Search Results

Search found 2399 results on 96 pages for 'wall street journal'.

Page 31/96 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• Connection Issue

  - by Karl Schneider

  Desktop computer, connected directly into a Comcast modem. Every so often, at seemingly random intervals, my connection will drop. This could be while in the middle of browsing, or when I'm not even at the computer. When the connection drops, the modem still shows 4 green lights. The modem is connected to a splitter (cable and internet in same room), and then directly to the wall. To recover from the problem, I am forced to restart my computer, at which point everything works fine again. I have tried an ipconfig/release and renew, it tells me that it is unable to contact the DHCP server, and thus can't renew. I have updated the NICs driver, no luck. I have changed the ethernet cord, no luck. I have had Comcast replace the modem, no luck. The only thing I can think of that hasn't been replaced is the cords connecting the modem to the wall and the splitter. Can anyone think of anything else I may be able to do to isolate what's causing the issue?

  Read the article

• Few questions about a good projector on my PC and tv?

  - by jasondavis

  I have always wanted a projector for my tv, satelite, cable, and even PC in a spare bedroom. Well it's more of a home office that I spend most my time in and the catch here is it is a small room. Room is only the standard 8foot tall. Room is about 13 feet wide on the wall where I would like to mount the project and the wall where the screen would be for it. So only about 13 feet away from projector to screen. I would like to know... 1) From experience or knowledge what would be a good projector I could hook up to my satelite box and also my PC? Cheaper is better in this case but I would still like the best image for my buck and something reliable. There is no sunlight in the room either to worry about. 2) From that distance of about 12-13 feet away, how big of a clear picture could I expect? 3) What kind of cables would I need to purchase and run through my attic to my cable/satelite receiver box as well as my PC? 4) These cables in question 3 would most likely need to be a good 15-20feet in length to reach, would I need anything special for that to work at those distances?

  Read the article

• Configuring SASL support in libmemcached

  - by John Keyes

  I'm trying to build libmemcached with SASL support on OS X Mountain Lion. I have built memcached (1.4.15) with SASL support: $ memcached -S -vv Initialized SASL. slab class 1: chunk size 96 perslab 10922 ... slab class 42: chunk size 1048576 perslab 1 <17 server listening (binary) <18 server listening (binary) <19 send buffer was 9216, now 3728270 <20 send buffer was 9216, now 3728270 <19 server listening (udp) <20 server listening (udp) ... I am trying to build libmemcached with SASL support too. I have tried the following: $ ./configure --prefix=/usr/local \ --with-memcached-sasl=/usr/local/bin/memcached ... $ ./configure --prefix=/usr/local \ --with-memcached-sasl="/usr/local/bin/memcached -S" ... But the resulting configuration summary is the same for both: Configuration summary for libmemcached version 1.0.11 * Installation prefix: /usr/local * System type: apple-darwin12.2.0 * Host CPU: x86_64 * C Compiler: i686-apple-darwin11-llvm-gcc-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C Flags: -O2 -Werror -Wall -Wextra -std=c99 -Wbad-function-cast -Wmissing-prototypes -Wnested-externs -Woverride-init * C++ Compiler: i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) * C++ Flags: -O2 -Werror -Wall -Wextra -Wpragmas -D_FORTIFY_SOURCE=2 -Waddress -Wchar-subscripts -Wcomment -Wctor-dtor-privacy -Wfloat-equal -Wformat=2 -Wmissing-field-initializers -Wmissing-noreturn -Wnon-virtual-dtor -Wnormalized=id -Woverloaded-virtual -Wpointer-arith -Wredundant-decls -Wshadow -Wshorten-64-to-32 -Wsign-compare -Wstrict-overflow=1 -Wswitch-enum -Wundef -Wunused-variable -Wwrite-strings -fwrapv -ggdb * CPP Flags: -I/usr/local/include * Assertions enabled: no * Debug enabled: no * Warnings as failure: no * SASL support: Am I doing something incorrectly? Thanks.

  Read the article

• G4 server running slow

  - by Abby Kach

  I have HP proliant ML 350 servers. We have 8 remote locations where users connect and log on to our server through DYNDNS to access our company ERP's to conduct day to day work. The base of our company ERP's is oracle for which we have a separate server.Now the problem is day by day the load on the server is increasing and the speed is getting slower and slower and users are facing a lot of issues . so I are planning to implement Sonic wall VPN. I conducted a demo of sonic wall but it was slower than the current speed of dyndns. the configuration of my server is as follows :- Linux HP ProLiant 370 Intel Xenon 3.20 GHZ 150 GB (72 * 2) 3 GB Suse Omega HP ProLiant 370 Intel Xenon 3.20 GHZ 300GB (72.8 * 4) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Storage Box HP Storage Works 1400 Intel Xenon 2.00 GHZ 4 TB(1 TB * 4) Raid 5 2 GB Windows Server 2K8 Enterprise Edition Domain & Terminal HP ProLiant 350 Intel Xenon 3.20 GHZ 250 GB(72.8 * 3) Raid 5 4 GB Windows Server 2K3 Enterprise Edition Can some one help me as to how can i speed up my network at remote locations and reduce the problems of speed etc..

  Read the article

• Retail CEO Interviews

  - by David Dorf

  Businessweek's 2012 Interview Issue has interviews with three retail CEOs that are worth a quick read.  I copied some excerpts below, but please follow the links to the entire interviews. Ron Johnson, CEO JCPenney Take me through your merchandising. One of the things I learned from Steve [Jobs]—Steve said three times in his life he had the chance to be part of the change of an interface. If you change the interface, you can dramatically change the entire experience of the product. For Steve, that was the mouse, the scroll wheel on the iPod, and then the [touch]screen. What we’re trying to do here is change the interface of retail. What we call that is the street, and you’re standing in the middle of it. When you walk into a store today, you’re overwhelmed by merchandise. There is a narrow aisle. Typically, it’s filled with product on tables and you’re overwhelmed with the noise of signs and promotions. Especially in the age of the Internet, the idea of going to a very large store and having so much abundance is actually not very appealing. The first thing you find here is you’re inspired. I have used the mannequins. The street is actually this new navigation path for a retail store. So if you come in here—you’ll notice that these aisles are 14 feet wide. These are wider than Nordstrom’s (JWN). Slide show of JCPenney store. Walter Robb, co-CEO Whole Foods What did you learn from the recent recession about selling groceries?It was a lot of humble pie, because our sales experienced a drop that I have never seen in 32 years of retail. Customers left us in droves. We also learned that there were some very loyal customers who loved Whole Foods (WFM), people who said, “I like what you stand for. I like coming here. I like this experience.” That was very affirming. I think the realization was that we’ve got some customers, and we need to make sure we know who they are. So instead of chasing every customer out there, we started doing customer discussion groups. We were growing for growth’s sake, which is not a good strategy. We were chasing the rainbow. We cut the growth in half overnight and said, “All right, slow down. Let’s make sure we’re doing this better and more thoroughly and more thoughtfully.” This company is a mission-based company. This company started to change the world by bringing healthier food to the world. It’s not about the money, it’s about the impact, and this company is back on track as a result of those experiences. Video of Whole Foods store tour. Kay Krill, CEO Ann Taylor You’ve worked in retail all your life. What drew you to it?I graduated from college, and I did not know what I wanted to do. Macy’s (M) came to campus to interview for their training program, and I thought, “Let me give it a try.” I got the job and fell in love with the industry. The president of Macy’s at the time said, “If you don’t wake up every morning dying to go to work, then retailing is not for you; it has to be in your blood.” It was in my blood. I love the fact that every day is different. You can get to be creative one day, financial the next day, marketing the next. I love going to stores. I love talking to associates. I love talking to clients. There’s not a predictable day.

  Read the article

• Understanding the Customer Form in Release 12 from an AR Perspective!!

  - by user793553

  Confused by the Customer Form in Release 12??  Read on, to get some insight into the evolution of this screen, and how it links in with Trading Community Architecture. Historically, the customer data model was owned by Oracle Receivables (AR).  However, as the data model changed and more complex relationships and attributes had to be tracked and monitored, the Trading Community Architecture (TCA) product was created.  All applications within the E-Business suite that require interaction with a customer integrate with TCA. Customer information is no longer stored in the individual applications but rather in a central repository/registry maintained within TCA.  It is important to understand the following entities/concepts stored in TCA: Party: A party is an entity with whom you can have a potential business relationship.  A party can be either a Person or an Organization.  The Party entity is completely independent of any business relationship; this means that a Party can exist even if you have no transactions with it.   The Party is the "umbrella" entity under which you capture all other attributes listed below. Customer: A customer is a party with whom you have an existing business relationship.  From an AR perspective, you can simplify the concepts by thinking of a Customer as a Party. This definition however does not apply to all other applications. In the Oracle Receivables Customer form, the information displayed at the Customer level is from TCA's Party information record. Customer Account (also called Account): An account contains information about how you transact business with a particular customer.  You can create multiple accounts for a customer.  When you create invoices and receipts you associate it to a particular Account of a Customer. Location: A Location is an address.  It is a point in space, typically identified by a street number, a street name, a city, a state or province, a country.  A location is independent of what it is used for - you do not associate a purpose to a location. Party Site: A Party Site is associated to a Party.  It is the location where a party is physically located.  When defining sites for a Party, only one can be an identifying address.  However, you can define other party sites associated to a party. You can define purposes/usage for Party Sites. Account Site: An Account Site is associated to a Customer Account. It is the location associated to the account you are transacting business with. You can define business purposes (also called site uses) for an Account site. Read more about the Customer Workbench in these notes: Doc ID 1436547.1 Oracle Receivables: Understanding the Customer Form in Release 12 Doc ID  1437866.1 Customer Form - Address: Troubleshooting, Known Issues and Patches Doc ID  1448442.1 Oracle Receivables (AR): Customer Workbench Information Center Do you find this type of blog entry useful?  Please add comments to let us know how we can help you more effectively.  Thank you!

  Read the article

• A Reusable Builder Class for .NET testing

  - by Liam McLennan

  When writing tests, other than end-to-end integration tests, we often need to construct test data objects. Of course this can be done using the class’s constructor and manually configuring the object, but to get many objects into a valid state soon becomes a large percentage of the testing effort. After many years of painstakingly creating builders for each of my domain objects I have finally become lazy enough to bother to write a generic, reusable builder class for .NET. To use it you instantiate a instance of the builder and configuring it with a builder method for each class you wish it to be able to build. The builder method should require no parameters and should return a new instance of the type in a default, valid state. In other words the builder method should be a Func<TypeToBeBuilt>. The best way to make this clear is with an example. In my application I have the following domain classes that I want to be able to use in my tests: public class Person { public string Name { get; set; } public int Age { get; set; } public bool IsAndroid { get; set; } } public class Building { public string Street { get; set; } public Person Manager { get; set; } } The builder for this domain is created like so: build = new Builder(); build.Configure(new Dictionary<Type, Func<object>> { {typeof(Building), () => new Building {Street = "Queen St", Manager = build.A<Person>()}}, {typeof(Person), () => new Person {Name = "Eugene", Age = 21}} }); Note how Building depends on Person, even though the person builder method is not defined yet. Now in a test I can retrieve a valid object from the builder: var person = build.A<Person>(); If I need a class in a customised state I can supply an Action<TypeToBeBuilt> to mutate the object post construction: var person = build.A<Person>(p => p.Age = 99); The power and efficiency of this approach becomes apparent when your tests require larger and more complex objects than Person and Building. When I get some time I intend to implement the same functionality in Javascript and Ruby. Here is the full source of the Builder class: public class Builder { private Dictionary<Type, Func<object>> defaults; public void Configure(Dictionary<Type, Func<object>> defaults) { this.defaults = defaults; } public T A<T>() { if (!defaults.ContainsKey(typeof(T))) throw new ArgumentException("No object of type " + typeof(T).Name + " has been configured with the builder."); T o = (T)defaults[typeof(T)](); return o; } public T A<T>(Action<T> customisation) { T o = A<T>(); customisation(o); return o; } }

  Read the article

• TechEd 2010 Important Events

  If youll be attending TechEd in New Orleans in a couple of weeks, make sure the following are all on your calendar:   Party with Palermo TechEd 2010 Edition Sunday 6 June 2010 7:30-930pm Central Time RSVP and see who else is coming here.  The party takes place from 730pm to 930pm Central (Local) Time,  and includes a full meal, free swag, and prizes.  The event is being held at Jimmy Buffetts Margaritaville located at 1104 Decatur Street.   Developer Practices Session: DPR304 FAIL: Anti-Patterns and Worst Practices Monday 7 June 2010 4:30pm-545pm Central Time Room 276 Come to my session and hear about what NOT to do on your software project.  Hear my own and others war stories and lessons learned.  Youll laugh, youll cry, youll realize youre a much better developer than a lot of folks out there.  Heres the official description: Everybody likes to talk about best practices, tips, and tricks, but often it is by analyzing failures that we learn from our own and others' mistakes. In this session, Steve describes various anti-patterns and worst practices in software development that he has encountered in his own experience or learned about from other experts in the field, along with advice on recognizing and avoiding them. View DPR304 in TechEd Session Catalog >> Exhibition Hall Reception Monday 7 June 2010 545pm-9pm Immediately following my session, come meet the shows exhibitors, win prizes, and enjoy plenty of food and drink.  Always a good time.   Party: Geekfest Tuesday 8 June 8pm-11pm Central Time, Pat OBriens Lets face it, going to a technical conference is good for your career but its not a whole lot of fun. You need an outlet. You need to have fun. Cheap beer and lousy pizza (with a New Orleans twist) We are bringing back GeekFest! Join us at Pat OBriens for a night of gumbo, beer and hurricanes. There are limited invitations available, so what are you waiting for? If you are attending the TechEd 2010 conference and you are a developer, you are invited. To register pick up your "duck" ticket (and wristband) in the TechEd Technical Learning Center (TLC) at the Developer Tools & Languages (DEV) information desk. You must have wristband to get in. Tuesday, June 8th from 8pm 11pm Pat OBriens New Orleans 624 Bourbon Street New Orleans, LA 70130 Closing Party at Mardi Gras World Thursday 10 June 730pm-10pm Central Time Join us for the Closing Party and enjoy great food, beverages, and the excitement of New Orleans at Mardi Gras World. The colors, the lights, the music, the joie de vivreits all here.  Learn more >> Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• TechEd 2010 Important Events

  If youll be attending TechEd in New Orleans in a couple of weeks, make sure the following are all on your calendar:   Party with Palermo TechEd 2010 Edition Sunday 6 June 2010 7:30-930pm Central Time RSVP and see who else is coming here.  The party takes place from 730pm to 930pm Central (Local) Time,  and includes a full meal, free swag, and prizes.  The event is being held at Jimmy Buffetts Margaritaville located at 1104 Decatur Street.   Developer Practices Session: DPR304 FAIL: Anti-Patterns and Worst Practices Monday 7 June 2010 4:30pm-545pm Central Time Room 276 Come to my session and hear about what NOT to do on your software project.  Hear my own and others war stories and lessons learned.  Youll laugh, youll cry, youll realize youre a much better developer than a lot of folks out there.  Heres the official description: Everybody likes to talk about best practices, tips, and tricks, but often it is by analyzing failures that we learn from our own and others' mistakes. In this session, Steve describes various anti-patterns and worst practices in software development that he has encountered in his own experience or learned about from other experts in the field, along with advice on recognizing and avoiding them. View DPR304 in TechEd Session Catalog >> Exhibition Hall Reception Monday 7 June 2010 545pm-9pm Immediately following my session, come meet the shows exhibitors, win prizes, and enjoy plenty of food and drink.  Always a good time.   Party: Geekfest Tuesday 8 June 8pm-11pm Central Time, Pat OBriens Lets face it, going to a technical conference is good for your career but its not a whole lot of fun. You need an outlet. You need to have fun. Cheap beer and lousy pizza (with a New Orleans twist) We are bringing back GeekFest! Join us at Pat OBriens for a night of gumbo, beer and hurricanes. There are limited invitations available, so what are you waiting for? If you are attending the TechEd 2010 conference and you are a developer, you are invited. To register pick up your "duck" ticket (and wristband) in the TechEd Technical Learning Center (TLC) at the Developer Tools & Languages (DEV) information desk. You must have wristband to get in. Tuesday, June 8th from 8pm 11pm Pat OBriens New Orleans 624 Bourbon Street New Orleans, LA 70130 Closing Party at Mardi Gras World Thursday 10 June 730pm-10pm Central Time Join us for the Closing Party and enjoy great food, beverages, and the excitement of New Orleans at Mardi Gras World. The colors, the lights, the music, the joie de vivreits all here.  Learn more >> Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Class design issue

  - by user2865206

  I'm new to OOP and a lot of times I become stumped in situations similar to this example: Task: Generate an XML document that contains information about a person. Assume the information is readily available in a database. Here is an example of the structure: <Person> <Name>John Doe</Name> <Age>21</Age> <Address> <Street>100 Main St.</Street> <City>Sylvania</City> <State>OH</State> </Address> <Relatives> <Parents> <Mother> <Name>Jane Doe</Name> </Mother> <Father> <Name>John Doe Sr.</Name> </Father> </Parents> <Siblings> <Brother> <Name>Jeff Doe</Name> </Brother> <Brother> <Name>Steven Doe</Name> </Brother> </Siblings> </Relatives> </Person> Ok lets create a class for each tag (ie: Person, Name, Age, Address) Lets assume each class is only responsible for itself and the elements directly contained Each class will know (have defined by default) the classes that are directly contained within them Each class will have a process() function that will add itself and its childeren to the XML document we are creating When a child is drawn, as in the previous line, we will have them call process() as well Now we are in a recursive loop where each object draws their childeren until all are drawn But what if only some of the tags need to be drawn, and the rest are optional? Some are optional based on if the data exists (if we have it, we must draw it), and some are optional based on the preferences of the user generating the document How do we make sure each object has the data it needs to draw itself and it's childeren? We can pass down a massive array through every object, but that seems shitty doesnt it? We could have each object query the database for it, but thats a lot of queries, and how does it know what it's query is? What if we want to get rid of a tag later? There is no way to reference them. I've been thinking about this for 20 hours now. I feel like I am misunderstanding a design principle or am just approaching this all wrong. How would you go about programming something like this? I suppose this problem could apply to any senario where there are classes that create other classes, but the classes created need information to run. How do I get the information to them in a way that doesn't seem fucky? Thanks for all of your time, this has been kicking my ass.

  Read the article

• How to arrange models, views, controllers in a new Kohana 3 project

  - by Pekka

  I'm looking at how to set up a mid-sized web application with Kohana 3. I have implemented MVC patterns in the past but never worked against a "formalized" MVC framework so I'm still getting my head around the terminology - toying around with basic examples, building views and templates, and so on. I'm progressing fairly well but I want to set up a real-world web project (one of my own that I've been planning for quite some time now) as a learning object. Example-based documentation is a bit sparse for Kohana 3 right now - they say so themselves on the site. While I'm not worried about learning the framework soon enough, I'm a bit at a loss on how to arrange a healthy code base from the start - i.e. how to split up controllers, how to name them, and how to separate the functionality into the appropriate models. My application could, in its core, be described as a business directory with a main businesses table. Businesses can be listed by category and by street name. Each business has a detail page. Business owners can log in and edit their business's entry. Businesses can post offers into an offers table. I know this is pretty vague, I'll be more than happy to go into more detail on request. Supposing I have all the basic functionality worked out and in place already - list all businesses, edit business, list businesses by street name, create offer, and so on, and I'm just looking for how to fit the functionality into a Kohana application structure that can be easily extended: Do you know real-life, publicly accessible examples of applications built on Kohana 3 where I could take a peek how they do it? Are there conventions or best practices on how to structure an extendable login area for end users in a Kohana project that is not only able to handle a business directory page, but further products on separate pages as well? Do you know application structuring HOWTOs or best practices for Kohana 3 not mentioned in the user guide and the inofficial Wiki? Have you built something similar and could give me some recommendations?

  Read the article

• Copy Selective Data from Database to Invoice, Based on Certain Criteria

  - by Scott

  For starters, here is an example of a microsoft excel database I am working with: Month/Address/Name/Description/Amount January/123 Street/Fred/Painting/100 January/456 Avenue/Scott/Flooring/400 January/789 Road/Scott/Plumbing/100 February/123 Street/Fred/Flooring/600 February/246 Lane/Fred/Electrical/300 March/789 Road/Scott/Drywall/150 What I want to be able to do is selectively copy info from this databse to invoices (also excel). The invoice has three columns: Address/Description/Amount. I want to be able to automatically fill the invoices in as the database is filled in (either automatically, or if I have to actually manually run the macro to do it, that might be fine). Each name (Scott, Fred, etc.) will have their own set of 12 invoices for the year. So, e.g., I want to be able to produce a January invoice for all work done for Scott in January, showing the address, the description and the amount, line by line. So every time work on Scott's address(es) is done, the database is filled in, and i want it to "send" that information to the invoice on the next available line, filling in only the Address/Description/Amount columns from the database. Fred's invoice should fill in as any work is done on Fred's addresses. And once the month changes, the next invoice should start filling in. So first I need to filter the data by the month and the name (and there is actually one more column to filter by, but let's keep this example simpler). Then I need to list the remaining data on the invoice, but only certain cells from the rows that are now left. Help anyone?

  Read the article

• Cloning and renaming form elements with jQuery

  - by Micor

  I am looking for an effective way to either clone/rename or re-create address fields to offer ability to submit multiple addresses on the same page. So with form example like this: <div id="addresses"> <div class="address"> <input type="text" name="address[0].street"> <input type="text" name="address[0].city"> <input type="text" name="address[0].zip"> <input type="text" name="address[0].state"> </div> </div> <a href="" id="add_address">Add address form</a> From what I can understand there are two options to do that: Recreate the form field by field and increment the index which is kind of verbose: var index = $(".address").length; $('<`input`>').attr({ name: 'address[' + index + '].street', type: 'text' }).appendTo(...); $('<`input`>').attr({ name: 'address[' + index + '].city', type: 'text' }).appendTo(...); $('<`input`>').attr({ name: 'address[' + index + '].zip', type: 'text' }).appendTo(...); $('<`input`>').attr({ name: 'address[' + index + '].state', type: 'text' }).appendTo(...); Clone Existing layer and replace the name in the clone: $("div.address").clone().appendTo($("#addresses")); Which one do you recommend using in terms of being more efficient and if its #2 can you please suggest how I would go about search and replacing all occurrences of [0] with [1] ([n]). Thank you.

  Read the article

• How can I tell the Data Annotations validator to also validate complex child properties?

  - by GWB

  Can I automatically validate complex child objects when validating a parent object and include the results in the populated ICollection<ValidationResult>? If I run the following code: using System; using System.Collections.Generic; using System.ComponentModel.DataAnnotations; namespace ConsoleApplication1 { public class Person { [Required] public string Name { get; set; } public Address Address { get; set; } } public class Address { [Required] public string Street { get; set; } [Required] public string City { get; set; } [Required] public string State { get; set; } } class Program { static void Main(string[] args) { Person person = new Person { Name = null, Address = new Address { Street = "123 Any St", City = "New York", State = null } }; var validationContext = new ValidationContext(person, null, null); var validationResults = new List<ValidationResult>(); var isValid = Validator.TryValidateObject(person, validationContext, validationResults); Console.WriteLine(isValid); validationResults.ForEach(r => Console.WriteLine(r.ErrorMessage)); Console.ReadKey(true); } } } I get the following output: False The Name field is required. But I was expecting something similar to: False The Name field is required. The State field is required.

  Read the article

• Populating objects in C#

  - by acadia

  Hello, I have Order,OrderDetails and OrderStatus objects as shown below: public class Order { public override int OrderId { get; set; } public string FName { get; set; } public string MName { get; set; } public string LName { get; set; } public string Street { get; set; } public string City { get; set; } public List<OrderDetails> OrderDetails { get; set; }; } public class OrderDetails { public override int OrderdetailsId { get; set; } public int OrderId { get; set; } public int ProductID { get; set; } public int Qty { get; set; } public List<OrderStatus> OrderStat { get; set; }; } public class OrderStatus { public override int OrderdetailsStatusId { get; set; } public int OrderdetailsId { get; set; } public int StatusID { get; set; } } I cannot use LinQ. I want to populate the order object like we do in LinQ. How do I populate all all the properties in Order object: for eg. Order o =new Order(); o.FName="John"; o.LName="abc"; o.Street="TStreet"; o.City="Atlanta"; then o.Orderdetails.Add(orderdetails) How do I do that here in C# when not using LinQ.

  Read the article

• PostgreSQL - Why are some queries on large datasets so incredibly slow

  - by Brad Mathews

  Hello, I have two types of queries I run often on two large datasets. They run much slower than I would expect them to. The first type is a sequential scan updating all records: Update rcra_sites Set street = regexp_replace(street,'/','','i') rcra_sites has 700,000 records. It takes 22 minutes from pgAdmin! I wrote a vb.net function that loops through each record and sends an update query for each record (yes, 700,000 update queries!) and it runs in less than half the time. Hmmm.... The second type is a simple update with a relation and then a sequential scan: Update rcra_sites as sites Set violations='No' From narcra_monitoring as v Where sites.agencyid=v.agencyid and v.found_violation_flag='N' narcra_monitoring has 1,700,000 records. This takes 8 minutes. The query planner refuses to use my indexes. The query runs much faster if I start with a set enable_seqscan = false;. I would prefer if the query planner would do its job. I have appropriate indexes, I have vacuumed and analyzed. I optimized my shared_buffers and effective_cache_size best I know to use more memory since I have 4GB. My hardware is pretty darn good. I am running v8.4 on Windows 7. Is PostgreSQL just this slow? Or am I still missing something? Thanks! Brad

  Read the article

• Optimize an SQL statement

  - by kovshenin

  Hey, I'm running WordPress, the database diagram could be found here: http://codex.wordpress.org/Database_Description After doing tonnes of filters and applying some hooks to the core, I'm left with the following query: SELECT SQL_CALC_FOUND_ROWS wp_posts.* FROM wp_posts JOIN wp_postmeta ppmeta_beds ON (ppmeta_beds.post_id = wp_posts.ID AND ppmeta_beds.meta_key = 'pp-general-beds' AND ppmeta_beds.meta_value >= 2) JOIN wp_postmeta ppmeta_baths ON (ppmeta_baths.post_id = wp_posts.ID AND ppmeta_baths.meta_key = 'pp-general-baths' AND ppmeta_baths.meta_value >= 3) JOIN wp_postmeta ppmeta_furnished ON (ppmeta_furnished.post_id = wp_posts.ID AND ppmeta_furnished.meta_key = 'pp-general-furnished' AND ppmeta_furnished.meta_value = 'yes') JOIN wp_postmeta ppmeta_pool ON (ppmeta_pool.post_id = wp_posts.ID AND ppmeta_pool.meta_key = 'pp-facilities-pool' AND ppmeta_pool.meta_value = 'yes') JOIN wp_postmeta ppmeta_pool_type ON (ppmeta_pool_type.post_id = wp_posts.ID AND ppmeta_pool_type.meta_key = 'pp-facilities-pool-type' AND ppmeta_pool_type.meta_value IN ('tennis', 'voleyball', 'basketball', 'fitness')) JOIN wp_postmeta ppmeta_sport ON (ppmeta_sport.post_id = wp_posts.ID AND ppmeta_sport.meta_key = 'pp-facilities-sport' AND ppmeta_sport.meta_value = 'yes') JOIN wp_postmeta ppmeta_sport_type ON (ppmeta_sport_type.post_id = wp_posts.ID AND ppmeta_sport_type.meta_key = 'pp-facilities-sport-type' AND ppmeta_sport_type.meta_value IN ('tennis', 'voleyball', 'basketball', 'fitness')) JOIN wp_postmeta ppmeta_parking ON (ppmeta_parking.post_id = wp_posts.ID AND ppmeta_parking.meta_key = 'pp-facilities-parking' AND ppmeta_parking.meta_value = 'yes') JOIN wp_postmeta ppmeta_parking_type ON (ppmeta_parking_type.post_id = wp_posts.ID AND ppmeta_parking_type.meta_key = 'pp-facilities-parking-type' AND ppmeta_parking_type.meta_value IN ('street', 'off-street', 'garage')) JOIN wp_postmeta ppmeta_garden ON (ppmeta_garden.post_id = wp_posts.ID AND ppmeta_garden.meta_key = 'pp-facilities-garden' AND ppmeta_garden.meta_value = 'yes') JOIN wp_postmeta ppmeta_garden_type ON (ppmeta_garden_type.post_id = wp_posts.ID AND ppmeta_garden_type.meta_key = 'pp-facilities-garden-type' AND ppmeta_garden_type.meta_value IN ('private', 'communal')) JOIN wp_postmeta ppmeta_type ON (ppmeta_type.post_id = wp_posts.ID AND ppmeta_type.meta_key = 'pp-general-type' AND ppmeta_type.meta_value IN ('villa', 'apartment', 'penthouse')) JOIN wp_postmeta ppmeta_status ON (ppmeta_status.post_id = wp_posts.ID AND ppmeta_status.meta_key = 'pp-general-status' AND ppmeta_status.meta_value IN ('off-plan', 'resale')) JOIN wp_postmeta ppmeta_location_type ON (ppmeta_location_type.post_id = wp_posts.ID AND ppmeta_location_type.meta_key = 'pp-location-type' AND ppmeta_location_type.meta_value IN ('beachfront', 'countryside', 'town-center', 'near-the-sea', 'hillside', 'private-resort')) JOIN wp_postmeta ppmeta_price_range ON (ppmeta_price_range.post_id = wp_posts.ID AND ppmeta_price_range.meta_key = 'pp-general-price' AND ppmeta_price_range.meta_value BETWEEN 10000 AND 50000) JOIN wp_postmeta ppmeta_area_range ON (ppmeta_area_range.post_id = wp_posts.ID AND ppmeta_area_range.meta_key = 'pp-general-area' AND ppmeta_area_range.meta_value BETWEEN 50 AND 150) WHERE 1=1 AND (((wp_posts.post_title LIKE '%fdsfsad%') OR (wp_posts.post_content LIKE '%fdsfsad%'))) AND wp_posts.post_type = 'property' AND (wp_posts.post_status = 'publish' OR wp_posts.post_status = 'private') ORDER BY wp_posts.post_date DESC LIMIT 0, 10 It's way too big. Could anybody please show me a way of optimizing all those joins into fewer statements? As you can see they all use the same tables but under different names. I'm not an SQL guru but I think there should be a way, because this is insane ;) Thanks! Update Here's what explain returns: http://twitpic.com/1cd36p

  Read the article

• Google Maps API - Get points along route between lat/long

  - by user311374

  I have a web site that I am trying to get completed and I need to have the user click points on a map and then work out the route on the roads between the two points. So the user clicks the first point on 1st street, and then clicks another point on 4th street, and the map will find the best way to get there and plot the route on the map. I am assuming this can be done using directions and parse it up, but I have been searching for an hour now and can't find what I am looking for (maybe bad search terms). I need to be able to plot the map manually (?) so I can calculate the distance, etc... of the route as the user continues to click. The site that is in beta is http://www.RunMyRoute.com/UserRoutes/Create and you can see I am trying to create running routes. I want the user to have the option for the route to follow the roads versus just a straight line between two points on the map. Any help on this would be great! Simon.

  Read the article

• Windows Phone app: Binding data in a UserControl which is contained in a ListBox

  - by Alexandros Dafkos

  I have an "AddressListBox" ListBox that contains "AddressDetails" UserControl items, as shown in the .xaml file extract below. The Addresses collection is defined as ObservableCollection< Address Addresses and Street, Number, PostCode, City are properties of the Address class. The binding fails, when I use the "{Binding property}" syntax shown below. The binding succeeds, when I use the "dummy" strings in the commented-out code. I have also tried "{Binding Path=property}" syntax without success. Can you suggest what syntax I should use for binding the data in the user controls? <ListBox x:Name="AddressListBox" DataContext="{StaticResource dataSettings}" ItemsSource="{Binding Path=Addresses, Mode=TwoWay}"> <ListBox.ItemTemplate> <DataTemplate> <!-- <usercontrols:AddressDetails AddressRoad="dummy" AddressNumber="dummy2" AddressPostCode="dummy3" AddressCity="dummy4"> </usercontrols:AddressDetails> --> <usercontrols:AddressDetails AddressRoad="{Binding Street}" AddressNumber="{Binding Number}" AddressPostCode="{Binding PostCode}" AddressCity="{Binding City}"> </usercontrols:AddressDetails> </DataTemplate> </ListBox.ItemTemplate> </ListBox>

  Read the article

• Value objects in DDD - Why immutable?

  - by Hobbes

  I don't get why value objects in DDD should be immutable, nor do I see how this is easily done. (I'm focusing on C# and Entity Framework, if that matters.) For example, let's consider the classic Address value object. If you needed to change "123 Main St" to "123 Main Street", why should I need to construct a whole new object instead of saying myCustomer.Address.AddressLine1 = "123 Main Street"? (Even if Entity Framework supported structs, this would still be a problem, wouldn't it?) I understand (I think) the idea that value objects don't have an identity and are part of a domain object, but can someone explain why immutability is a Good Thing? EDIT: My final question here really should be "Can someone explain why immutability is a Good Thing as applied to Value Objects?" Sorry for the confusion! EDIT: To clairfy, I am not asking about CLR value types (vs reference types). I'm asking about the higher level DDD concept of Value Objects. For example, here is a hack-ish way to implement immutable value types for Entity Framework: http://rogeralsing.com/2009/05/21/entity-framework-4-immutable-value-objects. Basically, he just makes all setters private. Why go through the trouble of doing this?

  Read the article

• Google Maps Terms of Service - saving some data to a database

  - by R.M.

  I've read the terms of service, and, from what I understand, I'm not allowed to store any information I retrieve from the Google Maps API. Are there any exceptions to this? More to the point, I'm planning on building an application that shows the user several points of interest (like restaurants, libraries etc) at a certain distance around a location he chooses (it can be in one city or more, depending on the distance he chooses). There are two problems: The first problem is that (at least for my country) the geocoder doesn't locate exact addresses, at best it only locates street names (but completely ignores street numbers) in larger cities. It is even worse for smaller rural areas. So the only way to accurately show the places on the map is by storing their coordinates in the database. Another problem seems to be with calculating distances. To show the points located below a certain distance from the user, it would mean I would have to use GDirections to get all distances between the user's location and the other points, to see which ones to show. That would be really slow for the user (since I also have to set a small delay between requests), and it would also send a pretty large amount of requests to google. Would I be allowed to store those distances in a database? The users would not be able to access a list of all the stored information, they would only see the names of the places, and a map with some markers on it. Thank you.

  Read the article

• Geolocation and jQuery - Can't post results using ajax

  - by etombaugh

  I'm currently working on a project to make a location-aware site. In essence, the user comes to the page, and their location is found using the HTML5 method and then using jQuery, the location is posted to a page which saves the location/address to a codeigniter session, but if they want to update their location, or change to a different location(IE they want to use their work address as the location instead of their present address), theres a jQuery colorbox that displays and lets them type in a custom address. Everything works flawlessly to get the initial location, but when I try and get the updated location saved, I receive the error "Uncaught TypeError: Object [object DOMWindow] has no method 'lat'" which then Google Chrome references as being an error not in jQuery, but in the file for Google Maps API. Any suggestions? jQuery('.inputsubmit').click(function() { //Takes values from user submitted fields and parses them into an address string var street = jQuery('.inputaddress').val(); var city = jQuery('.inputcity').val(); var state = jQuery('.inputstate').val(); var address = street +" "+ city +", " +state; geocoder = new google.maps.Geocoder(); var geocoderresult= geocoder.geocode({'address': address}, function(results, status) { if (status == google.maps.GeocoderStatus.OK) { var newlocation = results[0].geometry.location; //Posts coordinates and address string to a CodeIgniter function to update users session information jQuery.post("somepage", {location: newlocation, address: address},function(data) { alert("Data Loaded: " + data); }); } else { alert("Geocoder failed due to: " + status); } }); }); I've tried everything I can think of to get the post to work. All of the code works up till the point, and I've commented out the post line and everything works correctly. This is one of our main website's features, to provide instant and quick results based off of location. Thanks!

  Read the article

• databind the Source property of the WebBrowser in WPF

  - by Russ

  Does anyone know how to databind the .Source property of the WebBrowser in WPF ( 3.5SP1 )? I have a listview that I want to have a small WebBrowser on the left, and content on the right, and to databind the source of each WebBrowser with the URI in each object bound to the list item. This is what I have as a proof of concept so far, but the "<WebBrowser Source="{Binding Path=WebAddress}"" does not compile. <DataTemplate x:Key="dealerLocatorLayout" DataType="DealerLocatorAddress"> <StackPanel Orientation="Horizontal"> <!--Web Control Here--> <WebBrowser Source="{Binding Path=WebAddress}" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ScrollViewer.VerticalScrollBarVisibility="Disabled" Width="300" Height="200" /> <StackPanel Orientation="Vertical"> <StackPanel Orientation="Horizontal"> <Label Content="{Binding Path=CompanyName}" FontWeight="Bold" Foreground="Blue" /> <TextBox Text="{Binding Path=DisplayName}" FontWeight="Bold" /> </StackPanel> <TextBox Text="{Binding Path=Street[0]}" /> <TextBox Text="{Binding Path=Street[1]}" /> <TextBox Text="{Binding Path=PhoneNumber}"/> <TextBox Text="{Binding Path=FaxNumber}"/> <TextBox Text="{Binding Path=Email}"/> <TextBox Text="{Binding Path=WebAddress}"/> </StackPanel> </StackPanel> </DataTemplate>

  Read the article

• unique items from an observableArray of object properties

  - by Joe

  I'm trying to extract unique properties from a knockout.js observableArray of objects, to populate a drop menu. Being new to knockout, I'm really struggling with this! I want to iterate over a contacts list, and populate a drop menu with a unique value from each person object within the observableArray. So in my code example below, I wish to populate my drop menu with a list of people 'type' - family, friend etc. Looking on Google, I found a similar function, but it does not return any values, even if I console.log the results? //dummy data more rows in actual code... var people = [ { name: "Contact 1", address: "1, a street, a town, a city, AB12 3CD", tel: "0123456789", email: "[email protected]", type: "family" }, { name: "Contact 2", address: "1, a street, a town, a city, AB12 3CD", tel: "0123456789", email: "[email protected]", type: "friend" } ]; function ContactsViewModel(people) { var self = this; self.contacts = ko.observableArray(people); self.uniqueSelect = ko.dependentObservable(function() { return( ko.utils.arrayGetDistinctValues(self.contacts().type).sort()); }, self); }; ko.applyBindings(new ContactsViewModel()); And HTML template <p>Show me: <select data-bind="options: ContactsViewModel.uniqueSelect"></select></p> Any help appreciated, as a noob I'm lost! Thanks

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >