Search Results

Search found 8613 results on 345 pages for 'wpf 3d'.

Page 313/345 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

  • No video signal at boot with custom built computer

    - by Bart Pelle
    After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

    Read the article

  • Is having a [high-end] video card important on a server?

    - by Patrick
    My application is quite interactive application with lots of colors and drag-and-drop functionality, but no fancy 3D-stuff or animations or video, so I only used plain GDI (no GDI Plus, No DirectX). In the past my applications ran in desktops or laptops, and I suggested my customers to invest in a decent video card, with: a minimum resolution of 1280x1024 a minimum color depth of 24 pixels X Megabytes of memory on the video card Now my users are switching more and more to terminal servers, therefore my question: What is the importance of a video card on a terminal server? Is a video card needed anyway on the terminal server? If it is, is the resolution of the remote desktop client limited to the resolutions supported by the video card on the server? Can the choice of a video card in the server influence the performance of the applications running on the terminal server (but shown on a desktop PC)? If I start to make use of graphical libraries (like Qt) or things like DirectX, will this then have an influence on the choice of video card on the terminal server? Are calculations in that case 'offloaded' to the video card? Even on the terminal server? Thanks.

    Read the article

  • Is there a historical computer peripherals or accessories museum or even just a current list?

    - by zimmer62
    Thinking about all the unique and different peripherals I've owned over the years, from ISA capture cards, to parallel port controlled shutter glasses for 3d games. I've seen many many accessory or computer peripherals come and go. The nostalgia of these things is a lot of fun. I tried to find some sort of historical time-line or list but what mostly turned up is computers themselves. I'm more interested in the mice, scanners, the weird adapters that shouldn't exist, short run very rare products, strange devices from computer shows in the 80's and 90's... Hardware you might find in a geeks basement that would be completely useless now, but was the coolest thing around when it was new. An example would be a drawing tablet I had for my TI-99 computer, or the audio tape player accessory for a C64 which let you save files to audio tapes, An ISA card that did the same for PC's hooked up to a VCR. Remember that IBM-PC Jr upgrade kit, that added a floppy drive, more memory and the AT switch in the back? I'd love to find either a wiki, or a list that has already been assembled which contain many of these weird (or common) accessories. I've had so many over the years I suppose I could start a wiki here if such a list doesn't already exist.

    Read the article

  • Sudden and frequent hangs on desktop computer: mobo or CPU fault?

    - by djechelon
    I have a desktop computer equipped with an ASUS Crosshair 2 Formula and a Phenom x6 3.2GHz CPU. My problem is that often the computer will hang all of a sudden, completely stopping responding. When that occurs, reset key is inoperative and power button turns the computer off but is unable to turn it back on. I have to physically disconnect power cable. The problem can occur anytime, when I'm booting Windows, when I'm logging in, when I'm listening to a song, when I'm browsing Internet, etc. It always occurs after very few minutes of 3D gameplay I thought it was a video card fault. I had 3 8800GTX so I could try all combinations of them: didn't fix I thought it was a RAM problem: I tried running with only a subset of my DDR2 banks but didn't fix. Almost every time I have to reset and reconfigure BIOS (without AHCI, Win7 won't boot, so I need to restore a few things). If I enable AMD Live, Cool&Quiet or other things from CPU configuration menu I'll be sure that the computer won't reach Windows desktop in 99% of cases (it randomly hangs somewhere in the boot process or even in the BIOS POST). Another interesting thing is that during the POST process the computer always takes unusually long time detecting USB devices (LCD POSTer shows USB INIT), and I've also tried disconnecting all USB devices but didn't take less time to POST BIOS revision is 2702, the latest. Today I found a different behaviour once: during boot screen I got a BSOD with error Stop 0x00000101 A clock interrupt was not received on a secondary processor within the allocated time interval, and this is usually related to overclocking, but I never overclocked my CPU. Judging from the description of my problem, hoping someone had the same and fixed, and since I don't have a spare CPU or motherboard for replacement, I'd like to ask if you think this is a problem with faulty CPU or faulty motherboard, and if I can perform additional tests (I mean software tests because of my lack of spare components) to identify the component to replace.

    Read the article

  • Remote mouse pointer not visible in VNC

    - by aef
    I used VNC desktops as a kind of collaboration server, as shared planning and pair programming environment for a long time. Now my latest iteration uses a KVM guest running Fedora 17 "Beefy Miracle", the Cinnamon desktop environment and an X11VNC server. The X11VNC server is automatically started with the desktop environment using the following command: x11vnc -localhost -many -shared -display :0 -bg My problem is that depending on the VNC client, the mouse pointer of the remote system which is shown through VNC is not synchronized to my client. I really need this, so I can see what my partner is doing on the desktop. When using Vinagre 3.2.1 on Ubuntu Oneiric Ocelot (11.10) or Vinagre 2.3.0.3 on Debian Squeeze (6.0) and I don't have my local mouse pointer inside the VNC view, I cannot see the mouse pointer of my remote system, nor its movement. When using TightVNC on Windows 7, I can recognize a mouse pointer trace for very short amounts of time after moving the mouse, but it is not clearly visible. Using UltraVNC on Windows 7 the mouse pointer is clearly visible all the time. With Gnome 2 I never had any problems with remote pointer synchronization, using exactly the same clients. I suspect this could have something to do with Cinnamon's dependency on 3D acceleration. On the other hand, it doesn't change anything to start Cinnamon's fallback environment Cinnamon 2D. Update: Same effect when I use Gnome 3.

    Read the article

  • Laptop authentication/logon via accelometer tilt, flip, and twist

    - by wonsungi
    Looking for another application/technology: A number of years ago, I read about a novel way to authenticate and log on to a laptop. The user simply had to hold the laptop in the air and execute a simple series of tilts and flips to the laptop. By logging accelerometer data, this creates a unique signature for the user. Even if an attacker watched and repeated the exact same motions, the attacker could not replicate the user's movements closely enough. I am looking for information about this technology again, but I can't find anything. It may have been an actual feature on a laptop, or it may have just been a research project. I think I read about it in a magazine like Wired. Does anyone have more information about authentication via unique accelerometer signatures? Here are the closest articles I have been able to find: Knock-based commands for your Linux laptop Shake Well Before Use: Authentication Based on Accelerometer Data[PDF] Inferring Identity using Accelerometers in Television Remote Controls User Evaluation of Lightweight User Authentication with a Single Tri-Axis Accelerometer Identifying Users of Portable Devices from Gait Pattern with Accelerometers[PDF] 3D Signature Biometrics Using Curvature Moments[PDF] MoViSign: A novel authentication mechanism using mobile virtual signatures

    Read the article

  • CodePlex Daily Summary for Wednesday, November 06, 2013

    CodePlex Daily Summary for Wednesday, November 06, 2013Popular ReleasesWin_8 (??? Devel Studio 2 ??? 3): Win8 0.8 + Sample (.dvs): ???????------------------------------------------ 1. ????????? ??????????? ????????? ??????. 2. ?????????? ???? , ????????? ? ?????????? ???? ????. 3. ?????????? ?????? ??????. 4. ?????????? ????????? ???????????. 5. ????????????? ??? . English----------------------------------------------------------------------- 1. Added ability to load icons. 2. Fixed bugs related to obtaining names of shapes. 3. Fixed a memory leak. 4. Fixed some defects. 5. Optimized code. ---------------------------...NWTCompiler: NWTCompiler v2.4.0: This version fixes a bug with Pinyin and adds support for the 2013 English NWT.ConEmu - Windows console with tabs: ConEmu 131105 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe"CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Home Access Plus+: v9.7: Updated: JSON.net Fixed: Issue with the Windows 8 App Added: Windows 8.1 App Added: Win: Self Signed HAP+ Install Support Added: Win: Delete File Support Added: Timeout for the Logon Tracker Removed: Error Dialogs on the User Card Fixed: Green line showing over the booking form Note: a web.config file update is requiredWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.Community Forums NNTP bridge: Community Forums NNTP Bridge V55 (LiveConnect): This is a which can be used with the new LiveConnect authentication and the MSDN forums. It fixed a bug where the authentication does not work after 1 hour. A logfile will be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt" or attached it to a issue.xUnit.net - Unit testing framework for C# and .NET (a successor to NUnit): xUnit.net Visual Studio Runner: A placeholder for downloading Visual Studio runner VSIX files, in case the Gallery is down (or you want to downgrade to older versions).Social Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyVeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 - 1.0.0.0: Set the default view for a user for a particular entity based on security role Hide/ Show views for a user for a particular entity based on his security role Choose the preferred role for a user for view configuration when the user have more than one security role in the system. Ability to exclude/ include a user from view configuration as per business requirementsDuplica: duplica 0.2.498: this is first stable releaseDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerStock Track: Version 1.2 Stable: Overhaul and re-think of the user interface in normal mode. Added stock history view in normal mode. Allows user to enter orders in normal mode. Allow advanced user to run database queries within the program. Improved sales statistics feature, able to calculate against a single category. Updated database script file. Now compatible with lower version of SQL Server.VG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...New Projects.Net PG: Just university projectA2D: 1. Cache System 2. Event System 3. IoC 4. Sql Dispatcher System 5. Session System 6. ???Command Bus 7. ????Advantage Browser: A web browser made in Visual Basic 2010 for all to add and learn from or just use.BarCoder: BarCoder is C# Web app for creating EAN-8 and EAN-16 bar codec in vector graphic image format.CLIDE .NET: CLIDE .NET The Command Line IDE for .NET Because Code is just CodeDevcken Java Library: Devcken's Java LibraryDouble Sides Flipping Control - Windows Phone: Double Sides Flipping Control The Control features the following: Two Sides Control which flipping across its center in Both Directions based on horizontal geFigTree FHMS (Funeral Home Management System): FigTree FHMS (Funeral Home Management System) application is outfitted for daily operations of your funeral home.InChatter: InChatter is a Instant messaging communication module for a desktop application programmed by C#. And the server is a WCF program.Mod.Training: Some helpful examples about Orchardy stuffPlupload MVC4 Demo: This project shows how to implement Plupload with an MVC applicationQuality Control Management System: QCMS is a web-based Test Management systemQuan Ly Nha Thuoc: Project Qu?n Lý Ti?m Thu?c Tây Email: phuoc.nh2953@sinhvien.hoasen.edu.vnRandomchaos DX11 Engine: An open source C++ DX 11 EngineService Gateway: The service gateway enables composition and agility for web sites and services.Sortable objects: Sortable objects server and client sideSTSADM ExportCrawlLog - SP Foundation 2010: STSADM extension to see/export SharePoint Fiundation 2010 MSSearch configuration and Crawl LogsTACACS Plus Extended: tacacs+ updates to support subnet specific configurations and reduced configuration with ldap access.TKinect: Framework for Testing Kinect ApplicationsWebApi Data Wrapper: This project - a collection of wrapper for WebAPI.WPF ExpressionEditor: Control representing expression editor. Allows usage of custom expression parsers.

    Read the article

  • Switching from Onboard intel to Nvidia Dedicated GPU

    - by Anarkie
    How can I switch from Intel onboard grpahics to Nvidia Dedicated GPU? When I go to windows screen resolution I see intel. I cant change it. I go to Device Manager, I see both Adapters are there and Nvidia is known.I disabled intel, I didnt see any option to set one as primary so I disabled intel, black screen!Reboot and re-enable intel. I right click on the desktop, choose "Nvidia Control Panel" and on 3D options I chose the desired game I want to play, High performance Nvidia, but it didnt switch when I started the game. Then I made preferred GPU in the global settings High performance Nvidia for everything it still didnt change.I understand to save the battery etc. there is a switch option between these two but I dont see this switch when it is necessary, I cant also switch manually?Is there a manual switch FN key?I looked but couldnt find. Why I want to do this? 1) Better game peformance. 2) I want to play an old game from 2002(Diablo 2 LOD), when I start the game there are black bars on the sides, so screen becomes just smaller which I dislike!I heard this is intel's specification to center the display.But instead I would like to scale or expand it to fit widescreen(fullscreen).Which should be possible with Nvidia. My Notebook Specs: Fujitsu Lifebook AH531, Win7 , 64 bit, i5, intel HD graphics onboard, Nvidia GT 525. I didnt install Nvidia later, it was always installed and ready from the moment I turned on the computer first time. How I determined that the cards werent switched when I am playing the game: with the windows key I exited from the game, then looked at screen resolutions menu, still saw intel, also the game was still with black bars.I know intel GPU should enough for Diablo 2 but I am interested in this answer for further games, I dont always play Diablo, what if I install an up to date game for example?Then Intel will not be sufficient.I would like to learn the switch option.

    Read the article

  • Ubuntu 12.10 64bit host reboots when trying to install any guest system using VirtualBox

    - by gts123
    I am having a really nasty problem with VirtualBox as everytime I try to install any guest OS(using ISO file as CD for installation media), the installation starts normally but as soon as it is about to start either installing to virtual hard drive or loading(e.g. as LiveFS) it causes the host system to reboot abruptly. Config is as below: Host system: Ubuntu 12.10 64bit - Intel® Core i7-2640M CPU @ 2.80GHz × 4 Virtualbox version: 4.1.18_Ubuntu r78361 Guest OS systems tried: 32bit version of FreeBSD 9, Debian 6, Tails 0.14 VM setup Tried to have the minimal setup necessary just in case it would avoid for each system to make sure I'd avoid conflicts, but to no avail. I've tried different values and combinations of the below but the problem still persists: Shared Clipboard: Disabled Show in fullscreen/seamless: Disabled Remember runtime changes: DIsabled Base Memory: 2048 MB Chipset: PIIX3 IO APIC: Disabled EFI: Disabled Absolute Pointing device: Disabled Processor(s): 1 CPU PAE/NX: Disabled VT-x/AMD-V: Disabled Video Memory: 12 MB 3d/2d acceleration: Disabled Storage IDE COntroller: PIIX3 (same as chipset instead of PIIX4) Use host I/O cache: No Audio: disabled Network adapter: NAT USB controller: disabled No shared folder Also another sideeffect of the reboot is that it appears that it does not log any information in the error log files; not making things any easier. Please help.

    Read the article

  • Problem mirroring two monitors with different resolution

    - by quad
    Hello I am trying to put two monitors in mirror mode (Windows 7 Professional) with Ultramon 3.1.0. The two monitors: Main monitor: 24" Asus. 1680x1050 resolution (16/10). Secondary monitor: 19" LG. 1280x1024 resolution. The graphic card is a Nvidia GeForce 8600 GT. I have installed the Ultramon 3.1.0 and I have created a mirror, with the "stretch mirror image to fill monitor" and the "disable video overlays and 3D acceleration". When I start the mirroring, there are two zones in the lateral edges that are not displayed in the second monitor. I think this is because the width of the main monitor is 1680 px. and the width of the secondary monitor is 1280 px., but I have indicated "stretch mirror image to fill monitor" in the options. The same occurs in the top and the bottom edges, but the diference is minimal (1050 vs 1024 pixels). I want the same image (distortioned in the secondary monitor if is neccesary), but I don't know what is failing. Someone can help me, please? I have read Mirrored monitors of different resolution. Cloned screen on monitors with different resolutions

    Read the article

  • Ubuntu 10.10 forgets desktop theme.

    - by Marcelo Cantos
    I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matt white. This last time (just this morning), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? EDIT: It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

    Read the article

  • DVI splitter not working as expected/confusion between DVI-D and -I

    - by Freakishly
    Hey guys, thanks for looking. I have an ATI FirePro™ V3700 in my desktop machine, and I have been running a dual-monitor setup quite effortlessly, thanks to the two DVI ports on the card. I came upon a third monitor, and wanted to extend my desktop to 3 screens, so I purchased a DVI splitter from Amazon. Now, I can only duplicate the second monitor onto the third, not extend it. I've tried all possible combinations of input to no avail. Here's the setup: The ATI FirePro™ V3700 has two Dual-Link DVI-I outputs The splitter splits a single Dual-Link DVI-I port into two Dual-Link DVI-I outputs Two of the monitors are NEC E222W, and the third monitor is a Dell 2001FP. Each monitor has one D-Sub and one Dual-Link DVI-D input. Cables going from the video card to the monitors are two Dual-Link DVI-D to the NECs and one Single-Link DVI-D to the Dell. Is the problem likely with the DVI-D/DVI-I mismatch? Or is it with the cable on the Dell that is only a Single-Link? The cables are easily replaceable, the monitors not so much. Thanks for your time, I really appreciate it. http://www.amd.com/us/products/workstation/graphics/ati-firepro-3d/v3700/Pages/v3700-specs.aspx http://www.amazon.com/Cables-Unlimited-DVI-D-Splitter-PCM-2260/product-reviews/B000H09RFM/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1 www dot newegg dot com/Product/Product.aspx?Item=N82E16824002495 accessories dot us dot dell dot com/sna/PopupProductDetail.aspx?cs=19&l=en&c=us&sku=320-1578 Apologies for the fudged links, I'm new here and they won't let me post more than two :P

    Read the article

  • Assigning IPs to OpenVZ containers

    - by Vojtech
    I have recently bought myself a physical server and I am trying to create containers which would have their IPs. The physical machine has both IPv4 and IPv6 addresses. I have accessible another IPv4 and some other IPv6 addresses which I would like to assign to the container. I managed to assign the addresses as follows: # vzctl set 101 --ipadd 144.76.195.252 --save I can ping to the machine from the physical machine, but not from the outside world. This also applies to the IPv6 I assigned as well. This is ifconfig of the physical machine: eth0 Link encap:Ethernet HWaddr d4:3d:7e:ec:e0:04 inet addr:144.76.195.232 Bcast:144.76.195.255 Mask:255.255.255.224 inet6 addr: 2a01:4f8:200:71e7::2/64 Scope:Global inet6 addr: fe80::d63d:7eff:feec:e004/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:217895 errors:0 dropped:0 overruns:0 frame:0 TX packets:16779 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:322481419 (307.5 MiB) TX bytes:1672628 (1.5 MiB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet6 addr: fe80::1/128 Scope:Link UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:3 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1108 (1.0 KiB) TX bytes:1108 (1.0 KiB) This is ifconfig of the OpenVZ container: # ifconfig venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 inet6 addr: 2a01:4f8:200:71e7::3/64 Scope:Global UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1108 (1.0 KiB) TX bytes:1108 (1.0 KiB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:144.76.195.252 P-t-P:144.76.195.252 Bcast:144.76.195.252 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 What do I need to do to have the container accessible from the outside world? What could I have forgotten? Thanks.

    Read the article

  • Redmine does not return the web page

    - by m0skit0
    I migrated a Redmine installation from an Ubuntu machine to a Debian one (both 32-bits), and now for some reason, for some users it doesn't return the page but only a 200 OK message. Here is the flow (from Wireshark): GET /issues/142 HTTP/1.1 Host: debian:3000 User-Agent: Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:17.0) Gecko/20100101 Firefox/17.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Cookie: _redmine_session=BAh7DCIQX2NzcmZfdG9rZW4iMStIM1RBNTlNelZVUXlUazgrR1pUNGUvNGdEbytUZzRyMVFSUnBvNGhlSDg9Ihd0aW1lbG9nX2luZGV4X3NvcnQiEnNwZW50X29uOmRlc2MiD3Nlc3Npb25faWQiJThiMDk0MzVhOTEzYTI0MzVjOGEzYTRmNDU0NzcwMTAwIgx1c2VyX2lkaQoiFmlzc3Vlc19pbmRleF9zb3J0IgxpZDpkZXNjIg1wZXJfcGFnZWlpIgpxdWVyeXsHOg9wcm9qZWN0X2lkaQc6B2lkaQo%3D--8588c221c0642a12f396239455fb702aec14c9c9; my_wiki_session=f70ae11e1c533c86f0e039d63cf3f69c; my_wikiUserID=1; my_wikiUserName=Yasin Cache-Control: max-age=0 HTTP/1.1 200 OK Connection: Keep-Alive Date: Wed, 12 Dec 2012 16:30:16 GMT Server: WEBrick/1.3.1 (Ruby/1.8.7/2010-08-16) Content-Length: 0 As you can see, I get nothing from the server. This is mostly random because this blank page happens sometimes for some users, and for other users it almost never returns the page... I'm absolutely lost here. Any idea about what can be the cause? Thanks in advance!

    Read the article

  • CodePlex Daily Summary for Thursday, October 11, 2012

    CodePlex Daily Summary for Thursday, October 11, 2012Popular ReleasesOstrivDB: OstrivDB 0.1: - Storage configuration: objects serialization (Xml, Json), storage file compressing, data block size. - Caching for Select queries. - Indexing. - Batch of queries. - No special query language (LINQ used). - Integrated sorting and paging. - Multithreaded data processing.Mido: Mido v0.7: Mido is the simplest utility that helps to make watermarks on images and resize them. It has a very thin installer. The program has beta mark but it is able to draw watermark text, watermark images, resize pictures. Change list: + Opacity option + Stroke option + Bold, italic, underline options + Show progress during loading of images + Allow rotate watermart + Allow write multiline text as watermark + Add text aligment if text contains several lines + Add button 'clear custom position' + A...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.TelerikMvcGridCustomBindingHelper: Version 1.0.15.279-RC3: TelerikMvcGridCustomBindingHelper 1.0.15.279 RC3 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. Configurable null handling when filtering (AcceptNullValuesWhenFiltering, NullSubstitutes and NullAliases) Internal DynamicWhereClause improvments GridGridCustomBindingHelper.UseProjections method now acept ProjectionsOptions parameter for easely determine which properties should be projected Isolate and hide some are...JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y...Z3: Z3 4.1.2: Minor fixes. Now, z3 compiles with gcc 4.7.x.NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projects.NET 4.0 Object/Function DLL interface: A Visual Basic .NET 4.0 Object / Function interface for quick and easy updating.AzureDirectory Library for Lucene.Net: This project allows you to create Lucene Indexes via a Lucene Directory object which uses Windows Azure BlobStorage for persistent storage.Building Modern Mobile Web Apps: This project provides guidance on building mobile web experiences using HTML5, CSS3, and JavaScript. Developing web apps for mobile browsers can be less forgiviC# Singleton Base-Class: C# Singleton Base Class is a single, simple C# class used to implement the Singleton pattern through inheritance.C++ Unit Test Library for Windows Store apps with Async Helper: This Visual Studio extension will install a project template for C++ Unit Test Library for Windows Store apps that contains async helper.Citrix Mobile Application SDK Samples: This site contains our latest prototype samples for the Citrix Mobile Application SDK for you to play with.eBrain Engine: eBrain Engine is a software to administer neuropsychological tests by means of advanced I/F devices like BCI P300 and eye-tracking systemsFairycake: A game about a little witch. Java. FedEx Connector for AbleCommerce Gold: This plugin provides FedEx rating and tracking services for the AbleCommerce shopping cart.Free - Simple Phone Book (SimPB): An alternative to backup your telephone contacts. Portable, easy to use, multilingual.GPXLocalTime2UTC: Time Format Converter, from Local to UTC, for GPX Files A small utility made to open GPX files (XML), search for the "time" tag, then transform the local time Grid Solutions Framework: Core classes to manage, analyze, and visualize real-time and historical data. This project combines the time-series framework and TVA code library projects.HireMe: HireMe is a HR application that works in conjunction with the HiremeMagazine.com website. The app will run in Android, iOS and WebOS.my-sim-asdf: my greate toolOdeToFoodMvc4: Source code for "Building Applications with ASP.NET MVC 4"OrgCharts for SharePoint: Months of planning, design, development and testing have gone into a truly phenomenal Org Chart experiencePDC BW2: A pkm editor application that tries to make easier legal pkm Packed with Legality Analysis, Event downloader and more...PI Payroll system: This is a payroll system for People Index, LLC.Project13251011: fsdQuickWick.NET - Agile Pproject Management: QuickWick.NET is a simple and effective web-based solution for agile project management.SharePoint 2010 Top Nav: This project was created when a project I was on required a Navigation scheme to manage site collections. SisGAC: Sistema de Gerenciamento de Artigos para CongressosTriDes_project_3AO: encryptohideVB6Doc: Visual Basic 6 Documentor (VB6 Doc)VideoChat: Simple VideoChat web-application on ASP.NET MVC4, SignalR, Wowza Media Server/Windows Updater Open: This is an alternative to the Windows Update software on all versions of Windows OS and the WSUS provided for corporations to update multiple machines.WOWAddonsUpdater: WPF App to update lua addons for the Blizzard World of warcraft gameyygua: email:huliang@yahoo.cnZJUDTS2: ????Silverlight?????????

    Read the article

  • Google Chrome no longer treats " Web Apps" specially

    - by Adrian Petrescu
    I'm running Google Chrome (Dev Channel), with the --enable-apps flag, in both OSX and Ubuntu. I have four or five WebApps installed, and they appear in the "New Tab" page just fine. The problem is that, before, when the feature first became available in the Dev Channel, the actual tabs hosting the webapps received special treatment; they would have 3D Dock-like look, and (more importantly) the tab bar would be hidden while using that tab. Sometime in the last few weeks, however, it seems that the special treatment just disappeared with one of the daily updates. The webapps still show up in the New Tab page, they still work in the sense that they capture all URLs going to that webapp, and they use the right icons; but they've basically become indistinguishable from just a regularly pinned tab. The two special features mentioned above have disappeared, on both Ubuntu and OS X. My questions are simply: a) Does this happen to anyone else? When exactly did it begin? b) Why did Google regress the feature? c) Is there any flag I can enable to get it back?

    Read the article

  • SSH Keys Authentication keeps asking for password

    - by Rhyuk
    Im trying to set access from ServerA(SunOS) to ServerB(Some custom Linux with Keyboard Interactive login) with SSH Keys. As a proof of concept I was able to do it between 2 virtual machines. Now in my real life scenario it isnt working. I created the keys in ServerA, copied them to ServerB, chmod'd .ssh folders to 700 on both ServerA,B. Here is the log of what I get. debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: Peer sent proposed langtags, ctos: debug1: Peer sent proposed langtags, stoc: debug1: We proposed langtags, ctos: en-US debug1: We proposed langtags, stoc: en-US debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: dh_gen_key: priv key bits set: 125/256 debug1: bits set: 1039/2048 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'XXX.XXX.XXX.XXX' is known and matches the RSA host key. debug1: Found key in /XXX/.ssh/known_hosts:1 debug1: bits set: 1061/2048 debug1: ssh_rsa_verify: signature correct debug1: newkeys: mode 1 debug1: set_newkeys: setting new keys for 'out' mode debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: newkeys: mode 0 debug1: set_newkeys: setting new keys for 'in' mode debug1: SSH2_MSG_NEWKEYS received debug1: done: ssh_kex2. debug1: send SSH2_MSG_SERVICE_REQUEST debug1: got SSH2_MSG_SERVICE_ACCEPT debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /XXXX/.ssh/identity debug1: Trying public key: /xxx/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /xxx/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Password: Password: ServerB has pretty limited actions since its a custom propietary linux. What could be happening? EDIT WITH ANSWER: Problem was that I didnt have those settings enabled in the sshd_config (Refer to accepted answer) AND that while pasting the key from ServerA to ServerB it would interpret the key as 3 separate lines. What I did was, in case you cant use ssh-copy-id like I couldnt. Paste the first line of your key in your "ServerB" authorized_keys file WITHOUT the last 2 characters, then type yourself the missing characters from line 1 and the first one from line 2, this will prevent adding a "new line" between the first and second line of the key. Repeat with the 3d line.

    Read the article

  • AMD processors witn graphics card bundled [closed]

    - by shybovycha
    Sorry for posting this question here - just don't know to which StackExchange website i should be writing. I've heard AMD created processors with video card bundled. So now these processors should work as fast as just usual processors with discrete video card but AMD's ones should use less power and spread less warm. Some googling around gave me the result like "AMD processors of A-series". They were mentioned to be build using that technology i described above. But on the other hand, we have a small rate of publishing and not-very-good quality of AMD drivers. I am a game-developer and web-developer so i need a powerful processor and graphics card and a lot of RAM on board (to make it possible to create a sample Grails application, for example or to create some 3D models in Maya/Cinema4D, for instance). Still i want my battery to be a long-living one, so power usage is a bit critical for me. So, my questions are: are there any processor building technology like i've described and which series they are (if they exist)? which processor shall fit the laptop the best: AMD one or i5/i7 on with nVidia graphics card for the purposes mentioned above?

    Read the article

  • Mac always boots with incorrect display gamma (for years now including Lion)

    - by Alex Wayne
    I think somewhere, something got installed but I have no idea what or how to fix it :( Basically, my old MacBook Pro running 10.5 Leopard had a problem where on boot it would show everything on the screen in a very sort of crunched color space. Everything below 15% white would just be pure black, everything above 85% white would be pure white and all colors look to be a touch more saturated. It's garish. To fix it, I found that I could boot into almost any fullscreen 3D game. When the game launches, the colors would still be off, but when I then quite the game and return the desktop everything is normal again. I've noticed Blizzard games work most reliably for this (World of Warcraft or Starcraft2). This problem has followed me through the years. When I upgraded to an iMac I migrated everything over to it, and the issue now happens on the iMac too. I then got a new MacBook Pro for work and migrated my iMac over to that, and it has the problem too. I had thought that it was an OS bug, but upgrading to 10.6 Snow Leopard didn't fix it and neither did 10.7 Lion. Furthermore I can't find any reference on any forum or help site where anyone else has this problem. If anyone has any idea what processes or settings or apps I should look at to figure out why this is happening I should would appreciate it! It looks sort of irresponsible when I open my laptop in the office to work and then boot up Starcraft 2 full screen...

    Read the article

  • Force Installing a Radeon HD 2100 on Windows 8

    - by Click Ok
    I'm trying force installing a Radeon HD 2100 on Windows 8. I've found that link from AMD with the drivers for Windows7: http://support.amd.com/us/gpudownload/windows/legacy/Pages/legacy-radeonaiw-vista64.aspx I know too that AMD will stop support Radeon HD 400 and older: http://www.techspot.com/news/48321-amd-drops-windows-8-support-for-radeon-hd-4000-and-older.html Now, let's go to the problem. If I try install the 12.6 driver, Windows will stick with the "basic display adapter", and this is bad for 3d games like Minecraft, that runs really slow now compared with the previous Windows7 installation. Forcing install the catalyst driver can help to fix it. So, I follow that steps: Extract the Catalist Driver (C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql) Right click the "basic display adapter" on device manager, and "update driver" Search on PC I will choose the driver "With Disk" "C:\AMD\Support\12-6-legacy_vista_win7_64_dd_ccc_whql\Packages\Drivers\Display\W76A_INF" There is a big list of drivers and the nearest driver to HD 2100 is "Radeon HD 2350 Series" My questions: Why isn't "Radeon HD 2100 Series" listed? (or Where is it listed?) In theory it must be listed" The first link above show that "This article applies to the following configuration(s):" (...) "AMD Radeon HD 2000 Series" Am I doing something wrong?

    Read the article

  • Games on windows 8 in bootcamp lag even on lowest graphics

    - by Jackson Gariety
    I've been playing Crysis 2 and Skyrim on my Retina MacBookPro (10,1) for months now. The two games used to run super smoothly even on nearly maxed out settings. This laptop has an Nvidia GeForce GT 650M graphics card inside, it runs great. But I recently replaced my Windows 8 consumer preview with the retail copy, and since then, 3D games lag in this odd way, no matter what the graphics settings. Every second Skyrim and Crysis alternates between running smoothly and lagging. It's a cyclical lag that comes and goes like clockwork. I can turn the graphics down to 800x600 with no antialiasing and low texture quality, and it runs much smoother on the "up" motion of the cycle, but every second it moves back into this lag spike. I've tried installing beta graphics drivers, re installing the operating system, re installing the bootcamp support software, and freeing up space (I have about 20 GB free). I can't figure out what suddenly caused this other than some obscure difference between the consumer preview and the retail version. What can I try? Is my video card failing? Are there some other drivers I can install? This isn't normal lag from maxing out the card, it

    Read the article

  • Compiz & Linux compositing: how does it fit into the X architecture?

    - by Latanius
    Not a really "how to solve stuff" question, but... I was wondering how the modern X architecture works, with compiz & all. What I know about it: in the beginning, there was the X server, clients connected (presumably on TCP), and then sent messages to the server to instruct it to show windows etc. because this didn't work (at all? or just fast enough?) for OpenGL & 3D acceleration, additional APIs were created for direct rendering (DRI? and, in addition to the X server, what things did the X clients talk to to render stuff and through what interfaces?) and, finally, enter Compiz: X clients end up (somehow) rendering to OpenGL textures, which is then put together to form a fancy-looking screen with translucent windows, and rendered to the screen. What I'm especially interested in is what components does the system have and how do they connect to each other? Like... if there is a box labelled "compiz" in the system... is it inside the X server? If it's not, how do the rendered images from the apps end up in it? And where does it render to? Is that another X server? Or DRI? Of course, I'd be equally happy if pointed to some docs capable of clearing up the confusion described above (conditional on they being significantly shorter than book-sized entities).

    Read the article

  • Windows 7 host with Ubuntu Guest and a performance hit, memory locks?

    - by Cyrylski
    I have a brand new Lenovo T510 with Core i5 and 4GB of RAM with Windows 7 on it. I Installed Ubuntu 10.10 in a Virtualbox. For some reason system gets really slow on this setup which makes me really angry. There's a video card shared with full 3D support enabled and 1GB of RAM allocated for the Ubuntu machine. It may sound stupid, but WHY is the whole memory consumed in an instant when I run Virtualbox? I struggled for like 10 minutes restraining myself from a brutal reset, and now everything runs smooth but memory "in use" in Resource Monitor is 3GB flat with only Chrome running. I'm new to Windows 7, but I'm really disappointed with performance at this point... I used to work in a different environment with much slower hardware and there was no such problem (WinXP over Ubuntu, 1GB out of 2GB allocated for WinXP guest on intel GMA). This is, until I clogged RAM totally there. But I was capable of running Chrome, Firefox and Apache server on a 1GB RAM in Ubuntu there and Photoshop CS4 on Windows XP and it worked. In this case I can't go beyond setting up Ubuntu properly. I bet I'm doing something wrong.

    Read the article

  • Ubuntu 12.04 VirtualBox on powerful W7 quite slow

    - by wnstnsmth
    I own a Thinkpad T420s with 8GB RAM, 160 GB SSD and a quite fast i7 processor. Summa summarum a very fast computer that works perfectly. Now, I am not very impressed by the performance of my Ubuntu 12.04 virtual machine running on VirtualBox 4.1.18. I assume that Virtual Machines are always a bit slower than the guest system, still I think it should be more performant given the hardware settings I give it: 4096 MB RAM 1 CPU without CPU limitation (I would like to give it more but then it does not seem to work - I am not experienced in this maybe somebody could give me advice on this too) Activated PAE/NX, VT-x/AMD-V and Nested Paging 96 MB Graphics Memory (no 2D or 3D acceleration) ~ 14 GB disk space, currently about 7 GB are used Maybe I misconfigured something, could you give me a hint please? Thanks! Edit: What I mean by slow is that for example switching tabs in the browser (whether FF or Chrome) only goes with a 0.5s delay or something, as well as switching application windows and/or double-clicking applications in the dock to get all open windows.. opening Aptana takes about a minute whereas opening something like Photoshop on the guest system takes 5 seconds

    Read the article

  • Visual Studio 2010 error: Type universe cannot resolve assembly

    - by dthrasher
    I've loaded a WPF project initially created in Visual Studio 2008 into Visual Studio 2010. The conversion process goes smoothly, but on certain XAML files the VS2010 designer throws several errors related to project references, including this one: System.Reflection.Adds.UnresolvedAssemblyException Type universe cannot resolve assembly: GalaSoft.MvvmLight, Version=3.0.0.31869, Culture=neutral, PublicKeyToken=3e875cdb3903c512. This assembly reference works just fine in the Expression Blend 4 designer, but not in VS2010. I can build and run the solution successfully. My solution targets the .Net Framework 3.5 SP1.

    Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >