Search Results

Search found 64721 results on 2589 pages for 'windows usb drive'.

Page 31/2589 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Force spin-down of external hard-drive on linux (raspberry pi)

    - by user258346
    I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

    Read the article

  • Suggestions for Windows 8 migration [closed]

    - by Big Endian
    I'm thinking of migrating to Windows 8. At first I hated it, but I'm pretty sure the Windows 8 model is the future, and I don't particularly want to end up hating the future like my parents, frustrated and bewildered by anything past Windows XP. I'm currently running Windows 7 and my system has been accumulating some problems. It's probably an accumulation of issues from installing too much software, changing firewall settings, installing Ubuntu alongside Windows, and... well I'm not sure, but my computer has been buggy in unexpected ways lately (freezing and unfreezing, display driver crashing and recovering, and what I call "deep freeze/thaw cycle" where the mouse won't even move for a while). I'm good at solving computer problems, but I can't seem to get to the root of these and my best idea for fixing them is making sure I've backed up every file then re-installing the entire OS. Luckily for me, a new OS is just around the corner so this would be a good time to get two things out of the way at once. The problem I see is that the upgrade options I see are all "seamless". I don't want a seamless upgrade. I want to wipe the slate clean and start all over. Does this mean I will have to buy a full, new copy of Windows 8 rather than one of the cheaper upgrading options? Or does it not make since for me to go to Windows 8 given that I have a laptop, not a tablet? Maybe I should just re-install Windows 7, or even call good enough good enough, try to eliminate the bugs, and start with a fresh slate in 2-3 years after this computer eventually dies entirely from (inevitable) hardware failure. What would be the advantages or disadvantages and costs of each option, how would I go about upgrading to Windows 8 if that's the option I choose, and what is your personal opinion about my situation?

    Read the article

  • SATA DVD drive refuses to read movie DVDs

    - by poke
    Hey, I have a problem with my DVD Drive (Asus DRW-2014L1T, most current firmware installed) on Windows 7 x64. When I insert a DVD movie and Windows starts to access the drive (for autoplay, or when I manually click on the drive icon), my computer hangs up in a particular way, while trying to read the disk. Explorer stops reacting and several programs won't run or their launch is horribly delayed (like the device manager). In th end, I can't access the movie and can't even eject the disk (probably because Windows is still trying to access it). To get the disk out of the drive I then have to reboot (which sometimes doesn't work either) and eject the disk before Windows boots. BIOS recognizes the drive just fine, and Windows is also able to read data disks (tried it with some software disks), but just refuses any movies. I have checked the region code in the device manager, but it is correct. My notebook is reading the disks just fine btw.. I remember having the same problem with an older drive as well, but I don't remember what I did to make it work again (maybe I didn't even fix the problem back then). I do remember however that booting with the disk inserted made Windows recognize the disk, however this doesn't work in this situation either. Do you have any idea what to do to fix that problem?

    Read the article

  • Windows 8 Installation doesn't detect my SATA Maxtor 6V250F0 HDD

    - by dosaki
    I've been using Ubuntu on a desktop computer I have in my house and I'd like to try to install Windows 8 and replace the Ubuntu system. In the installation wizard of Windows 8 I get stuck in the point where I have to specify the HDD to install the OS to. The problem is that I cannot see any hard disk drive to select. I believe this may be related to drivers but I don't know where to get them. Can anyone help me with this?

    Read the article

  • Dual boot: Windows XP and Ubuntu

    - by user19455
    (I know that there are some questions similar to this one, but the ones I have read (and I have read more than one, did not answer my question) I have installed, in two physically different hard drives Windows XP and Ubuntu 9.0. I would like to have a dual boot that, if nothing was pressed, the Windows XP would start automatically. I have read about Grub but got the impression that it wasn't possible to default the operating system to start to something other than Ubuntu. Thanks.

    Read the article

  • Recovery Harddisk for windows 7 (Details inside)

    - by iSumitG
    I want to create recovery media (DVD or HDD) for my Windows 7 running on my VAIO laptop. I noticed that my HDD is already having 13.51 GB partition which is labelled as "Recovery Partition" (not visible in My Computer but visible in Computer management tool in control panel). Can you please suggest me how to use this Recovery partition as a recovery media for my windows? I don't want to create DVDs as recovery media.

    Read the article

  • My feenix nascita mouse isn't moving my cursor. Ubuntu version appears to not matter. How do I debug this, and get the mouse working?

    - by NullVoxPopuli
    I had 13.04, upgraded to 13.10, and did a fresh install of 13.10, no luck. Any ideas? Just tail -f'd my syslog and plugged in the mouse. here is what I got: Oct 26 16:15:50 Orithyia kernel: [83369.618365] usb 1-1.5.2: new full-speed USB device number 6 using ehci-pci Oct 26 16:15:50 Orithyia kernel: [83369.718913] usb 1-1.5.2: New USB device found, idVendor=04d9, idProduct=a081 Oct 26 16:15:50 Orithyia kernel: [83369.718919] usb 1-1.5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 26 16:15:50 Orithyia kernel: [83369.718921] usb 1-1.5.2: Product: USB Gaming Mouse Oct 26 16:15:50 Orithyia kernel: [83369.718924] usb 1-1.5.2: Manufacturer: Holtek Oct 26 16:15:50 Orithyia kernel: [83369.722486] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2/1-1.5.2:1.0/input/input13 Oct 26 16:15:50 Orithyia kernel: [83369.722786] hid-generic 0003:04D9:A081.0004: input,hidraw3: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:1a.0-1.5.2/input0 Oct 26 16:15:50 Orithyia kernel: [83369.729362] hid-generic 0003:04D9:A081.0005: usage index exceeded Oct 26 16:15:50 Orithyia kernel: [83369.729366] hid-generic 0003:04D9:A081.0005: item 0 2 2 2 parsing failed Oct 26 16:15:50 Orithyia kernel: [83369.729379] hid-generic: probe of 0003:04D9:A081.0005 failed with error -22 Oct 26 16:15:50 Orithyia kernel: [83369.731759] hid-generic 0003:04D9:A081.0006: hiddev0,hidraw4: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:1a.0-1.5.2/input2 Oct 26 16:15:50 Orithyia mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.2" Oct 26 16:15:50 Orithyia mtp-probe: bus: 1, device: 6 was not an MTP device So, I see it did see it is a mouse... but the cursor doesn't move when I move the mouse. Not sure where to debug from here.

    Read the article

  • Access USB devices through Delphi in Windows XP standard

    - by Lex Dean
    I have been studding this subject big time and got some code together big time Do not go near Jan Axelson's Lakeview Research its crap I'm telling you I found a jedi project not completed on the INtel web site that was a lot better. and much reading has opened doors to me I'm in desperate need for a registry reader that reads with out using TRegistry or the windows.pas call to find a registry key because this XP(+) call has a windows bug when calling HKEY_LOCAL_MACHINE root directory I'm using Delphi 4 that also does not have TBrkApart object if I had that object I can make my own registry access object or some one may know of an object Can any Some one one help please J Lex Dean email:- lexdeanair at hotmail.com

    Read the article

  • Toshiba Satellite P755D USB 3.0 Drivers Missing - Windows 7 Professional

    - by nicorellius
    I bought a Toshiba Satellite P755D recently and installed Windows 7 Professional on the machine. It runs great. But I noticed the exclamation point in the yellow triangle icon in the Device Manager next to the Universal Serial Buss (USB) Controller (I'm assuming this is the USB 3.0 controller because mine doesn't recognize devices). Normally, when this kind of thing happens I go to the manufacturer's website and download appropriate drivers and call it a day. But not this time... I browsed to my model and found no driver for the USB 3.0 controller. I tried other HW and Utility drivers, thinking they would be bundled. No luck. I tried looking up the motherboard in my machine. Generic name, no luck. I then called Toshiba technical support and they tried basic troubleshooting, eg, uninstall device, reboot, for auto-installation; no luck. I popped the Windows 7 disk back in and tried to get information that way, no luck. Finally, the technical support guy said he would look into the engineer's system to see if there was a specific driver available and that's where I'm at. The technician told me that these USB 3.0 drivers come within the native driver pack in windows but that doesn't seem to be the case. Any ideas? EDIT - See attached screen shots.

    Read the article

  • Boot drive is incorrect one.

    - by Dwayne
    I have several hard drives installed. I normally use c: as my boot drive and a much larger drive (h:) for storing most of my files. I found a subfolder in my c:windows folder named windows after a failed reinstall of Vista. Upon inspection I determined it to be older than the c:windows folder and therefore it must be the older, working version of the boot. I renamed the c:windows folder to c:windows.bad and moved the sub windows to the c: root directory. I also copied it to the h: drive. Now MSCONFIG reports that the copy that is booting is the h: copy. How can I change it back to the c: copy and can I delete the c:windows.bad file set?

    Read the article

  • How to start Windows Explorer as domain administrator [closed]

    - by Otiel
    Possible Duplicate: How do you run windows explorer as a different user? Is it possible to start a Windows Explorer with the rights of another domain user? I tried to do the following to start a Windows Explorer on my computer as my domain Administrator, but without success: Right click on C:\Windows\explorer.exe to select Run as different user, Enter the domain administrator credentials: Domain\Administrator ************ The windows explorer session only opens with my current user rights (Domain\me). The reason behind my question is that I want to change some folder rights on a domain shared disk and I need the Domain\Administrator user rights to do it. Usually, I do it by login as Domain\Administrator on the server hosting the shared disk but I would like to be able to do it from my PC, logged as my current login (Domain\me). EDIT As seen in the linked posts, it is not possible anymore on Windows Vista or 7. On Windows XP, the solution is to do: runas /user:domain\username "explorer /separate"

    Read the article

  • I want to change hard drive. How to move system partition with Windows 7?

    - by Semyon Perepelitsa
    I've bought a new hard drive and want to move all my data to it. I had no problem with moving all files on non-system partition. But I don't know how to move system partiton. Now I have 3 partitions on the new disk, fist two was created by Windows installation CD (I tried to move system using internal tools, but it didn't work for me), third is filled with my successfully transferred data from old disk. And there are two partitions on the old disk: the first one is system (Windows 7) and the second one is my old main storage, that I already moved to the new hard drive and now it is empty. How can I change the placement of Windows 7 with minimal difficulties and losses, so I could work on the new hard drive just as I did it on the old one?

    Read the article

  • How to add the Windows defender into Windows Explorer's right click menu to scan a particular drive/folder/file on demand?

    - by avirk
    There is no option in Windows Explorer to scan a particular drive (or file) on demand by right clicking on it in Windows Explorer as we had in Windows 7 with Microsoft Security Essentials or like other antivirus solutions. I know we can run a custom scan for the particular drive or specific folder but that process is too lengthy and time consuming. The guide How to Add a "Windows Defender" Cascading Desktop Context Menu in Windows 8 explains how we can add Windows Defender in the desktop right click menu, so I'm curious, is there a way to add it in the Windows Explorer right click menu to launch a search whenever I need to?

    Read the article

  • Windows detected a hard disk failure* - what should I do?

    - by bart
    I'm using Windows 7 x64 Ultimate, I'm getting windows error popups like this one for about 3 days, multiple times a day: This Samsung SpinPoint F3 HD502HJ 500 GB is about 2 years old and I already checked it with Samsung ES Tool 3.0, did all the scans (took hours) and everything is fine! I have no malware, viruses and this started to happen after I have had some electrcity issues at my house (multiple power surges / overvolatege during the night, PC was connected, but turned off), any ideas? What other test should I perform? I believe the disk could be damaged, but then diagnostic tools should prove this, right? *in fact "Windows detected hard disk problem" but I was unable to put word "problem" within the title as well.

    Read the article

  • Is it possible to install Windows 8 on the SanDisk ReadyCache 32GB SSD drive?

    - by halil ibrahim
    I bought the SanDisk ReadyCache 32GB SSD drive this week. I didn't know about the caching stuff and thought that I would be able to install Windows 8 on it. Now I'm using it as a cache drive with the ExpressCache software. But I wonder if it is possible to use this SSD as a primary system drive with an operating system installed on it. I've tried to format the disk via Windows Disc Manager Tool, but the format option is disabled. Only delete and information options are allowed. Can you help me with this?

    Read the article

  • How to upgrade to Windows 8.1 on a machine with a Users folder on a separate drive?

    - by ahsteele
    I tried to upgrade from Windows 8 to Windows 8.1. Unfortunately, during the upgrade process I receive the following error: Sorry, it looks like this PC can't run Windows 8.1. This might be because the Users or Program Files folder is being redirected to another partition. Which is accurate in that I have my Users directory on my D: drive and Windows installed on my C: drive. I do this because my C: drive is an SSD drive and D: drive is a spinning rust drive where I keep my data. Is it possible to upgrade to Windows 8.1 from a Windows 8 install with a redirected Users folder? I do not consider a full reinstall of Windows 8 with a non-mapped Users folder and then upgrading that installation to be "upgrading."

    Read the article

  • I accidentally made my new hard drive (the non system drive) my primary partition

    - by qwerty2
    Hi all, When installing a new hard drive, I accidentally formatted it using 'Disk Management' and set it up as my primary active partition, even though it isn't the system drive. Then, when I restarted my machine, Windows wouldn't boot, citing a missing or corrupt SYSTEM folder. Can anyone help me re-enable the system hard drive as my primary active partition? Any help would be greatly appreciated.

    Read the article

  • Why does my drive show as 180GB used, but copies only 40GB?

    - by Manuel
    My computer crashed, so I removed the drive (with Windows XP Professional 32-Bit) and put this drive in another computer running Windows 7 64-bit. Booting with Win7, when going to My Computer it is showing the XP drive as more than 180GB used. So as a quick backup, I'm trying to copy all the disk's content to a folder, but when I start copying, it's showing only 40 GB as the total size of the files to copy. I enabled showing system and hidden files in View options. What could be the problem?

    Read the article

  • Cannot reformat flash drive

    - by user933531
    I have tried to reformat on Ubuntu using gparted, in Windows using their tool, and OSX using Disk Utility. I have also attempted by using the terminal but also failed there. When I verify disk using Disk Utility, I get the following output: Verifying volume “REDSTRIPE” ** /dev/disk2s1 ** Phase 1 - Preparing FAT ** Phase 2 - Checking Directories ** Phase 3 - Checking for Orphan Clusters 168 files, 4507316 KiB free (1126829 clusters) MARK FILE SYSTEM CLEAN? no ***** FILE SYSTEM IS LEFT MARKED AS DIRTY ***** Error: This disk needs to be repaired. Click Repair Disk. But I am unable to repair disk. See OSX examples below:

    Read the article

  • Deleting old system folders from a drive that is no longer the windows installation drive

    - by grenade
    I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

    Read the article

  • USB Hub and Ubuntu

    - by aserwin
    I have a powered 7 port hub connected to my Ubuntu box and it does nothing. The devices (zip drive and web cam) work direct, but aren't recognized through the hub. This worked fine in Windows 7. I can't prove it is the OS because this is a new motherboard and processor. Any advice? EDIT : Output from lsusb -v Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:12.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0503 highspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:13.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:16.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:12.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:13.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:14.5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:16.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 31 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 15 bNumDeviceCaps 1 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 3 Lowest fully-functional device speed is SuperSpeed (5Gbps) bU1DevExitLat 3 micro seconds bU2DevExitLat 2047 micro seconds Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 04a9:1709 Canon, Inc. PIXMA MP150 Scanner Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04a9 Canon, Inc. idProduct 0x1709 PIXMA MP150 Scanner bcdDevice 1.08 iManufacturer 1 Canon iProduct 2 MP150 iSerial 3 20BC24 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 11 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 007 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc517 LX710 Cordless Desktop Laser bcdDevice 38.10 iManufacturer 1 Logitech iProduct 2 USB Receiver iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 98mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 59 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) This is with the powered hub plugged in.

    Read the article

  • Windows XP - Security Update for Windows XP (KB923561) (KB946648) (KB956572) (KB958644)

    - by leeand00
    My father's computer has Windows XP, but when I try to install the service packs it always fails. What gives? Here are the errors that I get in the event log: Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB946648). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 38 33 44 31 41 44 ={83D1AD 0028: 46 35 2d 37 37 39 44 2d F5-779D- 0030: 34 30 31 36 2d 38 43 33 4016-8C3 0038: 31 2d 35 34 39 32 37 30 1-549270 0040: 46 36 37 42 33 46 7d 20 F67B3F} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 34 20 00 04 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Catagory: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB956572). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 44 46 32 46 30 41 ={DF2F0A 0028: 39 38 2d 36 45 33 35 2d 98-6E35- 0030: 34 33 37 39 2d 41 42 33 4379-AB3 0038: 33 2d 41 30 33 30 33 45 3-A0303E 0040: 46 37 34 42 32 41 7d 20 F74B2A} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 32 20 00 02 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer EVO Source: Windows Update Agent Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB958644). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 39 33 39 37 41 32 ={9397A2 0028: 31 46 2d 32 34 36 43 2d 1F-246C- 0030: 34 35 33 42 2d 41 43 30 453B-AC0 0038: 35 2d 36 35 42 46 34 46 5-65BF4F 0040: 43 36 42 36 38 42 7d 20 C6B68B} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 31 20 00 01 . Date: 2/6/2010 Time: 12:02:18 AM Type: Error User: N/A Computer: EVO Source: Windows Update Agent Category: Installation Event ID: 20 Installation Failure: Windows failed to install the following update with error 0x80070002: Security Update for Windows XP (KB923561). For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 57 69 6e 33 32 48 52 65 Win32HRe 0008: 73 75 6c 74 3d 30 78 38 sult=0x8 0010: 30 30 37 30 30 30 32 20 0070002 0018: 55 70 64 61 74 65 49 44 UpdateID 0020: 3d 7b 33 31 30 41 34 43 ={310A4C 0028: 30 38 2d 35 39 33 44 2d 08-593D- 0030: 34 31 41 33 2d 42 42 35 41A3-BB5 0038: 37 2d 38 33 42 33 38 36 7-83B386 0040: 44 37 37 33 42 35 7d 20 D773B5} 0048: 52 65 76 69 73 69 6f 6e Revision 0050: 4e 75 6d 62 65 72 3d 31 Number=1 0058: 30 33 20 00 03 . Thank you, Andrew

    Read the article

  • Hard drive failed, suspected filesystem corruption, still cannot salvage any data from harddrive

    - by Hippy-Head
    Firstly, I am terribly sorry if this is a duplicate, but I couldn't find a similar issue to mine, so here goes. I have a 1TB hdd bought around 8 months ago used as backup hard drive. I have not used the drive for a period of time whatsoever, and when I was trying to get back to some files on it, it was completely wiped just like that. At first it would not boot I tried everything from command line chkdsk and filesystem recovery software to rebuilt it. After a few attempts I managed to initialize it, at that time it was an achievement. The problems started when I tried to recover the data inside, I have used A LOT of software free and commercial software on both Mac and Windows, with the help of cmd or Terminal commands, however no data of any kind was recovered, even after leaving it thoroughly scan for around 9-10 hours all night sometimes longer, with no results at all. I am somewhat desperate, I am usually good at retrieving data from corrupt hard drives, but this is not the case. Call me paranoid, but I do not want to give it to someone to fix it for me, as I have a lot of photos and personal stuff that I do not want anyone to see.

    Read the article

  • Try out Windows Phone 7 on your PC today

    - by Matthew Guay
    Anticipation has been building for the new Windows Phone 7 Series ever since Microsoft unveiled it at the Mobile World Congress in February.  Now, thanks to free developer tools, you can get a first-hand experience of the basic Windows Phone 7 Series devices on your PC. Windows Phone 7 Series represents a huge change in the mobile field for Microsoft, bringing the acclaimed Zune HD UI to an innovative phone platform.  Windows Mobile has often been criticized for being behind other Smartphone platforms, but Microsoft seeks to regain the lead with this new upcoming release.  A platform must have developers behind it to be useful, so they have released a full set of free development tools so anyone can make apps for it today.  Or, if you simply want to play with Windows Phone 7, you can use the included emulator to try out the new Metro UI.  Here’s how to do this today on your Vista or 7 computer. Please note: These tools are a Customer Technology Preview release, so only install them if you’re comfortable using pre-release software. Getting Started First, download the Windows Phone Developer Tools CTP (link below), and run the installer.  This will install the Customer Technology Preview (CTP) versions of Visual Studio 2010 Express for Windows Phone, Windows Phone Emulator, Silverlight for Windows Phone, and XNA 4.0 Game Studio on your computer, all of which are required and cannot be installed individually. Accept the license agreement when prompted. Click “Install Now” to install the tools you need.  The only setup customization option is where to save the files, so choose Customize if you need to do so. Setup will now automatically download and install the components you need, and will additionally download either 32 or 64 bit programs depending on your operating system. About halfway thorough the installation, you’ll be prompted to reboot your system.  Once your computer is rebooted, setup will automatically resume without further input.   When setup is finished, click “Run the Product Now” to get started. Running Windows Phone 7 on your PC Now that you’ve got the Windows Phone Developer tools installed, it’s time to get the Windows Phone emulator running.  If you clicked “Run the Product Now” when the setup finished, Visual Studio 2010 Express for Windows Phone should have already started.   If not, simply enter “visual studio” in your start menu search and select “Microsoft Visual Studio 2010 Express for Windows Phone”. Now, to run the Windows Phone 7 emulator, we have to test an application.  So, even if you don’t know how to program, we can open a phone application template, and then test it to run the emulator.  First, click New Project on the left hand side of the front page. Any of the application templates would work for this, but here let’s select “Windows Phone Application”, and then click Ok. Here’s your new application template, which already contains the basic phone application framework.  This is where you’d start if you want to develop a Windows Phone app, but for now we just want to see Windows Phone 7 in action. So, to run the emulator, click Debug in the menu and then select Start Debugging. Your new application will launch inside the Windows Phone 7 Series emulator.  The default template doesn’t give us much, but it does show an example application running in Windows Phone 7.   Exploring Windows Phone 7 Click the Windows button on the emulator to go to the home screen.  Notice the Zune HD-like transition animation.  The emulator only includes Internet Explorer, your test application, and a few settings. Click the arrow on the right to see the available applications in a list. Settings lets you change the theme, regional settings, and the date and time in your emulator.  It also has an applications settings pane, but this currently isn’t populated. The Time settings shows a unique Windows Phone UI. You can return to the home screen by pressing the Windows button.  Here’s the Internet Explorer app running, with the virtual keyboard open to enter an address.  Please note that this emulator can also accept input from your keyboard, so you can enter addresses without clicking on the virtual keyboard. And here’s Google running in Internet Explorer on Windows Phone 7. Windows Phone 7 supports accelerometers, and you can simulate this in the emulator.  Click one of the rotate buttons to rotate the screen in that direction. Here’s our favorite website in Internet Explorer on Windows Phone 7 in landscape mode. All this, running right inside your Windows 7 desktop… Developer tools for Windows Phone 7 Although it may be fun to play with the Windows Phone 7 emulator, developers will be more excited to actually be able to create new and exciting apps for it.  The Windows Phone Developer Tools download includes Visual Studio Express and XNA Game Studio 4.0 which lets you create enticing games and apps for Windows Phones.  All development for Windows Phones will be in C#, Silverlight, and the XNA game framework.  Visual Studio Express for Windows Phone includes templates for these, and additionally has code samples to help you get started with development. Conclusion Many features are still not functional in this preview version, such as the search button and most of the included applications.  However, this still gives you a great way to experience firsthand the future of the Windows Phone platform.  And, for developers, this is your chance to set your mark on the Windows Phone 7 Series even before it is released to the public.  Happy playing and developing! Links Download Windows Phone Developer Tools CTP Windows Phone Developer Site Similar Articles Productive Geek Tips Keep Track of Homework Assignments with SoshikuWeekend Fun: Watch Television On Your PC With TVUPlayerEasily Manage Your Downloads with Download StatusbarCreate a Shortcut or Hotkey to Mute the System Volume in WindowsHow-To Geek on Lifehacker: How to Make Windows Vista Less Annoying TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >