Search Results

Search found 8328 results on 334 pages for 'hope i helped'.

Page 311/334 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

• How I Work: Staying Productive Whilst Traveling

  - by BuckWoody

  I travel a lot. Not like some folks that are gone every week, mind you, although in the last month I’ve been to: Cambridge, UK; Anchorage, AK; San Jose, CA; Copenhagen, DK, Boston, MA; and I’m currently en-route to Anaheim, CA.  While this many places in a month is a bit unusual for me, I would say I travel frequently. I’ve travelled most of my 28+ years in IT, and at one time was a consultant traveling weekly.   With that much time away from my primary work location, I have to find ways to stay productive. Some might say “just rest – take a nap!” – but I’m not able to do that. For one thing, I’m a very light sleeper and I’ve never slept on a plane - even a 30+ hour trip to New Zealand in Business Class - so that just isn’t option. I also am not always in the plane, of course. There’s the hotel, the taxi/bus/train, the airport and then all that over again when I arrive. Since my regular jobs have many demands, I have to get work done.   Note: No, I’m not always focused on work. I need downtime just like everyone else. Sometimes I just think, watch a movie or listen to tunes – and I give myself permission to do that anytime – sometimes the whole trip. I have too fewheartbeats left in life to only focus on work – it’s just not that important, and neither am I. Some of these tasks are letters to friends and family, or other personal things. What I’m talking about here is a plan, not some task list I have to follow. When I get to the location I’m traveling to, I always build in as much time as I can to ensure I enjoy those sights and the people I’m with. I would find traveling to be a waste if not for that.   The Unrealistic Expectation As I would evaluate the trip I was taking – say a 6-8 hour flight – I would expect to get 10-12 hours of work done. After all, there’s the time at the airport, the taxi and so on, and then of course the time in the air with all of the room, power, internet and everything else I needed to get my work done. I would pile up tasks at home, pack my bags, and head happily to the magical land of the TSA.   Right. On return from the trip, I had accomplished little, had more e-mails and other work that had piled up, and I was tired, hungry, and unorganized. This had to change. So, I decided to do three things: Segment my work Set realistic expectations Plan accordingly  Segmenting By Available Resources The first task was to decide what kind of work I could do in each location – if any. I found that I was dependent on a few things to get work done, such as power, the Internet, and a place to sit down. Before I fly, I take some time at home to get all of the work I’d like to accomplish while away segmented into these areas, and print that out on paper, which goes in my suit-coat pocket along with a mechanical pencil. I print my tickets, and I’m all set for the adventure ahead. Then I simply do each kind of work whenever I’m in that situation. No power There are certain times when I don’t have power available. But not only that, I might not even be able to use most of my electronics. So I now schedule as many phone calls as I can for the taxi/bus/train ride and the airports as I can. I have a paper notebook (Moleskine, of course) and a pencil and I print out any notes or numbers I need prior to the trip. Once I’m airborne or at the airport, I work on my laptop. I check and respond to e-mails, create slides, write code, do architecture, whatever I can.  If I can’t use any electronics, or once the power runs out, I schedule time for reading. I can read at the airport or anywhere, actually, even in-flight or any other transport. I “read with a pencil”, meaning I take a lot of notes, which I liketo put in OneNote, but since in most cases I don’t have power, I use the Moleskine to do that. Speaking of which, sometimes as I’m thinking I come up with new topics, ideas, blog posts, or things to teach in my classes. Once again I take out the notebook and write it down. All of these notes get a check-mark when I get back to the office and transfer the writing to OneNote. I’ve tried those “smart pens” and so on to automate this, but it just never works out. Pencil and paper are just fine. As I mentioned, sometime I just need to think. I’ll do nothing, and let my mind wander, thinking of nothing in particular, or some math problem or science question I’m interested in. My only issue with this is that I communicate tothink, and I don’t want to drive people crazy by being that guy that won’t shut up, so I think in a different way. Power, but no Internet or Phone If I have power but no Internet or phone, I focus on the laptop and the tablet as before, and I also recharge my other gadgets. Power, Internet, Phone and a Place to Work At first I thought that when I arrived at the hotel or event I could get the same amount of work done that I do at the office. Not so. There’s simply too many distractions, things you need, or other issues that allow this. Of course, Ican work on any device, read, think, write or whatever, but I am simply not as productive as I am in my home office. So I plan for about 25-50% as much work getting done in this environment as I think I could really do. I’ve done some measurements, and this holds out to be true almost every time. The key is that I re-set my expectations (and my co-worker’s expectations as well) that this is the case. I use the Out-Of-Office notices to let people know that I’m just not going to be 100% at this time – it’s hard for everyone, but it’s more honest and realistic, and I’d rather they know that – and that I realize that – than to let them think I’m totally available. Because I’m not – I’m traveling. I don’t tend to put too much detail, because after all I don’t necessarily want to let people know when I’m not home :) but I do think it’s important to let people that depend on my know that I’ll get back with them later. I hope this helps you think through your own methodology of staying productive when you travel. Or perhaps you just go offline, and don’t worry about any of this – good for you! That’s completely valid as well.   (Oh, and yes, I wrote this at 35K feet, on Alaska Airlines on a trip. :)  Practice what you preach, Buck.)

  Read the article

• Agilist, Heal Thyself!

  - by Dylan Smith

  I’ve been meaning to blog about a great experience I had earlier in the year at Prairie Dev Con Calgary.  Myself and Steve Rogalsky did a session that we called “Agilist, Heal Thyself!”.  We used a format that was new to me, but that Steve had seen used at another conference.  What we did was start by asking the audience to give us a list of challenges they had had when adopting agile.  We wrote them all down, then had everybody vote on the most interesting ones.  Then we split into two groups, and each group was assigned one of the agile challenges.  We had 20 minutes to discuss the challenge, and suggest solutions or approaches to improve things.  At the end of the 20 minutes, each of the groups gave a brief summary of their discussion and learning's, then we mixed up the groups and repeated with another 2 challenges. The 2 groups I was part of had some really interesting discussions, and suggestions: Unfinished Stories at the end of Sprints The first agile challenge we tackled, was something that every single Scrum team I have worked with has struggled with.  What happens when you get to the end of a Sprint, and there are some stories that are only partially completed.  The team in question was getting very de-moralized as they felt that every Sprint was a failure as they never had a set of fully completed stories. How do you avoid this? and/or what do you do when it happens? There were 2 pieces of advice that were well received: 1. Try to bring stories to completion before starting new ones.  This is advice I give all my Scrum teams.  If you have a 3-week sprint, what happens all too often is you get to the end of week 2, and a lot of stories are almost done; but almost none are completely done.  This is a Bad Thing.  I encourage the teams I work with to only start a new story as a very last resort.  If you finish your task look at the stories in progress and see if there’s anything you can do to help before moving onto a new story.  In the daily standup, put a focus on seeing what stories got completed yesterday, if a few days go by with none getting completed, be sure this fact is visible to the team and do something about it.  Something I’ve been doing recently is introducing WIP (Work In Progress) limits while using Scrum.  My current team has 2-week sprints, and we usually have about a dozen or stories in a sprint.  We instituted a WIP limit of 4 stories.  If 4 stories have been started but not finished then nobody is allowed to start new stories.  This made it obvious very quickly that our QA tasks were our bottleneck (we have 4 devs, but only 1.5 testers).  The WIP limit forced the developers to start to pickup QA tasks before moving onto the next dev tasks, and we ended our sprints with many more stories completely finished than we did before introducing WIP limits. 2. Rather than using time-boxed sprints, why not just do away with them altogether and go to a continuous flow type approach like KanBan.  Limit WIP to keep things under control, but don’t have a fixed time box at the end of which all tasks are supposed to be done.  This eliminates the problem almost entirely.  At some points in the project (releases) you need to be able to burn down all the half finished stories to get a stable release build, but this probably occurs less often than every sprint, and there are alternative approaches to achieve it using branching strategies rather than forcing your team to try to get to Zero WIP every 2-weeks (e.g. when you are ready for a release, create a new branch for any new stories, but finish all existing stories in the current branch and release it). Trying to Introduce Agile into a team with previous Bad Agile Experiences One of the agile adoption challenges somebody described, was he was in a leadership role on a team he had recently joined – lets call him Dave.  This team was currently very waterfall in their ALM process, but they were about to start on a new green-field project.  Dave wanted to use this new project as an opportunity to do things the “right way”, using an Agile methodology like Scrum, adopting TDD, automated builds, proper branching strategies, etc.  The problem he was facing is everybody else on the team had previously gone through an “Agile Adoption” that was a horrible failure.  Dave blamed this failure on the consultant brought in previously to lead this agile transition, but regardless of the reason, the team had very negative feelings towards agile, and was very resistant to trying it out again.  Dave possibly had the authority to try to force the team to adopt Agile practices, but we all know that doesn’t work very well.  What was Dave to do? Ultimately, the best advice was to question *why* did Dave want to adopt all these various practices. Rather than trying to convince his team that these were the “right way” to run a dev project, and trying to do a Big Bang approach to introducing change.  He would be better served by identifying problems the team currently faces, have a discussion with the team to get everybody to agree that specific problems existed, then have an open discussion about ways to address those problems.  This way Dave could incrementally introduce agile practices, and he doesn’t even need to identify them as “agile” practices if he doesn’t want to.  For example, when we discussed with Dave, he said probably the teams biggest problem was long periods without feedback from users, then finding out too late that the software is not going to meet their needs.  Rather than Dave jumping right to introducing Scrum and all it entails, it would be easier to get buy-in from team if he framed it as a discussion of existing problems, and brainstorming possible solutions.  And possibly most importantly, don’t try to do massive changes all at once with a team that has not bought-into those changes.  Taking an incremental approach has a greater chance of success. I see something similar in my day job all the time too.  Clients who for one reason or another claim to not be fans of agile (or not ready for agile yet).  But then they go on to ask me to help them get shorter feedback cycles, quicker delivery cycles, iterative development processes, etc.  It’s kind of funny at times, sometimes you just need to phrase the suggestions in terms they are using and avoid the word “agile”. PS – I haven’t blogged all that much over the past couple of years, but in an attempt to motivate myself, a few of us have accepted a blogger challenge.  There’s 6 of us who have all put some money into a pool, and the agreement is that we each need to blog at least once every 2-weeks.  The first 2-week period that we miss we’re eliminated.  Last person standing gets the money.  So expect at least one blog post every couple of weeks for the near future (I hope!).  And check out the blogs of the other 5 people in this blogger challenge: Steve Rogalsky: http://winnipegagilist.blogspot.ca Aaron Kowall: http://www.geekswithblogs.net/caffeinatedgeek Tyler Doerkson: http://blog.tylerdoerksen.com David Alpert: http://www.spinthemoose.com Dave White: http://www.agileramblings.com (note: site not available yet.  should be shortly or he owes me some money!)

  Read the article

• First PC Build (Part 1)

  - by Anthony Trudeau

  Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

  Read the article

• CodePlex Daily Summary for Monday, September 03, 2012

  CodePlex Daily Summary for Monday, September 03, 2012Popular ReleasesMetodología General Ajustada - MGA: 03.01.03: Cambios Aury: Ajuste del margen del reporte. Visualización de la columna de Supuestos en la parte del módulo de Decisión. Cambios John: Integración de código con cambios enviados por Aury Niño. Generación de instaladores. Soporte técnico por correo electrónico y telefónico.Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...Thisismyusername's codeplex page.: HTML5 Mulititouch Fruit Ninja Proof of Concept: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. Sorry this example doesn't have great graphics. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but since I'm only using a Codeplex page and most mobile devices can't open .zip files, the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.TSQL Code Smells Finder: POC 1.01: Proof of concept 1.01 TSQLDomTest.ps1 and Errors.Txt are requiredConfuser: Confuser build 76542: This is a build of changeset 76542.Reactive State Machine: ReactiveStateMachine-beta: TouchStateMachine now supports Microsoft Surface 2.0 SDK. The TouchStateMachine is an extension to the Reactive State Machine. Reactive State Machine uses NuGet for dependency managementSharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...New ProjectsBPVote4PPT: BPVote For PowerPointCosmo OS: La semplicità in un OSFinancial Analytic Tools: C#.Net Financial Analytic ToolsGeminiMVC: An Open Source CMS written in ASP.net MVC 4 with speed, extensibility, and ease-of-us in mind.JQuery SharePoint Autocomplete People Picker: This JQUery bundle provides an autocomplete people picker based on SharePoint profiles. It can be hosted on the SharePoint itself or on remote applications.Kerbal Space Program PartModule Library: This project is designed to add various functionalities to custom parts for the space program simulation game Kerbal Space Program.KeyboardRemapper: This tool to remaps keys in the keyboard. If you have more than one keyboard or an additional keypad, you can remap the keys of the each keyboard independentlyKHStudent: ??????Localized DataAnnotations with T4 templates: Simplified DataAnnotations localization using T4 templates.MfcLightToolkit: Supports development for small and simple MFC application. Provides asynchronous programming model like .NET, file download, easy control resizing, and so on.Müslüm ÖZTÜRK Code Lib: Test amaçli olusturulan projemdirPolska: Testproject in how a polish grammerprogram can look like.QueueLessApp: Here is the codeRusIS.CMS: aaaSGPS: Projeto de controle de produtos e serviçosStemmersNet: Stemmers pack for .Net FrameworkTrabajo Final de Ingenieria - Javier Vallejos: Tesis Final de la carrera de Ingenieria - Universidad Abierta Interamericana.TSQL Code Smells Finder: TSQL 'smells' findersXNA and Data Driven Design: This project includes links for XNA and Data Driven DesignXNA and System Testing: This project includes code for XNA and System TestingYUGI-AR Project: an open source project for yugioh based augmented reality???????? ? ?????????????: ???? ??????? ??????? ?????????????? ??????????? ?????????? ??? ? ????? ?????? ? ? ??? ??? ????? ? ??? ?????????? ????????????.

  Read the article

• D2K to OA Framework Transition

  - by PRajkumar

  What is the difference between D2K form and OA Framework? It is a very innocent but important question for someone that desires to make transition from D2K to OA Framework. I hope you have already read and implemented OA Framework Getting Started. I will re-visit my own experience of implementing HelloWorld program in "OA Framework". When I implemented HelloWorld a year ago, I had no clue as to what I was doing & why I was doing those steps. I merely copied the steps from Oracle Tutorial without understanding them. Hence in this blog, I will try to explain in simple manner the meaning of OA Framework HelloWorld Program and compare the steps to D2K form [where possible]. To keep things simple, only basics will be discussed. Following key Steps were needed for HelloWorld Step 1 Create a new Workspace and a new Project as dictated by Oracle's tutorial. When defining project, you will specify a default package, which in this case was oracle.apps.ak.hello This means the following: - ak is the short name of the Application in Oracle           [means fnd_applications.short_name] hello is the name of your project Step 2 Next, you will create a OA Page within hello project Think OA Page as the fmx file itself in D2K. I am saying so because this page gets attached to the form function. This page will be created within hello project, hence the package name oracle.apps.ak.hello.webui Note the webui, it is a convention to have page in webui, means this page represents the Web User Interface You will assign the default AM [OAApplicationModule]. Think of AM "Connection Manager" and "Transaction State Manager" for your page          I can't co-relate this to anything in D2k, as there is no concept of Connection Pooling and that D2k is not stateless. Reason being that as soon as you kick off a D2K Form, it connects to a single session of Oracle and sticks to that single Oracle database session. So is not the case in OAF, hence AM is needed. Step 3 You create Region within the Page. ·         Region is what will store your fields. Text input fields will be of type messageTextInput. Think of Canvas in D2K. You can have nested regions. Stacked Canvas in D2K comes the closest to this component of OA Framework Step 4 Add a button to one of the nested regions The itemStyle should be submitButton, in case you want the page to be submitted when this button is clicked There is no WHEN-BUTTON-PRESSED trigger in OAF. In Framework, you will add a controller java code to handle events like Form Submit button clicks. JDeveloper generates the default code for you. Primarily two functions [should I call methods] will be created processRequest [for UI Rendering Handling] and processFormRequest          Think of processRequest as WHEN-NEW-FORM-INSTANCE, though processRequest is very restrictive. Note What is the difference between processRequest and processFormRequest? These two methods are available in the Default Controller class that gets created. processFormRequest This method is commonly used to react/respond to the event that has taken place, for example click of a button. Some examples are if(oapagecontext.getParameter("Cancel") != null) (Do your processing for Cancellation/ Rollback) if(oapagecontext.getParameter("Submit") != null) (Do your validations and commit here) if(oapagecontext.getParameter("Update") != null) (Do your validations and commit here) In the above three examples, you could be calling oapagecontext.forwardImmediately to re-direct the page navigation to some other page if needed. processRequest In this method, usually page rendering related code is written. Effectively, each GUI component is a bean that gets initialised during processRequest. Those who are familiar with D2K forms, something like pre-query may be written in this method. Step 5 In the controller to access the value in field "HelloName" the command is String userContent = pageContext.getParameter("HelloName"); In D2k, we used :block.field. In OAFramework, at submission of page, all the field values get passed into to OAPageContext object. Use getParameter to access the field value To set the value of the field, use OAMessageTextInputBean field HelloName = (OAMessageTextInputBean)webBean.findChildRecursive("HelloName"); fieldHelloName.setText(pageContext,"Setting the default value" ); Note when setting field value in controller: Note 1. Do not set the value in processFormRequest Note 2. If the field comes from View Object, then do not use setText in controller Note 3. For control fields [that are not based on View Objects], you can use setText to assign values in processRequest method Lets take some notes to expand beyond the HelloWorld Project Note 1 In D2K-forms we sort of created a Window, attached to Canvas, and then fields within that Canvas. However in OA Framework, think of Page being fmx/Window, think of Region being a Canvas, and fields being within Regions. This is not a formal/accurate understanding of analogy between D2k and Framework, but is close to being logical. Note 2 In D2k, your Forms fmb file was compiled to fmx. It was fmx file that was deployed on mid-tier. In case of OAF, your OA Page is nothing but a XML file. We call this MDS [meta data]. Whatever name you give to "Page" in OAF, an XML file of the same name gets created. This xml file must then be loaded into database by using XML Importer command. Note 3 Apart from MDS XML file, almost everything else is merely deployed to your mid-tier. Usually this is underneath $JAVA_TOP/oracle/apps/../.. All java files will go underneath java top/oracle/apps/../.. etc. Note 4 When building tutorial, ignore the steps for setting "Attribute Sets". These are not mandatory. Oracle might just have developed their tutorials without including these. Think of these like Visual Attributes of D2K forms Note 5 Controller is where you will write any java code in OA Framework. You can create a Controller per Page or have a different Controller for each of the Regions with the same Page. Note 6 In the method processFormRequest of the Controller, you can access the values of the page by using notation pageContext.getParameter("<fieldname here>"). This method processFormRequest is executed when the OAF Screen/Page is submitted by click of a button. Note 7 Inside the controller, all the Database Related interactions for example interaction with View Objects happen via Application Module. But why so? Because Application Module Manages the transaction state of the Application. OAApplicationModuleImpl oaapplicationmoduleimpl = OAApplicationModuleImpl)oapagecontext.getApplicationModule(oawebbean); OADBTransaction oadbtransaction = OADBTransaction)oaapplicationmoduleimpl.getDBTransaction(); Note 8 In D2K, we have control block or a block based on database view. Similarly, in OA Framework, if the field does not have view Object attached, then it is like a control field. Hence in HelloWorld example, field HelloName is a control field [in D2K terminology]. A view Object can either be based on a view/table, synonym or on a SQL statement. Note 9 I wish to access the fields in multi record block that is based on view Object. Can I do this in Controller? Sure you can. To traverse through those records, do the below ·         Get the reference to the View Object using (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("VO Name Here") ·         Loop through the records in View Objects using count returned from oaviewobject.getFetchedRowCount() ·         For each record, fetch the value of the fields within the loop as oracle.jbo.Row row = oaviewobject.getRowAtRangeIndex(loop index here); (String)row.getAttribute("Column name of VO here ");

  Read the article

• PASS Summit – looking back on my first time

  - by Fatherjack

    So I was lucky enough to get my first experience of PASS Summit this year and took some time beforehand to read some blogs and reference material to get an idea on what to do and how to get the best out of my visit. Having been to other conferences – technical and non-technical – I had a reasonable idea on the routine and what to expect in general. Here is a list of a few things that I have learned/remembered as the week has gone by. Wear comfortable shoes. This actually needs to be broadened to Take several pairs of comfortable shoes. You will be spending many many hours, for several days one after another. Having comfortable feet that can literally support you for the duration will make the week in general a whole lot better. Not only at the conference but getting to and from you could well be walking. In the evenings you will be walking around town and standing talking in various bars and clubs. Looking back, on some days I was on my feet for over 20 hours. Make friends. This is a given for the long term benefits it brings but there is also an immediate reward in being at a conference with a friend or two. Some events are bigger and more popular than others and some have the type of session that every single attendee will want to be in. This is great for those that get in but if you are in the bathroom or queuing for coffee and you miss out it sucks. Having a friend that can get in to a room and reserve you a seat is a great advantage to make sure you get the content that you want to see and still have the coffee that you need. Don’t go to every session you want to see This might sound counter intuitive and it relies on the sessions being recorded in some way to guarantee you don’t totally miss out. Both PASS Summit and SQL Bits sessions are recorded (summit is audio, SQLBits is video) and this means that if you get into a good conversation with someone over a coffee you don’t have to break it up to go to a session. Obviously there is a trade-off here and you need to decide on the tipping point for yourself but a conversation at a place like this could make a big difference to the next contract or employer you have or it might simply be great catching up with some friends you don’t see so often. Go to at least one session you don’t want to Again, this will seem to be contrary to normal logic but there is no reason why you shouldn’t learn about a part of SQL Server that isn’t part of your daily routine. Not only will you learn something new but you will also pick up on the feelings and attitudes of the people in the session. So, if you are a DBA, head off to a BI session and so on. You’ll hear BI speakers speaking to a BI audience and get to understand their point of view and reasoning for making the decisions they do. You will also appreciate the way that your decisions and instructions affect the way they have to work. This will help you a lot when you are on a project, working with multiple teams and make you all more productive. Socialise While you are at the conference venue, speak to people. Ask questions, be interested in whoever you are speaking to. You get chances to talk to new friends at breakfast, dinner and every break between sessions. The only people that might not talk to you would be speakers that are about to go and give a session, in most cases speakers like peace and quiet before going on stage. Other than that the people around you are just waiting for someone to talk to them so make the first move. There is a whole lot going on outside of the conference hours and you should make an effort to join in with some of this too. At karaoke evenings or just out for a quiet drink with a few of the people you meet at the conference. Either way, don’t be a recluse and hide in your room or be alone out in the town. Don’t talk to people Once again this sounds wrong but stay with me. I have spoken to a number of speakers since Summit 2013 finished and they have all mentioned the time it has taken them to move about the conference venue due to people stopping them for a chat or to ask a question. 45 minutes to walk from a session room to the speaker room in one case. Wow. While none of the speakers were upset about this sort of delay I think delegates should take the situation into account and possibly defer their question to an email or to a time when the person they want is clearly less in demand. Give them a chance to enjoy the conference in the same way that you are, they may actually want to go to a session or just have a rest after giving their session – talking for 75 minutes is hard work, taking an extra 45 minutes right after is unbelievable. I certainly hope that they get good feedback on their sessions and perhaps if you spoke to a speaker outside a session you can give them a mention in the ‘any other comments’ part of the feedback, just to convey your gratitude for them giving up their time and expertise for free. Say thank you I just mentioned giving the speakers a clear, visible ‘thank you’ in the feedback but there are plenty of people that help make any conference the success it is that would really appreciate hearing that their efforts are valued. People on the registration desk, volunteers giving schedule guidance and directions, people on the community zone are all volunteers giving their time to help you have the best experience possible. Send an email to PASS and convey your thoughts about the work that was done. Maybe you want to be a volunteer next time so you could enquire how you get into that position at the same time. This isn’t an exclusive list and you may agree or disagree with the points I have made, please add anything you think is good advice in the comments. I’d like to finish by saying a huge thank you to all the people involved in planning, facilitating and executing the PASS Summit 2013, it was an excellent event and I know many others think it was a totally worthwhile event to attend.

  Read the article

• How to Control Screen Layouts in LightSwitch

  - by ChrisD

  Visual Studio LightSwitch has a bunch of screen templates that you can use to quickly generate screens. They give you good starting points that you can customize further. When you add a new screen to your project you see a set of screen templates that you can choose from. These templates lay out all the related data you choose to put on a screen automatically for you. And don’t under estimate them; they do a great job of laying out controls in a smart way. For instance, a tab control will be used when you select more than one related set of data to display on a screen. However, you’re not limited to taking the layout as is. In fact, the screen designer is pretty flexible and allows you to create stacks of controls in a variety of configurations. You just need to visualize your screen as a series of containers that you can lay out in rows and columns. You then place controls or stacks of controls into these areas to align the screen exactly how you want. If you’re new in Visual Studio LightSwitch, you can see this tutorial. OK, Let’s start with a simple example. I have already designed my data entities for a simple order tracking system similar to the Northwind database. I also have added a Search Data  Screen to search my Products already. Now I will add a new Details Screen for my Products and make it the default screen via the “Add New Screen” dialog: The screen designer picks a simple layout for me based on the single entity I chose, in this case Product. Hit F5 to run the application, select a Product on the search screen to open the Product Details Screen. Notice that it’s pretty simple because my entity is simple. Click the “Customize” button in the top right of the screen so we can start tweaking it. The left side of the screen shows the containership of controls and data bindings (called the content tree) and the right side shows the live preview with data. Notice that we have a simple layout of two rows but only one row is populated (with a vertical stack of controls in this case). The bottom row is empty. You can envision the screen like this: Each container will display a group of data that you select. For instance in the above screen, the top row is set to a vertical stack control and the group of data to display is coming from Product. So when laying out screens you need to think in terms of containers of controls bound to groups of data. To change the data to which a container is bound, select the data item next to the container: You can select the “New Group” item in order to create more containers (or controls) within the current container. For instance to totally control the layout, select the Product in the top row and hit the delete key. This will delete the vertical stack and therefore all the controls on the screen. The content tree will still have two rows, but the rows are now both empty. If you want a layout of four containers (two rows and two columns) then select “New Group” for the data item and then change the vertical stack control to “Two Columns” for both of the rows as shown here: You can keep going on and on by selecting new groups and choosing between rows or columns. Here’s a layout with 8 containers, 4 rows and 2 columns: And here is a layout with 7 content areas; one row across the top of the screen and three rows with two columns below that: When you select Choose Content and select a data item like Product it will populate all the controls within the container (row or column in a vertical stack) however you have complete control on what to display within each group. You can delete fields you don’t want to display and/or change their controls. You can also change the size of controls and how they display by changing the settings in the properties window. If you are in the Screen Designer (and not the customization mode like we are here) you can also drag-drop data items from the left-hand side of the screen to the content tree. Note, however, that not all areas of the tree will allow you to drop a data item if there is a binding already set to a different set of data. For instance you can’t drop a Customer ID into the same group as a Product if they originate from different entities. To get around this, all you need to do is create a new group and content area as shown above. Let’s take a more complex example that deals with more than just product. I want to design a complex screen that displays Products and their Category, as well as all the OrderDetails for which that product is selected. This time I will create a new screen and select List and Details, select the Products screen data, and include the related OrderDetails. However I’m going to totally change the layout so that a Product grid is at the top left and below that is the selected Product detail. Below that will be the Category text fields and image in two columns below. On the right side I want the OrderDetails grid to take up the whole right side of the screen. All this can be done in customization mode while you’re debugging the application. To do this, I first deleted all the content items in the tree and then re-created the content tree as shown in the image below. I also set the image to be larger and the description textbox to be 5 rows using the property window below the live preview. I added the green lines to indicate the containers and show how it maps to the content tree (click to enlarge): I hope this demystifies the screen designer a little bit. Remember that screen templates are excellent starting points – you can take them as-is or customize them further. It takes a little fooling around with customizing screens to get them to do exactly what you want but there are a ton of possibilities once you get the hang of it. Stay tuned for more information on how to create your own screen templates that show up in the “Add New Screen” dialog. Enjoy! The tutorial that might be interested: Adding Custom Control In LightSwitch

  Read the article

• Calculated Fields - Idiosyncracies

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Calculated Fields and some of their Idiosyncrasies Did you try to write a calculate field formula directly into the screen? Good Luck – You’ll need it! Calculated Fields are a sophisticated OOB feature of SharePoint, so you could think that they are best left to the end users – at least to the power users. But they reach their limits before the “Professionals “do, and the tough ones come back to us anyway. Back to business; the simpler the formula, the easier it is. Still, use your favorite editor to write it, then cut it and paste it to the ridiculously small window. What about complex formulae? Write them in steps! Here is a case in point and an idiosyncrasy or two. Our welders need to be certified and recertified every two years. Some of them are certifiable…., but I digress. To be certified you need to pass an eye exam, and two more tests – test A and test B. for each of those you have an expiry date. When renewed, each expiry date is advanced by two years from the date of renewal. My users wanted a visual clue so that when the supervisor looks at the list, she’ll have a KPI symbol telling her if anything expired (Red), is going to expire within the next 90 days (Yellow) or is not to be worried about (green). Not all the dates are filled and any blank date implies a complete lack of certification in the particular requirement. Obviously, I needed to figure the minimal of these 3 dates – a simple enough formula: =MIN([Date_EyeExam], {Date_TestA], [Date_TestB]). Aha! Here is idiosyncrasy #1. When one of the dates is a null, MIN(Date1, Date2) returns the non null date. Null is construed as “Far, far away”. The funny thing is that when you compare it to Today, the null is the lesser one. So a null it is less than today, but not when MIN is calculated. Now, to me the fact that the welder does not have an exam date, is synonymous with his exam being prehistoric, or at least past due. So here is what I did: Solution: Let’s set a blank date to 1/1/1800. How will we do that? Use the IF. IF([Field] rel relValue, TrueValue, FalseValue). rel is any relationship operator <, >, <=, >=, =, <>. If the field is related to the relValue as prescribed, the “IF” returns the TrueValue, otherwise it returns the FalseValue. Thus: =IF([SomeDate]="",1/1/1800,[SomeDate]) will return 1/1/1800 if the date is blank and the date itself if not. So, using this formula, if the welder missed an exam, the returned exam date will be far in the past. It would be nice if we could take such a formula and make it into a reusable function. Alas, here is a calculated field serious shortcoming: You cannot write subs and functions!! Aha, but we can use interim calculated fields! So let’s create 3 calculated fields as follows: 1: c_DateTestA as a calculated field of the date type, with the formula:  IF([Date_TestA]="",1/1/1800,[Date_TestA]) 2: c_DateTestB as a calculated field of the date type, with the formula:  IF([Date_TestB]="",1/1/1800,[Date_TestB]) 3: c_DateEyeExam as a calculated field of the date type, with the formula:  IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam]) And now use these to get c_MinDate. This is again a calculated field of type date with the formula: MIN(c_DateTestA, cDateTestB, c_DateEyeExam) Note that I missed the square parentheses. In “properly named fields – where there are no embedded spaces, we don’t need the square parentheses. I actually strongly recommend using underscores in place of spaces in all the field names in your lists. Among other things, it makes using CAML much simpler. Now, we still need to apply the KPI to this minimal date. I am going to use the available KPI graphics that come with SharePoint and are always available in your 12 hive. "/_layouts/images/kpidefault-2.gif" is the Red KPI "/_layouts/images/kpidefault-1.gif" is the Yellow KPI "/_layouts/images/kpidefault-0.gif" is the Green KPI And here is the nested IF formula that will do the trick: =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif", IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Nice! BUT when I tested, it did not work! This is Idiosyncrasy #2: A calculated field based on a calculated field based on a calculated field does not work. You have to stop at two levels! Back to the drawing board: We have to reduce by one level. How? We’ll eliminate the c_DateX items in the formula and replace them with the proper IF formulae. Notice that this needs to be done with precision. You are much better off in doing it in your favorite line editor, than inside the cramped space that SharePoint gives you. So here is the result: MIN(IF([Date_TestA]="",1/1/1800,[ Date_TestA]), IF([Date_TestB]="",1/1/1800,[ Date_TestB]), 1/1/1800), IF([Date_EyeExam]="",1/1/1800,[Date_EyeExam])) Note that I bolded the parentheses and painted them red. They have to match for this formula to work. Now we can leave the KPI formula as is and test again. This time with SUCCESS! Conclusion: build the inner functions first, and then embed them inside the outer formulae. Do this as long as necessary. Use your favorite line editor. Limit yourself to 2 levels. That’s all folks! Almost! As soon as I finished doing all of the above, my users added yet another level of complexity. They added another test, a test that must be passed, but never expires and asked for yet another KPI, this time in Black to denote that any test is not just past due, but altogether missing. I just finished this. Let’s hope it ends here! And OH, the formula  =IF(c_MinDate<=Today,"/_layouts/images/kpidefault-2.gif",IF(cMinDate<Today+90,"/_layouts/images/kpidefault-1.gif","/_layouts/images/kpidefault-0.gif")) Deals with “Today” and this is a subject deserving a discussion of its own!  That’s all folks?! (and this time I mean it)

  Read the article

• Making Those PanelBoxes Behave

  - by Duncan Mills

  I have a little problem to solve earlier this week - misbehaving <af:panelBox> components... What do I mean by that? Well here's the scenario, I have a page fragment containing a set of panelBoxes arranged vertically. As it happens, they are stamped out in a loop but that does not really matter. What I want to be able to do is to provide the user with a simple UI to close and open all of the panelBoxes in concert. This could also apply to showDetailHeader and similar items with a disclosed attrubute, but in this case it's good old panelBoxes.  Ok, so the basic solution to this should be self evident. I can set up a suitable scoped managed bean that the panelBoxes all refer to for their disclosed attribute state. Then the open all / close commandButtons in the UI can simply set the state of that bean for all the panelBoxes to pick up via EL on their disclosed attribute. Sound OK? Well that works basically without a hitch, but turns out that there is a slight problem and this is where the framework is attempting to be a little too helpful. The issue is that is the user manually discloses or hides a panelBox then that will override the value that the EL is setting. So for example. I start the page with all panelBoxes collapsed, all set by the EL state I'm storing on the session I manually disclose panelBox no 1. I press the Expand All button - all works as you would hope and all the panelBoxes are now disclosed, including of course panelBox 1 which I just expanded manually. Finally I press the Collapse All button and everything collapses except that first panelBox that I manually disclosed.  The problem is that the component remembers this manual disclosure and that overrides the value provided by the expression. If I change the viewId (navigate away and back) then the panelBox will start to behave again, until of course I touch it again! Now, the more astute amoungst you would think (as I did) Ah, sound like the MDS personalizaton stuff is getting in the way and the solution should simply be to set the dontPersist attribute to disclosed | ALL. Alas this does not fix the issue.  After a little noodling on the best way to approach this I came up with a solution that works well, although if you think of an alternative way do let me know. The principle is simple. In the disclosureListener for the panelBox I take a note of the clientID of the panelBox component that has been touched by the user along with the state. This all gets stored in a Map of Booleans in ViewScope which is keyed by clientID and stores the current disclosed state in the Boolean value.  The listener looks like this (it's held in a request scope backing bean for the page): public void handlePBDisclosureEvent(DisclosureEvent disclosureEvent) { String clientId = disclosureEvent.getComponent().getClientId(FacesContext.getCurrentInstance()); boolean state = disclosureEvent.isExpanded(); pbState.addTouchedPanelBox(clientId, state); } The pbState variable referenced here is a reference to the bean which will hold the state of the panelBoxes that lives in viewScope (recall that everything is re-set when the viewid is changed so keeping this in viewScope is just fine and cleans things up automatically). The addTouchedPanelBox() method looks like this: public void addTouchedPanelBox(String clientId, boolean state) { //create the cache if needed this is just a Map<String,Boolean> if (_touchedPanelBoxState == null) { _touchedPanelBoxState = new HashMap<String, Boolean>(); } // Simply put / replace _touchedPanelBoxState.put(clientId, state); } So that's the first part, we now have a record of every panelBox that the user has touched. So what do we do when the Collapse All or Expand All buttons are pressed? Here we do some JavaScript magic. Basically for each clientID that we have stored away, we issue a client side disclosure event from JavaScript - just as if the user had gone back and changed it manually. So here's the Collapse All button action: public String CloseAllAction() { submitDiscloseOverride(pbState.getTouchedClientIds(true), false); _uiManager.closeAllBoxes(); return null; }  The _uiManager.closeAllBoxes() method is just manipulating the master-state that all of the panelBoxes are bound to using EL. The interesting bit though is the line:  submitDiscloseOverride(pbState.getTouchedClientIds(true), false); To break that down, the first part is a call to that viewScoped state holder to ask for a list of clientIDs that need to be "tweaked": public String getTouchedClientIds(boolean targetState) { StringBuilder sb = new StringBuilder(); if (_touchedPanelBoxState != null && _touchedPanelBoxState.size() > 0) { for (Map.Entry<String, Boolean> entry : _touchedPanelBoxState.entrySet()) { if (entry.getValue() == targetState) { if (sb.length() > 0) { sb.append(','); } sb.append(entry.getKey()); } } } return sb.toString(); } You'll notice that this method only processes those panelBoxes that will be in the wrong state and returns those as a comma separated list. This is then processed by the submitDiscloseOverride() method: private void submitDiscloseOverride(String clientIdList, boolean targetDisclosureState) { if (clientIdList != null && clientIdList.length() > 0) { FacesContext fctx = FacesContext.getCurrentInstance(); StringBuilder script = new StringBuilder(); script.append("overrideDiscloseHandler('"); script.append(clientIdList); script.append("',"); script.append(targetDisclosureState); script.append(");"); Service.getRenderKitService(fctx, ExtendedRenderKitService.class).addScript(fctx, script.toString()); } } This method constructs a JavaScript command to call a routine called overrideDiscloseHandler() in a script attached to the page (using the standard <af:resource> tag). That method parses out the list of clientIDs and sends the correct message to each one: function overrideDiscloseHandler(clientIdList, newState) { AdfLogger.LOGGER.logMessage(AdfLogger.INFO, "Disclosure Hander newState " + newState + " Called with: " + clientIdList); //Parse out the list of clientIds var clientIdArray = clientIdList.split(','); for (var i = 0; i < clientIdArray.length; i++){ var panelBox = flipPanel = AdfPage.PAGE.findComponentByAbsoluteId(clientIdArray[i]); if (panelBox.getComponentType() == "oracle.adf.RichPanelBox"){ panelBox.broadcast(new AdfDisclosureEvent(panelBox, newState)); } }  }  So there you go. You can see how, with a few tweaks the same code could be used for other components with disclosure that might suffer from the same problem, although I'd point out that the behavior I'm working around here us usually desirable. You can download the running example (11.1.2.2) from here. 

  Read the article

• Clouds Everywhere But not a Drop of Rain – Part 3

  - by sxkumar

  I was sharing with you how a broad-based transformation such as cloud will increase agility and efficiency of an organization if process re-engineering is part of the plan.  I have also stressed on the key enterprise requirements such as “broad and deep solutions, “running your mission critical applications” and “automated and integrated set of capabilities”. Let me walk you through some key cloud attributes such as “elasticity” and “self-service” and what they mean for an enterprise class cloud. I will also talk about how we at Oracle have taken a very enterprise centric view to developing cloud solutions and how our products have been specifically engineered to address enterprise cloud needs. Cloud Elasticity and Enterprise Applications Requirements Easy and quick scalability for a short-period of time is the signature of cloud based solutions. It is this elasticity that allows you to dynamically redistribute your resources according to business priorities, helps increase your overall resource utilization, and reduces operational costs by allowing you to get the most out of your existing investment. Most public clouds are offering a instant provisioning mechanism of compute power (CPU, RAM, Disk), customer pay for the instance-hours(and bandwidth) they use, adding computing resources at peak times and removing them when they are no longer needed. This type of “just-in-time” serving of compute resources is well known for mid-tiers “state less” servers such as web application servers and web servers that just need another machine to start and run on it but what does it really mean for an enterprise application and its underlying data? Most enterprise applications are not as quite as “state less” and justifiably so. As such, how do you take advantage of cloud elasticity and make it relevant for your enterprise apps? This is where Cloud meets Grid Computing. At Oracle, we have invested enormous amount of time, energy and resources in creating enterprise grid solutions. All our technology products offer built-in elasticity via clustering and dynamic scaling. With products like Real Application Clusters (RAC), Automatic Storage Management, WebLogic Clustering, and Coherence In-Memory Grid, we allow all your enterprise applications to benefit from Cloud elasticity –both vertically and horizontally - without requiring any application changes. A number of technology vendors take a rather simplistic route of starting up additional or removing unneeded VM as the "Cloud Scale-Out" solution. While this may work for stateless mid-tier servers where load balancers can handle the addition and remove of instances transparently but following a similar approach for the database tier - often called as "database sharding" - requires significant application modification and typically does not work with off the shelf packaged applications. Technologies like Oracle Database Real Application Clusters, Automatic Storage Management, etc. on the other hand bring the benefits of incremental scalability and on-demand elasticity to ANY application by providing a simplified abstraction layers where the application does not need deal with data spread over multiple database instances. Rather they just talk to a single database and the database software takes care of aggregating resources across multiple hardware components. It is the technologies like these that truly make a cloud solution relevant for enterprises.  For customers who are looking for a next generation hardware consolidation platform, our engineered systems (e.g. Exadata, Exalogic) not only provide incredible amount of performance and capacity, they also reduce the data center complexity and simplify operations. Assemble, Deploy and Manage Enterprise Applications for Cloud Products like Oracle Virtual assembly builder (OVAB) resolve the complex problem of bringing the cloud speed to complex multi-tier applications. With assemblies, you can not only provision all components of a multi-tier application and wire them together by push of a button, other aspects of application lifecycle, such as real-time application testing, scale-up/scale-down, performance and availability monitoring, etc., are also automated using Oracle Enterprise Manager.  An essential criteria for an enterprise cloud to succeed is the ability to ensure business service levels especially when business users have either full visibility on the usage cost with a “show back” or a “charge back”. With Oracle Enterprise Manager 12c, we have created the most comprehensive cloud management solution in the industry that is capable of managing business service levels “applications-to-disk” in a enterprise private cloud – all from a single console. It is the only cloud management platform in the industry that allows you to deliver infrastructure, platform and application cloud services out of the box. Moreover, it offers integrated and complete lifecycle management of the cloud - including planning and set up, service delivery, operations management, metering and chargeback, etc .  Sounds unbelievable? Well, just watch this space for more details on how Oracle Enterprise Manager 12c is the nerve center of Oracle Cloud! Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies.  Summary  But the intent of this blog post isn't to dwell on how great our solutions are (these are just some examples to illustrate how we at Oracle have approached this problem space). Rather it is to help you ask the right questions before you embark on your cloud journey.  So to summarize, here are the key takeaways.       It is critical that you are clear on why you are building the cloud. Successful organizations keep business benefits as the first and foremost cloud objective. On the other hand, those who approach this purely as a technology project are more likely to fail. Think about where you want to be in 3-5 years before you get started. Your long terms objectives should determine what your first step ought to be. As obvious as it may seem, more people than not make the first move without knowing where they are headed.  Don’t make the mistake of equating cloud to virtualization and Infrastructure-as-a-Service (IaaS). Spinning a VM on-demand will give some short term relief to your IT staff but is unlikely to solve your larger business problems. As such, even if IaaS is your first step towards a more comprehensive cloud, plan the roadmap around those higher level services before you begin. And ask your vendors on how they are going to be your partners in this journey. Capabilities like self-service access and chargeback/showback are absolutely critical if you really expect your cloud to be transformational. Your business won't see the full benefits of the cloud until it empowers them with same kind of control and transparency that they are used to while using a public cloud service.  Evaluate the benefits of integration, as opposed to blindly following the best-of-breed strategy. Integration is a huge challenge and more so in a cloud environment. There are enormous costs associated with stitching a solution out of disparate components and even more in maintaining it. Hope you found these ideas helpful. Looking forward to hearing your thoughts and experiences.

  Read the article

• Notes on implementing Visual Studio 2010 Navigate To

  - by cyberycon

  One of the many neat functions added to Visual Studio in VS 2010 was the Navigate To feature. You can find it by clicking Edit, Navigate To, or by using the keyboard shortcut Ctrl, (yes, that's control plus the comma key). This pops up the Navigate To dialog that looks like this: As you type, Navigate To starts searching through a number of different search providers for your term. The entries in the list change as you type, with most providers doing some kind of fuzzy or at least substring matching. If you have C#, C++ or Visual Basic projects in your solution, all symbols defined in those projects are searched. There's also a file search provider, which displays all matching filenames from projects in the current solution as well. And, if you have a Visual Studio package of your own, you can implement a provider too. Micro Focus (where I work) provide the Visual COBOL language inside Visual Studio (http://visualstudiogallery.msdn.microsoft.com/ef9bc810-c133-4581-9429-b01420a9ea40 ), and we wanted to provide this functionality too. This post provides some notes on the things I discovered mainly through trial and error, but also with some kind help from devs inside Microsoft. The expectation of Navigate To is that it searches across the whole solution, not just the current project. So in our case, we wanted to search for all COBOL symbols inside all of our Visual COBOL projects inside the solution. So first of all, here's the Microsoft documentation on Navigate To: http://msdn.microsoft.com/en-us/library/ee844862.aspx . It's the reference information on the Microsoft.VisualStudio.Language.NavigateTo.Interfaces Namespace, and it lists all the interfaces you will need to implement to create your own Navigate To provider. Navigate To uses Visual Studio's latest mechanism for integrating external functionality and services, Managed Extensibility Framework (MEF). MEF components don't require any registration with COM or any other registry entries to be found by Visual Studio. Visual Studio looks in several well-known locations for manifest files (extension.vsixmanifest). It then uses reflection to scan for MEF attributes on classes in the assembly to determine which functionality the assembly provides. MEF itself is actually part of the .NET framework, and you can learn more about it here: http://mef.codeplex.com/. To get started with Visual Studio and MEF you could do worse than look at some of the editor examples on the VSX page http://archive.msdn.microsoft.com/vsx . I've also written a small application to help with switching between development and production MEF assemblies, which you can find on Codeproject: http://www.codeproject.com/KB/miscctrl/MEF_Switch.aspx. The Navigate To interfaces Back to Navigate To, and summarizing the MSDN reference documentation, you need to implement the following interfaces: INavigateToItemProviderFactoryThis is Visual Studio's entry point to your Navigate To implementation, and you must decorate your implementation with the following MEF export attribute: [Export(typeof(INavigateToItemProviderFactory))]  INavigateToItemProvider Your INavigateToItemProviderFactory needs to return your implementation of INavigateToItemProvider. This class implements StartSearch() and StopSearch(). StartSearch() is the guts of your provider, and we'll come back to it in a minute. This object also needs to implement IDisposeable(). INavigateToItemDisplayFactory Your INavigateToItemProvider hands back NavigateToItems to the NavigateTo framework. But to give you good control over what appears in the NavigateTo dialog box, these items will be handed back to your INavigateToItemDisplayFactory, which must create objects implementing INavigateToItemDisplay  INavigateToItemDisplay Each of these objects represents one result in the Navigate To dialog box. As well as providing the description and name of the item, this object also has a NavigateTo() method that should be capable of displaying the item in an editor when invoked. Carrying out the search The lifecycle of your INavigateToItemProvider is the same as that of the Navigate To dialog. This dialog is modal, which makes your implementation a little easier because you know that the user can't be changing things in editors and the IDE while this dialog is up. But the Navigate To dialog DOES NOT run on the main UI thread of the IDE – so you need to be aware of that if you want to interact with editors or other parts of the IDE UI. When the user invokes the Navigate To dialog, your INavigateToItemProvider gets sent a TryCreateNavigateToItemProvider() message. Instantiate your INavigateToItemProvider and hand this back. The sequence diagram below shows what happens next. Your INavigateToItemProvider will get called with StartSearch(), and passed an INavigateToCallback. StartSearch() is an asynchronous request – you must return from this method as soon as possible, and conduct your search on a separate thread. For each match to the search term, instantiate a NavigateToItem object and send it to INavigateToCallback.AddItem(). But as the user types in the Search Terms field, NavigateTo will invoke your StartSearch() method repeatedly with the changing search term. When you receive the next StartSearch() message, you have to abandon your current search, and start a new one. You can't rely on receiving a StopSearch() message every time. Finally, when the Navigate To dialog box is closed by the user, you will get a Dispose() message – that's your cue to abandon any uncompleted searches, and dispose any resources you might be using as part of your search. While you conduct your search invoke INavigateToCallback.ReportProgress() occasionally to provide feedback about how close you are to completing the search. There does not appear to be any particular requirement to how often you invoke ReportProgress(), and you report your progress as the ratio of two integers. In my implementation I report progress in terms of the number of symbols I've searched over the total number of symbols in my dictionary, and send a progress report every 16 symbols. Displaying the Results The Navigate to framework invokes INavigateToItemDisplayProvider.CreateItemDisplay() once for each result you passed to the INavigateToCallback. CreateItemDisplay() is passed the NavigateToItem you handed to the callback, and must return an INavigateToItemDisplay object. NavigateToItem is a sealed class which has a few properties, including the name of the symbol. It also has a Tag property, of type object. This enables you to stash away all the information you will need to create your INavigateToItemDisplay, which must implement an INavigateTo() method to display a symbol in an editor IDE when the user double-clicks an entry in the Navigate To dialog box. Since the tag is of type object, it is up to you, the implementor, to decide what kind of object you store in here, and how it enables the retrieval of other information which is not included in the NavigateToItem properties. Some of the INavigateToItemDisplay properties are self-explanatory, but a couple of them are less obvious: Additional informationThe string you return here is displayed inside brackets on the same line as the Name property. In English locales, Visual Studio includes the preposition "of". If you look at the first line in the Navigate To screenshot at the top of this article, Book_WebRole.Default is the additional information for textBookAuthor, and is the namespace qualified type name the symbol appears in. For procedural COBOL code we display the Program Id as the additional information DescriptionItemsYou can use this property to return any textual description you want about the item currently selected. You return a collection of DescriptionItem objects, each of which has a category and description collection of DescriptionRun objects. A DescriptionRun enables you to specify some text, and optional formatting, so you have some control over the appearance of the displayed text. The DescriptionItems property is displayed at the bottom of the Navigate To dialog box, with the Categories on the left and the Descriptions on the right. The Visual COBOL implementation uses it to display more information about the location of an item, making it easier for the user to know disambiguate duplicate names (something there can be a lot of in large COBOL applications). Summary I hope this article is useful for anyone implementing Navigate To. It is a fantastic navigation feature that Microsoft have added to Visual Studio, but at the moment there still don't seem to be any examples on how to implement it, and the reference information on MSDN is a little brief for anyone attempting an implementation.

  Read the article

• Different Not Automatically Implies Better

  - by Alois Kraus

  Originally posted on: http://geekswithblogs.net/akraus1/archive/2013/11/05/154556.aspxRecently I was digging deeper why some WCF hosted workflow application did consume quite a lot of memory although it did basically only load a xaml workflow. The first tool of choice is Process Explorer or even better Process Hacker (has more options and the best feature copy&paste does work). The three most important numbers of a process with regards to memory are Working Set, Private Working Set and Private Bytes. Working set is the currently consumed physical memory (parts can be shared between processes e.g. loaded dlls which are read only) Private Working Set is the physical memory needed by this process which is not shareable Private Bytes is the number of non shareable which is only visible in the current process (e.g. all new, malloc, VirtualAlloc calls do create private bytes) When you have a bigger workflow it can consume under 64 bit easily 500MB for a 1-2 MB xaml file. This does not look very scalable. Under 64 bit the issue is excessive private bytes consumption and not the managed heap. The picture is quite different for 32 bit which looks a bit strange but it seems that the hosted VB compiler is a lot less memory hungry under 32 bit. I did try to repro the issue with a medium sized xaml file (400KB) which does contain 1000 variables and 1000 if which can be represented by C# code like this: string Var1; string Var2; ... string Var1000; if (!String.IsNullOrEmpty(Var1) ) { Console.WriteLine(“Var1”); } if (!String.IsNullOrEmpty(Var2) ) { Console.WriteLine(“Var2”); } ....   Since WF is based on VB.NET expressions you are bound to the hosted VB.NET compiler which does result in (x64) 140 MB of private bytes which is ca. 140 KB for each if clause which is quite a lot if you think about the actually present functionality. But there is hope. .NET 4.5 does allow now C# expressions for WF which is a major step forward for all C# lovers. I did create some simple patcher to “cross compile” my xaml to C# expressions. Lets look at the result: C# Expressions VB Expressions x86 x86 On my home machine I have only 32 bit which gives you quite exactly half of the memory consumption under 64 bit. C# expressions are 10 times more memory hungry than VB.NET expressions! I wanted to do more with less memory but instead it did consume a magnitude more memory. That is surprising to say the least. The workflow does initialize in about the same time under x64 and x86 where the VB code does it in 2s whereas the C# version needs 18s. Also nearly ten times slower. That is a too high price to pay for any bigger sized xaml workflow to convert from VB.NET to C# expressions. If I do reduce the number of expressions to 500 then it does need 400MB which is about half of the memory. It seems that the cost per if does rise linear with the number of total expressions in a xaml workflow.  Expression Language Cost per IF Startup Time C# 1000 Ifs x64 1,5 MB 18s C# 500 Ifs x64 750 KB 9s VB 1000 Ifs x64 140 KB 2s VB 500 Ifs x64 70 KB 1s Now we can directly compare two MS implementations. It is clear that the VB.NET compiler uses the same underlying structure but it has much higher offset compared to the highly inefficient C# expression compiler. I have filed a connect bug here with a harsher wording about recent advances in memory consumption. The funniest thing is that one MS employee did give an Azure AppFabric demo around early 2011 which was so slow that he needed to investigate with xperf. He was after startup time and the call stacks with regards to VB.NET expression compilation were remarkably similar. In fact I only found this post by googling for parts of my call stacks. … “C# expressions will be coming soon to WF, and that will have different performance characteristics than VB” … What did he know Jan 2011 what I did no know until today? ;-). He knew that C# expression will come but that they will not be automatically have better footprint. It is about time to fix that. In its current state C# expressions are not usable for bigger workflows. That also explains the headline for today. You can cheat startup time by prestarting workflows so that the demo looks nice and snappy but it does hurt scalability a lot since you do need much more memory than necessary. I did find the stacks by enabling virtual allocation tracking within XPerf which is still the best tool out there. But first you need to look at your process to check where the memory is hiding: For the C# Expression compiler you do not need xperf. You can directly dump the managed heap and check with a profiler of your choice. But if the allocations are happening on the Private Data ( VirtualAlloc ) you can find it with xperf. There is a nice video on channel 9 explaining VirtualAlloc tracking it in greater detail. If your data allocations are on the Heap it does mean that the C/C++ runtime did create a heap for you where all malloc, new calls do allocate from it. You can enable heap tracing with xperf and full call stack support as well which is doable via xperf like it is shown also on channel 9. Or you can use WPRUI directly: To make “Heap Usage” it work you need to set for your executable the tracing flags (before you start it). For example devenv.exe HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\devenv.exe DWORD TracingFlags 1 Do not forget to disable it after you did complete profiling the process or it will impact the startup time quite a lot. You can with xperf attach directly to a running process and collect heap allocation information from a gone wild process. Very handy if you need to find out what a process was doing which has arrived in a funny state. “VirtualAlloc usage” does work without explicitly enabling stuff for a specific process and is always on machine wide. I had issues on my Windows 7 machines with the call stack collection and the latest Windows 8.1 Performance Toolkit. I was told that WPA from Windows 8.0 should work fine but I do not want to downgrade.

  Read the article

• Entity Framework 6: Alpha2 Now Available

  - by ScottGu

  The Entity Framework team recently announced the 2nd alpha release of EF6.   The alpha 2 package is available for download from NuGet. Since this is a pre-release package make sure to select “Include Prereleases” in the NuGet package manager, or execute the following from the package manager console to install it: PM> Install-Package EntityFramework -Pre This week’s alpha release includes a bunch of great improvements in the following areas: Async language support is now available for queries and updates when running on .NET 4.5. Custom conventions now provide the ability to override the default conventions that Code First uses for mapping types, properties, etc. to your database. Multi-tenant migrations allow the same database to be used by multiple contexts with full Code First Migrations support for independently evolving the model backing each context. Using Enumerable.Contains in a LINQ query is now handled much more efficiently by EF and the SQL Server provider resulting greatly improved performance. All features of EF6 (except async) are available on both .NET 4 and .NET 4.5. This includes support for enums and spatial types and the performance improvements that were previously only available when using .NET 4.5. Start-up time for many large models has been dramatically improved thanks to improved view generation performance. Below are some additional details about a few of the improvements above: Async Support .NET 4.5 introduced the Task-Based Asynchronous Pattern that uses the async and await keywords to help make writing asynchronous code easier. EF 6 now supports this pattern. This is great for ASP.NET applications as database calls made through EF can now be processed asynchronously – avoiding any blocking of worker threads. This can increase scalability on the server by allowing more requests to be processed while waiting for the database to respond. The following code shows an MVC controller that is querying a database for a list of location entities:     public class HomeController : Controller     {         LocationContext db = new LocationContext();           public async Task<ActionResult> Index()         {             var locations = await db.Locations.ToListAsync();               return View(locations);         }     } Notice above the call to the new ToListAsync method with the await keyword. When the web server reaches this code it initiates the database request, but rather than blocking while waiting for the results to come back, the thread that is processing the request returns to the thread pool, allowing ASP.NET to process another incoming request with the same thread. In other words, a thread is only consumed when there is actual processing work to do, allowing the web server to handle more concurrent requests with the same resources. A more detailed walkthrough covering async in EF is available with additional information and examples. Also a walkthrough is available showing how to use async in an ASP.NET MVC application. Custom Conventions When working with EF Code First, the default behavior is to map .NET classes to tables using a set of conventions baked into EF. For example, Code First will detect properties that end with “ID” and configure them automatically as primary keys. However, sometimes you cannot or do not want to follow those conventions and would rather provide your own. For example, maybe your primary key properties all end in “Key” instead of “Id”. Custom conventions allow the default conventions to be overridden or new conventions to be added so that Code First can map by convention using whatever rules make sense for your project. The following code demonstrates using custom conventions to set the precision of all decimals to 5. As with other Code First configuration, this code is placed in the OnModelCreating method which is overridden on your derived DbContext class:         protected override void OnModelCreating(DbModelBuilder modelBuilder)         {             modelBuilder.Properties<decimal>()                 .Configure(x => x.HasPrecision(5));           } But what if there are a couple of places where a decimal property should have a different precision? Just as with all the existing Code First conventions, this new convention can be overridden for a particular property simply by explicitly configuring that property using either the fluent API or a data annotation. A more detailed description of custom code first conventions is available here. Community Involvement I blogged a while ago about EF being released under an open source license.  Since then a number of community members have made contributions and these are included in EF6 alpha 2. Two examples of community contributions are: AlirezaHaghshenas contributed a change that increases the startup performance of EF for larger models by improving the performance of view generation. The change means that it is less often necessary to use of pre-generated views. UnaiZorrilla contributed the first community feature to EF: the ability to load all Code First configuration classes in an assembly with a single method call like the following: protected override void OnModelCreating(DbModelBuilder modelBuilder) {        modelBuilder.Configurations            .AddFromAssembly(typeof(LocationContext).Assembly); } This code will find and load all the classes that inherit from EntityTypeConfiguration<T> or ComplexTypeConfiguration<T> in the assembly where LocationContext is defined. This reduces the amount of coupling between the context and Code First configuration classes, and is also a very convenient shortcut for large models. Other upcoming features coming in EF 6 Lots of information about the development of EF6 can be found on the EF CodePlex site, including a roadmap showing the other features that are planned for EF6. One of of the nice upcoming features is connection resiliency, which will automate the process of retying database operations on transient failures common in cloud environments and with databases such as the Windows Azure SQL Database. Another often requested feature that will be included in EF6 is the ability to map stored procedures to query and update operations on entities when using Code First. Summary EF6 is the first open source release of Entity Framework being developed in CodePlex. The alpha 2 preview release of EF6 is now available on NuGet, and contains some really great features for you to try. The EF team are always looking for feedback from developers - especially on the new features such as custom Code First conventions and async support. To provide feedback you can post a comment on the EF6 alpha 2 announcement post, start a discussion or file a bug on the CodePlex site. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• SSIS - Range lookups

  - by Repieter

    When developing an ETL solution in SSIS we sometimes need to do range lookups in SSIS. Several solutions for this can be found on the internet, but now we have built another solution which I would like to share, since it's pretty easy to implement and the performance is fast.   You can download the sample package to see how it works. Make sure you have the AdventureWorks2008R2 and AdventureWorksDW2008R2 databases installed. (Apologies for the layout of this blog, I don't do this too often :))   To give a little bit more information about the example, this is basically what is does: we load a facttable and do an SCD type 2 lookup operation of the Product dimension. This is done with a script component.   First we query the Data warehouse to create the lookup dataset. The query that is used for that is:   SELECT     [ProductKey]     ,[ProductAlternateKey]     ,[StartDate]     ,ISNULL([EndDate], '9999-01-01') AS EndDate FROM [DimProduct]     The output of this query is stored in a DataTable:     string lookupQuery = @"                         SELECT                             [ProductKey]                             ,[ProductAlternateKey]                             ,[StartDate]                             ,ISNULL([EndDate], '9999-01-01') AS EndDate                         FROM [DimProduct]";           OleDbCommand oleDbCommand = new OleDbCommand(lookupQuery, _oleDbConnection);         OleDbDataAdapter adapter = new OleDbDataAdapter(oleDbCommand);           _dataTable = new DataTable();         adapter.Fill(_dataTable);     Now that the dimension data is stored in the DataTable we use the following method to do the actual lookup:   public int RangeLookup(string businessKey, DateTime lookupDate)     {         // set default return value (Unknown)         int result = -1;           DataRow[] filteredRows;         filteredRows = _dataTable.Select(string.Format("ProductAlternateKey = '{0}'", businessKey));           for (int i = 0; i < filteredRows.Length; i++)         {             // check if the lookupdate is found between the startdate and enddate of any of the records             if (lookupDate >= (DateTime)filteredRows[i][2] && lookupDate < (DateTime)filteredRows[i][3])             {                 result = (filteredRows[i][0] == null) ? -1 : (int)filteredRows[i][0];                 break;             }         }           filteredRows = null;           return result;     }       This method is executed for every row that passes the script component. This is implemented in the ProcessInputRow method   public override void Input0_ProcessInputRow(Input0Buffer Row)     {         // Perform the lookup operation on the current row and put the value in the Surrogate Key Attribute         Row.ProductKey = RangeLookup(Row.ProductNumber, Row.OrderDate);     }   Now what actually happens?!   1. Every record passes the business key and the orderdate to the RangeLookup method. 2. The DataTable is then filtered on the business key of the current record. The output is stored in a DataRow [] object. 3. We loop over the DataRow[] object to see where the orderdate meets the following expression: (lookupDate >= (DateTime)filteredRows[i][2] && lookupDate < (DateTime)filteredRows[i][3]) 4. When the expression returns true (so where the data is between the Startdate and the EndDate), the surrogate key of the dimension record is returned   We have done some testing with this solution and it works great for us. Hope others can use this example to do their range lookups.

  Read the article

• I'm a contract developer and I think I'm about to get screwed [closed]

  - by kagaku

  I do contract development on the side. You could say that I'm a contract developer? Considering I've only ever had one client I'd say that's not exactly the truth - more like I took a side job and needed some extra cash. It started out as a "rebuild our website and we'll pay you $10k" type project. Once that was complete (a bit over schedule, but certainly not over budget), the company hired me on as a "long term support" contractor. The contract is to go from March of this year, expiring on December 31st of this year - 10 months. Over which a payment is to be paid on the 30th of each month for a set amount. I've been fulfilling my end of the contract on all points - doing server maintenence, application and database changes, doing huge rush changes and pretty much just going above and beyond. Currently I'm in the middle of development of an iPhone mobile application (PhoneGap based) which is nearing completion (probably 3-4 weeks from submission). It has not been all peaches and flowers though. Each and every month when my paycheck comes due, there always seems to be an issue of sorts. These issues did not occur during the initial project, only during the support contract. The actual contract states that my check should be mailed out on the 30th of the month. I have received my check on time approximately once (on time being about 2-3 days within the 30th). I've received my paycheck as late as the 15th of the next month - over two weeks late. I've put up with it because I need the paycheck. There have been promises and promises of "we'll send it out on time next time! I promise" - only to receive it just as late the next month. When I ask about payment they give me a vibe like "why are you only worried about money?" - unfortunately I don't have the luxury of not worrying about money. The last straw was with my August payment, which should have been mailed on August 30th. I received it on September 12th. The reason for the delay? "USPS is delaying it man! we sent it out on the 1st!" is the reason I got. When I finally got the check in the mail, the postage on the envelope was marked September 10th - the date it was run through the postage machine. I've been outright lied to, at this point. I carry on working, because again - I need a paycheck. I orchestrated the move of our application to a new server, developed a bunch of new changes and continued work on the iPhone app. All told I probably went over my hourly allotment (I'm paid for 40 hours a month, I probably put in at least 50). On Saturday, the 1st, I gave the main contact at the company (a company of 3, by the way - this is not some big corporation) a ring and filled him in on the status of my work for the past two weeks. Unusually I hadn't heard from him since the middle of September. His response was "oh... well, that is nice and uh.. good job. well, we've been talking within the company about things and we've certainly got some decisions ahead of us..." - not verbatim but you get the idea (I hope?). I got out of this conversation that the site is not doing very well (which it's not) and they're considering pulling the plug. Crap, this contract is going to end early - there goes Christmas! Fine, that's alright, no problem. I'll get paid for the last months work and call it a day. Unfortunately I still haven't gotten last months check, and I'm getting dicked around now. "Oh.. we had problems transferring funds, we'll try and mail it out tomorrow" and "I left a VM with the finance guy, but I can't get ahold of him". So I'm getting the feeling I'm not getting paid for all the work I put in for September. This is obviously breach of contract, and I am pissed. Thinking irrationally, I considered changing all their passwords and holding their stuff hostage. Before I think it through (by the way, I am NOT going to do this, realized it would probably get me in trouble), I go and try some passwords for our various accounts. Google Apps? Oh, I'm no longer administrator here. Godaddy? Whoops, invalid password. Disqus? Nope, invalid password here too. Google Adsense / Analytics? Invalid password. Dedicated server account manager? Invalid password. Now, I have the servers root password - I just built the box last week and haven't had a chance to send the guy the root password. Wasn't in a rush, I manage the server and they never touch it. Now all of a sudden all the passwords except this one are changed; the writing is on the wall - I am out. Here's the conundrum. I have the root password, they do not. If I give them this password all the leverage I have is gone, out the door and out of my hands. During this argument of why am I not getting paid the guy sends me an email saying "oh by the way, what's the root username and password to the server?". Considering he knows absolutely nothing, I gave him an "admin" account which really has almost no rights. I still have exclusive access to the server, I just don't know where to go. I can hold their data hostage, but I'm almost positive this is the wrong thing to do. I'd consider it blackmail, regardless of whether or not I have gotten paid yet. I can "break" something on the server and give them the whole "well, if you were paying me I could fix it!" spiel. This works from a "well he's not holding their stuff hostage" point of view, but what stops them from hiring some one else to just fix the issue at hand? For all I know the guys nephew is a "l33t hax0r" and can figure it out for free. I can give in, document as much as I can and take him to small claims court. This is breach of contract, I'm not getting paid. I have a case, right? ???? Does anyone have any experience in this? What can I do? What are my options? I'm broke, I can't afford a lawyer and I can barely afford not getting this paycheck. My wife doesn't work (I work two jobs so she doesn't have to work - we have a 1 year old) and is already looking at getting a part time job to cover the bills. Long term we'll be fine, but this has pissed me off beyond belief! Help me out, I'm about to get screwed.

  Read the article

• Building an ASP.Net 4.5 Web forms application - part 5

  - by nikolaosk

  ?his is the fifth post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line. There are 4 more posts in this series of posts.Please make sure you read them first.You can find the first post here. You can find the second post here. You can find the third post here.You can find the fourth here.  In this new post we will build on the previous posts and we will demonstrate how to display the details of a poster when the user clicks on an individual poster photo/link. We will add a FormView control on a web form and will bind data from the database. FormView is a great web server control for displaying the details of a single record. 1) Launch Visual Studio and open your solution where your project lives2) Add a new web form item on the project.Make sure you include the Master Page.Name it PosterDetails.aspx 3) Open the PosterDetails.aspx page. We will add some markup in this page. Have a look at the code below <asp:Content ID="Content2" ContentPlaceHolderID="FeaturedContent" runat="server">    <asp:FormView ID="posterDetails" runat="server" ItemType="PostersOnLine.DAL.Poster" SelectMethod ="GetPosterDetails">        <ItemTemplate>            <div>                <h1><%#:Item.PosterName %></h1>            </div>            <br />            <table>                <tr>                    <td>                        <img src="<%#:Item.PosterImgpath %>" border="1" alt="<%#:Item.PosterName %>" height="300" />                    </td>                    <td style="vertical-align: top">                        <b>Description:</b><br /><%#:Item.PosterDescription %>                        <br />                        <span><b>Price:</b>&nbsp;<%#: String.Format("{0:c}", Item.PosterPrice) %></span>                        <br />                        <span><b>Poster Number:</b>&nbsp;<%#:Item.PosterID %></span>                        <br />                    </td>                </tr>            </table>        </ItemTemplate>    </asp:FormView></asp:Content> I set the ItemType property to the Poster entity class and the SelectMethod to the GetPosterDetails method.The Item binding expression is available and we can retrieve properties of the Poster object.I retrieve the name, the image,the description and the price of each poster. 4) Now we need to write the GetPosterDetails method.In the code behind of the PosterDetails.aspx page we type public IQueryable<Poster> GetPosterDetails([QueryString("PosterID")]int? posterid)        {                    PosterContext ctx = new PosterContext();            IQueryable<Poster> query = ctx.Posters;            if (posterid.HasValue && posterid > 0)            {                query = query.Where(p => p.PosterID == posterid);            }            else            {                query = null;            }            return query;        } I bind the value from the query string to the posterid parameter at run time.This is all possible due to the QueryStringAttribute class that lives inside the System.Web.ModelBinding and gets the value of the query string variable PosterID.If there is a matching poster it is fetched from the database.If not,there is no data at all coming back from the database. 5) I run my application and then click on the "Midfielders" link.Then click on the first poster that appears from the left (Kenny Dalglish) and click on it to see the details. Have a look at the picture below to see the results.   You can see that now I have all the details of the poster in a new page.?ake sure you place breakpoints in the code so you can see what is really going on. Hope it helps!!!

  Read the article

• Part 3 of 4 : Tips/Tricks for Silverlight Developers.

  - by mbcrump

  Part 1 | Part 2 | Part 3 | Part 4 I wanted to create a series of blog post that gets right to the point and is aimed specifically at Silverlight Developers. The most important things I want this series to answer is : What is it?  Why do I care? How do I do it? I hope that you enjoy this series. Let’s get started: Tip/Trick #11) What is it? Underline Text in a TextBlock. Why do I care? I’ve seen people do some crazy things to get underlined text in a Silverlight Application. In case you didn’t know there is a property for that. How do I do it: On a TextBlock you have a property called TextDecorations. You can easily set this property in XAML or CodeBehind with the following snippet: <UserControl x:Class="SilverlightApplication19.MainPage" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <TextBlock Name="txtTB" Text="MichaelCrump.NET" TextDecorations="Underline" /> </Grid> </UserControl> or you can do it in CodeBehind… txtTB.TextDecorations = TextDecorations.Underline;   Tip/Trick #12) What is it? Get the browser information from a Silverlight Application. Why do I care? This will allow you to program around certain browser conditions that otherwise may not be aware of. How do I do it: It is very easy to extract Browser Information out a Silverlight Application by using the BrowserInformation class. You can copy/paste this code snippet to have access to all of them. string strBrowserName = HtmlPage.BrowserInformation.Name; string strBrowserMinorVersion = HtmlPage.BrowserInformation.BrowserVersion.Minor.ToString(); string strIsCookiesEnabled = HtmlPage.BrowserInformation.CookiesEnabled.ToString(); string strPlatform = HtmlPage.BrowserInformation.Platform; string strProductName = HtmlPage.BrowserInformation.ProductName; string strProductVersion = HtmlPage.BrowserInformation.ProductVersion; string strUserAgent = HtmlPage.BrowserInformation.UserAgent; string strBrowserVersion = HtmlPage.BrowserInformation.BrowserVersion.ToString(); string strBrowserMajorVersion = HtmlPage.BrowserInformation.BrowserVersion.Major.ToString(); Tip/Trick #13) What is it? Always check the minRuntimeVersion after creating a new Silverlight Application. Why do I care? Whenever you create a new Silverlight Application and host it inside of an ASP.net website you will notice Visual Studio generates some code for you as shown below. The minRuntimeVersion value is set by the SDK installed on your system. Be careful, if you are playing with beta’s like “Lightswitch” because you will have a higher version of the SDK installed. So when you create a new Silverlight 4 project and deploy it your customers they will get a prompt telling them they need to upgrade Silverlight. They also will not be able to upgrade to your version because its not released to the public yet. How do I do it: Open up the .aspx or .html file Visual Studio generated and look for the line below. Make sure it matches whatever version you are actually targeting. Tip/Trick #14) What is it? The VisualTreeHelper class provides useful methods for involving nodes in a visual tree. Why do I care? It’s nice to have the ability to “walk” a visual tree or to get the rendered elements of a ListBox. I have it very useful for debugging my Silverlight application. How do I do it: Many examples exist on the web, but say that you have a huge Silverlight application and want to find the parent object of a control.  In the code snippet below, we would get 3 MessageBoxes with (StackPanel first, Grid second and UserControl Third). This is a tiny application, but imagine how helpful this would be on a large project. <UserControl x:Class="SilverlightApplication18.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="400"> <Grid x:Name="LayoutRoot" Background="White"> <StackPanel> <Button Content="Button" Height="23" Name="button1" VerticalAlignment="Top" Width="75" Click="button1_Click" /> </StackPanel> </Grid> </UserControl> private void button1_Click(object sender, RoutedEventArgs e) { DependencyObject obj = button1; while ((obj = VisualTreeHelper.GetParent(obj)) != null) { MessageBox.Show(obj.GetType().ToString()); } } Tip/Trick #15) What is it? Add ChildWindows to your Silverlight Application. Why do I care? ChildWindows are a great way to direct a user attention to a particular part of your application. This could be used when saving or entering data. How do I do it: Right click your Silverlight Application and click Add then New Item. Select Silverlight Child Window as shown below. Add an event and call the ChildWindow with the following snippet below: private void button1_Click(object sender, RoutedEventArgs e) { ChildWindow1 cw = new ChildWindow1(); cw.Show(); } Your main application can still process information but this screen forces the user to select an action before proceeding. The code behind of the ChildWindow will look like the following: namespace SilverlightApplication18 { public partial class ChildWindow1 : ChildWindow { public ChildWindow1() { InitializeComponent(); } private void OKButton_Click(object sender, RoutedEventArgs e) { this.DialogResult = true; //TODO: Add logic to save what the user entered. } private void CancelButton_Click(object sender, RoutedEventArgs e) { this.DialogResult = false; } } } Thanks for reading and please come back for Part 4.  Subscribe to my feed CodeProject

  Read the article

• Who could ask for more with LESS CSS? (Part 2 of 3&ndash;Setup)

  - by ToStringTheory

  Welcome to part two in my series covering the LESS CSS language.  In the first post, I covered the two major CSS precompiled languages - LESS and SASS to a small extent, iterating over some of the features that you could expect to find in them.  In this post, I will go a little further in depth into the setup and execution of using the LESS framework. Introduction It really doesn’t take too much to get LESS working in your project.  The basic workflow will be including the necessary translator in your project, defining bundles for the LESS files, add the necessary code to your layouts.cshtml file, and finally add in all your necessary styles to the LESS files!  Lets get started… New Project Just like all great experiments in Visual Studio, start up a File > New Project, and create a new MVC 4 Web Application.  The Base Package After you have the new project spun up, use the Nuget Package Manager to install the Bundle Transformer: LESS package. This will take care of installing the main translator that we will be using for LESS code (dotless which is another Nuget package), as well as the core framework for the Bundle Transformer library.  The installation will come up with some instructions in a readme file on how to modify your web.config to handle all your *.less requests through the Bundle Transformer, which passes the translating onto dotless. Where To Put These LESS Files?! This step isn’t really a requirement, however I find that I don’t like how ASP.Net MVC just has a content directory where they store CSS, content images, css images….  In my project, I went ahead and created a new directory just for styles – LESS files, CSS files, and images that are only referenced in LESS or CSS.  Ignore the MVC directory as this was my testbed for another project I was working on at the same time.  As you can see here, I have: A top level directory for images which contains only images used in a page A top level directory for scripts A top level directory for Styles A few directories for plugins I am using (Colrizr, JQueryUI, Farbtastic) Multiple *.less files for different functions (I’ll go over these in a minute) I find that this layout offers the best separation of content types.  Bring Out Your Bundles! The next thing that we need to do is add in the necessary code for the bundling of these LESS files.  Go ahead and open your BundleConfig.cs file, usually located in the /App_Start/ folder of the project.  As you will see in a minute, instead of using the method Microsoft does in the base MVC 4 project, I change things up a bit.  Define Constants The first thing I do is define constants for each of the virtual paths that will be used in the bundler: The main reason is that I hate magic strings in my program, so the fact that you first defined a virtual path in the BundleConfig file, and then used that path in the _Layout.cshtml file really irked me. Add Bundles to the BundleCollection Next, I am going to define the bundles for my styles in my AddStyleBundles method: That is all it takes to get all of my styles in play with LESS.  The CssTransformer and NullOrderer types come from the Bundle Transformer we grabbed earlier.  If we didn’t use that package, we would have to write our own function (not too hard, but why do it if it’s been done). I use the site.less file as my main hub for LESS - I will cover that more in the next section. Add Bundles To Layout.cshtml File With the constants in the BundleConfig file, instead of having to use the same magic string I defined for the bundle virtual path, I am able to do this: Notice here that besides the RenderSection magic strings (something I am working on in another side project), all of the bundles are now based on const strings.  If I need to change the virtual path, I only have to do it in one place.  Nifty! Get Started! We are now ready to roll!  As I said in the previous section, I use the site.less file as a central hub for my styles: As seen here, I have a reset.css file which is a simple CSS reset.  Next, I have created a file for managing all my color variables – colors.less: Here, you can see some of the standards I started to use, in this case for color variables.  I define all color variables with the @col prefix.  Currently, I am going for verbose variable names. The next file imported is my font.less file that defines the typeface information for the site: Simple enough.  A couple of imports for fonts from Google, and then declaring variables for use throughout LESS.  I also set up the heading sizes, margins, etc..  You can also see my current standardization for font declaration strings – @font. Next, I pull in a mixins.less file that I grabbed from the Twitter Bootstrap library that gives some useful parameterized mixins for use such as border-radius, gradient, box-shadow, etc… The common.less file is a file that just contains items that I will be defining that can be used across all my LESS files.  Kind of like my own mixins or font-helpers: Finally I have my layout.less file that contains all of my definitions for general site layout – width, main/sidebar widths, footer layout, etc: That’s it!  For the rest of my one off definitions/corrections, I am currently putting them into the site.less file beneath my original imports Note Probably my favorite side effect of using the LESS handler/translator while bundling is that it also does a CSS checkup when rendering…  See, when your web.config is set to debug, bundling will output the url to the direct less file, not the bundle, and the http handler intercepts the call, compiles the less, and returns the result.  If there is an error in your LESS code, the CSS file can be returned empty, or may have the error output as a comment on the first couple lines. If you have the web.config set to not debug, then if there is an error in your code, you will end up with the usual ASP.Net exception page (unless you catch the exception of course), with information regarding the failure of the conversion, such as brace mismatch, undefined variable, etc…  I find it nifty. Conclusion This is really just the beginning.  LESS is very powerful and exciting!  My next post will show an actual working example of why LESS is so powerful with its functions and variables…  At least I hope it will!  As for now, if you have any questions, comments, or suggestions on my current practice, I would love to hear them!  Feel free to drop a comment or shoot me an email using the contact page.  In the mean time, I plan on posting the final post in this series tomorrow or the day after, with my side project, as well as a whole base ASP.Net MVC4 templated project with LESS added in it so that you can check out the layout I have in this post.  Until next time…

  Read the article

• A Simple Collapsible Menu with jQuery

  - by Vincent Maverick Durano

  In this post I'll demonstrate how to make a simple collapsible menu using jQuery. To get started let's go ahead and fire up Visual Studio and create a new WebForm.  Now let's build our menu by adding some div, p and anchor tags. Since I'm using a masterpage then the ASPX mark-up should look something like this:   1: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 2: <div id="Menu"> 3: <p>CARS</p> 4: <div class="section"> 5: <a href="#">Car 1</a> 6: <a href="#">Car 2</a> 7: <a href="#">Car 3</a> 8: <a href="#">Car 4</a> 9: </div> 10: <p>BIKES</p> 11: <div class="section"> 12: <a href="#">Bike 1</a> 13: <a href="#">Bike 2</a> 14: <a href="#">Bike 3</a> 15: <a href="#">Bike 4</a> 16: <a href="#">Bike 5</a> 17: <a href="#">Bike 6</a> 18: <a href="#">Bike 7</a> 19: <a href="#">Bike 8</a> 20: </div> 21: <p>COMPUTERS</p> 22: <div class="section"> 23: <a href="#">Computer 1</a> 24: <a href="#">Computer 2</a> 25: <a href="#">Computer 3</a> 26: <a href="#">Computer 4</a> 27: </div> 28: <p>OTHERS</p> 29: <div class="section"> 30: <a href="#">Other 1</a> 31: <a href="#">Other 2</a> 32: <a href="#">Other 3</a> 33: <a href="#">Other 4</a> 34: </div> 35: </div> 36: </asp:Content>   As you can see there's nothing fancy about the mark up above.. Now lets go ahead create a simple CSS to set the look and feel our our Menu. Just for for the simplicity of this demo, add the following CSS below under the <head> section of the page or if you are using master page then add it a the content head. Here's the CSS below:   1: <asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server"> 2: <style type="text/css"> 3: #Menu{ 4: width:300px; 5: } 6: #Menu > p{ 7: background-color:#104D9E; 8: color:#F5F7FA; 9: margin:0; 10: padding:0; 11: border-bottom-style: solid; 12: border-bottom-width: medium; 13: border-bottom-color:#000000; 14: cursor:pointer; 15: } 16: #Menu .section{ 17: padding-left:5px; 18: background-color:#C0D9FA; 19: } 20: a{ 21: display:block; 22: color:#0A0A07; 23: } 24: </style> 25: </asp:Content>   Now let's add the collapsible effects on our menu using jQuery. To start using jQuery then register the following script at the very top of the <head> section of the page or if you are using master page then add it the very top of  the content head section.   <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js" ></script>   As you can see I'm using Google AJAX API CDN to host the jQuery file. You can also download the jQuery here and host it in your server if you'd like. Okay here's the the jQuery script below for adding the collapsible effects:   1: <script type="text/javascript"> 2: $(function () { 3: $("a").mouseover(function () { $(this).addClass("highlightRow"); }) 4: .mouseout(function () { $(this).removeClass("highlightRow"); }); 5:   6: $(".section").hide(); 7: $("#Menu > p").click(function () { 8: $(this).next().slideToggle("Slow"); 9: }); 10: }); 11: </script>   Okay to give you a little bit of explaination, at line 3.. what it does is it looks for all the "<a>" anchor elements on the page and attach the mouseover and mouseout event. On mouseover, the highlightRow css class is added to <a> element and on mouse out we remove the css class to revert the style to its default look. at line 6 we will hide all the elements that has a class name set as "section" and if you look at the mark up above it is refering to the <div> elements right after each <p> element. At line 7.. what it does is it looks for a <p> element that is a direct child of the element that has an ID of "Menu" and then attach the click event to toggle the visibilty of the section. Here's how it looks in the page: On Initial Load: After Clicking the Section Header:   That's it! I hope someone find this post usefu!   Technorati Tags: ASP.NET,JQuery,Master Page,JavaScript

  Read the article

• Building an ASP.Net 4.5 Web forms application - part 3

  - by nikolaosk

  ?his is the third post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line.Make sure you read the first and second post in the series.In this new post I will keep making some minor changes in the Markup,CSS and Master page but there is no point in presenting them here. They are just minor changes to reflect the content and layout I want my site to have. What I need to do now is to add some more pages and start displaying properly data from my database.Having said that I will show you how to add more pages to the web application and present data.1) Launch Visual Studio and open your solution where your project lives2) Add a new web form item on the project.Make sure you include the Master Page.Name it PosterList.aspxHave a look at the picture below 3) In Site.Master add the following link to the master page so the user can navigate to it.You should only add the line in bold     <nav>                    <ul id="menu">                        <li><a runat="server" href="~/">Home</a></li>                        <li><a runat="server" href="~/About.aspx">About</a></li>                        <li><a runat="server" href="~/Contact.aspx">Contact</a></li>                          <li><a href="http://weblogs.asp.net/PosterList.aspx">Posters</a></li>                    </ul>                </nav> 4) Now we need to display categories from the database. We will use a ListView web server control.Inside the <div id="body"> add the following code. <section id="postercat">       <asp:ListView ID="categoryList"                          ItemType="PostersOnLine.DAL.PosterCategory"                         runat="server"                        SelectMethod="GetPosterCategories" >                        <ItemTemplate>                                                    <a href="http://weblogs.asp.net/PosterList.aspx?id=<%#: Item.PosterCategoryID %>">                            <%#: Item.PosterCategoryName %>                            </a>                            </b>                        </ItemTemplate>                        <ItemSeparatorTemplate> ----- </ItemSeparatorTemplate>                    </asp:ListView>             </section>        Let me explain what the code does.We have the ListView control that displays each poster category's name.It also includes a link to the PosterList.aspx page with a query-string value containing the ID of the category. We set the ItemType property in the ListView to the PosterCategory entity .We set the SelectMethod property to a method GetPosterCategories. Now we can use the data-binding expression Item (<%#: %>) that is available within the ItemTemplate . 5) Now we must write the GetPosterCategories method. In the Site.Master.cs file add the following code.This is just a simple function that returns the poster categories.        public IQueryable<PosterCategory> GetPosterCategories()        {            PosterContext ctx = new PosterContext();            IQueryable<PosterCategory> query = ctx.PosterCategories;            return query;        } 6) I just changed a few things in the Site.css file to style the new <section> HTML element that includes the ListView control.#postercat {  text-align: center; background-color: #85C465;}     7) Build and run your application. Everything should compile now. Have a look at the picture below.The links (poster categories) appear.?he ListView control when is called during the page lifecycle calls the GetPosterCategories() method.The method is executed and returns the poster categories that are bound to the control.  When I click on any of the poster category links, the PosterList.aspx page will show up with the appropriate Id that is the PosterCategoryID.Have a look at the picture below  We will add more data-enabled controls in the next post in the PosterList.aspx page. Some people are complaining the posts are too long so I will keep them short. Hope it helps!!!

  Read the article

• How to set up spf records to send mail from google hosted apps to gmail addresses

  - by Chris Adams

  Hi there, I'm trying to work out why email I send from one domain I own is rejected by another that I own, and while I think it may be related to how I've setup spf records, I'm not sure what steps I need to take to fix it. Here's the error message I receive: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550-Verification failed for <[email protected]> 550-No Such User Here 550 Sender verify failed (state 14). Here's the response from [email protected] Delivered-To: [email protected] Received: by 10.86.92.9 with SMTP id p9cs85371fgb; Wed, 2 Sep 2009 22:33:32 -0700 (PDT) Received: by 10.90.205.4 with SMTP id c4mr2406190agg.29.1251956007562; Wed, 02 Sep 2009 22:33:27 -0700 (PDT) Return-Path: <[email protected]> Received: from verifier.port25.com (207-36-201-235.ptr.primarydns.com [207.36.201.235]) by mx.google.com with ESMTP id 26si831174aga.24.2009.09.02.22.33.25; Wed, 02 Sep 2009 22:33:26 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 207.36.201.235 as permitted sender) client-ip=207.36.201.235; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 207.36.201.235 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha1; c=relaxed/relaxed; s=auth; d=port25.com; h=Date:From:To:Subject:Message-Id:In-Reply-To; [email protected]; bh=GRMrcnoucTl4upzqJYTG5sOZMLU=; b=uk6TjADEyZVRkceQGjH94ZzfVeRTsiZPzbXuhlqDt1m+kh1zmdUEoiTOzd89ryCHMbVcnG1JajBj 5vOMKYtA3g== DomainKey-Signature: a=rsa-sha1; c=nofws; q=dns; s=auth; d=port25.com; b=NqKCPK00Xt49lbeO009xy4ZRgMGpghvcgfhjNy7+qI89XKTzi6IUW0hYqCQyHkd2p5a1Zjez2ZMC l0u9CpZD3Q==; Received: from verifier.port25.com (127.0.0.1) by verifier.port25.com (PowerMTA(TM) v3.6a1) id hjt9pq0hse8u for <[email protected]>; Thu, 3 Sep 2009 01:26:52 -0400 (envelope-from <[email protected]>) Date: Thu, 3 Sep 2009 01:26:52 -0400 From: [email protected] To: [email protected] Subject: Authentication Report Message-Id: <[email protected]> Precedence: junk (auto_reply) In-Reply-To: <[email protected]> This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community. While it is not officially supported, we welcome any feedback you may have at <[email protected]>. Thank you for using the verifier, The Port25 Solutions, Inc. team ========================================================== Summary of Results ========================================================== SPF check: pass DomainKeys check: neutral DKIM check: neutral Sender-ID check: pass SpamAssassin check: ham ========================================================== Details: ========================================================== HELO hostname: fg-out-1718.google.com Source IP: 72.14.220.158 mail-from: [email protected] ---------------------------------------------------------- SPF check details: ---------------------------------------------------------- Result: pass ID(s) verified: [email protected] DNS record(s): stemcel.co.uk. 14400 IN TXT "v=spf1 include:aspmx.googlemail.com ~all" aspmx.googlemail.com. 7200 IN TXT "v=spf1 redirect=_spf.google.com" _spf.google.com. 300 IN TXT "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ?all" ---------------------------------------------------------- DomainKeys check details: ---------------------------------------------------------- Result: neutral (message not signed) ID(s) verified: [email protected] DNS record(s): ---------------------------------------------------------- DKIM check details: ---------------------------------------------------------- Result: neutral (message not signed) ID(s) verified: NOTE: DKIM checking has been performed based on the latest DKIM specs (RFC 4871 or draft-ietf-dkim-base-10) and verification may fail for older versions. If you are using Port25's PowerMTA, you need to use version 3.2r11 or later to get a compatible version of DKIM. ---------------------------------------------------------- Sender-ID check details: ---------------------------------------------------------- Result: pass ID(s) verified: [email protected] DNS record(s): stemcel.co.uk. 14400 IN TXT "v=spf1 include:aspmx.googlemail.com ~all" aspmx.googlemail.com. 7200 IN TXT "v=spf1 redirect=_spf.google.com" _spf.google.com. 300 IN TXT "v=spf1 ip4:216.239.32.0/19 ip4:64.233.160.0/19 ip4:66.249.80.0/20 ip4:72.14.192.0/18 ip4:209.85.128.0/17 ip4:66.102.0.0/20 ip4:74.125.0.0/16 ip4:64.18.0.0/20 ip4:207.126.144.0/20 ?all" ---------------------------------------------------------- SpamAssassin check details: ---------------------------------------------------------- SpamAssassin v3.2.5 (2008-06-10) Result: ham (-2.6 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_PASS SPF: sender matches SPF record -2.6 BAYES_00 BODY: Bayesian spam probability is 0 to 1% [score: 0.0000] 0.0 HTML_MESSAGE BODY: HTML included in message I've registered the spf records for my domain, as advised here Both domains pass validate according to Kitterman's spf record testing tools, so I'm somewhat confused about this. I also have the catchall address set up on the stemcel.co.uk domain here, but I don't have one setup for chrisadams.me.uk. Instead, we have the following forwarders setup [email protected] to [email protected] [email protected] to [email protected] [email protected] to [email protected] [email protected] to [email protected] Any ideas how to get this working? I'm not sure what I should be looking for here.

  Read the article

• PHP pages working slow from time to time

  - by user1038179

  I have VPS with limit of 2GB of ram and 8 CPU cores. I have 5 sites on that VPS (one of them is just for testing, no visitors exept me). All 5 sites are image galleries, like wallpaper sites. Last week I noticed problem on one site (main domain, used for name servers, and also with most traffic, visitors). That site has two image galleries, one is old static html gallery made few years ago and another, main, is powered by ZENPhoto CMS. Also I have that same gallery CMS on another two sites on that same VPS (on one running site and on one just for testing site). On other two sites I have diferent PHP driven gallery. Problem is that after some time (it vary from 10 minutes to few hours after apache restart), loading of pages on main site becomes very slow, or I get 503 Service Temporarily Unavailable error. So pages becomes unavailable. But just that part with new CMS gallery, old part of site with static html pages are working fast and just fine. Also other two sites with same CMS gallery and other two with different PHP driven gallery are working fine and fast at the same time. I thought it must be something with CMS on that main site, because other sites are working nice. Then I tryed to open contact and guest book pages on that main site which are outside of that CMS but also PHP pages, and they do not load too, but that same contact php scipts are working on other sites at the same time. So, when site starts to hangs, ONLY PHP generated content is not working, like I said other static pages are working. And, ONLY on that one main site I have problems. Then I need to restart Apache, after restart everything is vorking nice and fast, for some time, than again, just PHP pages on main site are becomming slower. If I do not restart apache that slowness take some time (several minutes, hours, depending ot traffic) and during that time PHP diven content is loading very slow or unavailable on that site. After sime time, on moments everything start to work and is fast again for some time, and again. In hours with more traffic PHP content is loading slowly or it is unavailable, in hours with less traffic it is sometimes fast and sometimes little bit slower than usually. And ones again, only on that main site, and only PHP driven pages, static pages are working fast even in most traffic hours also other sites with even same CMS are working fast. Currently I have about 7000 unique visitors on that site but site worked nice even with 11500 visitors per day. And about 17000 in total visitors on VPS, all sites ( about 3 pages per unique visitor). When site start to slow down sometimes in apache status I can see something like this: mod_fcgid status: Total FastCGI processes: 37 Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 11300 39 28 7 Working 11274 47 28 7 Working 11296 40 29 3 Working 11283 45 30 3 Working 11304 36 31 1 Working 11282 46 32 3 Working 11292 42 33 1 Working 11289 44 34 1 Working 11305 35 35 0 Working 11273 48 36 2 Working 11280 47 39 1 Working 10125 133 40 12 Exiting(communication error) 11294 41 41 1 Exiting(communication error) 11277 47 42 2 Exiting(communication error) 11291 43 43 1 Exiting(communication error) 10187 108 43 10 Exiting(communication error) 10209 95 44 7 Exiting(communication error) 10171 113 44 5 Exiting(communication error) 11275 47 47 1 Exiting(communication error) 10144 125 48 8 Exiting(communication error) 10086 149 48 20 Exiting(communication error) 10212 94 49 5 Exiting(communication error) 10158 118 49 5 Exiting(communication error) 10169 114 50 4 Exiting(communication error) 10105 141 50 16 Exiting(communication error) 10094 146 50 15 Exiting(communication error) 10115 139 51 17 Exiting(communication error) 10213 93 51 9 Exiting(communication error) 10197 103 51 7 Exiting(communication error) Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7983 1079 2 149 Ready 7979 1079 11 151 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7990 1066 0 57 Ready 8001 1031 64 35 Ready 7999 1032 94 29 Ready 8000 1031 91 36 Ready 8002 1029 34 52 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7991 1064 29 115 Ready When it is working nicly there is no lines with "Exiting(communication error)" Active and Idle are time active and time since last request, in seconds. Here are system info. Sysem info: Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5440 @ 2.83GHz Speed 88.320 MHz Cache 6144 KB All other seven are the same. System Information Linux vps.nnnnnnnnnnnnnnnnn.nnn 2.6.18-028stab099.3 #1 SMP Wed Mar 7 15:20:22 MSK 2012 x86_64 x86_64 x86_64 GNU/Linux Current Memory Usage total used free shared buffers cached Mem: 8388608 882164 7506444 0 0 0 -/+ buffers/cache: 882164 7506444 Swap: 0 0 0 Total: 8388608 882164 7506444 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/vzfs 100G 34G 67G 34% / none System Details: Running on: Apache/2.2.22 System info: (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 DAV/2 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_fcgid/2.3.6 Powered by: PHP/5.3.10 Current Configuration Default PHP Version (.php files) 5 PHP 5 Handler fcgi PHP 4 Handler suphp Apache suEXEC on Apache Ruid2 off PHP 4 Handler suphp Apache suEXEC on Apache Configuration The following settings have been saved: fileetag: All keepalive: On keepalivetimeout: 3 maxclients: 150 maxkeepaliverequests: 10 maxrequestsperchild: 10000 maxspareservers: 10 minspareservers: 5 root_options: ExecCGI, FollowSymLinks, Includes, IncludesNOEXEC, Indexes, MultiViews, SymLinksIfOwnerMatch serverlimit: 256 serversignature: Off servertokens: Full sslciphersuite: ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP:!kEDH startservers: 5 timeout: 30 I hope, I explained my problem nicely. Any help would be nice.

  Read the article

• Radius Authorization against ActiveDirectory and the users file

  - by mohrphium

  I have a problem with my freeradius server configuration. I want to be able to authenticate users against Windows ActiveDirectory (2008 R2) and the users file, because some of my co-workers are not listed in AD. We use the freeradius server to authenticate WLAN users. (PEAP/MSCHAPv2) AD Authentication works great, but I still have problems with the /etc/freeradius/users file When I run freeradius -X -x I get the following: Mon Jul 2 09:15:58 2012 : Info: ++++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 1 length 13 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: +++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: ++- else else returns updated Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] EAP Identity Mon Jul 2 09:15:58 2012 : Info: [eap] processing type tls Mon Jul 2 09:15:58 2012 : Info: [tls] Initiate Mon Jul 2 09:15:58 2012 : Info: [tls] Start returned 1 Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns handled Sending Access-Challenge of id 199 to 192.168.61.11 port 3072 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x85469e2a854487589fb1196910cb8ae3 Mon Jul 2 09:15:58 2012 : Info: Finished request 125. Mon Jul 2 09:15:58 2012 : Debug: Going to the next request Mon Jul 2 09:15:58 2012 : Debug: Waking up in 2.4 seconds. After that it repeats the login attempt and at some point tries to authenticate against ActiveDirectory with ntlm, which doesn't work since the user exists only in the users file. Can someone help me out here? Thanks. PS: Hope this helps, freeradius trying to auth against AD: Mon Jul 2 09:15:58 2012 : Info: ++[chap] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns noop Mon Jul 2 09:15:58 2012 : Info: [suffix] No '@' in User-Name = "testtest", looking up realm NULL Mon Jul 2 09:15:58 2012 : Info: [suffix] Found realm "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Stripped-User-Name = "testtest" Mon Jul 2 09:15:58 2012 : Info: [suffix] Adding Realm = "NULL" Mon Jul 2 09:15:58 2012 : Info: [suffix] Authentication realm is LOCAL. Mon Jul 2 09:15:58 2012 : Info: ++[suffix] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[control] returns ok Mon Jul 2 09:15:58 2012 : Info: [eap] EAP packet type response id 7 length 67 Mon Jul 2 09:15:58 2012 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns updated Mon Jul 2 09:15:58 2012 : Info: [files] users: Matched entry testtest at line 1 Mon Jul 2 09:15:58 2012 : Info: ++[files] returns ok Mon Jul 2 09:15:58 2012 : Info: ++[smbpasswd] returns notfound Mon Jul 2 09:15:58 2012 : Info: ++[expiration] returns noop Mon Jul 2 09:15:58 2012 : Info: ++[logintime] returns noop Mon Jul 2 09:15:58 2012 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Mon Jul 2 09:15:58 2012 : Info: ++[pap] returns noop Mon Jul 2 09:15:58 2012 : Info: Found Auth-Type = EAP Mon Jul 2 09:15:58 2012 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: +- entering group authenticate {...} Mon Jul 2 09:15:58 2012 : Info: [eap] Request found, released from the list Mon Jul 2 09:15:58 2012 : Info: [eap] EAP/mschapv2 Mon Jul 2 09:15:58 2012 : Info: [eap] processing type mschapv2 Mon Jul 2 09:15:58 2012 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Mon Jul 2 09:15:58 2012 : Info: [mschapv2] +- entering group MS-CHAP {...} Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] Told to do MS-CHAPv2 for testtest with NT-Password Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] No NT-Domain was found in the User-Name. Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: %{mschap:NT-Domain} -> Mon Jul 2 09:15:58 2012 : Info: [mschap] ... expanding second conditional Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --domain=%{%{mschap:NT-Domain}:-AD.CXO.NAME} -> --domain=AD.CXO.NAME Mon Jul 2 09:15:58 2012 : Info: [mschap] mschap2: 82 Mon Jul 2 09:15:58 2012 : Info: [mschap] Creating challenge hash with username: testtest Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=dd441972f987d68b Mon Jul 2 09:15:58 2012 : Info: [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=7e6c537cd5c26093789cf7831715d378e16ea3e6c5b1f579 Mon Jul 2 09:15:58 2012 : Debug: Exec-Program output: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program-Wait: plaintext: Logon failure (0xc000006d) Mon Jul 2 09:15:58 2012 : Debug: Exec-Program: returned: 1 Mon Jul 2 09:15:58 2012 : Info: [mschap] External script failed. Mon Jul 2 09:15:58 2012 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect Mon Jul 2 09:15:58 2012 : Info: ++[mschap] returns reject Mon Jul 2 09:15:58 2012 : Info: [eap] Freeing handler Mon Jul 2 09:15:58 2012 : Info: ++[eap] returns reject Mon Jul 2 09:15:58 2012 : Info: Failed to authenticate the user. Mon Jul 2 09:15:58 2012 : Auth: Login incorrect (mschap: External script says Logon failure (0xc000006d)): [testtest] (from client techap01 port 0 via TLS tunnel) PPS: Maybe the problem is located here: In /etc/freeradius/modules/ntlm_auth I have set ntlm to: program = "/usr/bin/ntlm_auth --request-nt-key --domain=AD.CXO.NAME --username=%{mschap:User-Name} --password=%{User-Password}" I need this, so users can login without adding @ad.cxo.name to their usernames. But how can I tell freeradius to try both logins, [email protected] (should fail) testtest (against users file - should work)

  Read the article

• howto only tunnel specific hosts route through openvpn client on tomato

  - by kcome

  I am relatively newbie in networking world although I did coding and know some sysadmin background for a long time. and here I'm only one step from my destination. The whole picture is : at home I use one LinkSys E3000 as the gateway(don't know yet if this is it's name), wireless AP and no other routing/switching devices. It serves 1 PC and 1 Mac with LAN, 1 Mac Mini + 1 iPad + 2 smartphones with WIFI. My goal is use an openvpn client on the E3000 (with tomato firmware) and make my iPad and smartphone's all WiFi traffic through it, and other devices route remain the same non-openvpn route. So far I'm able to connect openvpn client on E3000 to an openvpn server, tunnel all my devices' all traffic through that openvpn connection. What's left is howto selectively route by source IP (at least in my guessing) to the tunnel while don't bother others. I had learned some 'iptables' and 'route' in past few days however without much luck, so here comes my question. Here are some info which will help you get the structure. ifconfig -a output, some useless lines striped, and in the web interface C0:C1:C0:1A:E0:28 is WAN, C0:C1:C0:1A:E0:27 is LAN, C0:C1:C0:1A:E0:29 is 2.4G wifi AP, C0:C1:C0:1A:E0:2A is 5G wifi AP. root@router:/tmp/home/root# ifconfig -a br0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 eth2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:2A UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host ppp0 Link encap:Point-to-Point Protocol inet addr:172.200.1.43 P-t-P:172.200.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING MULTICAST MTU:1480 Metric:1 vlan1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:27 UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 vlan2 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:28 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 wl0.1 Link encap:Ethernet HWaddr C0:C1:C0:1A:E0:29 BROADCAST MULTICAST MTU:1500 Metric:1 brctl show output root@router:/tmp/home/root# brctl show bridge name bridge id STP enabled interfaces br0 8000.c0c1c01ae027 no vlan1 eth1 eth2 before openvpn route-up script root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 openvpn server push PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 8.8.8.8,route 172.20.0.1,topology net30,ping 10,ping-restart 120,ifconfig 172.20.0.6 172.20.0.5' openvpn's stock route-up script Apr 24 14:52:06 router daemon.notice openvpn[1768]: /sbin/ifconfig tun11 172.20.0.6 pointopoint 172.20.0.5 mtu 1500 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 72.14.177.29 netmask 255.255.255.255 gw 172.200.0.1 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 172.20.0.5 Apr 24 14:52:08 router daemon.notice openvpn[1768]: /sbin/route add -net 172.20.0.1 netmask 255.255.255.255 gw 172.20.0.5 route after openvpn root@router:/tmp/home/root# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.20.0.5 0.0.0.0 255.255.255.255 UH 0 0 0 tun11 72.14.177.29 172.200.0.1 255.255.255.255 UGH 0 0 0 ppp0 172.200.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 172.20.0.1 172.20.0.5 255.255.255.255 UGH 0 0 0 tun11 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 128.0.0.0 172.20.0.5 128.0.0.0 UG 0 0 0 tun11 0.0.0.0 172.200.0.1 0.0.0.0 UG 0 0 0 ppp0 something I had noticed and tried: * on the web interface of openvpn client there is an option "Create NAT on tunnel", if i check this, there is the following script (probably executed after openvpn connection established) root@router:/tmp/home/root# cat /tmp/etc/openvpn/fw/client1-fw.sh #!/bin/sh iptables -I INPUT -i tun11 -j ACCEPT iptables -I FORWARD -i tun11 -j ACCEPT iptables -t nat -I POSTROUTING -s 192.168.1.0/255.255.255.0 -o tun11 -j MASQUERADE if i uncheck this option, the last line will not appear. Then I guess probably the my issue will be solved by iptables and NAT related commands, I just haven't got enough knowledge to figure them out. I tried run iptables -t nat -I POSTROUTING -s 192.168.1.6 -o tun11 -j MASQUERADE manually after openvpn connected (192.168.1.6 is the ip address of my iPad), then my iPad get internet with openvpn tunnel, however all other devices can't reach internet. in case if needed, here is the iptables about NAT root@router:/tmp/home/root# iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination DROP all -- 0.0.0.0/0 192.168.1.0/24 WANPREROUTING all -- 0.0.0.0/0 172.200.1.43 upnp all -- 0.0.0.0/0 172.200.1.43 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 0.0.0.0/0 0.0.0.0/0 SNAT all -- 192.168.1.0/24 192.168.1.0/24 to:192.168.1.1 Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain WANPREROUTING (1 references) target prot opt source destination DNAT icmp -- 0.0.0.0/0 0.0.0.0/0 to:192.168.1.1 Chain upnp (1 references) target prot opt source destination DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5353 to:192.168.1.3:5353 Thanks in advance for helping and read this so much, I hope i made every info you need to give a help :)

  Read the article

• Intermittent Connection Issues to SQL Server 2008 R2 RTM

  - by Chandan Jha

  The problem I am facing is a very complex one and inspite of trying to gather a root cause of the problem, I am standing at the same place after 2 months with just bits and pieces of information.Here is a scenario: There is a windows 2003 server which uses an system DSN ODBC connection. I looked into the driver properties and it is as follows: Name Version File SQL Server 2000.86.3959.00 SQLSRV32.DLL Now, this system DSN has been given configured with TCP\IP in Network Libraries and 'determine port dynamically' is checked. Now, lets come to the database destination. It is hosted on Windows 2008 having SQL 2008 R2 RTM version 64-bit. Now, I will give you a an overview about the events that happen and whatever troubleshooting I could perform: I get an email saying 'blah blah' failed and the only message their application gets is 'cannot connect to database' I go the SQL Server logs and find the following information: Login failed for user ''. Reason: An attempt to login using SQL authentication failed. Server is configured for Windows authentication only. [CLIENT: 10.0.0.xx Error: 18456, Severity: 14, State: 58.] A quick search shows that this error may come when an SQL Server is configured with windows authentication but its not true. We have mixed mode and connection issue is intermittent. This SQL Server is configured to run on a local system account but since we use only SQL Server accounts to connect to this, there should not be any Kerberos errors. When I run a profiler trace and see only 'existing connections', i see a lot of them coming from my client server displaying the sql user but NO hostname is shown. Textdata field shows TCP\IP information along with some arithabort and ansi-null settings. Now, I tried looking into ring connectivity buffer by using following: SELECTCAST(record AS XML) FROM sys.dm_os_ring_buffers WHERE ring_buffer_type = 'RING_BUFFER_CONNECTIVITY' One sample output is: <ConnectivityTraceRecord> <RecordType>Error</RecordType> <RecordSource>Tds</RecordSource> <Spid>118</Spid> <SniConnectionId>5124905D-D1EC-460E-AD78-201050B78C67</SniConnectionId> <OSError>0</OSError> <SniConsumerError>18452</SniConsumerError> <SniProvider>7</SniProvider> <State>1</State> <RemoteHost>10.0.0.21</RemoteHost> <RemotePort>5008</RemotePort> <LocalHost>10.1.0.38</LocalHost> <LocalPort>1433</LocalPort> <RecordTime>6/6/2012 21:14:57.527</RecordTime> <TdsBuffersInformation> <TdsInputBufferError>0</TdsInputBufferError> <TdsOutputBufferError>0</TdsOutputBufferError> <TdsInputBufferBytes>120</TdsInputBufferBytes> </TdsBuffersInformation> <TdsDisconnectFlags> <PhysicalConnectionIsKilled>0</PhysicalConnectionIsKilled> <DisconnectDueToReadError>0</DisconnectDueToReadError> <NetworkErrorFoundInInputStream>0</NetworkErrorFoundInInputStream> <ErrorFoundBeforeLogin>0</ErrorFoundBeforeLogin> <SessionIsKilled>0</SessionIsKilled> <NormalDisconnect>0</NormalDisconnect> </TdsDisconnectFlags> </ConnectivityTraceRecord> <Stack> <frame id="0">0X000000000174C34B</frame> <frame id="1">0X0000000001748FDD</frame> <frame id="2">0X0000000002461001</frame> <frame id="3">0X0000000000C47E98</frame> <frame id="4">0X00000000008015AD</frame> <frame id="5">0X0000000000801492</frame> <frame id="6">0X00000000003CBBD8</frame> <frame id="7">0X00000000003CB8BA</frame> <frame id="8">0X00000000003CB6FF</frame> <frame id="9">0X00000000008E8FB6</frame> <frame id="10">0X00000000008E9175</frame> <frame id="11">0X00000000008E9839</frame> <frame id="12">0X00000000008E9502</frame> <frame id="13">0X0000000074E437D7</frame> <frame id="14">0X0000000074E43894</frame> <frame id="15">0X00000000775A652D</frame> Somehow all the errors show error number 18452 whereas I never found this error in my SQL logs where I see only 18456. I am just stuck on a dead end because this connection issue appears intermittently. Sorry for a long question but I hope if you read this, you can make out that I tried a lot at my end before giving up.

  Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >