Search Results

Search found 1675 results on 67 pages for 'kill'.

Page 31/67 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• Which part of the computer needs all the power from the PSU?

  - by Xeoncross

  A couple years ago I was building a new Core 2 Quad system and after reading all the reviews was convinced that I would need at least a 400 watt power supply unit (PSU). I bought a 500W Antec EarthWatts However, last year I bought a Kill-A-Watt power meter to test some things around our house and found that my PC was only using 80W of power while idle! (C2Q, 4GB RAM, SATA HD, & DVD burner) Well, here I am building another computer with a 65watt Core 2 CPU in it and I'm wondering if I can skimp out this time and get a 300watt or so unit since my usage doesn't seem to be what everyone claims it is. I'm sure that the people in the reviews who exhausted 500watt PSU weren't lying - so what is it that uses all that? The high-end dual SLI video cards? Lots of SATA drives? Overclocking?

  Read the article

• Which Linux distro for Mac Mini?

  - by spoon16

  I recently received a Mac Mini and would like to set it up as a web server and git source server. I would like to learn Linux so am interested in setting up my Mac Mini with Linux instead of OSX. Here are the main things that I will be using the Mac Mini for. git Repositories (via Gitosis) build server (build projects in git repositories using commit hooks and run tests) simple websites (PHP) learning C++ in a non-Windows environment What distribution would you recommend? Please provide some detail in your answer so that I can make an meaningful decision. Because I am looking to use the mini as more of a server than a normal desktop machine I was thinking of Ubuntu Server, I'm not sure if that is over kill though given the hardware I am using.

  Read the article

• Which Linux distro for Mac Mini?

  - by spoon16

  I recently received a Mac Mini and would like to set it up as a web server and git source server. I would like to learn Linux so am interested in setting up my Mac Mini with Linux instead of OSX. Here are the main things that I will be using the Mac Mini for. git Repositories (via Gitosis) build server (build projects in git repositories using commit hooks and run tests) simple websites (PHP) learning C++ in a non-Windows environment What distribution would you recommend? Please provide some detail in your answer so that I can make an meaningful decision. Because I am looking to use the mini as more of a server than a normal desktop machine I was thinking of Ubuntu Server, I'm not sure if that is over kill though given the hardware I am using.

  Read the article

• Splwow64 with TS Easy Print

  - by Tim Brigham

  I have an application (Sage MIP Fund Accounting) which exports data to Excel. In this process it uses an internal print driver. Since we upgraded from 2008 to 2008 R2 this export process causes system hangs. This has been isolated down to the splwow64 executable hanging while the Excel document is building. If I kill the spwow64 executable things function properly (I just can't print it once completed). This only occurs while using printer redirection using the Remote Desktop Easy Print function - if I pull the printer redirection things work exactly as expected. I've spent the last couple hours looking at hotfixes or driver upgrades since this appears to be a problem specifically with how the Remote Desktop Easy Printer printer is functioning. Is anyone aware of a hotfix which would be applicable in this situation? I don't want to grab every hotfix for redirected printing and start throwing them out there.

  Read the article

• Sending ctrl-backslash from Windows to Linux using Synergy

  - by jrbushell

  I'm using Synergy+ to share the keyboard and mouse between a Windows and a Linux (Red Hat) PC. The Windows box is the server, Linux is the client, and both are running version 1.3.4. My Windows box is set up for English UK keyboard. In a Linux terminal window, Ctrl+\ (backslash) sends a quit signal to the currently running program - useful to kill a Python script that's run amok, for example. When I try to do this via synergy, Ctrl+- (minus) is sent instead. This has the undesired effect of resizing my terminal window :( Backslash on its own and Shift-backslash = pipe both work fine. Any ideas what's happening?

  Read the article

• Stop a runaway launchd process on OS X Leopard

  - by Skylarking

  I created a launchd .plist file to in order to have a python script run every hour. I ended up editing and later deleting the .plist file ( in /Library/LaunchDaemons )... but somehow launchd is still trying to run the script.. The file that the original .plist was calling is also no longer present ( it was in /usr/bin ).. Now every 10 seconds launchd is still attempting to run the script, fails, and respawns... I tried fixing this with Lingon.... to no avail.. Is there a way to kill this process for good? I tried logging out and restarting as well... Machine is running 10.5.8

  Read the article

• Stopping an specify Apache instance

  - by user1435991

  I have two Apache instances setup in my server (Solaris 10): Instance 1: /etc/apache2 Instance 2: /etc/apache2-instance2 To start the instance 1, I execute the following command: /usr/apache2/bin/apachectl -f /etc/apache2/httpd.conf And instance 2: /usr/apache2/bin/apachectl -f /etc/apache2-instance2/httpd.conf Both instances run perfectly, however the problem comes when I want to stop the instances. I have not been able to find a parameter to indicate what instance I want to stop. if I execute this command: /usr/apache2/bin/apachectl -k stop It will stop always the Instance 1 (the default one). The only solution that I could find to stop the instance 2 was to do this: kill -TERM 'cat /var/run/apache2-instance2/httpd.pid' Is this the only way to do it? or what is the best solution? I remember that I did something similar in Ubuntu setting a the global variable APACHE_CONFDIR before calling apachectl

  Read the article

• nginx stop/reload on windows failed for Access is denied

  - by TN.

  I am running nginx on Windows Server 2008 R2 (x64) as a windows service. I am using Windows Service Wrapper for that. (Actually, I have followed this tutorial: http://mercurial.selenic.com/wiki/HgServeNginxWindows.) The service is running ok. However, the server does not process the signals (e.g. stop / reload). This means if I stop the service, nginx is not stopped. (I have to kill it.) And when I want to reload the configuration from command line: C:\Users\Administrator>E:\apath\nginx\nginx.exe -p E:\apath\nginx -c E:\apath\nginx.conf -s reload It outputs: nginx: [error] OpenEvent("Global\ngx_reload_4268") failed (5: Access is denied) I am running the command as administrator and the service is running under NETWORK SERVICE user. Any hints or similar issues?

  Read the article

• iphone app not opening [closed]

  - by tazz789

  hi i have an iphone 2g firmware 3.1.3 ifone is jailbroken have install0us and appcake on it. i have downloaded tunein radio version 1.4 from apptrckr. it installed fine but i cannot open it. i wuold click on it, it would start i mean for like 1 second, then just close. i dont know whats wrong with it. can some please help me. i have kill sb on it, which restarts the spring board. i tried turning it off n back on again. deleted and re-installed. deleted it and turnt ifone off and back on, then re-installed it. it doesn't seem 2 work at all. any one know what 2 do. mind it is a cracked app. thankz..!!

  Read the article

• Cannot install Office 2003 Professional on a machine which formerly had 2003 Basic

  - by Paul

  Hi to all, I have a problem with one of our PCs. I've inherited this PC and it's always had MS Office basic on it; the time has come to install our Access application on it, so I'm trying to install Office Professional 2003, the problem I have is the installer says the license key is invalid; I can only assume this is down to the fact that the PC used to have Office Basic installed. I've deleted the registration keys for the OFFICE11 section of the registry, but am still getting the problem... Any suggestions as to how to kill any trace of the old install would be appreciated - its' no longer showing up in the add/remove programs window.

  Read the article

• Apache2 Service started twice

  - by Relentless

  My apache2 web-server starts twice and wont bind, so i have to do this: sudo netstat -nap | grep 0.0.0.0:443 sudo kill -9 1243 sudo /etc/init.d/apache2 restart Is there any way i can make a script out of the code above so that i can run automatically on start up? I have Ubuntu 10.04, this happened after an update. UPDATE: ports.conf - Could this be cause it: <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> could it be listening to 443 twice? or do i need to add NameVirtualHost *:443

  Read the article

• Install Office 2003 professional over Office 2003 Basic?

  - by Paul

  I have a problem with one of our PCs. I've inherited this PC and it's always had MS Office Basic on it. The time has come to install our Access application on it, so I'm trying to install Office Professional 2003. The problem I have is the installer says the license key is invalid. I can only assume this is down to the fact that the PC used to have Office Basic installed. I've deleted the registration keys for the OFFICE11 section of the registry, but am still getting the problem. Any suggestions as to how to kill any trace of the old install would be appreciated - it's no longer showing up in the add/remove programs window.

  Read the article

• screen resume works on top of VPN

  - by michael

  I connect to my network using VPN. I have screen running and 'ssh' to a server. I then kill my shell and I was able to 'resume' by 'screen -r'. This works as expect. But when I disconnect VPN and re-connect VPN, and type 'screen -r' again. I was not able to get my last screen again. And I see "Write failed: Connection reset by peer46.11 MiB | 642 KiB/s" in the screen. Can you please tell me if it possible to reconnect 'screen' if my VPN is disconnect. Thank you.

  Read the article

• Sun Grid Engine: Automatically Terminating Idle Interactive Jobs

  - by dmcer

  We're considering using Sun Grid Engine on a small compute cluster. Right now, the current set up is pretty crude and just involves having people ssh to an open machine to run their jobs. We'd like to allow interactive jobs, since that should ease the transition from manually starting jobs to starting them using qsub. But, there is some concern that, if we do, people might accidentally leave their interactive sessions idle and block other jobs from being run on the machines. The issue isn't just theoretical, since we previously tried using OpenPBS and there was a problem with people opening up an interactive job in a screen session and essentially camping on a machine. Is there anyway to configure SGE to automatically kill idle interactive jobs? It looks like this was requested as an enhancement (Issue #:2447) way back in 2007. But, it doesn't seem like the request ever got implemented.

  Read the article

• What are the implications of expanding an internal subnet mask?

  - by Philip

  Our network is currently working on a 192.168.0.x subnet, all controlled through DHCP, except for the few main servers who have hard-configured IP address settings. What would I kill if I changed the DHCP-published subnet mask from 255.255.255.0 to 255.255.0.0? The reason for doing this is not because we have a huge sudden influx of machines, but because I'd like to start partitioning specific devices into specific IP ranges (to be neat and tidy). For what its worth, I don' plan on changing the allocated DHCP address range, but rather want to move some of the reserved and excluded DHCP addresses out of the address pool. e.g. printers will be 192.168.2.x I will obviously need to change the subnet mask manually on my manually configured devices.

  Read the article

• How to run Windows 7 Explorer shell with Administrator Privileges by default

  - by Barry Kelly

  The Windows 7 shell (Explorer) can be made to run with Administrator privileges by this manual process: Kill Explorer shell by holding down Shift+Ctrl, right-clicking the Shut down button in the Start Menu, and selecting Exit Explorer Start Task Manager with Ctrl+Shift+Esc Elevate Task Manager privileges by going to Processes tab and selecting Show processes from all users Then start up a new instance of the shell by File | Run in Task Manager, typing in explorer, and selecting the Create this task with administrative privileges. After following the above process, the Windows shell will be running with administrative privileges, and any programs it launches will also have administrative privileges. This makes performing tasks that require the privilege far easier, particularly for command-line applications, which usually fail silently or with an Access denied. message rather than giving an opportunity to use UAC to elevate the process's privileges. What I'm interested in, though, is creating an account which uses a privileged shell by default, rather than having to follow this laborious process every time. How can it be done?

  Read the article

• Mac Websharing Off but Process Running

  - by benedict_w

  I have my mac setup to use php / mysql / apache via macports. Recently it has gone a bit pear shaped: it seems that the local mac versions of apache and mysql are running blocking the macports services: (48)Address already in use: make_sock: could not bind to address [::]:80 (48)Address already in use: make_sock: could not bind to address [::]:443 Web sharing in System preferences is off - How can I properly disable it? I tried turning it on an off again in System Preferences but it would not changed from off to on. Also if I kill the process it starts running again.

  Read the article

• Linux process management

  - by tanascius

  Hello, I started a long running background-process (dd with /etc/urandom) in my ssh console. Later I had to disconnect. When I logged in, again (this time directly, without ssh), the process still seemed to to run. I am not sure what happened - I did not use disown. When I logged in later, the process was not listed in top at first, but after a while it reclaimed a high CPU percentage, as I expected. So I assume dd is still running. Now, I'd like to see the progress. I use kill -USR1 <pid> but nothing is printed. Is there any way to get the output again?

  Read the article

• Monitor RAM usage on CentOS and restart Apache at a certain usage

  - by Chris

  Hi, I'm running a CentOS 5.3 server with a basic LAMP stack. I've optimized LAMP and my code to run efficiently as possible, but Apache has a memory leak somewhere that kills my server every hour or so. What is the best way to write a script that will monitor the memory usage and if it peaks over, say, 450MB kill all the Apache processes and restart Apache. I know C++/PHP and basic Linux server administration but I'm not familiar with Perl or bash scripting. I'd be open to learn any solutions, though, as a temporary solution while I find the issue.

  Read the article

• Other user SSHed from my hardware

  - by Alex

  While logged into our HPC cluster I used w to check out who else was logged in. I happened to notice that it looks like there's another user logged in from my (personal) computer; 19:04:47 up 40 days, 6:39, 44 users, load average: 0.10, 0.14, 0.18 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT ME pts/4 zerg.neuron12. 18:55 0.00s 0.09s 0.04s w SOMEONE_ELSE pts/35 zerg.neuron12. Sat14 2:27m 0.08s 0.08s -bash Is this something I should be worried out - I tried to kill the other session but had a permission denied message. Is it possible we just both have the same hardware name? I'd have thought that if this were the case the server would give one of us a different name (e.g. zerg1) when we logged in to prevent confusion. This is not an area I have any experience with, so any advice would be greatly appreciated!

  Read the article

• How do I get rid of phantom bookmarks in Google Chrome on Mac OS X 10.6?

  - by Philip

  I'm running Chrome 5.0.375.38 on OS X 10.6 Snow Leopard and although I'm positive that when I installed it I told it NOT to import my Firefox bookmarks, it nevertheless still accessed my OLD Firefox bookmarks (including some that I deleted) when I used the location bar. HOWEVER, when I opened the bookmarks manager, it said that I have no bookmarks whatsoever. Seeking to solve this problem, I installed XMarks on both FF and Chrome, and forced Chrome to download the server bookmarks. Now Chrome lists all my current FF bookmarks, but STILL sees the old, phantom bookmarks from when I first installed Chrome in the location bar, even though when I search for these same bookmarks in the bookmarks manager they don't show up. Aargh! Any ideas? Even if there's some way to force-kill-wipeout-clean-erase ALL my Chrome bookmarks that's fine as long as it kills the phantom ones b/c I can still overwrite with XMarks. Thanks!

  Read the article

• Problems starting MySQL on Mac OS X

  - by Jon

  I am not able to start MySQL server on Mac OS X 10.4.11. MySQL was installed using Macports. MySQL was running fine until it suddenly died without any obvious reason. When running "mysql", I get the error message: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/opt/local/var/run/mysql5/mysqld.sock' (2) If I try to start MySQL manually, I get the following error message: sudo /opt/local/share/mysql5/mysql/mysql.server start Starting MySQL/opt/local/share/mysql5/mysql/mysql.server: line 159: kill: (636) - No such process ERROR! In /etc/mysql/my.cnf I have: socket = __PREFIX/var/run/mysqld/mysqld.sock But the path "opt/local/var/run/mysqld/" does not exist on my system. I tried to change the socket path to "__PREFIX/var/run/mysql5/ mysqld.sock" (which is where the socket is located). Unfortunately, this did not help either. Owner and Permissions for /opt/local/var/run/mysql5/ are correctly set. Any suggestions on how to start MySQL again? Thanks for your advice.

  Read the article

• installer hanging during .net 4.5 framework install

  - by Niall Collins

  I am having trouble installing Visual studio 2012 Premium Edition. I kick off the installer for it but it hangs when installing .net 4.5 framework. I have left it for hours but there is no progression in the progress bar. I have downloaded the .net 4.5 framework separately and tried to install that from msi but that also hangs similarly. The only way to kill it is by killing the process. Any ideas how I could resolve this issue, or what I need to do to trouble shoot it further? Any tips?

  Read the article

• How to cope with runaway Flash plugin in Google Chrome browser?

  - by Norman Ramsey

  I'm using Google Chrome for Linux, version 5.0.307.11 (Official Build 39572) beta with the Linux Flash plugin version 10.0 r32. Quite often, the Flash plugin goes wild and pegs the CPU with about 95% usage. Laptop gets hot, battery drains. I can diagnose the problem with Chrome's little process monitor (shift-Esc), and I can even kill the plugin, but then when I actually want to use Flash on a page, I can't find a way to restart the plugin; I have to exit and restart Chrome, which with 30 tabs open is a huge hit. Does anyone know what causes this problem? Does anyone have a better workaround (or heaven forfend, a fix)? [I struct out both with search and with Google's help site for Chrome.]

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >