Search Results

Search found 863 results on 35 pages for 'orange kid'.

Page 31/35 | < Previous Page | 27 28 29 30 31 32 33 34 35  | Next Page >

  • Power cycles on/off 3 times before booting properly from cold start, no other issues (New System)

    - by James
    Relevant Specs: Sapphire 5850, core i7 920, Seasonic x750 power supply, ECS X58B-A2 mobo. From a cold boot, meaning all power totally disconnected at the wall, the system will power on for less than a second and then power off completely. After two seconds of being powered off this will repeat and on the third "attempt" the computer will boot. To be very specific here is what happens: The power is turned on at the wall and on the psu, the orange stdby LED on the mobo is illuminated but the system is 'off'. I hit the power button on the case or on the mobo itself I hear the relay (?) in the psu closing The case light comes on and the mobo power light comes on. The fans start rotating. Immediately after this the I hear some relay click - the power lights extinguish, the fans stop, the stdby light remains on. Less than 2 seconds pass and the cycle repeats without any intervention from me. On the third attempt it boots normally and the machine runs perfectly. If I do a soft reboot or a full shutdown the computer starts normally the next time. It's only if I pull the power cord or flick the switch off on the PSU that I get the cycling again. Basically any time the stdby light on the mobo goes out. I have removed the graphics card and I get the same problem. I have removed the PSU, hotwired it to the ON position and verified voltages on all lines. The relay does not cycle when I do this. If I connect only the 24 pin ATX connector to the mobo and not the 8 pin ATX12V / CPU connector then I will not get the cycling, the fans run, the power light stays on, but obviously the system can't boot. Disconnecting all fans has no effect on the problem. My feeling it that it's something to do with the motherboard like a capacitor that's taking a long time to charge because it's leaking or something along those lines. But I can't imagine what could be 'wrong' with it and only manifest itself as a problem under these very specific circumstances. Any ideas? Thanks.

    Read the article

  • script to recursively check for and select dependencies

    - by rp.sullivan
    I have written a script that does this but it is one of my first scripts ever so i am sure there is a better way:) Let me know how you would go about doing this. I'm looking for a simple yet efficient way to do this. Here is some important background info: ( It might be a little confusing but hopefully by the end it will make sense. ) 1) This image shows the structure/location of the relevant dirs and files. 2) The packages.file located at ./config/default/config/packages is a space delimited file. field5 is the "package name" which i will call $a for explanations sake. field4 is the name of the dir containing the $a.dir i will call $b field1 shows if the package is selected or not, "X"(capital x) for selected and "O"(capital o as in orange) for not selected. Here is an example of what the packages.file might contain: ... X ---3------ 104.800 database gdbm 1.8.3 / base/library CROSS 0 O -1---5---- 105.000 base libiconv 1.13.1 / base/tool CROSS 0 X 01---5---- 105.000 base pkgconfig 0.25 / base/tool CROSS 0 X -1-3------ 105.000 base texinfo 4.13a / base/tool CROSS DIETLIBC 0 O -----5---- 105.000 develop duma 2_5_15 / base/development CROSS NOPARALLEL 0 O -----5---- 105.000 develop electricfence 2_4_13 / base/development CROSS 0 O -----5---- 105.000 develop gnupth 2.0.7 / extra/development CROSS NOPARALLEL FPIC-QUIRK 0 ... 3) For almost every package listed in the "packages.file" there is a corresponding ".cache file" The .cache file for package $a would be located at ./package/$b/$a/$a.cache The .cache files contain a list of dependencies for that particular package. Here is an example of one of the .cache files might look like. Note that the dependencies are field2 of lines containing "[DEP]" These dependencies are all names of packages in the "package.file" [TIMESTAMP] 1134178701 Sat Dec 10 02:38:21 2005 [BUILDTIME] 295 (9) [SIZE] 11.64 MB, 191 files [DEP] 00-dirtree [DEP] bash [DEP] binutils [DEP] bzip2 [DEP] cf [DEP] coreutils ... So with all that in mind... I'm looking for a shell script that: From within the "main dir" Looks at the ./config/default/config/packages file and finds the "selected" packages and reads the corresponding .cache Then compiles a list of dependencies that excludes the already selected packages Then selects the dependencies (by changing field1 to X) in the ./config/default/config/packages file and repeats until all the dependencies are met Note: The script will ultimately end up in the "scripts dir" and be called from the "main dir". If this is not clear let me know what need clarification. For those interested I'm playing around with T2 SDE. If you are into playing around with linux it might be worth taking a look.

    Read the article

  • How to change mouse pointer icon in Xfce Debian 7 Wheezy?

    - by kadaj
    I copied the cursor theme (oxy-neon or Oxygen Neon) to /usr/share/icons and from Applications Menu - Settings - Mouse, I am able to see the new theme. I clicked on it and the pointer doesn't change. However the text typing icon ('I'), busy icon, hand icon, and resize window icons got changed. The pointer icon remains the same, the black Adwaita. I removed the Adwaita folder from the icons folder, and still the mouse pointer doesn't change. Is the pointer theme specified elsewhere? I have no setting under home directory. I tried logging out, restart, restarting xfwm4, but nothing works. I just found that the icon pointer changes when the pointer is inside Firefox, but it's not consistent. It keeps changing when I click menu items. Very weird. Any idea how to fix this? This is the output of running: gsettings list-recursively org.gnome.desktop.interface : ~$ gsettings list-recursively org.gnome.desktop.interface org.gnome.desktop.interface automatic-mnemonics true org.gnome.desktop.interface buttons-have-icons false org.gnome.desktop.interface can-change-accels false org.gnome.desktop.interface clock-format '24h' org.gnome.desktop.interface clock-show-date false org.gnome.desktop.interface clock-show-seconds false org.gnome.desktop.interface cursor-blink true org.gnome.desktop.interface cursor-blink-time 1200 org.gnome.desktop.interface cursor-blink-timeout 10 org.gnome.desktop.interface cursor-size 24 org.gnome.desktop.interface cursor-theme 'Adwaita' org.gnome.desktop.interface document-font-name 'Sans 11' org.gnome.desktop.interface enable-animations true org.gnome.desktop.interface font-name 'Cantarell 11' org.gnome.desktop.interface gtk-color-palette 'black:white:gray50:red:purple:blue:light blue:green:yellow:orange:lavender:brown:goldenrod4:dodger blue:pink:light green:gray10:gray30:gray75:gray90' org.gnome.desktop.interface gtk-color-scheme '' org.gnome.desktop.interface gtk-im-module '' org.gnome.desktop.interface gtk-im-preedit-style 'callback' org.gnome.desktop.interface gtk-im-status-style 'callback' org.gnome.desktop.interface gtk-key-theme 'Default' org.gnome.desktop.interface gtk-theme 'Adwaita' org.gnome.desktop.interface gtk-timeout-initial 200 org.gnome.desktop.interface gtk-timeout-repeat 20 org.gnome.desktop.interface icon-theme 'gnome' org.gnome.desktop.interface menubar-accel 'F10' org.gnome.desktop.interface menubar-detachable false org.gnome.desktop.interface menus-have-icons false org.gnome.desktop.interface menus-have-tearoff false org.gnome.desktop.interface monospace-font-name 'Monospace 11' org.gnome.desktop.interface show-input-method-menu true org.gnome.desktop.interface show-unicode-menu true org.gnome.desktop.interface text-scaling-factor 1.0 org.gnome.desktop.interface toolbar-detachable false org.gnome.desktop.interface toolbar-icons-size 'large' org.gnome.desktop.interface toolbar-style 'both-horiz' org.gnome.desktop.interface toolkit-accessibility false ~$

    Read the article

  • Detection of battery status totally messed up

    - by Faabiioo
    I already posted this question in the Ubuntu forum and stackOverflow. I forward it here with the hope to find some different opinions about the problem. I have an Acer TravelMate 5730, which is 3 y.o., running Ubuntu 10.04 LTS. One year ago I changed the battery because the old one died. Since then, everything worked like a charm. A week ago I was using my laptop running on battery; it was charged up to 60%. Suddenly it shut down and for about 24h it was like the battery was totally broken: it didn't charge anymore and the 'upower --dump' said state: critical. I was kind of resigned to buy a new battery, when suddenly the orange light became green: battery was charged and actually working; strangely the battery indicator was stuck to 100%, even after 2 hours running. I tried again with 'upower --dump' or 'acpi -b' commands and it kept saying battery is discharging, though maintaining the percentage to 100%. Thus, battery working fine up to 3 hours, without any warning when it was almost empty, likely to result in a brute shut down. Today something different. the 'upower --dump' command says: ... present: yes rechargeable: yes state: fully-charged energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.481 V percentage: 0% capacity: 100% technology: lithium-ion I tried to boot WinXP and the problem is pretty much the same, with the battery fully-charged, percentage equal to 0% and no way to fix it. While writing, the situation has changed again: present: yes rechargeable: yes state: charging energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.474 V percentage: 0% capacity: 100% technology: lithium-ion ...charging, but it does not charge up. (Recall, the battery lasted 3 hours until yesterday!). So, the big question is: is it an hardware issue, like a dedicated internal circuit is broken? or maybe it is just the battery that must be changed. Or, rather, some BIOS problem that could be fixed in some way. I'd appreciate every help that can shed some light on this annoying problem thanks

    Read the article

  • JSF index out of bounds exception when submiting a form

    - by selvin
    When I click submit button in a JSF form the following exception occurs. It says an Indexout of bounds exception, but I did not use any ArrayList associated with the code. Is this a bug? what should i do to get rid of this error.. Mojarra: 2.0.2 FCS with primefaces 2.2 JSF: 2.0 NetBeans IDE 6.8 Glassfish Domain V3 Form Code: <p:panel id="jobres" style="min-width: 200px" header="Reservation" widgetVar="jres" closable="true" toggleable="true" > <h:form id="arj" prependId="false" style="width:550px;max-height:400px;overflow:auto;"> <p:tooltip global="true"/> <h:panelGrid columns="2" > <p:panel style="min-width: 220px"> <h:outputLabel value="1.Job type:"/> </p:panel> <h:panelGroup> <h:messages id="aerr"/> <h:selectOneMenu title="Choose a Jobtype" value="#{arjob.jobtype}"> <f:selectItem itemLabel="Sequential" itemValue="sequential"/> <f:selectItem itemLabel="Parallel" itemValue="parallel"/> </h:selectOneMenu> </h:panelGroup> <p:panel> <h:outputLabel value="2.Executable: *"/> </p:panel> <h:panelGroup> <p:fileUpload id="aexeupload" fileUploadListener="#{arjob.chooseListener}" auto="true" update="adlist :erdialog" description="Resource Files"> </p:fileUpload> <br/> <h:panelGroup id="aexelistwrapper"> <p:dataList var="fileList" type="ordered" id="adlist" value="#{arjob.fexelist}"> <p:column> #{fileList}&nbsp; <p:commandLink ajax="true" update="aexelistwrapper" actionListener="#{arjob.removeExe(fileList)}"> <p:graphicImage value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGroup> </h:panelGroup> <p:panel> <h:outputLabel value="3.Argument(s):"/> </p:panel> <h:panelGroup> <u style="color:orange"> <i> <p:inplace emptyLabel="Add Arguments" onEditUpdate="aarglist"> <h:inputText title="Enter the arguments" id="aiparg" value="#{arjob.args}"> <f:ajax event="valueChange"/> </h:inputText> <p:commandButton update="aarglistwrapper erdialog" value="add" actionListener="#{arjob.addArg}"/> </p:inplace> </i> </u> </h:panelGroup> <h:panelGroup> </h:panelGroup> <h:panelGroup> <h:panelGrid id="aarglistwrapper"> <p:dataList id="aarglist" type="ordered" var="args" value="#{arjob.arglist}"> <p:column id="col2"> #{args}&nbsp; <p:commandLink ajax="true" update="arj:arglistwrapper" actionListener="#{arjob.removeArgs(args)}"> <p:graphicImage title="remove" value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGrid> </h:panelGroup> <p:panel> <h:outputLabel value="4.InputFile(s): *"/> </p:panel> <h:panelGroup> <p:fileUpload id="ainpupload" fileUploadListener="#{arjob.inputChooseListener}" auto="true" update="aipfilelistwrapper :erdialog" description="Resource Files"> </p:fileUpload> <br/> <h:panelGroup id="aipfilelistwrapper"> <p:dataList var="ipfile" type="ordered" id="aipflist" value="#{arjob.finlist}"> <p:column> #{ipfile}&nbsp; <p:commandLink ajax="true" update="aipfilelistwrapper" actionListener="#{arjob.removeInfile(ipfile)}"> <p:graphicImage value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGroup> </h:panelGroup> <h:panelGroup> <p:panel > 5)Output File(s): </p:panel> </h:panelGroup> <h:panelGroup> <u style="color:orange"> <i> <p:inplace emptyLabel="Add file name" id="aipexe"> <h:inputText title="Enter the output filenames" id="aexe" value="#{arjob.ofilename}"> <f:ajax event="valueChange"/> </h:inputText> <p:commandButton update="adoutlist :erdialog" value="add" actionListener="#{arjob.addOutfile}"/> </p:inplace> </i> </u> </h:panelGroup> <h:panelGroup> </h:panelGroup> <h:panelGroup> <h:panelGrid id="afilelistwrapper"> <p:dataList id="adoutlist" type="ordered" var="ofile" value="#{arjob.foutlist}"> <p:column id="acol"> #{ofile}&nbsp; <p:commandLink ajax="true" update="afilelistwrapper" actionListener="#{arjob.removeOutfile(ofile)}"> <p:graphicImage value="images/closebar.png"/> </p:commandLink> </p:column> </p:dataList> </h:panelGrid> </h:panelGroup> <p:panel> <h:outputLabel value="6) Operating System"/> </p:panel> <h:panelGroup> <h:selectOneMenu title="Select an OperatingSystem" value="#{arjob.os}"> <f:selectItem itemLabel="CentOS Release 5.2" itemValue="Cent OS 5.2"/> <f:selectItem itemLabel="RHEL Server Release 5" itemValue="RHEL server 5"/> <f:selectItem itemLabel="RHEL Server Release 5.2" itemValue="RHEL server 5.2"/> </h:selectOneMenu> </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="7) Physical Memory:"/> </p:panel> </h:panelGroup> <h:panelGroup> <p:spinner min="0" style="width: 100px" stepFactor="10" value="#{arjob.mem}"> </p:spinner>(MB) </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="8) Disk Space:"/> </p:panel> </h:panelGroup> <h:panelGroup> <p:spinner min="0" style="width: 100px" stepFactor="10" value="#{arjob.diskspace}"> </p:spinner>(MB) </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="9) CPU Mhz:"/> </p:panel> </h:panelGroup> <h:panelGroup> <p:spinner min="0" style="width: 100px" stepFactor="10" value="#{arjob.cpumhz}"> </p:spinner>(Mhz) </h:panelGroup> <p:panel> <h:outputLabel value="10) Start Time:"/> </p:panel> <h:panelGroup> <p:inputMask title="(YYYY-MM-DD HH:MM:SS)" mask="9999-99-99 99:99:99" value="#{arjob.startt}"> </p:inputMask> </h:panelGroup> <p:panel> <h:outputLabel value="11) End Time:"/> </p:panel> <h:panelGroup> <p:inputMask title="(YYYY-MM-DD HH:MM:SS)" mask="9999-99-99 99:99:99" value="#{arjob.endt}"> <p:ajax event="valueChange"/> </p:inputMask> </h:panelGroup> <p:panel> <h:outputLabel value="12) LRMS type"/> </p:panel> <h:panelGroup> <h:selectOneMenu value="#{arjob.lrms}"> <f:selectItem itemLabel="PBS" itemValue="PBS"/> <f:selectItem itemLabel="SGE" itemValue="SGE"/> </h:selectOneMenu> </h:panelGroup> <h:panelGroup> <p:panel> <h:outputLabel value="13)Number of Nodes: *"/> </p:panel> </h:panelGroup> <h:panelGroup> <h:panelGroup> <p:spinner style="width: 100px" min="1" max="100" value="#{arjob.numnodes}"> </p:spinner> </h:panelGroup> </h:panelGroup> <h:panelGroup> </h:panelGroup> <h:panelGroup> <p:commandButton ajax="false" value="Submit" action="#{arjob.jobSubmitAction}"/> </h:panelGroup> </h:panelGrid> </h:form> <p:draggable for="jobres" handle=".ui-panel-titlebar"/> </p:panel> Exception: SEVERE: javax.faces.FacesException: Unexpected error restoring state for component with id j_idt7. Cause: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0. at com.sun.faces.application.view.StateManagementStrategyImpl$2.visit(StateManagementStrategyImpl.java:239) at com.sun.faces.component.visit.FullVisitContext.invokeVisitCallback(FullVisitContext.java:147) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1446) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1457) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1457) at javax.faces.component.UIComponent.visitTree(UIComponent.java:1457) at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:223) at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177) at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:131) at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:430) at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143) at javax.faces.application.ViewHandlerWrapper.restoreView(ViewHandlerWrapper.java:288) at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199) at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101) at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312) at org.apache.catalina.core.StandardWrapper.service(StandardWrapper.java:1523) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:343) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:215) at org.primefaces.webapp.filter.FileUploadFilter.doFilter(FileUploadFilter.java:79) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:256) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:215) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:277) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:188) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:641) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:97) at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:85) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:185) at org.apache.catalina.connector.CoyoteAdapter.doService(CoyoteAdapter.java:332) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:233) at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:165) at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791) at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693) at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954) at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170) at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102) at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88) at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76) at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53) at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57) at com.sun.grizzly.ContextTask.run(ContextTask.java:69) at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadPool.java:330) at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool.java:309) at java.lang.Thread.run(Thread.java:619) Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0 at java.util.ArrayList.RangeCheck(ArrayList.java:547) at java.util.ArrayList.get(ArrayList.java:322) at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161) at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427) at com.sun.faces.application.view.StateManagementStrategyImpl$2.visit(StateManagementStrategyImpl.java:231) ... 45 more

    Read the article

  • What was your the most impressive technical programming achievement performed to impress a romantic

    - by DVK
    OK, so the archetypal human story is for a guy to go out and impress the girl with some wonderful achievement like slaying a dragon or building a monument or conquering neighboring tribe. This being enlightened 21st century on SO, let's morph this into a: StackOverflower performing a feat of programming to impress a romantic interest. There are two ways to do this: Technical achievement: Impressing a person with suitable background/understanding of programming with actual coding powerss you displayed. A dumb movie example would be that kid in "Hackers" move showing off his hacking skills in front of Angeline Jolie. Artistic achievement: Impressing a person with a result of running said code, whether they understand just how incredible the code itself is. An example is the animated ANSI rose (for a guy who actually wrote the ANSI code) This question is only about the first kind (technical achievements) - e.g. the person of interest was presented with impressive code/design that (s)he was able to properly appreciate. Rules (what doesn't qualify): The target audience must have been a person of romantic interest (prospective or present significant other or random hook-up). E.g. showing your program to your sister who's also a software developer doesn't count. The achievement must have been done specifically with the goal to impress such a person. However, it is OK if the achievement was done to impress a generic qualifying person, not someone specific. Although... if you write code to impress girls in general, I'd say "get a better idea of the opposite sex" The achievement must have been done with the goal of impressing the person. In other words, if you would have done it without romantic interest's knowledge anyway, it doesn't count. As examples, the following does not count: programming for your job. Programming for a coding contest. Open Source program that you'd have done anyway. The precise nature of the awesomeness of the achievement is somewhat irrelevant - from learning entire J2EE in 2 days to writing fancy game engine to implementing Python compiler in LOGO. As long as it's programming/software development related. The achievement should preferably be something other people would rank highly as well. If your date was impressed with your skill at calculating Fibonacci sequence without recursive function calls, it doesn't mean most developers will be. But it does mean you need to start finding better things to do on dates ;)

    Read the article

  • Why keylistener is not working here?

    - by swift
    i have implemented keylistener interface and implemented all the needed methods but when i press the key nothing happens here, why? package swing; import java.awt.Color; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridLayout; import java.awt.Point; import java.awt.RenderingHints; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.KeyListener; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import java.awt.event.MouseMotionListener; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import java.awt.image.BufferedImage; import javax.swing.BorderFactory; import javax.swing.BoxLayout; import javax.swing.ImageIcon; import javax.swing.JButton; import javax.swing.JFrame; import javax.swing.JLayeredPane; import javax.swing.JPanel; import javax.swing.JTextArea; class Paper extends JPanel implements MouseListener,MouseMotionListener,ActionListener,KeyListener { static BufferedImage image; String shape; Color color=Color.black; Point start; Point end; Point mp; Button elipse=new Button("elipse"); int x[]=new int[50]; int y[]=new int[50]; Button rectangle=new Button("rect"); Button line=new Button("line"); Button roundrect=new Button("roundrect"); Button polygon=new Button("poly"); Button text=new Button("text"); ImageIcon erasericon=new ImageIcon("images/eraser.gif"); JButton erase=new JButton(erasericon); JButton[] colourbutton=new JButton[9]; String selected; Point label; String key; int ex,ey;//eraser //DatagramSocket dataSocket; JButton button = new JButton("test"); JLayeredPane layerpane; Point p=new Point(); int w,h; public Paper() { JFrame frame=new JFrame("Whiteboard"); frame.setVisible(true); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setSize(640, 480); frame.setBackground(Color.black); layerpane=frame.getLayeredPane(); setWidth(539,444); setBounds(69,0,555,444); layerpane.add(this,new Integer(2)); layerpane.add(this.addButtons(),new Integer(0)); setLayout(null); setOpaque(false); addMouseListener(this); addMouseMotionListener(this); setFocusable(true); addKeyListener(this); System.out.println(isFocusable()); setBorder(BorderFactory.createLineBorder(Color.black)); } public void paintComponent(Graphics g) { try { super.paintComponent(g); g.drawImage(image, 0, 0, this); Graphics2D g2 = (Graphics2D)g; if(color!=null) g2.setPaint(color); if(start!=null && end!=null) { if(selected==("elipse")) g2.drawOval(start.x, start.y,(end.x-start.x),(end.y-start.y)); else if(selected==("rect")) g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("line")) g2.drawLine(start.x,start.y,end.x,end.y); else if(selected==("poly")) g2.drawPolygon(x,y,2); } } catch(Exception e) {} } //Function to draw the shape on image public void draw() { Graphics2D g2 = image.createGraphics(); g2.setPaint(color); if(start!=null && end!=null) { if(selected=="line") g2.drawLine(start.x, start.y, end.x, end.y); else if(selected=="elipse") g2.drawOval(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected=="rect") g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("poly")) g2.drawPolygon(x,y,2); } if(label!=null) { JTextArea textarea=new JTextArea(); if(selected==("text")) { textarea.setBounds(label.x, label.y, 50, 50); textarea.setMaximumSize(new Dimension(100,100)); textarea.setBackground(new Color(237,237,237)); add(textarea); g2.drawString("key",label.x,label.y); } } start=null; repaint(); g2.dispose(); } public void text() { System.out.println(label); } //Function which provides the erase functionality public void erase() { Graphics2D pic=(Graphics2D) image.getGraphics(); Color erasecolor=new Color(237,237,237); pic.setPaint(erasecolor); if(start!=null) pic.fillRect(start.x, start.y, 10, 10); } //To set the size of the image public void setWidth(int x,int y) { System.out.println("("+x+","+y+")"); w=x; h=y; image = new BufferedImage(w, h, BufferedImage.TYPE_INT_ARGB); } //Function to add buttons into the panel, calling this function returns a panel public JPanel addButtons() { JPanel buttonpanel=new JPanel(); buttonpanel.setMaximumSize(new Dimension(70,70)); JPanel shape=new JPanel(); JPanel colourbox=new JPanel(); shape.setLayout(new GridLayout(4,2)); shape.setMaximumSize(new Dimension(70,140)); colourbox.setLayout(new GridLayout(3,3)); colourbox.setMaximumSize(new Dimension(70,70)); buttonpanel.setLayout(new BoxLayout(buttonpanel,BoxLayout.Y_AXIS)); elipse.addActionListener(this); elipse.setToolTipText("Elipse"); rectangle.addActionListener(this); rectangle.setToolTipText("Rectangle"); line.addActionListener( this); line.setToolTipText("Line"); erase.addActionListener(this); erase.setToolTipText("Eraser"); roundrect.addActionListener(this); roundrect.setToolTipText("Round rect"); polygon.addActionListener(this); polygon.setToolTipText("Polygon"); text.addActionListener(this); text.setToolTipText("Text"); shape.add(elipse); shape.add(rectangle); shape.add(line); shape.add(erase); shape.add(roundrect); shape.add(polygon); shape.add(text); buttonpanel.add(shape); for(int i=0;i<9;i++) { colourbutton[i]=new JButton(); colourbox.add(colourbutton[i]); if(i==0) colourbutton[0].setBackground(Color.black); else if(i==1) colourbutton[1].setBackground(Color.white); else if(i==2) colourbutton[2].setBackground(Color.red); else if(i==3) colourbutton[3].setBackground(Color.orange); else if(i==4) colourbutton[4].setBackground(Color.blue); else if(i==5) colourbutton[5].setBackground(Color.green); else if(i==6) colourbutton[6].setBackground(Color.pink); else if(i==7) colourbutton[7].setBackground(Color.magenta); else if(i==8) colourbutton[8].setBackground(Color.cyan); colourbutton[i].addActionListener(this); } buttonpanel.add(colourbox); buttonpanel.setBounds(0, 0, 70, 210); return buttonpanel; } public void mouseClicked(MouseEvent e) { if(selected=="text") { label=new Point(); label=e.getPoint(); draw(); } } @Override public void mouseEntered(MouseEvent arg0) { } public void mouseExited(MouseEvent arg0) { } public void mousePressed(MouseEvent e) { if(selected=="line"||selected=="erase"||selected=="text") { start=e.getPoint(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { mp = e.getPoint(); } else if(selected=="poly") { x[0]=e.getX(); y[0]=e.getY(); } } public void mouseReleased(MouseEvent e) { if(start!=null) { if(selected=="line") { end=e.getPoint(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); } else if(selected=="poly") { x[1]=e.getX(); y[1]=e.getY(); } draw(); } } public void mouseDragged(MouseEvent e) { if(end==null) end = new Point(); if(start==null) start = new Point(); if(selected=="line") { end=e.getPoint(); } else if(selected=="erase") { start=e.getPoint(); erase(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { start.x = Math.min(mp.x,e.getX()); start.y = Math.min(mp.y,e.getY()); end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); } else if(selected=="poly") { x[1]=e.getX(); y[1]=e.getY(); } repaint(); } public void mouseMoved(MouseEvent arg0) {} public void actionPerformed(ActionEvent e) { if(e.getSource()==elipse) selected="elipse"; else if(e.getSource()==line) selected="line"; else if(e.getSource()==rectangle) selected="rect"; else if(e.getSource()==erase) { selected="erase"; System.out.println(selected); erase(); } else if(e.getSource()==roundrect) selected="rrect"; else if(e.getSource()==polygon) selected="poly"; else if(e.getSource()==text) selected="text"; if(e.getSource()==colourbutton[0]) color=Color.black; else if(e.getSource()==colourbutton[1]) color=Color.white; else if(e.getSource()==colourbutton[2]) color=Color.red; else if(e.getSource()==colourbutton[3]) color=Color.orange; else if(e.getSource()==colourbutton[4]) color=Color.blue; else if(e.getSource()==colourbutton[5]) color=Color.green; else if(e.getSource()==colourbutton[6]) color=Color.pink; else if(e.getSource()==colourbutton[7]) color=Color.magenta; else if(e.getSource()==colourbutton[8]) color=Color.cyan; } @Override public void keyPressed(KeyEvent e) { System.out.println("pressed"); } @Override public void keyReleased(KeyEvent e) { System.out.println("key released"); } @Override public void keyTyped(KeyEvent e) { System.out.println("Typed"); } public static void main(String[] a) { new Paper(); } } class Button extends JButton { String name; public Button(String name) { this.name=name; } public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2 = (Graphics2D)g; g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON); //g2.setStroke(new BasicStroke(1.2f)); if (name == "line") g.drawLine(5,5,30,30); if (name == "elipse") g.drawOval(5,7,25,20); if (name== "rect") g.drawRect(5,5,25,23); if (name== "roundrect") g.drawRoundRect(5,5,25,23,10,10); int a[]=new int[]{20,9,20,23,20}; int b[]=new int[]{9,23,25,20,9}; if (name== "poly") g.drawPolyline(a, b, 5); if (name== "text") g.drawString("Text",5, 22); } }

    Read the article

  • What would you suggest as a high school first language?

    - by ldigas
    Edit by OA: After reading some answers I'll just update the question a little. At first I put it a little bluntly, but some of those gave me some good arguments which have to be taken into consideration while making a stand on this one. (these are mostly picked up from comments and answers below). A few things to take into account: to many pupils this is a first programming language - at this stage most of them have trouble grasping a difference between data types, variable passing, ... and whatnot, less alone pointers and similar 'low level stuff' :) they will all have to pass this to get into next grade (well, big majority of them anyway) not all of them have computers at home, not all of them are willing to learn this, less alone interested in - so the concepts have to be taught on a finite time scale in school hours (as well as practice on computers) free literature is a bonus - the teacher will make some scripts and handaways, but still ... I wouldn't like to bear the parents with the burden of buying expensive literature (also, english is not a native language here ... and although they are all learning it, their ability to read it fluently is somewhat questionable) somebody gave an argument - "a language which does not get in the way of ideas" - good one accessibility on different platforms in not expecially important at this point - although most of the suggested ones are available on win as well as linux - not many macs in this part of europe (their prices are sky high for anything but specialised usage) I will check what are the licencing issues on ms express editions about using it massively in high schools for purposes like this - if someone has any info about this, please, do not be shy with it :) A friend of mine, informatics teacher - in EU it comes as something as junior cs teacher, in a local high school asked me what I thought about what should be the first language pupils should be taught? It is a technical school (a little more oriented towards mathematics than the gymnasium, but not computer oriented totally). So I'm asking you - what do you think should be the first language pupils are exposed to in highschool? They have been teaching Pascal so far, but she's not sure that's a good course. She thought about switching to C (which I resented; considering not all pupils have interests in programming, to start with, and should be taught something higher level since they are just gripping the idea of a loop and such ... for a start), I suggested python or ruby (preferably py since it handles all paradigms). What is your opinion on this one? I looked, but didn't find a similar question on SO, so if there is one, please just point me towards it. Edit: The assumption is that none of the pupils have been exposed to any programming in junior school. See also: What is the best way to teach young kids some basic programming concepts? Best ways to teach a beginner to program How and when do you teach a kid to code What is the easiest language to start with? High School Programming

    Read the article

  • Coping with feelings of technical mediocrity

    - by Karim
    As I've progressed as a programmer, I noticed more nuance and areas I could study in depth. In part, I've come to think of myself from, at one point, a "guru" to now much less, even mediocre or inadequate. Is this normal, or is it a sign of a destructive excessive ambition? Background I started to program when I was still a kid, I had about 10 or 11 years. I really enjoy my work and never get bored from it. It's amazing how somebody could be paid for what he really likes to do and would be doing it anyway even for free. When I first started to program, I was feeling proud of what I was doing, each application I built was for me a success and after 2-3 year I had a feeling that I'm a coding guru. It was a nice feeling. ;-) But the more I was in the field and the more types of software I started to develop, I was starting to have a feeling that I'm completely wrong in thinking I'm a guru. I felt that I'm not even a mediocre developer. Each new field I start to work on is giving me this feeling. Like when I once developed a device driver for a client, I saw how much I need to learn about device drivers. When I developed a video filter for an application, I saw how much do I still need to learn about DirectShow, Color Spaces, and all the theory behind that. The worst thing was when I started to learn algorithms. It was several years ago. I knew then the basic structures and algorithms like the sorting, some types of trees, some hashtables, strings, etc. and when I really wanted to learn a group of structures I learned about 5-6 new types and saw that in fact even this small group has several hundred subtypes of structures. It's depressing how little time people have in their lives to learn all this stuff. I'm now a software developer with about 10 years of experience and I still feel that I'm not a proficient developer when I think about things that others do in the industry.

    Read the article

  • Thread sleep and thread join.

    - by Dhruv Gairola
    hi guys, if i put a thread to sleep in a loop, netbeans gives me a caution saying Invoking Thread.sleep in loop can cause performance problems. However, if i were to replace the sleep with join, no such caution is given. Both versions compile and work fine tho. My code is below (check the last few lines for "Thread.sleep() vs t.join()"). public class Test{ //Display a message, preceded by the name of the current thread static void threadMessage(String message) { String threadName = Thread.currentThread().getName(); System.out.format("%s: %s%n", threadName, message); } private static class MessageLoop implements Runnable { public void run() { String importantInfo[] = { "Mares eat oats", "Does eat oats", "Little lambs eat ivy", "A kid will eat ivy too" }; try { for (int i = 0; i < importantInfo.length; i++) { //Pause for 4 seconds Thread.sleep(4000); //Print a message threadMessage(importantInfo[i]); } } catch (InterruptedException e) { threadMessage("I wasn't done!"); } } } public static void main(String args[]) throws InterruptedException { //Delay, in milliseconds before we interrupt MessageLoop //thread (default one hour). long patience = 1000 * 60 * 60; //If command line argument present, gives patience in seconds. if (args.length > 0) { try { patience = Long.parseLong(args[0]) * 1000; } catch (NumberFormatException e) { System.err.println("Argument must be an integer."); System.exit(1); } } threadMessage("Starting MessageLoop thread"); long startTime = System.currentTimeMillis(); Thread t = new Thread(new MessageLoop()); t.start(); threadMessage("Waiting for MessageLoop thread to finish"); //loop until MessageLoop thread exits while (t.isAlive()) { threadMessage("Still waiting..."); //Wait maximum of 1 second for MessageLoop thread to //finish. /*******LOOK HERE**********************/ Thread.sleep(1000);//issues caution unlike t.join(1000) /**************************************/ if (((System.currentTimeMillis() - startTime) > patience) && t.isAlive()) { threadMessage("Tired of waiting!"); t.interrupt(); //Shouldn't be long now -- wait indefinitely t.join(); } } threadMessage("Finally!"); } } As i understand it, join waits for the other thread to complete, but in this case, arent both sleep and join doing the same thing? Then why does netbeans throw the caution?

    Read the article

  • Is there a programming language with be semantics close to English ?

    - by ivo s
    Most languages allow to 'tweek' to certain extend parts of the syntax (C++,C#) and/or semantics that you will be using in your code (Katahdin, lua). But I have not heard of a language that can just completely define how your code will look like. So isn't there some language which already exists that has such capabilities to override all syntax & define semantics ? Example of what I want to do is basically from the C# code below: foreach(Fruit fruit in Fruits) { if(fruit is Apple) { fruit.Price = fruit.Price/2; } } I want do be able to to write the above code in my perfect language like this: Check if any fruits are Macintosh apples and discount the price by 50%. The advantages that come to my mind looking from a coder's perspective in this "imaginary" language are: It's very clear what is going on (self descriptive) - it's plain English after all even kid would understand my program Hides all complexities which I have to write in C#. But why should I care to learn that if statements, arithmetic operators etc since there are already implemented The disadvantages that I see for a coder who will maintain this program are: Maybe you would express this program differently from me so you may not get all the information that I've expressed in my sentence Programs can be quite verbose and hard to debug but if possible to even proximate this type of syntax above maybe more people would start programming right? That would be amazing I think. I can go to work and just write an essay to draw a square on a winform like this: Create a form called MyGreetingForm. Draw a square with in the middle of MyGreetingFormwith a side of 100 points. In the middle of the square write "Hello! Click here to continue" in Arial font. In the above code the parser must basically guess that I want to use the unnamed square from the previous sentence, it'd be hard to write such a smart parser I guess, yet it's so simple what I want to do. If the user clicks on square in the middle of MyGreetingForm show MyMainForm. In the above code 'basically' the compiler must: 1)generate an event handler 2) check if there is any square in the middle of the form and if there is - 3) hide the form and show another form It looks very hard to do but it doesn't look impossible IMO to me at least approximate this (I can personally generate a parser to perform the 3 steps above np & it's basically the same that it has to do any way when you add even in c# a.MyEvent=+handler; so I don't see a problem here) so I'm thinking maybe somebody already did something like this ? Or is there some practical burden of complexity to create such a 'essay style' programming language which I can't see ? I mean what's the worse that can happen if the parser is not that good? - your program will crash so you have to re-word it:)

    Read the article

  • C Named pipe (fifo). Parent process gets stuck

    - by Blitzkr1eg
    I want to make a simple program, that fork, and the child writes into the named pipe and the parent reads and displays from the named pipe. The problem is that it enters the parent, does the first printf and then it gets weird, it doesn't do anything else, does not get to the second printf, it just ways for input in the console. #include <string.h> #include <stdlib.h> #include <stdio.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> void main() { char t[100]; mkfifo("myfifo",777); pid_t pid; pid = fork(); if (pid==0) { //execl("fifo2","fifo2",(char*)0); char r[100]; printf("scrie2->"); scanf("%s",r); int fp; fp = open("myfifo",O_WRONLY); write(fp,r,99); close(fp); printf("exit kid \n"); exit(0); } else { wait(0); printf("entered parent \n"); // <- this it prints // whats below this line apparently its not being executed int fz; printf("1"); fz = open("myfifo",O_RDONLY); printf("2"); printf("fd: %d",fz); char p[100]; int size; printf("------"); //struct stat *info; //stat("myfifo",info); printf("%d",(*info).st_size); read(fz,p,99); close(fz); printf("%s",p); printf("exit"); exit(0); } }

    Read the article

  • Blending the Sketchflow Action

    - by GeekAgilistMercenary
    Started a new Sketchflow Prototype in Expression Blend recently and documented each of the steps.  This blog entry covers some of those steps, which are the basic elements of any prototype.  I will have more information regarding design, prototype creation, and the process of the initial phases for development in the future.  For now, I hope you enjoy this short walk through.  Also, be sure to check out my last quick entry on Sketchflow. I started off with a Sketchflow Project, just like I did in my previous entry (more specifics in that entry about how to manipulate and build out the Sketchflow Map). Once I created the project I setup the following Sketchflow Map. The CoreNavigation is a ComponentScreen setup solely for the page navigation at the top of the screen.  The XAML markup in case you want to create a Component Screen with the same design is included below. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" xmlns:pb="clr-namespace:Microsoft.Expression.Prototyping.Behavior;assembly=Microsoft.Expression.Prototyping.Interactivity" x:Class="RapidPrototypeSketchScreens.CoreNavigation" d:DesignWidth="624" d:DesignHeight="49" Height="49" Width="624">   <Grid x:Name="LayoutRoot"> <TextBlock HorizontalAlignment="Stretch" Margin="307,3,0,0" Style="{StaticResource TitleCenter-Sketch}" Text="Aütøchart Scorecards" TextWrapping="Wrap"> <i:Interaction.Triggers> <i:EventTrigger EventName="MouseLeftButtonDown"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1"/> </i:EventTrigger> </i:Interaction.Triggers> </TextBlock> <Button HorizontalAlignment="Left" Margin="164,8,0,11" Style="{StaticResource Button-Sketch}" Width="144" Content="Scorecard"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_2"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> <Button HorizontalAlignment="Left" Margin="8,8,0,11" Style="{StaticResource Button-Sketch}" Width="152" Content="Standard Reports"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_1"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> </Grid> </UserControl> Now that the CoreNavigation Component Screen is done I built out each of the others.  In each of those screens I included the CoreNavigation Screen (all those little green lines in the image) as the top navigation.  In order to do that, as I created each of the pages I would hover over the CoreNavigation Object in the Sketchflow Map.  When the utilities drawer (the small menu that pops down under a node when you hover over it) shows click on the third little icon and drag it onto the page node you want a navigation screen on. Once I created all the screens I setup the navigation by opening up each screen and right clicking on the objects that needed to point to somewhere else in the prototype. Once I was done with the main page, my Home Navigation Page, it looked something like this in the Expression Blend Designer. I fleshed out each of the additional screens.  Once I was done I wanted to try out the deployment package.  The way to deploy a Sketchflow Prototype is to merely click on File –> Package SketchFlow Project and a prompt will appear.  In the prompt enter what you want the package to be called. I like to see the files generated afterwards too, so I checked the box to see that.  When Expression Blend is done generating everything you’ll have a directory like the one shown below, with all the needed files for deployment. Now these files can be copied or moved to any location for viewing.  One can even copy them (such as via FTP) to a server location to share with others.  Once they are deployed and you run the "TestPage.html" the other features of the Sketchflow Package are available. In the image below I have tagged a few sections to show the Sketchflow Player Features.  To the top left is the navigation, which provides a clearly defined area of movement in a list.  To the center right is the actual prototype application.  I have placed lists of things and made edits.  On the left hand side is the highlight feature, which is available in the Feedback section of the lower left.  On the right hand list I underlined the Autochart with an orange marker, and marked out two list items with a red marker. In the lower left hand side in the Feedback section is also an area to type in your feedback.  This can be useful for time based feedback, when you post this somewhere and want people to provide subsequent follow up feedback. Overall lots of great features, that enable some fairly rapid prototyping with customers.  Once one is familiar with the steps and parts of this Sketchflow Prototype Capabilities it is easy to step through an application without even stopping.  It really is that easy.  So get hold of Expression Blend 3 and get ramped up on Sketchflow, it will pay off in the design phases to do so! Original Entry

    Read the article

  • Parallelism in .NET – Part 12, More on Task Decomposition

    - by Reed
    Many tasks can be decomposed using a Data Decomposition approach, but often, this is not appropriate.  Frequently, decomposing the problem into distinctive tasks that must be performed is a more natural abstraction. However, as I mentioned in Part 1, Task Decomposition tends to be a bit more difficult than data decomposition, and can require a bit more effort.  Before we being parallelizing our algorithm based on the tasks being performed, we need to decompose our problem, and take special care of certain considerations such as ordering and grouping of tasks. Up to this point in this series, I’ve focused on parallelization techniques which are most appropriate when a problem space can be decomposed by data.  Using PLINQ and the Parallel class, I’ve shown how problem spaces where there is a collection of data, and each element needs to be processed, can potentially be parallelized. However, there are many other routines where this is not appropriate.  Often, instead of working on a collection of data, there is a single piece of data which must be processed using an algorithm or series of algorithms.  Here, there is no collection of data, but there may still be opportunities for parallelism. As I mentioned before, in cases like this, the approach is to look at your overall routine, and decompose your problem space based on tasks.  The idea here is to look for discrete “tasks,” individual pieces of work which can be conceptually thought of as a single operation. Let’s revisit the example I used in Part 1, an application startup path.  Say we want our program, at startup, to do a bunch of individual actions, or “tasks”.  The following is our list of duties we must perform right at startup: Display a splash screen Request a license from our license manager Check for an update to the software from our web server If an update is available, download it Setup our menu structure based on our current license Open and display our main, welcome Window Hide the splash screen The first step in Task Decomposition is breaking up the problem space into discrete tasks. This, naturally, can be abstracted as seven discrete tasks.  In the serial version of our program, if we were to diagram this, the general process would appear as: These tasks, obviously, provide some opportunities for parallelism.  Before we can parallelize this routine, we need to analyze these tasks, and find any dependencies between tasks.  In this case, our dependencies include: The splash screen must be displayed first, and as quickly as possible. We can’t download an update before we see whether one exists. Our menu structure depends on our license, so we must check for the license before setting up the menus. Since our welcome screen will notify the user of an update, we can’t show it until we’ve downloaded the update. Since our welcome screen includes menus that are customized based off the licensing, we can’t display it until we’ve received a license. We can’t hide the splash until our welcome screen is displayed. By listing our dependencies, we start to see the natural ordering that must occur for the tasks to be processed correctly. The second step in Task Decomposition is determining the dependencies between tasks, and ordering tasks based on their dependencies. Looking at these tasks, and looking at all the dependencies, we quickly see that even a simple decomposition such as this one can get quite complicated.  In order to simplify the problem of defining the dependencies, it’s often a useful practice to group our tasks into larger, discrete tasks.  The goal when grouping tasks is that you want to make each task “group” have as few dependencies as possible to other tasks or groups, and then work out the dependencies within that group.  Typically, this works best when any external dependency is based on the “last” task within the group when it’s ordered, although that is not a firm requirement.  This process is often called Grouping Tasks.  In our case, we can easily group together tasks, effectively turning this into four discrete task groups: 1. Show our splash screen – This needs to be left as its own task.  First, multiple things depend on this task, mainly because we want this to start before any other action, and start as quickly as possible. 2. Check for Update and Download the Update if it Exists - These two tasks logically group together.  We know we only download an update if the update exists, so that naturally follows.  This task has one dependency as an input, and other tasks only rely on the final task within this group. 3. Request a License, and then Setup the Menus – Here, we can group these two tasks together.  Although we mentioned that our welcome screen depends on the license returned, it also depends on setting up the menu, which is the final task here.  Setting up our menus cannot happen until after our license is requested.  By grouping these together, we further reduce our problem space. 4. Display welcome and hide splash - Finally, we can display our welcome window and hide our splash screen.  This task group depends on all three previous task groups – it cannot happen until all three of the previous groups have completed. By grouping the tasks together, we reduce our problem space, and can naturally see a pattern for how this process can be parallelized.  The diagram below shows one approach: The orange boxes show each task group, with each task represented within.  We can, now, effectively take these tasks, and run a large portion of this process in parallel, including the portions which may be the most time consuming.  We’ve now created two parallel paths which our process execution can follow, hopefully speeding up the application startup time dramatically. The main point to remember here is that, when decomposing your problem space by tasks, you need to: Define each discrete action as an individual Task Discover dependencies between your tasks Group tasks based on their dependencies Order the tasks and groups of tasks

    Read the article

  • Knockoutjs - stringify to handling observables and custom events

    - by Renso
    Goal: Once you viewmodel has been built and populated with data, at some point it goal of it all is to persist the data to the database (or some other media). Regardless of where you want to save it, your client-side viewmodel needs to be converted to a JSON string and sent back to the server. Environment considerations: jQuery 1.4.3+ Knockoutjs version 1.1.2   How to: So let’s set the stage, you are using Knockoutjs and you have a viewmodel with some Knockout dependencies. You want to make sure it is in the proper JSON format and via ajax post it to the server for persistence.   First order of business is to deal with the viewmodel (JSON) object. To most the JSON stringifier sounds familiar. The JSON stringifier converts JavaScript data structures into JSON text. JSON does not support cyclic data structures, so be careful to not give cyclical structures to the JSON stringifier. You may ask, is this the best way to do it? What about those observables and other Knockout properties that I don’t want to persist or want their actual value persisted and not their function, etc. Not sure if you were aware, but KO already has a method; ko.utils.stringifyJson() - it's mostly just a wrapper around JSON.stringify. (which is native in some browsers, and can be made available by referencing json2.js in others). What does it do that the regular stringify does not is that it automatically converts observable, dependentObservable, or observableArray to their underlying value to JSON. Hold on! There is a new feature in this version of Knockout, the ko.toJSON. It is part of the core library and it will clone the view model’s object graph, so you don’t mess it up after you have stringified  it and unwrap all its observables. It's smart enough to avoid reference cycles. Since you are using the MVVM pattern it would assume you are not trying to reference DOM nodes from your view. Wait a minute. I can already see this info on the http://knockoutjs.com/examples/contactsEditor.html website, why mention it all here? First of this is a much nicer blog, no orange ? At this time, you may want to have a look at the blog and see what I am talking about. See the save event, how they stringify the view model’s contacts only? That’s cool but what if your view model is a representation of your object you want to persist, meaning it has no property that represents the json object you want to persist, it is the view model itself. The example in http://knockoutjs.com/examples/contactsEditor.html assumes you have a list of contacts you may want to persist. In the example here, you want to persist the view model itself. The viewmodel here looks something like this:     var myViewmodel = {         accountName: ko.observable(""),         accountType: ko.observable("Active")     };     myViewmodel.isItActive = ko.dependentObservable(function () {         return myViewmodel.accountType() == "Active";     });     myViewmodel.clickToSaveMe = function() {         SaveTheAccount();     }; Here is the function in charge of saving the account: Function SaveTheAccount() {     $.ajax({         data: ko.toJSON(viewmodel),         url: $('#ajaxSaveAccountUrl').val(),         type: "POST",         dataType: "json",         async: false,         success: function (result) {             if (result && result.Success == true) {                 $('#accountMessage').html('<span class="fadeMyContainerSlowly">The account has been saved</span>').show();                 FadeContainerAwaySlowly();             }         },         error: function (xmlHttpRequest, textStatus, errorThrown) {             alert('An error occurred: ' + errorThrown);         }     }); //ajax }; Try run this and your browser will eventually freeze up or crash. Firebug will tell you that you have a repetitive call to the first function call in your model that keeps firing infinitely.  What is happening is that Knockout serializes the view model to a JSON string by traversing the object graph and firing off the functions, again-and-again. Not sure why it does that, but it does. So what is the work around: Nullify your function calls and then post it:         var lightweightModel = viewmodel.clickToSaveMe = null;         data: ko.toJSON(lightweightModel), So then I traced the JSON string on the server and found it having issues with primitive types. C#, by the way. So I changed ko.toJSON(model) to ko.toJS(model), and that solved my problem. Of course you could just create a property on the viewmodel for the account itself, so you only have to serialize the property and not the entire viewmodel. If that is an option then that would be the way to go. If your view model contains other properties in the view model that you also want to post then that would not be an option and then you’ll know what to watch out for. Hope this helps.

    Read the article

  • SQL Saturday #44 Huntington Beach Recap

    What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach.  It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location.  I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis).  It made me think about this: Price of all those cars: $ 150,000+.  Impacting the ability of people to learn: Priceless.  We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well.  That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • What is the most efficient way to convert to binary and back in C#?

    - by Saad Imran.
    I'm trying to write a general purpose socket server for a game I'm working on. I know I could very well use already built servers like SmartFox and Photon, but I wan't to go through the pain of creating one myself for learning purposes. I've come up with a BSON inspired protocol to convert the the basic data types, their arrays, and a special GSObject to binary and arrange them in a way so that it can be put back together into object form on the client end. At the core, the conversion methods utilize the .Net BitConverter class to convert the basic data types to binary. Anyways, the problem is performance, if I loop 50,000 times and convert my GSObject to binary each time it takes about 5500ms (the resulting byte[] is just 192 bytes per conversion). I think think this would be way too slow for an MMO that sends 5-10 position updates per second with a 1000 concurrent users. Yes, I know it's unlikely that a game will have a 1000 users on at the same time, but like I said earlier this is supposed to be a learning process for me, I want to go out of my way and build something that scales well and can handle at least a few thousand users. So yea, if anyone's aware of other conversion techniques or sees where I'm loosing performance I would appreciate the help. GSBitConverter.cs This is the main conversion class, it adds extension methods to main datatypes to convert to the binary format. It uses the BitConverter class to convert the base types. I've shown only the code to convert integer and integer arrays, but the rest of the method are pretty much replicas of those two, they just overload the type. public static class GSBitConverter { public static byte[] ToGSBinary(this short value) { return BitConverter.GetBytes(value); } public static byte[] ToGSBinary(this IEnumerable<short> value) { List<byte> bytes = new List<byte>(); short length = (short)value.Count(); bytes.AddRange(length.ToGSBinary()); for (int i = 0; i < length; i++) bytes.AddRange(value.ElementAt(i).ToGSBinary()); return bytes.ToArray(); } public static byte[] ToGSBinary(this bool value); public static byte[] ToGSBinary(this IEnumerable<bool> value); public static byte[] ToGSBinary(this IEnumerable<byte> value); public static byte[] ToGSBinary(this int value); public static byte[] ToGSBinary(this IEnumerable<int> value); public static byte[] ToGSBinary(this long value); public static byte[] ToGSBinary(this IEnumerable<long> value); public static byte[] ToGSBinary(this float value); public static byte[] ToGSBinary(this IEnumerable<float> value); public static byte[] ToGSBinary(this double value); public static byte[] ToGSBinary(this IEnumerable<double> value); public static byte[] ToGSBinary(this string value); public static byte[] ToGSBinary(this IEnumerable<string> value); public static string GetHexDump(this IEnumerable<byte> value); } Program.cs Here's the the object that I'm converting to binary in a loop. class Program { static void Main(string[] args) { GSObject obj = new GSObject(); obj.AttachShort("smallInt", 15); obj.AttachInt("medInt", 120700); obj.AttachLong("bigInt", 10900800700); obj.AttachDouble("doubleVal", Math.PI); obj.AttachStringArray("muppetNames", new string[] { "Kermit", "Fozzy", "Piggy", "Animal", "Gonzo" }); GSObject apple = new GSObject(); apple.AttachString("name", "Apple"); apple.AttachString("color", "red"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)1.5); GSObject lemon = new GSObject(); apple.AttachString("name", "Lemon"); apple.AttachString("color", "yellow"); apple.AttachBool("inStock", false); apple.AttachFloat("price", (float)0.8); GSObject apricoat = new GSObject(); apple.AttachString("name", "Apricoat"); apple.AttachString("color", "orange"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)1.9); GSObject kiwi = new GSObject(); apple.AttachString("name", "Kiwi"); apple.AttachString("color", "green"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)2.3); GSArray fruits = new GSArray(); fruits.AddGSObject(apple); fruits.AddGSObject(lemon); fruits.AddGSObject(apricoat); fruits.AddGSObject(kiwi); obj.AttachGSArray("fruits", fruits); Stopwatch w1 = Stopwatch.StartNew(); for (int i = 0; i < 50000; i++) { byte[] b = obj.ToGSBinary(); } w1.Stop(); Console.WriteLine(BitConverter.IsLittleEndian ? "Little Endian" : "Big Endian"); Console.WriteLine(w1.ElapsedMilliseconds + "ms"); } Here's the code for some of my other classes that are used in the code above. Most of it is repetitive. GSObject GSArray GSWrappedObject

    Read the article

  • Backpacks and Booth Paint: TechEd 2012

    - by The Un-T Guy
    Arriving in the parking lot of the Orange County Convention Center, I immediately knew I was in the right place. As far as the eye could see, the acres of asphalt were awash in backpacks, quirky (to be kind) outfits, and bad haircuts. This was the place. This was Microsoft Mecca v2012 for geeks and nerds, the Central Florida event of the year, a gathering of high tech professionals whose skills I both greatly respect and, frankly, fear a little. I was wholly and completely out of element, a dork in a vast sea of geek jumbo. It like was wearing dockers and a golf shirt walking into a RenFaire, but one with really crappy costumes and no turkey legs...save those attached to some of the attendees. Of course the corporate whores...errrr, vendors were in place, ready to parlay the convention's fre-nerd-ic energy into millions of dollars by convincing the big-brained and under-sexed in the crowd (i.e., virtually all of them...present company excluded, of course) that their product or service was the only thing standing between them and professional success, industry fame, and clear skin. "With KramTech 2012," they seemed to scream, "you will be THE ROCK STAR of your company's IT department!" As car shows and tattoo parlors learned long ago, Tech companies seem to believe that the best way to attract the attention of this crowd is through the hint of the promise of sex. They recruit and deploy an army of "sales reps" whose primary qualifications appear to be long hair, short skirts, high heels, and a vagina. Unlike their distant cousins in the car and body art industries, however, this sub-species of booth paint (semi-gloss decoration that adds nothing to the substance of the product) seems torn between committing to being all-out sex objects and recognition that they are in the presence of intelligent, discerning people. People who are smart enough to know exactly what these vendors are doing. Also unlike their distant car show and tattoo shop cousins, these young women (what…are there no gay tech professionals who could use some eye candy?) seem to realize that while IT remains a male-dominated field, there are ever-increasing numbers of intelligent, capable, strong professional women – women who’ve battled to make it in this field through hard work and work performance rather than a hard body and performing after work. This is not to say that all of the young female sales reps are there only because of their physical attributes. Many are competent, intelligent, and driven -- not to mention attractive. They're working hard on the front lines of delivering the next generation of technology. The distinction is pretty clear, however, between these young professionals and the booth paint. The former enthusiastically deliver credible information about the products they’re hawking. The latter are positioned in the aisles, uncomfortably avoiding eye contact as they struggle to operate the badge readers. Surprisingly, not all of the women in attendance seemed to object to the objectification of their younger sisters. One IT professional woman who came of age in the industry (mostly in IT marketing) said, “I have no problem with it. I was a ‘booth babe’ for years and it doesn’t bother me at all.” Others, however, weren’t quite so gracious. One woman I spoke with, an IT manager from Cheyenne, Wyoming, said it was demeaning and frankly, as more and more women grow into IT management positions, not a great marketing idea. “Using these young women is, to me, no different than vendors giving out t-shirts to attract attention. It’s sad because it’s still hard for a woman to be respected in the IT field and this just perpetuates the outdated notion that IT is a male-dominated field.” She went on to say that decisions by vendors to employ these young women in this “inappropriate way” could impact her purchasing decisions. “I might be swayed toward a vendor who has women on staff who are intelligent and dynamic rather than the vendors who use the ‘decoration’ girls.” So in many ways, the IT industry is no different than most other industries as it struggles to maximize performance by finding and developing talent – all of the talent, not just the 50% with a penis. Women in IT, like their brethren, struggle to find their niche in the field, to grow professionally, and reach for the brass ring, struggling to overcome obstacles as they climb the mountain of professional success in a never-ending cycle of economic uncertainty. But as (generally) well-educated and highly-trained professionals, they are probably better positioned than those in many other industries. Beside, they’ve got one other advantage over their non-IT counterparts as they attempt their ascent to the summit: They’ve already got the backpacks.

    Read the article

  • Yet another blog about IValueConverter

    - by codingbloke
    After my previous blog on a Generic Boolean Value Converter I thought I might as well blog up another IValueConverter implementation that I use. The Generic Boolean Value Converter effectively converters an input which only has two possible values to one of two corresponding objects.  The next logical step would be to create a similar converter that can take an input which has multiple (but finite and discrete) values to one of multiple corresponding objects.  To put it more simply a Generic Enum Value Converter. Now we already have a tool that can help us in this area, the ResourceDictionary.  A simple IValueConverter implementation around it would create a StringToObjectConverter like so:- StringToObjectConverter using System; using System.Windows; using System.Windows.Data; using System.Linq; using System.Windows.Markup; namespace SilverlightApplication1 {     [ContentProperty("Items")]     public class StringToObjectConverter : IValueConverter     {         public ResourceDictionary Items { get; set; }         public string DefaultKey { get; set; }                  public StringToObjectConverter()         {             DefaultKey = "__default__";         }         public virtual object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             if (value != null && Items.Contains(value.ToString()))                 return Items[value.ToString()];             else                 return Items[DefaultKey];         }         public virtual object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             return Items.FirstOrDefault(kvp => value.Equals(kvp.Value)).Key;         }     } } There are some things to note here.  The bulk of managing the relationship between an object instance and the related string key is handled by the Items property being an ResourceDictionary.  Also there is a catch all “__default__” key value which allows for only a subset of the possible input values to mapped to an object with the rest falling through to the default. We can then set one of these up in Xaml:-             <local:StringToObjectConverter x:Key="StatusToBrush">                 <ResourceDictionary>                     <SolidColorBrush Color="Red" x:Key="Overdue" />                     <SolidColorBrush Color="Orange" x:Key="Urgent" />                     <SolidColorBrush Color="Silver" x:Key="__default__" />                 </ResourceDictionary>             </local:StringToObjectConverter> You could well imagine that in the model being bound these key names would actually be members of an enum.  This still works due to the use of ToString in the Convert method.  Hence the only requirement for the incoming object is that it has a ToString implementation which generates a sensible string instead of simply the type name. I can’t imagine right now a scenario where this converter would be used in a TwoWay binding but there is no reason why it can’t.  I prefer to avoid leaving the ConvertBack throwing an exception if that can be be avoided.  Hence it just enumerates the KeyValuePair entries to find a value that matches and returns the key its mapped to. Ah but now my sense of balance is assaulted again.  Whilst StringToObjectConverter is quite happy to accept an enum type via the Convert method it returns a string from the ConvertBack method not the original input enum type that arrived in the Convert.  Now I could address this by complicating the ConvertBack method and examining the targetType parameter etc.  However I prefer to a different approach, deriving a new EnumToObjectConverter class instead. EnumToObjectConverter using System; namespace SilverlightApplication1 {     public class EnumToObjectConverter : StringToObjectConverter     {         public override object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             string key = Enum.GetName(value.GetType(), value);             return base.Convert(key, targetType, parameter, culture);         }         public override object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             string key = (string)base.ConvertBack(value, typeof(String), parameter, culture);             return Enum.Parse(targetType, key, false);         }     } }   This is a more belts and braces solution with specific use of Enum.GetName and Enum.Parse.  Whilst its more explicit in that the a developer has to  choose to use it, it is only really necessary when using TwoWay binding, in OneWay binding the base StringToObjectConverter would serve just as well. The observant might note that there is actually no “Generic” aspect to this solution in the end.  The use of a ResourceDictionary eliminates the need for that.

    Read the article

  • C#: System.Collections.Concurrent.ConcurrentQueue vs. Queue

    - by James Michael Hare
    I love new toys, so of course when .NET 4.0 came out I felt like the proverbial kid in the candy store!  Now, some people get all excited about the IDE and it’s new features or about changes to WPF and Silver Light and yes, those are all very fine and grand.  But me, I get all excited about things that tend to affect my life on the backside of development.  That’s why when I heard there were going to be concurrent container implementations in the latest version of .NET I was salivating like Pavlov’s dog at the dinner bell. They seem so simple, really, that one could easily overlook them.  Essentially they are implementations of containers (many that mirror the generic collections, others are new) that have either been optimized with very efficient, limited, or no locking but are still completely thread safe -- and I just had to see what kind of an improvement that would translate into. Since part of my job as a solutions architect here where I work is to help design, develop, and maintain the systems that process tons of requests each second, the thought of extremely efficient thread-safe containers was extremely appealing.  Of course, they also rolled out a whole parallel development framework which I won’t get into in this post but will cover bits and pieces of as time goes by. This time, I was mainly curious as to how well these new concurrent containers would perform compared to areas in our code where we manually synchronize them using lock or some other mechanism.  So I set about to run a processing test with a series of producers and consumers that would be either processing a traditional System.Collections.Generic.Queue or a System.Collection.Concurrent.ConcurrentQueue. Now, I wanted to keep the code as common as possible to make sure that the only variance was the container, so I created a test Producer and a test Consumer.  The test Producer takes an Action<string> delegate which is responsible for taking a string and placing it on whichever queue we’re testing in a thread-safe manner: 1: internal class Producer 2: { 3: public int Iterations { get; set; } 4: public Action<string> ProduceDelegate { get; set; } 5: 6: public void Produce() 7: { 8: for (int i = 0; i < Iterations; i++) 9: { 10: ProduceDelegate(“Hello”); 11: } 12: } 13: } Then likewise, I created a consumer that took a Func<string> that would read from whichever queue we’re testing and return either the string if data exists or null if not.  Then, if the item doesn’t exist, it will do a 10 ms wait before testing again.  Once all the producers are done and join the main thread, a flag will be set in each of the consumers to tell them once the queue is empty they can shut down since no other data is coming: 1: internal class Consumer 2: { 3: public Func<string> ConsumeDelegate { get; set; } 4: public bool HaltWhenEmpty { get; set; } 5: 6: public void Consume() 7: { 8: bool processing = true; 9: 10: while (processing) 11: { 12: string result = ConsumeDelegate(); 13: 14: if(result == null) 15: { 16: if (HaltWhenEmpty) 17: { 18: processing = false; 19: } 20: else 21: { 22: Thread.Sleep(TimeSpan.FromMilliseconds(10)); 23: } 24: } 25: else 26: { 27: DoWork(); // do something non-trivial so consumers lag behind a bit 28: } 29: } 30: } 31: } Okay, now that we’ve done that, we can launch threads of varying numbers using lambdas for each different method of production/consumption.  First let's look at the lambdas for a typical System.Collections.Generics.Queue with locking: 1: // lambda for putting to typical Queue with locking... 2: var productionDelegate = s => 3: { 4: lock (_mutex) 5: { 6: _mutexQueue.Enqueue(s); 7: } 8: }; 9:  10: // and lambda for typical getting from Queue with locking... 11: var consumptionDelegate = () => 12: { 13: lock (_mutex) 14: { 15: if (_mutexQueue.Count > 0) 16: { 17: return _mutexQueue.Dequeue(); 18: } 19: } 20: return null; 21: }; Nothing new or interesting here.  Just typical locks on an internal object instance.  Now let's look at using a ConcurrentQueue from the System.Collections.Concurrent library: 1: // lambda for putting to a ConcurrentQueue, notice it needs no locking! 2: var productionDelegate = s => 3: { 4: _concurrentQueue.Enqueue(s); 5: }; 6:  7: // lambda for getting from a ConcurrentQueue, once again, no locking required. 8: var consumptionDelegate = () => 9: { 10: string s; 11: return _concurrentQueue.TryDequeue(out s) ? s : null; 12: }; So I pass each of these lambdas and the number of producer and consumers threads to launch and take a look at the timing results.  Basically I’m timing from the time all threads start and begin producing/consuming to the time that all threads rejoin.  I won't bore you with the test code, basically it just launches code that creates the producers and consumers and launches them in their own threads, then waits for them all to rejoin.  The following are the timings from the start of all threads to the Join() on all threads completing.  The producers create 10,000,000 items evenly between themselves and then when all producers are done they trigger the consumers to stop once the queue is empty. These are the results in milliseconds from the ordinary Queue with locking: 1: Consumers Producers 1 2 3 Time (ms) 2: ---------- ---------- ------ ------ ------ --------- 3: 1 1 4284 5153 4226 4554.33 4: 10 10 4044 3831 5010 4295.00 5: 100 100 5497 5378 5612 5495.67 6: 1000 1000 24234 25409 27160 25601.00 And the following are the results in milliseconds from the ConcurrentQueue with no locking necessary: 1: Consumers Producers 1 2 3 Time (ms) 2: ---------- ---------- ------ ------ ------ --------- 3: 1 1 3647 3643 3718 3669.33 4: 10 10 2311 2136 2142 2196.33 5: 100 100 2480 2416 2190 2362.00 6: 1000 1000 7289 6897 7061 7082.33 Note that even though obviously 2000 threads is quite extreme, the concurrent queue actually scales really well, whereas the traditional queue with simple locking scales much more poorly. I love the new concurrent collections, they look so much simpler without littering your code with the locking logic, and they perform much better.  All in all, a great new toy to add to your arsenal of multi-threaded processing!

    Read the article

  • Who IS Brian Solis?

    - by Michael Snow
    Q: Brian, Welcome to the WebCenter Blog. Can you tell our readers your current role and what career path brought you here? A: I’m proudly serving as a principal analyst at Altimeter Group, a research based advisory firm in Silicon Valley. My career path, well, let’s just say it’s a long and winding road. As a kid, I was fascinated with technology. I learned programming at an early age and found myself naturally drawn to all things tech. I started my career as a database programmer at a technology marketing agency in Southern California. When I saw the chance to work with tech companies and help them better market their capabilities to businesses and consumers, I switched focus from programming to marketing and advertising. As technologist, my approach to marketing was different. I didn’t believe in hype, fluff or buzz words. I believed in translating features into benefits and specifications and capabilities into solutions for real world problems and opportunities. In the mid 90’s I experimented with direct to consumer/customer engagement in dedicated technology forums and boards. I quickly realized that the entire approach to do so would need to change. Therefore, I learned and developed new methods for a more social and informed way of engaging people in ways that helped them, marketed the company, and also tied to tangible benefits for the company. This work would lead me to start an agency in 1999 dedicated to interactive marketing. As I continued to experiment with interactive platforms, I developed interesting methods for converting one-to-many forms of media into one-to-one-to-many programs. I ran that company until joining Altimeter Group. Along the way, in the early 2000s, I realized that everything was changing and that there were others like me finding success in what would become a more social form of media. I dedicated a significant amount of my time to sharing everything that I learned in the form of articles, blogs, and eventually books. My mission became to share my experience with anyone who’d listen. It would later become much bigger than marketing, this would lead to a decade of work, that still continues, in business transformation. Then and now, I find myself always assuming the role of a student. Q: As an industry analyst & technology change evangelist, what are you primarily focused on these days? A: As a digital analyst, I study how disruptive technology impacts business. As an aspiring social scientist, I study how technology affects human behavior. I explore both horizons professionally and personally to better understand the future of popular culture and also the opportunities that exist for organizations to improve relationships and experiences with customers and the people that are important to them. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? A: The line between work and life isn’t blurred it’s been overtly crossed and erased. We live in an always on society. The digital lifestyle keeps us connected to one another it keeps us connected all the time. Whether your sending or checking email, trying to catch up, or simply trying to get ahead, people are spending the equivalent of an extra day at work in the time they spend out of work…working. That’s absurd. It’s a matter of survival. It’s also a matter of unintended, subconscious self-causation. We brought this on ourselves and continue to do so. Think about your day. You’re in meetings for the better part of each day. You probably spend evenings and weekends catching up on email and actually doing the work you couldn’t get to during the day. And, your co-workers and executives are doing the same thing. So if you try to slow down, you find yourself at a disadvantage as you’re willfully pulling yourself out of an unfortunate culture of whenever wherever business dynamics. If you’re unresponsive or unreachable, someone within your organization or on your team is accessible. Over time, this could contribute to unfavorable impressions. I choose to steer my life balance in ways that complement one another. But, I don’t pretend to have this figured out by any means. In fact, I find myself swimming upstream like those around me. It’s essentially a competition for relevance and at some point I’ll learn how to earn attention and relevance while redrawing the line between work and life. Q: How can people keep up with what you’re working on? A: The easy answer is that people can keep up with me at briansolis.com. But, I also try to reach people where their attention is focused. Whether it’s Facebook (facebook.com/briansolis), Twitter (@briansolis), Google+ (+briansolis), Youtube (briansolis.tv) or through books and conferences, people can usually find me in a place of their choosing. Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon? A: I spent some time with the Oracle team reviewing the idea of Digital Darwinism and how technology and society are evolving faster than many organizations can adapt. Digital Darwinism: How Brands Can Survive the Rapid Evolution of Society and Technology Thursday, December 13, 2012, 10 a.m. PT / 1 p.m. ET Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast? A: We’re inviting guests to join us online as we dive into the future of business and how the convergence of technology and connected consumerism would ultimately impact how business is done. It’ll be an exciting and revealing conversation that explores just how much everything is changing. We’ll also review the importance of adapting to emergent trends and how to compete for the future. It’s important to recognize that change is not happening to us, it’s happening because of us. We are part of the revolution and therefore we need to help organizations adapt from the inside out. Watch the Entire Oracle Social Business Thought Leaders Webcast Series On-Demand and Stay Tuned for More to Come in 2013!

    Read the article

  • On Her Majesty's Secret Source Code: .NET Reflector 7 Early Access Builds Now Available

    - by Bart Read
    Dodgy Bond references aside, I'm extremely happy to be able to tell you that we've just released our first .NET Reflector 7 Early Access build. We're going to make these available over the coming weeks via the main .NET Reflector download page at: http://reflector.red-gate.com/Download.aspx Please have a play and tell us what you think in the forum we've set up. Also, please let us know if you run into any problems in the same place. The new version so far comes with numerous decompilation improvements including (after 5 years!) support for iterator blocks - i.e., the yield statement first seen in .NET 2.0. We've also done a lot of work to solidify the support for .NET 4.0. Clive's written about the work he's done to support iterator blocks in much more detail here, along with the odd problem he's encountered when dealing with compiler generated code: http://www.simple-talk.com/community/blogs/clivet/96199.aspx. On the UI front we've started what will ultimately be a rewrite of the entire front-end, albeit broken into stages over two or three major releases. The most obvious addition at the moment is tabbed browsing, which you can see in Figure 1. Figure 1. .NET Reflector's new tabbed decompilation feature. Use CTRL+Click on any item in the assembly browser tree, or any link in the source code view, to open it in a new tab. This isn't by any means finished. I'll be tying up loose ends for the next few weeks, with a major focus on performance and resource usage. .NET Reflector has historically been a largely single-threaded application which has been fine up until now but, as you might expect, the addition of browser-style tabbing has pushed this approach somewhat beyond its limit. You can see this if you refresh the assemblies list by hitting F5. This shows up another problem: we really need to make Reflector remember everything you had open before you refreshed the list, rather than just the last item you viewed - I discovered that it's always done the latter, but it used to hide all panes apart from the treeview after a Refresh, including the decompiler/disassembler window. Ultimately I've got plans to add the whole VS/Chrome/Firefox style ability to drag a tab into the middle of nowhere to spawn a new window, but I need to be mindful of the add-ins, amongst other things, so it's possible that might slip to a 7.5 or 8.0 release. You'll also notice that .NET Reflector 7 now needs .NET 3.5 or later to run. We made this jump because we wanted to offer ourselves a much better chance of adding some really cool functionality to support newer technologies, such as Silverlight and Windows Phone 7. We've also taken the opportunity to start using WPF for UI development, which has frankly been a godsend. The learning curve is practically vertical but, I kid you not, it's just a far better world. Really. Stop using WinForms. Now. Why are you still using it? I had to go back and work on an old WinForms dialog for an hour or two yesterday and it really made me wince. The point is we'll be able to move the UI in some exciting new directions that will make Reflector easier to use whilst continuing to develop its functionality without (and this is key) cluttering the interface. The 3.5 language enhancements should also enable us to be much more productive over the longer term. I know most of you have .NET Fx 3.5 or 4.0 already but, if you do need to install a new version, I'd recommend you jump straight to 4.0 because, for one thing, it's faster, and if you're starting afresh there's really no reason not to. Despite the Fx version jump the Visual Studio add-in should still work fine in Visual Studio 2005, and obviously will continue to work in Visual Studio 2008 and 2010. If you do run into problems, again, please let us know here. As before, we continue to support every edition of Visual Studio exception the Express Editions. Speaking of Visual Studio, we've also been improving the add-in. You can now open and explore decompiled code for any referenced assembly in any project in your solution. Just right-click on the reference, then click Decompile and Explore on the context menu. Reflector will pop up a progress box whilst it decompiles your assembly (Figure 2) - you can move this out of the way whilst you carry on working. Figure 2. Decompilation progress. This isn't modal so you can just move it out of the way and carry on working. Once it's done you can explore your assembly in the Reflector treeview (Figure 3), also accessible via the .NET Reflector Explore Decompiled Assemblies main menu item. Double-click on any item to open decompiled source in the Visual Studio source code view. Use right-click and Go To Definition on the source view context menu to navigate through the code. Figure 3. Using the .NET Reflector treeview within Visual Studio. Double-click on any item to open decompiled source in the source code view. There are loads of other changes and fixes that have gone in, often under the hood, which I don't have room to talk about here, and plenty more to come over the next few weeks. I'll try to keep you abreast of new functionality and changes as they go in. There are a couple of smaller things worth mentioning now though. Firstly, we've reorganised the menus and toolbar in Reflector itself to more closely mirror what you might be used to in other applications. Secondly, we've tried to make some of the functionality more discoverable. For example, you can now switch decompilation target framework version directly from the toolbar - and the default is now .NET 4.0. I think that about covers it for the moment. As I said, please use the new version, and send us your feedback. Here's that download URL again: http://reflector.red-gate.com/Download.aspx. Until next time! Technorati Tags: .net reflector,7,early access,new version,decompilation,tabbing,visual studio,software development,.net,c#,vb

    Read the article

  • Azure, don't give me multiple VMs, give me one elastic VM

    - by FransBouma
    Yesterday, Microsoft revealed new major features for Windows Azure (see ScottGu's post). It all looks shiny and great, but after reading most of the material describing the new features, I still find the overall idea behind all of it flawed: why should I care on how much VMs my web app runs? Isn't that a problem to solve for the Windows Azure engineers / software? And what if I need the file system, why can't I simply get a virtual filesystem ? To illustrate my point, let's use a real example: a product website with a customer system/database and next to it a support site with accompanying database. Both are written in .NET, using ASP.NET and use a SQL Server database each. The product website offers files to download by customers, very simple. You have a couple of options to host these websites: Buy a server, place it in a rack at an ISP and run the sites on that server Use 'shared hosting' with an ISP, which means your sites' appdomains are running on the same machine, as well as the files stored, and the databases are hosted in the same server as the other shared databases. Hire a VM, install your OS of choice at an ISP, and host the sites on that VM, basically the same as the first option, except you don't have a physical server At some cloud-vendor, either host the sites 'shared' or in a VM. See above. With all of those options, scalability is a problem, even the cloud-based ones, though not due to the same reasons: The physical server solution has the obvious problem that if you need more power, you need to buy a bigger server or more servers which requires you to add replication and other overhead Shared hosting solutions are almost always capped on memory usage / traffic and database size: if your sites get too big, you have to move out of the shared hosting environment and start over with one of the other solutions The VM solution, be it a VM at an ISP or 'in the cloud' at e.g. Windows Azure or Amazon, in theory allows scaling out by simply instantiating more VMs, however that too introduces the same overhead problems as with the physical servers: suddenly more than 1 instance runs your sites. If a cloud vendor offers its services in the form of VMs, you won't gain much over having a VM at some ISP: the main problems you have to work around are still there: when you spin up more than one VM, your application must be completely stateless at any moment, including the DB sub system, because what's in memory in instance 1 might not be in memory in instance 2. This might sounds trivial but it's not. A lot of the websites out there started rather small: they were perfectly runnable on a single machine with normal memory and CPU power. After all, you don't need a big machine to run a website with even thousands of users a day. Moving these sites to a multi-VM environment will cause a problem: all the in-memory state they use, all the multi-page transitions they use while keeping state across the transition, they can't do that anymore like they did that on a single machine: state is something of the past, you have to store every byte of state in either a DB or in a viewstate or in a cookie somewhere so with the next request, all state information is available through the request, as nothing is kept in-memory. Our example uses a bunch of files in a file system. Using multiple VMs will require that these files move to a cloud storage system which is mounted in each VM so we don't have to store the files on each VM. This might require different file paths, but this change should be minor. What's perhaps less minor is the maintenance procedure in place on the new type of cloud storage used: instead of ftp-ing into a VM, you might have to update the files using different ways / tools. All in all this makes moving an existing website which was written for an environment that's based around a VM (namely .NET with its CLR) overly cumbersome and problematic: it forces you to refactor your website system to be able to be used 'in the cloud', which is caused by the limited way how e.g. Windows Azure offers its cloud services: in blocks of VMs. Offer a scalable, flexible VM which extends with my needs Instead, cloud vendors should offer simply one VM to me. On that VM I run the websites, store my DB and my files. As it's a virtual machine, how this machine is actually ran on physical hardware (e.g. partitioned), I don't care, as that's the problem for the cloud vendor to solve. If I need more resources, e.g. I have more traffic to my server, way more visitors per day, the VM stretches, like I bought a bigger box. This frees me from the problem which comes with multiple VMs: I don't have any refactoring to do at all: I can simply build my website as if it runs on my local hardware server, upload it to the VM offered by the cloud vendor, install it on the VM and I'm done. "But that might require changes to windows!" Yes, but Microsoft is Windows. Windows Azure is their service, they can make whatever change to what they offer to make it look like it's windows. Yet, they're stuck, like Amazon, in thinking in VMs, which forces developers to 'think ahead' and gamble whether they would need to migrate to a cloud with multiple VMs in the future or not. Which comes down to: gamble whether they should invest time in code / architecture which they might never need. (YAGNI anyone?) So the VM we're talking about, is that a low-level VM which runs a guest OS, or is that VM a different kind of VM? The flexible VM: .NET's CLR ? My example websites are ASP.NET based, which means they run inside a .NET appdomain, on the .NET CLR, which is a VM. The only physical OS resource the sites need is the file system, however this too is accessed through .NET. In short: all the websites see is what .NET allows the websites to see, the world as the websites know it is what .NET shows them and lets them access. How the .NET appdomain is run physically, that's the concern of .NET, not mine. This begs the question why Windows Azure doesn't offer virtual appdomains? Or better: .NET environments which look like one machine but could be physically multiple machines. In such an environment, no change has to be made to the websites to migrate them from a local machine or own server to the cloud to get proper scaling: the .NET VM will simply scale with the need: more memory needed, more CPU power needed, it stretches. What it offers to the application running inside the appdomain is simply increasing, but not fragmented: all resources are available to the application: this means that the problem of how to scale is back to where it should be: with the cloud vendor. "Yeah, great, but what about the databases?" The .NET application communicates with the database server through a .NET ADO.NET provider. Where the database is located is not a problem of the appdomain: the ADO.NET provider has to solve that. I.o.w.: we can host the databases in an environment which offers itself as a single resource and is accessible through one connection string without replication overhead on the outside, and use that environment inside the .NET VM as if it was a single DB. But what about memory replication and other problems? This environment isn't simple, at least not for the cloud vendor. But it is simple for the customer who wants to run his sites in that cloud: no work needed. No refactoring needed of existing code. Upload it, run it. Perhaps I'm dreaming and what I described above isn't possible. Yet, I think if cloud vendors don't move into that direction, what they're offering isn't interesting: it doesn't solve a problem at all, it simply offers a way to instantiate more VMs with the guest OS of choice at the cost of me needing to refactor my website code so it can run in the straight jacket form factor dictated by the cloud vendor. Let's not kid ourselves here: most of us developers will never build a website which needs a truck load of VMs to run it: almost all websites created by developers can run on just a few VMs at most. Yet, the most expensive change is right at the start: moving from one to two VMs. As soon as you have refactored your website code to run across multiple VMs, adding another one is just as easy as clicking a mouse button. But that first step, that's the problem here and as it's right there at the beginning of scaling the website, it's particularly strange that cloud vendors refuse to solve that problem and leave it to the developers to solve that. Which makes migrating 'to the cloud' particularly expensive.

    Read the article

  • Corsair Hackers Reboot

    It wasn't easy for me to attend but it was absolutely worth to go. The Linux User Group of Mauritius (LUGM) organised another get-together for any open source enthusiast here on the island. Strangely named "Corsair Hackers Reboot" but it stands for a positive cause: "Corsair Hackers Reboot Event A collaborative activity involving LUGM, UoM Computer Club, Fortune Way Shopping Mall and several geeks from around the island, striving to put FOSS into homes & offices. The public is invited to discover and explore Free Software & Open Source." And it was a good opportunity for me and the kids to visit the east coast of Mauritius, too. Perfect timing It couldn't have been better... Why? Well, for two important reasons (in terms of IT): End of support for Microsoft Windows XP - 08.04.2014 Release of Ubuntu 14.04 Long Term Support - 17.04.2014 Quite funnily, those two IT dates weren't the initial reasons and only during the weeks of preparations we put those together. And therefore it was even more positive to promote the use of Linux and open source software in general to a broader audience. Getting there ... Thanks to the new motor way M3 and all the additional road work which has been completed recently it was very simple to get across the island in a very quick and relaxed manner. Compared to my trips in the early days of living in Mauritius (and riding on a scooter) it was very smooth and within less than an hour we hit Centrale de Flacq. Well, being in the city doesn't necessarily mean that one has arrived at the destination. But thanks to modern technology I had a quick look on Google Maps, and we finally managed to get a parking behind the huge bus terminal in Flacq. From there it was just a short walk to Fortune Way. The children were trying to count the number of buses... Well, lots and lots of buses - really impressive actually. What was presented? There were different areas set up. Right at the entrance one's attention was directly drawn towards the elevated hacker's stage. Similar to rock stars performing their gig there was bunch of computers, laptops and networking equipment in order to cater the right working conditions for coding/programming challenge(s) on the one hand and for the pen-testing or system hacking competition on the other hand. Personally, I was very impresses that actually Nitin took care of the pen-testing competition. He hardly started one year back with Linux in general, and Kali Linux specifically. Seeing his personal development from absolute newbie to a decent Linux system administrator within such a short period of time, is really impressive. His passion to open source software made him a living. Next, clock-wise seen, was the Kid's Corner with face-painting as the main attraction. Additionally, there were numerous paper print outs to colour. Plus a decent workstation with the educational suite GCompris. Of course, my little ones were into that. They already know GCompris since a while as they are allowed to use it on an IGEL thin client terminal here at home. To simplify my life, I set up GCompris as full-screen guest session on the server, and they can pass the login screen without any further obstacles. And because it's a thin client hooked up to a XDMCP remote session I don't have to worry about the hardware on their desk, too. The next section was the main attraction of the event: BYOD - Bring Your Own Device Well, compared to the usual context of BYOD the corsairs had a completely different intention. Here, you could bring your own laptop and a team of knowledgeable experts - read: geeks and so on - offered to fully convert your system on any Linux distribution of your choice. And even though I came later, I was told that the USB pen drives had been in permanent use. From being prepared via dd command over launching LiveCD session to finally installing a fresh Linux system on bare metal. Most interestingly, I did a similar job already a couple of months ago, while upgrading an existing Windows XP system to Xubuntu 13.10. So far, the female owner is very happy and enjoys her system almost every evening to go shopping online, checking mails, and reading latest news from the Anime world. Back to the Hackers event, Ish told me that they managed approximately 20 conversion during the day. Furthermore, Ajay and others gladly assisted some visitors with some tricky issues and by the end of the day you can call is a success. While I was around, there was a elderly male visitor that got a full-fledged system conversion to a Linux system running completely in French language. A little bit more to the centre it was Yasir's turn to demonstrate his Arduino hardware that he hooked up with an experimental electrical circuit board connected to an LCD matrix display. That's the real spirit of hacking, and he showed some minor adjustments on the fly while demo'ing the system. Also, very interesting there was a thermal sensor around. Personally, I think that platforms like the Arduino as well as the Raspberry Pi have a great potential at a very affordable price in order to bring a better understanding of electronics as well as computer programming to a broader audience. It would be great to see more of those experiments during future activities. And last but not least there were a small number of vendors. Amongst them was Emtel - once again as sponsor of the general internet connectivity - and another hardware supplier from Riche Terre shopping mall. They had a good collection of Android related gimmicks, like a autonomous web cam that can convert any TV with HDMI connector into an online video chat system given WiFi. It's actually kind of awesome to have a Skype or Google hangout video session on the big screen rather than on the laptop. Some pictures of the event LUGM: Great conversations on Linux, open source and free software during the Corsair Hackers Reboot LUGM: Educational workstation running GCompris suite attracted the youngest attendees of the day. Of course, face painting had to be done prior to hacking... LUGM: Nadim demoing some Linux specifics to interested visitors. Everyone was pretty busy during the whole day LUGM: The hacking competition, here pen-testing a wireless connection and access point between multiple machines LUGM: Well prepared workstations to be able to 'upgrade' visitors' machines to any Linux operating system Final thoughts Gratefully, during the preparations of the event I was invited to leave some comments or suggestions, and the team of the LUGM did a great job. The outdoor banner was a eye-catcher, the various flyers and posters for the event were clearly written and as far as I understood from the quick chats I had with Ish, Nadim, Nitin, Ajay, and of course others all were very happy about the event execution. Great job, LUGM! And I'm already looking forward to the next Corsair Hackers Reboot event ... Crossing fingers: Very soon and hopefully this year again :) Update: In the media The event had been announced in local media, too. L'Express: Salon informatique: Hacking Challenge à Flacq

    Read the article

  • I Clobbered a Leopard with a Window Last Night

    - by D'Arcy Lussier
    I’ve had my 15” Mac Book Pro for a little over a year now, and its hands-down the best laptop I’ve ever owned…hardware wise. And I tried, I really really tried, to like OSX. I even bought Parallels so I could run Windows 7 and all my development tools while still trying to live in an OSX world. But in the end, I missed Windows too much. There were just too many shortcomings with OSX that kept me from being productive. For one thing, Office for Mac is *not* Office for Windows. The applications are written by different teams, and Excel on the Mac is just different enough to be painful. The VM experience was adequate, but my MBP would heat up like crazy when running it and the experience trying to get Windows apps to interact with an OSX file system was awkward. And I found I was in the VM more than I thought I’d be. iMovie is not as easy to use for doing simple movie editing as Windows Movie Maker. There’s no free blog editing software for OSX that’s on par with Windows Live Writer. And really, all I was using OSX for was Twitter (which I can use a Windows client for) and web browsing (also something Windows can provide obviously). So I had to ask myself – why am I forcing myself to use an operating system I don’t like, on a laptop that can support Windows 7? And so I paved my MBP and am happily running Windows 7 on it…and its fantastic! All the good stuff with the hardware is still there with the goodness of Win 7. Happy happy. I did run into some snags doing this though, and that’s really what this blog post is about – things to be aware of if you want to install Win 7 directly on your MBP metal. First, Ensure You Have Your Original Mac Install Disk This was a warning my buddy Dylan, who’s been running Win 7 on his MBP for a while now, gave me early on. The reason you need that original disk is that the hardware drivers you need are all located there. Apparently you can’t easily download them, so make sure you have them ahead of time. Second, Forget BootCamp The only reason you need BootCamp is if you still want the option to boot into OSX. If you don’t, then you don’t need BootCamp. In fact, you don’t even need BootCamp to install Win 7. What you *will* need though is a DVD with Win 7 burnt on it. Apple doesn’t support bootable USB drives. Well, actually they do for Mac Book Airs which don’t come with optical drives…but to get it working you’ll need to edit a system file of BootCamp so your make of MBP is included in an XML document, and even then you *still* are using BootCamp meaning you’ll be making an OSX partition. So don’t worry about BootCamp, just burn a Windows 7 disc, put it into the DVD drive, and restart your MBP. Third, Know The Secret Commands So after putting in the Windows 7 DVD and restarting your MBP, you’ll want to hold down the ‘C’ key during boot up. This tells the MBP that it should boot from the DVD drive instead of the hard drive. Interestingly, it appears you don’t have to do this if its the Mac OSX install disc (more on that in a second), but regardless – hold down C and Windows will start the install process. Next up is the partition process. You’ll notice that there’s a partition called ETI or something like that. This has to do with the drive format that Apple uses and how they partition their system drives. What I did – I blew it away! At first I didn’t, but I was told I couldn’t install Windows on the remaining space due to the different drive format. Blowing away the ETI partition (and all other partitions) allowed me to continue the Windows install. *REMEMBER –  No warranty is provided or implied, just telling you what I did and how I got it to work. Ok, so now Windows is installed and I’m rebooting. Everything looks good, but I need drivers! So I put in the OSX install DVD and run the BootCamp assistant which installs all the Windows drivers I need. Fantastic! Oh, I need to restart – no problem. OH NO, PROBLEM! I left the OSX install DVD in the drive and now the MBP wants to boot from the drive and install OSX! I’m not holding down the C key, what the heck?! Ok, well there must be a way to eject this disk…hmm…no physical button on the side…the eject button doesn’t seem to work on the keyboard…no little pin hole to insert something to force the disc out…well what the…?! It turns out, if you want to eject a disc at boot up, you need (and I kid you not) to plug a mouse into the laptop and hold down the right-click button while its booting. This ejected the disc for me. Seriously. Finally, Things You Should Be Aware Of Once you have Windows up and running there’s a few things you need to be aware of, mainly new keyboard shortcuts. For instance, on the Mac keyboard there is no Home, End, PageUp or PageDown. There’s also no obvious way to do something like select large amounts of text (like you would by holding Shift-Home at the end of a line of text for instance). So here’s some shortcuts you need to know: Home – fn + left arrow End – fn + right arrow Select a line of text as you would with the Home key – Shift + fn + left arrow Select a line of text as you would with the End key – Shift + fn + right arrow Page Up – fn + up arrow Page Down – fn + down arrow Also, you’ll notice that the awesome Mac track pad doesn’t respond to taps as clicks. No fear, this is just a setting that needs to be altered in the BootCamp control panel (that controls the Mac Hardware-specific settings within Windows, you can access it easily from the system tray icon) One other thing, battery life seems a bit lower than with OSX, but then again I’m also doing more than Twitter or web browsing on this thing now. Conclusion My laptop runs awesome now that I have Windows 7 on there. It’s obviously up to individual taste, but for me I just didn’t see benefits to living in an OSX world when everything I needed lived in Windows. And also, I finally am back to an operating system that doesn’t require me to eject a USB drive before physically removing it! It’s 2012 folks, how has this not been fixed?! D

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35  | Next Page >