) rather than just one word is loaded into the cache. If data is accessed stride 1, than the cost of the miss is amortized over 8 words. Any stride other than one reduces the cost savings. Two of the ten codes studied suffered from non-unit strides. The codes represent two important classes of "strided" codes. Code 1 employs a multi-grid algorithm to reduce time to convergence. The grids are every tenth, fifth, second, and unit element. Since time to convergence is inversely proportional to the distance between elements, coarse grids converge quickly providing good starting values for finer grids. The better starting values further reduce the time to convergence. The downside is that grids of every nth element, n > 1, introduce non-unit strides into the computation. In the original code, much of the savings of the multi-grid algorithm were lost due to this problem. I eliminated the problem by compressing (copying) coarse grids into continuous memory, and rewriting the computation as a function of the compressed grid. On convergence, I copied the final values of the compressed grid back to the original grid. The savings gained from unit stride access of the compressed grid more than paid for the cost of copying. Using compressed grids, the loop from code 1 included in the previous section becomes do j = 1, GZ do i = 1, GZ T1 = CA(i+0, j-1) + CA(i-1, j+0) T4 = CA1(i+1, j+0) + CA1(i+0, j+1) S1 = T1 + T4 - 4 * CA1(i+0, j+0) CA(i+0, j+0) = CA1(i+0, j+0) + DD * S1 enddo enddo where CA and CA1 are compressed arrays of size GZ. Code 7 traverses a list of objects selecting objects for later processing. The labels of the selected objects are stored in an array. The selection step has unit stride, but the processing steps have irregular stride. A fix is to save the parameters of the selected objects in temporary arrays as they are selected, and pass the temporary arrays to the processing functions. The fix is practical if the same parameters are used in selection as in processing, or if processing comprises a series of distinct steps which use overlapping subsets of the parameters. Both conditions are true for code 7, so I achieved significant improvement by copying parameters to temporary arrays during selection. Data reuse In the previous sections, we optimized for spatial locality. It is also important to optimize for temporal locality. Once read, a datum should be used as much as possible before it is forced from cache. Loop fusion and loop unrolling are two techniques that increase temporal locality. Unfortunately, both techniques increase register pressure—as loop bodies become larger, the number of registers required to hold temporary values grows. Once register spilling occurs, any gains evaporate quickly. For multiprocessors with small register sets or small caches, the sweet spot can be very small. In the ten codes presented here, I found no opportunities for loop fusion and only two opportunities for loop unrolling (codes 1 and 3). In code 1, unrolling the outer and inner loop one iteration increases the number of result values computed by the loop body from 1 to 4, do J = 1, GZ-2, 2 do I = 1, GZ-2, 2 T1 = CA1(i+0, j-1) + CA1(i-1, j+0) T2 = CA1(i+1, j-1) + CA1(i+0, j+0) T3 = CA1(i+0, j+0) + CA1(i-1, j+1) T4 = CA1(i+1, j+0) + CA1(i+0, j+1) T5 = CA1(i+2, j+0) + CA1(i+1, j+1) T6 = CA1(i+1, j+1) + CA1(i+0, j+2) T7 = CA1(i+2, j+1) + CA1(i+1, j+2) S1 = T1 + T4 - 4 * CA1(i+0, j+0) S2 = T2 + T5 - 4 * CA1(i+1, j+0) S3 = T3 + T6 - 4 * CA1(i+0, j+1) S4 = T4 + T7 - 4 * CA1(i+1, j+1) CA(i+0, j+0) = CA1(i+0, j+0) + DD * S1 CA(i+1, j+0) = CA1(i+1, j+0) + DD * S2 CA(i+0, j+1) = CA1(i+0, j+1) + DD * S3 CA(i+1, j+1) = CA1(i+1, j+1) + DD * S4 enddo enddo The loop body executes 12 reads, whereas as the rolled loop shown in the previous section executes 20 reads to compute the same four values. In code 3, two loops are unrolled 8 times and one loop is unrolled 4 times. Here is the before for (k = 0; k < NK[u]; k++) { sum = 0.0; for (y = 0; y < NY; y++) { sum += W[y][u][k] * delta[y]; } backprop[i++]=sum; } and after code for (k = 0; k < KK - 8; k+=8) { sum0 = 0.0; sum1 = 0.0; sum2 = 0.0; sum3 = 0.0; sum4 = 0.0; sum5 = 0.0; sum6 = 0.0; sum7 = 0.0; for (y = 0; y < NY; y++) { sum0 += W[y][0][k+0] * delta[y]; sum1 += W[y][0][k+1] * delta[y]; sum2 += W[y][0][k+2] * delta[y]; sum3 += W[y][0][k+3] * delta[y]; sum4 += W[y][0][k+4] * delta[y]; sum5 += W[y][0][k+5] * delta[y]; sum6 += W[y][0][k+6] * delta[y]; sum7 += W[y][0][k+7] * delta[y]; } backprop[k+0] = sum0; backprop[k+1] = sum1; backprop[k+2] = sum2; backprop[k+3] = sum3; backprop[k+4] = sum4; backprop[k+5] = sum5; backprop[k+6] = sum6; backprop[k+7] = sum7; } for one of the loops unrolled 8 times. Optimizing for temporal locality is the most difficult optimization considered in this paper. The concepts are not difficult, but the sweet spot is small. Identifying where the program can benefit from loop unrolling or loop fusion is not trivial. Moreover, it takes some effort to get it right. Still, educating scientific programmers about temporal locality and teaching them how to optimize for it will pay dividends. Reducing instruction count Execution time is a function of instruction count. Reduce the count and you usually reduce the time. The best solution is to use a more efficient algorithm; that is, an algorithm whose order of complexity is smaller, that converges quicker, or is more accurate. Optimizing source code without changing the algorithm yields smaller, but still significant, gains. This paper considers only the latter because the intent is to study how much better codes can run if written by programmers schooled in basic code optimization techniques. The ten codes studied benefited from three types of "instruction reducing" optimizations. The two most prevalent were hoisting invariant memory and data operations out of inner loops. The third was eliminating unnecessary data copying. The nature of these inefficiencies is language dependent. Memory operations The semantics of C make it difficult for the compiler to determine all the invariant memory operations in a loop. The problem is particularly acute for loops in functions since the compiler may not know the values of the function's parameters at every call site when compiling the function. Most compilers support pragmas to help resolve ambiguities; however, these pragmas are not comprehensive and there is no standard syntax. To guarantee that invariant memory operations are not executed repetitively, the user has little choice but to hoist the operations by hand. The problem is not as severe in Fortran programs because in the absence of equivalence statements, it is a violation of the language's semantics for two names to share memory. Codes 3 and 5 are C programs. In both cases, the compiler did not hoist all invariant memory operations from inner loops. Consider the following loop from code 3 for (y = 0; y < NY; y++) { i = 0; for (u = 0; u < NU; u++) { for (k = 0; k < NK[u]; k++) { dW[y][u][k] += delta[y] * I1[i++]; } } } Since dW[y][u] can point to the same memory space as delta for one or more values of y and u, assignment to dW[y][u][k] may change the value of delta[y]. In reality, dW and delta do not overlap in memory, so I rewrote the loop as for (y = 0; y < NY; y++) { i = 0; Dy = delta[y]; for (u = 0; u < NU; u++) { for (k = 0; k < NK[u]; k++) { dW[y][u][k] += Dy * I1[i++]; } } } Failure to hoist invariant memory operations may be due to complex address calculations. If the compiler can not determine that the address calculation is invariant, then it can hoist neither the calculation nor the associated memory operations. As noted above, code 5 uses a macro to address four-dimensional arrays #define MAT4D(a,q,i,j,k) (double *)((a)->data + (q)*(a)->strides[0] + (i)*(a)->strides[3] + (j)*(a)->strides[2] + (k)*(a)->strides[1]) The macro is too complex for the compiler to understand and so, it does not identify any subexpressions as loop invariant. The simplest way to eliminate the address calculation from the innermost loop (over i) is to define a0 = MAT4D(a,q,0,j,k) before the loop and then replace all instances of *MAT4D(a,q,i,j,k) in the loop with a0[i] A similar problem appears in code 6, a Fortran program. The key loop in this program is do n1 = 1, nh nx1 = (n1 - 1) / nz + 1 nz1 = n1 - nz * (nx1 - 1) do n2 = 1, nh nx2 = (n2 - 1) / nz + 1 nz2 = n2 - nz * (nx2 - 1) ndx = nx2 - nx1 ndy = nz2 - nz1 gxx = grn(1,ndx,ndy) gyy = grn(2,ndx,ndy) gxy = grn(3,ndx,ndy) balance(n1,1) = balance(n1,1) + (force(n2,1) * gxx + force(n2,2) * gxy) * h1 balance(n1,2) = balance(n1,2) + (force(n2,1) * gxy + force(n2,2) * gyy)*h1 end do end do The programmer has written this loop well—there are no loop invariant operations with respect to n1 and n2. However, the loop resides within an iterative loop over time and the index calculations are independent with respect to time. Trading space for time, I precomputed the index values prior to the entering the time loop and stored the values in two arrays. I then replaced the index calculations with reads of the arrays. Data operations Ways to reduce data operations can appear in many forms. Implementing a more efficient algorithm produces the biggest gains. The closest I came to an algorithm change was in code 4. This code computes the inner product of K-vectors A(i) and B(j), 0 = i < N, 0 = j < M, for most values of i and j. Since the program computes most of the NM possible inner products, it is more efficient to compute all the inner products in one triply-nested loop rather than one at a time when needed. The savings accrue from reading A(i) once for all B(j) vectors and from loop unrolling. for (i = 0; i < N; i+=8) { for (j = 0; j < M; j++) { sum0 = 0.0; sum1 = 0.0; sum2 = 0.0; sum3 = 0.0; sum4 = 0.0; sum5 = 0.0; sum6 = 0.0; sum7 = 0.0; for (k = 0; k < K; k++) { sum0 += A[i+0][k] * B[j][k]; sum1 += A[i+1][k] * B[j][k]; sum2 += A[i+2][k] * B[j][k]; sum3 += A[i+3][k] * B[j][k]; sum4 += A[i+4][k] * B[j][k]; sum5 += A[i+5][k] * B[j][k]; sum6 += A[i+6][k] * B[j][k]; sum7 += A[i+7][k] * B[j][k]; } C[i+0][j] = sum0; C[i+1][j] = sum1; C[i+2][j] = sum2; C[i+3][j] = sum3; C[i+4][j] = sum4; C[i+5][j] = sum5; C[i+6][j] = sum6; C[i+7][j] = sum7; }} This change requires knowledge of a typical run; i.e., that most inner products are computed. The reasons for the change, however, derive from basic optimization concepts. It is the type of change easily made at development time by a knowledgeable programmer. In code 5, we have the data version of the index optimization in code 6. Here a very expensive computation is a function of the loop indices and so cannot be hoisted out of the loop; however, the computation is invariant with respect to an outer iterative loop over time. We can compute its value for each iteration of the computation loop prior to entering the time loop and save the values in an array. The increase in memory required to store the values is small in comparison to the large savings in time. The main loop in Code 8 is doubly nested. The inner loop includes a series of guarded computations; some are a function of the inner loop index but not the outer loop index while others are a function of the outer loop index but not the inner loop index for (j = 0; j < N; j++) { for (i = 0; i < M; i++) { r = i * hrmax; R = A[j]; temp = (PRM[3] == 0.0) ? 1.0 : pow(r, PRM[3]); high = temp * kcoeff * B[j] * PRM[2] * PRM[4]; low = high * PRM[6] * PRM[6] / (1.0 + pow(PRM[4] * PRM[6], 2.0)); kap = (R > PRM[6]) ? high * R * R / (1.0 + pow(PRM[4]*r, 2.0) : low * pow(R/PRM[6], PRM[5]); < rest of loop omitted > }} Note that the value of temp is invariant to j. Thus, we can hoist the computation for temp out of the loop and save its values in an array. for (i = 0; i < M; i++) { r = i * hrmax; TEMP[i] = pow(r, PRM[3]); } [N.B. – the case for PRM[3] = 0 is omitted and will be reintroduced later.] We now hoist out of the inner loop the computations invariant to i. Since the conditional guarding the value of kap is invariant to i, it behooves us to hoist the computation out of the inner loop, thereby executing the guard once rather than M times. The final version of the code is for (j = 0; j < N; j++) { R = rig[j] / 1000.; tmp1 = kcoeff * par[2] * beta[j] * par[4]; tmp2 = 1.0 + (par[4] * par[4] * par[6] * par[6]); tmp3 = 1.0 + (par[4] * par[4] * R * R); tmp4 = par[6] * par[6] / tmp2; tmp5 = R * R / tmp3; tmp6 = pow(R / par[6], par[5]); if ((par[3] == 0.0) && (R > par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * tmp5; } else if ((par[3] == 0.0) && (R <= par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * tmp4 * tmp6; } else if ((par[3] != 0.0) && (R > par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * TEMP[i] * tmp5; } else if ((par[3] != 0.0) && (R <= par[6])) { for (i = 1; i <= imax1; i++) KAP[i] = tmp1 * TEMP[i] * tmp4 * tmp6; } for (i = 0; i < M; i++) { kap = KAP[i]; r = i * hrmax; < rest of loop omitted > } } Maybe not the prettiest piece of code, but certainly much more efficient than the original loop, Copy operations Several programs unnecessarily copy data from one data structure to another. This problem occurs in both Fortran and C programs, although it manifests itself differently in the two languages. Code 1 declares two arrays—one for old values and one for new values. At the end of each iteration, the array of new values is copied to the array of old values to reset the data structures for the next iteration. This problem occurs in Fortran programs not included in this study and in both Fortran 77 and Fortran 90 code. Introducing pointers to the arrays and swapping pointer values is an obvious way to eliminate the copying; but pointers is not a feature that many Fortran programmers know well or are comfortable using. An easy solution not involving pointers is to extend the dimension of the value array by 1 and use the last dimension to differentiate between arrays at different times. For example, if the data space is N x N, declare the array (N, N, 2). Then store the problem’s initial values in (_, _, 2) and define the scalar names new = 2 and old = 1. At the start of each iteration, swap old and new to reset the arrays. The old–new copy problem did not appear in any C program. In programs that had new and old values, the code swapped pointers to reset data structures. Where unnecessary coping did occur is in structure assignment and parameter passing. Structures in C are handled much like scalars. Assignment causes the data space of the right-hand name to be copied to the data space of the left-hand name. Similarly, when a structure is passed to a function, the data space of the actual parameter is copied to the data space of the formal parameter. If the structure is large and the assignment or function call is in an inner loop, then copying costs can grow quite large. While none of the ten programs considered here manifested this problem, it did occur in programs not included in the study. A simple fix is always to refer to structures via pointers. Optimizing loop structures Since scientific programs spend almost all their time in loops, efficient loops are the key to good performance. Conditionals, function calls, little instruction level parallelism, and large numbers of temporary values make it difficult for the compiler to generate tightly packed, highly efficient code. Conditionals and function calls introduce jumps that disrupt code flow. Users should eliminate or isolate conditionls to their own loops as much as possible. Often logical expressions can be substituted for if-then-else statements. For example, code 2 includes the following snippet MaxDelta = 0.0 do J = 1, N do I = 1, M < code omitted > Delta = abs(OldValue ? NewValue) if (Delta > MaxDelta) MaxDelta = Delta enddo enddo if (MaxDelta .gt. 0.001) goto 200 Since the only use of MaxDelta is to control the jump to 200 and all that matters is whether or not it is greater than 0.001, I made MaxDelta a boolean and rewrote the snippet as MaxDelta = .false. do J = 1, N do I = 1, M < code omitted > Delta = abs(OldValue ? NewValue) MaxDelta = MaxDelta .or. (Delta .gt. 0.001) enddo enddo if (MaxDelta) goto 200 thereby, eliminating the conditional expression from the inner loop. A microprocessor can execute many instructions per instruction cycle. Typically, it can execute one or more memory, floating point, integer, and jump operations. To be executed simultaneously, the operations must be independent. Thick loops tend to have more instruction level parallelism than thin loops. Moreover, they reduce memory traffice by maximizing data reuse. Loop unrolling and loop fusion are two techniques to increase the size of loop bodies. Several of the codes studied benefitted from loop unrolling, but none benefitted from loop fusion. This observation is not too surpising since it is the general tendency of programmers to write thick loops. As loops become thicker, the number of temporary values grows, increasing register pressure. If registers spill, then memory traffic increases and code flow is disrupted. A thick loop with many temporary values may execute slower than an equivalent series of thin loops. The biggest gain will be achieved if the thick loop can be split into a series of independent loops eliminating the need to write and read temporary arrays. I found such an occasion in code 10 where I split the loop do i = 1, n do j = 1, m A24(j,i)= S24(j,i) * T24(j,i) + S25(j,i) * U25(j,i) B24(j,i)= S24(j,i) * T25(j,i) + S25(j,i) * U24(j,i) A25(j,i)= S24(j,i) * C24(j,i) + S25(j,i) * V24(j,i) B25(j,i)= S24(j,i) * U25(j,i) + S25(j,i) * V25(j,i) C24(j,i)= S26(j,i) * T26(j,i) + S27(j,i) * U26(j,i) D24(j,i)= S26(j,i) * T27(j,i) + S27(j,i) * V26(j,i) C25(j,i)= S27(j,i) * S28(j,i) + S26(j,i) * U28(j,i) D25(j,i)= S27(j,i) * T28(j,i) + S26(j,i) * V28(j,i) end do end do into two disjoint loops do i = 1, n do j = 1, m A24(j,i)= S24(j,i) * T24(j,i) + S25(j,i) * U25(j,i) B24(j,i)= S24(j,i) * T25(j,i) + S25(j,i) * U24(j,i) A25(j,i)= S24(j,i) * C24(j,i) + S25(j,i) * V24(j,i) B25(j,i)= S24(j,i) * U25(j,i) + S25(j,i) * V25(j,i) end do end do do i = 1, n do j = 1, m C24(j,i)= S26(j,i) * T26(j,i) + S27(j,i) * U26(j,i) D24(j,i)= S26(j,i) * T27(j,i) + S27(j,i) * V26(j,i) C25(j,i)= S27(j,i) * S28(j,i) + S26(j,i) * U28(j,i) D25(j,i)= S27(j,i) * T28(j,i) + S26(j,i) * V28(j,i) end do end do Conclusions Over the course of the last year, I have had the opportunity to work with over two dozen academic scientific programmers at leading research universities. Their research interests span a broad range of scientific fields. Except for two programs that relied almost exclusively on library routines (matrix multiply and fast Fourier transform), I was able to improve significantly the single processor performance of all codes. Improvements range from 2x to 15.5x with a simple average of 4.75x. Changes to the source code were at a very high level. I did not use sophisticated techniques or programming tools to discover inefficiencies or effect the changes. Only one code was parallel despite the availability of parallel systems to all developers. Clearly, we have a problem—personal scientific research codes are highly inefficient and not running parallel. The developers are unaware of simple optimization techniques to make programs run faster. They lack education in the art of code optimization and parallel programming. I do not believe we can fix the problem by publishing additional books or training manuals. To date, the developers in questions have not studied the books or manual available, and are unlikely to do so in the future. Short courses are a possible solution, but I believe they are too concentrated to be much use. The general concepts can be taught in a three or four day course, but that is not enough time for students to practice what they learn and acquire the experience to apply and extend the concepts to their codes. Practice is the key to becoming proficient at optimization. I recommend that graduate students be required to take a semester length course in optimization and parallel programming. We would never give someone access to state-of-the-art scientific equipment costing hundreds of thousands of dollars without first requiring them to demonstrate that they know how to use the equipment. Yet the criterion for time on state-of-the-art supercomputers is at most an interesting project. Requestors are never asked to demonstrate that they know how to use the system, or can use the system effectively. A semester course would teach them the required skills. Government agencies that fund academic scientific research pay for most of the computer systems supporting scientific research as well as the development of most personal scientific codes. These agencies should require graduate schools to offer a course in optimization and parallel programming as a requirement for funding. About the Author John Feo received his Ph.D. in Computer Science from The University of Texas at Austin in 1986. After graduate school, Dr. Feo worked at Lawrence Livermore National Laboratory where he was the Group Leader of the Computer Research Group and principal investigator of the Sisal Language Project. In 1997, Dr. Feo joined Tera Computer Company where he was project manager for the MTA, and oversaw the programming and evaluation of the MTA at the San Diego Supercomputer Center. In 2000, Dr. Feo joined Sun Microsystems as an HPC application specialist. He works with university research groups to optimize and parallelize scientific codes. Dr. Feo has published over two dozen research articles in the areas of parallel parallel programming, parallel programming languages, and application performance.

    Read the article

  • Jframe using multiple classes?

    - by user2945880
    and im trying to make it so it can show multiple classes at once Jframe: import javax.swing.JFrame; import java.awt.BorderLayout; public class Concert { public static void main(String[] args) { JFrame frame = new JFrame(); frame.setSize(1000, 800); frame.setTitle("Concert!"); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); Concertbackground component = new Concertbackground(); BandComponent component1 = new BandComponent(); frame.add(component, BorderLayout.NORTH); frame.add(component1, BorderLayout.CENTER); frame.setVisible(true); } } These are the two classes mentioned in the Jframe: import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Rectangle; import java.awt.geom.Ellipse2D; import java.awt.geom.Line2D; import javax.swing.JComponent; import java.awt.Polygon; /* BandComponent.java Justin Walker 10/27/13 */ public class BandComponent extends JComponent { public void paintComponent(Graphics g) { // Recover Graphics2D Graphics2D g2 = (Graphics2D) g; int xScale = 250; int yScale = 100; int x = 343; int y = 343; //singer Polygon sing = new Polygon(); sing.addPoint(667 ,208 + xScale); sing.addPoint(676,213 + xScale); sing.addPoint(678,217 + xScale); sing.addPoint(682,221 + xScale); sing.addPoint(681,224 + xScale); sing.addPoint(680,231 + xScale); sing.addPoint(676,242 + xScale); sing.addPoint(672,244 + xScale); sing.addPoint(672,250 + xScale); sing.addPoint(682,248 + xScale); sing.addPoint(713,244 + xScale); sing.addPoint(734,247 + xScale); sing.addPoint(750,247 + xScale); sing.addPoint(794,232 + xScale); sing.addPoint(800,231 + xScale); sing.addPoint(801,223 + xScale); sing.addPoint(807,219 + xScale); sing.addPoint(806,221 + xScale); sing.addPoint(806,229 + xScale); sing.addPoint(818,222 + xScale); sing.addPoint(820,223 + xScale); sing.addPoint(825,227 + xScale); sing.addPoint(825,240 + xScale); sing.addPoint(817,243 + xScale); sing.addPoint(807,245 + xScale); sing.addPoint(803,247 + xScale); sing.addPoint(801,252 + xScale); sing.addPoint(781,257 + xScale); sing.addPoint(762,264 + xScale); sing.addPoint(734,271 + xScale); sing.addPoint(701,286 + xScale); sing.addPoint(691,296 + xScale); sing.addPoint(693,311 + xScale); sing.addPoint(690,317 + xScale); sing.addPoint(690,335 + xScale); sing.addPoint(691,339 + xScale); sing.addPoint(689,343 + xScale); sing.addPoint(712,382 + xScale); sing.addPoint(725,400 + xScale); sing.addPoint(731,418 + xScale); sing.addPoint(731,428 + xScale); sing.addPoint(738,454 + xScale); sing.addPoint(741,460 + xScale); sing.addPoint(746,468 + xScale); sing.addPoint(766,468 + xScale); sing.addPoint(771,481 + xScale);// sing.addPoint(723,482 + xScale); sing.addPoint(720,462 + xScale); sing.addPoint(718,454 + xScale); sing.addPoint(709,436 + xScale); sing.addPoint(703,436 + xScale); sing.addPoint(699,417 + xScale); sing.addPoint(686,396 + xScale); sing.addPoint(678,395 + xScale); sing.addPoint(676,437 + xScale); sing.addPoint(673,439 + xScale); sing.addPoint(638,435 + xScale); sing.addPoint(640,398 + xScale); sing.addPoint(634,410 + xScale); sing.addPoint(625,416 + xScale); sing.addPoint(622,436 + xScale); sing.addPoint(622,443 + xScale); sing.addPoint(615,447 + xScale); sing.addPoint(609,456 + xScale); sing.addPoint(606,481 + xScale);// sing.addPoint(557,481 + xScale); sing.addPoint(560,467 + xScale); sing.addPoint(579,467 + xScale); sing.addPoint(587,464 + xScale); sing.addPoint(593,452 + xScale); sing.addPoint(594,441 + xScale); sing.addPoint(592,434 + xScale); sing.addPoint(600,416 + xScale); sing.addPoint(608,405 + xScale); sing.addPoint(609,394 + xScale); sing.addPoint(617,376 + xScale); sing.addPoint(619,363 + xScale); sing.addPoint(632,334 + xScale); sing.addPoint(637,324 + xScale); sing.addPoint(635,314 + xScale); sing.addPoint(639,296 + xScale); sing.addPoint(627,285 + xScale); sing.addPoint(600,279 + xScale); sing.addPoint(582,278 + xScale); sing.addPoint(575,275 + xScale); sing.addPoint(546,256 + xScale); sing.addPoint(536,252 + xScale); sing.addPoint(533,350 + xScale); sing.addPoint(534,361 + xScale); sing.addPoint(532,367 + xScale); sing.addPoint(529,369 + xScale); sing.addPoint(524,363 + xScale); sing.addPoint(525,355 + xScale); sing.addPoint(531,254 + xScale); sing.addPoint(527,249 + xScale); sing.addPoint(527,242 + xScale); sing.addPoint(529,237 + xScale); sing.addPoint(532,237 + xScale); sing.addPoint(536,178 + xScale); sing.addPoint(534,129 + xScale); sing.addPoint(535,123 + xScale); sing.addPoint(541,120 + xScale); sing.addPoint(545,123 + xScale); sing.addPoint(547,131 + xScale); sing.addPoint(545,173 + xScale); sing.addPoint(538,233 + xScale); sing.addPoint(549,239 + xScale); sing.addPoint(558,241 + xScale); sing.addPoint(585,257 + xScale); sing.addPoint(599,257 + xScale); sing.addPoint(627,254 + xScale); sing.addPoint(647,251 + xScale); sing.addPoint(653,248 + xScale); sing.addPoint(652,235 + xScale); sing.addPoint(648,226 + xScale); sing.addPoint(652,218 + xScale); sing.addPoint(661,212 + xScale); g2.setColor(Color.black); g2.fill(sing); g2.draw(sing); //guitar Polygon guitar = new Polygon(); guitar.addPoint(148,28); guitar.addPoint(158,32); guitar.addPoint(164,38); guitar.addPoint(168,46); guitar.addPoint(169,52); guitar.addPoint(167,60); guitar.addPoint(164,65); guitar.addPoint(165,70); guitar.addPoint(161,76); guitar.addPoint(158,92); guitar.addPoint(162,97); guitar.addPoint(161,102); guitar.addPoint(158,106); guitar.addPoint(155,108); guitar.addPoint(151,127); guitar.addPoint(152,133); guitar.addPoint(155,137); guitar.addPoint(151,146); guitar.addPoint(153,147); guitar.addPoint(160,142); guitar.addPoint(162,133); guitar.addPoint(162,123); guitar.addPoint(161,113); guitar.addPoint(162,110); guitar.addPoint(164,117); guitar.addPoint(169,131); guitar.addPoint(171,144); guitar.addPoint(170,159); guitar.addPoint(166,167); guitar.addPoint(166,171); guitar.addPoint(174,174); guitar.addPoint(183,184); guitar.addPoint(191,195); guitar.addPoint(196,198); guitar.addPoint(198,200); guitar.addPoint(199,210); guitar.addPoint(211,225); guitar.addPoint(212,233); guitar.addPoint(220,248); guitar.addPoint(233,260); guitar.addPoint(245,266); guitar.addPoint(248,268); guitar.addPoint(249,277); guitar.addPoint(205,275); guitar.addPoint(204,262); guitar.addPoint(187,238); guitar.addPoint(178,224); guitar.addPoint(177,216); guitar.addPoint(156,201); guitar.addPoint(146,197); guitar.addPoint(134,211); guitar.addPoint(128,229); guitar.addPoint(125,244);// guitar.addPoint(121,246); guitar.addPoint(107,248); guitar.addPoint(100,252); guitar.addPoint(97,258); guitar.addPoint(96,253); guitar.addPoint(89,258); guitar.addPoint(65,267); guitar.addPoint(63,274); guitar.addPoint(64,283); guitar.addPoint(41,282); guitar.addPoint(44,270); guitar.addPoint(47,264); guitar.addPoint(51,255); guitar.addPoint(73,238); guitar.addPoint(79,228); guitar.addPoint(97,222); guitar.addPoint(101,204); guitar.addPoint(102,181); guitar.addPoint(100,170); guitar.addPoint(95,161); guitar.addPoint(97,154); guitar.addPoint(91,152); guitar.addPoint(77,131); guitar.addPoint(65,123); guitar.addPoint(61,105); guitar.addPoint(64,94); guitar.addPoint(72,91); guitar.addPoint(78,82); guitar.addPoint(78,76); guitar.addPoint(70,73); guitar.addPoint(70,67); guitar.addPoint(93,51); guitar.addPoint(101,48); guitar.addPoint(111,52); guitar.addPoint(118,59); guitar.addPoint(119,70); guitar.addPoint(117,78); guitar.addPoint(113,79); guitar.addPoint(112,86); guitar.addPoint(111,88); guitar.addPoint(109,89); guitar.addPoint(109,92); guitar.addPoint(122,99);// guitar.addPoint(124,99); guitar.addPoint(133,96); guitar.addPoint(145,93); //guitar.addPoint(138,124); guitar.addPoint(150,69); guitar.addPoint(150,62); guitar.addPoint(155,58); guitar.addPoint(154,53); guitar.addPoint(149,50); guitar.addPoint(154,46); guitar.addPoint(153,38); guitar.addPoint(147,28); g2.setColor(Color.black); g2.fill(guitar); g2.draw(guitar); Polygon guitar2 = new Polygon (); guitar2.addPoint(141,108); guitar2.addPoint(139,126); guitar2.addPoint(135,122); guitar2.addPoint(128,122); guitar2.addPoint(129,116); guitar2.addPoint(143,108); g2.setColor(Color.white); g2.fill(guitar2); g2.draw(guitar2); //bass guitar Polygon bassgt = new Polygon (); bassgt.addPoint(871,21); bassgt.addPoint(879,24); bassgt.addPoint(885,32); bassgt.addPoint(886,42); bassgt.addPoint(895,47); bassgt.addPoint(904,56); bassgt.addPoint(907,69); bassgt.addPoint(909,83); bassgt.addPoint(910,91); bassgt.addPoint(941,81); bassgt.addPoint(946,75); bassgt.addPoint(945,67); bassgt.addPoint(950,67); bassgt.addPoint(955,75); bassgt.addPoint(960,68); bassgt.addPoint(963,74); bassgt.addPoint(967,72); bassgt.addPoint(971,66); bassgt.addPoint(973,70); bassgt.addPoint(981,67); bassgt.addPoint(984,71); bassgt.addPoint(982,76); bassgt.addPoint(987,80); bassgt.addPoint(986,82); bassgt.addPoint(980,83); bassgt.addPoint(979,90); bassgt.addPoint(974,85); bassgt.addPoint(970,86); bassgt.addPoint(973,91); bassgt.addPoint(965,86); bassgt.addPoint(960,90); bassgt.addPoint(961,100); bassgt.addPoint(955,92); bassgt.addPoint(944,91); bassgt.addPoint(907,103); bassgt.addPoint(906,109); bassgt.addPoint(893,114); bassgt.addPoint(895,123); bassgt.addPoint(900,131); bassgt.addPoint(904,134); bassgt.addPoint(908,145); bassgt.addPoint(911,159); bassgt.addPoint(918,171); bassgt.addPoint(919,190); bassgt.addPoint(923,198); bassgt.addPoint(919,201); bassgt.addPoint(919,210); bassgt.addPoint(927,220); bassgt.addPoint(942,226); bassgt.addPoint(944,234); bassgt.addPoint(909,230); bassgt.addPoint(905,214); bassgt.addPoint(899,204); bassgt.addPoint(893,203); bassgt.addPoint(889,171); bassgt.addPoint(877,151); bassgt.addPoint(861,152); bassgt.addPoint(852,169); bassgt.addPoint(849,203); bassgt.addPoint(841,210); bassgt.addPoint(840,228); bassgt.addPoint(828,233); bassgt.addPoint(806,235); bassgt.addPoint(805,228); bassgt.addPoint(822,219); bassgt.addPoint(824,204); bassgt.addPoint(817,201); bassgt.addPoint(822,196); bassgt.addPoint(822,184); bassgt.addPoint(828,162); bassgt.addPoint(829,152); bassgt.addPoint(820,149); bassgt.addPoint(811,144); bassgt.addPoint(806,134); bassgt.addPoint(805,117); bassgt.addPoint(820,107); bassgt.addPoint(819,89); bassgt.addPoint(811,83); bassgt.addPoint(811,77); bassgt.addPoint(824,66); bassgt.addPoint(825,61); bassgt.addPoint(842,53); bassgt.addPoint(852,43); bassgt.addPoint(853,29); bassgt.addPoint(870,20); g2.setColor(Color.black); g2.fill(bassgt); g2.draw(bassgt); Polygon bassgt2 = new Polygon(); bassgt2.addPoint(845,78); bassgt2.addPoint(845,98); bassgt2.addPoint(843,98); bassgt2.addPoint(842,105); bassgt2.addPoint(839,109); bassgt2.addPoint(834,103); bassgt2.addPoint(832,85); bassgt2.addPoint(845,78); g2.setColor(Color.white); g2.fill(bassgt2); g2.draw(bassgt2); Polygon drums = new Polygon (); drums.addPoint(713,104); drums.addPoint(706,121); drums.addPoint(721,377); drums.addPoint(248,380); drums.addPoint(253,228); drums.addPoint(250,206); drums.addPoint(237,178); drums.addPoint(206,166); drums.addPoint(201,154); drums.addPoint(198,152); drums.addPoint(208,148); drums.addPoint(236,150); drums.addPoint(247,130); drums.addPoint(227,119); drums.addPoint(219,105); drums.addPoint(222,96); drums.addPoint(233,88); drums.addPoint(251,84); drums.addPoint(272,83); drums.addPoint(300,91); drums.addPoint(285,72); drums.addPoint(294,57); drums.addPoint(319,46); drums.addPoint(372,45); drums.addPoint(406,50); drums.addPoint(428,65); drums.addPoint(433,74); drums.addPoint(450,58); drums.addPoint(478,48); drums.addPoint(514,48); drums.addPoint(544,51); drums.addPoint(566,52); drums.addPoint(577,67); drums.addPoint(575,79); drums.addPoint(561,95); drums.addPoint(545,98); drums.addPoint(525,105); drums.addPoint(524,147); drums.addPoint(524,183); drums.addPoint(645,175); drums.addPoint(662,143); drums.addPoint(617,152); drums.addPoint(608,148); drums.addPoint(614,139); drums.addPoint(633,128); drums.addPoint(661,116); drums.addPoint(659,107); drums.addPoint(625,114); drums.addPoint(592,113); drums.addPoint(571,111); drums.addPoint(565,102); drums.addPoint(576,86); drums.addPoint(616,70); drums.addPoint(647,66); drums.addPoint(679,67); drums.addPoint(695,72); drums.addPoint(699,90); drums.addPoint(678,100); drums.addPoint(667,103); drums.addPoint(672,113); drums.addPoint(689,105); drums.addPoint(709,106); g2.setColor(Color.black); g2.fill(drums); g2.draw(drums); } } The second class: import java.awt.Color; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.Rectangle; import java.awt.geom.Ellipse2D; import java.awt.geom.Line2D; import javax.swing.JComponent; import java.awt.GradientPaint; /* component that draws the concert background */ public class Concertbackground extends JComponent { public void paintComponent(Graphics g) { super.paintComponent(g); // Recover Graphics2D Graphics2D g2 = (Graphics2D) g; //Background Top g2.setColor(Color.BLUE); Rectangle backgroundTop = new Rectangle (0, 0, getWidth(), getHeight() / 4); g2.fill(backgroundTop); // Background bottom g2.setColor(Color.GREEN); Rectangle backgroundBottom = new Rectangle (0, getHeight() / 2, getWidth(), getHeight() / 2); g2.fill(backgroundBottom); // Speaker base g2.setColor(Color.BLACK); Rectangle base = new Rectangle (0, 0, 50, 100); g2.fill(base); // Speakers circles gray top g2.setColor(Color.DARK_GRAY); Ellipse2D.Double speakerTop = new Ellipse2D.Double(10, 10, 30, 30); g2.fill(speakerTop); //speakers circles black top g2.setColor(Color.BLACK); Ellipse2D.Double speakerTop1 = new Ellipse2D.Double(15, 15, 20, 20); g2.fill(speakerTop1); // Speakers circles gray bottom g2.setColor(Color.DARK_GRAY); Ellipse2D.Double speakerBottom = new Ellipse2D.Double(10, 50, 30, 30); g2.fill(speakerBottom); //speakers circles black bottom g2.setColor(Color.BLACK); Ellipse2D.Double speakerBottom1 = new Ellipse2D.Double(15, 55, 20, 20); g2.fill(speakerBottom1); } } My main question is how do I change my Jframe so it can use as many classes as I want, It cant be the size of my classes because they were used with the same 1000, 800 Jframe to make the classes. I also need to be able to add more than just these two classes to my Jframe.

    Read the article

  • Javascript or CSS hover not working in Safari and Chrome

    - by PAZtech
    I have a problem with a script for a image gallery. The problem seems to only occur on Safari and Chrome, but if I refresh the page I get it to work correctly - weird! Correct function: The gallery has a top bar, which if you hover over it, it will display a caption. Below sits the main image. At the bottom there is another bar that is a reversal of the top bar. When you hover over it, it will display thumbnails of the gallery. The problem: In Safari and Chrome, the thumbnail holder will not display. In fact, it doesn't even show it as an active item (or a rollover). But oddly enough, if you manually refresh the page it begins to work correctly for the rest of the time you view the page. Once you have left the page and return the same error occurs again and you have to go through the same process. Here's one of the pages to look at: link text Here's the CSS: #ThumbsGutter { background: url(../Images/1x1.gif); background: url(/Images/1x1.gif); height: 105px; left: 0px; position: absolute; top: 0px; width: 754px; z-index: 2; } #ThumbsHolder { display: none; } #ThumbsTable { left: 1px; } #Thumbs { background-color: #000; width: 703px; } #Thumbs ul { list-style: none; margin: 0; padding: 0; } #Thumbs ul li { display: inline; } .Thumbs ul li a { border-right: 1px solid #fff; border-top: 1px solid #fff; float: left; left: 1px; } .Thumbs ul li a img { filter: alpha(opacity=50); height: 104px; opacity: .5; width: 140px; } .Thumbs ul li a img.Hot { filter: alpha(opacity=100); opacity: 1; } Here is the javascript: //Variables var globalPath = ""; var imgMain; var gutter; var holder; var thumbs; var loadingImage; var holderState; var imgCount; var imgLoaded; var captionHolder; var captionState = 0; var captionHideTimer; var captionHideTime = 500; var thumbsHideTimer; var thumbsHideTime = 500; $(document).ready(function() { //Load Variables imgMain = $("#MainImage"); captionHolder = $("#CaptionHolder"); gutter = $("#ThumbsGutter"); holder = $("#ThumbsHolder"); thumbs = $("#Thumbs"); loadingImage = $("#LoadingImageHolder"); //Position Loading Image loadingImage.centerOnObject(imgMain); //Caption Tab Event Handlers $("#CaptionTab").mouseover(function() { clearCaptionHideTimer(); showCaption(); }).mouseout(function() { setCaptionHideTimer(); }); //Caption Holder Event Handlers captionHolder.mouseenter(function() { clearCaptionHideTimer(); }).mouseleave(function() { setCaptionHideTimer(); }); //Position Gutter if (jQuery.browser.safari) { gutter.css("left", imgMain.position().left + "px").css("top", ((imgMain.offset().top + imgMain.height()) - 89) + "px"); } else { gutter.css("left", imgMain.position().left + "px").css("top", ((imgMain.offset().top + imgMain.height()) - 105) + "px"); } //gutter.css("left", imgMain.position().left + "px").css("top", ((imgMain.offset().top + imgMain.height()) - 105) + "px"); //gutter.css("left", imgMain.offset().left + "px").css("top", ((imgMain.offset().top + imgMain.height()) - gutter.height()) + "px"); //Thumb Tab Event Handlers $("#ThumbTab").mouseover(function() { clearThumbsHideTimer(); showThumbs(); }).mouseout(function() { setThumbsHideTimer(); }); //Gutter Event Handlers gutter.mouseenter(function() { //showThumbs(); clearThumbsHideTimer(); }).mouseleave(function() { //hideThumbs(); setThumbsHideTimer(); }); //Next/Prev Button Event Handlers $("#btnPrev").mouseover(function() { $(this).attr("src", globalPath + "/Images/GalleryLeftButtonHot.jpg"); }).mouseout(function() { $(this).attr("src", globalPath + "/Images/GalleryLeftButton.jpg"); }); $("#btnNext").mouseover(function() { $(this).attr("src", globalPath + "/Images/GalleryRightButtonHot.jpg"); }).mouseout(function() { $(this).attr("src", globalPath + "/Images/GalleryRightButton.jpg"); }); //Load Gallery //loadGallery(1); }); function loadGallery(galleryID) { //Hide Holder holderState = 0; holder.css("display", "none"); //Hide Empty Gallery Text $("#EmptyGalleryText").css("display", "none"); //Show Loading Message $("#LoadingGalleryOverlay").css("display", "inline").centerOnObject(imgMain); $("#LoadingGalleryText").css("display", "inline").centerOnObject(imgMain); //Load Thumbs thumbs.load(globalPath + "/GetGallery.aspx", { GID: galleryID }, function() { $("#TitleHolder").html($("#TitleContainer").html()); $("#DescriptionHolder").html($("#DescriptionContainer").html()); imgCount = $("#Thumbs img").length; imgLoaded = 0; if (imgCount == 0) { $("#LoadingGalleryText").css("display", "none"); $("#EmptyGalleryText").css("display", "inline").centerOnObject(imgMain); } else { $("#Thumbs img").load(function() { imgLoaded++; if (imgLoaded == imgCount) { holder.css("display", "inline"); //Carousel Thumbs thumbs.jCarouselLite({ btnNext: "#btnNext", btnPrev: "#btnPrev", mouseWheel: true, scroll: 1, visible: 5 }); //Small Image Event Handlers $("#Thumbs img").each(function(i) { $(this).mouseover(function() { $(this).addClass("Hot"); }).mouseout(function() { $(this).removeClass("Hot"); }).click(function() { //Load Big Image setImage($(this)); }); }); holder.css("display", "none"); //Load First Image var img = new Image(); img.onload = function() { imgMain.attr("src", img.src); setCaption($("#Image1").attr("alt")); //Hide Loading Message $("#LoadingGalleryText").css("display", "none"); $("#LoadingGalleryOverlay").css("display", "none"); } img.src = $("#Image1").attr("bigimg"); } }); } }); } function showCaption() { if (captionState == 0) { $("#CaptionTab").attr("src", globalPath + "/Images/CaptionTabHot.jpg"); captionHolder.css("display", "inline").css("left", imgMain.position().left + "px").css("top", imgMain.position().top + "px").css("width", imgMain.width() + "px").effect("slide", { "direction": "up" }, 500, function() { captionState = 1; }); } } function hideCaption() { if (captionState == 1) { captionHolder.toggle("slide", { "direction": "up" }, 500, function() { $("#CaptionTab").attr("src", globalPath + "/Images/CaptionTab.jpg"); captionState = 0; }); } } function setCaptionHideTimer() { captionHideTimer = window.setTimeout(hideCaption,captionHideTime); } function clearCaptionHideTimer() { if(captionHideTimer) { window.clearTimeout(captionHideTimer); captionHideTimer = null; } } function showThumbs() { if (holderState == 0) { $("#ThumbTab").attr("src", globalPath + "/Images/ThumbTabHot.jpg"); holder.effect("slide", { "direction": "down" }, 500, function() { holderState = 1; }); } } function hideThumbs() { if (holderState == 1) { if (jQuery.browser.safari) { holder.css("display", "none"); $("#ThumbTab").attr("src", globalPath + "/Images/ThumbTab.jpg"); holderState = 0; } else { holder.toggle("slide", { "direction": "down" }, 500, function() { $("#ThumbTab").attr("src", globalPath + "/Images/ThumbTab.jpg"); holderState = 0; }); } } } function setThumbsHideTimer() { thumbsHideTimer = window.setTimeout(hideThumbs,thumbsHideTime); } function clearThumbsHideTimer() { if(thumbsHideTimer) { window.clearTimeout(thumbsHideTimer); thumbsHideTimer = null; } } function setImage(image) { //Show Loading Image loadingImage.css("display", "inline"); var img = new Image(); img.onload = function() { //imgMain.css("background","url(" + img.src + ")").css("display","none").fadeIn(250); imgMain.attr("src", img.src).css("display", "none").fadeIn(250); setCaption(image.attr("alt")); //Hide Loading Image loadingImage.css("display", "none"); }; img.src = image.attr("bigimg"); } function setCaption(caption) { $("#CaptionText").html(caption); //alert($("#CaptionText").html()); /* if (caption.length 0) { $("#CaptionText") .css("display", "inline") .css("left", imgMain.position().left + "px") .css("top", imgMain.position().top + "px") .css("width", imgMain.width() + "px") .html(caption); $("#CaptionOverlay").css("display", "inline") .css("height", $("#CaptionText").height() + 36 + "px") .css("left", imgMain.position().left + "px") .css("top", imgMain.position().top + "px") .css("width", imgMain.width() + "px"); } else { $("#CaptionText").css("display", "none"); $("#CaptionOverlay").css("display", "none"); } */ } Please if anyone could help, it would be greatly appreciated! Thanks in advance. Justin

    Read the article

  • Windows-1251 file inside UTF-8 site?

    - by Spoonk
    Hello everyone Masters Of Web Delevopment :) I have a piece of PHP script that fetches last 10 played songs from my winamp. This script is inside file (lets call it "lastplayed.php") which is included in my site with php include function inside a "div". My site is on UTF-8 encoding. The problem is that some songs titles are in Windows-1251 encoding. And in my site they displays like "??????"... Is there any known way to tell to this div with included "lastplayed.php" in it, to be with windows-1251 encoding? Or any other suggestions? P.S: The file with fetching script a.k.a. "lastplayed.php", is converted to UTF-8. But if it is ANCII it's the same result. I try to put and meta tag with windows-1251 between head tag but nothing happens again. P.P.S: Script that fetches the Winamp's data (lastplayed.php): <?php /****** * You may use and/or modify this script as long as you: * 1. Keep my name & webpage mentioned * 2. Don't use it for commercial purposes * * If you want to use this script without complying to the rules above, please contact me first at: [email protected] * * Author: Martijn Korse * Website: http://devshed.excudo.net * * Date: 08-05-2006 ***/ /** * version 2.0 */ class Radio { var $fields = array(); var $fieldsDefaults = array("Server Status", "Stream Status", "Listener Peak", "Average Listen Time", "Stream Title", "Content Type", "Stream Genre", "Stream URL", "Current Song"); var $very_first_str; var $domain, $port, $path; var $errno, $errstr; var $trackLists = array(); var $isShoutcast; var $nonShoutcastData = array( "Server Status" => "n/a", "Stream Status" => "n/a", "Listener Peak" => "n/a", "Average Listen Time" => "n/a", "Stream Title" => "n/a", "Content Type" => "n/a", "Stream Genre" => "n/a", "Stream URL" => "n/a", "Stream AIM" => "n/a", "Stream IRC" => "n/a", "Current Song" => "n/a" ); var $altServer = False; function Radio($url) { $parsed_url = parse_url($url); $this->domain = isset($parsed_url['host']) ? $parsed_url['host'] : ""; $this->port = !isset($parsed_url['port']) || empty($parsed_url['port']) ? "80" : $parsed_url['port']; $this->path = empty($parsed_url['path']) ? "/" : $parsed_url['path']; if (empty($this->domain)) { $this->domain = $this->path; $this->path = ""; } $this->setOffset("Current Stream Information"); $this->setFields(); // setting default fields $this->setTableStart("<table border=0 cellpadding=2 cellspacing=2>"); $this->setTableEnd("</table>"); } function setFields($array=False) { if (!$array) $this->fields = $this->fieldsDefaults; else $this->fields = $array; } function setOffset($string) { $this->very_first_str = $string; } function setTableStart($string) { $this->tableStart = $string; } function setTableEnd($string) { $this->tableEnd = $string; } function getHTML($page=False) { if (!$page) $page = $this->path; $contents = ""; $domain = (substr($this->domain, 0, 7) == "http://") ? substr($this->domain, 7) : $this->domain; if (@$fp = fsockopen($domain, $this->port, $this->errno, $this->errstr, 2)) { fputs($fp, "GET ".$page." HTTP/1.1\r\n". "User-Agent: Mozilla/4.0 (compatible; MSIE 5.5; Windows 98)\r\n". "Accept: */*\r\n". "Host: ".$domain."\r\n\r\n"); $c = 0; while (!feof($fp) && $c <= 20) { $contents .= fgets($fp, 4096); $c++; } fclose ($fp); preg_match("/(Content-Type:)(.*)/i", $contents, $matches); if (count($matches) > 0) { $contentType = trim($matches[2]); if ($contentType == "text/html") { $this->isShoutcast = True; return $contents; } else { $this->isShoutcast = False; $htmlContent = substr($contents, 0, strpos($contents, "\r\n\r\n")); $dataStr = str_replace("\r", "\n", str_replace("\r\n", "\n", $contents)); $lines = explode("\n", $dataStr); foreach ($lines AS $line) { if ($dp = strpos($line, ":")) { $key = substr($line, 0, $dp); $value = trim(substr($line, ($dp+1))); if (preg_match("/genre/i", $key)) $this->nonShoutcastData['Stream Genre'] = $value; if (preg_match("/name/i", $key)) $this->nonShoutcastData['Stream Title'] = $value; if (preg_match("/url/i", $key)) $this->nonShoutcastData['Stream URL'] = $value; if (preg_match("/content-type/i", $key)) $this->nonShoutcastData['Content Type'] = $value; if (preg_match("/icy-br/i", $key)) $this->nonShoutcastData['Stream Status'] = "Stream is up at ".$value."kbps"; if (preg_match("/icy-notice2/i", $key)) { $this->nonShoutcastData['Server Status'] = "This is <span style=\"color: red;\">not</span> a Shoutcast server!"; if (preg_match("/ultravox/i", $value)) $this->nonShoutcastData['Server Status'] .= " But an <a href=\"http://ultravox.aol.com/\" target=\"_blank\">Ultravox</a> Server"; $this->altServer = $value; } } } return nl2br($htmlContent); } } else return $contents; } else { return False; } } function getServerInfo($display_array=null, $very_first_str=null) { if (!isset($display_array)) $display_array = $this->fields; if (!isset($very_first_str)) $very_first_str = $this->very_first_str; if ($html = $this->getHTML()) { // parsing the contents $data = array(); foreach ($display_array AS $key => $item) { if ($this->isShoutcast) { $very_first_pos = stripos($html, $very_first_str); $first_pos = stripos($html, $item, $very_first_pos); $line_start = strpos($html, "<td>", $first_pos); $line_end = strpos($html, "</td>", $line_start) + 4; $difference = $line_end - $line_start; $line = substr($html, $line_start, $difference); $data[$key] = strip_tags($line); } else { $data[$key] = $this->nonShoutcastData[$item]; } } return $data; } else { return $this->errstr." (".$this->errno.")"; } } function createHistoryArray($page) { if (!in_array($page, $this->trackLists)) { $this->trackLists[] = $page; if ($html = $this->getHTML($page)) { $fromPos = stripos($html, $this->tableStart); $toPos = stripos($html, $this->tableEnd, $fromPos); $tableData = substr($html, $fromPos, ($toPos-$fromPos)); $lines = explode("</tr><tr>", $tableData); $tracks = array(); $c = 0; foreach ($lines AS $line) { $info = explode ("</td><td>", $line); $time = trim(strip_tags($info[0])); if (substr($time, 0, 9) != "Copyright" && !preg_match("/Tag Loomis, Tom Pepper and Justin Frankel/i", $info[1])) { $this->tracks[$c]['time'] = $time; $this->tracks[$c++]['track'] = trim(strip_tags($info[1])); } } if (count($this->tracks) > 0) { unset($this->tracks[0]); if (isset($this->tracks[1])) $this->tracks[1]['track'] = str_replace("Current Song", "", $this->tracks[1]['track']); } } else { $this->tracks[0] = array("time"=>$this->errno, "track"=>$this->errstr); } } } function getHistoryArray($page="/played.html") { if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); return $this->tracks; } function getHistoryTable($page="/played.html", $trackColText=False, $class=False) { $title_utf8 = mb_convert_encoding($trackArr ,"utf-8" ,"auto"); if (!in_array($page, $this->trackLists)) $this->createHistoryArray($page); if ($trackColText) $output .= " <div class='lastplayed_top'></div> <div".($class ? " class=\"".$class."\"" : "").">"; foreach ($this->tracks AS $title_utf8) $output .= "<div style='padding:2px 0;'>".$title_utf8['track']."</div>"; $output .= "</div><div class='lastplayed_bottom'></div> <div class='lastplayed_title'>".$trackColText."</div> \n"; return $output; } } // this is needed for those with a php version < 5 // the function is copied from the user comments @ php.net (http://nl3.php.net/stripos) if (!function_exists("stripos")) { function stripos($haystack, $needle, $offset=0) { return strpos(strtoupper($haystack), strtoupper($needle), $offset); } } ?> And the calling script outside the lastplayed.php: include "lastplayed.php"; $radio = new Radio($ip.":".$port); echo $radio->getHistoryTable("/played.html", "<b>Last played:</b>", "lastplayed_content");

    Read the article

< Previous Page | 27 28 29 30 31