Search Results

Search found 15249 results on 610 pages for 'tv shows'.

Page 313/610 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • recent unreliable wireless connection

    - by gabkdlly
    Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

    Read the article

  • Why is LSHW Only listing one of my two HDDs?

    - by Mark
    I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

    Read the article

  • fdisk -l only displays boot partition

    - by Franklin
    I have a SAN, and it's able to read and write to the 50TB RAID just fine, but when I run fdisk -l it only lists the boot partition of the SAN server, and doesn't display anything about the other partitions on the RAID. I've also tried using parted -l with the same result. Now when I type mount it shows that the partitions are mounted just fine. I've never seen this happen. The box is running Openfiler 2.3 (I know it's old, we're in the process of upgrading all our old equipment). We have another SAN that's configured almost identically, and it's able to display the partition info with either of the two commands I mentioned above.

    Read the article

  • How to debug lack of sound in Asus EEE PC

    - by Kalmar
    I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

    Read the article

  • First ATMs programming language

    - by revo
    First ATMs performed tasks like a cash dispenser, they were offline machines which worked with punch cards impregnated with Carbon and a 6-digit PIN code. Maximum withdrawal with a card was 10 pounds and each one was a one-time use card - ATM swallowed cards! The first ATM was installed in London in the year 1967, as I looked at time line of programming languages, there were many programming languages made before that decade. I don't know about the hardware neither, but in which programming language it was written? *I didn't find a detailed biography of John Shepherd-Barron (ATM inventor at 70s) Update I found this picture, which is taken from a newspaper back to the year 1972 in Iran. Translated PS : Shows Mr. Rad-lon (if spelled correctly), The manager of Barros (if spelled correctly) International Educational Institute in United Kingdom at the right, and Mr. Jim Sutherland - Expert of Computer Kiosks. In the rest of the text I found on this paper, these kind of ATMs which called "Automated Computer Kiosk" were advertised with this: Mr. Rad-lon (if spelled correctly) puts his card to one specific location of Automated Computer Kiosk and after 10 seconds he withdraws his cash. Two more questions are: 1- How those ATMs were so fast? (withdrawal in 10 seconds in that year) 2- I didn't find any text on Internet which state about "Automated Computer Kiosk", Is it valid or were they being called Computer in that time?

    Read the article

  • Windows 7 unresponsive after hibernate.

    - by Simon Verbeke
    The last few days, when I get Windows out of hibernate, Windows itself gets unresponsive. I can use any of my programs that were already opened before hibernating, but the window functions (closing, changing the size etc) aren't reacting. I can't open any new programs, except for the Task Manager. Also, I don't get an Internet connection. When I use Ctrl + Alt + Del, I get either a black screen, or the regular background. Then it hangs and after a while shows me a message that Windows failed starting up that "thing"(don't know what it's called in English, something with safety, etc). I have Windows 7 Ultimate installed.

    Read the article

  • Windows Advanced Firewall certificate based IPSEC

    - by Tim Brigham
    I'm working on migrating from using IPSEC settings stored under the 'IP Security Policies on Active Directory' to using the 'Windows Firewall with Advanced Security' for my 2008+ boxes. I have successfully been able to get this set up using Kerberos authentication, however my openswan implementation on my Linux boxes is using certificates. Whenever I try changing the authentication method to computer certificate (using RSA and my root CA) the connection is bombing out. I've made this change at both a connection request policy and on the IPSEC settings on the root Windows Firewall with Advanced Security node. The windows event log shows the authentication request is taking place but failing negotiating a mode. What am I missing here?

    Read the article

  • Why is math taught "backwards"? [closed]

    - by Yorirou
    A friend of mine showed me a pretty practical Java example. It was a riddle. I got excited and quickly solved the problem. After it, he showed me the mathematical explanation of my solution (he proved why is it good), and it was completely clear for me. This seems like natural approach for me: solve problems, and generalize. This is very familiar to me, I do it all the time when I am programming: I write a function. When I have to write a similar function, I generalize the problem, grab the generic parts, and refactor them to a function, and solve the original problems as a specialization of the general function. At the university (or at least where I study), things work backwards. The professors shows just the highest possible level of the solutions ("cryptic" mathematical formulas). My problem is that this is too abstract for me. There is no connection of my previous knowledge (== reality in my sense), so even if I can understand it, I can't really learn it properly. Others are learning these formulas word-by-word, and get good grades, since they can write exactly the same to the test, but this is not an option for me. I am a curious person, I can learn interesting things, but I can't learn just text. My brain is for storing toughts, not strings. There are proofs for the theories, but they are also really hard to understand because of this, and in most of the cases they are omitted. What is the reason for this? I don't understand why is it a good idea to show the really high level of abstraction and then leave the practical connections (or some important ideas / practical motivations) out?

    Read the article

  • this.BoundingBox.Intersects(Wall[0].BoundingBox) not working properly

    - by Pieter
    I seem to be having this problem a lot, I'm still learning XNA / C# and well, trying to make a classic paddle and ball game. The problem I run into (and after debugging have no answer) is that everytime I run my game and press either of the movement keys, the Paddle won't move. Debugging shows that it never gets to the movement part, but I can't understand why not? Here's my code: // This is the If statement for checking Left movement. if (keyboardState.IsKeyDown(Keys.Left) || keyboardState.IsKeyDown(Keys.A)) { if (!CheckCollision(walls[0])) { Location.X -= Velocity; } } //This is the CheckCollision(Wall wall) boolean public bool CheckCollision(Wall wall) { if (this.BoundingBox.Intersects(wall.BoundingBox)) { return true; } return false; } As far as I can tell there should be absolutely no problem with this, I initialize the bounding box in the constructor whenever a new instance of Walls and Paddle is created. this.BoundingBox = new Rectangle(0, 0, Sprite.Width, Sprite.Height); Any idea as to why this isn't working? I have previously succeeded with using the whole Location.X < Wall.Location.X + Wall.Texture.Width code... But to me that seems like too much coding if a simple boolean check could be done.

    Read the article

  • SSIS Catalog: How to use environment in every type of package execution

    - by Kevin Shyr
    Here is a good blog on how to create a SSIS Catalog and setting up environments.  http://sqlblog.com/blogs/jamie_thomson/archive/2010/11/13/ssis-server-catalogs-environments-environment-variables-in-ssis-in-denali.aspx Here I will summarize 3 ways I know so far to execute a package while using variables set up in SSIS Catalog environment. First way, we have SSIS project having reference to environment, and having one of the project parameter using a value set up in the environment called "Development".  With this set up, you are limited to calling the packages by right-clicking on the packages in the SSIS catalog list and select Execute, but you are free to choose absolute or relative path of the environment. The following screenshot shows the 2 available paths to your SSIS environments.  Personally, I use absolute path because of Option 3, just to keep everything simple for myself. The second option is to call through SQL Job.  This does require you to configure your project to already reference an environment and use its variable.  When a job step is set up, the configuration part will require you to select that reference again.  This is more useful when you want to automate the same package that needs to be run in different environments. The third option is the most important to me as I have a SSIS framework that calls hundreds of packages.  The main part of the stored procedure is in this post (http://geekswithblogs.net/LifeLongTechie/archive/2012/11/14/time-to-stop-using-ldquoexecute-package-taskrdquondash-a-way-to.aspx).  But the top part had to be modified to include the logic to use environment reference. CREATE PROCEDURE [AUDIT].[LaunchPackageExecutionInSSISCatalog] @PackageName NVARCHAR(255) , @ProjectFolder NVARCHAR(255) , @ProjectName NVARCHAR(255) , @AuditKey INT , @DisableNotification BIT , @PackageExecutionLogID INT , @EnvironmentName NVARCHAR(128) = NULL , @Use32BitRunTime BIT = FALSE AS BEGIN TRY DECLARE @execution_id BIGINT = 0; -- Create a package execution IF @EnvironmentName IS NULL BEGIN   EXEC [SSISDB].[catalog].[create_execution]     @package_name=@PackageName,     @execution_id=@execution_id OUTPUT,     @folder_name=@ProjectFolder,     @project_name=@ProjectName,     @use32bitruntime=@Use32BitRunTime; END ELSE BEGIN   DECLARE @EnvironmentID AS INT   SELECT @EnvironmentID = [reference_id]    FROM SSISDB.[internal].[environment_references] WITH(NOLOCK)    WHERE [environment_name] = @EnvironmentName     AND [environment_folder_name] = @ProjectFolder      EXEC [SSISDB].[catalog].[create_execution]     @package_name=@PackageName,     @execution_id=@execution_id OUTPUT,     @folder_name=@ProjectFolder,     @project_name=@ProjectName,     @reference_id=@EnvironmentID,     @use32bitruntime=@Use32BitRunTime; END

    Read the article

  • Can ping localhost but can't browse

    - by Anna
    I know this is a pretty common question but I did my research and couldn't find a solution for this issue. I'm configuring a development application server and I came to the point where I can ping both localhost and 127.0.0.1, but I cannot browse either of them from IE or Firefox. I can browse and ping other websites (such as google) just fine. I tried flushing the dns (ipconfig /flushdns), restarting the IIS Admin service, restarting IIS itself, etc, and nothing seems to work. The results from ipconfig /all shows IP Rounting Enabled = No and WINS Proxy Enabled = No. Hwat is intriguing to me is that I compared everything in IIS in the dev environment with the production environment and the settings are the same, but I can browse localhost in production, but not in dev! What could be causing the inability to browse localhost and 127.0.0.1 from IE and Firefox?

    Read the article

  • Problem with wake after suspend using USB remote.

    - by Bod
    Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

    Read the article

  • VMware 1.0.1 Windows7 - Ubuntu hostnames

    - by Kyle K
    I'm trying to run Ubuntu as the guest OS using VMWware 1.0.10 with Windows 7 Ultimate as the host OS. I had this set up previously with Win XP as the host OS and in fact I'm using the same .vmx My problem is I can't get either Win7 or Ubuntu to be able to ping the other by hostname. After installing Samba and Winbind on Ubuntu, I was able to get this working when under WinXP, but for some reason I can't get it to work under Win7. I can ping by IP Address, and the guest OS even shows up by hostname under the Windows networking panel (but of course I can't do anything with it), but pinging using short hostnames just won't work. Also, Win7 firewall is turned off completely.

    Read the article

  • 404 Errors in ubuntu 13.10

    - by Levan
    Just installed ubuntu 13.10 I did apt-update in terminal and sow this Err http://ppa.launchpad.net /ubuntu/saucy amd64 Packages 404 Not Found Err http://ppa.launchpad.net /ubuntu/main amd64 Packages 404 Not Found Err http://ppa.launchpad.net /ubuntu/saucy i386 Packages 404 Not Found Err http://ppa.laun W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/saucy/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/main/binary-amd64/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/saucy/binary-i386/Packages 404 Not Found W: Failed to fetch http://ppa.launchpad.net/ubuntu-wine/ppa/dists//ubuntu/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. I do not understand why am I getting this errors wine's ppa shows that 13.10 is available and the above I even do not know what is it ?? any help how to fix this grep -rn "ubuntu-wine" /etc/apt/sources* /etc/apt/sources.list.d/ubuntu-wine-ppa_-saucy.list:1:deb http://ppa.launchpad.net/ubuntu-wine/ppa /ubuntu saucy main /etc/apt/sources.list.d/ubuntu-wine-ppa_-saucy.list:2:# deb-src http://ppa.launchpad.net/ubuntu-wine/ppa /ubuntu saucy main

    Read the article

  • Why can't I run any Android NDK commands?

    - by TheBuzzSaw
    I had been running Mint 12 before, and everything was working there. I switched to Ubuntu 12.04, and now I am very frustrated. When I run ndk-build, I get /home/buzz/ndk/prebuilt/linux-x86/bin/make: not found So, I changed to that folder directly. When I type in ./make, I get bash: ./make: No such file or directory Typing ls clearly shows the file where I am! I did some hacking around (pointing to external tools) to get past each error (just to experiment), and I ran into this! /home/buzz/ndk/toolchains/arm-linux-androideabi-4.6/prebuilt/linux-x86/bin/arm-linux-androideabi-gcc: Command not found Why? Why are all these files unable to be found? As I said above, this was all working just fine in another distro. What changed? What's extra frustrating is that if I push TAB to auto-complete, it works. So, the file is clearly there (and clearly marked with execution permissions). So, why can't it be found?

    Read the article

  • Grub os-probe showing deleted Windows installation

    - by Sanjay
    I recently purchased a Dell Vostro notebook with Ubuntu Netbook edition 10.04 pre-installed. I tried adding a partition and installed Windows XP but it didn't work out due to too many partitions in the system already. Now I have restored the laptop to factory setting using Dell Utility partition and the Windows partition is completely deleted, however my grub2 still shows Windows on /dev/sda2 sudo os-probe Microsoft Windows XP Professional (on /dev/sda2) Any ideas how to remove it from grub? I know I can remove /etc/grub.d/30_os-probe but I am more interested in why os-probe is showing the deleted partition.

    Read the article

  • SCSI driver installation trouble

    - by Vicky
    I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

    Read the article

  • how to restore grub

    - by takeshin
    During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

    Read the article

  • How can I get nvidia-96 installed?

    - by Bob
    I'm at my wits end here. This is my last effort before I go back to Windows. I need to get nvidia-96 proprietary driver installed. Synaptic won't install it because it says it has dependencies. I installed every single dependency it listed except for "xorg-video-abi-10" which does not show up as an item that can be installed. I have no idea what to do. Using 11.10 with a NVIDIA Geforce 3 GPU. Anyone know how to get this dang driver installed? @fossfreedom: the opensource driver is extremely slow. So slow that the OS is unusable—words appear seconds after I type them—programs take forever to perform actions. Also it is causing my monitor to turn on and off for no reason. @yossile: synaptic shows that I have xserver-xorg-core installed. And xserver-xorg-core-udeb does not show up as something that can be installed. @papseddy: when I try to install the downloaded nvidia driver it says it won't work until I disable Nouveau kernel driver. I have tried everything to get this dang Nouveau kernel driver disabled. Nothing has been successful.

    Read the article

  • Why is my Output distorted after encoding with Expression Encoder?

    - by WernerCD
    I'm a "n00b" when it comes to re-encoding files. I'm trying to re-encode an AVI into a silverlight container via Encoding Video using Expression Encoder 4.0. As you can see in the video, the left is the input and it looks/sounds fine. The right is the output and it... doesn't. I'm unsure of where to go from here. I'm not sure why the output is jacked up, since the input looks fine. Input Video properties: AVI 2.49GB 22:34 809x605 Video: TSCC 809x605 15fps [Stream 00] Audio: PCM 22050Hz mono 352kbps [Stream 01] Choice of output doesn't seem to matter, they all end up distorted like the picture shows.

    Read the article

  • Commands don't have permission when using absplute path

    - by Markos
    I have folders set up this way: /srv/samba/video getfacl /srv/samba/video # file: srv/samba/video # owner: root # group: nogroup user::rwx group::--- group:sambaclients:rwx group:deluge:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:sambaclients:rwx default:group:deluge:rwx default:mask::rwx default:other::--- That means, user deluge has rwx to folder /srv/samba/video. However, when running command as user deluge, I am getting weird permission errors. When in folder /srv/samba/video: sudo -u deluge mkdir foo works flawlessly. But when using absolute path: sudo -u deluge mkdir /srv/samba/video/foo I am getting permission denied. When running sudo -u deluge id, I get output uid=113(deluge) gid=124(deluge) skupiny=124(deluge) which shows that user deluge is indeed in group deluge. Also, the behavior was the same when I gave the permissions also to user deluge not just group deluge. When executing as non-system user, it does work. The reason that I want to use absolute paths is that I am using automatically triggered post-download script which extracts some files into the folder. I have spent way too many hours to solve this problem myself. mkdir isn't the only command that fails, touch is doing the same thing, so I suspect that it's not mkdir's fault. If you need more info, I will try to put it in here, just ask. Thanx in advance.

    Read the article

  • How can I change ACLs recursively using cacls.exe?

    - by maaartinus
    I want to restrict the access for everything inside the work directory to me and the system only. I tried this with the following command: cacls.exe work /t /p 'PIXLA09\Maaartin:f' 'NT AUTHORITY\SYSTEM':f However it doesn't work at all. The following command should show only the two specified users but instead shows a very long list of permissions: cacls.exe work/somedirectory I tried to use /g instead of /p, too. Since I didn't use /e the permissions shouldn't get edited but replaced. Any ideas what's wrong?

    Read the article

  • Using the Java SE 8 Date Time API with JPA 2.1

    - by reza_rahman
    Most of you are hopefully aware of the new Date Time API included in Java SE 8. If you are not, you should check them out right now using the Java Tutorial Trail dedicated to the topic. It is a significantly leap forward in processing temporal data in Java. For those who already use Joda-Time the changes will look very familiar - very simplistically speaking the Java SE 8 feature is basically Joda-Time standardized. Quite naturally you will likely want to use the new Date Time APIs in your JPA domain model to better represent temporal data. The problem is that JPA 2.1 will not support the new API out of the box. So what are you to do? Fortunately you can make use of fairly simple JPA 2.1 Type Converters to use the Date Time API in your JPA domain classes. Steven Gertiser shows you how to do it in an extremely well written blog entry. Besides explaining the problem and the solution the entry is actually very good for getting a better understanding of JPA 2.1 Type Converters as well. I think such a set of converters may be a good fit for Apache DeltaSpike as a Java EE 7 extension? In case you are wondering about Java SE 8 support in the JPA specification itself, Nick Williams has already entered an excellent, well researched JIRA entry asking for such support in a future version of the JPA specification that's well worth looking at. Another possibility of course is for JPA providers to start supporting the Date Time API natively before anything is formalized in the specification. What do you think?

    Read the article

  • Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

    - by BLAU
    My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

    Read the article

  • Ubuntu 12.04 - default Radeon driver does not work at all

    - by mumble
    I've recently upgraded to 12.04 LTS and I have an ATI Radeon HD5670. I've heard that the open source 'Radeon' driver is used by default. However, it wasn't showing anything for me. What I did was I added the 'nomodeset' option to boot up and install fglrx. But it didn't work well for me as it introduced a lot of problems (freezes/glitches). So I removed/purged fglrx and am planning to use the open source drivers instead. So my question is this: Why is my default Radeon driver not working? Is anyone having a similar issue? I've also tried using the ubuntu-x-swat driver by running the ff commands: sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update But the result was the same as the Radeon driver. Nothing shows up on system boot. Any ideas? Thanks in advance! Update Running lspci -nn | grep VGA gives me the following: 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Redwood [Radeon HD 5670] [1002:68d8]

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >