Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 312/332 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• What does the 'Burst Rate' stat mean in HDTune?

  - by UpTheCreek

  I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks

  Read the article

• Query specific nameserver for a particular domain upon VPN connect

  - by MT

  Some background: I have a work laptop with Ubuntu 9.10 on it. I have a small network at home where I've been running some basic services (for myself/my family) for 10 some years. In my home network there is a nameserver (Fedora) running Bind 9 with two "views". One view is the "outside" view and it provides name resolution (to the Internet at large) for email, a wiki, and a couple of blogs. The "inside" view provides name resolution (to the internal RFC1918 addresses of theses servers) as well as all the inside hosts, network equipment, ...etc. I connect with an openvpn client to my home network from outside (such as work). What I'd like to be able to do is resolve names on my internal network across this VPN (so I get the RFC1918 "inside" responses) without fully changing my resolver to the DNS server at my hose. For example, if I connect to the VPN from work, I can change my resolver (by editing resolv.conf) to the DNS server at my house (across the VPN) and then successfully resolve all of the inside DNS names on my home network. The issue I have with this is that now I'm no longer able to resolve "inside" names provided by my work's DNS servers (because I'm using my home DNS server). Alternatively, I can connect to the VPN and access my home severs via IP addresses directly, but this is inconvenient and causes issues with Apache name-based hosting (among other things). In the end, the effect I'm trying to achieve is as follows: When I connect to the VPN I automatically start sending DNS requests for *.myhomedomain.com to my home nameserver, but any other requests continue to go the the nameserver I was using before (the one I received on my company LAN via DHCP). When I disconnect the VPN, requests for *.myhomedomain.com go back to the local LAN DNS server (e.g. all requests are going there now). I'm looking for suggestion at to how this can be accomplished.

  Read the article

• How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

  - by Gizmo

  I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

  Read the article

• Linux Distro - GUI similar to Windows

  - by DeaconDesperado

  I am in the process of refurbing several older laptop machines for use by a couple college guys we have in training to learn basic web development in python. These are students who intern at my company and are hoping to do some work when the summer comes building simple client-oriented webapps (learning the basics of OOP, MVC webapp design in flask, etc.). We're trying to function as the "practical" side of their education. I would like to get them set up on these machines we have sitting about, but I'd like to use a linux distro that would have a gui that closely approximates what they are being compelled to use at school (windows.) I don't really have much of a preference as far as GUI goes since much of what we'll be learning together is accomplished on the command line. I just see this as an easier adjustment for them while they are still reliant on a graphical environment. In the past I'd go straight for Ubuntu, but since they started using the Unity GUI the responsiveness overall can be pretty clunky on older machines, especially since these machines (there are four of them) run the gambit on specs (though all are at least 1.0Ghz and none have anything better than basic integrated video.) Has anyone had to setup a similar working environment in Mint, bare Debian or Zorin? Thanks.

  Read the article

• nVidia performance with newer X and newer driver abysmal with Compiz

  - by Nakedible

  I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem. EDIT: In the end, nothing really worked, and I got really annoyed with the state of compiz and its support in Debian. Many nVidia driver revisions have passed and I am using Gnome 3 now, so I am accepting the best answers to this question even though the issue was not resolved.

  Read the article

• Is it possible to to create a live linux iso containing a win xp virtual machine?

  - by mark

  I would like to have a Linux live system that contains a Windows xp virtual machine. This would be run from a bootable USB flash drive. My attempts so far have been unsuccessful. I created a Lubuntu 12.04 virtual machine with VMware. I updated and configured it to my needs, and installed Virtualbox. I then created a Windows xp vm with Virtualbox in the Lubuntu vm. I tested everything and everything worked, including USB devices. I installed Remastersys in the Lubuntu vm, copied the xp vm folder to the /etc/skel folder then created the custom iso with remastersys. I burned the iso and tested it on a laptop. It worked flawlessly. All programs and wireless networking worked. My problem was the xp vm. Virtualbox started fine but would not run the vm. I have the following error: Result Code: NS_ERROR_FAILURE (0x80004005) Component: VirtualBox Interface: IVirtualBox {c28be65f-1a8f-43b4-81f1-eb60cb516e66}. I ran remastersys again changing the permissions on the skel folder to R W for everyone. I also logged into Lubuntu as root and ran remastersys again. Each iso I created worked fine but would not start the xp vm inside. The last attempt virtualbox gave me an access error stating it can not access the virtual disk. Is what I want to do possible? In theory I don't see why it would not work. Is it a permissions issue? Should I create the iso then add the xp vm after by editing the iso by hand? Using a vm and not real hardware as a build machine a problem? Any ideas? keep any responses in laymens terms. I am still a Linux novice.

  Read the article

• SQL Server 2008 services error on account

  - by TheDude

  I installed SQL Server Enterprise, but can't get it to work. It is a stand alone, on a laptop for development purposes. No network is involved, no other users. The OS is windows 7. Now, I keep receiving eventId 7000, which means that access is denied for the user (the user was Network Services). So, after reading up on it, I kind of got the idea that a user account should be created with minimal privileges. So, off I went and added a user, SQLservices. In the SQL Server Configuration Manager I right clicked SQL Server(MSSQLSERVER), and in the properties I added my new user. Well, here's mister eventId 7000 again. I don't get what I am doing wrong. Also, this new user ends up on my start-up screen. I don't think I want that... I mean, it would be weird to have x number of users crowding up my start-up screen just because I created those for my windows services... The error I get when I add the user in SQL Server Configuration Manager is as follows: Permission Denied. [0x80070005] Helps!

  Read the article

• How to fix Truecrypt MBR using Command Prompt or Linux live USB?

  - by Michal Stefanow

  I was playing with TrueCrypt and decided to make a fresh installation of Windows 7 from USB stick. Unfortunately Windows 7 installer: "setup was unable to create a new system partition" My entire HDD has been formatted and is visible as 320GB unallocated space, but no fdisk nor Windows 7 installer nor Windows XP installer could help. (Windows XP doesn't even see the HDD, it sees only USB stick and says "not enough space to install") It may be related to Truecrypt and pre-boot authentification, boot loader and/or MBR. As I don't have optical device I could not have created rescue disk. Right now I need a rescue of some kind, supposingly by erasing/fixing MBR using Linux live USB or using Command Promt. Another approach is to click "repair your comuter" menu from Windows 7 installer then click "restore your computer", then click OK upon error and get access to Command Prompt. Yet another another approach is to start computer without Linux USB I receive this: error:unknown filesystem. grub rescue> Any help would be greatly appreciated as my laptop is kind of not fully operational now. UPDATE: This was asked long time ago, ended up formatting everything (eventually it worked using different bootable USB)...

  Read the article

• Windows 7 not booting up and stuck at startup repair

  - by mikimr

  I've been having issues with Windows 7 Home Premium on a Lenovo laptop. At first, it would not start up normally at all. I started it in Safe Mode, where I disabled all non-MS services and tried again to no avail. It then goes into Startup repair where it failed several times. I tried copying the original registry settings, still the same. I resorted to booting with an Ubuntu DVD, where I ran the boot-repair, where it is supposed to correct the Windows boot. No luck. I used Win7 DVD to start up from there, where I had the option to install or repair. I chose the repair, got into command prompt, ran chkdsk /i /r, where it found 3 unreadable segments, went through the 2nd step without issues, and the 3rd step completed with some errors (can't recall the exact errors). When I restarted the machine, it went to straight to the Stratup Repair, indicating "Attempting repairs... Repairing dis errors. This might take over an hour to complete." It's been like this for nearly 15 hours. When I try to cancel or close the Startup Repair window, I get a message "The current repair operation cannot be cancelled." Should I let it run or force shut the machine? If force shut, how can I resolve this problem? Thanks.

  Read the article

• Linux on MacBook Air

  - by enduser

  I'm thinking of getting a MacBook Air. The answers to this post will help me make my decision. My questions and my understanding of current solutions are: How difficult is it to install a Linux-based OS (like Fedora or Ubuntu)? I've heard a little about rEFIt, but am not sure what to make of it. Is it completely necessary? Do I still need it if I don't plan to dual boot with Mac OS X? Also a dual-boot isn't necessary, I'd just like to run Fedora/Ubuntu by itself, but I'm curious to know if a dual boot is simple. Does everything 'just work'? In my current laptop I need to add a wireless driver (Broadcom card). I've heard Macs use Broadcom wireless cards. Will this be an issue? How about graphics/touchpad (& multitouch)/sound? I'm aware there are tutorials out there on how to install some older version of some os on your Mac, but my questions are a bit more general: Will it be easy to use (install and configure drivers for) recent Linux distributions with a new MacBook Air? Note: I don't mind extra configuration, but would like to know where it'll be necessary, because if it's too much of a hassle I'll look at other hardware.

  Read the article

• Is it possible to update Lenovo T500 hybrid graphics driver?

  - by Shiki

  Hope someone had the same problem before. My laptop comes with two video "cards". Intel MHD4500 and ATI Radeon HD3650 (mobility). I can switch between them with the "Lenovo Battery Manager" from the taskbar. All good, but Lenovo provides the driver for this. The problem with that driver is they are a bit old. (Both Intel and ATI). For example I doubt I have any gpu accel in flash, and I experience some problem with dual display setup, which the new ATI driver would solve. Basically I want to create a new driver (I read a topic where a guy said its possible... baaack then when I was searching for something else). One needs a special ATI driver creation utility or what... sorry I can't recall the name of it. Thanks in advance. (Ah yes I forgot: The OS is a Windows 7 x64 Ultimate.)

  Read the article

• Recovery disk Windows 8 HP Pavilion g6

  - by fpghost

  I recently purchased a HP Pavilion g6 laptop running Windows 8. I want to either obtain the Windows 8 ISO or make some kind of recovery disk that would allow me to restore the system if things go wrong. The HP Pavilion comes with the 'HP Recovery Manager' which I thought may do the job, but on running it and putting in a DVD-R as requested it seems to just hang for a number of hours without doing a thing (the disk sounds like it's spinning for a few minutes but then goes silent). I then tried 'recdisc.exe' but I get the error System Repair could not be created The device reported unexpected or invalid data for a command. (0xC0AA02FF) Next I obtained my Windows 8 product key using the software ProduKey thinking this would allow me to go to the Microsoft website and download the Windows 8 ISO, but as far as I can tell all that is available is the upgrade which can be used if one is running something like Windows 7. Can anyone advise? EDIT: after a reboot recdisc.exe did work; I think the problem was due to some Windows updates needing a reboot, but never the less I would like a full Windows 8 ISO if possible.

  Read the article

• FTP Server upload and filesystem questions

  - by Alex

  I'm a photographer who mainly does event photography. A while ago I bought myself a Nikon WT-4 wireless transmitter, a small device which connects via USB to my Nikon D700 DSLR, and then establishes a WiFi connection to an existing WLAN. It can then upload any pictures I take via FTP to an FTP server somewhere in the network. On my laptop I then have a piece of software which will check a given folder on the disk regularly, this software is smart enough to look at the modified file timestamp, if this timestamp is less than 10 seconds ago, it will not attempt to import the folder and skip the file in this iteration of the import scan. The problem I've discovered seems to be inherent to the FTP protocol, as I have the same problem with Windows 7 built in IIS server, as I do with FileZilla FTP server. When the transmitter starts to upload a file, the FTP server will create a small 300-500 KB file with the correct filename on the disk, but then do nothing with the file until it has completely received the file via FTP. So it seems to create this small dummy file, and then buffer the remainder of the FTP upload until it's finished, and then dump the rest of the file into the dummy file making it the correct size. Problem is, these uploads take about 15-30 seconds depending on reception, but since the folder watch tool will already try to import any file older than 10 seconds, it will always try to import the small dummy files which obviously fails as they're not copmlete yet. Is there any way to 'disable' this behaviour? Ideally I would like my file only to show up once it's been completely uploaded. Or perhaps someone knows another FTP server application (it has to run on win7) which does not show this behaviour?

  Read the article

• How can I get mouse capture to work in virtualbox when I move guest window to second monitor?

  - by Dan

  I'm running VirtualBox on a Win7 host. Guest OS is Centos. My setup is a laptop (screen 1) with a huge external monitor (screen 2). I'm only telling Centos there is one monitor though. When I start up VirtualBox on screen 1, the mouse capture works fine. I don't have mouse integration because (I think) the kernel on Centos is too old to support it. That's fine, I don't mind doing the Right-Control thing. The problem I have is that when I drag the whole VM window over to my second monitor, the mouse capture doesn't work right anymore. I click inside the VM and can move the VM cursor a little bit, but I can't always get to the edges of the VM screen -- before I get all the way to an edge, the cursor will escape from the VM as if I had hit right-control. But it's still captured according to the icon, and if I then hit right-control, the guest cursor jumps to a different screen location. My workaround: if I have the VM window mostly on screen 2, but a small corner of it still on screen 1, then the mouse capture works correctly. Is there a setting to make this work better?

  Read the article

• Deleting old system folders from a drive that is no longer the windows installation drive

  - by grenade

  I dropped my laptop and was no longer able to boot. There were error messages about a corrupt boot record. Replacing the hard drive and reinstalling Win 7 was how I dealt with it. The old drive still appears to be good and I can read and write to it when I connect it as a second drive and mount as D:. However, if I try to recover the space being used by the windows, programdata, program files & program files(x86) folders, by deleting them I get error messages about needing permission from trustedinstaller. If I set myself as the owner of the folders and retry the delete I get error messages about needing permission from myself! Since I'm pretty sure that I have permission from myself to delete the folders, I can only assume that the OS or file system has gotten its panties twisted. I have tried shift, right click, delete from explorer and also if I run "del /f /s /q D:\Windows" from an admin command prompt, I get a succession of Access is denied messages as well. How do I delete D:\Windows, D:\ProgramData, D:\Program Files & D:\Program Files(x86) from a drive that is not the Windows installation drive?

  Read the article

• Running Solr on VPS problem

  - by Camran

  I have a VPS with Ubuntu OS. I run solr om my local machine (windows xp laptop) just fine. I have configured Jetty, and Solr just the same way as on my computer, but on the server. I have also downloaded the JRE and installed it on the server. However, whenever I try to run the start.jar file, the PuTTY terminal shows a bunch of text but gets stuck. I could pase the text here but it is very long, so unless somebody wants to see it I wont. Also, I cant view the solr admin page at all. Does anybody have experience in this kind of problem? Maybe java isn't correctly installed? It is a VPS so maybe installation is different. Thanks UPDATE: These are the last lines from the terminal, in other words, this is where it stops every time: INFO: [] webapp=null path=null params={event=firstSearcher&q=static+firstSearcher+warming+query+from+solrconfig.xml} hits=0 status=0 QTime=9 May 28, 2010 8:58:42 PM org.apache.solr.core.QuerySenderListener newSearcher INFO: QuerySenderListener done. May 28, 2010 8:58:42 PM org.apache.solr.handler.component.SpellCheckComponent$SpellCheckerListener newSearcher INFO: Loading spell index for spellchecker: default May 28, 2010 8:58:42 PM org.apache.solr.core.SolrCore registerSearcher INFO: [] Registered new searcher Searcher@63a721 main Also you should know that I installed jetty by just dragging the folders from my HD to the VPS server.

  Read the article

• Windows 7 explorer crashing trying to read external hard disk

  - by Mario De Schaepmeester

  I have a 1TB Western Digital hard drive which is almost full and last time I tried to plug it into my laptop, I got a Windows dialog saying "this hard drive needs to be formatted". I did not panic because I have experienced things like this before and I know it's often solved by simply re-inserting the drive. Now however, whenever I plug it in and try to browse it in explorer by going to "computer", the explorer process crashes after a while. I simply close explorer since it takes ages trying to read the disk and nothing happens. After searching on the internet, the best thing to do would be a chkdsk. I tried it via properties in explorer (which also took a good 5 minutes to open up), locks up as well, after waiting a couple of minutes it says there's no access to the disk so a chkdsk is not possible... I want to make clear that I always use safe removal before pulling out the USB cable. Last time however, safe removal just would not work and when trying to shut down Windows, the logoff screen just would not disappear (I've waited at least 10 minutes or so) and I powered off the PC by force. This may be the cause of the problems but the disk was still recognised immediately after that. I really don't want to format this thing because it contains C: clones of 3 computers and a lot of other stuff that I don't want to re-copy. What would be the best course of action? Update I got chkdsk working via the command line. I used the /F and /R options. I already got a bunch of lines saying "file record segment X is unreadable" or whatever it is in English, my OS is Dutch. It looks bad... Will chdsk repair these errors?

  Read the article

• Router(s) Issue: DNS quries sporadically fail with multiple computers hooked in

  - by bob-the-destroyer

  Basically, after anywhere from 5-60 minutes, DNS queries fail for a few minutes, then slowly begin to resolve correctly. Then the cycle repeats. This occurs only when more than one computer is on the network. All computers on the network experiences the same sporadic DNS outage at the same time. Wireless or wired, Linux or Windows, fresh OS install or old, browser or ping, same symptoms. Duplicated on 3 routers (not chained together, mind you) and 3 ISP's and 3 separate locations over the past several months. The only common theme is a single 5-yo WIN XP laptop which has been in use on the network throughout all this. There also may be anywhere between 1 - 10 devices hooked up wired or wirelessly at a time. The only reprieve I have from this torture is by using any VPN to an outside source - always smooth sailing. I typically set up any router to a) use WPA2/etc security; b) MAC whitelist; c) UPNP OFF (if available); d) always update firmware when available; e) obtain DNS from ISP automatically; f) set the router to act as DHCP server for the internal network. Adjusting channels has no effect. Any ideas?

  Read the article

• Eclipse CDT wont recognize standard library

  - by Mike G

  I work primarily on my desktop, but I started working on my mac laptop and noticed a problem with eclipse CDT. The standard library was underlined yellow and cout wouldn't work (It wouldn't recognize/find it). I tried restarting the program and that didn't work. I then tried to see if xcode would work, found that the version of xcode was too old, and updated xcode. Eclipse still didn't work, but xcode did. I tried re-installing eclipse to the new version and re-installing cdt. It still wouldn't work. Restarting my computer wont work either. I'm not sure if this helps (or even matters/applies) but when I type g++ --version into terminal, it doesn't work. (I don't know if that matters but some tutorial told me to do that to check if the compiler was working). So, in review, I have: Re-installed eclipse Restarted my computer Re-installed xcode (which I think has all the compilers eclipse uses.) Updated Eclipse Typed g++ --version to test compiler.

  Read the article

• Is this DVD drive broken? Brand new, i need help convincing

  - by acidzombie24

  I am asking bc i know dell is going to give me a problem. How do i know if my DVD is broken on my laptop? i burnt 4 DL disc and they ALL failed, i called and dell suggested roxio. I used it and burnt 1 disc without error and the 2nd disc with an error. With both apps there were no 'problems' during the burning process only failed on the verification process. Some of these bad disc dont work on other PCs and one locks up windows when i click a specific file. Does that sound like a broken burner to you guys? when i called dell they told me since it can read disc properly 100% of the time and software doesnt fail in the burning process its not a broken drive _. They forward me to software support who demand a fee (i think $100) to help me fix my software. I am annoyed bc i dont want to be on the phone for them to watch me burn a dvd and since i burned it once correctly i dont want to happen to burn correctly again to have them say they solved my problem (doing nothing) and charge me refusing to refund. -edit- The errors i got were 1) the request could not be performed because of an I/O device error 2) Windows locking up when opening 1 specific file 3) Cannot copy : Data error (crc) NOTE: the file that causes the problems are random every disc

  Read the article

• Should I buy more RAM for my computer or a better CPU?

  - by Reijer The Coder

  I have recently bought a new laptop, an ASUS N56VJ-S4149H. I bought it to use it in all possible ways I could want, so that would be gaming downloading and streaming movies browsing the web and programming software. So far it has been running great but one thing annoys me a little bit. I frequently play Mount&Blade: Warband, it's a great game and you should check it out. Everything runs smoothly but only when I turn down the 'Texture Detail'. Otherwise it will lag a lot and I can't really play. Now my question is: Is this a problem of not enough RAM? At first I was really sure it was but after thinking about for a while I'm not anymore. My computer only has 4 Gigabytes of RAM and there is still a slot open. So will it improve when I buy another 8 Gigabytes? EDIT: It has an Nvidia GeForce GT 635M inside. and an Intel Core i5 3230M CPU with 2,6 GHz. Help and answers are really appreciated. Thanks to all.

  Read the article

• Can't access YouTube

  - by Agentleader1

  I can not seem to connect to YouTube at all. If I connect directly to YouTube (youtube.com) I get this: And if I try to connect via video directly (youtube.com/watch?v=), I get this: Here's how this isn't a web issue: I have malware on my computer I believe. And the question here is, how do I get rid of it, or what possible issue could this be? I can verify this is not a website issue or wifi issue, I've tried to connect on another computer in my wifi, and it worked. It is the local machine issue. I've tried to get rid of malware at my best and also have tried to disable possible virus extensions. All can out as the same result: no help. Also, I am unable to find these hiding viruses. I used malware-bytes and Microsoft Security Essentials. Edit: This is OBVIOUSLY Windows. I am currently running on a laptop Windows 7 Home Premium 4gb ram 64-bit os Lifebook series manufactured by Fujitsu America, Inc. Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz nslookup youtube.com:

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• Which components should I invest in.. for a backup machine.

  - by Senthil

  I am a freelance developer. I have a PC, a laptop and an old testing and file server machine. I might add one or two in future. I want to have an on-site backup machine that can handle backups of ALL these machines - file backups, MySQL backups, backup of subversion repository, etc.. When building the machine, which components should I invest more in? Examples: The cabinet should have lots of room for expansion. Hard disk size should be large. But I guess hard disk speed need not be high (?) But other components like, RAM, PSU, Processor, Network card, Cooling, etc.. how much relative importance do these have in a backup machine? Which of these components should be high-end or large, and which ones need not be? Some Idea of the load: There will TBs of data. File backups and subversion repository backups will at least be done daily. MySQL backups done weekly. assume 3 machines at the moment and somewhere around 10 machines in the future.

  Read the article

• How do I fully share a Hard Drive on my Local Network?

  - by GingerLee

  I have 4 computers connected to a router (DD-WRT) My main PC is Windows 7 (Home Premium). This machine has 2 Hard Disks: HD1 is used for my OS and the other (HD2) is used to store files. My 3 other machines are 1. Ubuntu Destop that I use to learn about linux, 2. A Mac OSX laptop, and 3. A netbook running windows 7. How do I easily share HD2 with my other machines? I would like all my machines to have full access & permissions to HD2 however I would like to RESTRICT access to only PCs that are connected to my router (either via LAN and WiFi) --- btw, I know this is not very secure due to WiFi vulnerability , however, I currently MAC address restrict WiFi connections my router. Extra Info: I have already tried to use the Windows Folder Sharing feature: i.e. I right click over the icon of HD2, and click on the Sharing Tab, but in sub-window labeled "Network File and Folder Sharing", the "Share" button is grayed out. I can click on "Advanced Shared" but that just takes me to a screen in which I have to set certain permissions. What is not clear to me is: How do I set a criteria that shares HD2 with all computer connected to my router?

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >