Search Results

Search found 3593 results on 144 pages for 'wake on lan'.

Page 31/144 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• What are the side-effects of disabling the old Lan Manager hash?

  - by Bigbio2002

  All of the computers in our domain are running Windows XP/Server 2003 and above (with one exception, a Win2Ksp4 server, which is not a domain controller). I intend to disable the LM hashes via group policy as indicated in KB299656, and want to ensure that there won't be any unforseen problems or side-effects. Does anyone have experience with performing this change? Are there any caveats that I should keep in mind?

  Read the article

• Gre tunnel Linux Cisco

  - by mezgani

  I've created a GRE tunnel between LAN A and LAN B. LAN A is behind a router, and LAN B is behind a Linux box and this box has a pppoe interface. When i do tcpdump on Linux box i see that the traffic is routerd to Linux box (tunnel end), so my need is routing the tunnel traffic to internet. I've added these rules to my iptables script, and i stay unable to connect to internet from LAN A Permitting Linux to act as router (necessary to forward packets) echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o gre0 -j MASEQUARADE What i've forgot to set in this case?

  Read the article

• How do I get netcat to accept connections from outside the LAN?

  - by Chris

  I'm using netcat as a backend to shovel data back and forth for a program I'm making. I tested my program on the local network, and once it worked I thought it would be a matter of simply forwarding a port from my router to have my program work over the internet. Alas! This seems not to be the case. If I start netcat listening on port 6666 with: nc -vv -l -p 6666, then go to 127.0.0.1:6666 in a browser, as expected I see a HTTP GET request come through netcat (and my browser sits waiting in vain). If I go to my.external.ip.address:6666, however, nothing comes through at all and the browser displays 'could not connect to my.external.ip.address:6666'. I know that the port is correctly forwarded, as www.canyouseeme.org says port 6666 is open (and when netcat is not listening, that its closed). If I run netcat with -g my.adslmodem's.local.address to set the gateway address, I get the same behavior. Am I using this command line option correctly? Any insight as to what I'm doing wrong?

  Read the article

• What could cause my LAN Pings be greater than 100ms?

  - by James Holland

  I have 2 servers (Both: Windows Server 2008, Dual Xeon 2.8Ghz, 32GB RAM, 8 x 15k SAS Drives). One of them is a DC / Web server / Exchange Server, the other is a SQL Server (2008). I have a 48 port Netgear GS748T Gigabit switch. When I ping from server to server, I get ping times <1ms, great, but when I ping from a PC, I get varying pings from the occasional <1ms to 500ms!! If I log into either server and look at Task Manager, CPU usage peaks at 20%, memory usage is 100%, but I am led to believe this is normal as Exchange will just use as much as you have, and release it when requested. Network usage peaks at 1%. I really don't understand how the ping can vary that much. I know I am giving very little info, but this is all I know, I apologise, but can anyone help? In response to question, I have pinged by both IP address and hostname, no difference in ping times.

  Read the article

• Good alternative to NetLimiter(windows) for ubuntu

  - by Harsh

  there is program NetLimiter for windows. while I was using windows it was very useful to me to find out the IP address of ther person who was downloading from me, or to know IP address of any person on lan who was using DC++ with some nick. and after that I can easily know the computer name of that person using nbtstat. I was wondering if there is any tool for ubuntu using which I an find out the IP address of person who is downloading from me or from whom I am downloading on lan. I am on university lan and we are using PtokaX and DC++ for file sharing on lan. people sometimes put some offencive stuff on open chat on DC++ using some Nick and I don't know how to trace them while I am using Ubuntu. Plz help.

  Read the article

• iptables forward rule not working in openwrt

  - by Udit Gupta

  I am trying to apply some iptables forwarding rules in openwrt. Here is my scenario - My server has two cards ath0 and br-lan. br-lan is connected to internet and ath0 to private network. The other m/c in n/w also has ath0 that connects with this server's ath0 and they are able to ping each other. Now, I want other m/c in network to use internet using br-lan of server so I thought of using iptables forwarding rule- Here is what I tried - Server : $ ping 1.1.1.6 // <ath0-ip of client> works fine $ iptables -A FORWARD -i ath0 -o br-lan -j ACCEPT $ /etc/init.d/firewall restart Client : $ ping 1.1.1.5 // <ath0-ip of server> works fine $ ping 132.245.244.60 // <br-lan ip of server> (not working) I am new to iptables stuff and openwrt. What I am doing wrong here ?? Any other help if anyone could suggest for my scenario Edit- m/c - machine n/w - network

  Read the article

• Good alternative to NetLimiter?

  - by Harsh

  There is a program NetLimiter for windows. While I was using Windows it was very useful for me to find out the IP address of the person who was downloading from me, or to know IP address of any person on LAN who was using DC++ with some nick. And after that I can easily know the computer name of that person using nbtstat. I was wondering if there is any tool for Ubuntu using which I can find out the IP address of person who is downloading from me or from whom I am downloading on LAN. I am on university LAN and we are using PtokaX and DC++ for file sharing on LAN. people sometimes put some offencive stuff on open chat on DC++ using some Nick and I don't know how to trace them while I am using Ubuntu.

  Read the article

• My server is behind a router. How can I see my website correctly? [closed]

  - by Tokyo Dan

  I'm running a web server (Ubuntu) on my local home network. I'm behind a router. On the WAN I have a direct IP. When not on my home network and accessing my website via the WAN direct IP my website displays correctly and everything works. On my home LAN behind the router, accessing my website via the WAN direct gets me to my router's admin login page. This is normal. But... Accessing my website (via it's home LAN IP address) from another computer on my home LAN gets me to the website but the layout display is broken and clicking on any link takes me to the WAN direct IP (my router's Admin login page). How can i get my website to display properly and the links to work when accessing it from my home LAN?

  Read the article

• Laptop Randomly Turning On and Off

  - by Ian Mallett

  So, I have a pretty new laptop, and one of its quirks is that, at random times (though typically in the middle of the night), it seems to wake up from sleep mode, churn a bit, and then go back into sleep mode. I write "seems" because its fans are very loud, so it's obvious when it's not asleep, but during the time it is "on", I can't see anything on the screen. I have researched the problem somewhat, and could only find similar issues; nothing identical. In those cases, it appeared that certain devices could be responsible. Nothing is plugged into my computer during this behavior, but I nonetheless disabled every device's permission to wake the computer through the device manager. This included disabling the magic packet wake for the network (despite its only having a wireless connection). Using "powercfg /lastwake" gives an empty wake history. But, I also went through all the tasks and checked if they would wake the computer. None appeared to. The problem persisted, so, after some more research, I found this, and executed it for all power schemes on the computer. The problem persists. System: OS: Windows 7 Professional CPU: Intel 990X GPU: NVIDIA GeForce 580M/12GB RAM Motherboard: Clevo X7200 Model: NP7282-S1 (Sager-built laptop)

  Read the article

• Why can't connect with second computer in same LAN and settings?

  - by user930450

  I'm trying to connect to WLAN with notebook. The notebook works fine with other WLANs. It can authenticate, signal is "very good" but it says "can't access internet". (On Windows it's small yellow exclamation mark on the signal). With other computer exactly in the same location, with the same settings, it's possible to connect. Both are configurated to get IP dynamically. One difference is that the other computer is using "Ralink wireless" instead normal windows client to connect. But does this make a difference? the settings are the same. What could be the reason?

  Read the article

• iptables question

  - by RubyFreak

  i have a small network, with one valid IP and a firewall with 3 network interfaces (LAN, WAN, DMZ). I want to enable PAT on this valid IP to redirect http traffic to a server in my DMZ. (done) I want to enable MASQ on this ip from traffic that comes from my LAN (done) I want from my LAN as well to access my http server at DMZ. (partially) Question: in the above scenario, i cannot from my LAN, to access my http server in the DMZ, since it has the IP used by the MASQ (the only valid ip that i have). What would be the best option to solve this problem? network interfaces: eth0 (WAN) eth1 (DMZ) eth2 (LAN) /sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE /sbin/iptables -A FORWARD --o eth1 -d 2.2.2.2 -p tcp --dport 80 -j ACCEPT /sbin/iptables -t nat -A PREROUTING -i eth0 -d 1.1.1.1 -p tcp --dport 80 -j DNAT --to 2.2.2.2 /sbin/iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT /sbin/iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT /sbin/iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT

  Read the article

• Online File Sharing that acts just like LAN shared drives, etc.

  - by Dayton Brown

  Hi All, Have a small business client that wants to move their current file share to the web. Specs are as follows, 20 to 30 GB of space, file sizes are normal (nothing more than 50 to 100 mb) 3 users ideal solution would be exact same functionality as windows explorer. CHEAP!!! But not super cheap. I would like to keep it around $20 per user per month. I've explored a bunch of solutions, but they are all a bit on the complicated side. Thanks in advance for the recommendations.

  Read the article

• How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

  - by Maharshi Raval

      I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

  Read the article

• Help me hosting Apache server on a LAN connected computers?

  - by akhilesh

  i have build a JSP project,but i really want that other computer connected to my computer can access by website.i have never done it before Please help me.Now my server can be accessed using http://localhost:8080 on my local machine.what are the configuration i need to do please tell me.please post some link or step by step help.

  Read the article

• What is fastest way to backup a disk image over LAN?

  - by David Balažic

  Sometimes I boot sysrescd or a similar live linux on a PC to backup the hardrive over local network to my server. I noticed many times, that the transfer speed is not optimal (slower than HDD and network speed). Any rules of thumb what to do and what to avoid? What I typically do is something like: dd bs=16M if=/dev/sda | nc ... # on client nc ... | dd bs=16M of=/destination/disk/backup1 # on server I also "throw" in lzop (other are way too slow) and sometimes on the fly md5sum calculation (both of uncompressed and compress source). I try to add (m)buffer (or other alternatives) to improve throughput (and get a progress indicator). I noticed that even with enough free CPU, adding commands to the pipeline slows things down. Typically the destination is on a NTFS volume (accessed via ntfs-3g, with the _big_writes_ option).

  Read the article

• It's the ethernet 10/100 in LAN transfer faster than USB 1.0?

  - by dag729

  I have an old laptop (PIII 800MHz, with 256 RAM) that I wish to use as my home server: it'll have to serve just two people, so I think that I'll be more than ok as for the RAM and the CPU. The issue is about data, because the internal hard disk is a 12GB, that is...ridicolous! I have more than 60GB of mixed storage and counting (images, videos and music) in an external usb hd. I could put the hd in my desktop pc just to serve the big files through ethernet or let it inside its usb box attached to the laptop. The question is: which of these solutions will be the fastest? USB 1.0 attached to the server (laptop) or internal hard disk serving files via 10/100 ethernet to the laptop on demand?

  Read the article

• Accessing localhost (xampp) from another computer over LAN network - how to?

  - by vr3690

  I have just set up a wi-fi network at home. I have all my files on my desktop computer (192.168.1.56) and want to access localhost over there from another computer (192.168.1.2). On my desktop I can access localhost through the normal http://localhost. Apache is running on port 80 as usual. Exactly what do I have to do to achieve this? There is documentation on the net but they either don't work or are too fragment and confusing to understand. I think I have to make changes to my apache's httpd.conf file and the hosts file. Any ideas as to what changes to make?

  Read the article

• routing problems

  - by user174050

  I have an windows 7 laptop and I have installed openvpn 2.2x as client. The laptop has 2 ethernet cards, one of them is wireless. The wireless lan is 192.168.1.0/24 The Fix lan is 192.168.2.0/24 If I connect to the openvpn server useing the Fix lan the I can connect properly and for testing I ping to my openvpn server 10.0.0.1 that answers correctly. But if I connect to the openvpn server useing the wireless lan, I can establish the connection but pinging to the server isn´t possible. The packets goes allways lost. Why can this happen? In an other laptop where windows xp is installed and with the same lan configuratio everything works propperly. In both cases the firewall is configured to access the vnc server and the server directories useing samba. With the XP I have no problems. I will thank you for all help Ignacio

  Read the article

• How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

  - by Gizmo

  I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

  Read the article

• Connection between Windows Web Server in DMZ and Windows Application Server and MS SQL Database Server within LAN [closed]

  - by user1345260

  Excuse me for being naive. But I'm a newbie. We have a Windows Web Server within DMZ and a Windows Application Server and MS SQL Database Server. What ports do we open for connection between them? For example: Someone opens the Data Driven Website on the Web Server and they should be able see the data that the website is trying to access from the Database. Currently, I'm planning to open the following ports on the Web Server to establish the access, 80 HTTP 443 HTTPS 21 FTP 3389 RDP 53 DNS 1433 MS SQL Server Please validate my assumption. I would highly appreciate your help. Also, please provide me any articles on this topic so that I can read.

  Read the article

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• connected ethernet without disabling wireless, now I have *two* LAN ip's?

  - by peter karasev

  Ok I'm on ubuntu 11.04, not too knowledgeable about network stuff. Usually people ask things like "wired works but wireless does not!". In m y case, I'm just curious about what it means to have both of them seemingly connected. In 'ipconfig' in shell I see that I have 192.168.1.2 for the wireless AND 192.168.1.3 for the ethernet. What does this mean for applications, does one of the two get precedence? It seems like my pages load slightly faster, so perhaps the ethernet is being used, but I could be imagining the speedup...

  Read the article

• What are the methods of separating network spaces in a LAN?

  - by dash17291

  Please detail me the methods. My thoughts: put the servers in separate (sub)networks the servers are forced to go through the firewall but no NAT is required assign more IP addresses to the internal interface of the server choosing gateway addresses from the clients and servers IP address ranges split DNS Netfilter/{iptables, ipset} could be heavily involved, I'm talking about Linux servers. See for example: Destination NAT Onto the Same Network from internal clients Please do not explain what is NAT or DNS. This is a theoretical question, but my poor English knowledge prevent me to describe it in a fancy fashion.

  Read the article

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• What is a realistic average time difference between servers in the same LAN?

  - by monster

  Until recently, we had at work a small cluster of about 20 small Windows servers (which have now all been virtualized). They were all configured to synchronize with the local time server. It was on an 1Gb sub-network in our own DC. I never got them to be less than about 100ms away from each other, which I consider to be an incredibly big difference. Is that a normal value? What is a realistic expectation of time difference between machines running on a 1Gb network, and all connected to the same time server, and updating frequently, say every 5 minutes? I would like to know this as setting timeouts and other parameters in a distributed application requires to take that difference into consideration.

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >