Search Results

Search found 8354 results on 335 pages for 'count boxer'.

Page 313/335 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post.

    Read the article

  • What's the difference between find and findstr commands in Windows?

    - by Prashant Bhate
    In Windows, what are the differences between find and findstr commands? Both seems to search text in files: find c:\>find /? Searches for a text string in a file or files. FIND [/V] [/C] [/N] [/I] [/OFF[LINE]] "string" [[drive:][path]filename[ ...]] /V Displays all lines NOT containing the specified string. /C Displays only the count of lines containing the string. /N Displays line numbers with the displayed lines. /I Ignores the case of characters when searching for the string. /OFF[LINE] Do not skip files with offline attribute set. "string" Specifies the text string to find. [drive:][path]filename Specifies a file or files to search. If a path is not specified, FIND searches the text typed at the prompt or piped from another command. findstr c:\>findstr /? Searches for strings in files. FINDSTR [/B] [/E] [/L] [/R] [/S] [/I] [/X] [/V] [/N] [/M] [/O] [/P] [/F:file] [/C:string] [/G:file] [/D:dir list] [/A:color attributes] [/OFF[LINE]] strings [[drive:][path]filename[ ...]] /B Matches pattern if at the beginning of a line. /E Matches pattern if at the end of a line. /L Uses search strings literally. /R Uses search strings as regular expressions. /S Searches for matching files in the current directory and all subdirectories. /I Specifies that the search is not to be case-sensitive. /X Prints lines that match exactly. /V Prints only lines that do not contain a match. /N Prints the line number before each line that matches. /M Prints only the filename if a file contains a match. /O Prints character offset before each matching line. /P Skip files with non-printable characters. /OFF[LINE] Do not skip files with offline attribute set. /A:attr Specifies color attribute with two hex digits. See "color /?" /F:file Reads file list from the specified file(/ stands for console). /C:string Uses specified string as a literal search string. /G:file Gets search strings from the specified file(/ stands for console). /D:dir Search a semicolon delimited list of directories strings Text to be searched for. [drive:][path]filename Specifies a file or files to search. Use spaces to separate multiple search strings unless the argument is prefixed with /C. For example, 'FINDSTR "hello there" x.y' searches for "hello" or "there" in file x.y. 'FINDSTR /C:"hello there" x.y' searches for "hello there" in file x.y. Regular expression quick reference: . Wildcard: any character * Repeat: zero or more occurances of previous character or class ^ Line position: beginning of line $ Line position: end of line [class] Character class: any one character in set [^class] Inverse class: any one character not in set [x-y] Range: any characters within the specified range \x Escape: literal use of metacharacter x \<xyz Word position: beginning of word xyz\> Word position: end of word For full information on FINDSTR regular expressions refer to the online Command Reference.

    Read the article

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

    Read the article

  • linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

    - by devicerandom
    We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

    Read the article

  • Apache Getting Bogged Down By Certain Script (Wp-Cron.php) - How To Kill Process Automatically

    - by user50037
    I have a server that is running a number of wordpress blogs, and a number of them have several hundred/thousand posts. Every couple of days, the server slows to a crawl due to a file being run on Wordpress called WP-cron.php. My entire apache process log turns into this : http:// imgur.com/A7K9k.png Times that by quite a bit. And server no go. Each process takes up about 1.1% of ram. And when we have 50 of them on the go. It gets insane. Not all of them are coming from the same blog, they are pretty widespread. In the Apache process page of WHM, they are usually ALL set to the status of "C", which means closing. But they can sit there until they crash the server, and they still hold the memory. Just google "wp-cron.php load" and you will find plenty of people with similar issues. In anycase, we have think it is down to users adding a tonne of dead "pinglists" to their wordpress installation. Which in turn wordpress loops through them endlessly. Problem number 1. Does anyone have any other suggestions about what would cause the Wordpress file wp-cron.php to loop endlessly. I still think it is down to pings, because all of the people we have contacted about their account load going sky high, have had massive ping lists. Problem number 2. Even if it is down to excessive pinglists in wordpress. We cannot be babying every single account on the server waiting for it to start spawning the wp-cron processes. It often happens overnight, and I start getting SMS alerts at 2am about the load. I have CSF installed, which apparently would have ended the processes if they ran over XXX time. But I have been told that it won't catch the processes because they end up in this state of "closing" (They show up as "C" on the Apache page of WHM). Apparently CSF will only kill processes that are "running" which C does not count. I have seen various other scripts such as : http://dltj.org/article/die-apache-die/ . I took a look at the stat of /proc. But I was boggled at which delimited part was the time running. And if there was any way I could connect it back to an actual Apache process, so that I could see what file was running (So only close connections connected to wp-cron.php, with a state of "C"). Overall I know Problem 2 glosses over the real reason. But I do put the whole thing to excessive pinglists in Wordpress. But I just cannot sit there and babysit every single installation 24/7. So I need a way to save the server when I am not available. Any help would be much appreciated.

    Read the article

  • C#: System.Collections.Concurrent.ConcurrentQueue vs. Queue

    - by James Michael Hare
    I love new toys, so of course when .NET 4.0 came out I felt like the proverbial kid in the candy store!  Now, some people get all excited about the IDE and it’s new features or about changes to WPF and Silver Light and yes, those are all very fine and grand.  But me, I get all excited about things that tend to affect my life on the backside of development.  That’s why when I heard there were going to be concurrent container implementations in the latest version of .NET I was salivating like Pavlov’s dog at the dinner bell. They seem so simple, really, that one could easily overlook them.  Essentially they are implementations of containers (many that mirror the generic collections, others are new) that have either been optimized with very efficient, limited, or no locking but are still completely thread safe -- and I just had to see what kind of an improvement that would translate into. Since part of my job as a solutions architect here where I work is to help design, develop, and maintain the systems that process tons of requests each second, the thought of extremely efficient thread-safe containers was extremely appealing.  Of course, they also rolled out a whole parallel development framework which I won’t get into in this post but will cover bits and pieces of as time goes by. This time, I was mainly curious as to how well these new concurrent containers would perform compared to areas in our code where we manually synchronize them using lock or some other mechanism.  So I set about to run a processing test with a series of producers and consumers that would be either processing a traditional System.Collections.Generic.Queue or a System.Collection.Concurrent.ConcurrentQueue. Now, I wanted to keep the code as common as possible to make sure that the only variance was the container, so I created a test Producer and a test Consumer.  The test Producer takes an Action<string> delegate which is responsible for taking a string and placing it on whichever queue we’re testing in a thread-safe manner: 1: internal class Producer 2: { 3: public int Iterations { get; set; } 4: public Action<string> ProduceDelegate { get; set; } 5: 6: public void Produce() 7: { 8: for (int i = 0; i < Iterations; i++) 9: { 10: ProduceDelegate(“Hello”); 11: } 12: } 13: } Then likewise, I created a consumer that took a Func<string> that would read from whichever queue we’re testing and return either the string if data exists or null if not.  Then, if the item doesn’t exist, it will do a 10 ms wait before testing again.  Once all the producers are done and join the main thread, a flag will be set in each of the consumers to tell them once the queue is empty they can shut down since no other data is coming: 1: internal class Consumer 2: { 3: public Func<string> ConsumeDelegate { get; set; } 4: public bool HaltWhenEmpty { get; set; } 5: 6: public void Consume() 7: { 8: bool processing = true; 9: 10: while (processing) 11: { 12: string result = ConsumeDelegate(); 13: 14: if(result == null) 15: { 16: if (HaltWhenEmpty) 17: { 18: processing = false; 19: } 20: else 21: { 22: Thread.Sleep(TimeSpan.FromMilliseconds(10)); 23: } 24: } 25: else 26: { 27: DoWork(); // do something non-trivial so consumers lag behind a bit 28: } 29: } 30: } 31: } Okay, now that we’ve done that, we can launch threads of varying numbers using lambdas for each different method of production/consumption.  First let's look at the lambdas for a typical System.Collections.Generics.Queue with locking: 1: // lambda for putting to typical Queue with locking... 2: var productionDelegate = s => 3: { 4: lock (_mutex) 5: { 6: _mutexQueue.Enqueue(s); 7: } 8: }; 9:  10: // and lambda for typical getting from Queue with locking... 11: var consumptionDelegate = () => 12: { 13: lock (_mutex) 14: { 15: if (_mutexQueue.Count > 0) 16: { 17: return _mutexQueue.Dequeue(); 18: } 19: } 20: return null; 21: }; Nothing new or interesting here.  Just typical locks on an internal object instance.  Now let's look at using a ConcurrentQueue from the System.Collections.Concurrent library: 1: // lambda for putting to a ConcurrentQueue, notice it needs no locking! 2: var productionDelegate = s => 3: { 4: _concurrentQueue.Enqueue(s); 5: }; 6:  7: // lambda for getting from a ConcurrentQueue, once again, no locking required. 8: var consumptionDelegate = () => 9: { 10: string s; 11: return _concurrentQueue.TryDequeue(out s) ? s : null; 12: }; So I pass each of these lambdas and the number of producer and consumers threads to launch and take a look at the timing results.  Basically I’m timing from the time all threads start and begin producing/consuming to the time that all threads rejoin.  I won't bore you with the test code, basically it just launches code that creates the producers and consumers and launches them in their own threads, then waits for them all to rejoin.  The following are the timings from the start of all threads to the Join() on all threads completing.  The producers create 10,000,000 items evenly between themselves and then when all producers are done they trigger the consumers to stop once the queue is empty. These are the results in milliseconds from the ordinary Queue with locking: 1: Consumers Producers 1 2 3 Time (ms) 2: ---------- ---------- ------ ------ ------ --------- 3: 1 1 4284 5153 4226 4554.33 4: 10 10 4044 3831 5010 4295.00 5: 100 100 5497 5378 5612 5495.67 6: 1000 1000 24234 25409 27160 25601.00 And the following are the results in milliseconds from the ConcurrentQueue with no locking necessary: 1: Consumers Producers 1 2 3 Time (ms) 2: ---------- ---------- ------ ------ ------ --------- 3: 1 1 3647 3643 3718 3669.33 4: 10 10 2311 2136 2142 2196.33 5: 100 100 2480 2416 2190 2362.00 6: 1000 1000 7289 6897 7061 7082.33 Note that even though obviously 2000 threads is quite extreme, the concurrent queue actually scales really well, whereas the traditional queue with simple locking scales much more poorly. I love the new concurrent collections, they look so much simpler without littering your code with the locking logic, and they perform much better.  All in all, a great new toy to add to your arsenal of multi-threaded processing!

    Read the article

  • Installing Lubuntu 14.04.1 forcepae fails

    - by Rantanplan
    I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

    Read the article

  • Parallelism in .NET – Part 5, Partitioning of Work

    - by Reed
    When parallelizing any routine, we start by decomposing the problem.  Once the problem is understood, we need to break our work into separate tasks, so each task can be run on a different processing element.  This process is called partitioning. Partitioning our tasks is a challenging feat.  There are opposing forces at work here: too many partitions adds overhead, too few partitions leaves processors idle.  Trying to work the perfect balance between the two extremes is the goal for which we should aim.  Luckily, the Task Parallel Library automatically handles much of this process.  However, there are situations where the default partitioning may not be appropriate, and knowledge of our routines may allow us to guide the framework to making better decisions. First off, I’d like to say that this is a more advanced topic.  It is perfectly acceptable to use the parallel constructs in the framework without considering the partitioning taking place.  The default behavior in the Task Parallel Library is very well-behaved, even for unusual work loads, and should rarely be adjusted.  I have found few situations where the default partitioning behavior in the TPL is not as good or better than my own hand-written partitioning routines, and recommend using the defaults unless there is a strong, measured, and profiled reason to avoid using them.  However, understanding partitioning, and how the TPL partitions your data, helps in understanding the proper usage of the TPL. I indirectly mentioned partitioning while discussing aggregation.  Typically, our systems will have a limited number of Processing Elements (PE), which is the terminology used for hardware capable of processing a stream of instructions.  For example, in a standard Intel i7 system, there are four processor cores, each of which has two potential hardware threads due to Hyperthreading.  This gives us a total of 8 PEs – theoretically, we can have up to eight operations occurring concurrently within our system. In order to fully exploit this power, we need to partition our work into Tasks.  A task is a simple set of instructions that can be run on a PE.  Ideally, we want to have at least one task per PE in the system, since fewer tasks means that some of our processing power will be sitting idle.  A naive implementation would be to just take our data, and partition it with one element in our collection being treated as one task.  When we loop through our collection in parallel, using this approach, we’d just process one item at a time, then reuse that thread to process the next, etc.  There’s a flaw in this approach, however.  It will tend to be slower than necessary, often slower than processing the data serially. The problem is that there is overhead associated with each task.  When we take a simple foreach loop body and implement it using the TPL, we add overhead.  First, we change the body from a simple statement to a delegate, which must be invoked.  In order to invoke the delegate on a separate thread, the delegate gets added to the ThreadPool’s current work queue, and the ThreadPool must pull this off the queue, assign it to a free thread, then execute it.  If our collection had one million elements, the overhead of trying to spawn one million tasks would destroy our performance. The answer, here, is to partition our collection into groups, and have each group of elements treated as a single task.  By adding a partitioning step, we can break our total work into small enough tasks to keep our processors busy, but large enough tasks to avoid overburdening the ThreadPool.  There are two clear, opposing goals here: Always try to keep each processor working, but also try to keep the individual partitions as large as possible. When using Parallel.For, the partitioning is always handled automatically.  At first, partitioning here seems simple.  A naive implementation would merely split the total element count up by the number of PEs in the system, and assign a chunk of data to each processor.  Many hand-written partitioning schemes work in this exactly manner.  This perfectly balanced, static partitioning scheme works very well if the amount of work is constant for each element.  However, this is rarely the case.  Often, the length of time required to process an element grows as we progress through the collection, especially if we’re doing numerical computations.  In this case, the first PEs will finish early, and sit idle waiting on the last chunks to finish.  Sometimes, work can decrease as we progress, since previous computations may be used to speed up later computations.  In this situation, the first chunks will be working far longer than the last chunks.  In order to balance the workload, many implementations create many small chunks, and reuse threads.  This adds overhead, but does provide better load balancing, which in turn improves performance. The Task Parallel Library handles this more elaborately.  Chunks are determined at runtime, and start small.  They grow slowly over time, getting larger and larger.  This tends to lead to a near optimum load balancing, even in odd cases such as increasing or decreasing workloads.  Parallel.ForEach is a bit more complicated, however. When working with a generic IEnumerable<T>, the number of items required for processing is not known in advance, and must be discovered at runtime.  In addition, since we don’t have direct access to each element, the scheduler must enumerate the collection to process it.  Since IEnumerable<T> is not thread safe, it must lock on elements as it enumerates, create temporary collections for each chunk to process, and schedule this out.  By default, it uses a partitioning method similar to the one described above.  We can see this directly by looking at the Visual Partitioning sample shipped by the Task Parallel Library team, and available as part of the Samples for Parallel Programming.  When we run the sample, with four cores and the default, Load Balancing partitioning scheme, we see this: The colored bands represent each processing core.  You can see that, when we started (at the top), we begin with very small bands of color.  As the routine progresses through the Parallel.ForEach, the chunks get larger and larger (seen by larger and larger stripes). Most of the time, this is fantastic behavior, and most likely will out perform any custom written partitioning.  However, if your routine is not scaling well, it may be due to a failure in the default partitioning to handle your specific case.  With prior knowledge about your work, it may be possible to partition data more meaningfully than the default Partitioner. There is the option to use an overload of Parallel.ForEach which takes a Partitioner<T> instance.  The Partitioner<T> class is an abstract class which allows for both static and dynamic partitioning.  By overriding Partitioner<T>.SupportsDynamicPartitions, you can specify whether a dynamic approach is available.  If not, your custom Partitioner<T> subclass would override GetPartitions(int), which returns a list of IEnumerator<T> instances.  These are then used by the Parallel class to split work up amongst processors.  When dynamic partitioning is available, GetDynamicPartitions() is used, which returns an IEnumerable<T> for each partition.  If you do decide to implement your own Partitioner<T>, keep in mind the goals and tradeoffs of different partitioning strategies, and design appropriately. The Samples for Parallel Programming project includes a ChunkPartitioner class in the ParallelExtensionsExtras project.  This provides example code for implementing your own, custom allocation strategies, including a static allocator of a given chunk size.  Although implementing your own Partitioner<T> is possible, as I mentioned above, this is rarely required or useful in practice.  The default behavior of the TPL is very good, often better than any hand written partitioning strategy.

    Read the article

  • ASP.NET and WIF: Showing custom profile username as User.Identity.Name

    - by DigiMortal
    I am building ASP.NET MVC application that uses external services to authenticate users. For ASP.NET users are fully authenticated when they are redirected back from external service. In system they are logically authenticated when they have created user profiles. In this posting I will show you how to force ASP.NET MVC controller actions to demand existence of custom user profiles. Using external authentication sources with AppFabric Suppose you want to be user-friendly and you don’t force users to keep in mind another username/password when they visit your site. You can accept logins from different popular sites like Windows Live, Facebook, Yahoo, Google and many more. If user has account in some of these services then he or she can use his or her account to log in to your site. If you have community site then you usually have support for user profiles too. Some of these providers give you some information about users and other don’t. So only thing in common you get from all those providers is some unique ID that identifies user in service uniquely. Image above shows you how new user joins your site. Existing users who already have profile are directed to users homepage after they are authenticated. You can read more about how to solve semi-authorized users problem from my blog posting ASP.NET MVC: Using ProfileRequiredAttribute to restrict access to pages. The other problem is related to usernames that we don’t get from all identity providers. Why is IIdentity.Name sometimes empty? The problem is described more specifically in my blog posting Identifying AppFabric Access Control Service users uniquely. Shortly the problem is that not all providers have claim called http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name. The following diagram illustrates what happens when user got token from AppFabric ACS and was redirected to your site. Now, when user was authenticated using Windows Live ID then we don’t have name claim in token and that’s why User.Identity.Name is empty. Okay, we can force nameidentifier to be used as name (we can do it in web.config file) but we have user profiles and we want username from profile to be shown when username is asked. Modifying name claim Now let’s force IClaimsIdentity to use username from our user profiles. You can read more about my profiles topic from my blog posting ASP.NET MVC: Using ProfileRequiredAttribute to restrict access to pages and you can find some useful extension methods for claims identity from my blog posting Identifying AppFabric Access Control Service users uniquely. Here is what we do to set User.Identity.Name: we will check if user has profile, if user has profile we will check if User.Identity.Name matches the name given by profile, if names does not match then probably identity provider returned some name for user, we will remove name claim and recreate it with correct username, we will add new name claim to claims collection. All this stuff happens in Application_AuthorizeRequest event of our web application. The code is here. protected void Application_AuthorizeRequest() {     if (string.IsNullOrEmpty(User.Identity.Name))     {         var identity = User.Identity;         var profile = identity.GetProfile();         if (profile != null)         {             if (profile.UserName != identity.Name)             {                 identity.RemoveName();                   var claim = new Claim("http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name", profile.UserName);                 var claimsIdentity = (IClaimsIdentity)identity;                 claimsIdentity.Claims.Add(claim);             }         }     } } RemoveName extension method is simple – it looks for name claims of IClaimsIdentity claims collection and removes them. public static void RemoveName(this IIdentity identity) {     if (identity == null)         return;       var claimsIndentity = identity as ClaimsIdentity;     if (claimsIndentity == null)         return;       for (var i = claimsIndentity.Claims.Count - 1; i >= 0; i--)     {         var claim = claimsIndentity.Claims[i];         if (claim.ClaimType == "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name")             claimsIndentity.Claims.RemoveAt(i);     } } And we are done. Now User.Identity.Name returns the username from user profile and you can use it to show username of current user everywhere in your site. Conclusion Mixing AppFabric Access Control Service and Windows Identity Foundation with custom authorization logic is not impossible but a little bit tricky. This posting finishes my little series about AppFabric ACS and WIF for this time and hopefully you found some useful tricks, tips, hacks and code pieces you can use in your own applications.

    Read the article

  • Thursday Community Keynote: "By the Community, For the Community"

    - by Janice J. Heiss
    Sharat Chander, JavaOne Community Chairperson, began Thursday's Community Keynote. As part of the morning’s theme of "By the Community, For the Community," Chander noted that 60% of the material at the 2012 JavaOne conference was presented by Java Community members. "So next year, when the call for papers starts, put-in your submissions," he urged.From there, Gary Frost, Principal Member of Technical Staff, AMD, expanded upon Sunday's Strategy Keynote exploration of Project Sumatra, an OpenJDK project targeted at bringing Java to heterogeneous computing platforms (which combine the CPU and the parallel processor of the GPU into a single piece of silicon). Sumatra entails enhancing the JVM to make maximum use of these advanced platforms. Within this development space, AMD created the Aparapi API, which converts Java bytecode into OpenCL for execution on such GPU devices. The Aparapi API was open sourced in September 2011.Whether it was zooming-in on a Mandelbrot set, "the game of life," or a swarm of 10,000 Dukes in a space-bound gravitational dance, Frost's demos, using an Aparapi/OpenCL implementation, produced stunningly faster display results. He indicated that the Java 9 timeframe is where they see Project Sumatra coming to ultimate fruition, employing the Lamdas of Java 8.Returning to the theme of the keynote, Donald Smith, Director, Java Product Management, Oracle, explored a mind map graphic demonstrating the importance of Community in terms of fostering innovation. "It's the sharing and mixing of culture, the diversity, and the rapid prototyping," he said. Within this topic, Smith, brought up a panel of representatives from Cloudera, Eclipse, Eucalyptus, Perrone Robotics, and Twitter--ideal manifestations of community and innovation in the world of Java.Marten Mickos, CEO, Eucalyptus Systems, explored his company's open source cloud software platform, written in Java, and used by gaming companies, technology companies, media companies, and more. Chris Aniszczyk, Operations Engineering,Twitter, noted the importance of the JVM in terms of their multiple-language development environment. Mike Olson, CEO, Cloudera, described his company's Apache Hadoop-based software, support, and training. Mike Milinkovich, Executive Director, Eclipse Foundation, noted that they have about 270 tools projects at Eclipse, with 267 of them written in Java. Milinkovich added that Eclipse will even be going into space in 2013, as part of the control software on various experiments aboard the International Space Station. Lastly, Paul Perrone, CEO, Perrone Robotics, detailed his company's robotics and automation software platform built 100% on Java, including Java SE and Java ME--"on rat, to cat, to elephant-sized systems." Milinkovic noted that communities are by nature so good at innovation because of their very openness--"The more open you make your innovation process, the more ideas are challenged, and the more developers are focused on justifying their choices all the way through the process."From there, Georges Saab, VP Development Java SE OpenJDK, continued the topic of innovation and helping the Java Community to "Make the Future Java." Martijn Verburg, representing the London Java Community (winner of a Duke's Choice Award 2012 for their activity in OpenJDK and JCP), soon joined Saab onstage. Verburg detailed the LJC's "Adopt a JSR" program--"to get day-to-day developers more involved in the innovation that's happening around them."  From its London launching pad, the innovative program has spread to Brazil, Morocco, Latvia, India, and more.Other active participants in the program joined Verburg onstage--Ben Evans, London Java Community; James Gough, Stackthread; Bruno Souza, SOUJava; Richard Warburton, jClarity; and Cecelia Borg, Oracle--OpenJDK Onboarding. Together, the group explored the goals and tasks inherent in the Adopt a JSR program--from organizing hack days (testing prototype implementations), to managing mailing lists and forums, to triaging issues, to evangelism—all with the goal of fostering greater community/developer involvement, but equally importantly, building better open standards. “Come join us, and make your ecosystem better!" urged Verburg.Paul Perrone returned to profile the latest in his company's robotics work around Java--including the AARDBOTS family of smaller robotic vehicles, running the Perrone MAX platform on top of the Java JVM. Perrone took his "Rumbles" four-wheeled robot out for a spin onstage--a roaming, ARM-based security-bot vehicle, complete with IR, ultrasonic, and "cliff" sensors (the latter, for the raised stage at JavaOne). As an ultimate window into the future of robotics, Perrone displayed a "head-set" controller--a sensor directed at the forehead to monitor brainwaves, for the someday-implementation of brain-to-robot control.Then, just when it seemed this might be the end of the day's futuristic offerings, a mystery voice from offstage pronounced "I've got some toys"--proving to be guest-visitor James Gosling, there to explore his cutting-edge work with Liquid Robotics. While most think of robots as something with wheels or arms or lasers, Gosling explained, the Liquid Robotics vehicle is an entirely new and innovative ocean-going 'bot. Looking like a floating surfboard, with an attached set of underwater wings, the autonomous devices roam the oceans using only the energy of ocean waves to propel them, and a single actuated rudder to steer. "We have to accomplish all guidance just by wiggling the rudder," Gosling said. The devices offer applications from self-installing weather buoy, to pollution monitoring station, to marine mammal monitoring device, to climate change data gathering, to even ocean life genomic sampling. The early versions of the vehicle used C code on very tiny industrial micro controllers, where they had to "count the bytes one at a time."  But the latest generation vehicles, which just hit the water a week or so ago, employ an ARM processor running Linux and the ARM version of JDK 7. Gosling explained that vehicle communication from remote locations is achieved via the Iridium satellite network. But because of the costs of this communication path, the data must be sent in very small bursts--using SBD short burst data. "It costs $1/kb, so that rules everything in the software design,” said Gosling. “If you were trying to stream a Netflix video over this, it would cost a million dollars a movie. …We don't have a 'big data' problem," he quipped. There are currently about 150 Liquid Robotics vehicles out traversing the oceans. Gosling demonstrated real time satellite tracking of several vehicles currently at sea, noting that Java is actually particularly good at AI applications--due to the language having garbage collection, which facilitates complex data structures. To close-out his time onstage, Gosling of course participated in the ceremonial Java tee-shirt toss out to the audience…In parting, Chander passed the JavaOne Community Chairperson baton to Stephen Chin, Java Technology Evangelist, Oracle. Onstage in full motorcycle gear, Chin noted that he'll soon be touring Europe by motorcycle, meeting Java Community Members and streaming live via UStream--the ultimate manifestation of community and technology!  He also reminded attendees of the upcoming JavaOne Latin America 2012, São Paulo, Brazil (December 4-6, 2012), and stated that the CFP (call for papers) at the conference has been extended for one more week. "Remember, December is summer in Brazil!" Chin said.

    Read the article

  • Session memory – who’s this guy named Max and what’s he doing with my memory?

    - by extended_events
    SQL Server MVP Jonathan Kehayias (blog) emailed me a question last week when he noticed that the total memory used by the buffers for an event session was larger than the value he specified for the MAX_MEMORY option in the CREATE EVENT SESSION DDL. The answer here seems like an excellent subject for me to kick-off my new “401 – Internals” tag that identifies posts where I pull back the curtains a bit and let you peek into what’s going on inside the extended events engine. In a previous post (Option Trading: Getting the most out of the event session options) I explained that we use a set of buffers to store the event data before  we write the event data to asynchronous targets. The MAX_MEMORY along with the MEMORY_PARTITION_MODE defines how big each buffer will be. Theoretically, that means that I can predict the size of each buffer using the following formula: max memory / # of buffers = buffer size If it was that simple I wouldn’t be writing this post. I’ll take “boundary” for 64K Alex For a number of reasons that are beyond the scope of this blog, we create event buffers in 64K chunks. The result of this is that the buffer size indicated by the formula above is rounded up to the next 64K boundary and that is the size used to create the buffers. If you think visually, this means that the graph of your max_memory option compared to the actual buffer size that results will look like a set of stairs rather than a smooth line. You can see this behavior by looking at the output of dm_xe_sessions, specifically the fields related to the buffer sizes, over a range of different memory inputs: Note: This test was run on a 2 core machine using per_cpu partitioning which results in 5 buffers. (Seem my previous post referenced above for the math behind buffer count.) input_memory_kb total_regular_buffers regular_buffer_size total_buffer_size 637 5 130867 654335 638 5 130867 654335 639 5 130867 654335 640 5 196403 982015 641 5 196403 982015 642 5 196403 982015 This is just a segment of the results that shows one of the “jumps” between the buffer boundary at 639 KB and 640 KB. You can verify the size boundary by doing the math on the regular_buffer_size field, which is returned in bytes: 196403 – 130867 = 65536 bytes 65536 / 1024 = 64 KB The relationship between the input for max_memory and when the regular_buffer_size is going to jump from one 64K boundary to the next is going to change based on the number of buffers being created. The number of buffers is dependent on the partition mode you choose. If you choose any partition mode other than NONE, the number of buffers will depend on your hardware configuration. (Again, see the earlier post referenced above.) With the default partition mode of none, you always get three buffers, regardless of machine configuration, so I generated a “range table” for max_memory settings between 1 KB and 4096 KB as an example. start_memory_range_kb end_memory_range_kb total_regular_buffers regular_buffer_size total_buffer_size 1 191 NULL NULL NULL 192 383 3 130867 392601 384 575 3 196403 589209 576 767 3 261939 785817 768 959 3 327475 982425 960 1151 3 393011 1179033 1152 1343 3 458547 1375641 1344 1535 3 524083 1572249 1536 1727 3 589619 1768857 1728 1919 3 655155 1965465 1920 2111 3 720691 2162073 2112 2303 3 786227 2358681 2304 2495 3 851763 2555289 2496 2687 3 917299 2751897 2688 2879 3 982835 2948505 2880 3071 3 1048371 3145113 3072 3263 3 1113907 3341721 3264 3455 3 1179443 3538329 3456 3647 3 1244979 3734937 3648 3839 3 1310515 3931545 3840 4031 3 1376051 4128153 4032 4096 3 1441587 4324761 As you can see, there are 21 “steps” within this range and max_memory values below 192 KB fall below the 64K per buffer limit so they generate an error when you attempt to specify them. Max approximates True as memory approaches 64K The upshot of this is that the max_memory option does not imply a contract for the maximum memory that will be used for the session buffers (Those of you who read Take it to the Max (and beyond) know that max_memory is really only referring to the event session buffer memory.) but is more of an estimate of total buffer size to the nearest higher multiple of 64K times the number of buffers you have. The maximum delta between your initial max_memory setting and the true total buffer size occurs right after you break through a 64K boundary, for example if you set max_memory = 576 KB (see the green line in the table), your actual buffer size will be closer to 767 KB in a non-partitioned event session. You get “stepped up” for every 191 KB block of initial max_memory which isn’t likely to cause a problem for most machines. Things get more interesting when you consider a partitioned event session on a computer that has a large number of logical CPUs or NUMA nodes. Since each buffer gets “stepped up” when you break a boundary, the delta can get much larger because it’s multiplied by the number of buffers. For example, a machine with 64 logical CPUs will have 160 buffers using per_cpu partitioning or if you have 8 NUMA nodes configured on that machine you would have 24 buffers when using per_node. If you’ve just broken through a 64K boundary and get “stepped up” to the next buffer size you’ll end up with total buffer size approximately 10240 KB and 1536 KB respectively (64K * # of buffers) larger than max_memory value you might think you’re getting. Using per_cpu partitioning on large machine has the most impact because of the large number of buffers created. If the amount of memory being used by your system within these ranges is important to you then this is something worth paying attention to and considering when you configure your event sessions. The DMV dm_xe_sessions is the tool to use to identify the exact buffer size for your sessions. In addition to the regular buffers (read: event session buffers) you’ll also see the details for large buffers if you have configured MAX_EVENT_SIZE. The “buffer steps” for any given hardware configuration should be static within each partition mode so if you want to have a handy reference available when you configure your event sessions you can use the following code to generate a range table similar to the one above that is applicable for your specific machine and chosen partition mode. DECLARE @buf_size_output table (input_memory_kb bigint, total_regular_buffers bigint, regular_buffer_size bigint, total_buffer_size bigint) DECLARE @buf_size int, @part_mode varchar(8) SET @buf_size = 1 -- Set to the begining of your max_memory range (KB) SET @part_mode = 'per_cpu' -- Set to the partition mode for the table you want to generate WHILE @buf_size <= 4096 -- Set to the end of your max_memory range (KB) BEGIN     BEGIN TRY         IF EXISTS (SELECT * from sys.server_event_sessions WHERE name = 'buffer_size_test')             DROP EVENT SESSION buffer_size_test ON SERVER         DECLARE @session nvarchar(max)         SET @session = 'create event session buffer_size_test on server                         add event sql_statement_completed                         add target ring_buffer                         with (max_memory = ' + CAST(@buf_size as nvarchar(4)) + ' KB, memory_partition_mode = ' + @part_mode + ')'         EXEC sp_executesql @session         SET @session = 'alter event session buffer_size_test on server                         state = start'         EXEC sp_executesql @session         INSERT @buf_size_output (input_memory_kb, total_regular_buffers, regular_buffer_size, total_buffer_size)             SELECT @buf_size, total_regular_buffers, regular_buffer_size, total_buffer_size FROM sys.dm_xe_sessions WHERE name = 'buffer_size_test'     END TRY     BEGIN CATCH         INSERT @buf_size_output (input_memory_kb)             SELECT @buf_size     END CATCH     SET @buf_size = @buf_size + 1 END DROP EVENT SESSION buffer_size_test ON SERVER SELECT MIN(input_memory_kb) start_memory_range_kb, MAX(input_memory_kb) end_memory_range_kb, total_regular_buffers, regular_buffer_size, total_buffer_size from @buf_size_output group by total_regular_buffers, regular_buffer_size, total_buffer_size Thanks to Jonathan for an interesting question and a chance to explore some of the details of Extended Event internals. - Mike

    Read the article

  • Interesting articles and blogs on SPARC T4

    - by mv
    Interesting articles and blogs on SPARC T4 processor   I have consolidated all the interesting information I could get on SPARC T4 processor and its hardware cryptographic capabilities.  Hope its useful. 1. Advantages of SPARC T4 processor  Most important points in this T4 announcement are : "The SPARC T4 processor was designed from the ground up for high speed security and has a cryptographic stream processing unit (SPU) integrated directly into each processor core. These accelerators support 16 industry standard security ciphers and enable high speed encryption at rates 3 to 5 times that of competing processors. By integrating encryption capabilities directly inside the instruction pipeline, the SPARC T4 processor eliminates the performance and cost barriers typically associated with secure computing and makes it possible to deliver high security levels without impacting the user experience." Data Sheet has more details on these  : "New on-chip Encryption Instruction Accelerators with direct non-privileged support for 16 industry-standard cryptographic algorithms plus random number generation in each of the eight cores: AES, Camellia, CRC32c, DES, 3DES, DH, DSA, ECC, Kasumi, MD5, RSA, SHA-1, SHA-224, SHA-256, SHA-384, SHA-512" I ran "isainfo -v" command on Solaris 11 Sparc T4-1 system. It shows the new instructions as expected  : $ isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc 32-bit sparc applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc v8plus div32 mul32  2.  Dan Anderson's Blog have some interesting points about how these can be used : "New T4 crypto instructions include: aes_kexpand0, aes_kexpand1, aes_kexpand2,         aes_eround01, aes_eround23, aes_eround01_l, aes_eround_23_l, aes_dround01, aes_dround23, aes_dround01_l, aes_dround_23_l.       Having SPARC T4 hardware crypto instructions is all well and good, but how do we access it ?      The software is available with Solaris 11 and is used automatically if you are running Solaris a SPARC T4.  It is used internally in the kernel through kernel crypto modules.  It is available in user space through the PKCS#11 library." 3.   Dans' Blog on Where's the Crypto Libraries? Although this was written in 2009 but still is very useful  "Here's a brief tour of the major crypto libraries shown in the digraph:   The libpkcs11 library contains the PKCS#11 API (C_\*() functions, such as C_Initialize()). That in turn calls library pkcs11_softtoken or pkcs11_kernel, for userland or kernel crypto providers. The latter is used mostly for hardware-assisted cryptography (such as n2cp for Niagara2 SPARC processors), as that is performed more efficiently in kernel space with the "kCF" module (Kernel Crypto Framework). Additionally, for Solaris 10, strong crypto algorithms were split off in separate libraries, pkcs11_softtoken_extra libcryptoutil contains low-level utility functions to help implement cryptography. libsoftcrypto (OpenSolaris and Solaris Nevada only) implements several symmetric-key crypto algorithms in software, such as AES, RC4, and DES3, and the bignum library (used for RSA). libmd implements MD5, SHA, and SHA2 message digest algorithms" 4. Difference in T3 and T4 Diagram in this blog is good and self explanatory. Jeff's blog also highlights the differences  "The T4 servers have improved crypto acceleration, described at https://blogs.oracle.com/DanX/entry/sparc_t4_openssl_engine. It is "just built in" so administrators no longer have to assign crypto accelerator units to domains - it "just happens". Every physical or virtual CPU on a SPARC-T4 has full access to hardware based crypto acceleration at all times. .... For completeness sake, it's worth noting that the T4 adds more crypto algorithms, and accelerates Camelia, CRC32c, and more SHA-x." 5. About performance counters In this blog, performance counters are explained : "Note that unlike T3 and before, T4 crypto doesn't require kernel modules like ncp or n2cp, there is no visibility of crypto hardware with kstats or cryptoadm. T4 does provide hardware counters for crypto operations.  You can see these using cpustat: cpustat -c pic0=Instr_FGU_crypto 5 You can check the general crypto support of the hardware and OS with the command "isainfo -v". Since T4 crypto's implementation now allows direct userland access, there are no "crypto units" visible to cryptoadm.  " For more details refer Martin's blog as well. 6. How to turn off  SPARC T4 or Intel AES-NI crypto acceleration  I found this interesting blog from Darren about how to turn off  SPARC T4 or Intel AES-NI crypto acceleration. "One of the new Solaris 11 features of the linker/loader is the ability to have a single ELF object that has multiple different implementations of the same functions that are selected at runtime based on the capabilities of the machine.   The alternate to this is having the application coded to call getisax(2) system call and make the choice itself.  We use this functionality of the linker/loader when we build the userland libraries for the Solaris Cryptographic Framework (specifically libmd.so and libsoftcrypto.so) The Solaris linker/loader allows control of a lot of its functionality via environment variables, we can use that to control the version of the cryptographic functions we run.  To do this we simply export the LD_HWCAP environment variable with values that tell ld.so.1 to not select the HWCAP section matching certain features even if isainfo says they are present.  This will work for consumers of the Solaris Cryptographic Framework that use the Solaris PKCS#11 libraries or use libmd.so interfaces directly.  For SPARC T4 : export LD_HWCAP="-aes -des -md5 -sha256 -sha512 -mont -mpul" .. For Intel systems with AES-NI support: export LD_HWCAP="-aes"" Note that LD_HWCAP is explained in  http://docs.oracle.com/cd/E23823_01/html/816-5165/ld.so.1-1.html "LD_HWCAP, LD_HWCAP_32, and LD_HWCAP_64 -  Identifies an alternative hardware capabilities value... A “-” prefix results in the capabilities that follow being removed from the alternative capabilities." 7. Whitepaper on SPARC T4 Servers—Optimized for End-to-End Data Center Computing This Whitepaper on SPARC T4 Servers—Optimized for End-to-End Data Center Computing explains more details.  It has DTrace scripts which may come in handy : "To ensure the hardware-assisted cryptographic acceleration is configured to use and working with the security scenarios, it is recommended to use the following Solaris DTrace script. #!/usr/sbin/dtrace -s pid$1:libsoftcrypto:yf*:entry, pid$target:libsoftcrypto:rsa*:entry, pid$1:libmd:yf*:entry { @[probefunc] = count(); } tick-1sec { printa(@ops); trunc(@ops); }" Note that I have slightly modified the D Script to have RSA "libsoftcrypto:rsa*:entry" as well as per recommendations from Chi-Chang Lin. 8. References http://www.oracle.com/us/corporate/features/sparc-t4-announcement-494846.html http://www.oracle.com/us/products/servers-storage/servers/sparc-enterprise/t-series/sparc-t4-1-ds-487858.pdf https://blogs.oracle.com/DanX/entry/sparc_t4_openssl_engine https://blogs.oracle.com/DanX/entry/where_s_the_crypto_libraries https://blogs.oracle.com/darren/entry/howto_turn_off_sparc_t4 http://docs.oracle.com/cd/E23823_01/html/816-5165/ld.so.1-1.html   https://blogs.oracle.com/hardware/entry/unleash_the_power_of_cryptography https://blogs.oracle.com/cmt/entry/t4_crypto_cheat_sheet https://blogs.oracle.com/martinm/entry/t4_performance_counters_explained  https://blogs.oracle.com/jsavit/entry/no_mau_required_on_a http://www.oracle.com/us/products/servers-storage/servers/sparc-enterprise/t-series/sparc-t4-business-wp-524472.pdf

    Read the article

  • ASP.NET Controls – CommunityServer Captcha ControlAdapter, a practical case

    - by nmgomes
    The ControlAdapter is available since .NET framework version 2.0 and his main goal is to adapt and customize a control render in order to achieve a specific behavior or layout. This customization is done without changing the base control. A ControlAdapter is commonly used to custom render for specific platforms like Mobile. In this particular case the ControlAdapter was used to add a specific behavior to a Control. In this  post I will use one adapter to add a Captcha to all WeblogPostCommentForm controls within pontonetpt.com CommunityServer instance. The Challenge The ControlAdapter complexity is usually associated with the complexity/structure of is base control. This case is precisely one of those since base control dynamically load his content (controls) thru several ITemplate. Those of you who already played with ITemplate knows that while it is an excellent option for control composition it also brings to the table a big issue: “Controls defined within a template are not available for manipulation until they are instantiated inside another control.” While analyzing the WeblogPostCommentForm control I found that he uses the ITemplate technique to compose it’s layout and unfortunately I also found that the template content vary from theme to theme. This could have been a problem but luckily WeblogPostCommentForm control template content always contains a submit button with a well known ID (at least I can assume that there are a well known set of IDs). Using this submit button as anchor it’s possible to add the Captcha controls in the correct place. Another important finding was that WeblogPostCommentForm control inherits from the WrappedFormBase control which is the base control for all CommunityServer input forms. Knowing this inheritance link the main goal has changed to became the creation of a base ControlAdapter that  could be extended and customized to allow adding Captcha to: post comments form contact form user creation form. And, with this mind set, I decided to used the following ControlAdapter base class signature :public abstract class WrappedFormBaseCaptchaAdapter<T> : ControlAdapter where T : WrappedFormBase { }Great, but there are still many to do … Captcha The Captcha will be assembled with: A dynamically generated image with a set of random numbers A TextBox control where the image number will be inserted A Validator control to validate whether TextBox numbers match the image numbers This is a common Captcha implementation, is not rocket science and don’t bring any additional problem. The main problem, as told before, is to find the correct anchor control to ensure a correct Captcha control injection. The anchor control can vary by: target control  theme Implementation To support this dynamic scenario I choose to use the following implementation:private List<string> _validAnchorIds = null; protected virtual List<string> ValidAnchorIds { get { if (this._validAnchorIds == null) { this._validAnchorIds = new List<string>(); this._validAnchorIds.Add("btnSubmit"); } return this._validAnchorIds; } } private Control GetAnchorControl(T wrapper) { if (this.ValidAnchorIds == null || this.ValidAnchorIds.Count == 0) { throw new ArgumentException("Cannot be null or empty", "validAnchorNames"); } var q = from anchorId in this.ValidAnchorIds let anchorControl = CSControlUtility.Instance().FindControl(wrapper, anchorId) where anchorControl != null select anchorControl; return q.FirstOrDefault(); } I can now, using the ValidAnchorIds property, configure a set of valid anchor control  Ids. The GetAnchorControl method searches for a valid anchor control within the set of valid control Ids. Here, some of you may question why to use a LINQ To Objects expression, but the important here is to notice the usage of CSControlUtility.Instance().FindControl CommunityServer method. I want to build on top of CommunityServer not to reinvent the wheel. Assuming that an anchor control was found, it’s now possible to inject the Captcha at the correct place. This not something new, we do this all the time when creating server controls or adding dynamic controls:protected sealed override void CreateChildControls() { base.CreateChildControls(); if (this.IsCaptchaRequired) { T wrapper = base.Control as T; if (wrapper != null) { Control anchorControl = GetAnchorControl(wrapper); if (anchorControl != null) { Panel phCaptcha = new Panel {CssClass = "CommonFormField", ID = "Captcha"}; int index = anchorControl.Parent.Controls.IndexOf(anchorControl); anchorControl.Parent.Controls.AddAt(index, phCaptcha); CaptchaConfiguration.DefaultProvider.AddCaptchaControls( phCaptcha, GetValidationGroup(wrapper, anchorControl)); } } } } Here you can see a new entity in action: a provider. This is a CaptchaProvider class instance and is only goal is to create the Captcha itself and do everything else is needed to ensure is correct operation.public abstract class CaptchaProvider : ProviderBase { public abstract void AddCaptchaControls(Panel captchaPanel, string validationGroup); } You can create your own specific CaptchaProvider class to use different Captcha strategies including the use of existing Captcha services  like ReCaptcha. Once the generic ControlAdapter was created became extremely easy to created a specific one. Here is the specific ControlAdapter for the WeblogPostCommentForm control:public class WeblogPostCommentFormCaptchaAdapter : WrappedFormBaseCaptchaAdapter<WrappedFormBase> { #region Overriden Methods protected override List<string> ValidAnchorIds { get { List<string> validAnchorNames = base.ValidAnchorIds; validAnchorNames.Add("CommentSubmit"); return validAnchorNames; } } protected override string DefaultValidationGroup { get { return "CreateCommentForm"; } } #endregion Overriden Methods } Configuration This is the magic step. Without changing the original pages and keeping the application original assemblies untouched we are going to add a new behavior to the CommunityServer application. To glue everything together you must follow this steps: Add the following configuration to default.browser file:<?xml version='1.0' encoding='utf-8'?> <browsers> <browser refID="Default"> <controlAdapters> <!-- Adapter for the WeblogPostCommentForm control in order to add the Captcha and prevent SPAM comments --> <adapter controlType="CommunityServer.Blogs.Controls.WeblogPostCommentForm" adapterType="NunoGomes.CommunityServer.Components.WeblogPostCommentFormCaptchaAdapter, NunoGomes.CommunityServer" /> </controlAdapters> </browser> </browsers> Add the following configuration to web.config file:<configuration> <configSections> <!-- New section for Captcha providers configuration --> <section name="communityServer.Captcha" type="NunoGomes.CommunityServer.Captcha.Configuration.CaptchaSection" /> </configSections> <!-- Configuring a simple Captcha provider --> <communityServer.Captcha defaultProvider="simpleCaptcha"> <providers> <add name="simpleCaptcha" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProvider, NunoGomes.CommunityServer" imageUrl="~/captcha.ashx" enabled="true" passPhrase="_YourPassPhrase_" saltValue="_YourSaltValue_" hashAlgorithm="SHA1" passwordIterations="3" keySize="256" initVector="_YourInitVectorWithExactly_16_Bytes_" /> </providers> </communityServer.Captcha> <system.web> <httpHandlers> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </httpHandlers> </system.web> <system.webServer> <handlers accessPolicy="Read, Write, Script, Execute"> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" name="captcha" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </handlers> </system.webServer> </configuration> Conclusion Building a ControlAdapter can be complex but the reward is his ability to allows us, thru configuration changes, to modify an application render and/or behavior. You can see this ControlAdapter in action here and here (anonymous required). A complete solution is available in “CommunityServer Extensions” Codeplex project.

    Read the article

  • South Florida Code Camp 2010 &ndash; VI &ndash; 2010-02-27

    - by Dave Noderer
    Catching up after our sixth code camp here in the Ft Lauderdale, FL area. Website at: http://www.fladotnet.com/codecamp. For the 5th time, DeVry University hosted the event which makes everything else really easy! Statistics from 2010 South Florida Code Camp: 848 registered (we use Microsoft Group Events) ~ 600 attended (516 took name badges) 64 speakers (including speaker idol) 72 sessions 12 parallel tracks Food 400 waters 600 sodas 900 cups of coffee (it was cold!) 200 pounds of ice 200 pizza's 10 large salad trays 900 mouse pads Photos on facebook Dave Noderer: http://www.facebook.com/home.php#!/album.php?aid=190812&id=693530361 Joe Healy: http://www.facebook.com/devfish?ref=mf#!/album.php?aid=202787&id=720054950 Will Strohl:http://www.facebook.com/home.php#!/album.php?aid=2045553&id=1046966128&ref=mf Veronica Gonzalez: http://www.facebook.com/home.php#!/album.php?aid=150954&id=672439484 Florida Speaker Idol One of the sessions at code camp was the South Florida Regional speaker idol competition. After user group level competitions there are five competitors. I acted as MC and score keeper while Ed Hill, Bob O’Connell, John Dunagan and Shervin Shakibi were judges. This statewide competition is being run by Roy Lawsen in Lakeland and the winner, Jeff Truman from Naples will move on to the state finals to be held at the Orlando Code Camp on 3/27/2010: http://www.orlandocodecamp.com/. Each speaker has 10 minutes. The participants were: Alex Koval Jeff Truman Jared Nielsen Chris Catto Venkat Narayanasamy They all did a great job and I’m working with each to make sure they don’t stop there and start speaking at meetings. Thanks to everyone involved! Volunteers As always events like this don’t happen without a lot of help! The key people were: Ed Hill, Bob O’Connell – DeVry For the months leading up to the event, Ed collects all of the swag, books, etc and stores them. He holds meeting with various DeVry departments to coordinate the day, he works with the students in the days  before code camp to stuff bags, print signs, arrange tables and visit BJ’s for our supplies (I go and pay but have a small car!). And of course the day of the event he is there at 5:30 am!! We took two SUV’s to BJ’s, i was really worried that the 36 cases of water were going to break his rear axle! He also helps with the students and works very hard before and after the event. Rainer Haberman – Speakers and Volunteer of the Year Rainer has helped over the past couple of years but this time he took full control of arranging the tracks. I did some preliminary work solicitation speakers but he took over all communications after that. We have tried various organizations around speakers, chair per track, central team but having someone paying attention to the details is definitely the way to go! This was the first year I did not have to jump in at the last minute and re-arrange everything. There were lots of kudo’s from the speakers too saying they felt it was more organized than they have experienced in the past from any code camp. Thanks Rainer! Ray Alamonte – Book Swap We saw the idea of a book swap from the Alabama Code Camp and thought we would give it a try. Ray jumped in and took control. The idea was to get people to bring their old technical books to swap or for others to buy. You got a ticket for each book you brought that you could then turn in to buy another book. If you did not have a ticket you could buy a book for $1. Net proceeds were $153 which I rounded up and donated to the Red Cross. There is plenty going on in Haiti and Chile! I don’t think we really got a count of how many books came in. I many cases the books barely hit the table before being picked up again. At the end we were left with a dozen books which we donated to the DeVry library. A great success we will definitely do again! Jace Weiss / Ratchelen Hut – Coffee and Snacks Wow, this was an eye opener. In past years a few of us would struggle to give some attention to coffee, snacks, etc. But it was always tenuous and always ended up running out of coffee. In the past we have tried buying Dunkin Donuts coffee, renting urns, borrowing urns, etc. This year I actually purchased 2 – 100 cup Westbend commercial brewers plus a couple of small urns (30 and 60 cup we used for decaf). We got them both started early (although i forgot to push the on button on one!) and primed it with 10 boxes of Joe from Dunkin. then Jace and Rachelen took over.. once a batch was brewed they would refill the boxes, keep the area clean and at one point were filling cups. We never ran out of coffee and served a few hundred more than last  year. We did look but next year I’ll get a large insulated (like gatorade) dispensing container. It all went very smoothly and having help focused on that one area was a big win. Thanks Jace and Rachelen! Ken & Shirley Golding / Roberta Barbosa – Registration Ken & Shirley showed up and took over registration. This year we printed small name tags for everyone registered which was great because it is much easier to remember someone’s name when they are labeled! In any case it went the smoothest it has ever gone. All three were actively pulling people through the registration, answering questions, directing them to bags and information very quickly. I did not see that there was too big a line at any time. Thanks!! Scott Katarincic / Vishal Shukla – Website For the 3rd?? year in a row, Scott was in charge of the website starting in August or September when I start on code camp. He handles all the requests, makes changes to the site and admin. I think two years ago he wrote all the backend administration and tunes it and the website a bit but things are pretty stable. The only thing I do is put up the sponsors. It is a big pressure off of me!! Thanks Scott! Vishal jumped into the web end this year and created a new Silverlight agenda page to replace the old ajax page. We will continue to enhance this but it is definitely a good step forward! Thanks! Alex Funkhouser – T-shirts/Mouse pads/tables/sponsors Alex helps in many areas. He helps me bring in sponsors and handles all the logistics for t-shirts, sponsor tables and this year the mouse pads. He is also a key person to help promote the event as well not to mention the after after party which I did not attend and don’t want to know much about! Students There were a number of student volunteers but don’t have all of their names. But thanks to them, they stuffed bags, patrolled pizza and helped with moving things around. Sponsors We had a bunch of great sponsors which allowed us to feed people and give a way a lot of great swag. Our major sponsors of DeVry, Microsoft (both DPE and UGSS), Infragistics, Telerik, SQL Share (End to End, SQL Saturdays), and Interclick are very much appreciated. The other sponsors Applied Innovations (also supply code camp hosting), Ultimate Software (a great local SW company), Linxter (reliable cloud messaging we are lucky to have here!), Mediascend (a media startup), SoftwareFX (another local SW company we are happy to have back participating in CC), CozyRoc (if you do SSIS, check them out), Arrow Design (local DNN and Silverlight experts),Boxes and Arrows (a local SW consulting company) and Robert Half. One thing we did this year besides a t-shirt was a mouse pad. I like it because it will be around for a long time on many desks. After much investigation and years of using mouse pad’s I’ve determined that the 1/8” fabric top is the best and that is what we got!   So now I get a break for a few months before starting again!

    Read the article

  • The new workflow management of Oracle´s Hyperion Planning: Define more details with Planning Unit Hierarchies and Promotional Paths

    - by Alexandra Georgescu
    After having been almost unchanged for several years, starting with the 11.1.2 release of Oracle´s Hyperion Planning the Process Management has not only got a new name: “Approvals” now is offering the possibility to further split Planning Units (comprised of a unique Scenario-Version-Entity combination) into more detailed combinations along additional secondary dimensions, a so called Planning Unit Hierarchy, and also to pre-define a path of planners, reviewers and approvers, called Promotional Path. I´d like to introduce you to changes and enhancements in this new process management and arouse your curiosity for checking out more details on it. One reason of using the former process management in Planning was to limit data entry rights to one person at a time based on the assignment of a planning unit. So the lowest level of granularity for this assignment was, for a given Scenario-Version combination, the individual entity. Even if in many cases one person wasn´t responsible for all data being entered into that entity, but for only part of it, it was not possible to split the ownership along another additional dimension, for example by assigning ownership to different accounts at the same time. By defining a so called Planning Unit Hierarchy (PUH) in Approvals this gap is now closed. Complementing new Shared Services roles for Planning have been created in order to manage set up and use of Approvals: The Approvals Administrator consisting of the following roles: Approvals Ownership Assigner, who assigns owners and reviewers to planning units for which Write access is assigned (including Planner responsibilities). Approvals Supervisor, who stops and starts planning units and takes any action on planning units for which Write access is assigned. Approvals Process Designer, who can modify planning unit hierarchy secondary dimensions and entity members for which Write access is assigned, can also modify scenarios and versions that are assigned to planning unit hierarchies and can edit validation rules on data forms for which access is assigned. (this includes as well Planner and Ownership Assigner responsibilities) Set up of a Planning Unit Hierarchy is done under the Administration menu, by selecting Approvals, then Planning Unit Hierarchy. Here you create new PUH´s or edit existing ones. The following window displays: After providing a name and an optional description, a pre-selection of entities can be made for which the PUH will be defined. Available options are: All, which pre-selects all entities to be included for the definitions on the subsequent tabs None, manual entity selections will be made subsequently Custom, which offers the selection for an ancestor and the relative generations, that should be included for further definitions. Finally a pattern needs to be selected, which will determine the general flow of ownership: Free-form, uses the flow/assignment of ownerships according to Planning releases prior to 11.1.2 In Bottom-up, data input is done at the leaf member level. Ownership follows the hierarchy of approval along the entity dimension, including refinements using a secondary dimension in the PUH, amended by defined additional reviewers in the promotional path. Distributed, uses data input at the leaf level, while ownership starts at the top level and then is distributed down the organizational hierarchy (entities). After ownership reaches the lower levels, budgets are submitted back to the top through the approval process. Proceeding to the next step, now a secondary dimension and the respective members from that dimension might be selected, in order to create more detailed combinations underneath each entity. After selecting the Dimension and a Parent Member, the definition of a Relative Generation below this member assists in populating the field for Selected Members, while the Count column shows the number of selected members. For refining this list, you might click on the icon right beside the selected member field and use the check-boxes in the appearing list for deselecting members. -------------------------------------------------------------------------------------------------------- TIP: In order to reduce maintenance of the PUH due to changes in the dimensions included (members added, moved or removed) you should consider to dynamically link those dimensions in the PUH with the dimension hierarchies in the planning application. For secondary dimensions this is done using the check-boxes in the Auto Include column. For the primary dimension, the respective selection criteria is applied by right-clicking the name of an entity activated as planning unit, then selecting an item of the shown list of include or exclude options (children, descendants, etc.). Anyway in order to apply dimension changes impacting the PUH a synchronization must be run. If this is really necessary or not is shown on the first screen after selecting from the menu Administration, then Approvals, then Planning Unit Hierarchy: under Synchronized you find the statuses Yes, No or Locked, where the last one indicates, that another user is just changing or synchronizing the PUH. Select one of the not synchronized PUH´s (status No) and click the Synchronize option in order to execute. -------------------------------------------------------------------------------------------------------- In the next step owners and reviewers are assigned to the PUH. Using the icons with the magnifying glass right besides the columns for Owner and Reviewer the respective assignments can be made in the ordermthat you want them to review the planning unit. While it is possible to assign only one owner per entity or combination of entity+ member of the secondary dimension, the selection for reviewers might consist of more than one person. The complete Promotional Path, including the defined owners and reviewers for the entity parents, can be shown by clicking the icon. In addition optional users might be defined for being notified about promotions for a planning unit. -------------------------------------------------------------------------------------------------------- TIP: Reviewers cannot change data, but can only review data according to their data access permissions and reject or promote planning units. -------------------------------------------------------------------------------------------------------- In order to complete your PUH definitions click Finish - this saves the PUH and closes the window. As a final step, before starting the approvals process, you need to assign the PUH to the Scenario-Version combination for which it should be used. From the Administration menu select Approvals, then Scenario and Version Assignment. Expand the PUH in order to see already existing assignments. Under Actions click the add icon and select scenarios and versions to be assigned. If needed, click the remove icon in order to delete entries. After these steps, set up is completed for starting the approvals process. Start, stop and control of the approvals process is now done under the Tools menu, and then Manage Approvals. The new PUH feature is complemented by various additional settings and features; some of them at least should be mentioned here: Export/Import of PUHs: Out of Office agent: Validation Rules changing promotional/approval path if violated (including the use of User-defined Attributes (UDAs)): And various new and helpful reviewer actions with corresponding approval states. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis.

    Read the article

  • .NET 4.5 is an in-place replacement for .NET 4.0

    - by Rick Strahl
    With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Preserving Permalinks

    - by Daniel Moth
    One of the things that gets me on a rant is websites that break permalinks. If you have posted something somewhere and there is a public URL pointing to it, that URL should never ever return a 404. You are breaking all websites that ever linked to you and you are breaking all search engine links to your content (that others will try and follow). It is a pet peeve of mine. So when I had to move my blog, obviously I would preserve the root URL (www.danielmoth.com/Blog/), but I also wanted to preserve every URL my blog has generated over the years. To be clear, our focus here is on the URL formatting, not the content migration which I'll talk about in my next post. In this post, I'll describe my solution first and then what it solves. 1. The IIS7 Rewrite Module and web.config There are a few ways you can map an old URL to a new one (so when requests to the old URL come in, they get redirected to the new one). The new blog engine I use (dasBlog) has built-in functionality to do that (Scott refers to it here). Instead, the way I chose to address the issue was to use the IIS7 rewrite module. The IIS7 rewrite module allows redirecting URLs based on pattern matching, regular expressions and, of course, hardcoded full URLs for things that don't fall into any pattern. You can configure it visually from IIS Manager using a handy dialog that allows testing patterns against input URLs. Here is what mine looked like after configuring a few rules: To learn more about this technology check out this video, the reference page and this overview blog post; all 3 pages have a collection of related resources at the bottom worth checking out too. All the visual configuration ends up in a web.config file at the root folder of your website. If you are on a shared hosting service, probably the only way you can use the Rewrite Module is by directly editing the web.config file. Next, I'll describe the URLs I had to map and how that manifested itself in the web.config file. What I did was create the rules locally using the GUI, and then took the generated web.config file and uploaded it to my live site. You can view my web.config here. 2. Monthly Archives Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004_07_01_mothblog_archive.html dasBlog: /Blog/default,month,2004-07.aspx In my web.config file, the rule that deals with this is the one named "monthlyarchive_redirect". 3. Categories Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/labels/Personal.html dasBlog: /Blog/CategoryView,category,Personal.aspx In my web.config file the rule that deals with this is the one named "category_redirect". 4. Posts Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004/07/hello-world.html dasBlog: /Blog/Hello-World.aspx In my web.config file the rule that deals with this is the one named "post_redirect". Note: The decision is taken to use dasBlog URLs that do not include the date info (see the description of my Appearance settings). If we included the date info then it would have to include the day part, which blogger did not generate. This makes it impossible to redirect correctly and to have a single permalink for blog posts moving forward. An implication of this decision, is that no two blog posts can have the same title. The tool I will describe in my next post (inelegantly) deals with duplicates, but not with triplicates or higher. 5. Unhandled by a generic rule Unfortunately, the two blog engines use different rules for generating URLs for blog posts. Most of the time the conversion is as simple as the example of the previous section where a post titled "Hello World" generates a URL with the words separated by a hyphen. Some times that is not the case, for example: /Blog/2006/05/medc-wrap-up.html /Blog/MEDC-Wrapup.aspx or /Blog/2005/01/best-of-moth-2004.html /Blog/Best-Of-The-Moth-2004.aspx or /Blog/2004/11/more-windows-mobile-2005-details.html /Blog/More-Windows-Mobile-2005-Details-Emerge.aspx In short, blogger does not add words to the title beyond ~39 characters, it drops some words from the title generation (e.g. a, an, on, the), and it preserve hyphens that appear in the title. For this reason, we need to detect these and explicitly list them for redirects (no regular expression can help here because the full set of rules is not listed anywhere). In my web.config file the rule that deals with this is the one named "Redirect rule1 for FullRedirects" combined with the rewriteMap named "StaticRedirects". Note: The tool I describe in my next post will detect all the URLs that need to be explicitly redirected and will list them in a file ready for you to copy them to your web.config rewriteMap. 6. C# code doing the same as the web.config I wrote some naive code that does the same thing as the web.config: given a string it will return a new string converted according to the 3 rules above. It does not take into account the 4th case where an explicit hard-coded conversion is needed (the tool I present in the next post does take that into account). static string REGEX_post_redirect = "[0-9]{4}/[0-9]{2}/([0-9a-z-]+).html"; static string REGEX_category_redirect = "labels/([_0-9a-z-% ]+).html"; static string REGEX_monthlyarchive_redirect = "([0-9]{4})_([0-9]{2})_[0-9]{2}_mothblog_archive.html"; static string Redirect(string oldUrl) { GroupCollection g; if (RunRegExOnIt(oldUrl, REGEX_post_redirect, 2, out g)) return string.Concat(g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_category_redirect, 2, out g)) return string.Concat("CategoryView,category,", g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_monthlyarchive_redirect, 3, out g)) return string.Concat("default,month,", g[1].Value, "-", g[2], ".aspx"); return string.Empty; } static bool RunRegExOnIt(string toRegEx, string pattern, int groupCount, out GroupCollection g) { if (pattern.Length == 0) { g = null; return false; } g = new Regex(pattern, RegexOptions.IgnoreCase | RegexOptions.Compiled).Match(toRegEx).Groups; return (g.Count == groupCount); } Comments about this post welcome at the original blog.

    Read the article

  • Win a place at a SQL Server Masterclass with Kimberly Tripp and Paul Randal

    - by Testas
    The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!And you could be there courtesy of UK SQL Server User Group and SQL Server Magazine! This week the UK SQL Server User Group will provide you with details of how to win a place at this must see seminar   You can also register for the seminar yourself at:www.regonline.co.uk/kimtrippsql More information about the seminar   Where: Radisson Edwardian Heathrow Hotel, London When: Thursday 17th June 2010 This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance. The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:·         Debunk many of the ingrained misconceptions around SQL Server's behaviour   ·         Show you disaster recovery techniques critical to preserving your company's life-blood - the data   ·         Explain how a common application design pattern can wreak havoc in the database ·         Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Please Note: Agenda may be subject to changeSessions AbstractsKEYNOTE: Bridging the Gap Between Development and Production  Applications are commonly developed with little regard for how design choices will affect performance in production. This is often because developers don't realize the implications of their design on how SQL Server will be able to handle a high workload (e.g. blocking, fragmentation) and/or because there's no full-time trained DBA that can recognize production problems and help educate developers. The keynote sets the stage for the rest of the day. Discussing some of the issues that can arise, explaining how some can be avoided and highlighting some of the features in SQL 2008 that can help developers and DBAs make better use of SQL Server, and troubleshoot when things go wrong.  SESSION ONE: SQL Server MythbustersIt's amazing how many myths and misconceptions have sprung up and persisted over the years about SQL Server - after many years helping people out on forums, newsgroups, and customer engagements, Paul and Kimberly have heard it all. Are there really non-logged operations? Can interrupting shrinks or rebuilds cause corruption? Can you override the server's MAXDOP setting? Will the server always do a table-scan to get a row count? Many myths lead to poor design choices and inappropriate maintenance practices so these are just a few of many, many myths that Paul and Kimberly will debunk in this fast-paced session on how SQL Server operates and should be managed and maintained. SESSION TWO: Database Recovery Techniques Demo-Fest Even if a company has a disaster recovery strategy in place, they need to practice to make sure that the plan will work when a disaster does strike. In this fast-paced demo session Paul and Kimberly will repeatedly do nasty things to databases and then show how they are recovered - demonstrating many techniques that can be used in production for disaster recovery. Not for the faint-hearted! SESSION THREE: GUIDs: Use, Abuse, and How To Move Forward Since the addition of the GUID (Microsoft’s implementation of the UUID), my life as a consultant and "tuner" has been busy. I’ve seen databases designed with GUID keys run fairly well with small workloads but completely fall over and fail because they just cannot scale. And, I know why GUIDs are chosen - it simplifies the handling of parent/child rows in your batches so you can reduce round-trips or avoid dealing with identity values. And, yes, sometimes it's even for distributed databases and/or security that GUIDs are chosen. I'm not entirely against ever using a GUID but overusing and abusing GUIDs just has to be stopped! Please, please, please let me give you better solutions and explanations on how to deal with your parent/child rows, round-trips and clustering keys! SESSION 4: Essential Database MaintenanceIn this session, Paul and Kimberly will run you through their top-ten database maintenance recommendations, with a lot of tips and tricks along the way. These are distilled from almost 30 years combined experience working with SQL Server customers and are geared towards making your databases more performant, more available, and more easily managed (to save you time!). Everything in this session will be practical and applicable to a wide variety of databases. Topics covered include: backups, shrinks, fragmentation, statistics, and much more! Focus will be on 2005 but we'll explain some of the key differences for 2000 and 2008 as well.    Speaker Biographies     Paul S.Randal  Kimberley L. Tripp Paul and Kimberly are a husband-and-wife team who own and run SQLskills.com, a world-renowned SQL Server consulting and training company. They are both SQL Server MVPs and Microsoft Regional Directors, with over 30 years of combined experience on SQL Server. Paul worked on the SQL Server team for nine years in development and management roles, writing many of the DBCC commands, and ultimately with responsibility for core Storage Engine for SQL Server 2008. Paul writes extensively on his blog (SQLskills.com/blogs/Paul) and for TechNet Magazine, for which he is also a Contributing Editor. Kimberly worked on the SQL Server team in the early 1990s as a tester and writer before leaving to found SQLskills and embrace her passion for teaching and consulting. Kimberly has been a staple at worldwide conferences since she first presented at TechEd in 1996, and she blogs at SQLskills.com/blogs/Kimberly. They have written Microsoft whitepapers and books for SQL Server 2000, 2005 and 2008, and are regular, top-rated presenters worldwide on database maintenance, high availability, disaster recovery, performance tuning, and SQL Server internals. Together they teach the SQL MCM certification and throughout Microsoft.In their spare time, they like to find frogfish in remote corners of the world.  

    Read the article

  • WWDC and Tech Ed: A Tale of Two DevCons

    - by andrewbrust
    Next week marks the first full week of June.  Summer will feel in full swing and it will be a pretty big season for technology.  In seeming acknowledgement of that very fact, both Apple and Microsoft will be holding large developers conferences starting Monday.  Apple will hold its annual Worldwide Developers Conference (WWDC) in lovely San Francisco and Microsoft will hold its Tech Ed conference in muggy, oil-laden yet soulful New Orleans.  A brief survey of each show reveals much about the differences in each company’s offerings, strategy, and approach to customers and partners. In the interest of full disclosure, I must explain that I will be speaking at Microsoft’s Tech Ed show, and have done so, on and off, since 2003.  I have never been to an Apple conference and, as readers of this blog may know, I acquired my first ever Apple product 2 months ago when I bought an iPad on the day of that product’s launch.  I think I have keen insights into Microsoft’s conference.  My ability to comment on Apple’s event ranges somewhere between backseat driver and naive observer.  Just so you know. Although both shows cater to their respective company’s developers, there are a number of differences in the events’ purposes and content approaches.  First off, let’s consider each show as a news and PR vehicle.  WWDC will feature Steve Jobs’ keynote address and most likely will be where Apple officially reveals details of its 4th-generation iPhone. Jobs will likely also provide deep background information on the corresponding iPhone OS release.  These presumed announcements will make the show a magnet for the tech press and tech blogger elite.  Apple’s customers will be interested too, especially since the iPhone OS release will likely be made available to owners of existing iPhone, iPod Touch and iPad devices. Tech Ed, on the other hand, may not be especially newsworthy at all.  The keynote address will be given by Bob Muglia, who is President of the company’s Server and Tools Division, and he’ll likely be reviewing things more than previewing them. That’s because the company has, in the last 6-8 months, already released new versions of a majority of its products, including Windows, Office, SharePoint, SQL Server, Exchange, its Azure cloud platform, its .NET software development layer, its Silverlight Rich Internet Application (RIA) technology and its Visual Studio developer suite.  Redmond’s product pipeline has functioned more like a firehose of late, and the company has a ton of work to do to get developers up to speed on everything that’s new. I know I keep saying “developers,” but in Tech Ed’s case, that’s not really accurate.  In North America, Tech Ed caters to both developers and IT pros (i.e. technologists who work with physical IT infrastructure, as well as security and administration of the server software that runs on it).  This pairing has, since its inception, struck some as anomalous and others, including many exhibitors, as very smart. Certainly, it means Tech Ed ends up being a confab for virtually all professionals in Microsoft’s ecosystem.  And this year, Microsoft’s Business Intelligence (BI) conference will be co-located with Tech Ed, further enhancing that fusion effect. Clearly then, Microsoft’s show will focus on education, as its name assures us.  Apple’s will serve as both a press event and an opportunity to get its own App Store developer channel synced up with its newest technology advances.  For example, we already know that iPhone OS 4.0 will provide for a limited multitasking capability; that will only work well if people know how to code to it in a capable way.  Apple also told us its iAd advertising platform will be part of the new OS, and Steve Jobs insists that’s to provide a revenue opportunity for developers.  This too, then, needs to be explicated and soaked up buy the faithful. A look at each show’s breakout session lineup provides some interesting takeaways.  WWDC will have very few Mac-specific sessions on offer, and virtually no sessions that at are IT- or “Enterprise-“ related.  It’s all about the phone, music players and tablets.  However, WWDC will have plenty of low-level, hardcore tech coverage of such things as Advanced Memory Analysis and Creating Secure Applications, as well as lots of rich media-related content like Core Animation and Game Design and Development.  Beyond Apple’s proprietary platform, WWDC will also feature an array of sessions on HTML 5 and other Web standards.  In all, WWDC offers over 100 technical sessions and hands-on labs. What about Tech Ed’s editorial content?  Like the target audience, it really runs the gamut.  The show has 21 tracks (versus WWDC’s 5) and more than 745 “learning opportunities” which include breakout sessions, demo stations, hands-on labs and BIrds of a Feather discussion sessions.  Topics range from Architecture talks like Patterns of Parallel Programming to cloud computing talks like Building High Capacity Compute Applications with Windows Azure to IT-focused topics like Virtualization of Microsoft SharePoint 2010 Farm Architecture.  I also count 19 sessions on Windows Phone 7.  Unfortunately, with regard to Web standards and HTML 5, only a few sessions are offered, all of them specific to Internet Explorer. All-in-all, Apple’s show looks more exciting and “sexier” than Tech Ed. Microsoft’s show seems a lot more enterprise-focused than WWDC. This is, of course, well in sync with each company’s approach and products.  Microsoft’s content is much wider ranging and bests WWDC in sheer volume of sessions and labs.  I suppose some might argue that less is more; others that Apple’s consumer-focused offerings simply don’t provide for the same depth of coverage to a business audience.  Microsoft has a serious focus on the cloud and  a paucity of coverage on client-side Web standards; Apple has virtually no cloud offering at all.  Again, this reflects each tech titan’s go-to-market strategy. My own take is that employees of each company should attend the other’s event.  The amount of mutual exclusivity in content may make sense in terms of corporate philosophy, but the reality is that each company could stand to diversify into the other’s territory, at least somewhat. My own talk at Tech Ed will focus on competitive analysis around Microsoft’s BI products.  Apple does not today figure into that analysis. Maybe one day it will.

    Read the article

  • SQL SERVER – Introduction to SQL Server 2014 In-Memory OLTP

    - by Pinal Dave
    In SQL Server 2014 Microsoft has introduced a new database engine component called In-Memory OLTP aka project “Hekaton” which is fully integrated into the SQL Server Database Engine. It is optimized for OLTP workloads accessing memory resident data. In-memory OLTP helps us create memory optimized tables which in turn offer significant performance improvement for our typical OLTP workload. The main objective of memory optimized table is to ensure that highly transactional tables could live in memory and remain in memory forever without even losing out a single record. The most significant part is that it still supports majority of our Transact-SQL statement. Transact-SQL stored procedures can be compiled to machine code for further performance improvements on memory-optimized tables. This engine is designed to ensure higher concurrency and minimal blocking. In-Memory OLTP alleviates the issue of locking, using a new type of multi-version optimistic concurrency control. It also substantially reduces waiting for log writes by generating far less log data and needing fewer log writes. Points to remember Memory-optimized tables refer to tables using the new data structures and key words added as part of In-Memory OLTP. Disk-based tables refer to your normal tables which we used to create in SQL Server since its inception. These tables use a fixed size 8 KB pages that need to be read from and written to disk as a unit. Natively compiled stored procedures refer to an object Type which is new and is supported by in-memory OLTP engine which convert it into machine code, which can further improve the data access performance for memory –optimized tables. Natively compiled stored procedures can only reference memory-optimized tables, they can’t be used to reference any disk –based table. Interpreted Transact-SQL stored procedures, which is what SQL Server has always used. Cross-container transactions refer to transactions that reference both memory-optimized tables and disk-based tables. Interop refers to interpreted Transact-SQL that references memory-optimized tables. Using In-Memory OLTP In-Memory OLTP engine has been available as part of SQL Server 2014 since June 2013 CTPs. Installation of In-Memory OLTP is part of the SQL Server setup application. The In-Memory OLTP components can only be installed with a 64-bit edition of SQL Server 2014 hence they are not available with 32-bit editions. Creating Databases Any database that will store memory-optimized tables must have a MEMORY_OPTIMIZED_DATA filegroup. This filegroup is specifically designed to store the checkpoint files needed by SQL Server to recover the memory-optimized tables, and although the syntax for creating the filegroup is almost the same as for creating a regular filestream filegroup, it must also specify the option CONTAINS MEMORY_OPTIMIZED_DATA. Here is an example of a CREATE DATABASE statement for a database that can support memory-optimized tables: CREATE DATABASE InMemoryDB ON PRIMARY(NAME = [InMemoryDB_data], FILENAME = 'D:\data\InMemoryDB_data.mdf', size=500MB), FILEGROUP [SampleDB_mod_fg] CONTAINS MEMORY_OPTIMIZED_DATA (NAME = [InMemoryDB_mod_dir], FILENAME = 'S:\data\InMemoryDB_mod_dir'), (NAME = [InMemoryDB_mod_dir], FILENAME = 'R:\data\InMemoryDB_mod_dir') LOG ON (name = [SampleDB_log], Filename='L:\log\InMemoryDB_log.ldf', size=500MB) COLLATE Latin1_General_100_BIN2; Above example code creates files on three different drives (D:  S: and R:) for the data files and in memory storage so if you would like to run this code kindly change the drive and folder locations as per your convenience. Also notice that binary collation was specified as Windows (non-SQL). BIN2 collation is the only collation support at this point for any indexes on memory optimized tables. It is also possible to add a MEMORY_OPTIMIZED_DATA file group to an existing database, use the below command to achieve the same. ALTER DATABASE AdventureWorks2012 ADD FILEGROUP hekaton_mod CONTAINS MEMORY_OPTIMIZED_DATA; GO ALTER DATABASE AdventureWorks2012 ADD FILE (NAME='hekaton_mod', FILENAME='S:\data\hekaton_mod') TO FILEGROUP hekaton_mod; GO Creating Tables There is no major syntactical difference between creating a disk based table or a memory –optimized table but yes there are a few restrictions and a few new essential extensions. Essentially any memory-optimized table should use the MEMORY_OPTIMIZED = ON clause as shown in the Create Table query example. DURABILITY clause (SCHEMA_AND_DATA or SCHEMA_ONLY) Memory-optimized table should always be defined with a DURABILITY value which can be either SCHEMA_AND_DATA or  SCHEMA_ONLY the former being the default. A memory-optimized table defined with DURABILITY=SCHEMA_ONLY will not persist the data to disk which means the data durability is compromised whereas DURABILITY= SCHEMA_AND_DATA ensures that data is also persisted along with the schema. Indexing Memory Optimized Table A memory-optimized table must always have an index for all tables created with DURABILITY= SCHEMA_AND_DATA and this can be achieved by declaring a PRIMARY KEY Constraint at the time of creating a table. The following example shows a PRIMARY KEY index created as a HASH index, for which a bucket count must also be specified. CREATE TABLE Mem_Table ( [Name] VARCHAR(32) NOT NULL PRIMARY KEY NONCLUSTERED HASH WITH (BUCKET_COUNT = 100000), [City] VARCHAR(32) NULL, [State_Province] VARCHAR(32) NULL, [LastModified] DATETIME NOT NULL, ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA); Now as you can see in the above query example we have used the clause MEMORY_OPTIMIZED = ON to make sure that it is considered as a memory optimized table and not just a normal table and also used the DURABILITY Clause= SCHEMA_AND_DATA which means it will persist data along with metadata and also you can notice this table has a PRIMARY KEY mentioned upfront which is also a mandatory clause for memory-optimized tables. We will talk more about HASH Indexes and BUCKET_COUNT in later articles on this topic which will be focusing more on Row and Index storage on Memory-Optimized tables. So stay tuned for that as well. Now as we covered the basics of Memory Optimized tables and understood the key things to remember while using memory optimized tables, let’s explore more using examples to understand the Performance gains using memory-optimized tables. I will be using the database which i created earlier in this article i.e. InMemoryDB in the below Demo Exercise. USE InMemoryDB GO -- Creating a disk based table CREATE TABLE dbo.Disktable ( Id INT IDENTITY, Name CHAR(40) ) GO CREATE NONCLUSTERED INDEX IX_ID ON dbo.Disktable (Id) GO -- Creating a memory optimized table with similar structure and DURABILITY = SCHEMA_AND_DATA CREATE TABLE dbo.Memorytable_durable ( Id INT NOT NULL PRIMARY KEY NONCLUSTERED Hash WITH (bucket_count =1000000), Name CHAR(40) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA) GO -- Creating an another memory optimized table with similar structure but DURABILITY = SCHEMA_Only CREATE TABLE dbo.Memorytable_nondurable ( Id INT NOT NULL PRIMARY KEY NONCLUSTERED Hash WITH (bucket_count =1000000), Name CHAR(40) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_only) GO -- Now insert 100000 records in dbo.Disktable and observe the Time Taken DECLARE @i_t bigint SET @i_t =1 WHILE @i_t<= 100000 BEGIN INSERT INTO dbo.Disktable(Name) VALUES('sachin' + CONVERT(VARCHAR,@i_t)) SET @i_t+=1 END -- Do the same inserts for Memory table dbo.Memorytable_durable and observe the Time Taken DECLARE @i_t bigint SET @i_t =1 WHILE @i_t<= 100000 BEGIN INSERT INTO dbo.Memorytable_durable VALUES(@i_t, 'sachin' + CONVERT(VARCHAR,@i_t)) SET @i_t+=1 END -- Now finally do the same inserts for Memory table dbo.Memorytable_nondurable and observe the Time Taken DECLARE @i_t bigint SET @i_t =1 WHILE @i_t<= 100000 BEGIN INSERT INTO dbo.Memorytable_nondurable VALUES(@i_t, 'sachin' + CONVERT(VARCHAR,@i_t)) SET @i_t+=1 END The above 3 Inserts took 1.20 minutes, 54 secs, and 2 secs respectively to insert 100000 records on my machine with 8 Gb RAM. This proves the point that memory-optimized tables can definitely help businesses achieve better performance for their highly transactional business table and memory- optimized tables with Durability SCHEMA_ONLY is even faster as it does not bother persisting its data to disk which makes it supremely fast. Koenig Solutions is one of the few organizations which offer IT training on SQL Server 2014 and all its updates. Now, I leave the decision on using memory_Optimized tables on you, I hope you like this article and it helped you understand  the fundamentals of IN-Memory OLTP . Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Koenig

    Read the article

  • Tricks and Optimizations for you Sitecore website

    - by amaniar
    When working with Sitecore there are some optimizations/configurations I usually repeat in order to make my app production ready. Following is a small list I have compiled from experience, Sitecore documentation, communicating with Sitecore Engineers etc. This is not supposed to be technically complete and might not be fit for all environments.   Simple configurations that can make a difference: 1) Configure Sitecore Caches. This is the most straight forward and sure way of increasing the performance of your website. Data and item cache sizes (/databases/database/ [id=web] ) should be configured as needed. You may start with a smaller number and tune them as needed. <cacheSizes hint="setting"> <data>300MB</data> <items>300MB</items> <paths>5MB</paths> <standardValues>5MB</standardValues> </cacheSizes> Tune the html, registry etc cache sizes for your website.   <cacheSizes> <sites> <website> <html>300MB</html> <registry>1MB</registry> <viewState>10MB</viewState> <xsl>5MB</xsl> </website> </sites> </cacheSizes> Tune the prefetch cache settings under the App_Config/Prefetch/ folder. Sample /App_Config/Prefetch/Web.Config: <configuration> <cacheSize>300MB</cacheSize> <!--preload items that use this template--> <template desc="mytemplate">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</template> <!--preload this item--> <item desc="myitem">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }</item> <!--preload children of this item--> <children desc="childitems">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</children> </configuration> Break your page into sublayouts so you may cache most of them. Read the caching configuration reference: http://sdn.sitecore.net/upload/sitecore6/sc62keywords/cache_configuration_reference_a4.pdf   2) Disable Analytics for the Shell Site <site name="shell" virtualFolder="/sitecore/shell" physicalFolder="/sitecore/shell" rootPath="/sitecore/content" startItem="/home" language="en" database="core" domain="sitecore" loginPage="/sitecore/login" content="master" contentStartItem="/Home" enableWorkflow="true" enableAnalytics="false" xmlControlPage="/sitecore/shell/default.aspx" browserTitle="Sitecore" htmlCacheSize="2MB" registryCacheSize="3MB" viewStateCacheSize="200KB" xslCacheSize="5MB" />   3) Increase the Check Interval for the MemoryMonitorHook so it doesn’t run every 5 seconds (default). <hook type="Sitecore.Diagnostics.MemoryMonitorHook, Sitecore.Kernel"> <param desc="Threshold">800MB</param> <param desc="Check interval">00:05:00</param> <param desc="Minimum time between log entries">00:01:00</param> <ClearCaches>false</ClearCaches> <GarbageCollect>false</GarbageCollect> <AdjustLoadFactor>false</AdjustLoadFactor> </hook>   4) Set Analytics.PeformLookup (Sitecore.Analytics.config) to false if your environment doesn’t have access to the internet or you don’t intend to use reverse DNS lookup. <setting name="Analytics.PerformLookup" value="false" />   5) Set the value of the “Media.MediaLinkPrefix” setting to “-/media”: <setting name="Media.MediaLinkPrefix" value="-/media" /> Add the following line to the customHandlers section: <customHandlers> <handler trigger="-/media/" handler="sitecore_media.ashx" /> <handler trigger="~/media/" handler="sitecore_media.ashx" /> <handler trigger="~/api/" handler="sitecore_api.ashx" /> <handler trigger="~/xaml/" handler="sitecore_xaml.ashx" /> <handler trigger="~/icon/" handler="sitecore_icon.ashx" /> <handler trigger="~/feed/" handler="sitecore_feed.ashx" /> </customHandlers> Link: http://squad.jpkeisala.com/2011/10/sitecore-media-library-performance-optimization-checklist/   6) Performance counters should be disabled in production if not being monitored <setting name="Counters.Enabled" value="false" />   7) Disable Item/Memory/Timing threshold warnings. Due to the nature of this component, it brings no value in production. <!--<processor type="Sitecore.Pipelines.HttpRequest.StartMeasurements, Sitecore.Kernel" />--> <!--<processor type="Sitecore.Pipelines.HttpRequest.StopMeasurements, Sitecore.Kernel"> <TimingThreshold desc="Milliseconds">1000</TimingThreshold> <ItemThreshold desc="Item count">1000</ItemThreshold> <MemoryThreshold desc="KB">10000</MemoryThreshold> </processor>—>   8) The ContentEditor.RenderCollapsedSections setting is a hidden setting in the web.config file, which by default is true. Setting it to false will improve client performance for authoring environments. <setting name="ContentEditor.RenderCollapsedSections" value="false" />   9) Add a machineKey section to your Web.Config file when using a web farm. Link: http://msdn.microsoft.com/en-us/library/ff649308.aspx   10) If you get errors in the log files similar to: WARN Could not create an instance of the counter 'XXX.XXX' (category: 'Sitecore.System') Exception: System.UnauthorizedAccessException Message: Access to the registry key 'Global' is denied. Make sure the ApplicationPool user is a member of the system “Performance Monitor Users” group on the server.   11) Disable WebDAV configurations on the CD Server if not being used. More: http://sitecoreblog.alexshyba.com/2011/04/disable-webdav-in-sitecore.html   12) Change Log4Net settings to only log Errors on content delivery environments to avoid unnecessary logging. <root> <priority value="ERROR" /> <appender-ref ref="LogFileAppender" /> </root>   13) Disable Analytics for any content item that doesn’t add value. For example a page that redirects to another page.   14) When using Web User Controls avoid registering them on the page the asp.net way: <%@ Register Src="~/layouts/UserControls/MyControl.ascx" TagName="MyControl" TagPrefix="uc2" %> Use Sublayout web control instead – This way Sitecore caching could be leveraged <sc:Sublayout ID="ID" Path="/layouts/UserControls/MyControl.ascx" Cacheable="true" runat="server" />   15) Avoid querying for all children recursively when all items are direct children. Sitecore.Context.Database.SelectItems("/sitecore/content/Home//*"); //Use: Sitecore.Context.Database.GetItem("/sitecore/content/Home");   16) On IIS — you enable static & dynamic content compression on CM and CD More: http://technet.microsoft.com/en-us/library/cc754668%28WS.10%29.aspx   17) Enable HTTP Keep-alive and content expiration in IIS.   18) Use GUID’s when accessing items and fields instead of names or paths. Its faster and wont break your code when things get moved or renamed. Context.Database.GetItem("{324DFD16-BD4F-4853-8FF1-D663F6422DFF}") Context.Item.Fields["{89D38A8F-394E-45B0-826B-1A826CF4046D}"]; //is better than Context.Database.GetItem("/Home/MyItem") Context.Item.Fields["FieldName"]   Hope this helps.

    Read the article

  • How to Organize a Programming Language Club

    - by Ben Griswold
    I previously noted that we started a language club at work.  You know, I searched around but I couldn’t find a copy of the How to Organize a Programming Language Club Handbook. Maybe it’s sold out?  Yes, Stack Overflow has quite a bit of information on how to learn and teach new languages and there’s also a good number of online tutorials which provide language introductions but I was interested in group learning.  After   two months of meetings, I present to you the Unofficial How to Organize a Programming Language Club Handbook.  1. Gauge interest. Start by surveying prospects. “Excuse me, smart-developer-whom-I-work-with-and-I-think-might-be-interested-in-learning-a-new-coding-language-with-me. Are you interested in learning a new language with me?” If you’re lucky, you work with a bunch of really smart folks who aren’t shy about teaching/learning in a group setting and you’ll have a collective interest in no time.  Simply suggesting the idea is the only effort required.  If you don’t work in this type of environment, maybe you should consider a new place of employment.  2. Make it official. Send out a “Welcome to the Club” email: There’s been talk of folks itching to learn new languages – Python, Scala, F# and Haskell to name a few.  Rather than taking on new languages alone, let’s learn in the open.  That’s right.  Let’s start a languages club.  We’ll have everything a real club needs – secret handshake, goofy motto and a high-and-mighty sense that we’re better than everybody else. T-shirts?  Hell YES!  Anyway, I’ve thrown this idea around the office and no one has laughed at me yet so please consider this your very official invitation to be in THE club. [Insert your ideas about how the club might be run, solicit feedback and suggestions, ask what other folks would like to get out the club, comment about club hazing practices and talk up the T-shirts even more. Finally, call out the languages you are interested in learning and ask the group for their list.] 3.  Send out invitations to the first meeting.  Don’t skimp!  Hallmark greeting cards for everyone.  Personalized.  Hearts over the I’s and everything.  Oh, and be sure to include the list of suggested languages with vote count.  Here the list of languages we are interested in: Python 5 Ruby 4 Objective-C 3 F# 2 Haskell 2 Scala 2 Ada 1 Boo 1 C# 1 Clojure 1 Erlang 1 Go 1 Pi 1 Prolog 1 Qt 1 4.  At the first meeting, there must be cake.  Lots of cake. And you should tackle some very important questions: Which language should we start with?  You can immediately go with the top vote getter or you could do as we did and designate each person to provide a high-level review of each of the proposed languages over the next two weeks.  After all presentations are completed, vote on the language. Our high-level review consisted of answers to a series of questions. Decide how often and where the group will meet.  We, for example, meet for a brown bag lunch every Wednesday.  Decide how you’re going to learn.  We determined that the best way to learn is to just dive in and write code.  After choosing our first language (Python), we talked about building an application, or performing coding katas, but we ultimately choose to complete a series of Project Euler problems.  We kept it simple – each member works out the same two problems each week in preparation of a code review the following Wednesday. 5.  Code, Review, Learn.  Prior to the weekly meeting, everyone uploads their solutions to our internal wiki.  Each Project Euler problem has a dedicated page.  In the meeting, we use a really fancy HD projector to show off each member’s solution.  It is very important to use an HD projector.  Again, don’t skimp!  Each code author speaks to their solution, everyone else comments, applauds, points fingers and laughs, etc.  As much as I’ve learned from solving the problems on my own, I’ve learned at least twice as much at the group code review.  6.  Rinse. Lather. Repeat.  We’ve hosted the language club for 7 weeks now.  The first meeting just set the stage.  The next two meetings provided a review of the languages followed by a first language selection.  The remaining meetings focused on Python and Project Euler problems.  Today we took a vote as to whether or not we’re ready to switch to another language and/or another problem set.  Pretty much everyone wants to stay the course for a few more weeks at least.  Until then, we’ll continue to code the next two solutions, review and learn. Again, we’ve been having a good time with the programming language club.  I’m glad it got off the ground.  What do you think?  Would you be interested in a language club?  Any suggestions on what we might do better?

    Read the article

  • A Look Back at 2010 Predictions

    - by David Dorf
    Now is the time of year people make their predictions for next year, but before I start thinking about 2011 it's worth a look back to see how my predictions for 2010 fared. 1. Borders and Blockbuster bite the dust. I would have never predicted a strong brand such as Circuit City could die, but now I know it can happen to anyone. Borders has lost the battle with Barnes & Noble and Blockbuster has lost to Netflix. And just to be sure, Amazon put an extra nail in each coffin. Borders received additional investment from Bennett LeBow to keep it afloat, but the stock is down around $1.25 with no profits in sight. Blockbuster filed for bankruptcy back in September. 2. Every retailer finally has a page on Facebook... but very few figure out how to keep fans engaged. Retailer postings become noise, and fans start to unsubscribe. Twitter goes in the same direction. A few standout retailers will figure out how to use social media, and the rest will remain dumbfounded. Most retailers are on the Facebook bandwagon, and their fan bases seem to be increasing thanks to promotions like The Gap's logo redesign, Lowes' black Friday sneak peak, and Walmart's Crowd Savers. There are several examples of f-commerce advancements, including some interesting integrations from Amazon.3. Smartphones consolidate and grow. More and more people will step-up to smartphones, most of which will choose iPhone, Blackberry, and Android phones. Other smartphones will vanish, and networks will start to strain. But retailers will finally embrace mobile as the next big channel. Retail marketing departments will build mobile apps without the help of their IT department, and eventually they will get into a bind. Android has been on a tear lately stealing market share from Blackberry. Palm and Microsoft are trending down, and Apple is holding steady. Smartphone sales are up 15% and expected to continue. Retailers understand the importance of mobile, and some innovative applications have been produced this year. 4. Google helps the little guys. Google will push its Favorite Places project to help give exposure to small retailers and restaurants. They will enable small retailers to act like big ones by providing storefronts, detailed product information, and coupons for consumers. Google will find a way to bring augmented reality to the masses. I can't say I've seen much new from Google regarding Favorite Places, but they've continued to push local product search. From the PC or smartphone, consumers can search for products and see which nearby stores have it stock. Oracle Retail even productized an integration to Google to support this effort. I suppose if Google ever buys Groupon then it will bring them even closer to local shopping. Google talked about augmented humanity, but that has nothing to do with augmented reality. 5. Steve Jobs Is Bugs Bunny and Steve Ballmer is Elmer Fudd. (OK, I stole that headline from an InformationWeek article. I couldn't resist.) Both Apple and Microsoft will continue to open new stores, but only Apple will show real growth. POSReady 2009 (formerly WEPOS) will continue to share the POS market with Linux. The iPhone and iPod will continue to capture market share, but there won't be an Apple tablet. There won't be an Apple tablet? What was I thinking? While Apple has well over 300 stores, there are less than 10 Microsoft stores. Initial impressions show that even though Microsoft is locating its store near Apple Stores, they are not converting customers, with shoppers citing a lack of assortment and high prices. 6. Consolidation of e-commerce software providers. Software vendors in the areas of search, reviews, online call-centers, payments, and e-commerce will consolidate, partly driven by the success of m-commerce and SaaS. Amazon will find someone else to buy, and eBay will continue to lose momentum. Consolidation of e-commerce providers continued with IBM acquiring Sterling Commerce and CoreMetrics, and Oracle recently announcing the acquisition of ATG. Amazon grabbed Zappos, Woot, and Diapers.com to continue its dominance of online selling. While eBay's Marketplace growth may have slowed, its PayPal division is doing quite well, fueled in part by demand for mobile payments. 7. Book publishers mirror music labels. Just as the iPod brought digital downloads to the masses, the Kindle and Nook will power the e-book revolution. Books will continue to use DRM for a few more years before following the path of music. Publishers will try to preserve the margins of hardbacks by associating e-book releases with paperbacks. Amazon has done a good job providing e-reader clients for smartphones, PCs, and tablets. Competition from Barnes & Noble has forced Amazon to support book loaning, and both companies are making it easier for people to publish ebooks (with or without DRM). Progress is slow but steady. 8. NFC makes inroads, RFID treads water. Near Field Communications start to appear in mobile phones, and retailers beta test its use for payments and loyalty programs. RFID tag costs come down a bit, but not enough to spur accelerated adoption.Nokia announced plans to offer NFC-enabled phones in 2011, and rumors are swirling about NFC in the upcoming iPhone.  I think NFC is heading in the right direction, and I've heard more interest from retailers about specialized uses for RFID.9. Digital Signage goes the way of augmented reality. People use their camera phones to leave geo-tagged notes all over cities, rating stores and restaurants, and "painting" graffiti. But people get tired of holding their phones in front of their faces, so AR glasses are offered in much the same way bluetooth headsets emerged. Retailers experiement with in-store advertising using AR. Several retailers like Pizza Hut, Benetton, and Target have experimented with AR but its still somewhat of a gimmick used by marketing.  I think this prediction is a year or two too early. 10. JDA flip-flops again. After announcing their embracing of the .Net architecture, then switching to J2EE after the Manugistics acquisition, JDA will finally decide to standardize on Apple's Objective C. Everything will be ported to the iPhone and be available on the AppStore. After all, there's not much left to try. This was, of course, a joke but the sentiment is still valid.  JDA seems more supply-chain focused than retail focused, which is a an outcrop if their i2 acquisition.  Of the 10 predictions, I'm going to say I got 6 somewhat correct.  (Don't you just love grading your own paper?)  Soon I'll post my predictions for 2011 so be on the lookout.  Until then here's one more prediction:  Va Tech beats Stanford in the Orange Bowl -- count on it!

    Read the article

  • Using the HTML5 &lt;input type=&quot;file&quot; multiple=&quot;multiple&quot;&gt; Tag in ASP.NET

    - by Rick Strahl
    Per HTML5 spec the <input type="file" /> tag allows for multiple files to be picked from a single File upload button. This is actually a very subtle change that's very useful as it makes it much easier to send multiple files to the server without using complex uploader controls. Please understand though, that even though you can send multiple files using the <input type="file" /> tag, the process of how those files are sent hasn't really changed - there's still no progress information or other hooks that allow you to automatically make for a nicer upload experience without additional libraries or code. For that you will still need some sort of library (I'll post an example in my next blog post using plUpload). All the new features allow for is to make it easier to select multiple images from disk in one operation. Where you might have required many file upload controls before to upload several files, one File control can potentially do the job. How it works To create a file input box that allows with multiple file support you can simply do:<form method="post" enctype="multipart/form-data"> <label>Upload Images:</label> <input type="file" multiple="multiple" name="File1" id="File1" accept="image/*" /> <hr /> <input type="submit" id="btnUpload" value="Upload Images" /> </form> Now when the file open dialog pops up - depending on the browser and whether the browser supports it - you can pick multiple files. Here I'm using Firefox using the thumbnail preview I can easily pick images to upload on a form: Note that I can select multiple images in the dialog all of which get stored in the file textbox. The UI for this can be different in some browsers. For example Chrome displays 3 files selected as text next to the Browse… button when I choose three rather than showing any files in the textbox. Most other browsers display the standard file input box and display the multiple filenames as a comma delimited list in the textbox. Note that you can also specify the accept attribute in the <input> tag, which specifies a mime-type to specify what type of content to allow.Here I'm only allowing images (image/*) and the browser complies by just showing me image files to display. Likewise I could use text/* for all text formats registered on the machine or text/xml to only show XML files (which would include xml,xst,xsd etc.). Capturing Files on the Server with ASP.NET When you upload files to an ASP.NET server there are a couple of things to be aware of. When multiple files are uploaded from a single file control, they are assigned the same name. In other words if I select 3 files to upload on the File1 control shown above I get three file form variables named File1. This means I can't easily retrieve files by their name:HttpPostedFileBase file = Request.Files["File1"]; because there will be multiple files for a given name. The above only selects the first file. Instead you can only reliably retrieve files by their index. Below is an example I use in app to capture a number of images uploaded and store them into a database using a business object and EF 4.2.for (int i = 0; i < Request.Files.Count; i++) { HttpPostedFileBase file = Request.Files[i]; if (file.ContentLength == 0) continue; if (file.ContentLength > App.Configuration.MaxImageUploadSize) { ErrorDisplay.ShowError("File " + file.FileName + " is too large. Max upload size is: " + App.Configuration.MaxImageUploadSize); return View("UploadClassic",model); } var image = new ClassifiedsBusiness.Image(); var ms = new MemoryStream(16498); file.InputStream.CopyTo(ms); image.Entered = DateTime.Now; image.EntryId = model.Entry.Id; image.ContentType = "image/jpeg"; image.ImageData = ms.ToArray(); ms.Seek(0, SeekOrigin.Begin); // resize image if necessary and turn into jpeg Bitmap bmp = Imaging.ResizeImage(ms.ToArray(), App.Configuration.MaxImageWidth, App.Configuration.MaxImageHeight); ms.Close(); ms = new MemoryStream(); bmp.Save(ms,ImageFormat.Jpeg); image.ImageData = ms.ToArray(); bmp.Dispose(); ms.Close(); model.Entry.Images.Add(image); } This works great and also allows you to capture input from multiple input controls if you are dealing with browsers that don't support multiple file selections in the file upload control. The important thing here is that I iterate over the files by index, rather than using a foreach loop over the Request.Files collection. The files collection returns key name strings, rather than the actual files (who thought that was good idea at Microsoft?), and so that isn't going to work since you end up getting multiple keys with the same name. Instead a plain for loop has to be used to loop over all files. Another Option in ASP.NET MVC If you're using ASP.NET MVC you can use the code above as well, but you have yet another option to capture multiple uploaded files by using a parameter for your post action method.public ActionResult Save(HttpPostedFileBase[] file1) { foreach (var file in file1) { if (file.ContentLength < 0) continue; // do something with the file }} Note that in order for this to work you have to specify each posted file variable individually in the parameter list. This works great if you have a single file upload to deal with. You can also pass this in addition to your main model to separate out a ViewModel and a set of uploaded files:public ActionResult Edit(EntryViewModel model,HttpPostedFileBase[] uploadedFile) You can also make the uploaded files part of the ViewModel itself - just make sure you use the appropriate naming for the variable name in the HTML document (since there's Html.FileFor() extension). Browser Support You knew this was coming, right? The feature is really nice, but unfortunately not supported universally yet. Once again Internet Explorer is the problem: No shipping version of Internet Explorer supports multiple file uploads. IE10 supposedly will, but even IE9 does not. All other major browsers - Chrome, Firefox, Safari and Opera - support multi-file uploads in their latest versions. So how can you handle this? If you need to provide multiple file uploads you can simply add multiple file selection boxes and let people either select multiple files with a single upload file box or use multiples. Alternately you can do some browser detection and if IE is used simply show the extra file upload boxes. It's not ideal, but either one of these approaches makes life easier for folks that use a decent browser and leaves you with a functional interface for those that don't. Here's a UI I recently built as an alternate uploader with multiple file upload buttons: I say this is my 'alternate' uploader - for my primary uploader I continue to use an add-in solution. Specifically I use plUpload and I'll discuss how that's implemented in my next post. Although I think that plUpload (and many of the other packaged JavaScript upload solutions) are a better choice especially for large uploads, for simple one file uploads input boxes work well enough. The advantage of this solution is that it's very easy to handle on the server side. Any of the JavaScript controls require special handling for uploads which I'll also discuss in my next post.© Rick Strahl, West Wind Technologies, 2005-2012Posted in HTML5  ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • CodePlex Daily Summary for Sunday, April 18, 2010

    CodePlex Daily Summary for Sunday, April 18, 2010New ProjectsBare Bones Email Trace Listener: Bare Bones Email Trace Listener is about the simplest email trace listener you can have. No bells, no whistles, and no good if you need authenticat...Cartellino: Scopo del progetto è la realizzazione di un software in grado di rilevare i dati dai rilevatori 3Tec (www.3tec.it) e stampare i cartellini presenza...Castle Windsor app.config Properties: The Castle Windsor app.config Properties library makes it possible for users of Castle Windsor to reference appSettings values in Windsor's XML pro...DeskD: This is a simple desktop dictionary application(something like WordWeb) created in Java using Netbeans IDE. Since i am new to codeplex all updates ...FunPokerMakerOnline: It is a play of poker online with a game editor. It is done with .net 4 and WPF and SOAP or WCF. KLOCS Team GIN Project: This is a Master's Degree program group project. It may have academic interest, but won't be maintained after June 2010KNN: This is KNN projectProject Santa: Program to organize teams using mysql databases and c# in a clean and robust task and group system. For more information see my blog post at http:/...ProjetoIntegradoJuridico: Sistema Integrado de Acompanhamento JurídicoRSSR for Windows Phone 7: This is a simple RSS reader application, the project aims to show people that it is easy to build application for windows phones. The applicatio...Simple Rcon: Simple Rcon is a simple lightweight rcon client for HL1/HL2 Servers. It is developed in C# and WPFTAB METHOD SQL Create a data dictionary from your Transact SQL code: TABMETHODSQL makes it easier for data/information workers to document their work. Create a data governance solution that maps sql data process, inc...TM BF Tournament: WPF software to manage Trackmania tournament with Battle France RulesviBlog: visinia plugin, this plugin is used to add blogging facility in visinia cmsviNews: visinia plugin, this plugin can be used to create a news portal like cnn.com nytimeVolumeMaster: VolumeMaster is an On Screen Display (OSD) that gets activated whenever the volume changes. It's written in WPF and uses Vista Core Audio API by Ra...WiiCIS.NET: This is a managed port of WiiCIS, which is a Nintendo Wiimote library originally created by TheOboeNerd and posted on Sourceforge.New ReleasesCastle Windsor app.config Properties: Version 1.0: Initial release.Code for Rapid C# Windows Development eBook: Enumerable Debugger Visualizer Version 1.1: Second release of the Enumerable Debugger Visualizer. There are more classes registered and it is more robust. The list of classes I have register...Convection Game Engine (Basic Edition): Convection Basic (40223): Compiled version of Convection Basic change set 40223.CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.59: See Source Code tab for recent change history.DbEntry.Net (Lephone Framework): DbEntry.Net 3.9: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 3.5. It has clearly and easily programing interface ...Hash Calculator: HashCalculator 2.0: Upgraded to .NET Framework 4.0 Added support to calculate CRC32 hash function Added "Cancel" button in the Windows 7 taskbar thumbnailHKGolden Express: HKGoldenExpress (Build 201004172120): New features: Added jump links at top of page of message. Bug fix: Fixed page count bug. Improvements: HKGolden Express now uses DocumentBuild...HTML Ruby: 6.21.4: Styles added to override those on some sites for better rendering of ruby Fix regression on complex ruby annotation rendering Better spacingHTML Ruby: 6.21.5: Removed debug code in preference handling Status bar indicator now resets for each action Replace ruby in place without using document fragment...IceChat: IceChat 2009 Alpha 12.4 EXE Update: This is simply an update to the main IceChat program files and DLL. Simpply overwrite the ones in the place where IceChat 2009 is installed.IceChat: IceChat 2009 Alpha 12.4 Full Install: Build Alpha 12.4 - April 17 2010 Added IceChatScript.dll , needs to be added in same folder with EXE and IPluginIceChat.dll Added Self Notice in ...PokeIn Comet Ajax Library: PokeIn Library v05 x64: With this version, PokeIn library has become a stable. Numerous tests have completed. This is the first release candidate of PokeIn. Cheers!PokeIn Comet Ajax Library: PokeIn Library v05 x86: PokeIn Library version 0.5 (x86) With this version, PokeIn library has become a stable. Numerous tests have completed. This is the first release c...Project Santa: Project Santa V1.0: The first initial release of my project manager program, for more information see http://coderplex.blogspot.com/2010/04/project-manager-using-mysq...Salient: TestingWithVSDevServer v1: Using code from Salient, I have assembled a few strategies for programmatic contol of the Visual Studio Development Server (WebDev.WebServer.exe). ...SharePoint Navigation Menu: spNavigationMenu 1.1: Changed the CAML query so it will order by Link Order, then Title. Added the ability to override the On Hover event on the parent menu to use On ...Simple Rcon: Simple Rcon Version 1: Version 1TAB METHOD SQL Create a data dictionary from your Transact SQL code: RELEASE 1: TESTING THE RELEASE SYSTEMTribe.Cache: Tribe.Cache Beta 0.1: Beta release of Tribe.Cache - Now with cache expiration serviceviBlog: viBlog_beta: visinia plugin to add blogging facility in visinia cmsviNews: viNews_beta: visinia plugin.visinia: visinia_beta2: visinia beta 2 released with many new feature.Visual Studio DSite: Visual C++ 2008 Login Form: A simple login form made in visual c 2008. Source code only.WiiCIS.NET: WiiCIS.NET v0.11: 0.11 Removed an unnecessary function from the Wiimote class, and improved the demo. You will need the latest version of SlimDX to compile the sourc...WinControls TreeListView: TreeListView 1.5.1: -fixes issue #5837 -Preliminary feature #5874WoW Character Viewer: Viewer Setup: Finally, I've brought out the next setup of WoW Viewer. Most loose ends have been tied up. Loading and Saving of character files has been fixed.Most Popular ProjectsRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseMicrosoft SQL Server Community & Samplespatterns & practices – Enterprise LibraryPHPExcelFacebook Developer ToolkitBlogEngine.NETMvcContrib: a Codeplex Foundation projectIronPythonMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIndustrial DashboardFarseer Physics EnginejQuery Library for SharePoint Web ServicesIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationProxi [Proxy Interface]BlogEngine.NETCaliburn: An Application Framework for WPF and Silverlight

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >