Search Results

Search found 1675 results on 67 pages for 'kill'.

Page 32/67 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• MySQL started to consume about 40% of system CPU time and got unresponsive suddenly

  - by Alex

  I use Debian 6.0.3 x86_64 and MySQL 5.5.20-1~dotdeb.0-log from the Dotdeb repository. MySQL process started to consume a lot of "sy" CPU time serveral hours ago according to this graph. I was not able to connect to running mysqld process and had to kill it. I found nothing useful in logs. My setup seems to be quite common (I assume Dotdeb just redistributes stock MySQL versions) and I have never seen anything like this before. What is the possible root cause of this? How can I prevent this situation in the future?

  Read the article

• How can I get more info on high-CPU rundll32.exe process?

  - by Herb Caudill

  I recently clean-installed Win7 on my HP8530. Everything works well most of the time, but for the last few days, every morning after my computer has been idle overnight, I find that rundll32.exe is consuming a steady 50% of CPU (i.e. all of one processor). The only way I can make it go away is by restarting. Process Explorer has no information on what the process is running. If I try to do anything to rundll32.exe (kill process, suspend, etc.) I get "Error opening process: Access is denied." None of the tabs in the ProcExp properties dialog has any information at all. I have Norton Internet Security running with the latest definitions; I've run a full system scan and it gives me a clean bill of health. How can I get more information on why this process is running?

  Read the article

• Google Chrome: "The application failed to initialize properly"

  - by Zack Peterson

  Google Chrome stopped working for me today. When I launch Chrome, I see the following error: Windows - Application Error The application failed to initialize properly (0xc0000135). Click OK to terminate the application. It fails to load the New Tab Page. After a moment, I see the following error: Google Chrome The following page(s) have become unresponsive. You can wait for them to become responsive or kill them. My operating system is Microsoft Windows Vista. I've tried: uninstalled Chrome rebooted reinstalled Chrome rebooted That didn't fix it. What now? Any ideas?

  Read the article

• Her microphone produces white noise, after a while?

  - by Wolfpack'08

  When my friend Skypes with me or gets on FB Video with me, her sound works fine... at first. After a bit, it starts sounding like loud static. It happens more frequently as we restart video chats, until it happens as soon as we open video chats. We usually restart her PC to fix the issue. Is there a process we could kill, maybe? Skip that question, if you will, and jump to these two: How do we fix this? Why is this happening?

  Read the article

• Round-Robin DNS in mobile networks

  - by k7k0

  After reading load distribution alternatives and giving my limited skills on the area I'm biased toward round-robin DNS strategy. From what I understood, one key aspect of DNS Round-Robin is setting a low TTL value, avoiding caching. My main concern is that all my traffic comes from mobile networks, almost 30% of that comes from t-mobile 3G. Some questions: 1) Is there a chance that almost all clients on the same mobile network will be redirected to the same IP in the TTL frame? That would kill the distribution technique. 2) If I choose a really low TTL (zero or one). That impacts directly over client performance? It does a DNS miss every time or it's a setting that only impacts on DNS servers? Any help would be much appreciated. Thanks

  Read the article

• Using XFCE4 with awesome

  - by whitequark

  When I got tired of using the standard XFCE window manager, xfwm, I simply installed openbox and selected "XFCE/Openbox" session in the GDM login screen. This was very convenient because I didn't want the plain Openbox session in which there are no network-manager, no panels, nothing. Now I have installed awesome: I really like the idea of tiling window managers. But after I launched it, everything went wrong. Absence of XFCE panels isn't anything bad, but subpixel-aliased fonts were somehow turned on, and that was really awful. I tried to login in XFCE, kill openbox/xfwm and start awesome, but that didn't worked: xfce4-session keeps restarting it's predefined WM, and killing it kills the whole X session too. And I didn't found the configuration for a dropdown list in GDM either. How can I start XFCE session with awesome as a WM?

  Read the article

• How to safely remove a device blocked by the System process with a handle on \$Extend\$RmMetadata\$Txf

  - by Heinzi

  I have an external HDD which I would like to "safely remove". Unfortunately, my system (Windows 7 x64) complains that "the device is currently in use". Using Process Explorer I discovered which process is holding a handle on the device: Obviously, System is not a process that I can just kill and be done with it. I've done a bit of research and this seems to be a common problem, but no solution has been found so far (except for rebooting the machine, which I'd like to avoid if possible). Is there any solution to this problem that I've missed?

  Read the article

• Apache 2.2.16 + PHP 5.2.14 sometimes causes Apache to not stop properly

  - by ZiggyTheHamster

  Sometimes, Apache decides not to shut down nicely. killall apache2 or kill -9 (apache2 PID here) shuts it down so that it can actually start back up without the port being in use. Other posts seem to indicate that PHP 5.2 might have issues hanging up Apache. I'm using the worker MPM on an x86_64 Gentoo Linux system if that helps. Any other things I should consider hanging up Apache besides PHP? Should I be stopping Apache with /etc/init.d/apache2 gracefulstop instead of /etc/init.d/apache2 stop?

  Read the article

• One of my apache processes is huge - how can I find out why?

  - by Malcolm Box

  I'm running Apache 2.2.12 with mod_wsgi, hosting a Django site. Most of the apache child processes weigh in at about 125MB RSS, but occasionally I see one child balloon to 1GB RSS. At this point there's usually 1 huge process (1GB), a couple of large ones (500MB) and the rest are still ~125MB. These are the mod_wsgi daemon processes. I've tried using memory leak tracing in Python to see if it's the Django code, and I see no leaks. Looking in the logs doesn't show any particularly strange requests. I'm stumped on how to figure out what's causing this - any ideas? Also, any workaround ways to kill the large apache process when it gets too big, without bringing apache down? Some more details: Not using mod_php Using pre-fork

  Read the article

• Find running processes created by Mac Automator

  - by zechdc

  Is there any way to view automator process that are running? About a year ago I created a workflow or something similar in Mac's Automator. When I took screenshots mac would place them on the desktop. I created a small script to take move those screenshots to a different folder. I want to change what folder those are saved in now. Problem is, I can't figure out how to edit my workflow. The biggest problem, I don't know where the workflow/file is stored. The process is always running so anytime I take a screenshot it is moved. Is there any way to view automator process that are running? Also, I know there are other ways to make screenshots appear in different folders. I still want to find this process/script and kill it =) Any suggestions are greatly appreciated. Thanks.

  Read the article

• Howto return to virtual machine when remote desktop hangs?

  - by tangens

  I'm using a vmware virtual machine running ubuntu linux and from there I connect to a Windows XP machine using rdesktop through a VPN tunnel. This configuration is given and cannot be changed. From time to time my internet connection does a reconnect. Then the running rdesktop (running in fullscreen mode) process freezes and isn't usable anymore. Now I want to return to the underlying linux and restart the rdesktop process. But I'm not able to get out of fullscreen rdesktop mode and so I cannot access the ubuntu desktop to kill any process. My solution is to reboot the vmware and start the rdesktop again. Is there a better way to get the configuration running again after a freeze? EDIT: I have no admin rights for the linux system. Everything must be done with user rights.

  Read the article

• Can't reconnect to my RDP session

  - by Jeremy Stein

  I use a VM through RDP. When I'm done for the day, I just disconnect the session and reconnect in the morning. That allows me to pick up what I was doing and not close all the applications. As I'm the only user, this generally works well. Today, I can't reconnect to my session from yesterday. When I RDP, I get a new session. When I run query user, I can see my other session: USERNAME SESSIONNAME ID STATE IDLE TIME LOGON TIME me rdp-tcp#82 1 Active 15:00 4/22/2010 9:00 AM me rdp-tcp#91 2 Active . 4/30/2010 9:00 AM If I try to use Terminal Services Manager to remote control the other session, I get this error: Session (ID 1) remote control failed (Error 7044 - The request to control another session remotely was denied. ) Is there any way to reconnect to this session, or do I need to just kill it?

  Read the article

• Linux DD command partition -to- partition

  - by Ben Jackson

  I just used the DD command to copy the contents of one partition over to another partition on another drive, like this: dd if=/dev/sda2 of=/dev/sdb2 bs=4096 conv=noerror sda2 partition was 66GB and sdb2 was 250GB. I read that by doing this the extra space on the drive I am copying to will be wasted, is this true? I wasn't worried about loosing the extra space for the time being however, I just ran: sudo kill -USR1 (PID) to view the current status of DD and it has written over 66GB of data, will it continue to write data until it gets to 250GB? If so, is there a way to stop the process without corrupting it as waiting for it to write blank space seems like a waste of time.

  Read the article

• Block spam by using geoip filter?

  - by faultyserver

  We are looking for a way to be able to block spam based on geographic location by filtering using geoip. context: we rarely have any email correspondence outside of the USA, so we would like to block all incoming email outside the US except for maybe one or two countries. After a little Googling I have found a couple of solutions that may work (or not), but I would like to know what other sysadmins are currently doing or what they would recommend as a solution. Here is what I have found so far: Using PowerDNS and its GeoIP backend it is possible to use geoip for filtering. Normally this backend is used to help distribute load as a kind of load balancing but I dont see why it couldnt be used to kill spam as well? Possibly use the Maxmind lite country database and some scripting to do a similar job. Ideally what I am looking for is a solution that would handle decent load and scale well too...aren't we all! ;) Thanks in advance for your help! :-)

  Read the article

• How can I terminate wisptis.exe in Windows XP SP2

  - by user9950

  I am working in a production environment. Basically I work on graphics oriented enviroment so I used to work on catia and windchill as well. When I am opening a part or diagram in Catia along with CNEXT .exe (catia service) wisptis.exe is starting and making the system halt and Catia will crash. So I need to restart the worksation or I need to close all applications then I need to open catia then again the same problem. So please tell me how to avoid this or stop the wisptis.exe service. If I want to work on catia I need to kill wisptis.exe service otherwise I cant work.

  Read the article

• HTTP 401 Challenge and HTTP 302 Login/Redirect won't work together in IIS7

  - by RandomBen

  I am developing a website using .NET 3.5 that allow users to visit the site and create logins using the standard Microsoft login controls. However, users do not need to login to do general things like view products. Now I need to setup the site so some of our Traveling Sales people are able to access it but not allow anyone else to access it. The easiest way I know how to do this is to turn on Windows Authentication for the Site in IIS7. When I do that I get all sorts of errors due to also having Forms Authentication turned on. If I turn Forms Auth then I get a different kind of error. Does anyone know how to make Forms Auth and Windows Auth play nice on a single site in IIS7 or some other way to create a required login without having me kill Forms Auth?

  Read the article

• bash process uses 90% CPU, comes back on computer restart

  - by Sano

  I’ve replaced the old HDD of my late 2008 unibody MacBook (8 GB of RAM, running OS X 10.7.4) with an OCZ Vertex 3 SSD. After doing this, I've installed Lion and restored my data from a Time Machine backup. Everything is fine, except for a process named “bash” that permanently uses about 90 % CPU. If I kill it via Activity Monitor, everything goes back to normal, but unfortunately the process comes back every time I restart the computer. I've tried do zap the PRAM, reinstall 10.7.4 from the combo package, and even simply wait for more than 2 hours, but the problem is still here.

  Read the article

• How do I open a 60M png image on OSX

  - by Topener

  Alright, so I've been looking around on this site on how to open a big PNG image. The question I found was about a 10M png. Xee apparently did the job. So, I downloaded Xee for my 60M file, but it crashes. So does iPhoto, Pixelmator and previewer. In the Pixelmator and Xee case, I actually had to kill the computer, and restart it. It crashed so 'hard' I couldn't get it to respond again. How do I open this file? (and zoom it) Specs: newly acquired macbook pro: 4gb memory, 2.3ghz i7 58M png image approx: 15000x30000 pixels

  Read the article

• unable to re-attach screen session on freebsd

  - by Michael

  I have a screen session that I am unable to re-attach to. I have tried kill -CHLD 6859, with zero success. Is there anything else that I can try to get this session re-attached q4# screen -ls No Sockets found in /tmp/screens/S-root. q4# ls -la /tmp/screens/S-root/ total 8 drwx------ 2 root wheel 512 May 26 12:52 . drwxr-xr-x 4 root wheel 512 Feb 26 2013 .. prwx------ 1 root wheel 0 May 26 10:14 6859.pts-0.q4 q4# ps uax 6859 USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND root 6859 0.0 1.2 84732 50444 ?? Ss 2Jan13 34:06.71 screen -h 9999 q4# screen -r There is no screen to be resumed. q4# whoami root q4#

  Read the article

• Mac has become insanely slow : Processes SystemUIServer, UserEventAgent and loginwindow using a lot of memory

  - by SatheeshJM

  I have been using my Mac for for many months without any problem. But recently all of a sudden the Mac became insanely slow. I opened Activity Manager to see what was happening. For three processes SystemUIServer, UserEventAgent and loginwindow, the memory gradually increases and reaches upto 2 GB for each process. This completely hangs up my Mac. I tried the following : 1. Restart Mac 2. Restart Mac in safe mode 3. Manually kill the processes 4. Remove Date and Time from Menu bar(this was supposed to be the problem for the SysteUIServer process's memory according to many users) 5. Removed the externally connected keyboard and mouse(some had suggested this for UserEventAgent's memory) No luck with any of those. The moment I log in, the memory spikes up. Any idea what the hell is happening? Please help.

  Read the article

• What to use as a file server with a web interface and user management on MAMP

  - by Timo

  I want to set up file/photo sharing for a largish group of friends and family. Flickr, Picasa etc. are not optimal solutions because setting up accounts, sharing albums and navigating privacy settings is going to be overwhelming for some of the people. I just want to be able to give people a URL, a username, and password and have it be easy peasy. I want something very simple and easy to use (for the user) like MyTunesRSS. I've looked at a complete "social" solution like Elgg but that feels like using a cadillac to kill a fly. I only need: User management Simple upload / download of files Plug-into-MAMP ease of setup is a bonus Search / metadata / tags / commenting not necessary but also earns bonus points Free / cheap licence What would you recommend?

  Read the article

• How to clear stuck locked maildrop pop3 process

  - by Joshua

  I am using cyrus for imap and pop One of my users is getting the following error: Unable to lock maildrop : Mailbox is locked by POP server. I can see where it starts in the log. I've read that there is no physical lock file anymore (i've tried looking for it anyways) and that the solution is to just wait for the timeout, or kill the offending pop3 process. I know that this is happening because of a lossy connection on the part of the affected user, and that pop3 can only have 1 session active at a time. I need to manually clear the lock and I am having trouble finding the offending pop process. I have tried lsof, but it doesn't say how long the individual files (sockets) have been opened for. I've reduced the tcp keepalive time down to 5 mins, but I still need to reset this guy's lock. I could use some pointers. Thanks!

  Read the article

• How to make PuTTY X11 forwarding work in a screen session?

  - by Alex Howell

  I'm using PuTTY with X11 forwarding enabled, using Xming as my X server on Windows 7. When I SSH to a Linux host, X11 forwarding works fine. If I start a "screen" screen manager session, it still works fine. If I disconnect from the screen session, then later resume in a different PuTTY window using "screen -rd", X11 forwarding doesn't work any more - I get an error: xterm X connection to localhost:11.0 broken (explicit kill or server shutdown). This seems to be because $DISPLAY is different in each PuTTY SSH session (localhost:11.0 in the first session, then localhost:12.0 in the next, and so on). If I manually set $DISPLAY to localhost:12.0 in the screen session, X11 forwarding works again. Is there a way to automatically set $DISPLAY in the screen session, each time it's resumed, so that it always matches the parent PuTTY session's?

  Read the article

• How can I change a video container without re-encoding or compressing the file?

  - by GiH

  When I ripped my Kill Bill DVD I used handbrake and put it into a single avi. I realize that I didn't get the subtitles, so what I want to do is convert the AVI to MKV and put the subtitles in the mkv. How do I go about doing this without losing any qualityI don't care about compressing or anything ju? I don't care about compressing or anything, just want to change the container. If handbrake can do it, I'd prefer to use that since I already have it.

  Read the article

• What's the best way to clean up after a fork bomb?

  - by raldi

  $ ls bash: no more processes Uh oh. Looks like someone made a fork bomb. Where I used to work, this pretty much meant that the shared server would need to be power-cycled, since even the sysadmins with root often couldn't get the problem cleaned up. Often, they couldn't even get a prompt. I've heard a few tricks (notably, to send STOP signals rather than KILL signals, since the latter would allow the remaining threads to immediately replace the killed ones), but I've never seen a comprehensive guide entitled So, You Have Yourself a Fork Bomb? Let's make one.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >